www.hales.com.au
ContentsContents
Suppliers to the Tooling & Plastic Industry 1
Polishing Stones ..........................................................................................................................................................2
Boride Polishing Stones..........................................................................................................................................................................................................2
Super Stones.......................................................................................................................................................................................................................................3
Polishing Accessories.............................................................................................................................................4
Combination Stone ......................................................................................................................................................................................................................4
Stone Holders.....................................................................................................................................................................................................................................4
Super Stone Holder .....................................................................................................................................................................................................................4
BoriLube....................................................................................................................................................................................................................................................4
Felt Bobs and Cones.................................................................................................................................................................................................................5
Diamond Paste..................................................................................................................................................................................................................................6
Diamond Thinner ............................................................................................................................................................................................................................6
Mounted Points.............................................................................................................................................................................................................................7-8
Diamond Point Sets.....................................................................................................................................................................................................................9
Rubbing Points...................................................................................................................................................................................................................................9
Solid Carbide Burs ....................................................................................................................................................................................................................10
Precision Air Grinders ...........................................................................................................................................................................................................11
Air Polisher ...........................................................................................................................................................................................................................................12
Ultrasonic Polisher......................................................................................................................................................................................................................12
Abrasives .........................................................................................................................................................................13
Wet & Dry..............................................................................................................................................................................................................................................13
Abraisive Roll.....................................................................................................................................................................................................................................13
Files ......................................................................................................................................................................................14
Needle Files .......................................................................................................................................................................................................................................14
Rifler Files.....................................................................................................................................................................................................................................15-21
Diamond Files .................................................................................................................................................................................................................................21
Diamond Rifler File Set ........................................................................................................................................................................................................22
Engineer Files..................................................................................................................................................................................................................................22
www.hales.com.au
Boride Polishing Stones
Suppliers to the Tooling & Plastic Industry
Polis
hing S
tones
2
AM2Most popular all round finishing stone suitable for all types of mould & diesteels.Sizes
1/8 x 1/8 x 6' 1/4 x 1/4 x 6' 1/2 x 1/2 x 6' 1 x 1 x 6' 1/4 ROUND1/8 x 1/4 x 6' 1/4 x 1/2 x 6' 1/2 x 1 x 6' 3/8 ROUND1/8 x 1/2 x 6' 1/4 x 1 x 6' 1/2 ROUND1/8 x 1 x 6'Grit :100, 150, 180, 220, 320, 400, 600, 900
AM8Designed for removing EDM scale on all types of mould & die steel.
Sizes
1/8 x 1/4 x 6' 1/4 x 1/4 x 6' 1 x 1 x 6'1/8 x 1/2 x 6' 1/4 x 1/2 x 6'
Grit :100, 120, 150, 220, 320, 400, 600
T2A medium-hard aluminium oxide stone that cuts very fast yet providing asilky smooth finish on quality mould steel such as P-20, H-13 & 420stainless.
Sizes
1/8 x 1/4 x 6' 1/4 x 1/4 x 6'1/8 x 1/2 x 6' 1/4 x 1/2 x 6'
Grit : 150, 220, 320, 400, 600,
CSFast cutting black silicone carbide general purpose polishing stone, used onall tool steels as well as used for roughing out on non-ferrous materials.
Sizes
1/8 x 1/4 x 6' 1/4 x 1/4 x 6' 1/2 x 1/2 x 6' 1 x 1 x 6'1/8 x 1/2 x 6' 1/4 x 1/2 x 6'
Grit :120, 150, 180, 220, 320, 400, 600
AOA perfect all-round aluminium oxide polishing stone with excellent breakdowncharacteristics and yet retains shape well, great for mould cavity detail.
Sizes
1/8 x 1/2 x 6' 1/4 x 1/4 x 6' 1/2 x 1/2 x 6' 1/4 ROUND1/4 x 1/2 x 6' 1/2 x 1 x 6'
Grit : 120, 150, 220, 320, 400, 600
www.hales.com.au
SuperstonesPolish
ing S
tones
Suppliers to the Tooling & Plastic Industry 3
Hales Super Stones are made from long ceramic fibres embedded in thermoset resin. They exhibitsuperior strength compared to normal abrasive stones.• Hales Super Stones have high tensile strength yet can be flexed without breaking, enabling fracture-free polishing of detailed areas, such as narrow slots and ribs.• Hales Super Stones have incomparable polishing ability, producing fine surface finishes with minimal wear.• Hales Super Stones, combined with ultrasonic polishers, offer aggressive stock removal.
DIMENSIONS GOLD180#
L/BROWN300#
ORANGE400#
BROWN600#
BLUE800#
WHITE1000#
RED1200#
1mm x 2mm x 150 • • • • • • •1mm x 6mm x 150 • • • • • • •1mm x 10mm x 150 • • • • • • •
FLAT
www.hales.com.auSuppliers to the Tooling & Plastic Industry
Polis
hing Acc
ess
ories
4
Combination StoneCombi stones are ideal for the t oolmaker to carry in the top pocket. These oil filled stones are great for honing, sharpening and deburring. Combines 120 and 320 grits.
Part Number Description
COMSTONE 16 x 41 x 114
ZCS 25 x 50 x 200
Hand-Held Stone Holder
Much of a polishing stone is discardeddue to a breakage or because it hasbecome too short to hold. This stoneholder supports the stone, affordsexcellent control and allows the stone tobe used to a short length.
SSH2
SSH6
SSH10
Super Stone Holder
Stone holder for use with 10mm wide stones
Stone holder for use with 2mm wide stones
Stone holder for use with 6mm wide stones
Bori-Lube 10 Polishing Lubricant
BORI-LUBE 10 is formulated for mouldpolishing to clean, lubricate and preventstone loading. Environmentally friendly andnon-hazardous.
Part No.
Part No.
Part No.
www.hales.com.au
Felt Bobs and ConesPolish
ing Acce
ssorie
s
Suppliers to the Tooling & Plastic Industry 5
CONE (FC)BOB (FB)
Medium Grade Felt
Size Dia.FB1414 1/4
Size Length1/4
Shank1/8
FB14516 1/4 5/16 1/8
FB1212 1/2 1/2 1/8
FB121 1/2 1 1/8
FB3434 3/4 3/4 1/8
FB11 1 1 1/4
Hard Grade Felt
Size Dia.FBH1212 1/4
Size Length1/4
Shank1/8
FBH3838 3/8 3/8 1/8
FBH1212 1/2 1/2 1/8
FBH3434 3/4 3/4 1/4
Medium Grade Felt
Size Dia. Size Length ShankFC14 1/4 5/8 1/8
FC24 3/8 7/8 1/8
FC12 1/2 1 1/8
FC58 5/8 1 1/4 1/8
www.hales.com.au
Diamond Paste
Suppliers to the Tooling & Plastic Industry
Diamond Thinner
Polis
hing Acc
ess
ories
6
Hales Diamond Compound contains the finest grades of diamond particles. The result is the best concentration.
Part No. Micron Size MeshConcentration Colour Recommendations
DP01 1 14,000 LIGHT BLUE For the finest finish on all tooling
DP03 3 8,000 GREEN
DP06 6 3,000 YELLOW Commercial finish for most tooling
DP09 9 18,000 RED
DP15 15 12,000 LIGHT BROWN
DP30 30 750 DARK BROWN First stage on all materials
DP45 45 325 PURPLE
DP60 60 250 ORANGE Stock removed
Part No. Description
DPT 16 16 ounce bottle
Hales Diamond Thinner is used to thinthe slurry, extend the compound andreduce gumming.
www.hales.com.au
Polish
ing Acce
ssorie
s
Suppliers to the Tooling & Plastic Industry 7
Mounted Points
Part Number Diameter Thick Mandrel
MP-W142 3/32 1/4 1/8
MP-W144 1/8 1/4 1/8
MP-W145 1/8 3/8 1/8
MP-W146 1/8 1/2 1/8
MP-W149 5/32 1/4 1/8
MP-W152 3/16 1/2 1/8
MP-W153 3/16 3/8 1/8
MP-W154 3/16 1/2 1/8
MP-W159 1/4 3/16 1/8
MP-W160 1/4 1/4 1/8
MP-W162 1/4 3/8 1/8
MP-W163 1/4 1/2 1/8
MP-W164 1/4 3/4 1/8
MP-W167 5/16 1/4 1/8
MP-W170 5/16 1/2 1/8
MP-W173 3/8 1/8 1/8
MP-W174 3/8 1/4 1/8
MP-W175 3/8 3/8 1/8
MP-W176 3/8 1/2 1/8
MP-W177 3/8 3/4 1/8
MP-W182 1/2 1/8 1/8
MP-W184 1/2 3/8 1/8
MP-W185 1/2 1/2 1/8
MP-W186 1/2 3/4 1/4
MP-W187 1/2 1 1/4
MP-W188 1/2 1 1/2 1/4
MP-W197 5/8 2 1/4
MP-W200 3/4 1/8 1/8
MP-W201 3/4 1/4 1/8
MP-W202 3/4 3/8 1/4
MP-W203 3/4 1/2 1/4
MP-W204 3/4 3/4 1/4
MP-W205 3/4 1 1/4
MP-W215 1 1/8 1/8
MP-W216 1 1/4 1/4
MP-W218 1 1/2 1/4
MP-W219 1 3/4 1/4
MP-W220 1 1 1/4
MP-W227 1 1/4 1/2 1/4
“W” Shapes
All W Shapes are basicallyrectangular or square.
The diameter (D) and thickness (T).
MP-B41
MP-B42
5/8
1/2
5/8
3/4
1/8
1/8
MP-B43
MP-B44
1/4
7/32
5/16
3/8
1/8
1/8
MP-B45
MP-B51
3/16
7/16
5/16
3/4
1/8
1/8
MP-B52
MP-B53
3/8
1/4
3/4
5/8
1/8
1/8
MP-B55
MP-B71
1/8
5/8
1/4
1/8
1/8
1/8
MP-B72
MP-B81
1/2
3/4
1/8
3/16
1/8
1/8
MP-B82
MP-B92
1/2
1/4
1/4
1/4
1/8
1/8
MP-B96
MP-B97
1/8
1/8
1/4
3/8
1/8
1/8
MP-B98
MP-B105
3/32
1/4
1/4
1/4
1/8
1/8
MP-B121
MP-B123
1/2
3/16
1/2
3/16
1/8
1/8
MP-B124
MP-B125
1/8
1/4
1/8
1/4
1/8
1/8
Part Number Diameter Thick MandrelMP-B41 MP-B42 MP-B43 MP-B44
MP-B45 MP-B51 MP-B52 MP-B53
MP-B55 MP-B71 MP-B72 MP-B81
MP-B82 MP-B92 MP-B96 MP-B97
MP-B98 MP-B105 MP-B121 MP-B122
MP-B123 MP-B124 MP-B125
Part Number Diameter Thick MandrelA-1 A-3 A-4 A-11
A-12 A-14 A-25 A-26
A-36 A-38
A-1 3/4 2-1/2 1/4
A-3 1 2-3/4 1/4
A-4 1-1/4 1-1/4 1/4
A-11 7/8 2 1/4
A-12 11/16 1-1/4 1/4
A-14 11/16 7/8 1/4
A-25 1 ROUND
A-26 5/8 ROUND
A-36 1-5/8 3/8 1/4
A-38 1 1 1/4
Mounted Points
www.hales.com.auSuppliers to the Tooling & Plastic Industry
Polis
hing Acc
ess
ories
8
Diamond Point Sets
P
Part Number Description
DP 30 Medium grit diamond plated mounted
points picked to suit the toolmaker, sold in
a plastic case.
www.hales.com.au
Polish
ing Acce
ssorie
s
Suppliers to the Tooling & Plastic Industry 9
Rubbing Points
Product Code Product Title
RP6120 6 x 17 x 120G RUBBING POINTS GREEN
RP6180 6 x 17 x 180G RUBBING POINTS YELLOW
RP8120 8 x 20 x 120G RUBBING POINTS GREEN
RP8180 8 x 20 x 180G RUBBING POINTS YELLOW
RP10120 10 X 20 X120G RUBBING POINTS GREEN
RP10180 10 X 20 X180G RUBBING POINTS YELLOW
RP20120 20 X 25 X120G RUBBING POINTS GREEN
RP20180 20 X 25 X180G RUBBING POINTS YELLOW
Solid Carbide Burs
Part No. Shank Overall Cutting Flute TaperDiameter Length Diameter Length
1C 1/8” 1 1/2” 3/32” 7/16”
2C 1/8” 1 1/2” 1/8” 9/16”
2C EC 1/8” 1 1/2” 1/8” 9/16”
3C 1/8” 1 1/2” 1/8” 9/16”
4C 1/8” 1 1/2” 1/8” 3/8”
5C 1/8” 1 1/2” 1/8” 1/2”
6C 1/8” 1 1/2” 1/8” 11/32” 12
7C 1/8” 1 1/2” 3/32” 7/16”
8C 1/8” 1 1/2” 1/8” 1/8”
9C 1/8” 1 1/2” 1/8” 7/32”
10C 1/8” 1 1/2” 1/8” 1/2”
11C 1/8” 1 1/2” 1/8” 5/8” 7
12C 1/8” 1 1/2” 1/8” 3/16” 10
13C 1/8” 1 1/2” 1/16” 1/4”
15C 1/8” 1 1/2” 3/32” 3/32”
2C EC2C1C
5C4C3C
8C7C6C
11C10C9C
15C13C12C
Part repaTetulFgnittuCllarevO.oNLength Diameter Length
1P 1/8” 1/4” 1/2”
”2/1”4/1”8/1P2
”2/1”4/1”8/1P3
”2/1”4/1”8/1P4
22”2/1”4/1”8/1P5
6P E/C 1/8” 1/4” 3/16”
”4/1”4/1”8/1P7
”8/3”4/1”8/1P8
3P2P1P
6P E/C5P4P
8P7P
www.hales.com.auSuppliers to the Tooling & Plastic Industry
Polis
hing Acc
ess
ories
10
www.hales.com.au
Polish
ing Acce
ssorie
s
Suppliers to the Tooling & Plastic Industry 11
Part Number Description
LDG5202 54,000 RPM Economy Air Grinder
Part Number Description
AG This Air Grinder is the ultimate in precision
air grinders, 64,000 RPM, ideal for quality
tool room work.
Part Number Description
LDG7101 1200 Angle Grinder. Standard accessories
are cup wheels, a rubber pad and
abrasive discs.
Precision Air Grinders
www.hales.com.au
Air Polisher
Suppliers to the Tooling & Plastic Industry
Ultrasonic Polisher
Polis
hing Acc
ess
ories
12
AR991 0 - 6mm Stroke 4500 Strokes per minute
Full Comprehensive Details Available
Part Number Description
www.hales.com.au
Abrasive
s
Suppliers to the Tooling & Plastic Industry 13
Abrasive
sWet and Dry
Quality Abrasive Roll
Part Number Description
WD0080 80 Grit Wet / Dry Paper
WD0100 100 Grit Wet / Dry Paper
WD0120 120 Grit Wet / Dry Paper
WD0150 150 Grit Wet / Dry Paper
WD0180 180 Grit Wet / Dry Paper
WD0220 220 Grit Wet / Dry Paper
WD0240 240 Grit Wet / Dry Paper
WD0280 280 Grit Wet / Dry Paper
WD0320 320 Grit Wet / Dry Paper
WD0400 400 Grit Wet / Dry Paper
Part Number Description
WD0500 500 Grit Wet / Dry Paper
WD0600 600 Grit Wet / Dry Paper
WD0800 800 Grit Wet / Dry Paper
WD1000 1000 Grit Wet / Dry Paper
WD1200 1200 Grit Wet / Dry Paper
Part Number Description
ER25060 25MM X 60# Economy Roll
ER25080 25MM X 80# Economy Roll
ER25120 25MM X 120# Economy Roll
ER25180 25MM X 180# Economy Roll
ER25240 25MM X 240# Economy Roll
ER25320 25MM X 320# Economy Roll
ER40060 40MM X 60# Economy Roll
ER40080 40MM X 80# Economy Roll
ER40120 40MM X 120# Economy Roll
ER40180 40MM X 180# Economy Roll
ER40240 40MM X 240# Economy Roll
ER40320 40MM X 320# Economy Roll
Part Number Description
ER50060 50MM X 60# Economy Roll
ER50080 50MM X 80# Economy Roll
ER50100 50MM X 100# Economy Roll
ER50120 50MM X 120# Economy Roll
ER50180 50MM X 180# Economy Roll
ER50240 50MM X 240# Economy Roll
ER50320 50MM X 320# Economy Roll
Economy Roll
Part Number Description
AR20180 2 X 180 Grit Abrasive Roll
AR20240 2 X 240 Grit Abrasive Roll
Part Number Description
AR10060 1 X 60 Grit Abrasive Roll
AR10080 1 X 80 Grit Abrasive Roll
AR10120 1 X 120 Grit Abrasive Roll
AR10180 1 X 180 Grit Abrasive Roll
AR10240 1 X 240 Grit Abrasive Roll
AR20060 2 X 60 Grit Abrasive Roll
AR20080 2 X 80 Grit Abrasive Roll
AR20120 2 X 120 Grit Abrasive Roll
www.hales.com.auSuppliers to the Tooling & Plastic Industry
File
s
14
Needle Files
B122O (Cut O) B1222 (Cut 2) - FLAT 160mm Long
B121O (Cut O) B1212 (Cut 2) - EQUALLING 160mm Long
B1230 (Cut O) B1232 (Cut 2) - HALF-ROUND 160mm Long
B1240 (Cut O) B1242 (Cut 2) - THREE-SQUARE 160mm Long
B1250 (Cut O) B1252 (Cut 2) - SQUARE 160mm Long
B1260 (Cut O) B1262 (Cut 2) - ROUND 160mm Long
B1270 (Cut O) B1272 (Cut 2) - KNIFE 160mm Long
B1280 (Cut O) B1282 (Cut 2) - CROSSING 160mm Long
B1290 (Cut O) B1292 (Cut 2) - JOINT 160mm Long
B1300 (Cut O) B1302 (Cut 2) - OVAL 160mm Long
B1310 (Cut O) B1312 (Cut 2) - CROCHET 160mm Long
B1320 (Cut O) B1322 (Cut 2) - BARRETT 160mm Long
www.hales.com.au
File
s
Suppliers to the Tooling & Plastic Industry 15
B7000 (Cut O) B7002 (Cut 2) 180mm Long
B7010 (Cut O) B7012 (Cut 2) 180mm Long
B7100 (Cut O) B7102 (Cut 2) 180mm Long
B7110 (Cut O) B7112 (Cut 2) 180mm Long
B7120 (Cut O) B7122 (Cut 2) 180mm Long
B7130 (Cut O) B7132 (Cut 2) 180mm Long
B7310 (Cut O) B7312 (Cut 2) 180mm Long
B7320 (Cut O) B7322 (Cut 2) 180mm Long
B7400 (Cut O) B7402 (Cut 2) 180mm Long
B7410 (Cut O) B7412 (Cut 2) 180mm Long
Diemaker’s Riffler Files
www.hales.com.auSuppliers to the Tooling & Plastic Industry
File
s
16
Diemaker’s Riffler FilesB7500 (Cut O) B7502 (Cut 2) 180mm Long
B7600 (Cut O) B7602 (Cut 2) 180mm Long
B7610 (Cut O) B7612 (Cut 2) 180mm Long
B7620 (Cut O) B7622 (Cut 2) 180mm Long
B7630 (Cut O) B7632 (Cut 2) 180mm Long
B7640 (Cut O) B7642 (Cut 2) 180mm Long
B7700 (Cut O) B7702 (Cut 2) 180mm Long
B7710 (Cut O) B7712 (Cut 2) 180mm Long
B7810 (Cut O) B7812 (Cut 2) 180mm Long
www.hales.com.au
File
s
Suppliers to the Tooling & Plastic Industry 17
Diemaker’s Riffler Files
B9140 (Cut O) B9142 (Cut 2) 150mm Long
B9130 (Cut O) B9132 (Cut 2) 150mm Long
B9120 (Cut O) B9122 (Cut 2) 150mm Long
B9110 (Cut O) B9112 (Cut 2) 150mm Long
B9010 (Cut O) B9012 (Cut 2) 150mm Long
B9000 (Cut O) B9002 (Cut 2) 150mm Long
B7950 (Cut O) B7952 (Cut 2) 180mm Long
B7900 (Cut O) B7902 (Cut 2) 180mm Long
B9150 (Cut O) B9152 (Cut 2) 150mm Long
www.hales.com.auSuppliers to the Tooling & Plastic Industry
File
s
18
Diemaker’s Rifflers
B9510 (Cut O) B9512 (Cut 2) 150mm Long
B9180 (Cut O) B9182 (Cut 2) 150mm Long
B9300 (Cut O) B9302 (Cut 2) 150mm Long
B9310 (Cut O) B9312 (Cut 2) 150mm Long
B9400 (Cut O) B9402 (Cut 2) 150mm Long
B9410 (Cut O) B9412 (Cut 2) 150mm Long
B9420 (Cut O) B9422 (Cut 2) 150mm Long
B9430 (Cut O) B9432 (Cut 2) 150mm Long
B9170 (Cut O) B9172 (Cut 2) 150mm Long
B9160 (Cut O) B9162 (Cut 2) 150mm Long
www.hales.com.au
File
s
Suppliers to the Tooling & Plastic Industry 19
Diemaker’s RifflersB9520 (Cut O) B9522 (Cut 2) 150mm Long
B9530 (Cut O) B9532 (Cut 2) 150mm Long
B9540 (Cut O) B9542 (Cut 2) 150mm Long
B9550 (Cut O) B9552 (Cut 2) 150mm Long
B9560 (Cut O) B9562 (Cut 2) 150mm Long
B9570 (Cut O) B9572 (Cut 2) 150mm Long
B9610 (Cut O) B9612 (Cut 2) 150mm Long
B9630 (Cut O) B9632 (Cut 2) 150mm Long
B9640 (Cut O) B9642 (Cut 2) 150mm Long
B9650 (Cut O) B9652 (Cut 2) 150mm Long
www.hales.com.auSuppliers to the Tooling & Plastic Industry
File
s
20
Diemaker’s Rifflers
B9830 (Cut O) B9832 (Cut 2) 150mm Long
B9840 (Cut O) B9842 (Cut 2) 150mm Long
B9850 (Cut O) B9852 (Cut 2) 150mm Long
B9720 (Cut O) B9722 (Cut 2) 150mm Long
B9730 (Cut O) B9732 (Cut 2) 150mm Long
B9740 (Cut O) B9742 (Cut 2) 150mm Long
B9750 (Cut O) B9752 (Cut 2) 150mm Long
B9800(Cut O) B9802 (Cut 2) 150mm Long
B9810 (Cut O) B9812 (Cut 2) 150mm Long
B9820 (Cut O) B9822 (Cut 2) 150mm Long
B9700 (Cut O) B9702 (Cut 2) 150mm Long
B9710 (Cut O) B9712 (Cut 2) 150mm Long
www.hales.com.au
File
s
Suppliers to the Tooling & Plastic Industry 21
B9860 (Cut O) B9862 (Cut 2) 150mm Long
B9870 (Cut O) B9872 (Cut 2) 150mm Long
B9900 (Cut O) B9902 (Cut 2) 150mm Long
B9960 (Cut O) B9962 (Cut 2) 150mm Long
Diemaker’s Rifflers
Overall Length 140mm
Shank 3mm
Flat Round
Triangle Knife
Square Oval
HalfRound Lozenge
Diamond Needle Files
Diamond Rifflers
Engineer Files
Hales stock a comprehensive range of Quality Engineer Files:-Hand File For finishing flat Surfaces
Round File For circular openings and concave surfaces
Half round File For flat, concave and convex surfaces
Flat File For general work on iron, steel etc.
Warding File For ward notches in keys and narrow places
Square File For filing slots, key seats and general surface filing
Mill File For drawn filing in machine shops, fine finishing and tool sharpening
Three grades of file cuts available:- Smooth - Second Cut - Bastard. File handles are also available.
Part Number Description
DR Set of 10
www.hales.com.auSuppliers to the Tooling & Plastic Industry
File
s
22
Notes
www.hales.com.au
Notes
Suppliers to the Tooling & Plastic Industry 23
www.hales.com.auSuppliers to the Tooling & Plastic Industry
Chart
24