Market Leaders in Specialised Automotive Products & Telematics
IntroductionSince RSG Engineering Limited was originally founded in the early1960’s we have been committed to, and have taken pride in, providing an exceptional level of service to all our customers.Specialising in the professional automotive market we workclosely with our customers to develop a unique product portfoliosuited to their specialised needs.
Collaborating with the best brand names in the business enablesRSG to deliver top quality products at competitive prices. Thebreadth of our range means that customers can procure many oftheir everyday requirements from a single source. We also providea comprehensive range of specialised products to ensure allround best value and service.
Demonstrating our commitment to producing quality productsand dealing with customers in a professional manner we havebeen awarded ISO 9001:2008. It is estimated that less than 5%of UK business have been successful in gaining this accolade.
This, our Lighting Options catalogue, is dedicated to auxiliaryvehicle lighting. We also have Standard Lightbar, Beacons & MiniLightbar, System Control, Audio & Visual and Telematics brochureswhich offer an extensive range of hazard warning equipment forthe emergency services and recovery services markets.
Vehicle Mounted Warning Equipment for the Emergency Services - Framework Agreement HO CPP/03RSG Engineering is one of only 3 companies to be officially appointed to the Home Office Lightbar Framework Agreement.We are particularly delighted with this appointment as this reinforces that our offerings are economically advantageousbased on their very stringent selection criteria.
Furthermore we are an active member of the Home Office OBSVA& DVDMS Consortium and fully support the CiA447 Protocol.
Equipment Installation Training
Installation training related to RSG products and systems can be carried out in our workshop or at your premises dependent upon the product’s specification. All of our engineers are fully trained and qualified with expertise in their own specialist field.
Experience
All of our product and system engineers have expert knowledge of the complexities of modern vehicle design as well as their electronic and electrical control systems such as CAN Bus.
Craftsmanship
In addition to their engineering abilities our vehicle installation trainingteam take great pride in their workmanship. They endeavour to demonstratethat all new wiring is installed as an integral part of the vehicle’s originalwiring loom, and, that all panelling is replaced correctly and in it’s originalcondition. In fact, there will be little or no effect on body work, trim, panels or CAN bus data.
Full Service
Whether you have a single vehicle or a small fleet, RSG has a range of products to offer a full fit out from start to finish including hazard warningequipment, data recording devices and full livery. Noting that in conjunctionwith this, RSG can provide an expert installation advisory service as wellas producing initial sample vehicles.
Manufacture
Having our own manufacturing facility in the same building enables us toprovide that extra level of service. Being able to modify and manufactureequipment on site is of great benefit especially when dealing with specialrequirements.
We manufacture and assemble a range of products including lightbars andswitch panels to customer specification. The development of new productsand bespoke projects is carried out by our experienced in-house product design team who utilise the latest CAD software.
Specialised Data & Video Recording Training
We have created a range of training programs in order that customers canmake the most of the data provided from journey recorders and videosurveillance systems.
These training courses can be scheduled to take place at RSG’s premisesor at premises of your choosing.
Section 2 : External LED Lighting
2:5 Mini Stealth Surface Mount LED Modules
2:6 Mini Stealth Flush Fit LED Modules
2:7 Diablo II LED Modules
2:8 Xtreme LED Modules
2:9 ED5000 LED Warning Lamps
24 LED Slimline Lamps
2:10 ID LED Modules
OE9 LED Modules
2:11 Zephyr LED Modules
Xtreme Slim LED Modules
2:12 BX Bullitt LED Modules
2:13 MicroLite 4 LED Modules
Micro Burst LED Modules
Micro Blast LED Modules
2:14 SQ4 LED Lamps
Securi LED Lamps
2:15 Mega-Flash Circular Cluster LED Modules
Stealth RegPlate Number Plate Warning System
Section 3 : Internal LED Lighting
3:17 Titan Dash Light
MicroMax Xtreme II Dash Light
3:18 MicroMax Diablo II Dash Light
MirrorMaster Windscreen Warning Light
3:19 Temporary Rear Window Warning Light
3:20 LED Message Display Units
3:21 Message Master LED Warning Sign
Contents
Section 4 : New Product Profiles
4:22 Duo 1 LED Light Heads
Colour CCTV Reversing Kit
Flexible LED Light Strip
Section 1 : Covert LED Lighting
1:1 Bullet Covert LED Modules
HAL9014 Covert LED Modules
Pop-a-light Covert LED Modules
1:2 Directional Fend-Off Covert LED Modules
T.R.I. 360º Covert LED Modules
DW600 Covert LED Modules
1:3 W600 Covert LED Modules
X1100 Covert LED Modules
N500 Covert LED Modules
Pop-a-light LED-667-01
Section 1 :
Covert Vehicle Hazard Warning LED Lightingfor both the blue and amber markets
Covert LED modules are generally installed in the vehicle’s headlightand tail light housing making them virtually un-noticeable when notin use, however, when on, high intensity, next generation LEDs resultin exceptional light output when in use, even in bright sunlight.
We believe that we have put together an excellent, diverse range of covertLED modules to suit the majority of applications. A selection of the modulesare also available with a plastic bezel to facilitate surface mounting themodule onto the vehicle bodywork and wing mirrors.
A sealed, in-line driver unit, complete with sufficient cable, eliminates theneed for a remote power supply, considerably reducing the amount of damage incurred to the vehicle during installation.
The range includes single head and dual head versions that can operate at12v, 24v or both (see individual product for details). Multiple modules can be configured to flash alternately or simultaneously, where the W600split colour version is unique in that it can be independently switched between colours.
W600 Hide-A-LED LED-476-01
N500 Hide-A-LED LED-433-01
Bullet Hide-A-LED LED-958-03
Covert Vehicle Hazard Warning LED LightingSection 1 :Covert LED
Pop-a-light Covert LED ModulesA pair of pop-in LED light heads for mounting in a pre-drilled one inch hole withinthe vehicles front or rear light cluster or surface mount using optional bezel.
• Sold as a double head kit complete with power unit and cable • 6 super-bright LEDs on the top face of the module• 19 built-in flash patterns plus 2 modes for split or simultaneous flashing• Electro-deposition coating to the underside improving corrosion resistance• Available in blue, red, amber and white as well as independently switchable blue/red, amber/red and blue/white with clear lenses• Optional black or chrome effect surface mounting bezels available to order• Each head 28(W) x 30(H)mm• 5 year warranty
Optional surface mounting bezel available to order.
LIGHT DIRECTION
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-667-01 Pop-a-light Covert Led Module Kit Blue Clear 1.2 max 12v LED-669-01 Pop-a-light Covert Led Module Kit Red Clear 1.2 max 12v LED-670-01 Pop-a-light Covert Led Module Kit Amber Clear 1.2 max 12v LED-668-01 Pop-a-light Covert Led Module Kit White Clear 1.2 max 12v LED-903-01 Pop-a-light Covert Led Module Kit Blue/Red Clear 1.2 max 12v LED-915-01 Pop-a-light Covert Led Module Kit Blue/White Clear 1.2 max 12v LED-937-01 Pop-a-light Covert Led Module Kit Amber/Red Clear 1.2 max 12v ACC-205 Optional Covert Surface Mount Bezel Set - Black - - - - ACC-206 Optional Covert Surface Mount Bezel Set - Chrome - - - -
HAL9014 Covert LED ModuleA single LED light head for mounting in pre-drilled one inch hole within the vehicles front or rear light cluster.
• Sold as a single head unit complete with power unit and cable and black mounting bezel• 6 super-bright LEDs, on the top face of the module• 16 built-in flash patterns including single, double, triple, quad and deci• Available as single colour only• Available in blue, red, amber and white• Lumens: blue 100, red 200, amber 200 and white 460• Each head 38(W) x 22(H)mm• e approved and ingress protected to IP67• 3 year warranty
LIGHT DIRECTION
Bullet Slimline Covert LED ModulesA single slimline LED light head for mounting in pre-drilled half inch hole withinthe vehicles front or rear light cluster.
• Sold as a short or tall single head unit complete with power unit and cable • 2 super-bright LEDs per unit, on the top face of the module• 16 built-in flash patterns including single, double, triple, quad and deci• Available as single colour only• Available in blue, red, amber and white• Lumens: blue 100, red 200, amber 200 and white 460• Short module 25(W) x 33(H)mm. Tall Module 25(W) x 60(H)mm• e approved• 3 year warranty
LIGHT DIRECTION
Virtually half the diameter of existing models
EMC !
EMC !
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-797-03 HAL9014 Covert Led Module Kit Blue Clear 0.6-1.25 12/24v LED-799-03 HAL9014 Covert Led Module Kit Red Clear 0.6-1.25 12/24v LED-796-03 HAL9014 Covert Led Module Kit Amber Clear 0.6-1.25 12/24v LED-798-03 HAL9014 Covert Led Module Kit White Clear 0.6-1.25 12/24v
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-803-03 Short Bullet Slimline Covert Led Module Kit Blue - 0.7 12/24v LED-957-03 Short Bullet Slimline Covert Led Module Kit Red - 0.7 12/24v LED-804-03 Short Bullet Slimline Covert Led Module Kit Amber - 0.7 12/24v LED-958-03 Short Bullet Slimline Covert Led Module Kit White - 0.7 12/24v LED-805-03 Tall Bullet Slimline Covert Led Module Kit Blue - 0.7 12/24v LED-980-03 Tall Bullet Slimline Covert Led Module Kit Red - 0.7 12/24v LED-806-03 Tall Bullet Slimline Covert Led Module Kit Amber - 0.7 12/24v LED-981-03 Tall Bullet Slimline Covert Led Module Kit White - 0.7 12/24v
Directional Fend-Off Covert LED ModulesA pair of LED light heads for mounting in pre-drilled one inch holes withinthe vehicles front or rear light cluster or surface mount using the optionalblack mounting bezel supplied.
• Sold as a double head kit complete with power unit, cable and black mounting bezel (chrome effect bezels available to order)• 6 super-bright LEDs on one side of each module• Electro-deposition coating to the underside improving corrosion resistance• 19 built-in flash patterns plus 2 modes for split or simultaneous flashing• Available as single or dual colour• Available in blue, red, amber, white, as well as independently switchable blue/red, amber/red and blue/white with clear lenses• Each head 38(W) x 26(H)mm (not including optional bezel)• e approved• 5 year warranty PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-614-01 Directional Fend-off Covert Led Module Kit Blue Clear 1.2 max 12v LED-613-01 Directional Fend-off Covert Led Module Kit Red Clear 1.2 max 12v LED-612-01 Directional Fend-off Covert Led Module Kit Amber Clear 1.2 max 12v LED-582-01 Directional Fend-off Covert Led Module Kit White Clear 1.2 max 12v LED-902-01 Directional Fend-off Covert Led Module Kit Blue/Red Clear 1.2 max 12v LED-914-01 Directional Fend-off Covert Led Module Kit Blue/White Clear 1.2 max 12v LED-936-01 Directional Fend-off Covert Led Module Kit Amber/Red Clear 1.2 max 12v ACC-205 Additional Surface Mount Bezel Set - Black - - - - ACC-206 Additional Surface Mount Bezel Set - Chrome - - - -
T.R.I. 360º Covert LED Modules (Triangular Reflective Illumination)
A pair of LED light heads for mounting in pre-drilled one inch holes within the vehicles front or rear light cluster.
• Sold as a double head kit complete with power unit and cable • Uniquely constructed with 9 LEDs mounted on 3 sides creating a triangular formation for maximum 360º light output• 19 built-in flash patterns• Available as single colour only• Available in blue, red, amber and white with clear lenses• Each head 38(W) x 30(H)mm• e approved• 5 year warranty
LIGHT DIRECTION
DW600 Hide-A-LED Covert LED ModulesA pair of W600 LED light heads for mounting in pre-drilled one inch holes within the vehicles front or rear light cluster.
• Sold as a double head kit complete with power unit and cable • 4 super-bright LEDs, two on each side of each module• 16 built-in flash patterns, 8 standard and 8 optional cycle• Available as single colour only• Available in blue, red, amber and white with clear lenses• Lumens: blue 155, red 123, amber 160 and white 660• Each head 38(W) x 30(H)mm• e approved• 5 year warranty
LIGHT DIRECTION
EMC !
EMC !
EMC !
Supplied with blackoptional surfacemounting bezel.
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-601-01 DW600 Hide-A-LED Red Clear 0.4-1.0 12v LED-602-03 DW600 Hide-A-LED Blue Clear 0.4-1.0 12/24v LED-603-03 DW600 Hide-A-LED White Clear 0.4-1.0 12/24v LED-604-01 DW600 Hide-A-LED Amber Clear 0.4-1.0 12v
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-541-03 T.R.I. 360º Covert Led Module Kit Blue Clear 1.8 max 12/24v LED-542-03 T.R.I. 360º Covert Led Module Kit Red Clear 1.8 max 12/24v LED-543-03 T.R.I. 360º Covert Led Module Kit White Clear 1.8 max 12/24v LED-544-03 T.R.I. 360º Covert Led Module Kit Amber Clear 1.8 max 12/24v
Covert Vehicle Hazard Warning LED LightingSection 1 :Covert LED
N500 Hide-A-LED Covert LED ModuleA single LED light head for mounting in pre-drilled one inch hole within the vehicles front or rear light cluster.
• Sold as a single head unit complete with power unit and cable • 4 super-bright LEDs, on one side of the module• 16 built-in flash patterns, 8 standard and 8 optional cycle• Available as single colour only• Available in blue, red, amber and white with clear lenses• Lumens: blue 92, red 123, amber 160 and white 500• Each head 38(W) x 41(H)mm• e approved• 5 year warranty
LIGHT DIRECTION
W600 Hide-A-LED Covert LED ModuleA single LED light head for mounting in pre-drilled one inch hole within the vehicles front or rear light cluster.
• Sold as a single head unit complete with power unit and cable • 4 super-bright LEDs, two on each side• 16 built-in flash patterns, 8 standard and 8 optional cycle• Available as single and independently switchable split colour• Available in blue, red, amber and white as well as split blue/red and blue/white with clear lenses• Lumens: blue 155, red 123, amber 160 and white 660• Each head 38(W) x 30(H)mm• e approved• 5 year warranty
LIGHT DIRECTION
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-476-01 W600 Hide-A-LED Covert LED Module Red Clear 0.35 max 12v LED-474-03 W600 Hide-A-LED Covert LED Module Blue Clear 0.5 max 12/24v LED-475-03 W600 Hide-A-LED Covert LED Module White Clear 0.5 max 12/24v LED-473-01 W600 Hide-A-LED Covert LED Module Amber Clear 0.35 max 12v LED-477-01 W600 Hide-A-LED Covert LED Module (Switchable) Blue/Red Clear 0.35 max 12v LED-478-01 W600 Hide-A-LED Covert LED Module (Switchable) Blue/White Clear 0.5 max 12/24v
X1100 Hide-A-LED Covert LED ModuleA single LED light head for mounting in pre-drilled one inch hole within the vehicles front or rear light cluster.
• Sold as a single head unit complete with integral heatsink, power unit and cable • 6 super-bright LEDs, two on the top and two on each side• 16 built-in flash patterns, 8 standard and 8 optional cycle• Available as single or split colour• Available in blue, red, amber and white as well as split blue/red/blue, white/blue/white and red/amber/red with clear lenses• Lumens: blue 240, red 358, amber 358 and white 1100• Each head 38(W) x 30(H)mm• e approved• 5 year warranty
LIGHT DIRECTION
EMC !
EMC !
EMC !
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-482-01 X1100 Hide-A-LED Covert LED Module Red Clear 0.5 max 12v LED-480-03 X1100 Hide-A-LED Covert LED Module Blue Clear 0.5 max 12/24v LED-481-03 X1100 Hide-A-LED Covert LED Module White Clear 0.5 max 12/24v LED-483-01 X1100 Hide-A-LED Covert LED Module Amber Clear 0.5 max 12v
PART NO. DESCRIPTION LED LENS AMPS VOLTAGE
LED-431-01 N500 Hide-A-LED Red Clear 0.35 max 12v LED-430-01 N500 Hide-A-LED Blue Clear 0.5 max 12/24v LED-433-01 N500 Hide-A-LED White Clear 0.5 max 12/24v LED-432-01 N500 Hide-A-LED Amber Clear 0.35 max 12v
External LED modules are generally installed in the grille or at salientpoints on the exterior bodywork of the vehicle. However, they areincreasingly being introduced into the interior, particularly into the tail gate. This is due, in part, to recent guidelines stating that ‘All RPG (Roads Policing Group) vehicles and any other vehicle involved in attending incidents on high speed roads should havehigh level blue/red LED lights fitted in the tailgate in the highest position’. It was found that low level lighting and roof lighting wereobscured when the tailgate was raised. This also applies to roadside workers using amber lights. Approval to ECE R65 also appliesin some circumstances.
We provide a diversity of LED modules consisting of a variety of styles andsizes, those with clear lenses for inconspicuous installation and those withcoloured lenses for maximum impact.
All modules are manufactured to the strictest industry standards to meetcustomer demands for quality and reliability. With energy efficient, nextgeneration LEDs throughout the range they provide amazing light outputfor very little draw.
Mini Stealth LED-634-03
Mini Stealth LED-631-03
9-way Extreme LED-397-01
Stealth RegPlate REG-004
Section 2 :
External Vehicle Hazard Warning LED Lightingfor both the blue and amber markets
3-way, 6-way & 12-way Surface Mount LED ModulesMini Stealth Surface Mount LED modules are extremely powerful andcompact units. They are available with 3, 6 or 12, high intensity LEDs setwithin a low profile housing.
Surface Mount Mini Stealth’s have a sealed, weather resistant aluminium housingthat can be fixed directly to the ‘surface’ or ‘inset’ with the use of a rubber boot. Arange of mounting brackets for alternative applications are available.
All versions operate at 12v and 24v, are supplied complete with fixings and mountinggaskets and multiple modules can be configured to flash simultaneously or alternately.They are also e-approved and have a 5 year warranty. R65 versions are also available.
3-way Surface Mount Mini Stealth• Up to 12 built-in flash patterns• Available in blue, red, amber and white
6-way Surface Mount Mini Stealth• Up to 23 built-in flash patterns• Available in blue, red, amber and white, as well as blue/white and blue/red that are switched together but not independently• Blue and amber R65 certified versions are available to order• Vertical blue and amber R65 certified versions are available to order
12-way Surface Mount Mini Stealth• Up to 25 built-in flash patterns with 3 additional flashing options for effective hazard warning• Available in R65 approved blue and amber as well as non R65 white, red, blue/white and blue/red. Amber/white, red/white and blue/amber versions are also available to order. Dual colour versions are switched together but not independently
Dimensions
3-way Surface Mount Mini Stealth
6-way Surface Mount Mini StealthHorizontal and Vertical
12-way Surface Mount Mini Stealth
External Vehicle Hazard Warning LED LightingSection 2 :External LED
3-way Surface Mount Mini Stealth3-way LED Modules PART NO. COLOUR AMPS VOLTAGE LED-676-03 Blue 0.4/0.22 12/24v LED-675-03 Red 0.4/0.22 12/24v LED-678-03 Amber 0.4/0.22 12/24v LED-677-03 White 0.4/0.22 12/24v
3-way Rubber Mounting Boot PART NO. DESCRIPTION
ACC-253 3-way Rubber Mounting Boot
3-way Mounting Brackets PART NO. DESCRIPTION ACC-262 Single Head ‘L’ Bracket ACC-263 Dual Head Stacked ‘L’ Bracket ACC-264 Dual Head Side by Side ‘L’ Bracket ACC-265 License Plate Bracket ACC-267 Headliner Bracket ACC-268 Swivel Mount Bracket ACC-266 Trunk Bracket
6-way Surface Mount Mini Stealth6-way LED Modules PART NO. COLOUR AMPS VOLTAGE LED-631-03 Blue 0.8/0.44 12/24v LED-689-03 Blue (R65) 0.8/0.44 12/24v LED-1023-03 Blue Vertical (R65) 0.8/0.44 12/24v LED-630-03 Red 0.8/0.44 12/24v LED-629-03 Amber 0.8/0.44 12/24v LED-690-03 Amber (R65) 0.8/0.44 12/24v LED-1024-03 Amber Vertical (R65) 0.8/0.44 12/24v LED-632-03 White 0.8/0.44 12/24v LED-633-03 Blue/White 0.8/0.44 12/24v LED-634-03 Blue/Red 0.8/0.44 12/24v
6-way Mounting Brackets PART NO. DESCRIPTION 13-1300 Single Head ‘L’ Bracket 13-1301 Dual Head Stacked ‘L’ Bracket 13-1302 Dual Head Side by Side ‘L’ Bracket 13-1303 License Plate Bracket ACC-290 Headliner Bracket 13-1305 Swivel Mount Bracket 13-1306 Trunk Bracket
12-way Surface Mount Mini Stealth12-way LED Modules PART NO. COLOUR AMPS VOLTAGE LED-818-03 Blue (R65) 1.6/0.88 12/24v LED-819-03 Red 1.6/0.88 12/24v LED-817-03 Amber (R65) 1.6/0.88 12/24v LED-820-03 White 1.6/0.88 12/24v LED-824-03 Blue/White 1.6/0.88 12/24v LED-823-03 Blue/Red 1.6/0.88 12/24v
12-way Mounting Brackets PART NO. DESCRIPTION ACC-311 Single Head ‘L’ Bracket ACC-312 Dual Head Stacked ‘L’ Bracket ACC-313 Dual Head Side by Side ‘L’ Bracket
Rubber boot for insetting themodule into the bodywork
3-way and 6-way Flush Fit LED ModulesMini Stealth Flush Fit LED modules are extremely powerful and compactunits. They are available with 3 or 6 in-line, high intensity LEDs set within an adjustable light head.
Flush Fit Mini Stealth’s have a sealed, robust, weather resistant aluminium housingand are supplied complete with a wrap around bracket that slides over the surfaceedge and is secured in position from below. The unit can also be used without thewrap around bracket to fit directly to the surface or suspend from a roof lining.
• Supplied complete with bracket, fixings and mounting gaskets• Multiple modules can be configured to flash simultaneously or alternately• A minimum of 5 built-in flash patterns• Available in blue, red, amber and white, 6-way versions are available in blue/white and blue/red but switched together• R65 certified versions of the blue and amber 6-way units available to order• Vertical blue and amber R65 certified versions are also available to order• 12/24 volt operation• e-approved• 5 year warranty
Dimensions
Mounting Options
3-way Flush Fit Mini StealthLED Modules PART NO. COLOUR AMPS VOLTAGE LED-672-03 Blue 0.4/0.22 12/24v LED-671-03 Red 0.4/0.22 12/24v LED-674-03 Amber 0.4/0.22 12/24v LED-673-03 White 0.4/0.22 12/24v
6-way Flush Fit Mini StealthLED Modules PART NO. COLOUR AMPS VOLTAGE LED-625-03 Blue 0.8/0.44 12/24v LED-687-03 Blue (R65) 0.8/0.44 12/24v LED-1021-03 Blue Vertical (R65) 0.8/0.44 12/24v LED-624-03 Red 0.8/0.44 12/24v LED-623-03 Amber 0.8/0.44 12/24v LED-688-03 Amber (R65) 0.8/0.44 12/24v LED-1022-03 Amber Vertical (R65) 0.8/0.44 12/24v LED-626-03 White 0.8/0.44 12/24v LED-627-03 Blue/White 0.8/0.44 12/24v LED-628-03 Blue/Red 0.8/0.44 12/24v
Flush Mount Using Wrap Around Bracket
Surface Mount Without Wrap Around Bracket
Suspended Mount Without Wrap Around Bracket
3-way Flush Mini Stealth
6-way Flush Fit Mini StealthHorizontal and Vertical
EMC !SAE !
ECE R65OPTIONS !
External Vehicle Hazard Warning LED LightingSection 2 :External LED
The NEW 3-way and 4-way Diablo II LED modules are now dual voltage with an aluminium base that is glued and snap fit to the low profile polycarbonate lens.
The wide viewing angle of the next generation, super bright LEDs means that theyare particularly suitable for mounting on the wing or grille of a vehicle as well asmany other warning and safety applications.
• Supplied with black plastic bezel, rubber flange and fixings for surface mounting the modules• Additional rubber boots for insetting the module into the body work and ‘L’ shaped brackets are available to order• Multiple modules can be configured to flash simultaneously or alternately• The 3-way version has 12 and the 4-way version has 19 built-in flash patterns• Available in blue, red, amber and white, the 4-way version is also available in blue/red but switched together• R65 certified versions of the 3-way in amber and the 4-way in blue and amber are available to order• 12/24 volt operation• e-approved• 5 year warranty
3-way Diablo II
4-way Diablo II
3-way Diablo II3-way Diablo LED Modules PART NO. COLOUR AMPS VOLTAGE LED-573-03 Blue 0.35 12/24v LED-574-03 Red 0.35 12/24v LED-575-03 Amber 0.35 12/24v LED-938-03 Amber (R65) 0.35 12/24v LED-576-03 White 0.35 12/24v
The Xtreme range of ultra-bright LED modules utilise ‘laser-cut’ optic technology to create extra wide angle viewing.
The light output from these modules is exceptional ensuring suitability for a widerange of warning and safety applications.
Xtreme modules are available in 4-way and 6-way compact versions as well as thestandard 9-way and 18-way.
• Supplied with bezel, rubber flange and fixings for surface mounting the modules• Additional ‘L’ shaped brackets are available to order• Multiple modules can be configured to flash simultaneously or alternately• 19 built-in flash patterns• Available in blue, red, amber and white, with dual colour versions also available, see specification tables for details• 12 volt and 12/24 volt operation as specified• e-approved• 5 year warranty
4-way Compact Xtreme
6-way Compact Xtreme
9-way Xtreme
18-way Xtreme
EMC !SAE !
18-way Xtreme LED Module PART NO. COLOUR AMPS VOLTAGE LED-449-03 Blue 2.43 12/24v LED-447-03 Red 2.43 12/24v LED-448-03 Amber 2.43 12/24v LED-450-03 White 2.43 12/24v LED-451-01 9xBlue/9xRed 2.43 12v LED-452-01 9xBlue/9xWhite 2.43 12v LED-453-01 9xAmber/9xRed 2.43 12v
9-way Xtreme LED ModuleStandard 9-way Xtreme PART NO. COLOUR BEZEL AMPS VOLTAGE LED-392-03 Blue Black 1.05 12/24v LED-390-01 Red Black 1.05 12v LED-391-03 Amber Black 1.05 12/24v LED-393-03 White Black 1.05 12/24v LED-394-01 Blue/Red Black 1.05 12v LED-514-01 Blue/White/Blue Black 1.05 12v LED-515-01 White/Blue/White Black 1.05 12v
Switched Dual Colour 9-way Xtreme PART NO. COLOUR BEZEL AMPS VOLTAGE LED-454-01 Blue/Red Black 1.05 12v LED-455-01 Amber/Red Black 1.05 12v
Programmable Dual Colour 9-way Xtreme PART NO. COLOUR BEZEL AMPS VOLTAGE LED-429-01 Blue/Red Black 1.05 12v LED-428-01 Amber/Red Black 1.05 12v
4-way Compact Xtreme PART NO. COLOUR AMPS VOLTAGE LED-530-03 Blue 0.52 12/24v LED-529-03 Red 0.52 12/24v LED-532-03 Amber 0.52 12/24v LED-531-03 White 0.52 12/24v
6-way Compact Xtreme PART NO. COLOUR AMPS VOLTAGE LED-534-03 Blue 0.92 12/24v LED-533-03 Red 0.92 12/24v LED-536-03 Amber 0.92 12/24v LED-535-03 White 0.92 12/24v LED-537-03 Blue/Red 0.92 12/24v LED-538-03 Amber/Red 0.92 12/24v
External Vehicle Hazard Warning LED LightingSection 2 :External LED
The ED5000 range of single colour directional LEDwarning lamps offer the flexibility of multiple mounting options within a single unit.
Comprising 6 high intensity LEDs behind a clear polycarbonatelens and encapsulated electronics for added security.
• 6 high intensity LEDs• 3 built-in flash patterns• Adjustable, multi-position mounting bracket• Aluminium housing, clear polycarbonate lens• Encapsulated electronics• Ingress protected to IP67• 3 year warranty• 12/24v operation• ECE R65 (Blue and Amber only) and e-approved
ED5000 LED Modules PART NO. COLOUR AMPS VOLTAGE LED-944-03 Blue (R65) 1.5 12/24v LED-946-03 Red 1.5 12/24v LED-947-03 Amber (R65) 1.5 12/24v LED-945-03 White 1.5 12/24v
24 LED Slimline Lamp
Dimensions
The 24 LED Slimline Lamp contains 24 wide angle, high intensity LEDs making it ‘super bright’. Completelywaterproof and self-contained the lamp is pre-wiredwith a 2.75 metre cable and in-line driver.
• Supplied with bezel and fixings for surface mounting the module• Multiple modules can be synchronised with additional lamps as well as Hide-A-LEDs• 16 built-in flash patterns, 8 standard and 8 cyclic• Available in blue, red, amber and white• Lumens: blue 120, red 360, amber 336 and white 528• 12/24 volt operation• 5 year warranty• e-approved
24 LED Slimline Lamp PART NO. COLOUR AMPS VOLTAGE LED-521-03 Blue 0.75 12/24v LED-520-03 Red 0.75 12/24v LED-519-03 Amber 0.75 12/24v LED-522-03 White 0.75 12/24v
Mounting Options PART NO. DESCRIPTION 13-1241 Additional Surface Mounting Bezel 13-1240 ‘L’ Bracket 13-1242 Flush Fit Bracket
The ID range of identification LED modules are available as dual colour unitsthat are switched together but not independently. They are also available assingle colour units with the additional feature of extra steady burn, ideal for use as a vehicle marker.
These LED modules feature a clear polycarbonate lens that wraps around the endof the unit where the LED is side facing creating wider visibility.
• Supplied complete with fixings and mounting gaskets• Multiple modules can be configured to flash simultaneously or alternately• 15 built-in flash patterns• Available in blue, red, amber and white single colour modules and blue/white, blue/red, amber/red and amber/white dual colour versions• Dual colour modules are switched together but not independently• 12/24 volt operation• ECE Regulation 65 (Blue and Amber), US SAE accredited and e-approved• 5 year warranty
ID26 LED Module PART NO. COLOUR AMPS VOLTAGE LED-1013-03 Blue (R65) 1.75 max 12/24v LED-1016-03 Red 1.75 max 12/24v LED-1014-03 Amber (R65) 1.75 max 12/24v LED-1015-03 White 1.75 max 12/24v LED-1019-03 Blue/Red 1.75 max 12/24v LED-1017-03 Blue/White 1.75 max 12/24v LED-1020-03 Amber/Red 1.75 max 12/24v LED-1018-03 Amber/White 1.75 max 12/24v
ID6 LED Module PART NO. COLOUR AMPS VOLTAGE LED-1044-03 Blue (R65) 1.0 max 12/24v LED-1045-03 Red 1.0 max 12/24v LED-1046-03 Amber (R65) 1.0 max 12/24v LED-1047-03 White 1.0 max 12/24v LED-1048-03 Blue/Red 1.0 max 12/24v LED-1049-03 Blue/White 1.0 max 12/24v LED-1050-03 Amber/Red 1.0 max 12/24v LED-1051-03 Amber/White 1.0 max 12/24v
ID26
ID6
NEW
OE9 LED Modules
Dimensions
OE9 LED Modules PART NO. COLOUR AMPS VOLTAGE LED-1052-03 Blue (R65) 0.58 12/24v LED-1053-03 Red 0.58 12/24v LED-1054-03 Amber (R65) 0.58 12/24v LED-1055-03 White) 0.58 12/24v
NEW
ECE R65OPTIONS !EMC !SAE !
The new OE9 range of single modules have a true 180º wide viewingangle due to the unique placement of the LEDs and the clear polycarbonate lens that wraps around the side of the unit.Nine high powered LEDs are suspended from the top of the module withhighly polished integral reflectors for maximum the light output.
• Supplied complete with fixings and mounting gaskets• Multiple modules can be configured to flash simultaneously or alternately• 16 built-in flash patterns• Available in blue, red, amber and white• 12/24 volt operation• ECE Regulation 65 accredited (Blue and Amber only)• e-approved• 5 year warranty
EMC !ECE R65OPTIONS !
External Vehicle Hazard Warning LED LightingSection 2 :External LED
The Zephyr range of LED modules is extremely low profile containing 3, 6 or8 high power 1w LEDs. Weatherproof and vibration resistant it is suitable forinternal or external use, the lamp features 23 selectable flash patterns and isavailable single or dual colour.
These LED modules feature a clear polycarbonate and self-adhesive backing for quickand simple installation.
• Supplied complete with fixings and self-adhesive backing• Multiple modules can be configured to flash simultaneously or alternately• 23 built-in flash patterns• Available in blue, red, amber and white single colour modules and blue/white, blue/red and amber/red dual colour versions• 12/24 volt operation• US SAE accredited and e-approved• 12 month warranty
Zephyr 3 LED Module
PART NO. COLOUR AMPS VOLTAGE
LED-1056-03 Blue 0.13 max 12/24v LED-1057-03 Red 0.13 max 12/24v LED-1058-03 Amber 0.13 max 12/24v LED-1059-03 White 0.13 max 12/24v
Zephyr 6 LED Module
PART NO. COLOUR AMPS VOLTAGE
LED-1026-03 Blue 0.25 max 12/24v LED-1027-03 Red 0.25 max 12/24v LED-1028-03 Amber 0.25 max 12/24v LED-1029-03 White 0.25 max 12/24v LED-1031-03 Blue/Red 0.25 max 12/24v LED-1032-03 Blue/White 0.25 max 12/24v LED-1030-03 Amber/Red 0.25 max 12/24v
EMC !SAE !
Zephyr 3
Zephyr 6
NEW
Xtreme Slim LED Modules
Dimensions
Xtreme Slim modules are available single colour with 6 LEDs and dual or single colour with 12 LEDs per light head.
At only 10mm in height the Xtreme Slim is inconspicuous when installed yet highly visible when lit.
• Supplied complete with fixings and mounting gasket• 6 or 12 high intensity LEDs per unit• Available in 6 or 12-way blue, red, amber and white• Also available in independently switchable dual colour 12-way blue/red, blue/white, amber/red and amber/white• 16 built-in selectable flash patterns• 12/24v operation• ECE R65 (Blue and Amber), USA SAE accredited and e-approved• 5 year warranty
Xtreme Slimline LED Module PART NO. COLOUR AMPS LEDS VOLTAGE
LED-1068-03 Blue (R65) 1.75 max 12 12/24v LED-1069-03 Red 1.75 max 12 12/24v LED-1070-03 Amber (R65) 1.75 max 12 12/24v LED-1071-03 White 1.75 max 12 12/24v LED-1072-03 Blue/Red 1.75 max 12 12/24v LED-1073-03 Blue/White 1.75 max 12 12/24v LED-1074-03 Amber/Red 1.75 max 12 12/24v LED-1075-03 Amber/White 1.75 max 12 12/24v LED-1076-03 Blue (R65) 0.85 max 6 12/24v LED-1077-03 Red 0.85 max 6 12/24v LED-1078-03 Amber (R65) 0.85 max 6 12/24v LED-1079-03 White 0.85 max 6 12/24v
The BX Bullitt range of LED modules are available single, dual or multicolour.
Due to the use of FX technology BX Bullitt modules are low cost, reliable and extremelybright.
Dual colour versions operate in two different colours while multi-colour versions havea choice of 10 different colours, both types have the option to pre-set 2 chosen coloursto operate separately or alternately.
Each model has a clear lens with 3w coloured LEDs and is supplied with a black bezelas standard, they can also be supplied complete with a clear or white bezel at no extracost (please specify when ordering). Replacement bezels and ‘L’ shaped mounting brackets are available to order.
• Supplied with rubber gasket and fixing kit• Multiple modules can be synchronised• Dimming facility• Available blue, red, amber, white and green single colour modules.• Available blue/red, blue/white, amber/red and amber/white dual colour modules• Available as multi coloured modules• Independently switchable dual and multicolour modules• 10 built-in flash patterns• 12/24 volt operation• ECE R65 accredited and e-approved• Ingress protected to IP67• 5 year warranty
BX31 Bullitt PART NO. COLOUR MOUNT LEDs AMPS VOLTAGE LED-970-03 Blue Surface 3 0.5 max 12/24v LED-972-03 Red Surface 3 0.5 max 12/24v LED-971-03 Amber Surface 3 0.5 max 12/24v LED-973-03 White Surface 3 0.5 max 12/24v LED-974-03 Green Surface 3 0.5 max 12/24v LED-975-03 Blue/Red Surface 6 0.5 max 12/24v LED-990-03 Blue/White Surface 6 0.5 max 12/24v LED-976-03 Amber/Red Surface 6 0.5 max 12/24v LED-977-03 Amber/White Surface 6 0.5 max 12/24v LED-969-03 Multi Colour Surface 9 0.5 max 12/24v
BX32 Bullitt PART NO. COLOUR MOUNT LEDs AMPS VOLTAGE LED-978-03 Blue Surface 6 1.0 max 12/24v LED-982-03 Red Surface 6 1.0 max 12/24v LED-979-03 Amber Surface 6 1.0 max 12/24v LED-983-03 White Surface 6 1.0 max 12/24v LED-984-03 Green Surface 6 1.0 max 12/24v LED-986-03 Blue/Red Surface 12 1.0 max 12/24v LED-987-03 Blue/White Surface 12 1.0 max 12/24v LED-988-03 Amber/Red Surface 12 1.0 max 12/24v LED-989-03 Amber/White Surface 12 1.0 max 12/24v LED-985-03 Multi Colour Surface 18 1.0 max 12/24v
BX61 Bullitt PART NO. COLOUR MOUNT LEDs AMPS VOLTAGE LED-956-03 Blue Surface 6 1.0 max 12/24v LED-992-03 Red Surface 6 1.0 max 12/24v LED-991-03 Amber Surface 6 1.0 max 12/24v LED-994-03 White Surface 6 1.0 max 12/24v LED-995-03 Green Surface 6 1.0 max 12/24v LED-997-03 Blue/Red Surface 12 1.0 max 12/24v LED-998-03 Blue/White Surface 12 1.0 max 12/24v LED-990-03 Amber/Red Surface 12 1.0 max 12/24v LED-1000-03 Amber/White Surface 12 1.0 max 12/24v LED-996-03 Multi Colour Surface 18 1.0 max 12/24v
BX62 Bullitt PART NO. COLOUR MOUNT LEDs AMPS VOLTAGE LED-1001-03 Blue Surface 6 2.0 max 12/24v LED-1003-03 Red Surface 6 2.0 max 12/24v LED-1002-03 Amber Surface 6 2.0 max 12/24v LED-1004-03 White Surface 6 2.0 max 12/24v LED-1005-03 Green Surface 6 2.0 max 12/24v LED-1007-03 Blue/Red Surface 12 2.0 max 12/24v LED-1008-03 Blue/White Surface 12 2.0 max 12/24v LED-1009-03 Amber/Red Surface 12 2.0 max 12/24v LED-1010-03 Amber/White Surface 12 2.0 max 12/24v LED-1006-03 Multi Colour Surface 18 2.0 max 12/24v
BX31
BX32
BX61
BX62
NEW
EMC
ECE R65!!
Dimensions
External Vehicle Hazard Warning LED LightingSection 2 :External LED
Micro-Lite 4 LED ModuleThe NEW Micro-Lite 4 LED module is ideal for vehicles which require lowprofile lighting in areas with limited space.There are 4 latest generation LEDs incorporated into the design of the ML4 alongwith integrated optics which help provide an intense light output.Available in the standard single colours this unit is also available in dual colour whichare independently switchable as well as having stop/tail and indicator options.
• Supplied as a complete unit with ultra-strong self-adhesive foam backing • Multiple modules can be synchronised to flash simultaneously• 6 built-in flash patterns• Available in blue, red, amber and white as well as blue/white, blue/red and amber/red independently switchable. Also available as stop/tail and indicator lamps.• 12/24 volt operation• Ingress protected to IP66• 2 year warranty• e-approved
Micro-Lite 4 LED Modules PART NO. COLOUR DESCRIPTION AMPS VOLTAGE LED-763-03 Blue LED Module 0.20 max 12/24v LED-764-03 Red LED Module 0.20 max 12/24v LED-762-03 Amber LED Module 0.20 max 12/24v LED-766-03 White LED Module 0.20 max 12/24v LED-783-03 Blue/White Independently Switchable LED Module 0.20 max 12/24v LED-770-03 Blue/Red Independently Switchable LED Module 0.20 max 12/24v LED-769-03 Amber/Red Independently Switchable LED Module 0.20 max 12/24v LED-767-03 Amber Indicator Lamp 0.20 max 12/24v LED-768-03 Red Stop/Tail Lamp 0.20 max 12/24v ACC-294 Mounting Bracket
Micro Burst LED Module KitMicro Burst LED module kits have two powerful, ECE R65 approved warning lamps in amber or blue.
Set the modules into the vehicle body work for an unobtrusivelight source with astounding brightness when in use.
• Supplied with two LED light heads, 4 high intensity LEDs per head• 14 built-in selectable flash patterns• Multiple units can be linked to flash simultaneously or alternately• Recalls last flash pattern on power up• Supplied with 1.8m LED controller cable and 2m extension cable• 5 year LED warranty, ECE R65 and e approved• 12/24v operation
Micro Burst LED Modules PART NO. COLOUR AMPS VOLTAGE LED-898-03 Blue 1.2 max 12/24v LED-897-03 Amber 1.2 max 12/24v
Dimensions
EMC !
SAE
EMC !!
ECE R65!
Micro Blast LED Modules
Dimensions
Micro Blast LED modules are supplied as single unitshaving the control unit built in to the bodywork of themodule.
The Micro Blast is extremely low profile when set in to the body work while the 3 high powered LEDs provide excellentlight intensity.
• Supplied as a single light head• 3 high intensity LEDs per unit• Available in blue, red, amber and white• 16 built-in selectable flash patterns• Multiple units can be linked to flash simultaneously or alternately• 12/24v operation• ECE R65 accredited (Blue and Amber) and e-approved• 5 year warranty
Micro Blast LED Modules PART NO. COLOUR AMPS VOLTAGE LED-1040-03 Blue (R65) 1.0 12/24v LED-1041-03 Red 1.0 12/24v LED-1042-03 Amber (R65) 1.0 12/24v LED-1043-03 White 1.0 12/24v
EMC !ECE R65OPTIONS !
Optional MountingBracket
NEW
The Securi LED Lamp is perfect where a large light footprint and high outputis required. It is also an exceptional hazard warning lamp when installed inflashing mode.This compact LED head is available as an adjustable bracket mounted unit or as asurface mount unit.
• Supplied complete with appropriate mounting options and fixings• Multiple modules can be configured to flash simultaneously or alternately• Quad flash only• Integral cable entry• Available in blue, red, amber and white• 12/24 volt operation• Ingress protected to IP67• 1 year warranty• e-approved, ECE R65 approved (Amber and Blue)
The SQ4 has dual functionality. It is an exceptional hazard warning lampwhen installed in flashing mode and ideal for use as a scene light if set tosteady burn.
This compact LED head features a clear polycarbonate lens, robust aluminium housing with four high power LEDs.
• Supplied complete with adjustable ‘U’ shaped mounting bracket• Additional ‘U’ shaped bracket and optional ‘L’ shaped bracket available to order• Multiple modules can be configured to flash simultaneously or alternately• 19 built-in flash patterns• External cable entry• Available in blue, red, amber and white• 12/24 volt operation• Ingress protected to IP67• 3 year warranty• e-approved
Surface MountSecuri LED Lamp
Bracket MountSecuri LED Lamp
SQ4 LED Lamp PART NO. COLOUR AMPS VOLTAGE LED-621-03 Blue 0.55 max 12/24v LED-619-03 Red 0.55 max 12/24v LED-620-03 Amber 0.55 max 12/24v LED-622-03 White 0.55 max 12/24v
Mounting Brackets PART NO. DESCRIPTION 13-1294 Additional Heavy Duty ‘U’ Shaped Bracket 13-1293 Optional ‘L’ Shaped Bracket
IDEAL FOR
UTILITY
APPLICATIONS
Securi LED Lamp
Dimensions
Bracket Mount PART NO. COLOUR AMPS VOLTAGE LED-789-03 Blue 1.5 max 12/24v LED-790-03 Red 1.5 max 12/24v LED-788-03 Amber 1.5 max 12/24v LED-791-03 White 1.5 max 12/24v
Surface Mount PART NO. COLOUR AMPS VOLTAGE LED-785-03 Blue 1.5 max 12/24v LED-786-03 Red 1.5 max 12/24v LED-784-03 Amber 1.5 max 12/24v LED-787-03 White 1.5 max 12/24v
Additional Heavy Duty‘U’ Shaped Bracket
Optional ‘L’ Shaped Bracket
Surface Mount Bracket Mount
EMC !SAE !
EMC !ECE R65OPTIONS !
Dimensions
The Circular Cluster has been primarily developed for vehicle warningwhere finding space and a flat surface to fit is a challenge.
The LED Cluster has an in-built flasher circuit which can provide an alternating orsynchronised flash pattern, when synchronised with other LED Cluster modules.
Primarily designed for installation to motorcycles, and having an anodised aluminiumhousing the LED cluster provides an excellent IP67 sealed warning system.
• 3 latest generation LEDs per cluster• High intensity, wide angle internal optic• Multiple modules can be configured to flash simultaneously or alternately• Available in blue, red, amber and white• Ingress protected to IP67• 12/24 volt operation• 2 year warranty• e-approved
Circular Cluster LED Lamp PART NO. COLOUR AMPS VOLTAGE
LED-696-03 Blue 0.20 max 12/24v LED-698-03 Red 0.20 max 12/24v LED-697-03 Amber 0.20 max 12/24v LED-695-03 White 0.20 max 12/24v
Circular Cluster LED Module
Dimensions
Circular Cluster LED Lamp
PART NO. DESCRIPTION COLOUR AMPS VOLTAGE
REG-001 Heavy Duty - Flat Bumper Blue 0.8/0.44 max 12/24v
REG-004 Heavy Duty - Flat Bumper Amber 0.8/0.44 max 12/24v
REG-002 Lightweight - Curved Bumper Blue 0.8/0.44 max 12/24v
Stealth RegPlate Number Plate Warning System
External Vehicle Hazard Warning LED LightingSection 2 :External LED
The Stealth RegPlate was created to meet customer requests for specifichazard warning requirements suitable for frontline vehicles.
The unit was initially designed for use on vehicles with a flat front bumper and wasan immediate success. We then developed a lightweight flexible version that wouldfit the majority of vehicles with a curved front bumper.
All devices comprise of two vertical 6-way slimline LED modules set into each end of a robust, weatherproof housing. Simply remove the number plate from the vehicle,secure the Stealth RegPlate in its place and attach the original number plate to thefront of the unit, thereby creating a discreet warning light that illuminates to the sidefrom the front of the vehicle.
In addition to providing an extra warning light at a critical angle, it also blends intothe bodywork when not in use making it ideal for covert applications.
Designed to fit standard number plate apertures the RegPlate operates at 12v and24v and is available in blue and amber.
• Two Mini Stealth 6-way LED Modules set to flash continuously and simultaneously• Robust, weatherproof housing• Available in blue and amber as specified below• 12/24 volt operation• Standard warranty on product, 3 year warranty on the LED modules• e-approved
Lightweight - Curved Bumper
Heavy Duty - Flat Bumper
Heavy Duty - Flat Bumper
Flat Bumper Curved Bumper
EMC !
EMC !
Internal LED lighting is hazard warning lighting systems installedwithin the vehicle. The majority of these type of products areclassed as temporary units and are used in vehicles that may beused as a persons personal form of transportation when off duty.They are easily removed and replaced as required.
Not only do we have a range of tried and tested LED dashlights in a variety of colours to cover both the Emergency, Commercial and Road SideVehicle Services, we have also assessed the market and taken on boardcustomer feedback to develop products that are unique to RSG.
All products supplied by RSG are designed using the latest maintenancefree technology and built to the strictest industry standards to meet customer demands for quality and reliability.
With energy efficient, next generation LEDs throughout the range they provide amazing light output for very little draw.
MicroMax Diablo II LED-381-01
Temporary Rear Window Warning Light LED-719-03
MirrorMaster Windscreen Warning Light LED-941-03
Section 3 :
Internal Vehicle Hazard Warning LED Lightingfor both the blue and amber markets
The compact Titan Xtreme LED dash light incorporates a single ultra-bright 6-way LED module.
It’s size and integral bracket means that it is quick and easy to install and can bestored in the glove box when not in use.
• Supplied complete with cigar plug and suction cups for windscreen mounting• 6 x hi intensity LED’s • 19 built-in selectable flash patterns• Available in blue, red, amber and white• 12/24 volt operation• 3 year warranty• e-approved
Titan Xtreme LED Dash Warning Light Dimensions
Titan Xtreme LED Dash Light PART NO. COLOUR AMPS VOLTAGE
LED-527-03 Blue 0.92 max 12/24v LED-525-03 Red 0.92 max 12/24v LED-526-03 Amber 0.92 max 12/24v LED-528-03 White 0.92 max 12/24v
Internal Vehicle Hazard Warning LED LightingSection 3 :Internal LED
The Micromax Xtreme II LED dash light incorporates twin ultra-bright 6-way LED modules with laser cut optic technology for an extra wide viewing angle.
Supplied complete with cigar plug power adaptor, integral flashback shield, adjustable mounting bracket, suction cups for attaching to the windscreen and adhesive velcro pads for mounting to the dash.
• 12 x hi intensity LED’s • 26 built-in selectable flash patterns• Available in blue and amber• 12 volt operation only• 3 year warranty• e-approved
Micromax Xtreme II LED Dash Warning Light
Dimensions
Micromax Xtreme II LED Dash Light PART NO. COLOUR AMPS VOLTAGE
LED-471-01 Blue 1.40 max 12v LED-512-01 Amber 1.40 max 12v
The Micromax Diablo II LED dash light incorporates twin ultra-bright 4-way Diablo LED modules with extra wide viewing angle.
Supplied complete with cigar plug power adaptor, integral flashback shield, adjustable mounting bracket, suction cups for attaching to the windscreen and adhesive velcro pads for mounting to the dash.
• 8 x hi intensity LED’s • 26 built-in selectable flash patterns• Available in blue, red, amber and white• 12 volt operation only• 3 year warranty• e-approved
Micromax Diablo II LED Dash Warning Light
Dimensions
Micromax Diablo II LED Dash Light PART NO. COLOUR AMPS VOLTAGE
LED-360-01 Blue 1.40 max 12v LED-379-01 Red 1.40 max 12v LED-380-01 Amber 1.40 max 12v LED-381-01 White 1.40 max 12v
MirrorMaster LED Windscreen Warning Light
Single LED MirrorMaster PART NO. COLOUR AMPS VOLTAGE LED-908-03 Blue 0.2 max 12/24v LED-942-03 White 0.2 max 12/24v LED-909-03 Amber 0.2 max 12/24v LED-910-03 Blue/White 0.2 max 12/24v
Double LED MirrorMaster PART NO. COLOUR AMPS VOLTAGE LED-941-03 Blue 0.4 max 12/24v LED-943-03 White 0.4 max 12/24v LED-913-03 Amber 0.4 max 12/24v LED-912-03 Blue/White 0.4 max 12/24v
Dimensions
The MirrorMaster has been upgraded to incorporate one or two Micro-Lite4 LED modules. The ultra-bright 4-way modules are set within a customdesigned, vacuum formed plastic shroud. Upgrading the LEDs has resulted in vastly improved light output, increasingvisibility at a much greater distance.Permanently mounted onto the vehicle windscreen to the front of the rearview mirror so as not to obscure the drivers vision ensures that theMirrorMaster meets current ‘MOT’ requirements.• 4 or 8 hi intensity LED’s • 6 built-in selectable flash patterns• Permanent mount with double sided foam tape to prevent flash back• Pack out with extra foam tape to match windscreen rake-not supplied• Available in blue, white, amber and blue/white• 12/24 volt operation• 2 year LED warranty• e-approved
DoubleLED Unit
SingleLED Unit
EMC !SAE !
EMC !
Dimensions
Internal Vehicle Hazard Warning LED LightingSection 3 :Internal LED
The Rear Window Warning Light has amazing light output via 2 x 3-way blueand 2 x 3-way red Diablo LED modules set into a custom moulded PVC housing.
Part of the success of this product is the extremely strong and fully adjustable suctionmounting bracket which allows the unit to be fitted in the vehicle rear window andadjusted to match it’s angle. In addition, the suction cup’s quick release mechanismmeans that it can be quickly and easily transferred between vehicles.
The unit is 12/24v and is supplied with a 1m un-terminated lead as standard or withone of the additional switching options shown. We also have a variety of switches,connectors, and extensions available if required, please contact our dedicated salesteam for a quotation.
• Blue and red modules independently switched via separate power feeds• Fully adjustable, strong, quick release suction mounting bracket• Supplied with carry bag and adjustable slider plate to reduce ‘flash back’• 1 metre standard cable length (no switches)• 8 x hi intensity LED’s • 26 built-in selectable flash patterns• Available in blue/red only• 12/24 volt operation• 12 month warranty• e-approved
Temporary Rear Window LED Warning Light
Temporary Rear Window Warning Light PART NO. DESCRIPTION AMPS VOLTAGE
LED-719-03 1 metre lead - no switches 0.35 per module 12/24v LED-719-04 3 metre lead - switched cigar plug 0.35 per module 12/24v LED-752-03 5 metre lead - in-line switch box 0.35 per module 12/24v
LED-752-03REAR WINDOW WARNING LIGHTCIGAR PLUG, IN-LINE SWITCH & 5m LEAD
LED-719-04REAR WINDOW WARNING LIGHTSWITCHED CIGAR PLUG & 3m LEAD
LED-719-03REAR WINDOW WARNING LIGHT1m LEAD - NO SWITCHES
Fixed LED Message Display with Controller - RED MES-107Fixed LED Message Display with Controller - AMBER MES-110Message Display USB Programming Interface 12 MES-113
Permanently mount in the vehicle in its normal operating position.
Overall dimensions: 680mm x 155mm x 40mmMessage display area: 580mm x 120mm
FLIP-UP LED MESSAGE DISPLAY UNIT
DESCRIPTION PART NO
Flip-up LED Message Display with Controller - RED MES-108Flip-up LED Message Display with Controller - AMBER MES-111Message Display USB Programming Interface 12 MES-113
Mount where it would normally be viewed so that it becomes visible when flipped up.
Overall dimensions: 660mm x 180mm x 50mmMessage display area: 580mm x 120mm
FLIP-DOWN LED MESSAGE DISPLAY UNIT
DESCRIPTION PART NO
Flip-down LED Message Display with Controller - RED MES-109Flip-down LED Message Display with Controller - AMBER MES-112Message Display USB Programming Interface 12 MES-113
Mount where it would normally be viewed so that it becomes visible when flipped down.
Overall dimensions: 660mm x 180mm x 50mmMessage display area: 580mm x 120mm
LED Message Display Units incorporate extra large LEDs, each ofwhich has it’s own individual flash back shield to prevent light dissipation and increase visual clarity, they are specifically manufactured for this product allowing the message to be read up to 150 metres away.
Up to 2000 characters are either pre-programmed in-house at RSG, or a programming tool which operates in conjunction with a PC may be purchased to enable you to program your own unique messages.
Simply scroll through the messages via the easy to use handset until you find the message you require. Messages can be static, flashing, cycling andscrolling for ganged units. On start up the handset remembers the last message displayed.
Three options of Message Display Unit are available; fixed for a permanentviewing position; flip-up and flip-down which are motorised and fold neatlyaway, ideal for covert use.
PLEASE NOTE:
Red Units: The ‘RED’ colour LED version is now not recommended by theDepartment of Trade for use on new installations in England. As such this device should only be used as a replacement device on an existing vehicle or to maintain colour continuity across an existing fleet and noting that ‘RED’units may be used for no more than 3 years in England from 2nd May 2013.
Amber Units: The ‘AMBER’ colour LED version is now recommended by theDepartment of Trade for new vehicle installations in the England.
For definitive advice: Please consult the organisation who will be usingthe display unit to confirm the appropriate colour for their use.
LED Message Display Units
150 METRESRSG’s LED Message Display Units are manufactured with extra large
LEDs so they can be seen from a distance of up to 150 metres.*
It takes only 5.5 seconds to cover 150 metres at 70mph!*When a single static message is displayed in ideal conditions, noting that this will be reduced to 120 metres for flashing or scrolling messages.
Top line shows displayed message
Bottom line scrolls throughavailable messages
Message Master LED Warning Sign Matrix Kits
DESCRIPTION COLOUR PART NO
Message Master (fixed) with Controller AMBER MES-186-03Message Master (fixed) with Controller WHITE MES-187-03Message Master (fixed) with Controller RED MES-185-03
Spare Units
DESCRIPTION COLOUR PART NO
Message Master (fixed) AMBER MES-192-03Message Master (fixed) WHITE MES-193-03Message Master (fixed) RED MES-191-03O-LED Touch Screen Control Panel - MES-194-03Extension Lead for Touch Screen Control Panel - 31-1013
The new surface mount Message Master warning sign matrixfeatures new electronics, the latest LEDs and a new touch screenO-LED control panel, taking message display into a new age!
It’s low profile design has a sealed enclosure and connections whichare ingress protected to IP67. All versions operate at both 12v and 24v.
The high brightness LED display with extra wide viewing angle has co-moulded TIR optics producing 10mm pixels. Optically tinted lensescreate high contrast which therefore improves legibility while reducingsunshine washout.
The unit is supplied complete with an O-LED graphic touch screen controller with Micro-SD storage for up to 99 customer programmeablemessages. As well as PC message programming software.
Hard wired versions for fixed messages are available to order, pleasecontact our sales team for further information.
Message Master LED Warning Sign Matrix
Internal Vehicle Hazard Warning LED LightingSection 3 :Internal LED
Red Units: The ‘RED’ colour LED version is now not recommended by the Department of Tradefor use on new installations in England. As such this device should only be used as a replacement device on anexisting vehicle or to maintain colour continuity across an existing fleet and noting that ‘RED’ units may be used for no morethan 3 years in England from 2nd May 2013.
Amber Units: The ‘AMBER’ colour LED version is now recommended by the Department of Trade for new vehicle installations in the England.White Units: The ‘WHITE’ colour LED version can only be used forward facing in the UK.For definitive advice: Please consult the organisation who will be using the display unit to confirm the appropriate colour for their use.
PART NO. COLOUR AMPS VOLTAGE LED-827-03 Blue 5.0 max 12/24v LED-828-03 Red 5.0 max 12/24v LED-829-03 Amber 5.0 max 12/24v LED-830-03 White 5.0 max 12/24v
The Duo 1 is ideal for areas in a vehicle where there is very little space, such as wing/door mirrors to fit a conventional LED head along with it’s driver electronics.
Simply secure each light head behind an 11mm hole in the selectedarea and mount the driver unit in a more secure/convenient position for an unobtrusive yet powerful light source, excellent for use in covert vehicles.
The kit is 12/24v with just 500mA maximum current draw andhas an impressive light output of 32 Lumens per light head.
• Two LED light heads containing a single 3w LED in each supplied complete with an integral driver unit• 2 x Osram LEDs in Blue, Red, White or Amber• 6 built-in flash patterns• Multiple units can be synchronised• 12/24v operation• e approved• 2 year warranty
Dimensions: Each LED light head is 20mm diameter x 8mm highwhile each LED optic is only 9mm diameter x 8mm high.
Colour CCTV Reversing KitsNEW
Colour Length Part Number
WHITE 1m LED-925-01 WHITE 5m LED-926-01 BLUE 1m LED-927-01 RED 1m LED-928-01 AMBER 1m LED-929-01 GREEN 1m LED-930-01
Colour Length Part Number
WHITE 1m LED-931-01 - - - BLUE 1m LED-932-01 RED 1m LED-933-01 AMBER 1m LED-934-01 GREEN 1m LED-935-01
Flexible LED Light Strip
Centre LED Strip Side LED Strip
SIDE LED STRIP
CENTRE LED STRIP
NEW12v, waterproof, Flexible LED light strip with strong self adhesivebacking, can be cut and wired every 3 LEDs (requires soldering).
60 bright LEDs per metre either running along the centre, or, at one edgeof the strip.
• Compact UV stable, waterproof resin strip• 60 LEDs per metre• Available in White 1m and 5m lengths (centre LED strip only) or Blue, Red, Amber and Green in 1 meter lengths• 12v operation
Our new range of remote control CCTV kits allow drivers toreverse more safely by improving visibility and reducing blindspots. Health and safety is a priority for all businesses.
The 5” and 7” colour CCTV reversing kits are built to the highest standardsand include 20 metres of shielded cable ideal for installation in trucks and industrial vehicles, a best performance CCD camera and waterproof 4-pin connectors.
The 1/3” CCD cameras have a day/night mode, are audio enabled and ingress protected to IP66.
• 5” or 7” RGB high resolution colour TFT-LCD monitor operating at 12/24v• 1/3” CCD camera operating at 12v• Day/Night mode sensor operated, audio enabled• Innovative 2-camera automatic switch for use with an additional camera• Mirror view option• 20m shielded cable• Remote control
5” Remote Control CCTV Reversing Kit: VID-456-03
7” Remote Control CCTV Reversing Kit: VID-457-03
EMC !
Titan Xtreme LED-527-03
Mini Stealth LED-634-03
Mini Stealth LED-632-03
LED Message Display Unit MES-108
SAE !
SPEC 5 !
CAP 168
ECE R10
ECE R65!
Traffic Signs Manual - Chapter 8 Requirements
‘Chapter 8’ in the UK Government Traffic Signs Manual are a series of traffic safety measures for vehicles situated at road works and temporary situations. They include recommendations for vehicle warning lights, including beacons, when a vehicle is stopped on the highway for works purposes or inspections, as well as entering, leaving or moving within a works site and when travelling in traffic at less than general traffic speed. For more information visit www.gov.uk/governmentpublications/traffic-signs-manual.
The manual ‘suggests’ that vehicles in road side works or inspections should be equipped with either a roof mounted amber lightbar, comprising of at least ‘two independent light sources’ or ‘two independent’ roof mounted amber beacons’, visible through 360 degrees.In some European countries, which is the case in the UK, all amber warning products used must comply with the requirements of RoadVehicle Lighting Regulations and be ECE Regulation 65 approved to ensure the correct intensity of light output is omitted.
!
!
ECE Regulation 65
This regulation known as ‘United Nations Commission for Europe (UNECE) Regulation 65 on Special Warning Lamps’ covers labelling, lightoutput (intensity and dispersion), flash rate and colour for beacons, lightbars and directional lights, where the key points are briefly:
• Regulation 65 applies to rotating and directional warning lights, such as those utilised in lightbars and additional vehicle lighting.• It sets a standard for colour, light intensity, light distribution and frequency. Heat resistance, cold start and water ingress are also measured.• Manufacturers must ensure that all products carrying this approval consistently comply with the standards.• Customers can have the confidence that products showing this approval, meet the necessary standard in all markets which have adopted ECE Regulation 65.• Regulation 65 is now law in all European Countries and is slowly being adopted in most of them. Although now recognised and accepted in the UK the take up is slow simply because users are not aware of this requirement. As such, education is needed to ensure this regulation is specified as standard on individual, small and large fleets and particularly government vehicles.
Light Output:Each lightbar, beacon or directional light is tested for light intensity and light dispersion to comply with set conditions for Class I or Class II(night and day intensity levels) for its colour range and product category.
Class I (XA1 & XB1) has to achieve the set night light intensity level.
Class II (XA2 & XB2) is able to switch between the set day and night light intensity levels.
For example: a rotating amber beacon would have to meet a set light intensity at 0º and reach a set percentage of light intensity at +/- 8º,through 360º for Class I. To achieve Class II certification the beacon would have to be able to switch to daytime levels, which are 2.3 timesbrighter for amber. This operational switch is manual by the operator and not automatic.
Flash rate:Flash rate between 2 - 4Hz. Lightbars containing more than 2 light sources in each half of the lightbar must be synchronised with each other.
Labelling:Each beacon or lightbar type is submitted for test and certification with detailed drawings of the location of all light sources, general assembly of the product and brand name and model. Any changes to these specifications may mean the unit would require re-testing. All ECE R65 labelling must be clearly visible, together with the brand name and model number.
Electromagnetic Compatibility (ECE R10 EMC)
Electromagnetic Compatibility (EMC) is a major quality feature for optical and acoustic signalling systems and describes two factors:
• Radiated interference: the limitation of radiated electromagnetic interference to a level that guarantees the interference-free operation of other devices in the environment• Immunity to interference: guaranteeing sufficiently high resistance to electro-magnetic interference acting from the outside
SAE J845 USA Standard
SAE is the Society of Automotive Engineers. SAE is comprised of a number of working groups of automotive and lighting engineers thatwork with industry studies and other experts to set standards. SAE sets the standards for all lighting on a vehicle. While SAE is not law inmost areas, it is a best-practices standard that the entire automotive world pays attention to.
Specification 5
In order to supply equipment and systems to the Emergency Services Police Authorities and Fire Service, for automotive use, it must be approved to the Home Office standard that complies with the type of tests that its Automotive and Equipment Section (AES) requires tomeet the latest ‘Version’ of its Specification 5.
Civil Aviation Publication 168 (CAP168)
The correct type of beacon or lightbar must not dazzle flight crew in their elevated position to the ground servicing vehicles. The beacon orlightbar light must be static flash Airport CAP168 Compliant.
Unless otherwise stated RSG’s standard warranty period is a one year return to base service, for full terms and conditions please contactour sales department or view on our website.
