6
AUTOMOTIVE AFTERMARKET PERFORMANCE SOLUTIONS FOR THE
| Date post: | 22-May-2018 |
| Category: |
Documents |
| Upload: | truongnguyet |
| View: | 214 times |
| Download: | 1 times |
AUTOMOTIVE AFTERMARKET
PERFORMANCE SOLUTIONS FOR THE
Product Backing AdhesiveTotal thickness
(mils)Tensile strength (lb/in of width)
Adhesion to steel (oz/in of width)
Elongation (% at break)
Temperature resistance
Color
OM Fine crepe paper
Natural rubber/resin
7.1 (0.18mm)
23 (101 N/25mm)
27 (7.4 N/25mm)
12250ºF (121ºC)
30 minOrange
PG Fine crepe paper
Natural rubber 7.3 (0.19mm)26
(114 N/25mm)28
(7.7 N/25mm)10
250ºF (121ºC)30 min
Beige
AM Saturated crepe paper
Natural rubber/resin
6.6 (0.17mm)
20 (87.5 N/25mm)
28 (7.6 N/25mm)
12225ºF (107ºC)
30 minAqua
(blue-green)
MP Crepe paper Natural rubber6.1
(0.155mm)25
(109.5 N/25mm)33
(9 N/25mm)8
250ºF (121ºC)1 hour
Beige
UG Coarse crepe paper
Natural rubber5.8
(0.15 mm)23
(101 N/25mm)34
(9.3 N/25mm)14
175ºF (80ºC)30 min
Beige
519 Crepe paperNatural/synthetic
rubber6.0
(0.15mm)23
(101 N/25mm)36
(9.8 N/25mm)7
180ºF (82ºC)1 hour
Beige
TM27 Crepe paper/PET film
Rubber/resin7.6
(0.19mm)-
30 (8.2 N/25mm)
-225ºF (107ºC)
1 hourNatural
Product Physical Properties
N10
00 R
V06
/201
6Distributed by:Norton | Saint-GobainAutomotive Aftermarketwww.nortonabrasives.comNorton is a registered trademark of Saint-Gobain. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
www.itape.comAmerican® brand is a registered trademark of Intertape Polymer Group® Inc. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
American® brand TM27 TrimFast™ is specifically designed for flush mount and inset molding around windshields and other automotive glass. Perforated for easy cornering and eliminates the need for dangerous knives or razor blades. TM27 ensures clean removal from finished paint work without slivering, saving time and money!
PERFORMANCE ADVANTAGES
• Easy to apply and removes cleanly
• Two plastic strips for easy handling
• No release liner for faster installation and less waste
• Pre-folded edge allows ease of removal
• Two sizes in one!
THE PERFECT CHOICE FOR AUTO MOLDING PROTECTION!
Part # IPG Resource Size Case Qty
077922-00268 TM27..1 50mm x 10m (1.96in x 10.9yd) 24 rolls
IPG’s Hand Mask is a pre-folded, high density polyethylene masking film designed for multiple transportation applications. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying film from sticking.
PERFORMANCE ADVANTAGES
• Corona-treated so paint won’t flake off
• Durable film resists tearing; requires less tape
• Solvent resistant; no bleed-through
• Clings to surface, preventing overspray
• Designed to work with multiple hand dispensers
• 1" core fits most masking machinesin(mm) in the chart to the right indicates length of the material when unfolded.
PREVENT OVERSPRAY WITH IPG’s HAND MASK FILM!
Part # IPG Resource Size Roll Height Case Qty
087143-00214 HMF...24 24in x 180ft (609.6mm x 54.9m) 5.35in 12 rolls
087143-00215 HMF...36 36in x 90ft (914.4mm x 27.4m) 6.81in 12 rolls
087143-00216 HMF...48 48in x 180ft (1219.2mm x 54.9m) 8.78in 12 rolls
087143-00217 HMF…72 72in x 90ft (1828.8mm x 27.4m) 9.57in 12 rolls
087143-00218 HMF…99 99in x 90ft (2514.6mm x 27.4m) 13.0in 12 rolls
HAND MASK FILM519
An economical masking tape to meet the basic needs of a collision repair shop.
PERFORMANCE ADVANTAGES
• Temperature resistance: 180ºF (82ºC) for 1 hour
• UV resistant up to 5 hours
• Excellent adhesion to backing when layered
• Works with both solvent and waterborne paints
• Clean removal at ambient temperature; stain resistant; resists bleed-through
• Resists paint flaking
519 MEDIUM GRADE PAPER MASKING TAPE
U S AMADE IN THE Part # IPG Resource Size Case Qty
077922-73848 73848 18mm x 54.8m (0.70in x 60yd) 48 rolls
077922-73858 73858 24mm x 54.8m (0.94in x 60yd) 36 rolls
077922-73859 73859 36mm x 54.8m (1.41in x 60yd) 24 rolls
077922-73860 73860 48mm x 54.8m (1.88in x 60yd) 24 rolls
An economical, yet very reliable masking tape to meet the needs of most collision repair and refinish shops. UG offers an excellent balance of quick stick, panel adhesion and holding properties. Under normal temperature conditions, UG is the tape of choice for fast, basic service, including wet-stripping.
PERFORMANCE ADVANTAGES
• Good cornering
• Temperature resistance: 175ºF (80ºC) for 30 minutes
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
UGRELIABLE PERFORMANCE IN AN
ECONOMICAL PACKAGE.
Part # IPG Resource Size Case Qty
077922-88400 UG1850 18mm x 50m (0.70in x 54.6yd) 48 rolls
077922-88401 UG2450 24mm x 50m (0.94in x 54.6yd) 36 rolls
077922-88402 UG3650 36mm x 50m (1.41in x 54.6yd) 24 rolls
077922-88403 UG4850 48mm x 50m (1.88in x 54.6yd) 24 rolls
U S AMADE IN THE
AMSEE WHY WE PUT THE AM
IN AMERICAN!
American® brand AM is the cost-effective solution designed to perform in many automotive masking applications. AM's rubber-based adhesive provides adhesion to painted surfaces, bare metals and plastics, yet removes cleanly without adhesive residue, paint “flaking” from backside or surface staining.
PERFORMANCE ADVANTAGES• Good cornering
• Temperature resistance: 225ºF (107ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
U S AMADE IN THE
Part # IPG Resource Size Case Qty
087143-00314 AM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00315 AM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00316 AM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00317 AM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00580 AM7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
Automotive Aftermarket Masking Solutions
PG
American® brand PG is a high quality masking tape with good quick stick and holding properties. Designed for paint masking that requires clean and easy removal from a variety of hot or cold surfaces. The state-of-the-art performance features make it a premium tape for automotive refinishing applications.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharppaint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
• Available in narrow widths for detail applications
PG TAKES THE CHECKERED FLAG FOR OVERALL PERFORMANCE!
Part # IPG Resource Size Case Qty
087143-00587 PG27..2 6mm x 54.8m (0.23in x 60yd) 36 rolls
087143-00586 PG27..41 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00310 PG1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00311 PG2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00312 PG3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00313 PG4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00581 PG7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
U S AMADE IN THE
SYNONYMOUS WITH OUTSTANDING MASKING PERFORMANCE!
American® brand Orange Mask® (OM) is a high performance masking tape developed to provide superior adhesion, UV resistance and high conformability. OM unwinds and applies smoothly and removes cleanly to deliver clean crisp paint lines. The superior solution for all automotive refinishers.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharppaint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
OM
Part # IPG Resource Size Case Qty
087143-00577 ORANGE MASK 12 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00306 OM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00307 OM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00308 OM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00309 OM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00690 OM7655 76mm x 54.8m (2.99in x 60yd) 16 rolls
U S AMADE IN THE
IPG® and Norton are committed to a vision for the
Automotive PBE Market to be recognized as a leader
in performance masking, surface protection and
complementary products − by upholding our customer
commitment to deliver solutions that increase productivity,
maintain product integrity, contain cost and promote
environmental stewardship.
American® brand and Norton products have long been trusted by collision repair
professionals for their unsurpassed quality and performance. But we do not
rely only on our joint history or reputation. Our mission, as a team, is to
build upon this proven performance and exceed the expectations of our
customers in the automotive aftermarket.
MPDESIGNED WITH YOUR WALLET AND
GOOD REPUTATION IN MIND.
PERFORMANCE ADVANTAGES
• Good cornering
• High temperature resistance: 250ºF (121ºC) forone hour
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
Capable of withstanding oven temperatures up to 250ºF (121ºC) for one hour, MP provides higher temperature resistance versus most general purpose masking tapes. MP is also UV resistant for up to three days with clean removal. Moisture and stain resistant, its specially designed adhesive sticks firmly and securely to most surfaces and removes cleanly.
Part # IPG Resource Size Case Qty
087143-00499 MP1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00500 MP2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00501 MP3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00502 MP4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
U S AMADE IN THE
An economical, yet very reliable masking tape to meet the needs of most collision repair and refinish shops. UG offers an excellent balance of quick stick, panel adhesion and holding properties. Under normal temperature conditions, UG is the tape of choice for fast, basic service, including wet-stripping.
PERFORMANCE ADVANTAGES
• Good cornering
• Temperature resistance: 175ºF (80ºC) for 30 minutes
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
UGRELIABLE PERFORMANCE IN AN
ECONOMICAL PACKAGE.
Part # IPG Resource Size Case Qty
077922-88400 UG1850 18mm x 50m (0.70in x 54.6yd) 48 rolls
077922-88401 UG2450 24mm x 50m (0.94in x 54.6yd) 36 rolls
077922-88402 UG3650 36mm x 50m (1.41in x 54.6yd) 24 rolls
077922-88403 UG4850 48mm x 50m (1.88in x 54.6yd) 24 rolls
U S AMADE IN THE
AMSEE WHY WE PUT THE AM
IN AMERICAN!
American® brand AM is the cost-effective solution designed to perform in many automotive masking applications. AM's rubber-based adhesive provides adhesion to painted surfaces, bare metals and plastics, yet removes cleanly without adhesive residue, paint “flaking” from backside or surface staining.
PERFORMANCE ADVANTAGES• Good cornering
• Temperature resistance: 225ºF (107ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
U S AMADE IN THE
Part # IPG Resource Size Case Qty
087143-00314 AM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00315 AM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00316 AM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00317 AM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00580 AM7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
Automotive Aftermarket Masking Solutions
PG
American® brand PG is a high quality masking tape with good quick stick and holding properties. Designed for paint masking that requires clean and easy removal from a variety of hot or cold surfaces. The state-of-the-art performance features make it a premium tape for automotive refinishing applications.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharp paint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
• Available in narrow widths for detail applications
PG TAKES THE CHECKERED FLAG FOR OVERALL PERFORMANCE!
Part # IPG Resource Size Case Qty
087143-00587 PG27..2 6mm x 54.8m (0.23in x 60yd) 36 rolls
087143-00586 PG27..41 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00310 PG1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00311 PG2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00312 PG3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00313 PG4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00581 PG7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
U S AMADE IN THE
SYNONYMOUS WITH OUTSTANDING MASKING PERFORMANCE!
American® brand Orange Mask® (OM) is a high performance masking tape developed to provide superior adhesion, UV resistance and high conformability. OM unwinds and applies smoothly and removes cleanly to deliver clean crisp paint lines. The superior solution for all automotive refinishers.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharp paint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
OM
Part # IPG Resource Size Case Qty
087143-00577 ORANGE MASK 12 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00306 OM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00307 OM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00308 OM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00309 OM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00690 OM7655 76mm x 54.8m (2.99in x 60yd) 16 rolls
U S AMADE IN THE
IPG® and Norton are committed to a vision for the
Automotive PBE Market to be recognized as a leader
in performance masking, surface protection and
complementary products − by upholding our customer
commitment to deliver solutions that increase productivity,
maintain product integrity, contain cost and promote
environmental stewardship.
American® brand and Norton products have long been trusted by collision repair
professionals for their unsurpassed quality and performance. But we do not
rely only on our joint history or reputation. Our mission, as a team, is to
build upon this proven performance and exceed the expectations of our
customers in the automotive aftermarket.
MPDESIGNED WITH YOUR WALLET AND
GOOD REPUTATION IN MIND.
PERFORMANCE ADVANTAGES
• Good cornering
• High temperature resistance: 250ºF (121ºC) for one hour
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
Capable of withstanding oven temperatures up to 250ºF (121ºC) for one hour, MP provides higher temperature resistance versus most general purpose masking tapes. MP is also UV resistant for up to three days with clean removal. Moisture and stain resistant, its specially designed adhesive sticks firmly and securely to most surfaces and removes cleanly.
Part # IPG Resource Size Case Qty
087143-00499 MP1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00500 MP2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00501 MP3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00502 MP4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
U S AMADE IN THE
An economical, yet very reliable masking tape to meet the needs of most collision repair and refinish shops. UG offers an excellent balance of quick stick, panel adhesion and holding properties. Under normal temperature conditions, UG is the tape of choice for fast, basic service, including wet-stripping.
PERFORMANCE ADVANTAGES
• Good cornering
• Temperature resistance: 175ºF (80ºC) for 30 minutes
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
UGRELIABLE PERFORMANCE IN AN
ECONOMICAL PACKAGE.
Part # IPG Resource Size Case Qty
077922-88400 UG1850 18mm x 50m (0.70in x 54.6yd) 48 rolls
077922-88401 UG2450 24mm x 50m (0.94in x 54.6yd) 36 rolls
077922-88402 UG3650 36mm x 50m (1.41in x 54.6yd) 24 rolls
077922-88403 UG4850 48mm x 50m (1.88in x 54.6yd) 24 rolls
U S AMADE IN THE
AMSEE WHY WE PUT THE AM
IN AMERICAN!
American® brand AM is the cost-effective solution designed to perform in many automotive masking applications. AM's rubber-based adhesive provides adhesion to painted surfaces, bare metals and plastics, yet removes cleanly without adhesive residue, paint “flaking” from backside or surface staining.
PERFORMANCE ADVANTAGES• Good cornering
• Temperature resistance: 225ºF (107ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
U S AMADE IN THE
Part # IPG Resource Size Case Qty
087143-00314 AM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00315 AM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00316 AM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00317 AM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00580 AM7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
Automotive Aftermarket Masking Solutions
PG
American® brand PG is a high quality masking tape with good quick stick and holding properties. Designed for paint masking that requires clean and easy removal from a variety of hot or cold surfaces. The state-of-the-art performance features make it a premium tape for automotive refinishing applications.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharp paint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
• Available in narrow widths for detail applications
PG TAKES THE CHECKERED FLAG FOR OVERALL PERFORMANCE!
Part # IPG Resource Size Case Qty
087143-00587 PG27..2 6mm x 54.8m (0.23in x 60yd) 36 rolls
087143-00586 PG27..41 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00310 PG1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00311 PG2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00312 PG3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00313 PG4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00581 PG7255 72mm x 54.8m (2.83in x 60yd) 16 rolls
U S AMADE IN THE
SYNONYMOUS WITH OUTSTANDING MASKING PERFORMANCE!
American® brand Orange Mask® (OM) is a high performance masking tape developed to provide superior adhesion, UV resistance and high conformability. OM unwinds and applies smoothly and removes cleanly to deliver clean crisp paint lines. The superior solution for all automotive refinishers.
PERFORMANCE ADVANTAGES• Sharp color separation on curves or straight lines
• Exceptional cornering
• Fine crepe paper backing ensures overall sharp paint lines
• Smooth to the touch – easy to work with
• High temperature resistance: 250ºF (121ºC) for 30 minutes
• 3 day UV resistance
• Excellent adhesion to backing when layered
• Smooth and controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
OM
Part # IPG Resource Size Case Qty
087143-00577 ORANGE MASK 12 12mm x 54.8m (0.47in x 60yd) 72 rolls
087143-00306 OM1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00307 OM2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00308 OM3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00309 OM4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
087143-00690 OM7655 76mm x 54.8m (2.99in x 60yd) 16 rolls
U S AMADE IN THE
IPG® and Norton are committed to a vision for the
Automotive PBE Market to be recognized as a leader
in performance masking, surface protection and
complementary products − by upholding our customer
commitment to deliver solutions that increase productivity,
maintain product integrity, contain cost and promote
environmental stewardship.
American® brand and Norton products have long been trusted by collision repair
professionals for their unsurpassed quality and performance. But we do not
rely only on our joint history or reputation. Our mission, as a team, is to
build upon this proven performance and exceed the expectations of our
customers in the automotive aftermarket.
MPDESIGNED WITH YOUR WALLET AND
GOOD REPUTATION IN MIND.
PERFORMANCE ADVANTAGES
• Good cornering
• High temperature resistance: 250ºF (121ºC) for one hour
• Up to 3 day UV resistance
• Excellent adhesion to backing when layered
• Controlled unwind
• Works with both solvent and waterborne paints
• Clean removal; stain resistant; resists bleed-through
• Superior for wet sanding applications
• Resists paint flaking
Capable of withstanding oven temperatures up to 250ºF (121ºC) for one hour, MP provides higher temperature resistance versus most general purpose masking tapes. MP is also UV resistant for up to three days with clean removal. Moisture and stain resistant, its specially designed adhesive sticks firmly and securely to most surfaces and removes cleanly.
Part # IPG Resource Size Case Qty
087143-00499 MP1855 18mm x 54.8m (0.70in x 60yd) 48 rolls
087143-00500 MP2455 24mm x 54.8m (0.94in x 60yd) 36 rolls
087143-00501 MP3655 36mm x 54.8m (1.41in x 60yd) 24 rolls
087143-00502 MP4855 48mm x 54.8m (1.88in x 60yd) 24 rolls
U S AMADE IN THE
AUTOMOTIVE AFTERMARKET
PERFORMANCE SOLUTIONS FOR THE
Product Backing AdhesiveTotal thickness
(mils)Tensile strength (lb/in of width)
Adhesion to steel (oz/in of width)
Elongation (% at break)
Temperature resistance
Color
OM Fine crepe paper
Natural rubber/resin
7.1 (0.18mm)
23 (101 N/25mm)
27 (7.4 N/25mm)
12250ºF (121ºC)
30 minOrange
PG Fine crepe paper
Natural rubber 7.3 (0.19mm)26
(114 N/25mm)28
(7.7 N/25mm)10
250ºF (121ºC)30 min
Beige
AM Saturated crepe paper
Natural rubber/resin
6.6 (0.17mm)
20 (87.5 N/25mm)
28 (7.6 N/25mm)
12225ºF (107ºC)
30 minAqua
(blue-green)
MP Crepe paper Natural rubber6.1
(0.155mm)25
(109.5 N/25mm)33
(9 N/25mm)8
250ºF (121ºC)1 hour
Beige
UG Coarse crepe paper
Natural rubber5.8
(0.15 mm)23
(101 N/25mm)34
(9.3 N/25mm)14
175ºF (80ºC)30 min
Beige
519 Crepe paperNatural/synthetic
rubber6.0
(0.15mm)23
(101 N/25mm)36
(9.8 N/25mm)7
180ºF (82ºC)1 hour
Beige
TM27 Crepe paper/PET film
Rubber/resin7.6
(0.19mm)-
30 (8.2 N/25mm)
-225ºF (107ºC)
1 hourNatural
Product Physical Properties
N10
00 R
V06
/201
6Distributed by:Norton | Saint-GobainAutomotive Aftermarketwww.nortonabrasives.comNorton is a registered trademark of Saint-Gobain. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
www.itape.comAmerican® brand is a registered trademark of Intertape Polymer Group® Inc. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
American® brand TM27 TrimFast™ is specifically designed for flush mount and inset molding around windshields and other automotive glass. Perforated for easy cornering and eliminates the need for dangerous knives or razor blades. TM27 ensures clean removal from finished paint work without slivering, saving time and money!
PERFORMANCE ADVANTAGES
• Easy to apply and removes cleanly
• Two plastic strips for easy handling
• No release liner for faster installation and less waste
• Pre-folded edge allows ease of removal
• Two sizes in one!
THE PERFECT CHOICE FOR AUTO MOLDING PROTECTION!
Part # IPG Resource Size Case Qty
077922-00268 TM27..1 50mm x 10m (1.96in x 10.9yd) 24 rolls
IPG’s Hand Mask is a pre-folded, high density polyethylene masking film designed for multiple transportation applications. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying film from sticking.
PERFORMANCE ADVANTAGES
• Corona-treated so paint won’t flake off
• Durable film resists tearing; requires less tape
• Solvent resistant; no bleed-through
• Clings to surface, preventing overspray
• Designed to work with multiple hand dispensers
• 1" core fits most masking machinesin(mm) in the chart to the right indicates length of the material when unfolded.
PREVENT OVERSPRAY WITH IPG’s HAND MASK FILM!
Part # IPG Resource Size Roll Height Case Qty
087143-00214 HMF...24 24in x 180ft (609.6mm x 54.9m) 5.35in 12 rolls
087143-00215 HMF...36 36in x 90ft (914.4mm x 27.4m) 6.81in 12 rolls
087143-00216 HMF...48 48in x 180ft (1219.2mm x 54.9m) 8.78in 12 rolls
087143-00217 HMF…72 72in x 90ft (1828.8mm x 27.4m) 9.57in 12 rolls
087143-00218 HMF…99 99in x 90ft (2514.6mm x 27.4m) 13.0in 12 rolls
HAND MASK FILM519
An economical masking tape to meet the basic needs of a collision repair shop.
PERFORMANCE ADVANTAGES
• Temperature resistance: 180ºF (82ºC) for 1 hour
• UV resistant up to 5 hours
• Excellent adhesion to backing when layered
• Works with both solvent and waterborne paints
• Clean removal at ambient temperature; stain resistant; resists bleed-through
• Resists paint flaking
519 MEDIUM GRADE PAPER MASKING TAPE
U S AMADE IN THE Part # IPG Resource Size Case Qty
077922-73848 73848 18mm x 54.8m (0.70in x 60yd) 48 rolls
077922-73858 73858 24mm x 54.8m (0.94in x 60yd) 36 rolls
077922-73859 73859 36mm x 54.8m (1.41in x 60yd) 24 rolls
077922-73860 73860 48mm x 54.8m (1.88in x 60yd) 24 rolls
AUTOMOTIVE AFTERMARKET
PERFORMANCE SOLUTIONS FOR THE
Product Backing AdhesiveTotal thickness
(mils)Tensile strength (lb/in of width)
Adhesion to steel (oz/in of width)
Elongation (% at break)
Temperature resistance
Color
OM Fine crepe paper
Natural rubber/resin
7.1 (0.18mm)
23 (101 N/25mm)
27 (7.4 N/25mm)
12250ºF (121ºC)
30 minOrange
PG Fine crepe paper
Natural rubber 7.3 (0.19mm)26
(114 N/25mm)28
(7.7 N/25mm)10
250ºF (121ºC)30 min
Beige
AM Saturated crepe paper
Natural rubber/resin
6.6 (0.17mm)
20 (87.5 N/25mm)
28 (7.6 N/25mm)
12225ºF (107ºC)
30 minAqua
(blue-green)
MP Crepe paper Natural rubber6.1
(0.155mm)25
(109.5 N/25mm)33
(9 N/25mm)8
250ºF (121ºC)1 hour
Beige
UG Coarse crepe paper
Natural rubber5.8
(0.15 mm)23
(101 N/25mm)34
(9.3 N/25mm)14
175ºF (80ºC)30 min
Beige
519 Crepe paperNatural/synthetic
rubber6.0
(0.15mm)23
(101 N/25mm)36
(9.8 N/25mm)7
180ºF (82ºC)1 hour
Beige
TM27 Crepe paper/PET film
Rubber/resin7.6
(0.19mm)-
30 (8.2 N/25mm)
-225ºF (107ºC)
1 hourNatural
Product Physical Properties
N10
00 R
V06
/201
6Distributed by:Norton | Saint-GobainAutomotive Aftermarketwww.nortonabrasives.comNorton is a registered trademark of Saint-Gobain. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
www.itape.comAmerican® brand is a registered trademark of Intertape Polymer Group® Inc. The Refinish Solutions Group logo is a pending trademark of Saint-Gobain Abrasives.
American® brand TM27 TrimFast™ is specifically designed for flush mount and inset molding around windshields and other automotive glass. Perforated for easy cornering and eliminates the need for dangerous knives or razor blades. TM27 ensures clean removal from finished paint work without slivering, saving time and money!
PERFORMANCE ADVANTAGES
• Easy to apply and removes cleanly
• Two plastic strips for easy handling
• No release liner for faster installation and less waste
• Pre-folded edge allows ease of removal
• Two sizes in one!
THE PERFECT CHOICE FOR AUTO MOLDING PROTECTION!
Part # IPG Resource Size Case Qty
077922-00268 TM27..1 50mm x 10m (1.96in x 10.9yd) 24 rolls
IPG’s Hand Mask is a pre-folded, high density polyethylene masking film designed for multiple transportation applications. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying film from sticking.
PERFORMANCE ADVANTAGES
• Corona-treated so paint won’t flake off
• Durable film resists tearing; requires less tape
• Solvent resistant; no bleed-through
• Clings to surface, preventing overspray
• Designed to work with multiple hand dispensers
• 1" core fits most masking machinesin(mm) in the chart to the right indicates length of the material when unfolded.
PREVENT OVERSPRAY WITH IPG’s HAND MASK FILM!
Part # IPG Resource Size Roll Height Case Qty
087143-00214 HMF...24 24in x 180ft (609.6mm x 54.9m) 5.35in 12 rolls
087143-00215 HMF...36 36in x 90ft (914.4mm x 27.4m) 6.81in 12 rolls
087143-00216 HMF...48 48in x 180ft (1219.2mm x 54.9m) 8.78in 12 rolls
087143-00217 HMF…72 72in x 90ft (1828.8mm x 27.4m) 9.57in 12 rolls
087143-00218 HMF…99 99in x 90ft (2514.6mm x 27.4m) 13.0in 12 rolls
HAND MASK FILM519
An economical masking tape to meet the basic needs of a collision repair shop.
PERFORMANCE ADVANTAGES
• Temperature resistance: 180ºF (82ºC) for 1 hour
• UV resistant up to 5 hours
• Excellent adhesion to backing when layered
• Works with both solvent and waterborne paints
• Clean removal at ambient temperature; stain resistant; resists bleed-through
• Resists paint flaking
519 MEDIUM GRADE PAPER MASKING TAPE
U S AMADE IN THE Part # IPG Resource Size Case Qty
077922-73848 73848 18mm x 54.8m (0.70in x 60yd) 48 rolls
077922-73858 73858 24mm x 54.8m (0.94in x 60yd) 36 rolls
077922-73859 73859 36mm x 54.8m (1.41in x 60yd) 24 rolls
077922-73860 73860 48mm x 54.8m (1.88in x 60yd) 24 rolls
