14.53 hrs 3 pcs f 0.20 mm 0.30 mm k 0.40 mm h 1 186.00 g d MK3/S Summary Print this original Haribo portion dispenser to avoid the biggest issue you’ll face while assembling a Prusa i3 MK3S kit - inadequate bear consumption. This precision engineered tool is even more practical than the allen key with the little ball on the end. Just seat your bears on the carousel of progress and success is guaranteed! Attach the exclusive “bear cave” cover to protect against nearby gummi predators. Resist the temptation to plaster your heatbed with Prusa stickers - decorate the bear cave instead. At each assembly milestone turn the familiar-looking control knob to receive a perfectly portioned treat. Keep your Haribo dispenser as a souvenir of the printer-building Everest you climbed. Still not convinced? Watch this professionally-produced video to see the original Haribo portion dispenser in action: "https://www.youtube.com/embed/-R2xXgtSAc0" 3D Printers > Other Accessories Thos. Haribo Portion Dispenser for Prusa i3 MK3S Kit Assembly VIEW IN BROWSER updated 15. 2. 2020 | published 15. 2. 2020
Transcript
14.53 hrs
3 pcs
f
0.20 mm0.30 mm
k
0.40 mm
h
1
186.00 g
d
MK3/S
Summary
Print this original Haribo portion dispenser to avoid the biggest issue you’llface while assembling a Prusa i3 MK3S kit - inadequate bearconsumption. This precision engineered tool is even more practical thanthe allen key with the little ball on the end. Just seat your bears on thecarousel of progress and success is guaranteed! Attach the exclusive “bearcave” cover to protect against nearby gummi predators. Resist thetemptation to plaster your heatbed with Prusa stickers - decorate the bearcave instead. At each assembly milestone turn the familiar-looking controlknob to receive a perfectly portioned treat. Keep your Haribo dispenser asa souvenir of the printer-building Everest you climbed.
Still not convinced? Watch this professionally-produced video to see theoriginal Haribo portion dispenser in action:
"https://www.youtube.com/embed/-R2xXgtSAc0"
3D Printers > Other Accessories
Thos.
Haribo PortionDispenser for Prusai3 MK3S KitAssembly
Printing your Haribo dispenser couldn’t be easier. Simply load your MK3Swith some probably not toxic orangish PLA, fire up HariboCarousel.gcodeand go hibernate. Like magic in the spring you’ll find a shiny new fully-assembled bear spinner.
You’ll need a knob. LCD-Knob.gcode works, and is strangely similar (oridentical) to the one here. Or you can print any of the fine custom MK3knobs available at PrusaPrinters.
Finally, print BearCave.gcode to shelter the Haribo while assembling yourprinter. The Goldbears like it.
If you don’t have a MK3S, or want to slice it your way, or care about littlethings like food safety, the 3MF (or STL) files are for you. PrusaSlicer“0.20mm SPEED MK3” worked for the dispenser and knob, and the“0.30mm DRAFT MK3” worked the cover - no overrides, supports or brimswere needed. Did you know that the MMU2S supports 5 filaments becauseHaribo comes in 5 flavors?
That’s it. Remember to press the time travel button on the underside ofthe carousel to deliver your Haribo dispenser to your past self just beforeyou start to assemble the printer that will in the future print the dispenserdelivered to the past.
