HAM BAKER GROUP Stainless Steel Penstocks Wall Mounted Penstock Description Ham Baker Stainless Steel rectangular penstocks are designed to meet the ever changing demands of customers. The generic penstock design, which is tailored using parametrics software, develops and individualises the flood gate to suit specific duty and aperture requirements. The Fabricated Stainless Steel Series also offers greatly enhanced levels of customer service, reduced design drawing turnaround, improved reply to enquires and an enhanced delivery performance. Options ■ Size Range 400mm 2 upto 3000mm 2 Mounting ■ Wall ■ Channel ■ Side Wall ■ Weir
Transcript
HAMBAKER GROUP Stainless Steel Penstocks
Wall Mounted Penstock
DescriptionHam Baker Stainless Steel rectangular penstocks are designed to meet the ever changing demands of customers.
The generic penstock design, which is tailored using parametrics software, develops and individualises the fl ood gate to suit specifi c duty andaperture requirements.
The Fabricated Stainless Steel Series also off ers greatly enhanced levels of customer service, reduced design drawing turnaround, improved reply to enquires and an enhanced delivery performance.
Options ■ Size Range 400mm2 upto 3000mm2
Mounting ■ Wall ■ Channel ■ Side Wall ■ Weir
Ham Baker Group is a trading name of F. J. Holdings LtdCompany Registration No. 4878424ISO 14064-1
certifi edorganisation
Channel Penstock
Material SpecificationFrame
Open top and full frame versions are available. The frames are manufactured from stainless steel to BS EN 10088 : 1955 grades 1.4301 (304) or 1.4401 (316)
Door
Design for high impact whilst incorporating a lightweight single skin design with rib reinforcing manufactured in stainless steel to BS EN 10088:1955 grades 1.4301(304) or 1.4401 (316).
The number of reinforcing ribs will vary according to the specific duty and size requirements.
Sealing Faces
The sealing arrangements combine the use of resilient and or synthetic materials.
