71
| Date post: | 28-Jan-2018 |
| Category: |
Documents |
| Upload: | harry-sachdeva |
| View: | 151 times |
| Download: | 1 times |
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
3D VIEW
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
12
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATEH & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSED 3D VIEW A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
GROUND FLOOR PLAN
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
11
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
F
E-0
1
E-0
2
E-03 E-04
E-06
E-05
21 10 11 299
4
16 11 1635
15 4135 14
11
7
38
40
18
2
5
8
8
3130
27
2718
22
23
2525
26
26
43
43
26
2626
39
39
33
34
44
44
32
13
6
3
44
84
5
12
20,21
24
25
26
26
26
2727
27
27
27
17
34
36
3721
A B C D E
1
2
3
4
EQUIPMENT LEGEND1 CUSTOMER TABLE2 CUTOMER CHAIR3 POS4 HANDS FREE WASH BASIN5 FRONT COUNTER6 BENCH TOP DRINK FRIDGE7 UPRIGHT FREEZER8 PAPER TOWEL DISPENSER9 DISHWASHING STAINLESS SINK10 VEGETABLE PREP STAINLESS SINK11 STAINLESS STEEL PREPRATION BENCH12 STAFF LOCKERS13 TOILET EXISTING14 COOKING TANDOOR15 8 BURNER GAS TOP16 HOTPLATE17 SERVICE STAINLESS BENCH18 CUSTOMER SITTING SOFA19 MALE TOILET20 FEMALE TOILET21 EXISTING COOL ROOM WITH SLIDING DOOR22 STAFF EXIT23 GREASE TRAP24 BENCH TOP REFIRIGIRATOR25 WALL PAPER FINISH26 PAINT FINISH27 CERMAIC TILE FINISH28 STAINLESS STEEL FINISH29 DISHWASHER30 KITCHEN PRINTER31 KITCHEN TELEPHONE32 DRY GOODS STORAGE33 HOT WATER UNIT34 FIRE EXTINGUISHER35 EXHAUST CANOPY ABOVE36 EXISTING ELECTRICAL BOX37 STAINLESS STEEL BENCH TOP38 WAITING SEATS39 EXIT SIGNS ABOVE 40 FLUSH PLASTERBOARD CEILING @3140 FROM FFL41 SINGLE WOK42 HAND WASH BASIN43 EXISTING WALL WITH ALLUMINIUM FRAME AND GLASS44 SELECTED FLOOR WASTE
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSED FLOOR PLANSCALE 1:100 ON A3
A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
SET OUT PLAN
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
9
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
N
3,740 6,410 4,370 5,170
5,91
04,
820
2,98
0
13,7
14
3,61
97,
766
200
2,22
915
0
10,066 9,896
158 1,635 45 1,670 45 94 2,073 50 2,035 50 2,035 176
15,778
150 3,643 200 1,460 3,126 1,494 5,606 100
6,00
85,
641
2,31
6
100
5,90
710
03,
552
247
1,74
110
02,
066
150
8095
01,
032
1,050
7,73
110
02,
198
100
3,83
4
3,726
2,097 1,955
1,21
8
3,120 100
252
6,00
810
04,
962
100
950
100
1,99
0
957
100
950
1,11
383
71,
987
728
250
785
840
840
3,532
200 3,443 200 7,301 100 2,288 110 1,886 100
E-0
1
E-0
2
E-03 E-04
E-06
E-05
EXISTING ENTRY
O'NEILLS ROAD
HIG
H S
TR
EE
T
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSED SET OUT PLANSCALE 1:100 ON A3
A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
FLOOR FINSIHES PLAN
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
10
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
N
E-0
1
E-0
2
E-03 E-04
E-06
E-05
99.34 m2
7.16 m2
45.28 m2
EXISTING FLOORING
TO REMAIN
EXISTING FLOORING
TO REMAIN
150mm HIGH COVING TO BOTHAREA. REFER TO THE DETAILATTACHED.
SELECTED FLOOR WASTE
ALL FLOORS TO BE FULLY SEALED TOPREVENT LEAKAGE INTO ADJOINING TENANCIESFLOORING IN THE KITCHEN ARE TO BE BEDDEDTO ACHIEVE FALLS TO ALL FLOOR WASTES
150mm HIGH COVING TO BOHAREA. REFER TO THE DETAILATTACHED.
SELECTED FLOOR WASTE
ALUMINIUM THRESHOLD STRIP AT CUSTOMER ENTRYTO COMPLY WITH AS1428.1 - 2009 & NZS 4121:2001
SELECTED FLOOR WASTE
FL01
FL01
MINIMUM 25mm RADIUS
PRE-FORMED BACKING PIECE
EXISTING ENTRY
FLOOR FINISHES LEGENDFL01 GREY VITAGE OAK PLANKS LAMINATEELIGNA WIDE UW1544. 1380x190x8SUPPLIER: QUICK STEP
106.5 sqm
COVING DETAIL1:50
75
MINIMUM 25mm RADIUS
PRE-FORMED BACKING PIECE
COVING DETAIL1:50
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSED FLOOR FINISHESPLAN
SCALE 1:100 ON A3A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
LIGHTING PLAN
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
15
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
N
E-0
1
E-0
2
E-03 E-04
E-06
E-05
A B C D E
1
2
3
4
EX
IT
EXIT
2 EXISTING EXIT SIGNS
17 EXISTING 36W RECESSED DOWNLIGHT
16 12W RECESSED DOWNLIGHT
6 25WATT X 6 BLACK 6 LIGHT CLUSTER PENDANT
3 700X300 25 WATT X 3 BLACK METAL ADJUSTABLE 3 LIGHT PENDANT
2 LED 4 LIGHT SPOT BAR CHROME GLASS WARM WHITE 4 X 7.5 WATT
11 EXISTING 1200x300 RECESSED PLASTERBOARD TROFFER 11 x 28W TRIPHOSPHER LIGHTS
ACCESS PANEL
EMERGENCY LIGHTING
TOTAL AREA RESTURANT: 107M Sq ILLUMINIATION POWER DENSITY (W/m2): 9.8
TOTAL AREA KITCHEN / PREPRATION: 63.4 M SqILLUMINATION POWER DENSITY (W/M2): 5.4
ALL LIGHTING TO COMPLY WITH AS1680, AS4674. NCC CLAUSE J6.2B & INSTALLED TOAS3000.
612W
192W
150W
75W
60W
308W
18 WATTS PER SQM. MAX. TO COMPLY NCC CLAUSE J6.2B
LIGHTINGLEGEND NO. DESCRIPTION
TOTALWATTS
EXIT
AP
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
DANA PANIINDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSEDLIGHTING PLANSCALE 1:100 ON A3
A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
INTERNAL ELEVATIONS
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
13
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
WALL ART
PENDANT LIGHTS
SERVICE WINDOWPAINT FINISHPAINT FINISH
EXISTING CURTAIN WALL EXISTING CURTAIN WALL PAINT FINISH PAINT FINISH
LOGO SIGNAGE
WALL PAPER FINISH
POSWAITING AREA
PENDANT LIGHTS ABOVE THE RECEPTION DESK
EXISTING WALLPAINT FINISH
EXISTING WALLPAINT FINISH
POS LOGO SIGNAGE
WALL PAPER FINISH PAINT FINISH
ELEVATION E-01
ELEVATION E-02
ELEVATION E-03
H & S DRAFT AND DESIGN
0451941088
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSEDELEVATIONSSCALE 1:50 ON A3
A103
DRAWING NO. REVISON NO.ISSUE DATE
2
GSEducationalVersionPlot Date:
DRAWN BY :
DANA PANI #Site Full Address
#Client Company
INTERNAL ELEVATIONS2
PROJECT NAME :
DRAWING TITLE :
CLIENT :
SITE :
CHECKED BY :
PROJECT NO.
#Pln
#Client Full Address
#Client City, , #Client Postcode
P +#Client Phone Number | F +#Client Fax | E #Client E-mail
DRAWING NO.
14
REVISION NO.
Place your LOGO herePlace your own LOGO with the Figure Tool or link it
with the Drawing Tool 5/26/2016
#Contact CompanyABN #ABN
Address: #Contact Full AddressP +#Contact Phone Number | F +#Contact Fax | E #Contact E-mail |W #Contact Web
General NotesThe Builder shall check all dimensions and levels on site prior to construction.Notify any errors, discrepancies or omissions to the architect.Drawings shall not be used for construction purposes until issued for construction.Do not scale drawings.All boundaries and contours subject to survey
H & S DRAFT AND DESIGN
0451941088
DISCLAIMER: ALL DIMENSIONS MUST BE CHECKEDON SITE BEFORE COMMENCEMENTOF CONSTRUCTION OR MANUFACTURING OFANY ITEM OR EQUIPMENT. DO NOTSCALE DRAWING. USE DIMENSIONS INDICATED.
AMENDMENTS
A3
CLIENT DATE
AREA
DRAWING NO. REVISON NO.ISSUE DATE
DRY STORAGE
PAPER TOWEL DISPENSER EXISTING CERAMIC TILE FINISH
EXISTING CERAMIC TILE FINISH
EXHAUST CANOPY
FIRE EXTINGUISHER
BENCH TOP FRIDGE
UPRIGHT FREEZER
TANDOOR
EXISTING WALL WITH CERAMIC TILE FINISH
EXISTING HOT PLATE
EXISTING HAND WASH BASIN
UPRIGHT FREEZER
SERVICE WINDOW
KITCHEN PRINTERTELEPHONE
SERVICE BENCH
DRY GOODS STORAGE
PAINT FINISH EXISING CERAMIC TILE FINISHPAINT FINISH
EXISTING COOL ROOM EXISTING WALL WITH CERMAIC TILE FINISHPAPER TOWEL DISPENSER DISABLED TOILET
DRY STOCK STORAGE STAFF LOCKERS
POT RACK
DISH WASHING SINK
DISHWASHERPREP BENCHFOOD WASH SINK
ELEVATION E-06
H & S DRAFT AND DESIGN
0451941088
AMENDMENTS
A3INDIAN RESTURANT
0433715300
CLIENT DATE
AREA
22/5/2016
173 sqm
PROPOSEDELEVATIONSSCALE 1:50 ON A3
A103
DRAWING NO. REVISON NO.ISSUE DATE
2
ELEVATION E-04 ELEVATION E-05
