HA/LP® High Altitude/Low Profile Oxygen Mask
GENTEX High Altitude/Low Profile (HA/LP®)
Oxygen Masks are designed for use in both
pressure breathing for G (PBG) equipped high
performance fighter/attack aircraft and Non-PBG
equipped aircraft. HA/LP Oxygen Masks are
used by the United States and Foreign Military
Services throughout the world.
The HA/LP Oxygen Masks are derivatives of the
USAF MBU-20/P Oxygen Mask. HA/LP PBG
Oxygen Masks provide a bladder supply hose
that connects the mask assembly to an occipital
bladder in the helmet to provide automatic mask
tensioning during high G flight. The Non-PBG
HA/LP Oxygen Masks are direct replacements
for both MBU-12/P and MBU-5/P Masks.
Similar to the MBU-20/P, the HA/LP Oxygen
Masks provide +600 knot windblast protection.
The lightweight, low-profile mask design provides
optimal positive pressure breathing (PPB) sealing
capabilities. Separate inhalation and exhalation
valves minimize breathing resistance thus reducing
aircrew fatigue.
The masks utilize a lightweight hardshell that
may be custom-trimmed to allow optimum comfort
while maintaining appropriate fit.
FSC# 27541
Transaero, inc.
35 Melville Park Road, Suite 100
Melville, NY, USA 11747
T 631.752.1240 F 631.752.1242
transaeroinc.com
6/09
631.752.1240
transaeroinc.com
Non-PBG HA/LP Masks
P/N NSN Description
G010-1190-01 1660-01-390-1547 small narrow
G010-1190-02 1660-01-390-1543 medium narrow
G010-1190-03 1660-01-390-1544 medium wide
G010-1190-04 1660-01-390-1548 large wide
G010-1336-01 N/A extra small narrow
Parts breakdown, G010-1190-01/04 Non-PBG HA/LP Masks
P/N NSN Description
1 G010-2014-01 N/A upper strap assy
2 G030-1080-02 5965-01-469-9770 microphone assy,
M-169A/AIC, modified
3 G010-1210-01 1660-01-447-3402 exhalation valve occluder
4 G012-1034-02 3895-01-439-1315 guide, cable-upper
5 G012-1035-02 1660-01-067-7615 guide, cable-lower
6 MS3367-1-0 5975-00-984-6582 tiedown strap (not shown)
6a G012-1033-01 4730-00-943-3359 clamp, hose, 2-position
(not shown)
7 G012-9025-01 5995-01 269-5936 cord and plug assy
(CX-4707C/AIC)
8 G002-1001-01 1660-00-730-2247 connector, 3-pin
9 G010-1191-01/04 N/A facepiece, SN, MN, MW, LW
10 G010-1025-01 4720-01-440-4277 breathing hose
11 G013-1000-01 1660-01-317-0250 bayonet assy, left
12 G013-1000-02 1660-01-317-8339 bayonet assy, right
13 G010-1086-01 N/A exhalation valve assy
14 G010-1050-03 4820-01-317-5613 inhalation valve assy
15 G010-1187-21/24 N/A hardshell assy,
SN, MN, MW, LW
16 G010-1044-01 N/A non-PBG HA/LP
conversion kit with plastic
QD (optional-not shown)
17 G010-1238-05 1660-01-480-6662 hardshell assy, XSN
(not shown)
18 G010-1246-01 1660-01-480-6669 facepiece, XSN (not shown)
The silicone rubber facepiece incorporates a reflective
seal design for optimum sealing capabilities, and a
chin cup which provides injury protection during high
speed or high altitude ejection.
The extra small narrow hardshell and facepiece have
reduced height and width dimensions compared to the
existing Small Narrow MBU-20/P and HA/LP Mask.