Last Updated November
2015
Hamid Reza Ovesy Professor
OFFICE: Aerospace Engineering Department, Amirkabir University of Technology, Hafez Ave.,
#424, Tehran, Iran.
Tel: +98-21-64543215
Fax: +98-21-66959020
E-mail: [email protected]
Web site: www.aut.ac.ir/departments/aero
EDUCATION: 1998 - Cranfield University, England – PhD, Aerospace Structural Engineering.
1994 - Cranfield University, England - M.Sc. Aerospace Vehicle Design (AVD).
1988 - Tehran University, Tehran, Iran - B.Sc., Mechanical Engineering.
PROFESSIONAL EXPERIENCE:
1998, Assistant Professor, Dept. of Aerospace Eng., Amirkabir Univ. of Technology;
2005, Associate Professor, Dept. of Aerospace Eng., Amirkabir Univ. of Technology;
2009, Professor, Dept. of Aerospace Eng., Amirkabir Univ. of Technology;
2001-2003, Vice-Head of Aerospace Eng. Dept. in Educational Affairs, Amirkabir Univ. of
Technology;
2003-2004, Vice-Head of Aerospace Eng. Dept. in Research Affairs, Amirkabir Univ. of
Technology;
2004-2005, Head of Dept. of Aerospace Eng., Amirkabir Univ. of Technology;
2008-2010, Head of Structural & Flight Mechanics Group, Dept. of Aerospace Eng., Amirkabir
Univ. of Technology;
2009-2012 Head of Center of Excellence in Computational Aerospace Engineering;
2009-2013, Editorial Board Member, Journal of Composite Structures (Elsevier-ISSN:0263-8223).
2010-2014, Vice-Head of Aerospace Eng. Dept. in Educational Affairs, Amirkabir Univ. of
Technology;
Since 2000, Member IAS (Iranian Aerospace Society);
Since 2006, Establishing and Heading the Composite Material Lab, Dept. of Aerospace Eng.,
Amirkabir Univ. of Technology;
Since 2007, Board Member, Center of Excellence in Computational Aerospace Engineering;
Since 2009, Editorial Board Member, Journal of Thin-walled Structures (Elsevier-ISSN:0263-
8231);
Since 2014, Head of Structural & Flight Mechanics Group, Dept. of Aerospace Eng., Amirkabir
Univ. of Technology;
Since 2015, Editorial Board Member, Amirkabir Journal of Science and Research (Mechanical
Engineering) (AJSR-ME).
Last Updated November
2015
TAUGHT COURSES:
Undergraduate: Strength of Materials; Mechanical Vibrations; Dynamics I;
Dynamics II;
Post-graduate: Structural Stability; Finite Element Analysis; Advanced Aerospace
Structural Design; Mechanics of Composite Materials;
RESEARCH INTERESTS:
Analysis and Design of Aircraft Structures;
Linear and Non-linear Finite Strip Methods;
Delamination Buckling, Post-buckling and Growth Analysis;
Non-local Elasticity Analysis;
Parametric & Dynamic Instability Analysis of Composite Structures;
Instability and Large Deformation Analysis of Intelligent Structures;
Thermo-Mechanical Analysis of FGM;
Fluid-Structure Interaction Analysis.
KEYNOTE LECTURING:
1) Title: “Large Deflection Behaviour of Functionally Graded Plates under Pressure
Loads, Using Finite Strip Method”.
The Third European Conference on Computational Mechanics Solids, Structures and
Coupled Problems in Engineering (ECCM 2006), Lisbon, Portugal, 5–8 June 2006.
2) Title: “Parametric Instability of Laminated Composite Cylindrical Shells Containing
Delaminations”.
The Fourth International Conference on Composites: Characterization, Fabrication and
Application (CCFA-4), Iran University of Science and Technology, Tehran, Iran, 16-17
December 2014.
Last Updated November
2015
PEER-REVIEWED JOURNAL PAPERS:
77) H. R. Ovesy, E. Zia-Dehkordi, S. A. M. Ghannadpour, “High Accuracy Post-
Buckling Analysis of Moderately Thick Composite Plates Using an Exact Finite Strip”,
Computers & Structures., Available Online on October 23, 2015.
76) H. R. Ovesy, M. Naghinejad, M. Kharazi, “Delamination Growth Speed Analysis in
a Compressed Composite Laminate Based on First-Order Shear Deformation Theory”,
Journal of Composite Materials., First Published Online on April 23, 2015,
doi:10.1177/0021998315583074.
75) N. Chitsaz, H. R. Ovesy, M. Kharazi, “Buckling and Post-Buckling Analysis of
Delaminated Piezo-Composite Material Under Electro-Mechanical Loading”, Journal of
Intelligent Material Systems and Structures., First Published Online on October 26, 2015,
doi:10.1177/1045389X15610911.
74) M. Taghizadeh, H. R. Ovesy, S. A. M. Ghannadpour, “Beam Buckling Analysis by
Nonlocal Integral Elasticity Finite Element Method”, International Journal of Structural
Stability and Dynamics., 2016, Vol. 16, DOI: 10.1142/S0219455415500157.
73) S. Bahrami, H. R. Ovesy, M. Shakeri, “Dynamic Analysis of Functionally Graded
Circular Cylindrical Panel with Piezoelectric Fiber Composite Actuator and Sensor”,
Journal of Intelligent Material Systems and Structures., 2015, Vol. 26, No. 17, pp 2369-
2385.
72) H. R. Ovesy, A. Totounferoush, S. A. M. Ghannadpour, “Dynamic Buckling Analysis
of Delaminated Composite Plates Using Semi-Analytical Finite Strip Method”, Journal of
Sound and Vibration., 2015, Vol. 343, pp 131-143.
71) M. Taghizadeh, H. R. Ovesy, S. A. M. Ghannadpour, “Nonlocal Integral Elasticity
Analysis of Beam Bending by Using Finite Element Method”, Structural Engineering and
Mechanics., 2015, Vol. 54, No. 4, pp 755-769.
70) H. R. Ovesy, S. A. M. Ghannadpour, M. Nassirnia, “Post-buckling Analysis of
Rectangular Plates Comprising Functionally Graded Strips in Thermal Environments”,
Computers & Structures., 2015, Vol. 147, pp 209-215.
69) H. R. Ovesy, M. Asghari Mooneghi, M. Kharazi, “Post-Buckling Analysis of
Delaminated Composite Laminates with Multiple Through-The-Width Delaminations
Using a Novel Layerwise Theory”, Thin-Walled Structures., 2015, Vol. 94, pp 98-106.
Last Updated November
2015
68) S. A. M. Ghannadpour, H. R. Ovesy, E. Zia-Dehkordi, “Buckling and Post-Buckling
Behaviour of Moderately Thick Plates Using an Exact Finite Strip”, Computers &
Structures., 2015, Vol. 147, pp 172-180.
67) P. Khaneh Masjedi, H. R. Ovesy, “Large Deflection Analysis of Geometrically Exact
Spatial Beams under Conservative and Nonconservative Loads Using Intrinsic
Equations”, Acta Mechanica., 2015, Vol. 226, Issue 6, pp 1689-1706.
66) P. Khaneh Masjedi, H. R. Ovesy, “Chebyshev Collocation Method for Static Intrinsic
Equations Of Geometrically Exact Beams”, International Journal of Solids and
Structures., 2015, Vol. 54, pp 183-191.
65) M. R. Mahmoudabadi, H. R. Ovesy, J. Fazilati, “Dynamic Instability Analysis of
Laminated Composite Cylindrical Panels Using the First Order Shear Deformation
Layerwise Theory and Spline Finite Strip Method”, Journal of Science and Technology of
Composites (In Persian). http://jstc.iust.ac.ir, 2014, Vol. 1, pp 61-74.
64) P. Khaneh Masjedi, H. R. Ovesy, “Aeroelastic Instability of Composite Wings by the
Consideration of Different Structural Constitutive Assumptions”, Journal of Fluids and
Structures., 2014, Vol. 49, pp 303-321.
63) H. R. Ovesy, P. Khaneh Masjedi, “Investigation of the Effects of Constitutive
Equations on the Free Vibration Behavior of Single-Celled Thin-Walled Composite
Beams”, Mechanics of Advanced Materials and Structures., 2014, Vol. 21, pp 842-858.
62) M. Hajikazemi, H. R. Ovesy, H. Assaee, M. H. Sadr, “Post-Buckling Finite Strip
Analysis of Thick Functionally Graded Plates”, Structural Engineering and Mechanics.,
2014, Vol. 49, No. 5, pp 569-595.
61) S. A. M. Ghannadpour, H. R. Ovesy, E. Zia-Dehkordi, “An Exact Finite Strip for the
Calculation of Initial Post-Buckling Stiffness of Shear-Deformable Composite Laminated
Plates”, Composite Structures., 2014, Vol. 108, Issue 1, pp 504-513.
60) H. R. Ovesy, J. Fazilati, “Parametric Instability Analysis of Laminated Composite
Curved Shells Subjected to Non-Uniform In-Plane Load”, Composite Structures., 2014,
Vol. 108, Issue 1, pp 449-455.
59) M. Kharazi, H. R. Ovesy, M. Asghari Mooneghi, “Buckling Analysis of Delaminated
Composite Plates Using a Novel Layerwise Theory”, Thin-Walled Structures., 2014, Vol.
74, No. 1, pp 246-254.
58) M. H. Sherafat, H. R. Ovesy, S. A. M. Ghannadpour, “Buckling Analysis of
Functionally Graded Plates under Mechanical Loading Using Higher Order
Functionally Graded Strip”, International Journal of Structural Stability and Dynamics.,
2013, Vol. 13, No. 6.
Last Updated November
2015
57) M. H. Sherafat, S. A. M. Ghannadpour, H. R. Ovesy, “Pressure Loading, End-
Shortening and Through-Thickness Shearing Effects on Geometrically Nonlinear
Response of Composite Laminated Plates Using Higher Order Finite Strip Method”,
Structural Engineering and Mechanics., 2013, Vol. 45, No. 5, pp 677-691.
56) A. Koochi, H. Hosseini-Toudeshky, H. R. Ovesy, M. Abadyan, “Modeling The
Influence of Surface Effect on Instability of Nano-CantileveriIn Presence of Van Der
Waals Force”, International Journal of Structural Stability and Dynamics., 2013, Vol. 13,
No. 4.
55) H. R. Ovesy, S. A. M. Ghannadpour, E. Zia-Dehkordi, “Buckling Analysis of
Moderately Thick Composite Plates and Plate Structures Using an Exact Finite Strip”,
Composite Structures., 2013, Vol. 95, Issue 1, pp 697-704.
54) J. Fazilati, H. R. Ovesy, “Parametric Instability of Laminated Longitudinally
Stiffened Curved Panels with Cutout Using Higher Order FSM”, Composite Structures.,
2013, Vol. 95, Issue 1, pp 691-696.
53) H. R. Ovesy, A. Nikou, H. Shahverdi, “Flutter Analysis of High-Aspect-Ratio Wings
Based on a Third-Order Nonlinear Beam Model”, Proc IMechE Part G: J Aerospace
Engineering., 201 , Vol. 222, Issue 2, pp 0101-001
52) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “An Investigation on Buckling
Behaviour of Functionally Graded Plates Using Finite Strip Method”, Applied
Mechanics and Materials, 2012, Vols. 152-154, pp 1470-1476.
51) H. Assaee, H. R. Ovesy, M. Hajikazemi, “A Semi-Energy Finite Strip Non-Linear
Analysis of Imperfect Composite Laminates Subjected to End-Shortening”, Thin-Walled
Structures., 2012, Vol. 60, pp 46-53.
50) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “Buckling Analysis of
Functionally Graded Plates Under Thermal Loadings Using The Finite Strip Method”,
Computers & Structures., 2012, Vols. 108-109, pp 93-99.
49) H. R. Ovesy, M. Taghizadeh, M. Kharazi, “Post-Buckling Analysis of Composite
Plates Containing Embedded Delaminations with Arbitrary Shape by Using Higher
Order Shear Deformation Theory”, Composite Structures., 2012, Vol. 94, Issue 3, pp
1243-1249.
48) H. R. Ovesy, J. Fazilati, “Lay-up Effects on the Dynamic Instability of Moderately
Thick Stiffened Curved Panels”, Applied Mechanics and Materials, 2012, Vols. 152-154,
pp 1477-1482.
47) H. Assaee, M. Hajikazemi, H. R. Ovesy, “The Effect of Anisotropy on Post-Buckling
Behavior of Laminated Plates Using Semi-Energy Finite Strip Method”, Composite
Structures., 2012, Vol. 94, Issue 5, pp 1880-1885.
Last Updated November
2015
46) H. R. Ovesy, J. Fazilati, “Parametric Instability Analysis of Moderately Thick FGM
Cylindrical Panels Using FSM”, Computers & Structures., 2012, Vols. 108-109, pp 135-
143.
45) S. A. M. Ghannadpour, H. R. Ovesy, “High Accuracy Postbuckling Analysis of
Channel Section Struts”, Non-Linear Mechanics., 2012, Vol. 47, pp 968-974.
44) H. R. Ovesy, J. Fazilati, “Buckling and Free Vibration Finite Strip Analysis of
Composite Plates with Cutout Based on Two Different Modeling Approaches”,
Composite Structures., 2012, Vol. 94, Issue 3, pp 1250-1258.
43) H. R. Ovesy, M. Hajikazemi, H. Assaee, “A Novel Semi Energy Finite Strip Method
for Post-Buckling Analysis of Relatively Thick Anti-Symmetric Laminated Plates”,
Advances in Engineering Software., 2012, Vol. 48, Issue 1, pp 32-39.
42) J. Fazilati, H. R. Ovesy, “Finite Strip Dynamic Instability Analysis of Perforated
Cylindrical Shell Panels”, Composite Structures., 2012, Vol. 94, Issue 3, pp 1259-1264.
41) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “High Accuracy Postbuckling
Analysis of Box Section Struts”, Applied Mathematics and Mechanics (ZAMM)., 2012,
Vol. 92, No. 8, pp 668-680.
40) H. R. Ovesy, M. Kharazi, “Stability Analysis of Composite Plates with Through-the-
Width Delamination”, Engineering Mechanics (ASCE)., 2011, Vol. 137, No. 2, pp 87-
100.
39) H. R. Ovesy, M. H. Sadr, M. Hajikazemi, H. Assaee, “Large Deflection Behavior of
Composite Laminated Plates Under End-Shortening and Normal Pressure Loading
Using a Semi-Energy Finite Strip Method”, Key Engineering Materials., 2011, Vols. 471-
472, pp 423-437.
38) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “Nonlinear Post Buckling
Analysis of Isotropic Plates Using Finite Strip Methods”, Journal of Aerospace Science
and Technology (JAST), 2011, Vol. 8, No. 1, pp 11-19.
37) M. Nassirnia, H. R. Ovesy, S. A. M. Ghannadpour, “Thermal Buckling Analysis of
Moderately Thick Plates Using Functionally Graded Strips”, Key Engineering Materials.,
2011, Vols. 471-472, pp 757-762.
36) H. R. Ovesy, H. Assaee, M. Hajikazemi, “Post-Buckling of Thick Symmetric
Laminated Plates Under End-Shortening and Normal Pressure Using Semi-Energy Finite
Strip Method”, Computers & Structures., 2011, Vol. 89, Issue 9-10, pp 724-732.
Last Updated November
2015
35) S. A. M. Ghannadpour, H. R. Ovesy, M. Hajikazemi, “An Investigation on Relative
Post-Buckling Stiffness Variations of Symmetrically Cross-Ply Laminates”, Key
Engineering Materials., 2011, Vols. 471-472, pp 1022-1027.
34) H. R. Ovesy, S. A. M. Ghannadpour, “An Exact Finite Strip For The Initial
Postbuckling Analysis of Channel Section Struts”, Computers & Structures., 2011, Vol.
89, Issue 19-20, pp 1785-1796.
33) J. Fazilati, H. R. Ovesy, “Boundary Condition Effects on the Parametric Stability of
Moderately Thick Laminated Cylindrical Panels”, Key Engineering Materials., 2011,
Vols. 471-472, pp 466-471.
32) H. R. Ovesy, M. Kharazi, “Compressional Stability Behavior of Composite Plates
with Through-the-Width and Embedded Delaminations by Using First Order Shear
Deformation Theory”, Computers & Structures., 2011, Vol. 89, Issue 19-20, pp 1829-
1139.
31) M. Hajikazemi, H. R. Ovesy, M. H. Sadr, “A Semi- Energy Finite Strip Method for
Post-Buckling Analysis of Relatively Thick Anti-Symmetric Cross-Ply Laminates”, Key
Engineering Materials., 2011, Vols. 471-472, pp 426-431.
30) S. A. M. Ghannadpour, H. R. Ovesy, “Relative Post-buckling Stiffness Calculation of
Symmetrically Laminated Composite Plates Using An Exact Finite Strip”, Advanced
Materials Research., 2010, Vols. 123-125, pp 201-204.
29) H. R. Ovesy, M. Kharazi, M. Taghizadeh, “Semi-Analytical Buckling Analysis of
Clamped Composite Plates Containing Embedded Rectangular And Circular
Delaminations”, Mechanics of Advanced Materials and Structures., 2010, Vol. 17, Issue
5, pp 343-352.
28) M. Kharazi, H. R. Ovesy, “Large Deflection Compressional Analysis of
Unsymmetric Delaminated Composite Plates with Consideration of Contact
Phenomenon”, Applied Composite Materials., 2010, Vol. 17, Issue 5, pp 515-528.
27) J. Fazilati, H. R. Ovesy, “Dynamic Instability Analysis of Composite Laminated
Thin-Walled Structures Using Two Versions of FSM”, Composite Structures., 2010, Vol.
92, Issue 9, pp 2060-2065.
26) H. R. Ovesy, S. A. M. Ghannadpour, M. H. Sherafat, “Buckling Analysis of
Laminated Composite Plates Using Higher-order Semi–analytical Finite Strip Method”,
Applied Composite Materials., 2010, Vol. 17, Issue 2, pp 69-80.
25) M. Kharazi, H. R. Ovesy, M. Taghizadeh, “Buckling of The Composite Laminates
Containing Through-The-Width Delaminations Using Different Plate Theories”,
Composite Structures., 2010, Vol. 92, No. 5, pp 1176-1183.
Last Updated November
2015
24) H. R. Ovesy, J. Loughlan, S. A. M. Ghannadpour, “An Investigation on the Post-
local-buckling Analysis of I-section Struts using Finite Strip Method”, Advanced Steel
Construction., 2010, Vol. 6, No. 1, pp 662-677.
23) M. Kharazi, H. R. Ovesy, “Buckling of Laminates with Multiple Through-the-Width
Delaminations by Using Spring Simulation Model”, Amirkabir International Journal of
Modeling, Identification,Simulation & Control., 2010, Vol. 42, No. 2, pp 17-25.
22) S. A. M. Ghannadpour, H. R. Ovesy, “Exact Postbuckling Stiffness Calculation of
Box Section Struts”, Engineering Computations, Int. J. for Computer Aided Engineering
and Software., 2009, Vol. 26, Issue 7, pp 868-893.
21) H. R. Ovesy, S. A. M. Ghannadpour, “An Exact Finite Strip for the Calculation of
Relative Post-Buckling Stiffness of Isotropic Plates”, Structural Engineering and
Mechanics., 2009, Vol. 31, No. 2, pp 181-210.
20) S. A. M. Ghannadpour, H. R. Ovesy, “The Application of an Exact Finite Strip to the
Buckling of Symmetrically Laminated Composite Rectangular Plates and Prismatic Plate
Structures”, Composite Structures., 2009, Vol. 89, pp 151-158.
19) H. R. Ovesy, J. Fazilati, “Stability Analysis of Composite Laminated Plate and
Cylindrical Shell Structures Using Semi-Analytical Finite Strip Method”, Composite
Structures., 2009, Vol. 89, pp 467-474.
18) H. R. Ovesy, H. Assaee, “Semi-Energy Finite Strip Post-Buckling Analysis of
Laminated plates Concerning the Effects of Mechanical Coupling”, Composite
Structures., 2009, Vol. 89, pp 120-125.
17) M. Kharazi, H. R. Ovesy, “Compressional Stability Behavior of Composite Plates
with Multiple Through-the-Width Delaminations”, Journal of Aerospace Science and
Technology (JAST), 2008, Vol. 5, No. 1, pp 13-22.
16) S. A. M. Ghannadpour, H. R. Ovesy, “An Exact Finite Strip for the Calculation of
Relative Post-Buckling Stiffness of I-section Struts”, International Journal of Mechanical
Sciences., 2008, Vol. 50, pp 1354-1364.
15) M. Kharazi, H. R. Ovesy, “Postbuckling Behavior of Composite Plates with
Through-the-Width Delaminations”, Thin-Walled Structures., 2008, Vol. 46, pp 939-946.
14) H. R. Ovesy, H. Assaee, “The Effects of Bend-Twist Coupling on the Post-Buckling
Characteristics of Composite Laminated Plates Using Semi-Energy Finite Strip
Approach”, Thin-Walled Structures., 2007, Vol. 45, pp 209-220.
13) H. R. Ovesy, S. A. M. Ghannadpour, “Large Deflection Finite Strip Analysis of
Functionally Graded Plates Under Pressure Loads”, International Journal of Structural
Stability and Dynamics., 2007, Vol. 7, No. 2, pp 1-19.
Last Updated November
2015
12) H. Assaee, H. R. Ovesy, “A Multi-term Semi-energy Finite Strip Method for Post-
buckling Analysis of Composite Plates”, International Journal of Numerical Methods in
Engineering., 2007, Vol. 70, Issue 11, pp 1303-1323.
11) H. Hosseini-Toudeshky, B. Mohammadi, B. Hamidi, H. R. Ovesy, “Analysis of
Composite Skin/Stiffener Debounding and Failure under Uniaxial Loading”, Composite
Structures., 2006, Vol. 75, pp 428-436.
10) H. R. Ovesy, J. Loughlan, S. A. M. Ghannadpour, G. Morada, “Geometric Non-
linear Analysis of Box Sections Under End Shortening, Using Three Different Versions of
the Finite Strip Method”, Thin-Walled Structures., 2006, Vol. 44, pp 623-637.
9) H. R. Ovesy , S. A. M. Ghannadpour, “Geometric Nonlinear Analysis of Imperfect
Composite Laminated Plates, Under End Shortening and Pressure loading, Using Finite
Strip Method”, Composite Structures., 2006, Vol. 75, pp 100-105.
8) H. R. Ovesy , S. A. M. Ghannadpour, G. Morada, “Post-buckling Behavior of
Composite Laminated Plates Under End Shortening and Pressure Loading, Using Two
Versions of Finite Strip Method”, Composite Structures., 2006, Vol. 75, pp 106-113
7) H. R. Ovesy, J. Loughlan, S. A. M. Ghannadpour, “Geometric Non-Linear Analysis of
Channel Sections Under End Shortening, Using Different Versions of the Finite Strip
Method”, Computers & Structures., 2006, Vol. 84, pp 855-872.
6) H. R. Ovesy, H. Assaee, “An Investigation on the Post-Buckling Behavior of
Symmetric Cross-Ply Laminated Plates Using a Semi-Energy Finite Strip Approach”,
Composite Structures., 2005, Vol. 71, pp 365-370.
5) H. R. Ovesy , S. A. M. Ghannadpour, G. Morada, “Geometric Nonlinear Analysis of
Composite Laminated Plates with Initial Imperfection Under End Shortening, Using Two
Versions of Finite Strip Method”, Composite Structures., 2005, Vol. 71, pp 307-314.
4) H. Hosseini-Toudeshky, H. R. Ovesy and M. Kharazi, “The Development of an
Approximate Method for the Design of Bead-Stiffened Composite Panels”, Thin-Walled
Structures., 2005, Vol. 43, pp 1663-1676.
3) H. R. Ovesy, J. Loughlan, S. A. M. Ghannadpour, “Geometric Non-Linear Analysis of
Thin Flat Plates Under End Shortening, Using Different Versions of Finite Strip
Method”, International Journal of Mechanical Sciences., 2005, Vol. 47, pp 1923-1948.
2) H. R. Ovesy, H. Assaee, “Finite Strip Buckling Analysis of Some Composite Stiffened
Box Sections”, AIAA Journal., 2004, Vol. 42, pp 2382-2384.
1) H. R. Ovesy, J. Loughlan, H. Assaee, “The Compressive Post-Local Buckling
Behavior of Thin Plates Using a Semi-Energy Finite Strip Approach”, Thin-Walled
Structures., 2004, Vol. 42, pp 449–474.
Last Updated November
2015
PEER-REVIEWED CONFERENCE PAPERS:
125) F. Nikrad, H. R. Ovesy, M. Kharazi, “Post-Buckling Analysis of Laminated
Composite Beam-Columns Containing Delaminations”, Proceedings (In Persian) of the
23rd
Annual International Conference on Mechanical Engineering (ISME-2015),
Amirkabir University of Technology, Tehran, Iran, (12-14 May 2015).
124) A. Hadi, H. R. Ovesy, S. Shakhesi, J. Fazilati, “Investigation of the Effects of
Inertia and Different Shell Theories on the Vibration Characteristics of Cylindrical
Shells”, Proceedings of the 23rd
Annual International Conference on Mechanical
Engineering (ISME-2015), Amirkabir University of Technology, Tehran, Iran, (12-14
May 2015).
123) A. Hadi, H. R. Ovesy, S. Shakhesi, J. Fazilati, “The Effects of Kinematic Relations
and Inertia on Free Vibration of Cylindrical Shells”, Proceedings of the 14th
Iranian
Aerospace Society Conference, Iranian Research Organization for Science and
Technology, Tehran, Iran, (2-4 March 2015).
122) S. Rabet, H. R. Ovesy, “Molecular Dynamics Simulation of Graphene Tension
Buckling”, Proceedings of the 4th
International Congress on Transportation Coatings,
Amirkabir University of Technology, Tehran, Iran, (17-18 Dec. 2014).
121) M. R. Mahmoudabadi, H. R. Ovesy, J. Fazilati, “Finite Strip Dynamic Instability
Analysis of Thick Laminated Composite Plates by Using First Order Layerwise Theory”,
Proceedings (In Persian) of the Fourth International Conference on Acoustics and
Vibration (ISAV 2014), Iran University of Science and Technology, Tehran, Iran, (10-11
December 2014).
120) A. Totounferoush, H. R. Ovesy, S. A. M. Ghannadpour, “Nonlinear Dynamic
Buckling Response Analysis of Piezo-Composite Plates Subjected to In-Plane Loads”,
Proceedings of the Fourth International Conference on Acoustics and Vibration (ISAV
2014), Iran University of Science and Technology, Tehran, Iran, (10-11 December 2014).
119) M. Latifi, M. Kharazi, H. R. Ovesy, “Nonlinear Vibration of Composite Beams
under Combined In-Plane and Lateral Loadings using Partial Layerwise Theory”,
Proceedings of the Fourth International Conference on Composites: Characterization,
Fabrication and Application (CCFA-4), Tehran, Iran, (16-17 December 2014).
118) M. Naghinejad, H. R. Ovesy, M. Kharazi, “Dynamic Delamination Growth Analysis
in Buckled Composite Laminates Using Variational Principle”, Proceedings of the Fourth
International Conference on Composites: Characterization, Fabrication and Application
(CCFA-4), Tehran, Iran, (16-17 December 2014).
Last Updated November
2015
117) H. R. Ovesy, J. Fazilati, M. R. Mahmoudabadi, “Finite Strip Buckling and Free
Vibration Analysis of Laminated Composite Plates Containing Delamination Using a
First Order Layerwise Theory”, Proceedings of the Twelfth International Conference on
Computational Structures Technology, B.H.V. Topping, P. Ivanyi (Editors), Civil-Comp
Press, Naples, Italy, (2-5 September 2014).
116) H. R. Ovesy, E. Zia-Dehkordi, S. A. M. Ghannadpour, “Buckling and Post-
Buckling Behaviour of Shear-Deformable Composite Laminated Plates using an Exact
Finite Strip Method”, Proceedings of the Twelfth International Conference on
Computational Structures Technology, B.H.V. Topping, P. Ivanyi (Editors), Civil-Comp
Press, Naples, Italy, (2-5 September 2014).
115) E. Amini, A. A. Asgharian Jeddi, H. R. Ovesy, H. Dabiryan, “The Effects of Fabric
Structure (Reinforcements Components) on the Buckling Behavior of Laminated
Composites with Delamination Under Compressive Load”, Proceedings (In Persian) of
the 9th National Textile Engineering Conference, Tehran, Iran, (6-8 May 2014).
114) N. Chitsaz, H. R. Ovesy, M. Kharazi, “Post-Buckling Analysis of Piezo-Composite
Laminate With Through-The-Width Delamination Based On Layerwise Theory”,
Proceedings of the 16th European Conference On Composite Materials (ECCM-16),
Seville, Spain, (22-26 June 2014).
113) E. Amini, A. A. Asgharian Jeddi, H. R. Ovesy, H. Dabiryan, “Influence of Fabric
Weave Pattern on Buckling Behavior of Fabric Reinforced Composite Plates with
Through the Width Delamination”, Proceedings of the 16th European Conference On
Composite Materials (ECCM-16), Seville, Spain, (22-26 June 2014).
112) M. R. Mahmoudabadi, H. R. Ovesy, J. Fazilati, “Free Vibration Analysis of Thick
Laminated Composite Plates by Using Finite Strip Method and with the Application of
First-Order Layerwise Theory”, Proceedings of the 13th
Iranian Aerospace Society
Conference , University of Tehran, Tehran, Iran, (3-5 March 2014).
111) H. Assaee, M. Hajikazemi, H. R. Ovesy, “Semi-Energy Finite Strip Nonlinear Post-
Buckling Analysis of Composite Laminated Plates under Non-uniform Compression”,
Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM
2013), McGill University, Montreal, Canada, (23-26 July 2013).
110) H. R. Ovesy, J. Fazilati, “Parametric Instability Analysis of Laminated Flat and
Cylindrical Panels Subjected to Non-Uniform In-Plane Loads”, Proceedings of the
Seventeenth International Conference on Composite Structures (ICCS 17), University of
Porto, Porto, Portugal, (17-21 June 2013).
109) M. Taghizadeh, H. R. Ovesy, S. A. M. Ghannadpour, “Finite Element Bending
Analysis of Nanoplates Based on Nonlocal Integral Elasticity”, Proceedings of the
Seventeenth International Conference on Composite Structures (ICCS 17), University of
Porto, Porto, Portugal, (17-21 June 2013).
Last Updated November
2015
108) H. R. Ovesy, S. A. M. Ghannadpour, A. Totounferoush, “Dynamic Buckling
Analysis of Delaminated Composite Plates with Piezoelectric Layers Subjected to
Electro-Mechanical Loads”, Proceedings of the Seventeenth International Conference on
Composite Structures (ICCS 17), University of Porto, Porto, Portugal, (17-21 June 2013).
107) S. A. M. Ghannadpour, H. R. Ovesy, E. Zia-Dehkordi, “An Exact Finite Strip for
the Calculation of Relative Post-Buckling Stiffness of Thick Composite Plates”,
Proceedings of the Seventeenth International Conference on Composite Structures (ICCS
17), University of Porto, Porto, Portugal, (17-21 June 2013).
106) H. R. Ovesy, H. Shirmohammadali, J. Fazilati, “Buckling Analysis of Thin
Perforated Composite Panel by Using Spline Finite Strip Method”, Proceedings (In
Persian) of the 12th
Conference of Iranian Aerospace Society (Aero 2013), Amirkabir
University of Technology, Iran, (20-22 Feb 2013).
105) M. Taherzadeh Esfahani, M. Z. Kabir, H. R. Ovesy, “Local Buckling of Initially
Delaminated Composite Columns, Using First Order Shear Deformation Theory”,
Proceedings of the Third International Conference on Composites: Characterization,
Fabrication and Application (CCFA-3), Tehran, Iran, (18-19 December 2012).
104) N. Kharghani, M. Kharazi, H. R. Ovesy, “Prediction of the Initiation of Multiple
Through-the-Width Delaminations Propagation in Cross Ply Composite Laminates Using
Layerwise Theory”, Proceedings of the Third International Conference on Composites:
Characterization, Fabrication and Application (CCFA-3), Tehran, Iran, (18-19 December
2012).
103) H. R. Ovesy, M. Naghinejad, “The Layup Configuration Effects on the Post
Buckling and Delamination Growth Characteristic of Composite Plates”, Proceedings of
the Third International Conference on Composites: Characterization, Fabrication and
Application (CCFA-3), Tehran, Iran, (18-19 December 2012).
102) H. R. Ovesy, S. A. M. Ghannadpour, M. Nassirnia, “Thermal Postbuckling
Behaviour of Rectangular Functionally Grade Plate Using Finite Strip Method”,
Proceedings of the Eleventh International Conference on Computational Structures
Technology, B.H.V. Topping (Editor), Civil-Comp Press, Dubrovnik, Croatia, (4-7
September 2012).
Last Updated November
2015
101) S. A. M. Ghannadpour, H. R. Ovesy, E. Zia-Dehkordi, “Calculation of Initial Post-
Buckling Behavior of Moderately Thick Plates Using an Exact Finite Strip”, Proceedings
of the Eleventh International Conference on Computational Structures Technology,
B.H.V. Topping (Editor), Civil-Comp Press, Dubrovnik, Croatia, (4-7 September 2012).
100) M. Taghizadeh, H. R. Ovesy, M. Kharazi, “Semi-Analytical Post-Buckling Analysis
of Composite Plates Containing Free Edge Embedded Delaminations by Using Higher
Order Shear Deformation Theory”, Proceedings of the 8th European Solid Mechanics
Conference (ESMC 2012), Graz University of Technology, Graz, Austria, (9-13 July
2012).
99) J. Fazilati, H. R. Ovesy, “Parametric Instability of Laminated Longitudinally
Stiffened Curved Panels with Cutout Using Higher Order FSM”, Proceedings of the
International Conference on Mechanics of Nano, Micro and Macro Composite Structures
(ICNMMCS), Politecnico di Torino, Torino, Italy, (18-20 June 2012).
98) M. Kharazi, N. Kharghani, H. R. Ovesy, “Prediction of The Initiation of
Delamination Propagation in Composite Laminates Using Layerwise FSDT For
Unsymmetric Lay-Up Sequences”, Proceedings of the International Conference on
Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Politecnico di
Torino, Torino, Italy, (18-20 June 2012).
97) H. R. Ovesy, S. A. M. Ghannadpour, E. Zia-Dehkordi, “Buckling Analysis of
Moderately Thick Composite Plates and Plate Structures Using an Exact Finite Strip”,
Proceedings of the International Conference on Mechanics of Nano, Micro and Macro
Composite Structures (ICNMMCS), Politecnico di Torino, Torino, Italy, (18-20 June
2012).
96) M. H. Sherafat, H. R. Ovesy, S.A.M. Ghannadpour, “Buckling Analysis of
Functionally Graded Plates (FGPs) under Mechanical Loading Using Higher Order
Functionally Graded Strip (FGS)”, Proceedings of the Fourth International Conference
on Structural Stability and Dynamics (ICSSD 2012), Jaipur, India, (4-6 January 2012).
95) M. H. Sherafat, S.A.M. Ghannadpour, H. R. Ovesy, “Through- Thickness Shearing
Effects on Post-Buckling Behavior of Composite Laminated Plates under End Shortening
and Pressure Loading, Using Finite Strip Method”, Proceedings of the Fourth
International Conference on Structural Stability and Dynamics (ICSSD 2012), Jaipur,
India, (4-6 January 2012).
94) A. Nikou, H. R. Ovesy, “Evaluation of a Set of Nonlinear Dynamic Equations of
Inextensional Beams with Application in Modeling High Aspect-Ratio Wings”,
Proceedings of the First International Conference on Acoustics and Vibration (ISAV
2011), Amirkabir University of Technology, Tehran, Iran, (20-21 December 2011).
Last Updated November
2015
93) H. R. Ovesy, M. Taghizadeh, M. Kharazi, “Post-Buckling Analysis of Composite
Plates Containing Embedded Delaminations with Arbitrary Shape by Using Higher
Order Shear Deformation Theory”, Proceedings of the Sixteenth International
Conference on Composite Structures (ICCS 16), University of Porto, Porto, Portugal,
(28-30 June 2011).
92) H. Assaee, M. Hajikazemi, H. R. Ovesy, “The Effect of Anisotropy on Post-Buckling
Behavior of Laminated Plates Using Semi-Energy Finite Strip Method”, Proceedings of
the Sixteenth International Conference on Composite Structures (ICCS 16), University of
Porto, Porto, Portugal, (28-30 June 2011).
91) J. Fazilati, H. R. Ovesy, “Finite Strip Dynamic Instability Analysis of Perforated
Cylindrical Shell Panels”, Proceedings of the Sixteenth International Conference on
Composite Structures (ICCS 16), University of Porto, Porto, Portugal, (28-30 June 2011).
90) H. R. Ovesy, J. Fazilati, “Buckling and Free Vibration Finite Strip Analysis of
Composite Plates with Cutout Based on Two Different Modeling Approaches”,
Proceedings of the Sixteenth International Conference on Composite Structures (ICCS
16), University of Porto, Porto, Portugal, (28-30 June 2011).
89) M. Hajikazemi, H. R. Ovesy, M. H. Sadr, “A Semi-Energy Finite Strip Method for
Post-Buckling Analysis of Relatively Thick Anti-Symmetric Cross-Ply Laminates”,
Proceedings of the Eight International Conference on Composite Science & Technology
(ICCST/8), Kuala Lumpur, Malaysia, (22-24 March 2011).
88) H. R. Ovesy, M. H. Sadr, M. Hajikazemi, H. Assaee, “Large Deflection Behaivior of
Composite Laminated Plates Under End-shortening and Normal Pressure Loading Using
a Semi-Energy Finite Strip Method”, Proceedings of the Eight International Conference
on Composite Science & Technology (ICCST/8), Kuala Lumpur, Malaysia, (22-24
March 2011).
87) M. Javadiyeh, H. R. Ovesy, “Lay-up configuration effects on the transient response
of laminated composite plates by finite strip method”, Proceedings of the 9th
Iranian
Aerospace Society Conference , Islamic Azad University, Science and Research Branch,
Tehran, Iran, (8-10 Feb. 2010).
86) A. Hadi, H. R. Ovesy, “Investigation of Torsional Behavior of Thin-Walled Glass-
Epoxy Composite Box Beams in Helicopter Main Rotor Blade Application”, Proceedings
of the 9th
Iranian Aerospace Society Conference , Islamic Azad University, Science and
Research Branch, Tehran, Iran, (8-10 Feb. 2010).
85) H. Assaee, H. R. Ovesy, M. Hajikazemi, M.H. Sadr, “Post-Buckling Behavior of
Thin and Relatively Thick Symmetric Laminated Plates Under End-Shortening and
Normal Pressure Loading Using Semi Energy Finite Strip Method”, Proceedings of the
Fourth European Conference on Computational Mechanics Solids, Structures and
Coupled Problems in Engineering (ECCM 2010), Paris, France, (16-21 May 2010).
Last Updated November
2015
84) H. R. Ovesy, P. Khaneh Masjedi, “Free Vibration of Torsion-Bending Coupled Thin-
walled Composite Beams”, Proceedings of the Fourth European Conference on
Computational Mechanics Solids, Structures and Coupled Problems in Engineering
(ECCM 2010), Paris, France, (16-21 May 2010).
83) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “Thermal Buckling Analysis of
Functionally Graded Plates using the Finite Strip Method”, Proceedings of the Tenth
International Conference on Computational Structures Technology, B.H.V. Topping,
J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero (Editors), Civil-Comp Press,
Valencia, Spain, (14-17 September 2010).
82) H. Assaee, H. R. Ovesy, M. Hajikazemi, M.H. Sadr Lahidjani, “The Effects of Aspect
Ratio on Postbuckling Behavior of Rectangular Plates of Functionally Graded
Materials”, Proceedings of the Tenth International Conference on Computational
Structures Technology, B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L.
Romero (Editors), Civil-Comp Press, Valencia, Spain, (14-17 September 2010).
81) H. R. Ovesy, J. Fazilati, “Dynamic Stability of Functionally Graded Material
Cylindrical Shells Based on Higher-Order Theory Using the Finite Strip Method”,
Proceedings of the Tenth International Conference on Computational Structures
Technology, B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero
(Editors), Civil-Comp Press, Valencia, Spain, (14-17 September 2010).
80) H. R. Ovesy, M. Hajikazemi, H. Assaee, “A Semi Energy Finite Strip Method for
Post-Buckling Analysis of Relatively Thick Laminates”, Proceedings of the Tenth
International Conference on Computational Structures Technology, B.H.V. Topping,
J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero (Editors), Civil-Comp Press,
Valencia, Spain, (14-17 September 2010).
79) H. R. Ovesy, M. Kharazi, M. Taghizadeh, “Post-Buckling Analysis of Composite
Plates Containing Embedded Delaminations by using Higher Order Shear Deformation
Theory”, Proceedings of the Tenth International Conference on Computational Structures
Technology, B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero
(Editors), Civil-Comp Press, Valencia, Spain, (14-17 September 2010).
78) M. Kharazi, M. Taghizadeh, H. R. Ovesy, “Compressional Stability Analysis of
Composite Plates with Multiple Through-the-Width Delaminations by using Higher
Order Shear Deformation Theory”, Proceedings of the Tenth International Conference on
Computational Structures Technology, B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru
and M.L. Romero (Editors), Civil-Comp Press, Valencia, Spain, (14-17 September 2010).
Last Updated November
2015
77) S. A. M. Ghannadpour, H. R. Ovesy, M. Nassirnia, “High Accuracy Post-buckling
Analysis of Box Section Struts using Three Different Versions of Finite Strip Method”,
Proceedings of the Tenth International Conference on Computational Structures
Technology, B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero
(Editors), Civil-Comp Press, Valencia, Spain, (14-17 September 2010).
76) H. R. Ovesy, S. A. M. Ghannadpour, M. Nassirnia, “Buckling Analysis of Moderately
Thick FGM Plates using the Finite Strip Method”, Proceedings of the Second
International Conference on Composites: Characterization, Fabrication and Application
(CCFA-2), Kish Island, Iran, (27-30 December 2010).
75) H. R. Ovesy, M. Kharazi, M. Asghari Mooneghi, “Buckling Analysis of Composite
Laminates with Through-The-Width Delamination Using a Novel Layerwise Theory”,
Proceedings of the Second International Conference on Composites: Characterization,
Fabrication and Application (CCFA-2), Kish Island, Iran, (27-30 December 2010).
74) H. R. Ovesy, H. Assaee, M. Hajikazemi, “An Investigation on Post Buckling
Behavior of Functionally Graded Plate Using A Semi Energy Finite Strip Approach”,
Proceedings of the IJSSD Symposium on Progress in Structural Stability and Dynamics,
Hong Kong, China, (16-18 December 2009).
73) H. R. Ovesy, S.A.M. Ghannadpour, M. Nassirnia, “High Accuracy Postbuckling
Analysis of Some Isotropic Plates Using Two Different Versions of Finite Strip Method”,
Proceedings of the IJSSD Symposium on Progress in Structural Stability and Dynamics,
Hong Kong, China, (16-18 December 2009).
72) J. Fazilati, H. R. Ovesy, “Dynamic Stability of Laminated Cylindrical Shells Based
on A Higher-Order Shear Deformation Theory Using FSM”, Proceedings of the IJSSD
Symposium on Progress in Structural Stability and Dynamics, Hong Kong, China, (16-18
December 2009).
71) J. Fazilati, H. R. Ovesy, “Prediction of The Dynamic Behavior of Functionally
Graded Thin Cylindrical Shells Using Finite Strip Method”, Proceedings of the 17th
Annual Conference (International) of Mechanical Engineering (ISME 2009), Tehran
University, Iran,( May 2009).
70) J. Fazilati, H. R. Ovesy, “Dynamic Instability Analysis of Composite Laminated
Thin-Walled Structures Using Two Versions Of Fsm”, Proceedings of the Fifteenth
International Conference on Composite Structures (ICCS/15), University of Porto, Porto,
Portugal, (15-17 June 2009).
69) M. Kharazi, H. R. Ovesy, M. Taghizadeh, “Buckling of The Composite Laminates
Containing Through-The-Width Delaminations Using Different Plate Theories”,
Proceedings of the Fifteenth International Conference on Composite Structures
(ICCS/15), University of Porto, Porto, Portugal, (15-17 June 2009).
Last Updated November
2015
68) H. R. Ovesy, M. Kharazi, M. Taghizadeh, “The Effects of The Bend-Twist Coupling
Terms On The Buckling Behavior Of The Composite Laminates Containing Embedded
Delaminations”, Proceedings of the Fifteenth International Conference on Composite
Structures (ICCS/15), University of Porto, Porto, Portugal, (15-17 June 2009).
67) S. G. Mousavi, H. R. Ovesy, “Effects of Nonlinearity on the Flutter Speed of High
Aspect Ratio Wings”, Proceedings of the 8th
Iranian Aerospace Society Conference
(International), Isfahan Malek-e-Ashtar University of Technology, Iran, (17-19 Feb
2009).
66) P. Khaneh Masjedi, H. R. Ovesy, “Free Vibrations of Aircraft Wings Modeled as
Thin-walled Composite Beam”, Proceedings of the 8th
Iranian Aerospace Society
Conference (International), Isfahan Malek-e-Ashtar University of Technology, Iran, (17-
19 Feb 2009).
65) H. R. Ovesy, M. H. Sherafat, S. A. M. Ghannadpour, “Higher Order Semi –
Analytical Finite Strip Post Buckling Analysis of Laminated Composite Plates”,
Proceedings of the Seventh International Conference on Composite Science &
Technology (ICCST/7), The American University of Sharjah, UAE, (20-22 Jan. 2009).
64) M. Kharazi, H. R. Ovesy, “Large Deflection Compressional Analysis of
Unsymmetric Delaminated Composite Plates with Consideration of Contact
Phenomenon”, Proceedings of the Seventh International Conference on Composite
Science & Technology (ICCST/7), The American University of Sharjah, UAE, (20-22
Jan. 2009).
63) J. Fazilati, H. R. Ovesy, “Dynamic Instability Analysis of Composite Laminated
Plate and Cylindrical Shell Structures Using Semi-Analytical Finite Strip Method”,
Proceedings of the Seventh International Conference on Composite Science &
Technology (ICCST/7), The American University of Sharjah, UAE, ( 20-22 Jan. 2009).
62) H. Assaee, H. R. Ovesy, “Semi-Energy Finite Strip Post-buckling Analysis of Anti-
symmetric Cross-ply Laminated plates Concerning the Effects of Mechanical Coupling”,
Proceedings of The Fifth International Conference on Thin-Walled Structures, Brisbane,
Australia, (18-20 June 2008).
61) J. Fazilati, H. R. Ovesy, “Using Finite Strip Method to Predict Dynamic Instability
Regions (DIR) for Thin-Walled Flat Composite Plates”, Proceedings of the First
International Conference on Composites: Characterization, Fabrication and Application
(CCFA-1), Kish Island, Iran, (15-18 December 2008).
60) M. Kharazi, H. R. Ovesy, “Compressional Stability Behavior of Composite Plates
with Embedded Delaminations by Using Classical Laminate Plate Theory”, Proceedings
of the First International Conference on Composites: Characterization, Fabrication and
Application (CCFA-1), Kish Island, Iran, (15-18 December 2008).
Last Updated November
2015
59) H. R. Ovesy, S. A. M. Ghannadpour, M. H. Sherafat, “Buckling Analysis of
Laminated Composite Plates Using Higher Order Semi – Analytical Finite Strip
Method”, Proceedings of the First International Conference on Composites:
Characterization, Fabrication and Application (CCFA-1), Kish Island, Iran, (15-18
December 2008).
58) S. A. M. Ghannadpour, M. Hajikazemi, H. R. Ovesy, “Large Deflection Behavior of
Functionally Graded Plates under Pressure Loads Using First-order Shear Deformation
Theory”, Proceedings of the First International Conference on Composites:
Characterization, Fabrication and Application (CCFA-1), Kish Island, Iran, (15-18
December 2008).
57) A. M. Sohrabi, H. R. Ovesy, G. Morada, “Post Buckling Analysis of Thick
Rectangular Laminates By Using Higher Order Shear Deformable Spline Finite Strip
Method”, Proceedings of the 16th
Annual Conference (International) of Mechanical
Engineering (ISME 2008), Shahid Bahonar University of Kerman, Iran, (May 2008).
56) H. R. Ovesy, S. A. M. Ghannadpour, “The Application of an Exact Finite Strip for
Calculation of Initial Post-buckling Stiffness of Channel Section Struts”, Proceedings of
the Ninth International Conference on Computational Structures Technology, B.H.V.
Topping and M. Papadrakakis (Editors), Civil-Comp Press, Athens, Greece, (2-5
September 2008).
55) H. R. Ovesy, M. Kharazi, “Compressional Stability Behavior of Composite Plates
with Multiple Through-the-Width Delaminations by Using First Order Shear
Deformation Theory”, Proceedings of the Ninth International Conference on
Computational Structures Technology, B.H.V. Topping and M. Papadrakakis (Editors),
Civil-Comp Press, Athens, Greece, (2-5 September 2008).
54) M. Kharazi, H. R. Ovesy, “Compressional Stability Behavior of Composite Plates
with Multiple Through-the-Width Delaminations”, Proceedings of the 7th
Iranian
Aerospace Society Conference (International), Sharif University of Technology, Iran,
(19-21 Feb 2008).
53) A. M. Sohrabi, H. R. Ovesy, “Free Vibration of Thick Plates Using Higher Order
Finite Strip”, Proceedings of the 7th
Iranian Aerospace Society Conference
(International), Sharif University of Technology, Iran, (19-21 Feb 2008).
52) J. Fazilati, H. R. Ovesy, “Free Vibration Analysis of Composite Laminated Thin-
walled Cylindrical Shells Using Semi-Analytical Finite Strip Method”, Proceedings (in
Persian) of the 7th
Iranian Aerospace Society Conference (International), Sharif
University of Technology, Iran, (19-21 Feb 2008).
Last Updated November
2015
51) H. R. Ovesy, A. M. Sohrabi, “Spline FSM Buckling Analysis of Higher Order Shear
Deformable Rectangular Laminates”, Proceedings of Third Asian-Pacific Congress on
Computational Mechanics (APCOM'07) and the Eleventh International Conference on
the Enhancement and Promotion of Computational Methods in Engineering and Science
(EPMESC XI), Kyoto, Japan, (3-6 December 2007).
50) M. Kharazi, H. R. Ovesy, “Postbuckling Behaviour of Composite Plates with
through the Width Delaminations”, Proceedings of the Conference to Celebrate the Work
of Prof Jim Rhodes, Dr. David Nash (Chairman), Department of Mechanical
Engineering, University of Strathclyde, Glasgow, UK, (26-27 June 2007).
49) H. R. Ovesy, J. Fazilati, “Buckling Analysis of Thin-Walled Composite Cylindrical
Shells Using Finite Strip Method (A Full Energy Approach)”, Proceedings of the 15th
Annual Conference (International) of Mechanical Engineering (ISME 2007), Amirkabir
University of Technology, Iran, (May 2007).
48) H. R. Ovesy, A. M. Sohrabi, “Buckling Stability Analysis of Composite Laminated
Plates Using Higher Order Spline Finite Strip”, Proceedings of the 15th
Annual
Conference (International) of Mechanical Engineering (ISME 2007), Amirkabir
University of Technology, Iran, (May 2007).
47) H. R. Ovesy, J. Loughlan, S. A. M. Ghannadpour, “An Investigation On The
Geometric Non-Linear Analysis of I-Section Struts Using Finite Strip Method”,
Proceedings of the Sixth International Conference on Steel and Aluminium Structures
(ICSAS'07), Oxford, England, (24-27 July 2007).
46) H. R. Ovesy, S. A. M. Ghannadpour, M. N. Montazer Saheb, “Non-linear Finite
Strip Analysis of Composite Laminated Plates Under End Shortening, Using Shear
Deformation Plate Theory”, Proceedings of the 6th
Conference of Iranian Aerospace
Society (Aero 2007), K. N. Toosi University of Technology, Iran, (24-26 Feb 2007).
45) H. R. Ovesy, M. Kharazi, A. Sedaghati, “Analysis of the Buckling Behavior of
Through –The-Width Delamination in Laminated Composites by Using Neural Network”,
Proceedings of the 6th
Conference of Iranian Aerospace Society (Aero 2007), K. N. Toosi
University of Technology, Iran, (24-26 Feb 2007).
44) H. Assaee, H. R. Ovesy, “Post-Buckling Analysis of Laminated Plates Concerning
the Effects of Fiber Orientation in Layers”, Proceedings of the Sixth International
Conference on Composite Science & Technology (ICCST/6), Durban, South Africa, (22-
24 January 2007).
43) H. R. Ovesy, and J. Fazilati, “Finite Strip Buckling Analysis of Composite Laminated
Thin-walled Cylindrical Shells”, Proceedings (in Persian) of the 6th
Conference of Iranian
Aerospace Society (Aero 2007), K. N. Toosi University of Technology, Iran, (24-26 Feb
2007).
Last Updated November
2015
42) H. Hosseini-Toudeshky, B. Hamidi, B. Mohammadi, H. R. Ovesy, "Finite element
based prediction of failure in laminated composite plates", Proceedings of the ECF16
Conference, Alexandroupolis, Greece, (3-7 July 2006).
41) S. A. M. Ghannadpour, H. R. Ovesy, M. Kharazi, “Finite Strip Analysis of
Functionally Graded Plates Under Pressure Loads”, Proceedings of the Eighth
International Conference on Computational Structures Technology, B.H.V. Topping, G.
Montero and R. Montenegro (Editors), Civil-Comp Press, Las Palmas de Gran Canaria,
Spain, (12-15 September 2006).
40) M. Kharazi, H. R. Ovesy, S. A. M. Ghannadpour, “The Buckling of Laminates
Including Bending-Twisting Coupling Effects with Multiple Delaminations Using Spring
Simulation”, Proceedings of the Eighth International Conference on Computational
Structures Technology, B.H.V. Topping, G. Montero and R. Montenegro (Editors), Civil-
Comp Press, Las Palmas de Gran Canaria, Spain, (12-15 September 2006).
39) H. R. Ovesy , H. Hosseini-Toudeshky, M. Kharazi, “Buckling Analysis of Laminates
with Multiple Through-the-width Delaminations by Using Spring Simulated Model”,
Proceedings of the Third European Conference on Computational Mechanics Solids,
Structures and Coupled Problems in Engineering (ECCM 2006), C.A. Mota Soares et.al.
(eds.), Lisbon, Portugal, (5–8 June 2006).
38) H. R. Ovesy , S. A. M. Ghannadpour, “Large Deflection Behaviour of Functionally
Graded Plates under Pressure Loads, Using Finite Strip Method”, Proceedings of the
Third European Conference on Computational Mechanics Solids, Structures and Coupled
Problems in Engineering (ECCM 2006), C.A. Mota Soares et.al. (eds.), Lisbon, Portugal,
(5–8 June 2006).
37) H. R. Ovesy and S. A. M. Ghannadpour, “Geometric Non-linear Finite Strip
Analysis of Thin Flat Plates, Under End Shortening”, Proceedings of the 14th
Annual
Conference (International) of Mechanical Engineering (ISME 2006), Isfahan University
of Technology, Iran, (May 2006).
36) A. Hadi, H. R. Ovesy and A. Shafiee, “Stiffness Analysis of Helicopter Rotor Blade
in Beam and Chordwise Direction Using Empirical/Analytical Formulae”, Proceedings
(in Persian) of the 14th
Annual Conference (International) of Mechanical Engineering
(ISME 2006), Isfahan University of Technology, Iran, (May 2006).
35) H. Hosseini-Toudeshky, B. Mohammadi, B. Hamidi, H. R. Ovesy, “Analysis of
Composite Skin/Stiffener Debounding and Failure under Uniaxial Loading”, Proceedings
of the Thirteenth International Conference on Composite Structures (ICCS/13), Monash
University, Melbourne, Australia, (Nov. 2005).
Last Updated November
2015
34) H. R. Ovesy , S. A. M. Ghannadpour, “Geometric Nonlinear Analysis of Imperfect
Composite Laminated Plates, Under End Shortening and Pressure loading, Using Finite
Strip Method”, Proceedings of the Thirteenth International Conference on Composite
Structures (ICCS/13), Monash University, Melbourne, Australia, (Nov. 2005).
33) H. R. Ovesy , S. A. M. Ghannadpour, G. Morada, “Post-buckling Behavior of
Composite Laminated Plates Under End Shortening and Pressure Loading, Using Two
Versions of Finite Strip Method”, Proceedings of the Thirteenth International Conference
on Composite Structures (ICCS/13), Monash University, Melbourne, Australia, (Nov.
2005).
32) H. R. Ovesy , A. Hadi, “ The Influence of Bend-Twist Coupling on The Torsional
Response of Thin-Walled Box Section Composite Beam”, presented in the 4th
Australian
Congress on Applied Mechanics, Melbourne, Australia, (Feb. 2005).
31) H. R. Ovesy , S. A. M. Ghannadpour, “Nonlinear Analysis of Composite laminated
plates under end-shortening using finite strip method”, presented in the 4th
Australian
Congress on Applied Mechanics, Melbourne, Australia, (Feb. 2005).
30) H. R. Ovesy, H. Assaee, “An Investigation on the Post-Local Buckling Behavior of
Symmetric-Balanced Laminated Plates Using a Semi-Energy Finite Strip Approach”,
Proceedings of the Fifth International Conference on Composite Science & Technology
(ICCST/5), pp. 377-382, The American University of Sharjah, UAE, (1-3 Feb. 2005).
29) H. R. Ovesy , S. A. M. Ghannadpour, G. Morada,” Geometric Nonlinear Analysis of
Composite Laminated Plates with Initial Imperfection Under End Shortening, Using Two
Versions of Finite Strip Method”, Proceedings of the Fifth International Conference on
Composite Science & Technology (ICCST/5), pp. 437-442, The American University of
Sharjah, UAE, (1-3 Feb. 2005).
28) H. R. Ovesy , S. A. M. Ghannadpour, G. Morada,” Post-buckling Analysis of
Composite Laminated Plates, Using Finite Strip Method”, Proceedings of the Fifth
International Conference on Composite Science & Technology (ICCST/5), pp. 173-178,
The American University of Sharjah, UAE, (1-3 Feb. 2005).
27) H. Assaee, H. R. Ovesy, “Optimum Buckling Analysis of Some Composite Shear
Panels Using the Finite Strip Approach and Genetic Algorithm Technique” , Proceedings
of the Fifth International Conference on Composite Science & Technology (ICCST/5),
pp. 107-112, The American University of Sharjah, UAE, (1-3 Feb. 2005).
26) H. R. Ovesy, and H. Assaee, “Optimum Buckling Design of Composite Stiffened Box
Sections Using Finite Strip Approach and Genetic Algorithm Technique”, Proceedings of
The Fourth International Conference on Thin-Walled Structures, pp. 635-642,
Loughborough University, UK, (June. 2004).
Last Updated November
2015
25) H. R. Ovesy, J. Loughlan and H. Assaee, “Post-Buckling Analysis of Plates Using
The Semi-Energy Finite Strip Approach”, Proceedings of The Fourth International
Conference on Thin-Walled Structures, pp. 549-556, Loughborough University, UK,
(June. 2004).
24) H. R. Ovesy and A. Hadi, “The Constrained Torsional Characteristics of Thin-
Walled Box Section Composite Beams” Proceedings of the 5th
National and 2nd
International Iranian Aerospace Society Conference, pp. 428, Aerospace Research
Institute, Iran, (Feb. 2004).
23) H. R. Ovesy and S. A. M. Ghannadpour,” Nonlinear Analysis of Composite Plates
Under End Shortening, Using Finite Strip Method and Classical Plate Bending Theory”
Proceedings (in Persian) of the 5th
National and 2nd
International Iranian Aerospace
Society Conference, Aerospace Research Institute, Iran, (Feb. 2004).
22) M. H. Sadr-Lahidjani, A. Ahangari and H. R. Ovesy, “Buckling Analysis of Axi-
Symmetric Shells Subjected to External Pressure Using a New Element” Proceedings (in
Persian) of the 5th
National and 2nd
International Iranian Aerospace Society Conference,
Aerospace Research Institute, Iran, (Feb. 2004).
21) H. R. Ovesy and A. Aghaee, “The Derivation and Solution of the Equations
Governing the Aircraft Loading Actions in the Un-Symmetric Maneuvers for the
Preliminary Structural Design” Proceedings (in Persian) of the 5th
National and 2nd
International Iranian Aerospace Society Conference, Aerospace Research Institute, Iran,
(Feb. 2004).
20) H. R. Ovesy, H. Poor-Abbasi and R. Saffar-Khozanie, “Aircraft Longitudinal
Loading Analysis in the Symmetric Maneuvers due to Elevator Sinusoidal Movement”
Proceedings (in Persian) of the 5th
National and 2nd
International Iranian Aerospace
Society Conference, Aerospace Research Institute, Iran, (Feb. 2004).
19) H. Hosseini-Toudeshky, H. R. Ovesy and M. Kharazi, “A Comprehensive Study of
Composite Panels Stiffened by Beads”, Proceedings of the Conference of Experimental
Techniques and Design in Composite Materials 6, pp. 85, University of Padova, Italy,
(18-20 June 2003).
18) H. R. Ovesy and A. Hadi, “Parametric Study of Closed Section Thin-Walled Fibrous
Composite Beams Subjected to Torsion”, Proceedings of the 11th
Annual Conference
(International) of Mechanical Engineering (ISME), pp. 417-424, Ferdowsi University of
Mashhad, Iran, (May 2003).
17) H. R. Ovesy and H. Assaee, “Buckling Analysis of Composite Z-Section Beams
Under Longitudinal Compression Using Finite Strip Method”, AIAA-2003-1987,
Norfolk, VA, USA, (April 2003).
Last Updated November
2015
16) H. R. Ovesy and H. Assaee, “Buckling Characteristics of Some Composite Stiffened
Boxes Under Longitudinal Compression or Bending Using Finite Strip Approach”,
AIAA-2003-1791, Norfolk, VA, USA, (April 2003).
15) M. H. Sadr-Lahidjani, H. R. Ovesy and Sh. Shams, “Aeroelastic and Flutter Analysis
of a Flexible Wing”, AIAA-2003-1492, Norfolk, VA, USA, (April 2003).
14) H. Hosseini-Toudeshky, M. Kharazi and H. R. Ovesy, “A Simple Method to Estimate
Buckling Loads of Bead Stiffened Composite Panels”, Proceedings of the 4th
IAS
Conference, Vol. 4, pp. 1-7, Amirkabir University of Technology, Iran, (Jan. 2003).
13) H. R. Ovesy and H. Assaee, “A Finite Strip Approach to Investigate the Effects of
Lay-Up Properties on the Buckling Characteristics of a Composite Plate Under In-Plane
Interactive Loading”, Proceedings of the 4th
IAS Conference, Vol. 4, pp. 99-104,
Amirkabir University of Technology, Iran, (Jan. 2003).
12) H. R. Ovesy and A. Hadi, “Torsional Analysis of Thin-Walled Box Section
Composite Beams”, Proceedings of the 4th
IAS Conference, Vol. 4, pp. 16-24, Amirkabir
University of Technology, Iran, (Jan. 2003).
11) M. H. Sadr-Lahidjani, H. R. Ovesy and N. Shaeri, “Finite Element Model of Piezo-
Electric Material”, Proceedings (in Persian) of the 4th
IAS Conference, Vol. 1, pp. 420-
427, Amirkabir University of Technology, Iran, (Jan. 2003).
10) M. H. Sadr-Lahidjani, H. R. Ovesy and A. Ahangari, “A Semi-Analytical Element for
the Buckling Analysis of Axi-Symmetric Shells”, Proceedings (in Persian) of the 4th
IAS
Conference, Vol. 1, pp. 218-228, Amirkabir University of Technology, Iran, (Jan. 2003).
9) H. R. Ovesy, H. Poor-Abbasi and R. Saffar-Khozanie, “The Derivation of the
Differential Equations Governing the Aircraft Longitudinal Loading Actions in the
Symmetric Maneuvers”, Proceedings (in Persian) of the 4th
IAS Conference, Vol. 1, pp.
115-126, Amirkabir University of Technology, Iran, (Jan. 2003).
8) H. R. Ovesy, H. Poor-Abbasi and R. Saffar-Khozanie, “Aircraft Longitudinal Loading
Analysis in the Symmetric Maneuvers”, Proceedings (in Persian) of the 4th
IAS
Conference, Vol. 1, pp. 127-137, Amirkabir University of Technology, Iran, (Jan. 2003).
Last Updated November
2015
7) M. A. Koochakzadeh, H. R. Ovesy and B. Alem, “A Method on the Application of the
Boundary Conditions for the Analysis of a Fuselage Using Finite Element Method”,
Proceedings (in Persian) of the 4th
IAS Conference, Vol. 1, pp. 167-1176, Amirkabir
University of Technology, Iran, (Jan. 2003).
6) H. Hosseini-Toudeshky, H. R. Ovesy and M. Kharazi, “Buckling Behavior of Stiffened
Composite Panels Containing Vertical Beads”, Proceedings of the 10th
ISME
Conference, pp. 553-558, K. N. Toosi University of Technology, Iran, (May 2002).
5) H. R. Ovesy and H. Assaee, “Finite Strip Buckling Analysis of Composite I-Section
Beams Subjected to Longitudinal Compression”, Proceedings of the 10th
ISME
Conference, pp. 481-486, K. N. Toosi University of Technology, Iran, (May 2002).
4) H. R. Ovesy and H. Assaee, “Buckling Analysis of Composite Stiffened Plate
Structures due to Interaction of In-plane Compression and Shear Loading, Using Finite
Strip Method”, Proceedings of the Third Australasian Congress on Applied Mechanics,
pp. 533-538, Sydney University, Australia, (Feb. 2002).
3) H. R. Ovesy and H. Assaee, “Buckling Analysis of Composite Thin-Walled Structures
Using Finite Strip Method”, Proceedings (in Persian) of the Fifth Annual Congress of
Iranian Metallurgical Engineering Society, pp. 793-801, Amirkabir University of
Technology, Iran, (Nov. 2001).
2) H. R. Ovesy and H. Assaee, “Buckling Analysis of Some Composite Stiffened Plate
Structures due to In-plane Compression and Shear Loading Using Finite Strip Method”,
Proceedings of ISME 2001, pp. 75-82, Guilan University, Iran, (May 2001).
1) H. R. Ovesy and R. Saffar-Khozanie, “Local Buckling Analysis of Isotropic Panels
Subjected to In-Plane Compressional, Shear and Bending Using Finite Strip Method”
Proceedings (in Persian) of the 3rd
National and 1st International IAS Conference, pp.
1195-1204, Sharif Univ. of Technology, Tehran, Iran, (Jan. 2001).
Last Updated November
2015
SUPERVISED M.Sc. THESES (Selected):
33) Namavar, M. S., “Post-Buckling Analysis of Perforated Composite Thin Panel with
the Spline Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, August. 2015.
32) Nikrad, F., “Post-Buckling and Growth Analysis of Delamination within Laminated
Composite Beam-Columns”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University
of Technology, Feb. 2015.
31) Rabet, S., “Buckling and Free-Vibration Analysis of Nano-Plates Using Molecular
Dynamics Simulation”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, Feb. 2015.
30) Naghinejad, M., “Analysis of Delamination Growth Speed in Buckled Composite
Laminates”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of Technology,
August. 2014.
29) Madjmanesh, N., “Buckling Analysis of Delaminated Composite Plates with
Piezoelectric Subjected to Thermo-Electro- Mechanical Loads”, M.Sc. Thesis, Aerospace
Eng. Dept., Amirkabir University of Technology, July. 2014.
28) Mahmoudabadi, M. R., “Finite Strip Analysis of the Dynamic Instability of
Laminated Composite Cylindrical Shells with Delaminations under Parametric Harmonic
Forces”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of Technology, Feb.
2014.
27) Amini, E., “Investigation of Effect of Ply Orientation on Delamination Behavior of
Laminated Composites under Compressive Load”, M.Sc. Thesis, Textile Eng. Dept.,
Amirkabir University of Technology, Jan. 2014, (Co-supervised with Prof. A. A.
Asgharian Jeddi).
26) Totounferoush, A., “Dynamic Buckling Analysis of Delaminated Composite Plates
with Piezoelectric Layers Subjected to Electro-Mechanical Loads”, M.Sc. Thesis,
Aerospace Eng. Dept., Amirkabir University of Technology, Oct. 2013.
25) Yousefpoor, M., “Buckling Analysis of Composite Plates with Piezoelectric Layers
Using FSM under End-shortening and Electrical Loading”, M.Sc. Thesis, Aerospace Eng.
Dept., Amirkabir University of Technology, Oct. 2013.
24) Barooti, M. M., “Stability Analysis of Symmetric Orthotropic Composite Plates with
Through-the-width Delamination”, M.Sc. Thesis, Mechanical Eng. Dept., Amirkabir
University of Technology, Sept. 2013, (Co-supervised with Prof. M. Mohammadi-
Aghdam).
Last Updated November
2015
23) Chitsaz, N., “Non-Linear Buckling Analysis of Delaminated Piezoelectric Composite
Plates Based on Layer-Wise Theory”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, June. 2013.
22) Bahrami, S., “Analysis of Laminated Cylindrical Panel (FGM) with Piezoelectric
Layer Under Dynamic Loads”, M.Sc. Thesis, Mechanical Eng. Dept., Amirkabir
University of Technology, Feb. 2013, (Co-supervised with Prof. M. Shakeri).
21) Taherzadeh Esfahani, M., “Buckling of Initially Delaminated Composite Beams”,
M.Sc. Thesis, Mechanical Eng. Dept., Amirkabir University of Technology, Sept. 2012,
(Co-supervised with Prof. M. Z. Kabir)..
20) Shirmohammadali, H., “Buckling Analysis of Perforated Composite Thin Panel with
the Spline Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, June. 2012.
19) Zia-Dehkordi, E., “Stability Analysis of Moderately Thick Plates Using Exact Finite
Strip Solution Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, Feb. 2012.
18) Nikou, A., “Full Nonlinear Aeroelastic Analysis of Highly Flexible Wings”, M.Sc.
Thesis, Aerospace Eng. Dept., Amirkabir University of Technology, Feb. 2012.
17) Nassirnia, M., “Buckling and Post-buckling Analysis of FGM Plates Using FSM
under End-shortening and Thermal Loading”, M.Sc. Thesis, Aerospace Eng. Dept.,
Amirkabir University of Technology, Oct. 2010.
16) Asghari Mooneghi, M., “Stability Analysis of Delaminated Composite Laminates
Based on Layerwise Theory”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University
of Technology, July. 2010.
15) Javadiyeh, M., “Transient Analysis of Composite Laminated Plates by Finite Strip
Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of Technology, Jan.
2010.
14) Taghizadeh, M., “Buckling and Post Buckling Behavior of Delaminated Composites
with Higher Order Shear Deformation Theory”, M.Sc. Thesis, Aerospace Eng. Dept.,
Amirkabir University of Technology, Jan. 2010.
13) Hajikazemi, M., “Post Buckling Analysis of Relatively Thick Composite Plates With
Semi Energy Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, Jan. 2010.
12) Mousavi, S. G., “Effects of Geometric Structural Nonlinearity on Flutter Of High-
Aspect-Ratio Wings”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, Feb. 2009.
Last Updated November
2015
11) Khaneh Masjedi, P., “Aeroelastic Instability of Aircraft Wings Modeled as
Composite Thin-Walled Beams”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, Feb. 2009.
10) Sherafat, M. H., “Buckling And Post Buckling Analysis of Composite Laminated
Plates Subject To Mechanical/Thermal Loading By Using Higher Order Semi-Analytical
Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, Feb. 2009.
9) Sohrabi, A., “Stability Analysis Of Moderately Thick Composite Structures Using
Generalized Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, May 2007.
8) Montazer-Saheb, M. H., “Nonlinear Analysis of Functionally Graded Plates Using
Finite Strip Methods”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, April 2007.
7) Sedaghati, A., “Delamination Analysis Using Neural Networks”, M.Sc. Thesis,
Aerospace Eng. Dept., Amirkabir University of Technology, April 2007.
6) Fazilati, J., “Finite Strip Buckling and Post - Buckling Analysis of Composite
Shells”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of Technology, Feb.
2006.
5) Morada, G., “Post-Buckling Analysis of Laminated Composite Structures with the
Spline Finite Strip Method”, M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University
of Technology, Feb. 2005.
4) Ghannadpour, S. A. M., "Finite Strip Post Buckling Analysis of Composite Prismatic
Plate Structures ", M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of
Technology, Nov. 2003.
3) Hadi, A., "Torsional Analysis of Thin-Walled Section Composite Beams", M.Sc.
Thesis, Aerospace Eng. Dept., Amirkabir University of Technology, Oct. 2001.
2) Assaee, H., "Finite Strip Buckling Analysis of Composite Laminated Plates and Plate
Structures", M.Sc. Thesis, Aerospace Eng. Dept., Amirkabir University of Technology,
Oct. 2001.
1) Azadmanesh, A., "Stress Analysis of Helicopter Metallic Blade", M.Sc. Thesis,
Aerospace Eng. Dept., Amirkabir University of Technology, Nov. 2000.
Last Updated November
2015
SUPERVISED Ph.D. THESES:
6) Taghizadeh, M., "Buckling Analysis of Plates in Nano-Scale by Using Non-local
Integral Elasticity Theory", Ph.D. Thesis, Dept. of Aerospace Eng., Amirkabir University
of Technology, (Nov. 2015).
5) Khaneh Masjedi, P., "Aeroelastic Analysis of Helicopter Blade in Transient Flight by
Using A Geometrically Exact Beam Model in Conjunction with A Free Wake
Aerodynamic Model", Ph.D. Thesis, Dept. of Aerospace Eng., Amirkabir University of
Technology, (Feb. 2015).
4) Fazilati, J., "Higher Order Finite Strip Dynamic Instability Analysis of Composite
Stiffened Cylindrical Panels Having Cut-outs under Parametric In-plane Loads", Ph.D.
Thesis, Dept. of Aerospace Eng., Amirkabir University of Technology, (June. 2010).
3) Kharazi, M., "Buckling and Post-buckling Analysis in Predicting the Onset of The
Delamination Growth in Laminated Composite Plates", Ph.D. Thesis, Dept. of Aerospace
Eng., Amirkabir University of Technology, (Feb. 2009).
2) Ghannadpour, S. A. M., "Relative Post-Buckling Stiffness Calculation of Composite
Prismatic Plate Structures Using Full-Analytical Finite Strip Method", Ph.D. Thesis,
Aerospace Eng. Dept., Amirkabir University of Technology, (Oct. 2008).
1) Assaee, H., "Post-Local-Buckling Analysis of Composite Thin-Walled Sections Using
Semi-Energy Finite Strip Method", Ph.D. Thesis, Aerospace Eng. Dept., Amirkabir
University of Technology, (Feb. 2008).