20.08.02-15 Silver 72 x 14mm 10.5 / 14kg min. 18mm
Different sizes & finishes are also available from a range of suppliers on request.
■ Easy installed by screw-fixing■ 90° opening angle■ To hinge one overlay door, side or centre panel mounted or one inset door, side panel mounted■ Minimum door thickness; 16mm Side panel thickness; 16-22mm
HH
D35
2
# (mm)
Antique BrassHHD621 50 x 28HHD622 64 x 35 Satin ChromeHHD615 50 x 28HHD616 64 x 35HHD617 76 x 41HHD618 102 x 60
# (mm)
Polished ChromeHHD380 25 x 16HHD381 38 x 22HHD382 51 x 29HHD383 64 x 35HHD384 76 x 41HHD385 102 x 60
More finishes availableHH
D58
9
HH
D58
1
| 221
Hardware & FittingsHinges
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfi xservices.com
Counterfl ap Hinge Light-Duty Continuous Steel Hinge
Hinge Screws
#HHD364 Polished Brass 102 x 38mmHHD609 Polished Chrome 102 x 38mmHHD610 Satin Chrome 102 x 38mm
# Electro BrassKEH395 1800 x 25mmKEH396 1800 x 32mmKEH397 1800 x 38mm
# Florentine BronzeKEH814 1800 x 32mm
# Zinc PlatedKEH398 1800 x 25mmKEH399 1800 x 32mmKEH400 1800 x 38mm
#
Craft PackR2CC3010H 3.0 x 10mmR2CC3012H 3.0 x 12mmR2CC3016H 3.0 x 16mmR2CC3020H 3.0 x 20mmR2CC3025H 3.0 x 25mm
#
Industry PackR2CI3010H 3.0 x 10mmR2CI3012H 3.0 x 12mmR2CI3016H 3.0 x 16mmR2CI3020H 3.0 x 20mmR2CI3025H 3.0 x 25mm
■ Countersunk yellow woodscrews with a reduced head to better suit smaller hinge holes■ Very sharp 25° point for immediate start■ Yellow Tropicalised
We Can Also Supply:Hardware & Fittings From Other Brands
We stock many of the leading brands in the industry such as Hafele, Hettich and Fingertip Design, to bring you the very best in quality hardware and fi ttings for cabinet and furniture makers. But we can also supply so much more!
From hinges and catches to draw runners and ironmongery, we can supply almost anything you require from brands such as Hafele, Blum, Grass, Accuride and many more.
For more information on how we can help, please discuss your requirements with a member of our team.
08001 613613
A simple, honest and quality service that you can rely on.
Max Load Capacity: 25kgMax Drawer Width: Installation Width minus 25mm
■ Side mounted ball bearing drawer runners with soft close. Dismountable.■ Runner thickness: 12.7mm ■ 450-600mm full extension
■ Bottom mounted drawer runners with soft close. Complete with clips.■ Easy mounting with 3mm height adjustment
#
KNZ1002 250mmKNZ686 300mmKNZ687 350mmKNZ688 400mm
#
KNZ689 450mmKNZ690 500mmKNZ691 550mmKNZ1003 600mm
#
KHZ960 300mmKHZ961 350mmKHZ962 400mmKHZ963 450mm
#
KHZ964 500mmKHZ965 550mmKHZ966 600mm
Max Load Capacity: 35kg
Max Load Capacity: 30kgMax Drawer Width: Installation Width minus 25mm
| 223
Hardware & FittingsDrawer Runners
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfi xservices.com
■ Side mounted, slide on installation with catches and tool-less height adjustment.■ Integrated Silent System soft close■ Suitable for drawers with a side profi le thickness of up to 16 mm■ Front clips off er height adjustment up to +2mm
Hettich Quadro V6 Drawers RunnersSilent System
Hettich Quadro V6 Drawers RunnersPush-To-Open
■ Side mounted, slide on installation with catches and tool-less height adjustment.■ Integrated push-to-open opening mechanism■ Suitable for drawers with a side profi le thickness of up to 16 mm■ Front clips off er height adjustment up to +2mm
■ Beech wood biscuits that expand on contact with a woodworking adhesive■ Ideal for strong, fast, and accurate jointing
Festool DOMINOBeechwood Dowels
■ Domino mortise and tenon joining system
■ Optimized to deliver maximum joint strength
■ Makes fl awless mortises every single time
■ Domino Tenons are 100% rotation-proof & far stronger than either biscuits or dowels
# QTY (Box)
To suit DF500FES495661 4 x 20mm 450FES494938 5 x 30mm 300FES494939 6 x 40mm 190FES494940 8 x 40mm 130FES494941 8 x 50mm 100FES494942 10 x 50mm 85
Fluted Beech Dowels■ Ideal for joining panels in the production of cabinet carcasses and doors.
Beech Dowels#
KBZ454 5 x 25mmKBZ457 5 x 30mmKBZ462 5 x 40mmKBZ455 6 x 25mmKBZ458 6 x 30mm
#
KBZ463 6 x 40mmKBZ456 8 x 25mmKBZ459 8 x 30mmKBZ461 8 x 35mmKBZ464 8 x 40mm
#
KBZ467 8 x 50mmKBZ465 10 x 40mmKBZ468 10 x 50mmKBZ466 12 x 40mm
Biscuit Jointer Cutter SetTrend CraftPro Series
B B1: 15mm B2: 19mm B3: 23mmC 4mmD 40mm
#
TRE342X1/4TC ¼”TRE342X1/2TC ½”
Biscuit Joint CutterTrend Pro Series
B B: 12.7mm B2: 16mm B3: 19mmC 4mmD 37.2mm
#
TRE152X1/4TC ¼”TRE152X1/2TC ½”
Size 0 47 x 15mm Size 10 53 x 19mm Size 20 56 x 23mm
# QTY
FES498686 8 x 750mm 36FES498687 10 x 750mm 28FES498688 12 x 750mm 22FES498689 14 x 750mm 18
Festool DOMINOXL Beechwood Dowels, for DF700
Festool DOMINO Cutters
#
To suit DF500FES495663 4mmFES493490 5mmFES493491 6mmFES493492 8mmFES493493 10mm
#
To suit DF700FES497868 8mmFES497869 10mmFES497870 12mmFES497871 14mm
# QTY (Box)
To suit DF700FES498213 8 x 100mm 150FES498215 10 x 100mm 120FES498216 12 x 100mm 100FES498218 14 x 100mm 80
| 225
Hardware & FittingsJoint Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com 08001 613613 www.toolfixservices.com
Pioneering wood joining
simple ingenuityHigh-end jointing system solutions.
“ Lamello’s system solutions are synonymous with quality, innovation and excellent functionality, and are used across the globe where they have proven their worth millions of times over!
Lamello is a leading manufacturer of innovative profile groove joining systems, offering everything from the original tried-and-tested wooden biscuit to precision joining systems such as their P-System.
Classic XThe original biscuit jointer for any workshop
Lamello Classic XOriginal Biscuit Jointer
Power/Voltage 780W, 230VSpeed 10,000min-1
Cutter Carbide TippedCutter Ø 100 x 4 x 22 Teeth Z6 (3+3) with reversing teethCutting Depth 20mm max
Power/Voltage 1050W / 230VSpeed 9000min-1
Cutter Carbide TippedCutter Ø 100 x 4 x 22 Teeth Z2 + V4 with scoring teethCutting Depth 20mm max
Top 21The original biscuit jointer with height-adjustable cutter
Lamello Top 21Height Adjustable Biscuit Jointer
■ Powerful 780W motor
■ Base plate is flush on both sides for efficient position- ing on the workpiece
■ High precision machine guide and application surfaces
■ Multifunctional stop square
■ Versatile uses
■ Swivelling front stop 0-90°
■ 6 standard depths
■ Height adjustable cutter, scale +/- 2mm in 0.1mm increments. Total 4mm■ Adjust groove position to exact centre of the work piece (materials 8-24mm)■ Easy joining of laterally off-set workpieces■ Base plate is flush on both sides for efficient position- ing on the workpiece■ Multifunctional stop square■ Precision cutter with 4 scoring teeth and hub
| 227
Hardware & FittingsLamello Joint Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
Zeta P2The machine for the installation of the evolving P-System
.Sek.seconds50 Sek
2. Drill
2. Insert
Time for one connector pair
Ready in
1. Cut
2. Drill
3. Insert
4. Connect –
finished!
Time for one connector pair
Ready in
25
15
1. Cut
2. Insert
3. Apply glue
4. Connect –
finished!
5
5
50 s
25
5
5
5
40 s
3. Insert
3. Apply glue
4. Connect – finished!
4. Connect – finished!
1. Cut
1. Cut
Connected in seconds with Clamex – detachable
Connected in seconds with Tenso – glued
5500
Fastest joining system with a power toolConnection is complete within seconds, without waiting time, clamps, or secondary processes
Lamello Zeta P2For P-System
#LAM101402D c/w Diamond Cutter + Systainer
Power/Voltage 1050W / 230VSpeed 9000min-1
Cutter Diamond TippedP-System Cutter Ø 100 x 7 x 22 Cutting Depth 20mm max
A simple, honest and quality service that you can rely on.
The P-System is based on a groove with an undercut, into which connectors with various functions can be inserted. Quick manual insertion without the need for glue or screws whilst ensuring form-locking anchorage.
During the process, the cutter moves downwards to the maximum depth and moves sideways in order to create the profile groove.
P-SystemForm-Locking anchorage, without tools.
StrongForm-locking anchorage across large surface areas
Lateral tolerancePerfect, flush alignment of both workpieces
Shallow DepthMinimal cutting depth with maximum tensile strength
No TwistingPositioning pins prevent twisting without dowels
Fast InstallationInserting instead of screwing or gluing
Manual InsertionQuick insertion without the need for screws of glue.
Joining with the P-System:
| 229
Hardware & FittingsLamello Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
Size 64 x 13.5 x 9.7mm / 52 x 7.5 x 9.7mm Cutter Ø 100.4 x 7 x 22
P-System Drill Jig
#LAM125344
Clamex P Assembly Tool
#LAM251993
45° Cover CapsPack of 100
■ Clamex cover caps to cover the Clamex P drill holes
■ Flexible screwdriver with 4mm hex
The Clamex P range offers detachable furniture fittings with a small 6mm opening, based on the P-System anchorage and connected with a lever. P-System allows for an exceptionally fast and powerful anchorage in the work piece without tools.
Clamex PDetachable connector with a small opening.
90° Cover CapsPack of 100
Detachable
Aesthetic
High clampingforce
Stackable
Versatile
Fast installation
Lateral tolerance
A simple, honest and quality service that you can rely on.
Bisco P is a plastic aligning element which fits into the 7mm P-System groove. It is an ideal addition to Clamex P and suitable for dry-assembly before gluing a joint with Tenso P.
Bisco PAligning element for Clamex P-14 and Tenso P-14
Tenso P is a self-clamp connector intended for use as a gluing aid, boasting very high levels of clamping force allowing work pieces to be glued without screw clamps or pressure.
Tenso PSelf-clamping connector as a gluing aid, for all angles.
*Without Preload Clip.
| 231
Hardware & FittingsLamello Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
Divario P-18
#LAM145550 80 PairsLAM145560 300 Pairs
Size (P-System) 65 x 16 x 9.7mm Size (Drill Holes) Ø 8 x 9mm, distance 32mm Cutter Ø 100.4 x 7 x 22
Further Lamello AccessoriesCarbide Tip Groove CutterZ2+V4
Carbide Tip Groove CutterZ6 Alternating
Included
Divario P is a self-clamping connector for slide insertion, joining and clamping when inserted to offer a completely invisible joint. Shelves or seperation walls can be inserted into pre-assembled structures, such as on-site after transportation.
Divario PSelf-clamping, invisible connector for slide insertion.
■ For Zeta, Top 20, Top 21, Classic ■ For Classic
#LAM132000
#LAM132106
#LAM132140
#LAM132141
Diamond Tipped Blade for Zeta
Carbide Tipped Blade for Zeta
■ For Zeta P2■ Approx 10,000 Cuts. Cannot be resharpened.
■ For Zeta P2■ Approx 1,000 Cuts + 800 cuts after resharpening
A simple, honest and quality service that you can rely on.
■ Ideal for dividing panels from 16mm and corner joints from 12mm
CabineoThe CNC connector of the future!
#LAM186305
Cabineo 1212mm Screw
#LAM186320 White 500 PiecesLAM186321 White 2000 PiecesLAM186330 Black 500 PiecesLAM186331 Black 2000 Pieces
Cabineo Cover Caps
#LAM186350S Signal White (RAL 9003) 100pcLAM186350P Papyrus White ( RAL 9018) 100pcLAM186350B Brown Beige (RAL 1011) 100pcLAM186350F Window Grey (RAL 7040) 100pcLAM186350A Mouse Grey (RAL 7005) 100pcLAM186350T Jet Black (RAL 9005) 100pc
Cabineo is a one-piece cabinet unit fitting installed into a drilled or routed. Machining happens in the surface (no edge drilling), meaning Cabineo can be used with all kinds of CNC machines, including simple 3 axis & nesting machines.
LAM186350S
LAM186350B
LAM186350F
LAM186350T
Cabineo Hex Bit
#LAM276312 with Hex End EachLAM276302 w/o Hex End Pack of 100
■ Cabineo Hex Drive Bit for rapid assembly or disassembly of furniture built with Lamello Cabineo■ Extra long ball-end hex bit with ¼” shank
Surface machining with all CNC machines! Insert one-piece connector Simple, fast assembly!
Cabineo 88mm Screw
#LAM186310 White 500 PiecesLAM186311 White 2000 PiecesLAM186340 Black 500 PiecesLAM186341 Black 2000 Pieces
Size 33.8 x 16.5 x 10.8mm Screw Black 8mm Screw
Size 33.8 x 16.5 x 10.8mm Screw Nickel Plated 12mm Screw
■ Cabineo 8 + 12 (40pcs each), Hex Bit & White Cover Caps
Cabineo Starter Set
Size 33.8 x 16.5 x 10.8mm Screw Black 8mm / Nickel Plated 12mm
| 233
Hardware & FittingsLamello Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
Invis Mx2Invisible as if glued, versatile as if screwed!
Invis Mx2 Starter Set Invis Mx2 Connector14mm Stud
Invis Mx is the unique connection that satisfies the highest demands for aesthetics, stability and productivity. With no visible openings, Invis Mx can be quickly detached and reconnected at any time via its magnet drive.
Screw the connector into the pre-drilled hole.
Screw in the stud vertically using the insertion jig
Join and clamp using the MiniMag Mx2
More from the Lamello RangeYou can find our core range of Lamello products in our catalogue and online, however as a Lamello System Partner we are able to supply the entire range of precision joining systems, power tools and accessories - as well as arrange for product demonstrations and training if required!
To learn more about the range and what we can supply, simply discuss your requirements with a member of our team.
08001 613613
A simple, honest and quality service that you can rely on.
■ With one keyhole, for hooking into raised head countersunk screw
#
FFD482 Brass 8 x 1”FFD481 Chrome 8 x 1”FFD483 Chrome 8 x 1¼”FFD485 Chrome 8 x 1½”
A simple, honest and quality service that you can rely on.
Hardware & FittingsConnecting Bolts
238 | sales@toolfi xservices.com 01733 316790
■ Bolts designed to securely join two worktops or panels together■ The nut (requires 10mm spanner) is tightened onto the bolt which pulls the worktops or panels together
■ 164mm in length - same size as standard worktop connectors■ Suits standard jigs■ Suitable for joining tops 28mm+
■ 100mm in length■ Suits standard jigs■ Low profi le 12.5mm thick gear housing■ Ideal for joining thin tops (16mm-25mm)
■ Bolts designed to securely join two worktops or panels together■ The nut (requires 10mm spanner) is tightened onto the bolt which pulls the worktops or panels together
Quaytech Zipbolt100mm Mini Worktop Connector
#
KLZ703 100mm
#
KLZ704 170mm SingleKLZ705 170mm Pack of 3 + Hex Bit
Quaytech ZipboltStandard Worktop Connector
#
KEZ346 150mm
Worktop Connecting BoltShort Connecting Bolt
#
KEZ956 65mm
Can’t fi nd what you’re looking for?
If you cannot fi nd the product you are looking for in our catalogue, then please get in touch.
Simply discuss your requirements with our team of expert advisers and we’ll do everything possible to source the exact product you require.
08001 613613
■ 150mm in length■ Suits standard jigs■ Low profi le 12.5mm thick gear housing■ Ideal for joining thin tops (16mm-25mm)
#
KLZ711 150mm
Quaytech Zipbolt150mm Mini Worktop Connector
Save time and money when assembling with the ZIPBOLT Connector.
Off ering the fastest and easiest way of joining worktops and panels in a matter of seconds! The Zipbolt requires a simple 5mm allen key or hex bit as a driving tool and this ensures a very positive engagement.
■ Simple, quick & one-handed!■ Perfect join every time■ Can be used with a cordless drill or impact driver
TENSION IN SECONDSWhen using a cordless drill or impact driver
PERFECT JOIN EVERY TIMESimple, quick and one-handed!
| 239
Hardware & FittingsConnecting Bolts
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
■ Using the Zipbolt gearbox design to offer a super fast way of securing the newel post to the ground or wooden joist
■ Using the Zipbolt gearbox design to offer a super fast way of joining continuous handrail to handrail applications and fixing flutes, goose necks and ramps to handrail.
■ Using the Zipbolt gearbox design to offer super quick mitre joints between 80 - 180°■ Ideal for corner applications and staircases
■ Using the Zipbolt gearbox design to offer super quick mitre joints between 80 - 180°■ Ideal for joining the handrail to the newell post
Quaytech ZipboltStraight Rail Bolt Connector
Quaytech Zipbolt MaxiFull Mitre Hand Rail Connector
Quaytech Zipbolt MaxiHalf Mitre Hand Rail Connector
Newell Post#
KLZ710 M12 x 300mm
Rail Bolt#
KLZ700 M8 x 90mm
Zipbolt Maxi#
KLZ709 M8 x 135mm
Zipbolt Maxi#
KLZ707 M8 x 135mm
Quaytech ZipboltNewell Post Fastener
Quaytech ZipboltStraight Slipfix Kit
Zipbolt Slipfix Kit - Straight#KLZ701
Zipbolt Cabinet Connector#
KLZ702 6 x 43mm
Quaytech ZipboltCabinet Connector
Quaytech ZipboltAngled Slipfix Kit
Zipbolt Slipfix Kit - Angled#KLZ708
The Slipfix System from Quaytech, is designed specifically for attaching handrails between two fixed newel posts in both straight and angled applications maintaining a traditional appearance.
In addition, the Quaytech Rail Bolt and Mitre Connectors provide additional solutions to joining staircase handrails.
Thanks to its unique design the fixing is concealed, eliminating the need for cover caps.
THE PERFECT SOLUTIONFor connecting handrails and newel posts
PERFECT JOIN EVERY TIMESimple, quick and one-handed!
A simple, honest and quality service that you can rely on.
Hardware & FittingsPanel Connectors
240 | sales@toolfi xservices.com 01733 316790
■ Helps to quickly and accurately install Type 1 Button-Fix
■ Suitable for use with Ø5mm countersunk wood screws
Button-Fix ConnectorType 1 - Flush Fit
Button-Fix ConnectorType 2 - 90° Connector
Button-Fix Marker Tool
Button-Fix Multi Jig Button-Fix Button
#KHZ984 2pc Set
#KHZ986 2pc Set
#KHZ985 2pc Set
Button-Fix Safety Cord
#KHZ720
#KHZ722
#KHZ718
■ Designed to help rebate Button-Fix Type 1■ H190 x W260 x 8.0mm
Button-Fix Marker Stud
#KHZ719
#KHZ721
■ For connecting parallel panels where strength is paramount. Simply bring the panels together and slide it to snap and lock into place.■ Ideal for cabinet end panels or decorative architectural panels
The invisible panel fi xing system that securely locks with a ‘click’.
Button-fi x is an award winning panel fi xings concept, which off ers an easy, accurate and secure method of invisibly attaching panels, signage and objects to walls, ceilings and other surfaces.
The concept utilises durable nylon buttons attached to the back of one panel and fi xture plates on the other. Once the panels are brought together, Button-Fixes then connect with the fi xtures to create secure cabinet and panel joinery that snaps together simply by sliding until they ‘click’ into place.
■ For connecting 90° panels where easy access is paramount. Simply bring the panels together and engage with a straight push■ Great for things like front facing panels such as bath panels.
Button-Fix ConnectorType 1 - Surface Mounted
■ Helps with the accurate installation of Type 2 Button-Fix
■ For connecting parallel panels where panel-to-panel contact is required. Simply bring the panels together and slide it to snap and lock into place.■ Oval rebate measuring 22 x 56 x 8mm is required
■ Panel fi xing made easy
■ Versatile, strong and fi tter-friendly
■ Fix panels at lightning speed
■ Ideal for cabinet panels, decorative architectural panels, access panels and much more!
The Button-fi x concept is simple: durable nylon Fixes are attached to the back of one panel and the mating Buttons are attached to the other. Bring the panels together and slide until the Button-fi xes ‘click’.
| 241
Hardware & Fittings Panel Connectors
A simple, honest and quality service that you can rely on. 08001 613613 www.toolfixservices.com
Keku Panel Clip#KJZ606 Without Lip
Keku Panel Clip Keku Panel Clip
Keku Panel Clip
Keku Panel Clip Keku Panel Clip
Keku Panel Clip#KJZ607 With Lip
Keku Panel Clip#KJZ608 Groove Mounted
Keku Panel Clip#KJZ609 Surface Mounted
Keku Panel Clip#KJZ611 Angled
Keku Panel Clip
Keku Panel Clip#KJZ612
Keku Panel Clip
Keku Panel Clip#KJZ613
Keku Panel Clip
Keku Panel Clip#KJZ614
A simple, honest and quality service that you can rely on.
#KLZ363 50mm Matt NickelKLZ364 60mm Matt NickelKLZ365 70mm Matt NickelKLZ367 60mm Matt BrassKLZ368 70mm Matt BrassAngled Strike PlateKHZ359 BrassKHZ360 Nickel
#
KJZ553 22mm Keyed To Diff erKJZ554 27mm Keyed To Diff erKJZ555 32mm Keyed To Diff er
