TOTA
LIN
DU
STR
IAL
SOLU
TIO
N!!!
!
The leadingengineeringcompany providingtechnologicallyadvancedProducts &Servicesin adiversifiedmarket
WHY HANS ?TO
TAL
IND
UST
RIA
LSO
LUT
ION
!!!!
The leadingengineeringcompany providingtechnologicallyadvancedProducts &Servicesin adiversifiedmarket
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
HANDOPERATINBLOCKRTCH
ET LEVER HOISTS(LINRATCHET LEVERHOISTS (LINK CHAIN
TYPE)K CHAIN TYPE)S
• ERMETO ORIGINAL• TUBE FITTINGS• QUICK COUPLING(QRC)• HYDRAULIC BALL VALVE
Main Products
• SEAMLESS TUBES• TUBE CLAMPS
• HYDRAULIC VALVE & PUMPS
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
HANDOPERATINBLOCKRTCH
ET LEVER HOISTS(LINRATCHET LEVERHOISTS (LINK CHAIN
TYPE)K CHAIN TYPE)S• HYDRAULIC VALVE & PUMPS
• O-RING & SEAL KIT• PNEUMATIC VALVE ,CYL.• PU TUBE, & FITTINGS
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!TUBE FITTINGS ( ERMETO ORIGINAL)
TheTube Fittings Division Europe
• EO2-Plus (metric bite type with elastomericseal)
• EO2-FORM (formed tube with soft seal),• O-Lok® fitting (O-ring face seal) form the Dry
Technology “family”.• EO-Plus fitting (metric bite type),• 24° cone weld nipples,• Triple-Lok® fitting (37° flare)• Pipe Adapters are the metallically sealed group.
Ferulok fittings (inch tube bite type),• Intru-Lok (Brass flare less)• JIS fittings Tube Fittings
Division in the USA
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
TheTube Fittings Division Europe
• EO2-Plus (metric bite type with elastomericseal)
• EO2-FORM (formed tube with soft seal),• O-Lok® fitting (O-ring face seal) form the Dry
Technology “family”.• EO-Plus fitting (metric bite type),• 24° cone weld nipples,• Triple-Lok® fitting (37° flare)• Pipe Adapters are the metallically sealed group.
Ferulok fittings (inch tube bite type),• Intru-Lok (Brass flare less)• JIS fittings Tube Fittings
Division in the USA
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
! • Diagnostic Test Couplings are mainly used asMeasuring Sysytems for Pressure Monitoring offluid and gaseous pressure systems. & will provideease of flexibilities in positions & disctance
• Test couplings are used for gas filling valve fornitrogen accumulators for Military application
• Test couplings are used for gas pressure controlsystems as test points for gas & water industries.
• Test couplings & Test hoses are used up to 700 bar• Test couplimgs & hoses can used for venting in
hydraulic piping systems.• Test hoses are prepared from Polyamide materials
and temp. range up to -35 0 C to + 100 0 C• Test couplings are manufactured from Carbon
steel & stainless steel grades as per requirements.
SENSO CONTROL & TEST COUPLING
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
• Diagnostic Test Couplings are mainly used asMeasuring Sysytems for Pressure Monitoring offluid and gaseous pressure systems. & will provideease of flexibilities in positions & disctance
• Test couplings are used for gas filling valve fornitrogen accumulators for Military application
• Test couplings are used for gas pressure controlsystems as test points for gas & water industries.
• Test couplings & Test hoses are used up to 700 bar• Test couplimgs & hoses can used for venting in
hydraulic piping systems.• Test hoses are prepared from Polyamide materials
and temp. range up to -35 0 C to + 100 0 C• Test couplings are manufactured from Carbon
steel & stainless steel grades as per requirements.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYDRAULIC QUICK RELEASE COUPLING
Parker’s quick coupling division, established in1968, has beens upplying quality products to themarketplace since it’s inception. Withmanufacturing facilities on two continents,parker qcd manufactures hydraulic andpneumatic products designed to meet thedemanding requirements of a wide variety ofapplications in a host of markets includingagriculture, automotive, chemical, off-shore oil,pulp and paper, food processing, printing andpublishing, plastics, public utilities, construction,alternative fuels and others. Quick couplings areavailable in a variety of sizes and end configurations ranging from 1/8 inch to 2-1/2 inchesto accommodate broad spectrum of designrequirements. Pressure capabilities to15,000 psiworking pressure.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
Parker’s quick coupling division, established in1968, has beens upplying quality products to themarketplace since it’s inception. Withmanufacturing facilities on two continents,parker qcd manufactures hydraulic andpneumatic products designed to meet thedemanding requirements of a wide variety ofapplications in a host of markets includingagriculture, automotive, chemical, off-shore oil,pulp and paper, food processing, printing andpublishing, plastics, public utilities, construction,alternative fuels and others. Quick couplings areavailable in a variety of sizes and end configurations ranging from 1/8 inch to 2-1/2 inchesto accommodate broad spectrum of designrequirements. Pressure capabilities to15,000 psiworking pressure.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYDRAULIC 2/3 WAY BALL VALVE
The Parker High Pressure Ball Valve ProductLine serves in applications ranging from 3000 to10,000 PSI. Included in this section is the SeriesBVAL, especially designed for leak-freehydraulic suction and return line applications.
PARKER BALL valves are used for shut-offapplications and are rated at 414 Bar (6000PSI). The wide variety of porting options plusthe wide range of accessories make the BVHPthe choice for high pressure systems with portsup to 1".
Parker’s 2-way ball valves operate to either offor full flow by rotating the handle 90°. Ballvalves are not designed to be a metering orflow control device.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
The Parker High Pressure Ball Valve ProductLine serves in applications ranging from 3000 to10,000 PSI. Included in this section is the SeriesBVAL, especially designed for leak-freehydraulic suction and return line applications.
PARKER BALL valves are used for shut-offapplications and are rated at 414 Bar (6000PSI). The wide variety of porting options plusthe wide range of accessories make the BVHPthe choice for high pressure systems with portsup to 1".
Parker’s 2-way ball valves operate to either offor full flow by rotating the handle 90°. Ballvalves are not designed to be a metering orflow control device.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYDRAULIC PUMP & SOLENOID VALVE
HYDRAULIC PUMP -Rugged low cost pumps with allparts renewable by replacement. Oil immersed type,open execution, face mounting, valve controlled, fixeddelivery, bi-directional rotation of shaft. For coupling thepumps to the electric motors standard bell housingassemblies are available. Available with three pumpingelements.
SOLENOID VALVE -Parker’s valve offering includeshydraulic, pneumatic, instrumentation, refrigeration andaerospace in a variety of types and variousconfigurations. Parker valve brand names includeApitech, Color flow, Commercial, Denison, Gresen, IQAN,Manatrol, Manapak, Schrader Bellows, Republic, SinclairCollins, Skinner, Sporlan and Sterling. Parker valve typescan be manual, motor actuated or solenoid operatedwhile mounting configurations can be sub-based, in-lineor manifold.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
HYDRAULIC PUMP -Rugged low cost pumps with allparts renewable by replacement. Oil immersed type,open execution, face mounting, valve controlled, fixeddelivery, bi-directional rotation of shaft. For coupling thepumps to the electric motors standard bell housingassemblies are available. Available with three pumpingelements.
SOLENOID VALVE -Parker’s valve offering includeshydraulic, pneumatic, instrumentation, refrigeration andaerospace in a variety of types and variousconfigurations. Parker valve brand names includeApitech, Color flow, Commercial, Denison, Gresen, IQAN,Manatrol, Manapak, Schrader Bellows, Republic, SinclairCollins, Skinner, Sporlan and Sterling. Parker valve typescan be manual, motor actuated or solenoid operatedwhile mounting configurations can be sub-based, in-lineor manifold.
PARKER SOLENOID VALVE
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!Parker 7321B/7322B 2/2 pilot operated valvesisthe best solution anywhere a perfectcontrolmedia such water, steam, and lightoils isrequired.
Valve body: CW617N UNI EN 12165:98 ForgedBrassEnclosing tube: AISI 304 stainless steelPlunger: AISI 430F St. SteelSpring: AISI 302 St. SteelSeals: NBR (Buna N) - EPDMFKM (Viton)Shading ring: CopperMaterial Specifications : The valves can bemounted in any position. It is howeverrecommended to install them with the coilinvertical position above the body.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!Parker 7321B/7322B 2/2 pilot operated valvesisthe best solution anywhere a perfectcontrolmedia such water, steam, and lightoils isrequired.
Valve body: CW617N UNI EN 12165:98 ForgedBrassEnclosing tube: AISI 304 stainless steelPlunger: AISI 430F St. SteelSpring: AISI 302 St. SteelSeals: NBR (Buna N) - EPDMFKM (Viton)Shading ring: CopperMaterial Specifications : The valves can bemounted in any position. It is howeverrecommended to install them with the coilinvertical position above the body.
E-mail us at [email protected] us at 91-011-23270857, 09211783789
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
! Parker offers the world's most extensivepneumatic product lines. Parker offersthe best engineering assistance to helpin every stage of your design. Local,lean manufacturing facilities in fourcontinents assure you the most rapiddeliveries in the industry. Globaltechnical assistance is a phone call oremail away.With extensive engineering expertise inmotion and control, market leadingbreadth of product, and unequaledglobal distribution, Parker providesinnovative components and completesystems to customers worldwide.Parker partners with customers toimprove their productivity andprofitability..
PARKER PNEUMATICS PRODUCTTO
TAL
IND
UST
RIA
LSO
LUTI
ON
!!!! Parker offers the world's most extensive
pneumatic product lines. Parker offersthe best engineering assistance to helpin every stage of your design. Local,lean manufacturing facilities in fourcontinents assure you the most rapiddeliveries in the industry. Globaltechnical assistance is a phone call oremail away.With extensive engineering expertise inmotion and control, market leadingbreadth of product, and unequaledglobal distribution, Parker providesinnovative components and completesystems to customers worldwide.Parker partners with customers toimprove their productivity andprofitability..
E-mail us at [email protected] us at 91-011-23270857, 09211783789
Parker Tube clamps according to DIN 3015The clamp bodies are available in thesematerials ex store- Polypropylene (dark green colour)- Polyamide (black colour)- Solid rubber (black colour)- AluminiumUpper and lower clamp halves are identical.The inside of the clamp is available with orwithout webs.Webs on the inside of theclamps have a vibration and impact reducingeffect and absorb force towards the directionof the tube axis. A spacing between bothhalves produces the bias of the tube.For the support of hoses and cables werecommend to use clamps with an even insidewithout bias. The spacing measure s1 is notrequired. Thus, the block height h1 is reduced.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYD. TUBE CLAMPS
Parker Tube clamps according to DIN 3015The clamp bodies are available in thesematerials ex store- Polypropylene (dark green colour)- Polyamide (black colour)- Solid rubber (black colour)- AluminiumUpper and lower clamp halves are identical.The inside of the clamp is available with orwithout webs.Webs on the inside of theclamps have a vibration and impact reducingeffect and absorb force towards the directionof the tube axis. A spacing between bothhalves produces the bias of the tube.For the support of hoses and cables werecommend to use clamps with an even insidewithout bias. The spacing measure s1 is notrequired. Thus, the block height h1 is reduced.
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857,23287606
Parker offers the widest range of specialty,industrial, hybrid and hydraulic hose in theindustry.Low pressure, medium pressure and highpressure pneumatic and hydraulic hose that isheat, ozone and weather resistant, chemicalresistant, oil and flame resistant, UV resistantand abrasion resistant is available fromParker.Parker’s pneumatic and hydraulic hose ismanufactured to meet or exceed industrialspecification requirements of SAE, DOT,USCG, Available in 3/16 inches to 3 inches I.D.High pressure to medium pressure braidedHydraulic hosesWire braided – SAE 100R1, R2, R3, R6,4SP,4SH,R9,R12,R13,R15
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYDRULIC HOSES
Parker offers the widest range of specialty,industrial, hybrid and hydraulic hose in theindustry.Low pressure, medium pressure and highpressure pneumatic and hydraulic hose that isheat, ozone and weather resistant, chemicalresistant, oil and flame resistant, UV resistantand abrasion resistant is available fromParker.Parker’s pneumatic and hydraulic hose ismanufactured to meet or exceed industrialspecification requirements of SAE, DOT,USCG, Available in 3/16 inches to 3 inches I.D.High pressure to medium pressure braidedHydraulic hosesWire braided – SAE 100R1, R2, R3, R6,4SP,4SH,R9,R12,R13,R15
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
Parker offers a wide variety of seals which consist ofcomposite seals, metal seals, molded seals, PTFEseals and rotary shaft seals. From the near-absolutevacuum of space to the pressure of 30,000 psioilfield applications, temperatures from the cold ofcryogenic temperatures or the heat of a turbine jetengine, Parker seals can handle the mostchallenging applications known to man.
Parker seals include significant ranges of custommolded or machined shapes, diaphragms, anddirectional valve seals, over-molded and press-in-places seals.Hydraulic sealing systems for earthmoving/construction machinery, agriculturemachinery, agricultural/forestry machinery, materialhandling, industrial hydraulics, vehicle engineeringand mining.TO
TAL
IND
UST
RIA
LSO
LUTI
ON
!!!!
SEALS, ORING KIT
Parker offers a wide variety of seals which consist ofcomposite seals, metal seals, molded seals, PTFEseals and rotary shaft seals. From the near-absolutevacuum of space to the pressure of 30,000 psioilfield applications, temperatures from the cold ofcryogenic temperatures or the heat of a turbine jetengine, Parker seals can handle the mostchallenging applications known to man.
Parker seals include significant ranges of custommolded or machined shapes, diaphragms, anddirectional valve seals, over-molded and press-in-places seals.Hydraulic sealing systems for earthmoving/construction machinery, agriculturemachinery, agricultural/forestry machinery, materialhandling, industrial hydraulics, vehicle engineeringand mining.TO
TAL
IND
UST
RIA
LSO
LUTI
ON
!!!!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
Parker offered thread flanges are designed asper iso 6162 - 3000 psi series & 6000 psi seriesonly.thread flanges are used for hose assemblywhere easy removal piping can be possible within close areathread flanges are in 2 halves attached withweld nozzle with allen bolts , nuts & o ring seal.
sae thread flanges are in moc - steel , stainlesssteelsae thread flanges are assembled with splitflanges ormono flanges or flat butt type flanges with tubeto weld on both side with allen bolts & nuts.sae thread flangesstatic pressure for 3000 psi & 6000 psi series.sizes available - 1/4 " nb up to 5 " nb
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!HYDRAULIC SAE FLANGES
Parker offered thread flanges are designed asper iso 6162 - 3000 psi series & 6000 psi seriesonly.thread flanges are used for hose assemblywhere easy removal piping can be possible within close areathread flanges are in 2 halves attached withweld nozzle with allen bolts , nuts & o ring seal.
sae thread flanges are in moc - steel , stainlesssteelsae thread flanges are assembled with splitflanges ormono flanges or flat butt type flanges with tubeto weld on both side with allen bolts & nuts.sae thread flangesstatic pressure for 3000 psi & 6000 psi series.sizes available - 1/4 " nb up to 5 " nb
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857, 09211783789
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
Material: 1.4571 (X6CrNiMoTi17122)Tensile Strength: 500 N/mm2(72,500 lb/in2) minimumYield Strength:245N/mm2(35,500 lb/in2) minimum%Elongation: 35%minimumCondition:Seamless,cold drawn, free of scale, heat-treated inaccordance with DIN 17458outside diameter (mm), 2 = wall thickness(mm), and 71 indicates 1.4571 stainlesssteelStatic pressures are calculated inaccordance with DIN 2413 Part 1.Dynamic pressure ratings are calculated inaccordance with DIN 2413 Part 3.Specificdesign factors may be determined by usingthe burst pressures shown in the above table.
HYDRAULIC SEAMLESS TUBESTO
TAL
IND
UST
RIA
LSO
LUTI
ON
!!!!
Material: 1.4571 (X6CrNiMoTi17122)Tensile Strength: 500 N/mm2(72,500 lb/in2) minimumYield Strength:245N/mm2(35,500 lb/in2) minimum%Elongation: 35%minimumCondition:Seamless,cold drawn, free of scale, heat-treated inaccordance with DIN 17458outside diameter (mm), 2 = wall thickness(mm), and 71 indicates 1.4571 stainlesssteelStatic pressures are calculated inaccordance with DIN 2413 Part 1.Dynamic pressure ratings are calculated inaccordance with DIN 2413 Part 3.Specificdesign factors may be determined by usingthe burst pressures shown in the above table.
E-mail us at [email protected] us at 91-011-23270857, 09211783789
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!PARKER HANS INDIA
TOTA
LIN
DU
STRI
AL
SOLU
TIO
N!!!
!
E-mail us at [email protected] us at 91-011-23270857,09211783789