P:262.242.1420 | [email protected]| Last Revised: 4/13/2021 | Design Rights Reserved | AIW8274 | 1 of 4 Harbor - Double Bars AIW8274 25 in PROJECT DETAILS JOB NAME: TYPE: NOTES: DESCRIPTION The Harbor sconce is available with varying levels of ornamentation to adapt to many types of spaces and to meet a range of budgets. The fixture adds four horizontal bars for adornment, while still retaining the clean lines of the Harbor series. FEATURES & BENEFITS Compliant with Americans with Disabilities Act (ADA) requirements ● Optional VAN (vanity mount) features solid end caps for a fully enclosed fixture ● Exterior family fixtures available to carry a consistent lighting design throughout a project ● Handcrafted in USA ● SPECIFICATIONS LIGHT SOURCE: White LED light engine ● LUMEN MAINTENANCE: L70 = >50,000 Hrs. ● CCT: 3000K, 3500K, or 4000K ● DRIVER: Integral Class II power supply standard ● DIMMING: 0-10V controls standard to 10% on LED light engines ● EMERGENCY: Emergency battery remote optional ● DIFFUSER: Formed opal acrylic lens standard; matte acrylic optional. Prismatic top lens and bottom lens standard with any LED module. They shield direct view of the lamp in applications where views above or below the fixture are possible and prevent external objects from entering the fixture. ● MOUNTING: Mounts to standard 4" octagonal junction box ● MODIFICATIONS: Consult factory for all modification requests ● APPROVALS: ETL listed to UL standards (US & Canada) for use in damp locations; not recommended for exterior applications ●
Transcript
P:262.242.1420 | [email protected] | Last Revised: 4/13/2021 | Design Rights Reserved | AIW8274 | 1 of 4
Harbor - Double BarsAIW8274 25 in
PROJECT DETAILSJOB NAME: TYPE: NOTES:
DESCRIPTION
The Harbor sconce is available with varying levels of ornamentation toadapt to many types of spaces and to meet a range of budgets. Thefixture adds four horizontal bars for adornment, while still retainingthe clean lines of the Harbor series.
FEATURES & BENEFITSCompliant with Americans with Disabilities Act (ADA)requirements
●
Optional VAN (vanity mount) features solid end caps for a fullyenclosed fixture
●
Exterior family fixtures available to carry a consistent lightingdesign throughout a project
●
Handcrafted in USA●
SPECIFICATIONSLIGHT SOURCE: White LED light engine●
LUMEN MAINTENANCE: L70 = >50,000 Hrs.●
CCT: 3000K, 3500K, or 4000K●
DRIVER: Integral Class II power supply standard●
DIMMING: 0-10V controls standard to 10% on LED light engines●
EMERGENCY: Emergency battery remote optional●
DIFFUSER: Formed opal acrylic lens standard; matte acrylicoptional. Prismatic top lens and bottom lens standard with anyLED module. They shield direct view of the lamp in applicationswhere views above or below the fixture are possible and preventexternal objects from entering the fixture.
●
MOUNTING: Mounts to standard 4" octagonal junction box ●
MODIFICATIONS: Consult factory for all modification requests●
APPROVALS: ETL listed to UL standards (US & Canada) for usein damp locations; not recommended for exterior applications
●
P:262.242.1420 | [email protected] | Last Revised: 4/13/2021 | Design Rights Reserved | AIW8274 | 2 of 4
DIMENSIONS
W7 in17.8 cm
H25 in63.5 cm
D4 in10.2 cm
MC12.5 in31.8 cm
Mounting WeightApproximate: 25 lb (12 kg)
CONFIGURATORTo configure your spec sheet online, go to www.spilighting.com/AIW8274. Not all options are available in all configurations; consult factory fordetails.
To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LEDlampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based onapplication.
L22W | White 22W LED Light Engine| Delivered Lumens: 1,501
L43W | White 43W LED Light Engine| Delivered Lumens: 3,002
