www.halesmastip.co.uk
ContentsC
on
ten
ts
1
Ejectors .....................................................................2Straight Ejector Pins - Nitrided (EP)......................................................2
Stepped Ejector Pins - Nitrided (CNS)..............................................3
Ejector Sleeves - Nitrided (ES)...................................................................4
Blade Ejector Pins - Nitrided (FN) ..........................................................5
Straight Ejector Pins - Hardened (AHP) ...........................................6
Stepped Ejector Pins - Hardened (CH)............................................7
Ejector Sleeves - Hardened (SH) ............................................................8
Blade Ejector Pins - Hardened (FH) ....................................................9
Conical Head Pins (DH)..................................................................................10
Custom Straight Ejector & Core Pins .............................................11
Custom Stepped Pins .......................................................................................12
Custom Ejector Sleeves .................................................................................13
Moulds.....................................................................14Euro Standard Mould Bases 1515 ......................................................14
Euro Standard Mould Bases 1919......................................................15
Euro Standard Mould Bases 1929 ....................................................16
Euro Standard Mould Bases 2424....................................................17
Euro Standard Mould Bases 2434 ...................................................18
Euro Standard Mould Bases 2929 ...................................................19
Euro Standard Mould Bases 2939 ..................................................20
Euro Standard Mould Bases 3434...................................................21
Special Machining................................................................................................22
Alignment.............................................................23Guide Pillars - W20....................................................................................23-26
Guide Pillars - W21.....................................................................................27-29
Guide Bushes - W31..........................................................................................30
Guide Bushes - W32..........................................................................................31
Centering Sleeves - W30 .............................................................................32
Taper Locks ..................................................................................................................33
Taper Interlocks........................................................................................................34
Side Locks .....................................................................................................................35
Coated Side Lock..................................................................................................36
Mould Accessories......................................37Slide Holding Devices .............................................................................37-40
Slide Construction Kits.....................................................................................41
Slide Units ......................................................................................................................42
Sprung Core................................................................................................................43
Flexible Core ...............................................................................................................44
Vertical Lifter Block ..............................................................................................45
Plate Accelerator ....................................................................................................46
Slide Retainer..............................................................................................................47
Modular Retainer....................................................................................................48
Ejector Couplers .....................................................................................................49
Cooling Products ..........................................50Cooling Products..........................................................................................50-52
Cooling Circuit Plugs.........................................................................................53
Crimped Hose Assemblies........................................................................54
Heat Transfer Rods..............................................................................................55
Quick Connect Water Jumpers.............................................................56
Telescopic Water Fittings ..............................................................................57
Hot Runner .........................................................58SX Nozzle........................................................................................................................58
MX Nozzle ......................................................................................................................59
BX Nozzle .......................................................................................................................60
SVG Valve Gate ........................................................................................................61
MVG Valve Gate ......................................................................................................62
Manifold Systems..................................................................................................63
General ..................................................................64Hydraulic Cylinders....................................................................................64-65
Date Stamp..................................................................................................................66
Date Insert .....................................................................................................................66
Double Date Stamp............................................................................................67
Reference Insert ......................................................................................................68
Air Poppets ....................................................................................................................69
Double Valve ...............................................................................................................69
Tunnel Gate Inserts ..............................................................................................70
Limit Switches ....................................................................................................71-73
Aerosols....................................................................................................................74-76
Raymond Die Springs..............................................................................77-87
Table of ISA Standard Tolerances in Microns ......................88
Volume 1 / Nov 2008
www.halesmastip.co.uk
Straight Ejector Pins - Nitrided (EP)E
ject
ors
2
1.01.21.51.62.02.22.42.52.73.03.13.23.53.74.04.14.24.55.05.15.25.45.56.06.16.26.56.77.07.58.08.18.28.59.09.510.010.110.210.511.012.012.212.514.016.018.020.025.0
2.52.5334455566677888810101010101212121212121214141414141416161616161820202222242632
1.21.21.51.52222233333333333333555555555555555555777777810
0.20.20.20.20.20.20.20.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.80.80.80.80.8111
RPartNumber
EP
MATERIAL: WAS 1.2344 Hotwork Die Steel
STANDARD: DIN 1530-A/ISO 6751
HARDNESS:Surface: Nitrided to >_ HV 950o and Bright polishedCore: Hardened throughout to >_ 1400N/mm2
Pins over 60mm can be supplied cut to finished length, ask for details.
Stock Also available
www.halesmastip.co.uk
Stepped Ejector Pins - Nitrided (CNS)E
jecto
rs
3
d2
d1d
3
L1
L2
Rz 2,5
K
60°
Type: E05Standard: DIN1530-C / ISO8694Material: 1.2344 Hot Work Die SteelHardness:
Head = HRC45+/-5Core = HRC40+/-5Surface = HRC64-75 Bright Nitrided
Type: E06Standard: DIN1530-CH / ISO8694Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
CNS
PartNumber
d 2
d 1
d 3
L1
L2
Rz 2,5
K
60°
Type: E05Standard: DIN1530-C / ISO8694Material: 1.2344 Hot Work Die SteelHardness:
Head = HRC45+/-5Core = HRC40+/-5Surface = HRC64-75 Bright Nitrided
Type: E06Standard: DIN1530-CH / ISO8694Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
CH
PartNumber
MATERIAL: WAS 1.2344 Hotwork Die Steel
STANDARD: DIN 1530-C/ISO 8694
HARDNESS:Surface: Nitrided to >_ HV 950o
Core: Hardened throughout to >_ 1400N/mm2
Stock Also available
www.halesmastip.co.uk
Ejector Sleeves - Nitrided (ES)E
ject
ors
4
r
r
ES
rPartNumber
SH
rPartNumber
MATERIAL: WAS 1.2344 Hotwork Die Steel
STANDARD: DIN 16756/ISO 8405
HARDNESS:I.D. & O.D. Nitrided to >_ HV 950 HV
Pins over 60mm can be supplied cut to finished length, ask for details.Stock Also available
www.halesmastip.co.uk
Blade Ejector Pins - Nitrided (FN)E
jecto
rs
5
d2
d1
L1
L2
K
ax
b
a -0.015
b-0
.01
5
FN
PartNumber
d 2
d 1
L1
L2
K
ax
b
a -0.015
b-0
.015
FN
PartNumber
MATERIAL: WAS 1.2344 Hotwork Die Steel
STANDARD: DIN 1530-F/ISO 8693
HARDNESS:Surface: Nitrided to >_ HV 950o
Core: Hardened throughout to >_ 1400N/mm2
Stock Also available
www.halesmastip.co.uk
Straight Ejector Pins - Hardened (AHP)E
ject
ors
6
1.01.11.21.31.41.51.61.71.81.92.02.12.22.42.52.72.83.03.13.23.33.53.74.04.24.44.54.75.05.15.25.35.55.76.06.16.26.57.07.27.58.08.28.59.010.010.210.511.012.012.212.513.014.016.018.020.0
2.52.52.533333334445555666677888881010101010101212121212121214141414161616161818182022222426
1.21.21.21.51.51.51.51.51.51.522222223333333333333333355555555555555577777778
0.20.20.20.20.20.20.20.20.20.20.20.20.20.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.30.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.80.80.80.80.8111
RL1 +2Part
Number
AHP
MATERIAL: WAS 1.2210 Through Hardened Steel
STANDARD: DIN 1530 AH
HARDNESS:Throughout Hardened to 60 +_ 2 HRC
Pins over 60mm can be supplied cut to finished length, ask for details.
Stock Also available
www.halesmastip.co.uk
Stepped Ejector Pins - Hardened (CH)E
jecto
rs
7
d2
d1d
3
L1
L2
Rz 2,5
K
60°
Type: E05Standard: DIN1530-C / ISO8694Material: 1.2344 Hot Work Die SteelHardness:
Head = HRC45+/-5Core = HRC40+/-5Surface = HRC64-75 Bright Nitrided
Type: E06Standard: DIN1530-CH / ISO8694Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
CH
PartNumber
d 2
d 1
d 3
L1
L2
Rz 2,5
K
60°
Type: E05Standard: DIN1530-C / ISO8694Material: 1.2344 Hot Work Die SteelHardness:
Head = HRC45+/-5Core = HRC40+/-5Surface = HRC64-75 Bright Nitrided
Type: E06Standard: DIN1530-CH / ISO8694Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
CH
PartNumber
MATERIAL: WAS 1.2210 Through Hardened Steel
STANDARD: DIN 1530 CH/ISO 8694
HARDNESS:Throughout Hardened to HRC60 +_ 2
Stock Also available
www.halesmastip.co.uk
Ejector Sleeves - Hardened (SH)E
ject
ors
8
r
r
ES
SH
rPartNumber
MATERIAL: WAS 1.2210 Through Hardened Steel
STANDARD: DIN 16756/ISO 8405
HARDNESS:Throughout Hardened at HRC60 +_ 2
Pins over 60mm can be supplied cut to finished length, ask for details.Stock Also available
www.halesmastip.co.uk
Blade Ejector Pins - Hardened (FH) E
jecto
rs
9
Type: E08Standard: DIN1530-FH / ISO8693Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
d 2
d 1
L1
L2
K
ax
b
a -0.015
b-0
.015
FH
PartNumber
Type: E08Standard: DIN1530-FH / ISO8693Material: 1.2067 Hardened SteelHardness:
Head = HRC45+/-5Shaft = HRC60+/-2 Through Hardened
d 2
d 1L1
L2
K
ax
b
a -0.015
b-0
.015
FH
PartNumber
MATERIAL: WAS 1.2210 Through Hardened Steel
STANDARD: DIN 1530 FH/ISO 8693
HARDNESS:Throughout Hardened to HRC60 +_ 2
Stock Also available
www.halesmastip.co.uk
Conical Head Pins (DH)E
ject
ors
10
h Hardened
d 1
L
Rz 2,5
d 2
k
60°
PartNumber
DH
Type: E11Standard: DIN1530-D
Material: 1.2067 Hardened Steel
Hardness:
Head = HRC45+/-5
Shaft = HRC60+/-2 Through Hardened
d1
L
Rz 2,5
d2
k
60
°
PartNumber
PartNumber
DH DH
MATERIAL: WAS 1.2210 Through Hardened Steel
STANDARD: DIN 1530-D
HARDNESS:Shaft: HRC60 +_ 2Head: HRC45 +_ 5
Stock Also available
www.halesmastip.co.uk
Custom Straight Ejector & Core PinsE
jecto
rs
11
D
T
H
Note: Photocopy form, fill out and then fax to Hales
Material
Hardness
Material
Hardness
Dimension
D
Tolerance
+_
L+_
H+_
T+_
Quantity
Pin #1
Dimension
D
Tolerance
+_
L+_
H+_
T+_
Quantity
Pin #2
Contact: ..............................................................................................................................................................................................................................................................................................................................................................................
Reference No.:....................................................................................................................................................................................................................................................................................................................................................
Company Name: ........................................................................................................................................................................................................................................................................................................................................
Account No.: ....................................................................................................................................................................................
Phone: ...................................................................................................................................................................................... Fax:........................................................................................................................................................................
www.halesmastip.co.uk
Custom Stepped PinsE
ject
ors
12
L
S
T
DR
B
H
B1
Note: Photocopy form, fill out and then fax to Hales
Material
Hardness
Dimension
B
Tolerance
+_
L+_
H+_
T+_
Pin #1
D+_
S+_
BI+_
R+_
Quantity
Contact: ..............................................................................................................................................................................................................................................................................................................................................................................
Reference No.:....................................................................................................................................................................................................................................................................................................................................................
Company Name: ........................................................................................................................................................................................................................................................................................................................................
Account No.: ....................................................................................................................................................................................
Phone: ...................................................................................................................................................................................... Fax:........................................................................................................................................................................
www.halesmastip.co.uk
Custom Ejector SleevesE
jecto
rs
13
Note: Photocopy form, fill out and then fax to Hales
Material
Hardness
Nitride
Dimension
D
Tolerance
+_
B+_
G+_
N+_
Pin #1
L+_
H+_
T+_
Quantity
Contact: ..............................................................................................................................................................................................................................................................................................................................................................................
Reference No.:....................................................................................................................................................................................................................................................................................................................................................
Company Name: ........................................................................................................................................................................................................................................................................................................................................
Account No.: ....................................................................................................................................................................................
Phone: ...................................................................................................................................................................................... Fax:........................................................................................................................................................................
ID OD
www.halesmastip.co.uk
Euro Standard Mould Bases 1515M
ou
lds
14
1515-3406 36 46 66 75
1515-4506 46 56 66 85
1515-5606 56 66 66 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 1919M
ou
lds
15
1919-3406 36 46 66 75
1919-4506 46 56 66 85
1919-5606 56 66 66 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 1929M
ou
lds
16
1929-3406 36 46 66 75
1929-4506 46 56 66 85
1929-5606 56 66 66 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 2424M
ou
lds
17
2424-3406 36 46 66 75
2424-4506 46 56 66 85
2424-5606 56 66 66 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 2434M
ou
lds
18
2434-3406 36 46 66 75
2434-4507 46 56 76 85
2434-5607 56 66 76 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 2929M
ou
lds
19
2929-4506 46 56 66 85
2929-5606 56 66 66 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 2939M
ou
lds
20
2939-3406 36 46 66 75
2939-4507 46 56 76 85
2939-5607 56 66 76 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Euro Standard Mould Bases 3434M
ou
lds
21
3434-3406 36 46 66 75
3434-4507 46 56 76 85
3434-5607 56 66 76 95
Code A B C L
Key Features: P20 A & B PlatesEuro Standard Design
Price Includes: PillarsBushesLinersScrewsEyebolt HolesNext Day Delivery*
* UK only dependent on stock
www.halesmastip.co.uk
Special MachiningM
ou
lds
22
Where extremely high precision is required, Strack is thespecialist for special machining.
We offer you Strack standard parts on request inpreworked and finished forms. These include, for example,milled pockets, slide guides, machined recesses, deep-drilled holes and jig grinding.
Especially in the case of complex plate machiningoperations, it is recommendable to carry out roughmachining or preworking of the milled pockets and slidesand also the machined recesses before the guide boresare made. In this way it is possible to compensate forstresses released by the complex machining before thebores for the guide system are made.
Consequently, cavities and the guide system can bemade to match one another with extreme accuracy. Onlyin this way can the highest precision of the mould beachieved.
To be able to carry out especially difficult machiningoperations, we use powerful CNC machining centres, jigboring machines, milling and grinding machines and jiggrinding machines. Important prerequisites for precisionand quality.
The efficient performance of the working and finishingoperations on our high-performance installations createnew capacities for your plant. The outsourcing meansmore productivity for you, lower investments and greatercertainty. Special machining operations are standard forus. All we need for special machining is a correspondingdrawing, which you can send us by email or on a datacarrier. And the special service provided by Strack is thatall documents submitted are checked meticulously toensure they conform to one another before productionproceeds.
14/15 27 30 20 25 6 9 7456585
105125145165
36 35557595
125155
46 35456585
105125145
56 35557595
13566 55
6595
12576 55
9586 55
9596 55
95116 75
9/10 12 25 14 16 3 3 44565
17 20305070
22 2535557595
27 2030507090
36 25456585
46 304570
56 3560
66 4514/15 17 35 20 25 6 9 7
557595
22 30507090
110125150
d1 L1 L2 d2 d3 K L3 L4d1 L1 L2 d2 d3 K L3 L4
±
www.halesmastip.co.uk
Guide Pillars - W20A
lign
me
nt
23
22/24 17 35 30 35 6 9 75575
22 355575
105130
27 35456585
105125165205245285
36 35557595
115135165205245285
46 35456585
105125165205
56 35557595
115165205
66 35557595
15576 55
7595
115145
86 557595
13596 55
75
18/20 17 35 26 31 6 9 75575
12022 35
456585
11527 35
456585
105125165225245
36 35557595
115135165225255
46 35 456585
105135165245
56 35557595
15566 35
557595
14576 55
7595
13586 55
7595
12596 55
95116 75
115136 135
d1 L1 L2 d2 d3 K L3 L4 d1 L1 L2 d2 d3 K L3 L4
www.halesmastip.co.uk
Guide Pillars - W20A
lign
me
nt
24
30/32 66 55 42 47 6 9 77595
115135175245295
76 557595
115155225
86 557595
115155225
96 557595
115155205
116 75115155
136 95115155
156 115155
196 155195
40/42 46 95 54 60 10 12 7165
22/24 96 95 30 35 6 9 7125
116 75115155
136 95135
156 15530/32 27 45 42 47 6 9 7
65105165185245285
36 557595
115155245285
46 456585
105125165245285
56 557595
115135175245295
d1 L1 L2 d2 d3 K L3 L4 d1 L1 L2 d2 d3 K L3 L4
±
www.halesmastip.co.uk
Guide Pillars - W20A
lign
me
nt
25
d1 L1 L2 d2 d3 K L3 L4d1 L1 L2 d2 d3 K L3 L4
40/42 56 75 54 60 10 12 7115155195
66 75135
76 75115175
86 75135
96 75115155
40/42 116 95 54 60 10 12 7135195
136 95135215
156 115155215
196 155195235
246 165245
www.halesmastip.co.uk
Guide Pillars - W20A
lign
me
nt
26
d1 L1 L2 d2 d3 K L4d1 L1 L2 d2 d3 K L4
14/15 46 35 20 25 6 7456585
10556 20
35557595
66 556595
76 5595
86 5595
18/20 22 20 26 31 6 7 35404550556065708085
11527 20
3540455055606570
9/10 17 20 14 16 3 430
22 253555
27 3050
36 2545
46 3045
14/15 22 20 20 25 6 7 3540455055657090
11027 20
354045556585
10536 20
35404555657595
46 20
±
www.halesmastip.co.uk
Guide Pillars - W21A
lign
me
nt
27
22/24 36 75 30 35 6 78095
115135165
46 2545506065708085
105125165
56 2545557595
115165
66 557595
76 2545557595
11586 55
7595
96 557595
116 75115155
136 13530/32 27 45 42 47 6 7
65105165
36 557595
115155
46 456585
105125165
56 55
d1 L1 L2 d2 d3 K L4
18/20 27 80 26 31 6 785
105125
36 203540455055606570758095
115135
46 20456585
105135165
56 2035557595
66 557595
76 557595
86 557595
96 5595
116 11522/24 27 25 30 35 6 7
45506065708085
105125165
36 254550556070
d1 L1 L2 d2 d3 K L4
www.halesmastip.co.uk
Guide Pillars - W21A
lign
me
nt
28
d1 L1 L2 d2 d3 K L4d1 L1 L2 d2 d3 K L4
40/42 56 75 54 60 10 7115155195
66 75135
76 75115175
86 75135
96 75115155
116 95135195
136 95135215
156 115155215
196 155195235
50 96 115 66 72 10 10116 135136 135156 155196 175
60 96 115 80 86 20 10116 135136 135156 155196 175246 195
30/32 56 75 42 47 6 795
115135155175
66 557595
115135175
76 557595
115155
86 557595
115155
96 557595
115155
116 75115155
136 95115155
156 115155
196 155195
±
www.halesmastip.co.uk
Guide Pillars - W21A
lign
me
nt
29
d1 L1 L2 d2 d3 K L3d1 L1 L2 d2 d3 L3
K±0,05
d1H
7
L3
d2e7
L2
d2k6
R 2,5z
A
d3-0
,2
d1+0
,5+0
,2
d2e7
L1 -0,5-1
ø0,01 A
ø0,01 A
22/24 36 45 30 35 6 946 5556 6566 7576 8586 9596 105
116 96136156
30/32 27 36 42 47 6 936 4546 5556 6566 7576 8586 9596 105
116 125136 116156196
40/42 46 58 54 60 10 1256 6866 7876 8886 9896 108
116 128136 136156196246
9/10 12 15 14 16 3 317 2022 2527 3036 3946 465666
14/15 17 26 20 25 6 922 3127 3636 4546 5556 5666768696
11618/20 17 26 26 31 6 9
22 3127 3636 4546 5556 6566 7576 768696
116136
22/24 17 26 30 35 6 922 3127 36
K
www.halesmastip.co.uk
Guide Bushes - W31A
lign
me
nt
30
d1 L1 L2 d2 d3 Kd1 L1 L2 d2 d3 K
K±0,05
d1H
7
L2
d2k6
R 2,5z
d2e7
A
ø0,01 A
d1+0
,5+0
,2
d3-0
,2
L1 -0,5-1
18/20 76 76 26 31 68696
11622/24 17 17 30 35 6
22 2227 2736 3646 4656 5666 6676 7686 8696 96
116136
30/32 27 27 42 47 636 3646 4656 5666 6676 7686 8696 96
116 116136156
40/42 46 46 54 60 1056 5666 6676 7686 8696 96
116 116136 136156196246
9/10 9 9 14 16 312 1217 1722 2227 2736 3646 465666
12 17 17 18 23 622 2227 2736 3646 4656 56
14/15 12 12 20 25 617 1722 2227 2736 3646 4656 5666768696
16 17 17 22 27 622 2227 2736 3646 4656 56
18/20 17 17 26 31 622 2227 2736 3646 4656 5666 66
www.halesmastip.co.uk
Guide Bushes - W32A
lign
me
nt
31
d2 d1 L d3 L1 L2d2 L d1 d3 L1 L2
30 80 25 M12 13 2,5100120140160180200240
42 40 33 M12 13 4,56080
100120140160180200220260300
54 60 43 M12 13 4,580
120160200240280
14 20 11 M8 8 2304050607080
10020 30 16 M12 13 2
406080
100120140160
26 30 21 M12 13 2,5406080
100120140160180
30 40 25 M12 13 2,560
Rz 4
L1
L±0,5
d1+0
,5
d2g6
L2
d2k6
d3
www.halesmastip.co.uk
Centering Sleeves - W30A
lign
me
nt
32
www.halesmastip.co.uk
Taper LocksA
lign
me
nt
33
Code D k6 T T1 . T2 MXL A V L1 L2
Material SUJ2
HRC 55-60
T-0.2+0.4
1 1
D K6
3
L2
T2
3 Max.
-0+0.2
C1D
-0.1-0.3
M
D K6
3
T1
1
V
A˚
L2
R0.5
-0.1+0.2
-0.03-0.01
C1
-0.2+0
TLP-16 16+0.012
30 14 M5X10 10 5 6+0.001
TLP-20 20+0.015
40 19 M6X12 13 8 9+0.002
TLP-2525 +0.015
50 24 M8X16 5o 16 11 12+0.002
TLP-3030 +0.015
60 29 M10X20 20 14 15+0.002
TLP-3232 +0.018
60 29 M10X20 20 14 15+0.002
Hales Tapered Interlocks offer an easy solution to ensuring the alignment of die plates.Tapered interlocks are made and sold in pairs.
www.halesmastip.co.uk
Taper InterlocksA
lign
me
nt
34
www.halesmastip.co.uk
Side LocksA
lign
me
nt
35
GPL38 38 22 30 12 22 10.5 6.5 7 7 22 13 5 8
GPL50 50 21.5 30 17 21.5 10.5 6.5 11 11 34 16 5 8
GPL75 75 36 50 25 36 16.5 10.5 18 18 50 19 8 12
GPL100 100 45 65 35 45 16.5 10.5 22 22 70 19 10 12
GPL125 125 45 65 45 45 16.5 10.5 22 22 84 25 10 12
Part No A B C D E F f G J K L M N
GPL1.5 1.500 0.870 1.180 0.500 0.87 0.433 0.276 0.281 0.437 0.938 0.620 0.190 0.3
GPL2.0 2.000 0.870 1.180 0.680 0.87 0.433 0.276 0.375 0.437 1.250 0.620 0.190 0.3
GPL3.0 3.000 1.360 1.910 1.000 1.37 0.590 0.413 0.688 0.688 2.250 0.745 0.380 0.45
GPL4.0 4.000 1.870 2.640 1.375 1.87 0.590 0.413 0.875 0.875 2.750 0.745 0.500 0.45
GPL5.0 5.000 1.870 2.640 1.750 1.87 0.788 0.555 0.875 0.875 3.500 1.120 0.500 0.6
Part No A B C D E F f G J K L M N
D
C
L
N
L
E
G
D
A -0.010
+0.0050
-0.0050
B
K
M
M
J
fF
www.halesmastip.co.uk
Coated Side LockA
lign
me
nt
36
CSL37 1.0000 0.375 1.125 0.875 0.53 0.5000 0.4999 1.37 0.22 3/16 0.06 0.250 0.500 #10-32X1/2”
CSL49 1.2500 0.490 1.125 0.875 0.66 0.5000 0.4999 1.50 0.22 3/16 0.06 0.250 0.750 #8-32X5/8”
CSL50C 1.5000 0.500 0.875 0.875 0.56 0.5630 0.5629 1.40 0.22 3/16 0.06 0.250 1.000 #8-32X5/8”
CSL50 2.0000 0.500 1.375 0.875 0.66 0.7500 0.7499 1.50 0.28 3/16 0.06 0.312 1.376 #10-32X5/8”
CSL75 3.0000 0.750 1.875 0.750 1.13 1.2500 1.2499 1.96 0.53 1/4 0.12 0.375 2.250 1/4-20X3/4”
CSL100 4.0000 1.000 2.375 1.375 1.25 1.5000 1.4999 2.59 0.53 1/2 0.12 0.500 3.000 3/8-16X1”
CSL125 5.0000 1.250 2.875 1.375 1.63 2.0000 1.9999 2.96 0.53 1/2 0.12 0.625 3.750 1/2-13X1 1/4”
CSL150 6.0000 1.500 2.875 1.375 1.75 2.5000 2.4999 3.09 0.53 1/2 0.12 0.625 4.750 1/2-13X1/2”
Type No. W T A B C D1 D2 H R1 Pocket R2 S S1 SHCS0 +- .001 +- .001 +- .001 +.0003 0 Radius +- .010 +- .010
-.0005 0 -.0003
CSLM50 16 50 21.5 21.5 12 17 43 5 8 11 M6-1.0x18
CSLM75 19 75 36 36 17 25 72 5 12.5 18 M10-1.5x20
CSLM100 19 100 45 45 23 35 90 5 15 22 M10-1.5x20
CSLM125 25 125 45 45 23 35 90 5 20.5 22 M10-1.5x25
Catalogue T W A B C D H R S1 S2 SHCSNumber +.00 +.00 +.00 +.00 .002/.005 +0.0 Pocket +- .25 +- .25
-.05 -.01 -.05 -.05 Clearance -0.1 RadiusPer Side
Metric Standard
www.halesmastip.co.uk
Slide Holding DevicesM
ou
ldA
ccesso
ries
37
Type
18-0,01-0,03
R0,590°
14-0
,05
-0,1
2
P2=1
26N
P1=1
14N
R8
43
530 -0
,05
1,8
M5
Ø4,
2
SN3500-4-16
Ø8
4,5
32-0
,2
SN2500-8-16,5
012
max. 100� C
SN3500-4-16
SN2500-6-15
P2=
70N
P1=
62N
14-0,01-0,03
R0,590°
12-0
,05
-0,1
21,
828
380 -0
,05
R6
16-0
,20
M5
Ø4,
2 4,5
Ø8
SN3500-4-20
SN2500-8-16,5
P2=
252N
P1=
228N
48-0,01-0,03
M5Ø 4,2
36
650
50,0-
44
R8
R0,5
16-0
,05
-0,1
4,5
1,8 90°
02, 0-
4 4
max. 100� C
max. 100� C
www.halesmastip.co.uk
Slide Holding DevicesM
ou
ldA
cce
sso
rie
s
38
Mat.-Nr. 1.2842/58 +2HRC
13 6,6 1,4 4,3 10 1,0 1,6 0,35 7 2,2 M3 0,35 28 34 5-12 M2-1618 9,6 2,0 6,0 14 1,8 2,0 0,50 10 3,2 M4 0,5 38 42 8-16,5 M3-2027 14,4 3,0 9,0 21 2,8 3,0 0,50 15 4,3 M5 0,75 38 92 11,6-18,5 M4-25
Z 5130
www.halesmastip.co.uk
Slide Holding DevicesM
ou
ldA
ccesso
ries
39
D2 g6
t2t3
t1-0
,05
-0,0
5
R
D1
B1 ±0,05
t4±0
,05
Ln
L0
P2
D3
D2
-0,0
5
SN 2500
max. 100° C
Z 5134
t3
t1-0
,05
-0,0
5
D1
t4±0
,05
Ln
L0
P2
D3
D2
-0,0
5
D2 B1 t1 t2 t3 t4 D1 D3 R L0 Ln P2(N) SN 2500-7 6,6 7 1,0 1,4 6,3 8,4 5,3 0,35 12 7,5 34 5-1210 9,6 10 1,8 2,0 9,0 12,0 8,3 0,50 16 10,0 42 8-16,515 14,4 15 2,8 3,0 13,5 18,0 12,4 0,75 18 16,0 92 11,6-18,5
Mat.-Nr. 1.2842/58 +2HRC
S
www.halesmastip.co.uk
Slide Holding DevicesM
ou
ldA
cce
sso
rie
s
40
1:
2:
3:
Z 4242
Z 5134
Z 5130
Z 5134
Z 5134
4315Z
0315Z
www.halesmastip.co.uk
Slide Construction KitsM
ou
ldA
ccesso
ries
41
B3
B3
B4
R
R
L3
L4
L5
L6 L7
˘ D
t3
t1
B1
1x45°
71Z 66
25
6
4
B5 B2
L2
L1
8
10
3
9
www.halesmastip.co.uk
Slide UnitsM
ou
ldA
cce
sso
rie
s
42
20°
Z 3158-6 (Type 1 = 2x)Z 3158-8 (Type 2 = 2x)
A
a1
-0,0
05-0
,010
A
a1
-0,005-0,010
R8
S
0,5
h1h2
H
-0,0
5-0
,05
t2+0
,1
t1
M6
A
a1
-0,0
05-0
,010
A
a1
-0,005-0,010
L1
L2
25
M
B
M6
t3
R8
L
+0,0
2-0
,01
A/2
Type A B a1 S L L1 L2 H h1 h2 t1 t2 t3 M
1 40 20 26 4,9 59,8 10 20 52 14,5 37 25 6 12 M 42 60 35 46 9,9 74,8 6 18 72 14,5 57 40 10 17 M 5
Longer slidesIndicate dimension L in the order,for example:Z 4295-2-80Delivery without M and t2!
www.halesmastip.co.uk
Sprung CoreM
ou
ldA
ccesso
ries
43
Cad Insertion Point
6.3
4
6.3
6.3
6.3
6.3
K
B
C
L
0.5
15xøG
øA
0.5
90º
T
E
D6º
CS
Hard. 58 ± 2 HRC.
FP
W
+2
+0.1
+0.1g6
±0.2
±1
Mat. Bronze
øA
øU
øA
0.5
R
V
0.1
Min. 2ºMin. C
+0.5
+0.2
+0.1
TAPage 3.03
+0.1
Max. C
Min. 1
Max
.M
Max
.N
IMPO
RTAN
T
Minimum space required forinstallation, only needs the space ofan ejector. No milling, grinding orhardening other than the machiningof detail needed. All machining ismade 90° to the parting line. Noneed for complex mechanicalsystems.
Mat.:1.8159Hardened 45 ± 3 HRC.Patented System
PW.060622 6 6.2 22 9 3.5 - 3.5 125 16 18 1.25 M4x36 12 5 M4x16 (DIN7991) -
PW.060630 6 6.2 30 10 3.5 12 4.5 175 20 26 1.25 M4x36 12 5 M4x16 (DIN7991) •
PW.060822 6 8.2 22 9 3.5 - 3.5 125 16 18 1.25 M4x36 12 5 M4x16 (DIN7991) -
PW.060830 6 8.2 30 10 3.5 12 4.5 175 20 26 1.25 M4x36 12 5 M4x16 (DIN7991) •
PW.080825 8 8.2 25 11.5 4.5 - 4.5 140 18 21 2 M5x36 14 6 M5x16 (DIN7984) -
PW.081025 8 10.2 25 11.5 4.5 - 4.5 140 18 21 2 M5x36 14 6 M5x16 (DIN7984) -
PW.081030 8 10.2 30 11.2 4.5 12 4.5 175 20 26 2 M5x36 14 6 M5x16 (DIN7984) •
PW.081225 8 12.2 25 11.5 4.5 - 4.5 140 18 21 2 M5x36 14 6 M5x16 (DIN7984) -
PW.081230 8 12.2 30 11.2 4.5 12 4.5 175 20 26 2 M5x36 14 6 M5x16 (DIN7984) •
PW.101430 10 14.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 (DIN7984) •
PW.101630 10 16.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 (DIN7984) •
PW.101830 10 18.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 (DIN7984) •
Ref A B C D E G K L M N R T U V W CS
Cad Insertion Point
6.3
4
6.3
6.3
6.3
6.3
K
B
C
L
0.5
15xøG
øA
0.5
90º
T
E
D6º
CS
Hard. 58 ± 2 HRC.
FP
W
+2
+0.1
+0.1g6
±0.2
±1
Mat. Bronze
øA
øU
øA
0.5
R
V
0.1
Min. 2ºMin. C
+0.5
+0.2
+0.1
TAPage 3.03
+0.1
Max. C
Min. 1
Max
.M
Max
.N
IMPO
RTAN
T
www.halesmastip.co.uk
Flexible CoreM
ou
ldA
cce
sso
rie
s
44
Max
.12
Max
.16
Min. 1
Hard.
6.3
6.3
6.3
2.5
30
6.3
200±2
8 -0.05
A-0.02
TAPage 3.03
øH+0.5
Min. 36
IMPORTANTR 0.1
0.1
5º
4 H7 AH7x
Cad Insertion Point
Max
.12
Max
.16
Min. 1
IMPO
RTAN
T
Hard.
6.3
6.3
6.3
2.54
30
6.3
200±2
øB 8
R 0.15
-0.05-0.2
A-0.02
IMPORTANTR 0.1
0.1
5º
4 H7 AH7x
Cad Insertion Point
Max
.12
Max
.16
Min. 1
IMPO
RTAN
T
Hard.
6.3
6.3
6.3
2.54
30
6.3
200±2
øB 8
R 0.15
-0.05-0.2
A-0.02
TPage
øH+
M
IMPORTANTR 0.1
0.1
5º
4 H7 AH7x
Ref A B H Balinit C® Hard
PF.064200 6 12 7 • 52 ± 2 HRC.
PF.0642WB 6 12 7 - 58 ± 2 HRC.
PF.084200 8 14 9 • 52 ± 2 HRC.
PF.0842WB 8 14 9 - 58 ± 2 HRC.
PF.104200 10 16 11 • 52 ± 2 HRC.
PF.1042WB 10 16 11 - 58 ± 2 HRC.
PF.124200 12 18 13 • 52 ± 2 HRC.
PF.1242WB 12 18 13 - 58 ± 2 HRC.
Minimum space required for installation, only needs thespace of an ejector. No milling, grinding or hardeningother than the machining of detail needed. All drilling is90° to the parting line. Available with and without BalinitC® coating.
Mat.: 1.2101Hardened 45 ± 3 HRC.Patented System
Mat.1.2379 - 60+2HRC
Rz 6.3
C
36
Rz 6.3
Rz 6.3
Rz 6.3
D
E
52 -0.05
Rz 6.3
Rz 6.3
A g6R<0.15
B g6
0F x M0.75
85
L +2
10
0G 0.2
PoscionarTo Position
CortarTo shorten
M6x25DIN912
EV
15o
www.halesmastip.co.uk
Vertical Lifter BlockM
ou
ldA
ccesso
ries
45
Ref A B C D E
PV.341252 34 12 28 15.5 27
PV.361652 36 16 30 16.5 29
PV.382052 38 20 32 17.5 31
PV.402452 40 24 34 18.5 33
Ref F G L
EV.006… 6 12 150 225
EV.008… 8 14 150 225
EV.010… 10 16 150 225
EV.012… 12 18 150 225
0F+1
Max. 26
<7Remove profile block
Remove the safetystoppers "TM"
Push the ejector plates forward
1
2
3
Mat. 1.2344 – Hardened 52-54 HCR. Patented System
Vertical Lifter BlockThe Main characteristics of this item are its perpendicularmovement with respect to the ejector plates and the easeof adjustmentImportant.
The EV reference must be ordered separately
Indicate the desired L dimension after the reference.
www.halesmastip.co.uk
Plate AcceleratorM
ou
ldA
cce
sso
rie
s
46
EP.200813 20 8 13.2 25.8 9.4 11.4 6 13.6 5.5 5 15 Ø2.5x10 M3x12 75 kg.
EP.251016 25 10 16 32.3 11.8 14.3 7 17 6.8 6 18.5 Ø3x12 M4x16 125 Kg.
EP.371522 37.5 15 22 48.5 17.7 21.5 10.5 25.5 10.2 8 25 Ø4x16 M6x25 250Kg.
EP.502030 50 20 30 64.6 23.6 28.6 14 34 13.6 10 34 Ø5x20 M8x30 500Kg.
Ref. A B C D E F G H max. L max. M N P T Max. Force
Hard. 58 ± 2 HRC.
Mat. 1.0503
øB
E
F G
M
D
A
L max.
H max.
PDIN 6325
TDIN 912
C Max. N±0.2
6.3
6.3
6.3
4
Hard. 58 ± 2 HRC.
Mat. 1.0503
øB
E
F G
M
D
A
L max.
H max.
PDIN 6325
TDIN 912
C Max. N±0.2
6.3
6.3
6.3
4
Simple mechanical double ejection system. Minimum space required forinstallation. Avoids complex systems like others currently available in themarket. Offers a standard solution to the molder.
www.halesmastip.co.uk
Slide RetainerM
ou
ldA
ccesso
ries
47
21 21
Less machining for installation compared to similar products on themarket. Minimum space required for installation. Reduces costs intool downtime. Offers a standard solution to the molder.
Mat.: 1.8159Hardened 45 ± 3 HRC. Patented System
RC.123006 12 30 6x20 21 5 4 16 5 Kg. 6 M5x16
RC.164008 16 40 8x20 28 6 5 15 7 Kg. 8 M6x25
RC.205010 20 50 10x24 34 8 6 17 14 Kg. 10 M8x30
RC.246012 24 60 12x32 42 10 7 23 21 Kg. 12 M10x40
RC.328012 32 80 16x40 56 12 9 27 28 Kg. 16 M12x50
RC.328016 32 80 16x40 56 16 9 25 38 Kg. 16 M12x50
Ref. A B C E F G H K R T
Optional Dowel Pin
21 21Ref. L M N P
PO.120320 12 M3x20 7.5 6
PO.150425 15 M4x25 10 8
PO.200530 20 M5x30 13 10
PO.250635 25 M6x35 16 12
PO.340850 34 M8x50 23 16
Mat.: 1.3505Hardened 60 ± 2 HRC.
www.halesmastip.co.uk
Modular RetainerM
ou
ldA
cce
sso
rie
s
48
No pocket machining required as needed with other similarproducts on the market. Minimum space required for installation.Reduces costs compared to conventional mechanisms. Offers astandard solution to the molder.
Mat.: 1.8159Hardened 45 ± 3 HRC. Patented System
Ref. K
RM.651608 7.5 Kg.
www.halesmastip.co.uk
Ejector CouplersM
ou
ldA
ccesso
ries
49
L
M
K
D
E
C F G H I J
COUPLER
302M12COUP 12X1.75 34 32 32 39 43 9 15 42.5
402M16COUP 16X1.5 40 38 38 48 53 13 15 52
402M162COUP 16X2 40 38 38 48 53 13 15 52
402M20COUP 20X1.5 40 38 38 48 53 13 15 52
412M16COUP 16X1.5 58 56 52 65 70 17 18 68
Code Thread F G H I J K L M
BARBS
301M12Barb 12x1.75 22.8 20 45.5
401M16Barb 16x2 25.8 20 55
401M20Barb 20x2.5 25.8 20 55
411M16Barb 16x2 35 35 68
Code Thread C D E
Mould Closed-Material Injected Mould Open-Coupler Engages and Pushes Forward Coupler and Bars Pull Back the Ejector Plate
www.halesmastip.co.uk
Cooling ProductsC
oo
ling
Pro
du
cts
50
Hales offer the complete range of fittings, couplings, hoses and accessoriesfor the 3 main standards.
European (Hasco Equiv.) International (DME Equiv.) French (Staubli Equiv.)
For a complete catalogue for fittings, couplings and hoses, please call us ordownload it from our website.
www.halesmastip.co.uk
Cooling ProductsC
oo
ling
Pro
du
cts
51
D L L1 SW VPE/8 9,5 100 9 11 10/8 9,5 150 9 11 10/8 9,5 250 9 11 10/4 13,5 150 12 15 10/4 13,5 250 12 15 10
A D L L1 SW VPEN70M10 M10x1 9,5 23 8 13 25TN701/8 R1/8 9,5 24 9 13 25TN701/4 R1/4 9,5 29 12 16 25
R1/4 9,5 29 14 16 25TN703/8 R3/8 9,5 30 12 19 25TN951/4 R1/4 13,5 34 12 16 25TN953/8 R3/8 13,5 34 12 19 25TN951/2 R1/2 13,5 39 17 24 25TN501/2 R1/2 20 44 17 22 10TN503/4 R3/4 20 45 19 29 10
S SERIES A D L L1 SW VPE70 TN7010/100 R1/8 9,5 100 9 11 10
TN7010/150 R1/8 9,5 150 9 11 10TN7010/250 R1/8 9,5 250 9 11 10
95 TN9514/150 R1/4 13,5 150 12 15 10TN9514/250 R1/4 13,5 250 12 15 10
TN7010/100
S SERIES A D L L1 SW VPE70 TN70M10 M10x1 9,5 23 8 13 25
TN701/8 R1/8 9,5 24 9 13 25TN701/4 R1/4 9,5 29 12 16 25
TN701/4 V R1/4 9,5 29 14 16 25TN703/8 R3/8 9,5 30 12 19 25
95 TN951/4 V TN951/4 R1/4 13,5 34 12 16 25TN953/8 V TN953/8 R3/8 13,5 34 12 19 25
TN951/2 R1/2 13,5 39 17 24 2550 TN501/2 R1/2 20 44 17 22 10
TN503/4 R3/4 20 45 19 29 10
TN701/4
TN..
A D L L1 SW VPER1/8 9,5 100 9 11 10R1/8 9,5 150 9 11 10R1/8 9,5 250 9 11 10R1/4 13,5 150 12 15 10R1/4 13,5 250 12 15 10
TN953/8 R3/8 13,5 34 12 19 25TN951/2 R1/2 13,5 39 17 24 25TN501/2 R1/2 20 44 17 22 10TN503/4 R3/4 20 45 19 29 10
S SERIES A D L L1 SW VPE70 TN7010/100 R1/8 9,5 100 9 11 10
TN7010/150 R1/8 9,5 150 9 11 10TN7010/250 R1/8 9,5 250 9 11 10
95 TN9514/150 R1/4 13,5 150 12 15 10TN9514/250 R1/4 13,5 250 12 15 10
TN7010/100
TN../..
TNI701/4
S SERIES A D L L1 SW VPE65 TNI701/8 G1/8 9,5 28 11 13 25
TNI701/4 G1/4 9,5 32 13 16 25TNI703/8 G3/8 9,5 34 13 19 25
90 TNI951/4 G1/4 13,5 37 13 16 25TNI953/8 G3/8 13,5 39 13 19 25
TNI701/4
S SERIES A D L L1 SW VPE65 TNI701/8 G1/8 9,5 28 11 13 25
TNI701/4 G1/4 9,5 32 13 16 25TNI703/8 G3/8 9,5 34 13 19 25
90 TNI951/4 G1/4 13,5 37 13 16 25TNI953/8 G3/8 13,5 39 13 19 25
TNI . .
TNI...
TN701/4
TN7010/100
TNI701/4
www.halesmastip.co.uk
Cooling ProductsC
oo
ling
Pro
du
cts
52
S SERIES A D L L1 SW VPE65 TL6510 TL6510OV 10 18 52 22 1090 TL9013 TL9013OV 13 23 61,5 25 1020 TL2019 TL2019OV 19 32 90 32 5
TL9013
S SERIES A D L L1 SW VPE65 TV6510/90 TV6510/90OV 10 18 41 22 1090 TV9013/90 TV9013/90OV 13 23 51 28,5 1020 TV2019/90 TV2019/90OV 19 32 78 32 5
1L
TV9013/90
TV. . /90
TL. .S SERIES A D L L1 SW VPE
65 TL6510 TL6510OV 10 18 52 22 1090 TL9013 TL9013OV 13 23 61,5 25 1020 TL2019 TL2019OV 19 32 90 32 5
TL9013
S SERIES A D L L1 SW VPE65 TV6510/90 TV6510/90OV 10 18 41 22 1090 TV9013/90 TV9013/90OV 13 23 51 28,5 1020 TV2019/90 TV2019/90OV 19 32 78 32 5
1L
TV9013/90
TV. . /90
TL. .
TL..
S SERIES A D L L1 SW VPE65 TL6510 TL6510OV 10 18 52 22 1090 TL9013 TL9013OV 13 23 61,5 25 1020 TL2019 TL2019OV 19 32 90 32 5
TL9013
S SERIES A D L L1 SW VPE65 TV6510/90 TV6510/90OV 10 18 41 22 1090 TV9013/90 TV9013/90OV 13 23 51 28,5 1020 TV2019/90 TV2019/90OV 19 32 78 32 5
1L
TV9013/90
TV. . /90
TL. .
65 TL6510 TL6510OV 10 18 52 22 1090 TL9013 TL9013OV 13 23 61,5 25 1020 TL2019 TL2019OV 19 32 90 32 5
S SERIES A D L L1 SW VPE65 TV6510/90 TV6510/90OV 10 18 41 22 1090 TV9013/90 TV9013/90OV 13 23 51 28,5 1020 TV2019/90 TV2019/90OV 19 32 78 32 5
1L
TV9013/90
TV. . /90
TV../90
TL9013
TV9013/90
S SERIES A65 TV6510/45 TV6510/45OV 1090 TV9013/45 TV9013/45OV 1320 TV2019/45 TV2019/45OV 19
S SERIES A D L L1 SW VPE65 TV6510/45 TV6510/45OV 10 18 52 22 1090 TV9013/45 TV9013/45OV 13 23 51 25 1020 TV2019/45 TV2019/45OV 19 32 78 30 5
TV9013/45
TV../45
TV9013/45
www.halesmastip.co.uk
Cooling Circuit PlugsC
oo
ling
Pro
du
cts
53
Features: Based on the water flow directions, any of the cooling and heating systems will have the fitting function in the plastic moulds.How to use it: 1. |When installing into moulds, please make sure the space is at least 0.1mm wider than cooling circuit plugs.2. If there is no specific setting for the cooling plugs: first release, then using the air spray to reset.
Theory: According to Sloping Principle, the O-Ring and springs will enlarge to fit the cooling circuit plugs.
Pressure capacity:Using:8mm cooling circuit plugs for over 16kg/cm2
10mm cooling circuit plugs for over 17kg/cm2
12mm cooling circuit plugs for over 19kg/cm2
Specialty:1. No tapping, no rust2. Can be adjusted for tightness3. Can be placed at any water path and moved accordingly.4. Can be cooling down or heating up by water or oil.5. Under normal operating temperatures: -5~+135oC6. Special operating temperature: -10~+280oC
6 10
8 10GCCP
10 11
12 12
Catalogue Number LType D
Rated +140˚C
www.halesmastip.co.uk
Crimped Hose AssembliesC
oo
ling
Pro
du
cts
54
Water Hose assemblies made to your requirements.Super flexible, long life, EPDM Hose rated to 140OC.
No. D1 D L Colour Pressure Ref. TFK Ref. TFB VPE
TFW10B 10/9 17.5 50m Blue max. 15 bar TFK1810 TFB1016 1
TFW10R 10/9 17.5 50m Red max. 15 bar TFK1810 TFB1016 1
TFB13B 13 21 50m Blue max. 15 bar TFK2313 TFB1318 1
TFB13R 13 21 50m Red max. 15 bar TFK2313 TFB1318 1
TFW..Material EPDM
www.halesmastip.co.uk
Heat Transfer RodsC
oo
ling
Pro
du
cts
55
50 HTR2x50 HTR3x50 HTR4x50 HTR5x50 HTR6x50 HTR8x50
55 HTR2x55 HTR3x55 HTR4x55 HTR5x55 HTR6x55
60 HTR2x60 HTR3x60 HTR4x60 HTR5x60 HTR6x60 HTR8x60
65 HTR2x65 HTR3x65 HTR4x65 HTR5x65 HTR6x65
70 HTR2x70 HTR3x70 HTR4x70 HTR5x70 HTR6x70 HTR8x70
75 HTR2x75 HTR3x75 HTR4x75 HTR5x75 HTR6x75 HTR8x75
80 HTR2x80 HTR3x80 HTR4x80 HTR5x80 HTR6x80
85 HTR2x85 HTR3x85 HTR4x85 HTR5x85 HTR6x85 HTR8x85
90 HTR2x90 HTR3x90 HTR4x90 HTR5x90 HTR6x90
95 HTR2x95 HTR3x95 HTR4x95 HTR5x95 HTR6x95 HTR8x95
100 HTR2x100 HTR3x100 HTR4x100 HTR5x100 HTR6x100
105 HTR2x105 HTR3x105 HTR4x105 HTR5x105 HTR6x105 HTR8x105
110 HTR2x110 HTR3x110 HTR4x110 HTR5x110 HTR6x110
115 HTR2x115 HTR3x115 HTR4x115 HTR5x115 HTR6x115 HTR8x115
120 HTR2x120 HTR3x120 HTR4x120 HTR5x120 HTR6x120
125 HTR2x125 HTR3x125 HTR4x125 HTR5x125 HTR6x125 HTR8x125
135 HTR2x135 HTR3x135 HTR4x135 HTR5x135 HTR6x135
145 HTR2x145 HTR3x145 HTR4x145 HTR5x145 HTR6x145 HTR8x145
155 HTR2x155 HTR3x155 HTR4x155 HTR5x155 HTR6x155
165 HTR3x165 HTR4x165 HTR5x155 HTR6x165 HTR8x165
185 HTR3x185 HTR4x185 HTR5x185 HTR6x185 HTR8x185
205 HTR3x205 HTR4x205 HTR5x205 HTR6x205 HTR8x205
Lengthin mm 2mm 3mm 4mm 5mm 6mm 8mm
Water
Moulded part
Thermal pin heat contuctor
Wick
Vapour flowLiquid returnHeat outHeat in
Water
Moulded part
Thermal pin heat contuctor
Heat Transfer Rods are designed to heat or cool cones, slides and inserts. Heat Transfer Rods conducttemperature over 10,000 times faster than copper.
Heat Transfer Rods operate best when 50% of the overall length is cooled using a water flow. +0.1 to +0.2mmshould be up on the rod diameter for the correct fitment. Fitment hole should be drilled.
Diameters and Catalogue Numbers
www.halesmastip.co.uk
Quick Connect Water JumpersC
oo
ling
Pro
du
cts
56
WJ200-6 200 3/8 1 1 1/4 3/8 5/8
WJ300-6 300 3/8 1 7/16 1 9/16 1/2 7/8
WJ300-8 300 1/2 1 7/16 1 9/16 1/2 7/8
Part FHS Hose L C M ANumber Series ID
A
C
L
Hose
ID
M
Twist lock sleeve prevents accidental disconnect
Viton seals
A
CL
Hose
ID
M
Twist lock sleeve prevents accidental disconnect
Viton seals
Hales Water Jumpers offer smooth unrestricted flow pathsand consistent coolant flow rate, eliminating crimped hoses.
www.halesmastip.co.uk
Telescopic Water FittingsC
oo
ling
Pro
du
cts
57
Telescopic adjustment. Integral part of the tool. Reduces time inconnecting the water circuits. Offers a standard solution to themolder.
MA.506518 35 21 26 1/8” 5 6 50 65
MA.650018 35 21 26 1/8” 5 6 65 100
MA.506514 35 21 26 1/4” 6 6 50 65
MA.650014 35 21 26 1/4” 6 6 65 100
MA.608514 39 25 30 1/4” 9 8 60 85
MA.851314 39 25 30 1/4” 9 8 85 130
MA.608538 39 25 30 3/8” 9 8 60 85
MA.851338 39 25 30 3/8” 9 8 85 130
Ref. A B C R S SW L Min. L Max.
Cad Insertion Point
øS
øB
SW
L Max.
L Min.
R
AC
Min. 32
øS
ø21
SW6
L Max.
L Min.
R
3526
Cad Insertion Point
øS
øB
SW
L Max.
L Min.
R
AC
Min. 32
øS
ø21
SW6
L Max.
L Min.
R
3526
Cad Insertion Point
øS
øB
SW
L Max.
L Min.
R
AC
Min. 32
øS
ø21
SW6
L Max.
L Min.
R
3526
MA.101318 1/8” 5 100 130
MA.132018 1/8” 5 130 200
MA.101314 1/4” 6 100 130
MA.132014 1/4” 6 130 200
Ref. R S L Min. L Max.
Mat.: POM + BRASSMax. temp. 80ºC - M ax. pressure 6 BARS.Patented System
www.halesmastip.co.uk
SX NozzleH
ot
Ru
nn
er
58
Overview and ApplicationsWith two heaters the SX nozzle is perfectly suited for all single nozzleapplications. Independently controlled heater zones provide uniformtemperature distribution along the length of the nozzle, making it ideal toprocess difficult plastics.
FeaturesMould Design• Ability to easily order special length nozzles• Shares the same gate profiles as MX and BX• Consistent nozzle lengths across the range• Ability to mould large parts with smaller nozzles due to optimum flow
characteristics
Operation• Seperate heater for the nozzle head for maximum temperature control• Wide moulding window• Excellent temperature profile and thermal stability• Operates at low moulding pressure and temperature• Optimum cycle times due to superior thermal insulation• Uses economical and robust coil heaters
Installation and Maintenance• Simple machining and installation requirements• Improved reliability due to the use of advanced materials• Common tip and nut options provide ready availability of spare parts
13 Series 16 Series 19 Series 27 Series
L 45
55
65
75
95
115
145
175
225
275
L4 18 20 25
L5 44 46 50
d2 40 50
All measurements are in millimetres
Availability
Multi-HoleTorpedo Tip
One-HoleTorpedo Tip
OpenTip
ExtendedTip
OpenNut
BushNut
SprueNut
Gating Options
www.halesmastip.co.uk
MX NozzleH
ot
Ru
nn
er
59
Overview and ApplicationsLow moulding temperature and pressure, excellent temperature consistency and frontloading capabilities, that’s the Mastip MX nozzle, specifically designed for multi cavitymanifold systems and hot halves.The MX nozzle is suited for small to medium applications in all types of markets. It is ableto process a wide range of plastics, from the easy ethylenes to tough engineering resins.
FeaturesMould design• Efficiently designed profile to allow closer cavity pitching• Shares the same gate profiles as BX and SX• Available in both thermal and valve gate options• Consistent nozzle lengths across the range• Ability to mould large parts with smaller nozzles due to optimum flow characteristics
Operation• Wide moulding window• Excellent temperature profile and thermal stability• Operates at low moulding pressure and temperature• Optimum cycle times due to superior thermal insulation• Uses an advanced micro coil heater with integrated heat deflection tube
Installation and maintenance• Front loading capability for easier servicing of tips, heaters and thermocouples• Simple machining and installation requirements• Improved reliability due to the use of advanced materials• Common tip and nut options provide ready availability of spare parts
All measurements are in millimeters
13 Series 16 Series 19 Series
L 45
55
65
75
95
115
145
175
A/F 24 26 36
d2 28 30 40
L4 12 15
Availability
Gating Options
Multi-HoleTorpedo Tip
One-HoleTorpedo Tip
OpenTip
ExtendedTip
OpenNut
BushNut
SprueNut
Valve GateOpen tip
Valve GateTorpedo Tip
www.halesmastip.co.uk
BX NozzleH
ot
Ru
nn
er
60
Overview and ApplicationsBuilding on the performance of X range technology the BX nozzle isdesigned to provide cost sensitive solutions for low to medium cavitationapplications, not requiring hot half construction.Available in 13, 16, 19 and 27 series in a large variety of lengths, makesthis nozzle a very versatile product for a broad array of applications.
FeaturesMould Design• Ability to easily order special length nozzles• Shares the same gate profiles as MX and SX• Available in both thermal and valve gate options• Consistent nozzle lengths across the range• Ability to mould large parts with smaller nozzles due to optimum flow
characteristicsOperation• Wide moulding window•• Excellent temperature profile and thermal stability• Operates at low moulding pressure and temperature• Optimum cycle times due to superior thermal insulation• Uses an economical and robust coil heaterInstallation and Maintenance• Simple machining and installation requirements• Improved reliability due to the use of advanced materials• Common tip and nut options provide ready availability of spare parts
Availability
Gating Options
Multi-HoleTorpedo Tip
OpenTip
ExtendedTip
One-HoleTorpedo Tip
OpenNut
B h
Valve GateTorpedo Tip
Valve GateOpen tip
13 series 16 series 19 series 27 series
L 45
55
65
75
95
115
145
175
225
275
A/F 31 34 36 45
d2 34 38 40 50
L4 12 15 20
All measurements are in millimetres
Availability
Gating Options
Multi-HoleTorpedo Tip
OpenTip
ExtendedTip
One-HoleTorpedo Tip
OpenNut
BushNut
SprueNut
Valve GateTorpedo Tip
Valve GateOpen tip
13 series 16 series 19 series 27 series
L 45
55
65
75
95
115
145
175
225
275
A/F 31 34 36 45
d2 34 38 40 50
L4 12 15 20
All measurements are in millimetres
Availability
Gating Op
Multi-HoleTorpedo Tip
OpenTip
One-HoleTorpedo Tip
OpenNut
BushNut
SprueNut
13 series 16 series 19 series 27 series
L 45
55
65
75
95
115
145
175
225
275
A/F 31 34 36 45
d2 34 38 40 50
L4 12 15 20
All measurements are in millimetres
www.halesmastip.co.uk
SVG Valve GateH
ot
Ru
nn
er
61
Nozzle Compatiblity16 Series 19 Series 27 Series
BX BX BX
L Nozzle 55
65
75
95
115
145
All measurements are in millimetres
Valve Gate Assembly16 Series 19 Series 27 Series
BX BX BX
Model SVG 33
Actuation Type Pneumatic
Pin Size 2.5 3.0 5.0
Stroke 10
OL SVG 138 141 146
Gating Options
Valve Gate Open tip
OpenNut
BushNut
SprueNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
** Refer to Nozzle sectionof Technical Guide forfitting details
Overview and ApplicationsThe SVG (Single Valve Gate) system gives you precise control at the gate to achieveoptimal moulding conditions. This makes the SVG ideal for applications requiring highcosmetic gate finish, fast flow rates, large volume parts and dimensional accuracy.
FeaturesMould Design• Available for use with BX16, BX19 & BX27 series nozzles • Shares the same gate profiles as X range nozzles• Easy machining of pocketsOperation• Separate heaters for maximum temperature control• Reduced moulding pressure• Increased moulding window• Lower mould filling stress results and better part quality• Reduced gate cooling requirementsInstallation and Maintenance• Simple installation• Easy pin adjustment• Replaceable pin and seal• X range tip and nut options
Nozzle Compatiblity16 Series 19 Series 27 Series
BX BX BX
L Nozzle 55
65
75
95
115
145
metres
Valve Gate Assembly16 Series 19 Series 27 Series
BX BX BX
SVG 33
Pneumatic
2.5 3.0 5.0
10
138 141 146
Gating Options
Valve Gate Open tip
OpenNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
Nozzle Compatiblity16 Series 19 Series 27 Series
BX BX BX
L Nozzle 55
65
75
95
115
145
All measurements are in millimetres
Valve Gate Assembly16 Series 19 Series 27 Series
BX BX BX
Model SVG 33
Actuation Type Pneumatic
Pin Size 2.5 3.0 5.0
Stroke 10
OL SVG 138 141 146
Gating Options
Valve Gate Open tip
OpenNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
Nozzle Compatiblity16 Series 19 Series 27 Series
BX BX BX
L Nozzle 55
65
75
95
115
145
All measurements are in millimetres
Valve Gate Assembly16 Series 19 Series 27 Series
BX BX BX
Model SVG 33
Actuation Type Pneumatic
Pin Size 2.5 3.0 5.0
Stroke 10
OL SVG 138 141 146
Gating Options
Valve Gate Open tip
OpenNut
BushNut
SprueNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
** Refer to Nozzle sectionof Technical Guide forfitting details
www.halesmastip.co.uk
MVG Valve GateH
ot
Ru
nn
er
62
Availability13 Series 16 Series 19 Series 27 Series
MX BX MX BX MX BX BX
L 45
55
65
75
95
115
145
175
A/F 24 31 26 34 36 45
d2 28 34 30 38 40 50
L4 12 15 20
Hot Half Section
* 13 Series avaialbe in open nut and open tip only
Valve Gate Assembly13 Series * 16 Series 19 Series 27 Series
MX / BX MX / BX MX / BX BX
Model MVG40-2.0 x 250 MVG40-2.5 x 250 MVG40-3.0 x 250 MVG40-5.0 x 350
Actuation Type Pneumatic
Pin Size 2.0 2.5 3.0 5.0
Stroke 10
Valve Gate Open tip
OpenNut
BushNut
SprueNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
All measurements are in millimetres
Gating Options
Availability13 Series 16 Series 19 Series 27 Series
MX BX MX BX MX BX BX
L 45
55
65
75
95
115
145
175
A/F 24 31 26 34 36 45
d2 28 34 30 38 40 50
L4 12 15 20
Hot Half Section
* 13 Series avaialbe in open nut and open tip only
Valve Gate Assembly13 Series * 16 Series 19 Series 27 Series
MX / BX MX / BX MX / BX BX
Model MVG40-2.0 x 250 MVG40-2.5 x 250 MVG40-3.0 x 250 MVG40-5.0 x 350
Actuation Type Pneumatic
Pin Size 2.0 2.5 3.0 5.0
Stroke 10
Valve Gate Torpedo Tip
OpenNut
BushNut
All measurements are in millimetres
Gating Options
Overview and ApplicationsThe MVG (Manifold Valve Gate) system is ideal for all applications whichrequire high speed, sequential filling or highly cosmetic gates. Due to itsmultiple gating options and lack of material traps it will operate with themost demanding materials. The MVG is designed for easy installationdue to simple mounting in the backplate with integral airways.
FeaturesMould Design• Ability for close nozzle spacing. Minimal pitching is 75mm (can be
modified to fit 58mm pitching)• Backplates can be as thin as 55mm• Easy machining of the pockets• Pneumatic circuit is integrated with the backplateOperation• MVG is available for MX series and BX series nozzles• Reduced moulding pressure • Increased moulding window• Lower mould filling stress results in better part quality• Reduced gate cooling requirementsInstallation and Maintenance• Easy machining and installation• Easy pin adjustment and seal replacement while the mould remains
assembled
Availability13 Series 16 Series 19 Series 27 Series
MX BX MX BX MX BX BX
L 45
55
65
75
95
115
145
175
A/F 24 31 26 34 36 45
d2 28 34 30 38 40 50
L4 12 15 20
Hot Half Section
pen nut and open tip only
Valve Gate Assembly13 Series * 16 Series 19 Series 27 Series
MX / BX MX / BX MX / BX BX
MVG40-2.0 x 250 MVG40-2.5 x 250 MVG40-3.0 x 250 MVG40-5.0 x 350
Pneumatic
2.0 2.5 3.0 5.0
10
Valve Gate Open tip
OpenNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
All measurements are in millimetres
Gating Options
Availability13 Series 16 Series 19 Series 27 Series
MX BX MX BX MX BX BX
L 45
55
65
75
95
115
145
175
A/F 24 31 26 34 36 45
d2 28 34 30 38 40 50
L4 12 15 20
Hot Half Section
* 13 Series avaialbe in open nut and open tip only
Valve Gate Assembly13 Series * 16 Series 19 Series 27 Series
MX / BX MX / BX MX / BX BX
Model MVG40-2.0 x 250 MVG40-2.5 x 250 MVG40-3.0 x 250 MVG40-5.0 x 350
Actuation Type Pneumatic
Pin Size 2.0 2.5 3.0 5.0
Stroke 10
Valve Gate Open tip
OpenNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
All measurements are in millimetres
Gating Options
Availability13 Series 16 Series 19 Series 27 Series
MX BX MX BX MX BX BX
L 45
55
65
75
95
115
145
175
A/F 24 31 26 34 36 45
d2 28 34 30 38 40 50
L4 12 15 20
Hot Half Section
* 13 Series avaialbe in open nut and open tip only
Valve Gate Assembly13 Series * 16 Series 19 Series 27 Series
MX / BX MX / BX MX / BX BX
Model MVG40-2.0 x 250 MVG40-2.5 x 250 MVG40-3.0 x 250 MVG40-5.0 x 350
Actuation Type Pneumatic
Pin Size 2.0 2.5 3.0 5.0
Stroke 10
Valve Gate Open tip
OpenNut
BushNut
SprueNut
Valve Gate Torpedo Tip
OpenNut
BushNut
SprueNut
All measurements are in millimetres
Gating Options
www.halesmastip.co.uk
Manifold SystemsH
ot
Ru
nn
er
63
MastipTM recognises that themanifold is a vital part of thecomplete Hot Runner Systemand therefore designs everysystem to meet customer’srequirements including detaileddesigns for:
• Even part/cavity filling• Balanced material flow• Even heat profile• Ideal for technical
materials and fast colourchanges
Valve gate system can besupplied for either balanced orsequential fill requirements.
From single cavity to high cavityor multi material, thermal orvalve gating, we can supply asystem to suit your requirements.
www.halesmastip.co.uk
Hydraulic CylindersG
en
era
l
64
V160CTie rod cylinders according to ISO60202 Norms. World wideknown standards, bores from 25 to 200 mm. Strokes till 1500mm. End stroke magnetic switches option (till bore 100 mm.).
V230TTie rod cylinders heavy duty. High pressure, highspeed and temperature. Perfect on die castingmoulds or for large ejector plates. Bores from 32to 160 mm. Strokes till 1000 mm. End strokemagnetic switches option.
V250CBMThe short stroke “Magnetic” cylinder. Compact, light and versatile aluminium cylinder. Manifoldoil delivery option – with o-rings – Bores from 25 to 100 mm. Strokes 20 and 50 mm.
V220CBLSame philosophy as V250 but with strokes on demand till 500 mm. Bores from 32 to 100 mm.
V400CIThe extreme concept of compactness: we supply rod, piston and seals; you build the body inside themould according to our specifications. Range asV450.
V010Compact Pneumatic cylinders. Bores from 25 to100 mm. Strokes till 100 mm. Magnetic switchesoption.
V350CBRThe double rod alternative for the block cylinder heavy duty. On the rear side we can installtwo mechanical end stroke switches. Bores from 32 to 100 mm. Strokes 30 and 50 mm.
www.halesmastip.co.uk
Hydraulic CylindersG
en
era
l
65
V260LKThe locking rod hydraulic cylinder. In the end stroke position, rod out, a mechanical
lock provide a static force increase and permit to contrast the plastic injectionforce from 7 to 70 tons! Inductive end stroke option.
V450CBX + CUT SystemAn “all in one” solution is also available for a Cutting device. This
option is useful in the die casting molding for cleaning the moldedparts. We supply the complete cylinder with end stroke switches and a
kit of components to assemble and customize for the mounting onthe mold and for the cutting core by the mold maker. The device isavailable for Bore 32, 40 and 50 mm. in different stroke versions.
V220CBL + SCREWAn all-in-one solution for threaded cores for a compact and competitive
unscrewing solution. All standard component applied on a V220 cylinder. Magnetic switches option. Bores 32, 40 and 50 mm. Strokes 300, 400 and 500 mm.
VRA wide range of cylinder accessories: flanges, rod
end accessories, non return valves, thermo-isolating plates, flow limiters, switches controllers.
SIM08A versatile and liable switches connection box for all type of end stroke switches. 8plugs for connecting max. 8 switches and two clean contacts on exit, one for front
position and one for back position.
Important: When replacing the insert, be sureto tighten until hearing the engagement “click”.
www.halesmastip.co.uk
Date StampG
en
era
l
66
Date Insert
IA.2275SF IA.2275.. 2.2 7.5
IA.3075SF IA.3075.. 3 7.5
IA.3217SF IA.3217.. 3.2 17
IA.4717SF IA.4717.. 4.7 17
IA.5717SF IA.5717.. 5.7 17
IA.6717SF IA.6717.. 6.7 17
IA.8717SF IA.8717.. 8.7 17
IA.1007SF IA.1007.. 10.7 17
Arrow only Year C M
Inner insert is always at the same level as the body of the datestamp. Wide range of diameters. Only a H7 pocket required forassembly. No downtime when changing inserts. Internalmechanism guarantees secure replacement of inserts.
Mat.: INOX. 1.4034 - Hard. 51 ± 3 HRC.Maximum working temperature 150°C. Patented System
FA.0422SF FA.042212-.. FA.042204-.. FA.042200 4 2.2 6 3.5 12 4
FA.0530SF FA.053012-.. FA.053004-.. FA.053000 5 3 6 3.5 12 4
FA.0632SF FA.063212-.. FA.063205-.. FA.063200 6 3.2 12 4 20 5
FA.0847SF FA.084712-.. FA.084705-.. FA.084700 8 4.7 12 6 20 5
FA.1057SF FA.105712-.. FA.105706-.. FA.105700 10 5.7 12 8 20 6
FA.1267SF FA.126712-.. FA.126708-.. FA.126700 12 6.7 12 10 20 8
FA.1687SF FA.168712-.. FA.168710-.. FA.168700 16 8.7 12 12 20 10
FA.2007SF FA.200712-.. FA.200710-.. FA.200700 20 10.7 12 14 20 10
12 Months 12 Mon. + Yr Years Blank A C D E L N
Mat.: INOX. 1.4034Hardened 51 ± 3 HRC.
Important: Indicate the desired year after the referenceSpecial engraving available under request
www.halesmastip.co.uk
Double Date StampG
en
era
l
67
FD.080512-.. FD.080500 8 5.5 3 6 5
FD.120812-.. FD.120800 12 8 4 10 6
FD.161012-.. FD.161000 16 10.5 5.3 12 10
12 Month. + Yr Blank A B C E N
Important: Indicate the desired year after the referenceSpecial engraving available under request
Replaces the need for 2 separate date stamps. No need tomachine 2 separate holes. Minimum space required forinstallation.
Mat.: INOX. 1.4034 - Hard. 51 ± 3 HRC.Maximum working temperature 100°C. Patented System
www.halesmastip.co.uk
Reference InsertG
en
era
l
68
Inserts with engraving. Engraving by laser. Hardened and groundto size. Offers a standard solution to the molder.
Mat.: INOX. 1.4034Hardened 51 ± 3 HRC.
IR.1012.. 10 12 8 7 1.5 5.6
IR.1212.. 12 12 10 7 1.8 6.8
IR.1616.. 16 16 12 9 2.4 9
IR.2016.. 20 16 16 9 3.2 11.5
Ref. A B E H K S
Important: Indicate the desired model after the reference
www.halesmastip.co.uk
Air PoppetsG
en
era
l
69
Double Valve
VA.050412 5 3 12 1.5 4 7
VA.065212 6 5.2 12 1.5 4 7
VA.086512 8 6.5 12 1.5 4 7
VA.100812 10 8 12 2 8 7
VA.121012 12 10 12 2.5 10 7
VA.161320 16 13 20 3 12 12
VA.201720 20 17 20 3.5 16 12
Ref. A B C D E H
2
1 VA-FVVD
Helps part ejection with air. FV has a fi lter incorporated. VDallows venting. Wide range of diameters. Offers a standardsolution to the molder.
Mat.: INOX. 1.4034Hardened 51 ± 3 HRC. Working pressure 1.5-6 BARS.
FV.161320 16 13 20 14
FV.201720 20 17 20 18
Ref. A B C E
2
3
1 VA-FVVD
VD.080512 8 5 12 4 7
VD.100612 10 6 12 5 7
VD.120812 12 8 12 7 7
VD.161020 16 10 20 9 12
Ref. A B C E H
VA
FV
2
1 VA-FVVD
2
3
1 VA-FVVD
Standard Air Poppets
Filter Valve
www.halesmastip.co.uk
Tunnel Gate InsertsG
en
era
l
70
For more information, request the full Tunnel Gate Catalogue.
TGR 6 TGR/TGS 8 TGR/TGS 10 TGR/TGS 12 TGR/TGS 14
Gate point / 0.6 0,6 / 0,8 0,8 / 1,2 / 1,6 1,2 / 1,6 / 2,0 1,6 / 2,0 / 2,4 / 2,8
Ø Runner / 2.5 3 4 5 6
max. Shotweight (g)
NV 3 5 30 50 200
MV 2 4 20 35 120
HV 1 3 12 25 75
NV = low viscosityMV = medium viscosityHV = high viscosity
TGRTGS S2 with vestige
• for flat parting surfaces, including vestige with integrated cutting edge
• ready to use! No adjustments necessary
• available in 2 degrees of hardness (60 HRC / 40 HRC)
• available in round (TGR) and square (TGS) versions
www.halesmastip.co.uk
Limit SwitchesG
en
era
l
71
Limit Switch Mechanical
Limit Switch Inductive
For more information, request the full Strack catalogue.
www.halesmastip.co.uk
Limit SwitchesG
en
era
l
72
Connecting Lead
For more information, request the full Strackcatalogue.
www.halesmastip.co.uk
Limit SwitchesG
en
era
l
73
Adjusting and test facility
Connection Housing
Accessories
For more information, request the full Strack catalogue.
www.halesmastip.co.uk
AerosolsG
en
era
l
74
The Green Mould ProtectorExcellent thin film protection which is resistant to'creeping' into ejectors and inserts. Moulds or cleans offeasily using our IS/25 mould cleaner.
Clear Mould ProtectorClear non-staining protection to reduce risk ofcontamination. Easy to clean or mould off.
De-Watering Anti-Rust FluidNo ordinary WDI – IS/3 can be used to de-water, cleanand protect for up to 2 years indoor storage! Approvedby NATO & MOD.
IS/70 400ml
12 Cans Per Box
IS/60 400ml
12 Cans Per Box
IS/3 400ml
12 Cans Per Box
www.halesmastip.co.uk
AerosolsG
en
era
l
75
Mould Tool Cleaner XtraA superb high performance cleaner with fast evaporation.For cleaning greases, oils, adhesives, resins and muchmore. CO2 propellant means more product per can.High pressure spray makes it ideal for flushing outcavities.
Mould & Tool Cleaner SupaA high performance cleaner with a slow evaporation -can be left to penetrate for maximum effectiveness – willattack plastic residues and other stubborn deposits.
Heavy Duty Ejector Pin/Pillar &Brush LubricantA clear adhesive polymer lubricant designed to give longlasting, non contaminating lubrication on ejector pins.
Cutting & Tapping FluidCan be used on all metals including stainless steel toreduce friction and prevent pilling, galling & seizure.
Advanced Food Grade EjectorPin Lubrication• Fully Synthetic• Operating Temperature Up To 240 Oc• Nsf Reg. No. 122839• Clear – Non Creep• All Angle Valve
IS/25 480ml
12 Cans Per Box
IS/27 480ml
12 Cans Per Box
IS/40 400ml
12 Cans Per Box
IS/16 400ml
12 Cans Per Box
IS/45 400ml
12 Cans Per Box
www.halesmastip.co.uk
AerosolsG
en
era
l
76
Medium Silicone With Added Teflon10% silicone with added Teflon for maximum effectiveness. Temperaturestable up to 300oC.
Light Silicone Release5% silicone light duty for reduced markings on more delicete mouldings.Temperature stable up to 300oC.
Heavy Silicone Release15% silicone heavy duty release agent. Temperature stable up to 300oC.
Ptfe Dry Film ReleaseFast drying, non-staining PTFE release for 'one shot' applications – degradesat 275oC.
Non-Silicone ReleaseExcellent quick drying solvent/oil blend with good releasing properties.Temperature stable up to 220oC.
IS/5 400ml
12 Cans Per Box
IS/9 400ml
12 Cans Per Box
IS/10 400ml
12 Cans Per Box
IS/12 400ml
12 Cans Per Box
IS/13 400ml
12 Cans Per Box
www.halesmastip.co.uk
Ge
ne
ral
77
Medium Duty - Blue
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION50% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 40%OF FREE LENGTH
DEFLECTION FORLONG LIFE 25%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
Silicone Chrome Die SpringsRaymond
3/810mm
WIRE.089x.070
3/164.5mm
1.00 25
1.25
1.50
1.75
2.0
2.50
3.0
12.00
32
38
44
51
64
76
305
5.6
4.8
3.8
3.4
2.8
2.4
1.8
0.6
30
29
30
28
30
27
36
.625
.750
.875
1.000
1.250
1.500
6.000
24
23
24
22
24
22
29
.500
.600
.700
.800
1.000
1.200
4.800
15
14
15
14
15
14
18
.312
.375
.437
.500
.625
.750
3.000
35
34
36
35
38
35
48
.735
.906
1.053
1.248
1.581
1.931
7.961
200
100
100
100
100
100
50
28 .500 23 .400 14 .250 31 .545 200
1/213mm
WIRE.052x.093
9/327mm
1 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
10.0
9.2
7.6
6.8
6.4
5.2
4.0
3.0
58
57
60
64
65
60
53
.625
.750
.875
1.000
1.250
1.500
1.750
46
46
48
51
52
48
42
.500
.600
.700
.800
1.000
1.200
1.400
29
29
30
32
33
30
26
.312
.375
.437
.500
.625
.750
.875
66
68
71
79
81
76
67
.722
.893
1.048
1.234
1.550
1.891
2.233
100
100
100
100
50
50
50
4.50 115 2.5 53 2.125 45 1.80 28 1.125 71 2.850 50
5.50 140 2.1 57 2.750 46 2.2 28.6 1.375 71 3.420 50
6.50 165 1.6 52 3.250 42 2.6 26 1.625 60 3.860 50
7.50 191 1.1 41 3.750 33 3.000 20.6 1.875 45 4.140 50
12.00 305 0.8 48 6.000 38 4.800 24 3.000 56 6.931 50
50 .500 40 .400 25 .250 58 .578 100
5/816mm
WIRE.069x.109
11/328.5mm
1.00 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
13.0
12.8
10.8
9.6
8.8
6.0
5.6
4.8
81
84
88
75
84
84
.750
.875
1.000
1.250
1.500
1.750
64
65
67
70
60
67
67
.500
.600
.700
.800
1.000
1.200
1.400
40
41
42
44
38
42
42
.312
.375
.437
.500
.625
.750
.875
79
88
93
102
87
103
104
.617
.815
.969
1.157
1.445
1.840
2.159
100
50
50
50
50
50
50
4.00 102 4.4 88 2.000 70 1.600 44 1.000 113 2.576 50
12.00 305 1.4 84 6.000 67 1.800 42 3.000 109 7.782 50
52 .400 33 .250 55 .420 100
3/419mm
3/89.5mm
1.00 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
31.2
25.6
20.0
17.6
14.4
12.0
9.6
8.0
160
150
154
144
150
144
140
.625
.750
.875
1.000
1.250
1.500
1.750
128
120
123
115
120
115
112
.500
.600
.700
.800
1.000
1.200
1.400
80
75
77
72
75
72
70
.312
.375
.437
.500
.625
.750
.875
179
171
176
167
177
171
168
.699
.854
1.000
1.162
1.474
1.784
2.094
50
50
50
50
50
50
50
156 .500 125 .400 78 .250 170 .544 50
www.halesmastip.co.uk
Ge
ne
ral
78
Medium Duty - Blue continued
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION50% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 40%OF FREE LENGTH
DEFLECTION FORLONG LIFE 25%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
.
4.00 102 7.2 144 2.000 115 1.600 72 1.000 173 2.404 50
4.50 115 6.4 144 2.250 115 1.800 72 1.125 174 2.714 50
5.00 127 5.6 140 2.500 112 2.000 70 1.250 169 3.024 50
5.50 139 4.8 132 2.750 106 2.200 66 1.375 160 3.334 50
6.00 152 4.0 120 3.000 96 2.400 60 1.500 146 3.644 50
6.50 165 3.9 126 3.250 101 2.600 41 1.625 144 3.690 50
7.50 191 3.3 123 3.750 99 3.000 62 1.875 142 4.300 50
12.00 305 2.4 144 6.000 115 4.800 72 3.000 177 7.364 50
126mm
WIRE.100x.215
1/212.5mm
1.00 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
53.6
43.6
33.6
28.8
23.2
20.0
15.2
12.8
252
248
232
250
228
224
.750
.875
1.000
1.250
1.500
1.750
218
202
202
186
200
182
80
.500
.600
.700
.800
1.000
1.200
1.400
136
126
126
116
125
114
112
.312
.375
.437
.500
.625
.750
.875
272
274
272
258
282
260
266
.624
.816
.944
1.114
1.411
1.708
2.082
50
50
50
50
50
25
25
4.00 102 12.0 240 2.000 192 1.600 120 1.000 276 2.303 25
4.50 115 10.4 234 2.250 187 1.800 117 1.125 271 2.601 25
5.00 127 9.6 240 2.500 192 2.000 120 1.250 278 2.898 25
5.50 139 8.8 242 2.750 194 2.200 121 1.375 281 3.195 25
6.00 152 8.0 240 3.000 192 2.400 120 1.500 279 3.493 25
7.00 178 7.2 252 3.500 202 2.800 126 1.750 294 4.086 25
8.00 203 5.6 224 4.000 180 3.200 112 2.000 262 4.682 25
12.00 305 4.0 240 6.000 192 4.800 120 3.000 282 7.062 25
214 .400 134 .250 264 .493 50
1 1/432mm
WIRE.115x.285
5/815.5mm
1.50 38
1.75
2.00
2.50
3.00
3.50
4.00
4.50
44
51
64
76
89
102
115
49.6
42.4
35.2
28.8
24.0
20.0
17.6
16.0
371
352
360
360
350
352
360
.875
1.000
1.250
1.500
1.750
2.000
2.500
296
282
288
288
280
282
288
.700
.800
1.000
1.200
1.400
1.600
1.800
185
176
180
180
175
176
180
.437
.500
.625
.750
.875
1.000
1.125
402
398
419
428
422
428
442
.947
1.130
1.456
1.782
2.108
2.434
2.760
50
50
25
25
25
25
25
5.00 127 13.6 340 2.500 272 2.000 170 1.250 420 3.086 25
5.50 139 12.8 352 2.750 282 2.200 176 1.375 437 3.412 25
6.00 152 12.0 360 3.000 288 2.400 180 1.500 449 3.738 25
7.00 178 10.4 364 3.500 291 2.800 182 1.750 457 4.390 25
8.00 203 8.8 352 4.000 282 3.200 176 2.000 444 5.042 25
10.00 254 7.2 360 5.000 288 4.000 180 2.500 457 6.346 25
12.00 305 5.6 336 6.000 269 4.800 168 3.000 428 7.650 25
372 .750 298 .600 186 .375 399 .804 50
WIRE075x.165
www.halesmastip.co.uk
Ge
ne
ral
79
Medium Duty - Blue
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION50% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 40%OF FREE LENGTH
DEFLECTION FORLONG LIFE 25%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
1 1/238mm
WIRE.135x.345
3/419mm
2.00 51
2.50
3.00
3.50
4.00
4.50
5.00
5.50
64
76
89
102
115
127
139
44.8
36.8
33.6
26.4
21.6
20.8
20.0
16.8
460
504
462
432
468
500
462
1.250
1.500
1.750
2.000
2.250
2.500
2.750
368
403
370
346
374
400
370
1.000
1.200
1.400
1.600
1.800
2.000
2.200
230
252
231
216
234
250
231
.625
.750
.875
1.000
1.125
1.250
1.375
532
597
547
526
575
619
576
1.446
1.776
2.072
2.436
2.766
3.096
3.426
25
25
25
25
25
25
25
6.00 152 14.4 432 3.000 346 2.400 216 1.500 540 3.756 25
7.00 178 13.6 476 3.500 381 2.800 238 1.750 601 4.416 25
8.00 203 12.8 512 4.000 410 3.200 256 2.000 650 5.076 25
10.00 254 8.8 440 5.000 352 4.000 220 2.500 563 6.396 25
12.00 305 8.0 480 6.000 384 4.800 240 3.000 606 7.580 25
448 1.000 358 .800 224 .500 500 1.116 25
251mm
WIRE.195x.468
125mm
2.50 64
3.00
3.50
4.00
4.50
5.00
5.50
6.00
76
89
102
115
127
139
152
89.6
76.8
64.8
55.2
47.2
41.6
39.2
35.2
1152
1134
1104
1062
1040
1078
1056
1.500
1.750
2.000
2.250
2.500
2.750
3.000
922
907
883
850
832
862
845
1.200
1.400
1.600
1.800
2.000
2.200
2.400
576
567
552
531
520
539
528
.750
.875
1.000
1.125
1.250
1.375
1.500
1243
1245
1228
1193
1177
1228
1209
1.619
1.922
2.224
2.527
2.830
3.132
3.435
25
25
25
25
25
25
25
7.00 178 31.2 1092 3.500 874 2.800 546 1.750 1260 4.040 25
8.00 203 25.6 1024 4.000 819 3.200 512 2.000 1189 4.645 10
10.00 254 20.8 1040 5.000 832 4.000 520 2.500 1218 5.857 10
12.00 305 16.8 1008 6.000 806 4.800 504 3.000 1187 7.067 10
1120 1.250 896 1.000 560 .625 1179 1.316 25
www.halesmastip.co.uk
Ge
ne
ral
80
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION37% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 25%OF FREE LENGTH
DEFLECTION FORLONG LIFE 20%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
Medium Heavy-Duty - RedSilicone Chrome Die SpringsRaymond
3/810mm
WIRE.046x.067
3/164.5mm
1.00 25 9.0 33 .370 23 .250 17 .200 41 .456 200
1.25 32 74.3 34 .462 23 .312 18 .250 45 .611 200
1.50 38 6.7 37 .555 25 .375 20 .300 54 .802 100
1.75 44 5.8 35 .647 25 .437 20 .250 52 .922 100
2.00 51 5.0 37 .740 25 .500 20 .400 53 1.054 100
2.50 64 4.2 39 .925 26 .625 21 .500 56 1.341 100
3.00 76 3.0 33 1.110 23 .750 18 .600 48 1.605 100
12.00 305 0.9 40 4.440 27 3.000 22 2.400 62 7.081 50
1/213mm
WIRE.061x.093
9/327mm
1.00 25 16.8 62 .370 42 .250 34 .200 84 .499 100
1.25 32 13.9 64 .462 43 .312 35 .250 90 .647 100
1.50 38 12.0 67 .555 45 .375 36 .300 97 .811 100
1.75 44 10.4 67 .647 45 .437 36 .350 100 .962 100
2.00 51 8.7 64 .740 44 .500 35 .400 96 1.108 100
2.50 64 6.8 63 .925 43 .625 34 .500 95 1.404 50
3.00 76 2.7 63 1.110 43 .750 34 .600 98 1.717 50
3.50 89 4.7 61 1.295 41 .875 33 .700 94 1.998 50
12.00 3.5 1.2 53 4.440 36 3.000 29 2.400 79 6.616 50
5/816mm
WIRE.081x.117
11/328.5mm
1.00 25 27.7 102 .370 69 .250 55 .200 106 .383 100
1.25 32 20.8 96 .462 65 .312 52 .250 104 .498 100
1.50 38 19.0 105 .555 71 .375 57 .300 126 .664 50
1.75 44 16.8 109 .647 73 .437 59 .350 141 .837 50
2.00 51 14.8 110 .740 74 .500 59 .400 148 .997 50
2.50 64 11.5 106 .925 72 .625 58 .500 143 1.246 50
3.00 76 10.0 111 1.110 75 .750 60 .600 156 1.558 50
3.50 89 8.5 110 1.295 74 .875 60 .700 155 1.828 50
4.00 102 7.6 112 1.482 76 1.000 61 .800 166 2.182 50
12.00 305 2.7 120 4.440 81 3.000 65 2.400 184 6.817 50
3/419mm
WIRE.093x.156
3/89.5mm
1.00 25 57.6 213 .370 144 .250 115 .200 259 .450 50
1.25 32 44.8 207 .462 140 .3612 112 .250 265 .592 50
1.50 38 32.0 178 .555 120 .375 96 .300 235 .735 50
1.75 44 28.8 186 .647 126 .437 101 .350 252 .874 50
2.00 51 24.8 184 .740 124 .500 99 .400 253 1.020 50
2.50 64 19.2 178 .925 120 .625 96 .500 251 1.305 50
3.00 76 14.4 160 1.110 108 .750 86 .600 229 1.590 50
3.50 89 12.8 166 1.295 112 .875 90 .700 240 1.875 50
4.00 102 12.0 178 1.480 120 1.000 96 .800 259 2.160 50
4.50 115 11.2 186 1.665 136 1.125 101 .900 274 2.445 50
5.00 127 10.4 192 1.850 130 1.250 104 1.000 286 2.753 50
5.50 139 9.6 195 2.035 132 1.375 106 1.100 289 3.014 50
6.00 152 8.0 178 2.220 120 1.500 96 1.200 264 3.300 50
12.00 305 3.6 160 4.440 108 3.000 86 2.400 232 6.455 50
www.halesmastip.co.uk
Ge
ne
ral
81
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION37% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 25%OF FREE LENGTH
DEFLECTION FORLONG LIFE 20%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
126mm
WIRE.115x.218
1/212.5mm
1.00 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
72.0
62.4
49.6
44.0
36.8
28.8
23.2
21.6
288
275
285
272
266
258
280
.462
.555
.647
.740
.925
1.110
1.295
195
186
192
184
180
174
189
.312
.375
.437
.500
.625
.750
.875
156
149
154
147
144
139
151
.250
.300
.350
.400
.500
.600
.700
300
350
364
368
373
369
407
.481
.706
.828
1.000
1.295
1.589
1.883
50
50
50
50
50
25
25
4.00 102 18.4 272 1.480 184 1.000 147 .800 401 2.179 25
4.50 115 15.2 253 1.665 171 1.125 137 .900 376 2.471 25
5.00 127 14.4 266 1.850 180 1.250 144 1.000 398 2.766 25
5.50 139 12.8 260 2.035 176 1.375 141 1.100 377 2.942 25
6.00 152 11.2 249 2.220 168 1.500 134 1.200 362 3.236 25
7.00 178 9.6 249 2.590 168 1.750 134 1.400 367 3.825 25
8.00 203 8.8 260 2.960 176 2.000 141 1.600 388 4.413 25
12.00 305 5.6 249 4.440 168 3.000 134 2.400 379 6.767 25
266 .370 180 .250 144 .200 297 .412 50
1 1/432mm
WIRE.156x.281
5/815.5mm
1.50 38
1.75
2.00
2.50
3.00
3.50
4.00
4.50
44
51
64
76
89
102
115
114.4
100.8
86.4
62.4
51.2
44.0
36.8
32.0
652
639
577
568
570
545
533
.647
.740
.925
1.110
1.295
1.480
1.665
440
432
390
384
385
368
360
.437
.500
.625
.750
.875
1.000
1.125
353
346
312
307
308
294
288
.350
.400
.500
.600
.700
.800
.900
790
792
734
735
745
719
708
.784
.917
1.176
1.435
1.694
1.954
2.213
50
50
25
52
25
25
25
5.00 127 27.2 503 1.850 340 1.250 272 1.000 672 2.472 25
5.50 139 26.4 537 2.035 363 1.375 290 1.100 720 2.731 25
6.00 152 23.2 515 2.220 348 1.500 278 1.200 712 3.071 25
7.00 178 20.0 518 2.590 350 1.750 280 1.400 702 3.509 25
8.00 203 18.4 545 2.960 368 2.000 294 1.600 741 4.028 25
10.00 254 12.8 474 3.700 320 2.500 256 2.000 648 5.065 25
12.00 305 11.2 497 4.440 336 3.000 269 2.400 683 6.102 25
635 .555 429 .375 343 .300 752 .657 50
1 1/238mm
3/419mm
2.00 51
2.50
3.00
3.50
4.00
4.50
5.00
64
76
89
102
115
127
108.0
85.6
62.4
52.8
48.0
43.2
36.8
792
693
684
710
719
681
.925
1.100
1.295
1.480
1.665
1.850
535
468
462
480
486
460
.625
.750
.875
1.000
1.125
1.250
428
374
370
384
389
368
.500
.600
.700
.800
.900
1.000
988
882
883
928
947
902
1.154
1.414
1.673
1.933
2.192
2.452
25
25
25
25
25
25
799 .740 540 .500 432 .400 966 .894 25
Medium Heavy-Duty - Red
www.halesmastip.co.uk
Ge
ne
ral
82
Medium Heavy-Duty - Red continued
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION37% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 25%OF FREE LENGTH
DEFLECTION FORLONG LIFE 20%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
WIRE.187x.312
5.50 139 34.4 700 2.035 473 1.375 378 1.100 933 2.712 25
6.00 152 30.4 675 2.220 456 1.500 365 1.200 903 2.971 25
7.00 178 26.4 684 2.590 462 1.750 370 1.400 934 3.359 25
8.00 203 20.8 616 2.960 416 2.00 333 1.600 844 4.058 25
10.00 254 17.6 651 3.700 440 2.500 352 2.000 907 5.154 25
12.00 305 14.4 639 4.440 432 3.000 346 2.400 883 6.135 25
251mm
WIRE.225x.437
125mm
2.50 64
3.00
3.50
4.00
4.50
5.00
5.50
6.00
76
89
102
115
127
139
152
118.4
96.0
80.0
66.4
60.0
56.0
50.4
47.2
1066
1036
983
999
1036
1026
1048
1.110
1.295
1.480
1.665
1.850
2.035
2.220
720
700
664
675
700
693
708
.750
.875
1.000
1.125
1.250
1.375
1.500
576
560
531
540
560
554
566
.600
.700
.800
.900
1.000
1.100
1.220
1334
1328
1282
1320
1383
1381
1421
1.390
1.660
1.930
2.200
2.470
2.740
3.010
25
25
25
25
25
25
25
7.00 178 40.0 1036 2.590 700 1.750 560 1.400 1420 3.550 25
8.00 203 35.2 1042 2.960 704 2.000 563 1.600 1440 4.090 10
10.00 254 24.0 888 3.700 600 2.500 480 2.000 1241 5.170 10
12.00 305 22.4 995 4.440 672 3.000 538 2.400 1400 6.250 10
1095 .925 740 .625 592 .500 1326 1.120 25
www.halesmastip.co.uk
Ge
ne
ral
83
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION30% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 20%OF FREE LENGTH
DEFLECTION FORLONG LIFE 15%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
Silicone Chrome Die SpringsRaymond
3/810mm
WIRE.054x.072
3/164.5mm
1.00 25 12.4 37 .300 25 .200 18 .150 44 .354 200
1.25 32 9.8 37 .375 25 .250 18 .187 45 .463 200
1.50 38 9.6 43 .450 29 .300 22 .225 55 .573 100
1.75 44 8.4 44 .525 29 .350 22 .262 58 .686 100
2.00 51 7.2 43 .600 29 .400 22 .300 57 .792 100
2.50 64 6.0 45 .750 30 .500 23 .375 66 1.011 100
3.00 76 4.2 38 .900 25 .600 19 .450 51 1.216 100
12.00 305 1.2 43 3.600 29 2.400 22 1.800 70 5.818 50
1/213mm
WIRE.070x.093
9/327mm
1.00 25 23.6 71 .300 47 .200 35 .150 107 .455 100
1.25 32 18.6 70 .375 47 .250 35 .187 109 .587 100
1.50 38 16.4 74 .450 49 .300 37 .225 121 .737 100
1.75 44 13.8 72 .525 48 .350 36 .262 116 .844 100
2.00 51 11.0 66 .600 44 .400 33 .300 110 1.000 100
2.50 64 8.4 63 .750 42 .500 32 .375 106 1.264 50
3.00 76 7.4 67 .900 44 .600 33 .450 113 1.528 50
3.50 89 6.4 67 1.050 45 .700 34 .525 116 1.810 50
12.00 305 1.6 58 3.600 38 2.400 29 1.800 100 6.266 50
5/816mm
WIRE.093x.125
11/328.5mm
1.00 25 42.4 127 .300 85 .200 64 .150 151 .357 100
1.25 32 29.6 111 .375 74 .250 55 .187 140 .474 100
1.50 38 27.2 122 .450 82 .300 61 .225 165 .606 50
1.75 44 24.0 126 .525 84 .350 63 .262 175 .730 50
2.00 51 20.8 125 .600 83 .400 62 .300 179 .860 50
2.50 64 17.0 128 .750 85 .500 64 .375 190 1.118 50
3.00 76 14.4 130 .900 86 .600 65 .450 198 1.375 50
3.50 89 12.2 128 1.050 85 .700 64 .525 199 1.633 50
4.00 102 10.8 130 1.200 86 .800 65 .600 204 1.890 50
12.00 305 4.0 144 3.600 96 2.400 72 1.800 201 5.016 50
3/419mm
WIRE.125x.165
3/89.5mm
1.00 25 108.0 324 .300 216 .200 162 .150 324 .300 50
1.25 32 86.8 326 .375 217 .250 162 .187 353 .407 50
1.50 38 65.6 295 .450 197 .300 148 .225 337 .514 50
1.75 44 60.0 315 .525 210 .350 157 .262 361 .601 50
2.00 51 49.6 298 .600 198 .400 149 .300 361 .728 50
2.50 64 37.6 282 .750 188 .500 141 .375 354 .924 50
3.00 76 31.2 281 .900 187 .600 140 .450 361 1.156 50
3.50 89 26.4 277 1.050 185 .700 139 .525 361 1.369 50
4.00 102 23.2 278 1.200 186 .800 139 .600 367 1.583 50
4.50 115 20.0 270 1.350 180 .900 135 .675 359 1.797 50
5.00 127 17.6 264 1.500 176 1.000 132 .750 354 2.011 50
5.50 139 16.0 264 1.650 176 1.100 132 .825 356 2.225 50
6.00 152 14.4 259 1.800 173 1.200 130 .900 351 2.438 50
12.00 305 7.2 259 360.00 173 2.400 130 1.800 382 5.300 50
Heavy-Duty - Gold
www.halesmastip.co.uk
Ge
ne
ral
84
Heavy-Duty - Gold continued
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION30% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 20%OF FREE LENGTH
DEFLECTION FORLONG LIFE 15%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
126mm
WIRE.158x.225
1/212.5mm
1.00 25
1.25
1.50
1.75
2.00
2.50
3.00
3.50
32
38
44
51
64
76
89
208.0
171.2
118.4
104.0
84.0
68.0
54.4
45.6
533
546
504
510
490
479
.450
.525
.600
.750
.900
1.050
428
355
364
336
340
326
319
.250
.300
.350
.400
.500
.600
.700
320
266
272
252
255
245
239
.187
.225
.262
.300
.375
.450
.525
540
598
655
600
628
617
612
.315
.505
.630
.714
.924
1.134
1.343
50
50
50
50
50
25
25
4.00 102 40.0 480 1.200 320 .800 240 .600 621 1.553 25
4.50 115 35.2 475 1.350 317 .900 238 .675 621 1.763 25
5.00 127 31.2 468 1.500 312 1.000 234 .750 615 1.972 25
5.50 139 28.8 475 1.650 317 1.100 238 .825 628 2.182 25
6.00 152 25.6 461 1.800 307 1.200 230 .900 612 2.392 25
7.00 178 22.4 470 2.100 314 1.400 235 1.050 630 2.811 25
8.00 203 19.2 461 2.400 307 1.600 230 1.200 620 3.230 25
12.00 305 12.0 432 3.600 288 2.400 216 1.800 589 4.908 25
416 .200 312 .150 614 .295 50
1 1/432mm
WIRE.200x.295
5/815.5mm
1.50 38
1.75
2.00
2.50
3.00
3.50
4.00
4.50
44
51
64
76
89
102
115
212.0
181.6
149.6
117.6
95.2
75.2
66.4
58.4
953
898
882
857
790
797
788
.525
.600
.750
.900
1.050
1.200
1.350
636
598
588
571
526
531
526
.350
.400
.500
.600
.700
.800
.900
476
449
441
428
395
398
394
.262
.300
.375
.450
.525
.600
.675
1017
950
964
957
895
913
911
.560
.635
.820
1.005
1.190
1.375
1.560
50
50
25
25
25
25
25
5.00 127 49.6 744 1.500 496 1.000 372 .750 866 1.745 25
5.50 139 47.2 779 1.650 519 1.100 389 .828 911 1.930 25
6.00 152 42.4 763 1.800 509 1.200 382 .900 897 2.115 25
7.00 178 36.8 773 2.100 515 1.400 386 1.050 914 2.485 25
8.00 203 32.8 787 2.400 525 1.600 394 1.200 936 2.855 25
10.00 254 25.6 768 3.000 512 2.000 384 1.500 920 3.595 25
12.00 305 20.8 749 3.600 499 2.400 374 1.800 902 4.335 52
954 .450 636 .300 477 .225 954 .450 50
1 1/238mm
3/419mm
2.00 51
2.50
3.00
3.50
4.00
4.50
5.00
64
76
89
102
115
127
190.4
148.8
122.4
106.4
91.2
78.4
71.2
1116
1102
1117
1094
1058
1068
.750
.900
1.050
1.200
1.350
1.500
744
734
745
730
706
712
.500
.600
.700
.800
.900
1.000
558
551
559
547
529
534
.375
.450
.525
.600
.675
.750
1446
1443
1535
1505
1478
1509
.972
1.179
1.443
1.650
1.885
2.120
25
25
25
25
25
25
1142 .600 762 .400 571 .300 1346 .707 25
www.halesmastip.co.uk
Ge
ne
ral
85
Heavy-Duty - Gold
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION30% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 20%OF FREE LENGTH
DEFLECTION FORLONG LIFE 15%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
WIRE.225x.350
5.50 139 64.0 1056 1.650 704 1.100 528 .825 1508 2.357 25
6.00 152 58.4 1051 1.800 701 1.200 526 .900 1514 2.592 25
7.00 178 49.6 1042 2.100 694 1.400 521 1.050 1520 3.064 25
8.00 203 43.2 1037 2.400 691 1.600 518 1.200 1527 3.535 25
10.00 254 34.4 1032 3.000 688 2.000 516 1.500 1540 4.477 25
12.00 305 28.8 1037 3.600 691 2.400 518 1.800 1561 5.420 25
251mm
WIRE.280x.470
125mm
2.50 64
3.00
3.50
4.00
4.50
5.00
5.50
6.00
76
89
102
115
127
139
152
220.0
185.6
160.0
133.6
117.6
104.0
92.8
83.2
1670
1680
1603
1588
1560
1531
1498
.900
1.050
1.200
1.350
1.500
1.650
1.800
1114
1220
1069
1058
1040
1021
998
.600
.700
.800
.900
1.000
1.100
1.200
835
840
802
794
780
766
749
.450
.525
.600
.675
.750
.825
.900
2189
2227
2188
2216
2214
2204
2181
1.147
1.392
1.638
1.884
2.129
2.375
2.621
25
25
25
25
25
25
25
7.00 178 73.6 1546 2.100 1030 1.400 773 1.050 2290 3.112 25
8.00 203 64.0 1536 2.400 1024 1.600 768 1.200 2306 3.603 10
10.00 254 48.8 1464 3.000 976 2.000 732 1.500 2238 4.586 10
12.00 305 40.0 1440 3.600 960 2.400 720 1.800 2227 5.568 10
1650 .750 1100 .500 825 .375 1982 .901 25
www.halesmastip.co.uk
Ge
ne
ral
86
Extra Heavy-Duty - Green
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION25% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 20%OF FREE LENGTH
DEFLECTION FORLONG LIFE 15%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
Silicone Chrome Die SpringsRaymond
3/810mm
WIRE.059x.097
3/164.5mm
1.00 25 22.0 55.0 .250 44 .200 33 .150 56 .275 200
1.25 32 17.0 53.2 .312 43 .250 32 .187 54 .350 200
1.50 38 14.5 54.4 .375 43 .300 32 .225 57 .440 100
1.75 44 11.5 50.4 .437 39 .350 29 .262 55 .480 100
2.00 51 10.0 50.0 .500 40 .400 30 .300 54 .600 100
2.50 64 8.0 50.0 .625 40 .500 30 .375 55 .770 100
3.00 76 6.5 48.8 .750 39 .600 29 .450 55 .920 100
12.00 305 1.5 45.0 3.00 36 2.400 27 1.800 58 3.850 50
1/213mm
WIRE.084x.097
9/327mm
1.00 25 32.0 80.0 .250 64 .200 48 .150 103 .295 100
1.25 32 24.0 75.1 .312 60 .250 45 .187 97 .360 100
1.50 38 20.0 75.0 .375 60 .300 45 .225 103 .470 100
1.75 44 17.0 74.5 .437 60 .350 45 .262 99 .530 100
2.00 51 14.0 70.0 .500 56 .400 42 .300 126 .680 100
2.50 64 11.5 71.9 .625 56 .500 42 .375 102 .800 50
3.00 76 9.0 67.5 .750 54 .600 41 .450 102 .980 50
3.50 89 8.0 70.0 .875 56 .700 42 .525 94 1.180 50
12.00 305 2.5 75.0 3.00 60 2.400 45 1.800 104 4.150 50
5/816mm
WIRE.110x.126
11/328.5mm
1.00 25 63.0 157.5 .250 126 .200 95 .150 208 .280 100
1.25 32 47.0 147.1 .312 117 .250 88 .187 187 .340 100
1.50 38 38.0 142.5 .375 114 .300 86 .225 184 .420 50
1.75 44 32.0 140.2 .437 112 .350 84 .262 181 .490 50
2.00 51 29.0 145.0 .500 116 .400 87 .300 180 .560 50
2.50 64 22.0 137.5 .625 110 .500 83 .375 1.95 .780 50
3.00 76 18.0 135.0 .750 108 .600 81 .450 200 .980 50
3.50 89 16.0 140.0 .875 112 .700 84 .525 192 1.100 50
4.00 102 13.5 135.0 1.00 108 .800 81 .600 204 1.360 50
12.00 305 4.5 135.0 3.00 108 2.400 81 1.800 197 4.100 50
3/419mm
WIRE.135x.165
3/89.5mm
1.00 25 140.0 350.0 .250 280 .200 210 .150 335 .215 50
1.25 32 110.0 344.3 .312 275 .250 206 .187 340 .300 50
1.50 38 89 333.8 .375 268 .300 200 .225 420 .460 50
1.75 44 75.0 328.5 .437 264 .350 198 .262 350 .460 50
2.00 51 63.5 317.5 .500 254 .400 190 .300 330 .510 50
2.50 64 50.0 312.5 .625 250 .500 188 .375 355 .710 50
3.00 76 40.5 303.7 .750 243 .600 182 .450 345 .840 50
3.50 89 34.5 301.9 .875 242 .700 181 .525 360 1.040 50
4.00 102 30.0 300.0 1.00 240 .800 180 .600 360 1.200 50
4.50 115 26.5 298.1 1.125 238 .900 178 .675 385 1.460 50
5.00 127 23.5 293.7 1.250 235 1.000 177 .750 352 1.500 50
5.50 139 21.5 295.6 1.375 234 1.100 176 .825 362 1.700 50
6.00 152 19.5 292.5 1.500 234 1.200 176 .900 380 1.850 50
12.00 305 9.5 285.0 3.00 228 2.400 171 1.800 375 4.150 50
www.halesmastip.co.uk
Ge
ne
ral
87
Extra Heavy-Duty - Green
HOLEDIA.
RODDIA.
lb at1/10”DEFL. PRESSURE
POUNDSLENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
PRESSUREPOUNDS
LENGTHOF DEFL.
MAXIMUM DEFLECTION25% OF FREE LENGTH
DEFLECTION FORAVERAGE LIFE 20%OF FREE LENGTH
DEFLECTION FORLONG LIFE 15%
OF FREE LENGTH
TOTAL TRAVELTO SOLID NO. PER
BOX
FREE LENGTH
in. mm
126mm
WIRE.188x.225
1/212.5mm
1.50 38 184.8 693 .375 555 .300 416 .225 632 .342 50
2.00 51 116.0 580 .500 464 .400 348 .300 567 .489 50
2.50 64 89.6 560 .625 448 .500 336 .375 571 .637 50
3.00 76 73.6 552 .750 442 .600 331 .450 615 .835 25
3.50 89 62.4 546 .875 437 .700 328 .525 613 .982 25
4.00 102 55.2 552 1.000 442 .800 331 .600 651 1.180 25
4.50 115 48.8 549 1.125 439 .900 329 .675 672 1.378 25
5.00 127 43.2 540 1.375 432 1.000 324 .750 659 1.526 25
6.00 152 36.0 540 1.500 432 1.200 324 .900 674 1.871 25
12.00 305 17.6 528 3.000 423 2.400 317 1.800 694 3.944 25
1 1/432mm
WIRE.225x.295
5/815.5mm
2.00 51 192.0 960 .500 768 .400 577 .300 1002 .522 50
2.50 64 144.0 900 .625 720 .500 540 .375 1045 .726 25
3.00 76 118.4 888 .750 710 .600 533 .450 1102 .931 25
3.50 89 100.8 882 .875 706 .700 530 .525 1144 1.135 25
4.00 102 84.0 840 1.000 673 .800 505 .600 1075 1.280 25
4.50 115 78.4 882 1.125 706 .900 529 .675 1164 1.485 25
5.00 127 68.0 850 1.375 680 1.000 510 .750 1149 1.689 25
6.00 152 56.0 840 1.500 672 1.200 504 .900 1142 2.039 25
8.00 203 41.6 832 2.000 666 1.600 499 1.200 1164 2.797 25
10.00 254 33.6 840 2.500 672 2.000 504 1.500 1194 3.555 25
12.00 305 26.4 792 3.000 636 2.400 475 1.800 1076 4.077 25
1 1/238mm
WIRE.300x.350
3/419mm
2.00 51 376.0 1880 .500 1505 .400 1128 .300 1950 .495 25
2.50 64 294.4 1840 .625 1472 .500 1104 .375 1840 .625 25
3.00 76 231.2 1734 .750 1387 .600 1040 .450 1896 .820 25
3.50 89 196.0 1715 .875 1372 .700 1029 .525 1911 .975 25
4.00 102 171.2 1712 1.000 1370 .800 1027 .600 2001 1.169 25
4.50 115 148.0 1665 1.125 1332 .900 999 .675 2017 1.363 25
5.00 127 136.0 1700 1.375 1360 1.000 1020 .750 2118 1.557 25
6.00 152 110.4 1656 1.500 1325 1.200 994 .900 2147 1.945 25
8.00 203 80.8 1616 2.00 1293 1.600 970 1.200 2199 2.721 25
10.00 254 67.2 1680 2.500 1344 2.000 1008 1.500 2350 3.497 25
12.00 305 54.4 1632 3.000 1304 2.400 980 1.800 2325 4.273 25
251mm
WIRE.365x.460
125mm
2.50 64 381.6 2385 .625 1908 .500 1431 .375 2851 .747 25
3.00 76 312.0 2340 .750 1872 .600 1404 .450 2702 .866 25
3.50 89 254.4 2226 .875 1781 .700 1336 .525 2310 .908 25
4.00 102 220.0 2200 1.000 1760 .800 1320 .600 2691 1.223 25
4.50 115 188.8 2124 1.125 1700 .900 1274 .675 2622 1.389 25
5.00 127 172.8 2164 1.250 1728 1.000 1296 .750 2428 1.405 25
6.00 152 141.6 2124 1.500 1700 1.200 1275 .900 2280 1.610 25
8.00 203 100.0 2000 2.000 1600 1.600 1200 1.200 2234 2.234 10
10.00 254 84.0 2100 2.500 1680 2.000 1260 1.500 2448 2.914 10
12.00 305 71.2 2136 3.000 1710 2.4100 1282 1.800 3184 4.472 10
www.halesmastip.co.uk88
Table of ISA Standard Tolerances in Microns(1 micron = 0.001mm / 25.4 micron = 0.001 inches
Designation Application up to 3mm. 3 to 6mm. 6 to 10mm. 10 to 18mm. 18 to 30mm. 30 to 50mm.
-20 -30 -40 -50 -65 -80-45 -60 -76 -93 -117 -142
-6 -10 -13 -16 -20 -25-16 -22 -28 -34 -41 -50
+16 +22 +28 +34 +41 +50+7 +10 +13 +16 +20 +25
-2 -4 -5 -6 -7 -9-6 -9 -11 -14 -16 -20
-2 -4 -5 -6 -7 -9-8 -12 -14 -17 -20 -25
0 0 0 0 0 0-3 -4 -4 -5 -6 -7
0 0 0 0 0 0-4 -5 -6 -8 -9 -11
0 0 0 0 0 0-6 -8 -9 -11 -13 -16
0 0 0 0 0 0-10 -12 -15 -18 -21 -25
0 0 0 0 0 0-25 -30 -36 -43 -52 -62
0 0 0 0 0 0-60 -75 -90 -110 -210 -250
+4 +5 +6 +8 +9 +110 0 0 0 0 0
+10 +12 +15 +18 +21 +250 0 0 0 0 0
+14 +18 +22 +27 +33 +390 0 0 0 0 0
+2 +3 +4 +5 +5 +6-2 -2 -2 -3 -4 -5
+4 +6 +7 +8 +9 +11-2 -2 -2 -3 -4 -5
+7 +9 +10 +12 +13 +15-2 -3 -5 -6 -8 -10
+10 +12 +15 +18+1 +1 +2 +2
+7 +9 +12 +15 +17 +20+2 +4 +6 +7 +8 +9
+9 +12 +15 +18 +21 +25+2 +4 +6 +7 +8 +9
+13 +16 +19 +23 +28 +32+6 +8 +10 +12 +15 +17
+16 +20 +24 +29 +35 +42+9 +12 +15 +18 +22 +26
+19 +23 +28 +34 +41 +50+12 +15 +19 +23 +28 +34
+18 +24 +29 +36 +44 +54+14 +19 +23 +28 +35 +43
+22 +27 +32 +39 +48 +59+15 +19 +23 +28 +35 +43
Ground surfaces
Drill guides-I.D.
Ejector pins
Guide pins (die sets)
Punches D.C. F(pt)
Punch guides-I.D Reamers
Die inserts or buttons-I.D.(A&B)
Die inserts-O.D(B)
Punches E,F(shk) Dowels
Die inserts-O.D.(A) Guide bushes-O.D.
d 9
f 7
F 7
g 5
g 6
h 4
h 5
h 6
h 7
h 9
h 11
H 5
H 7
H 8
j 5
j 6
j 7
k 6
m 5
m 6
n 6
p 6
r 6
s 5
s 6
www.halesmastip.co.uk
Suppliers to the Tooling & Plastic Industry
HALES TOOL & DIE LIMITEDUnit 14, Heybridge House Ind. Est.
The Causeway, Maldon,Essex. CM9 4XL.United Kingdom
Email: [email protected]
Phone: 08700 33 2001Fax: 08700 33 2002