HD-4002DM Quad Input DVB-T HD Encoder / Modulator
User Guide and Install Manual
Table of Contents
Radio Frequency Range
digi-MOD HD-4002DM www.resi-linx.com
Safety Precautions 2
Package Contents 2
Product Description 2
Specification 3
Installation 4
Hardware Installations and Connections 4
Connecting to the GUI Interface: 4
Encoder Programming and Setup via GUI Interface: 5
Overview Page of digi-MOD HD Encoder 5
Common Setup 6
RF Setup 7
Encoder Setup 7
NetworkConfiguration 8
Administration 9
Savingyourconfigurationfiles 9
Front Panel LCD Encoder Menu Map 10
ModulatorConfigurationviaFrontPanelLCD 11
NetworkSetup 13
HD-4002DM User Guide and Install Manual Page 2
Safety Precautions
Package Contents
Product Description
The presence of this symbol is to alert the installer and user to the presence of uninsulated dangerous voltages within the product’s enclosurethatmaybeofsufficientmagnitudetoproduceariskofelectricshock.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
• Do not apply power to the unit until all connections have been made, all components have been installed and all wiring has beenproperlyterminated.
• Do notterminate,changeoruninstallanywiringwithoutfirstdisconnectingtheunit’spoweradapterfromthedevice.• Thisdeviceissuppliedwiththeappropriatelyratedpowersupply.Theuseofanyotherpowersupplycouldcausedamageand
invalidatethemanufacturer’swarranty.• Do notconnectthepowercordtothedeviceifthepowercordisdamaged.• Do notcutthepowercord.• Do notplugthepowercordintoanACoutletuntilallcablesandconnectionstothedevicehavebeenproperlyconnected.• Thedeviceshouldbeinstalledinanenvironmentconsistentwithitsoperatingtemperaturespecifications.Placementnextto
heatingdevicesandductsistobeavoidedasdoingsomaycausedamage.Thedeviceshouldnotbeplacedinareasofhighhumidity.
• Do notcoveranyofthedevice’sventilationopenings.• Do notcoverorobstructthedevice’sfanorfanopenings.• If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before connecting to an
ACoutlet.
This package contains:
• One HD-4002DM Encoder / Modulator*• One power cable• Oneinstallation/configurationmanual
Inspectthepackagebeforestartinginstallationtoensurethereisnodamageandallsuppliedcontentsarepresent.Contactyourdistributorordealershouldthedevicebedamagedorpackagecontentsareincomplete.
Resi-linxdigi-MODHDSeriesEncoder/ModulatorsprovidesaDVB-T-makingitidealforanyCommercialRFNetwork.ThehighqualityHDdesignallowsforwatchingactionpackedmoviesandsportschannelsonanyHDTV.TheoptionalAC-3DolbyAudioandAES-128Encryptioncapabilitiesroundsoutthefeaturerichproductseries.Thespacesavingdesigndeliversupto4HighQualityHDDVB-Tchannelsinasingle1RUspace.
• Front panel LCD Display for easy installation• HighResolutionupto1080i/1080p• LCN MODE• Composite, Component, and HDMI (unencrypted) inputs• MPEG2orMPEG4(H.264)VideoOutput
• Selectable Constellation• Closed Captioning Support• 100dB Output• Newly Added EAS Functionality*• Rack mountable 1RU height
Front Panel
Rear Panel
HD-4002DM User Guide and Install Manual Page3
Specification
VIDEO INPUTS (VIDEO BY PRIORITY)
HDMI 1.4vComponent YPrPb (RCA)Composite CVBS (RCA)
AUDIO INPUTS
Audio Inputs L/R (RCA)
VIDEO ENCODER
Mode MPEG-2,MPEG-4(H.264)Video Resolutions 1080p(MPEG-4Only),1080i,720p,576p,576i,480p,480i
AUDIO ENCODER
Audio Compression MPEG-1LayerII,AAC,AC-3(Optional),AC-3PassThrough
RF DVB-T SUPPORT
Frequency Channel Plan - Varies by CountryRF Channel Output 4multiplexedonto2RFOutputConstellation 64QAM (16QAM)Bandwidth 7 MHzRF Level Output 100dBMER >40dB TypicalFEC 1/2,2/3,3/4,5/6,7/8Guard Interval 1/4,1/8,1/16,1/32OFDM 8K(2K)Attenuation 1-20dB (1dB steps)RF Output "F" - Female 75 ohmClosed Captioning Control By Selection (use of CVBS Input)
IP OUTPUT
Streaming Protocols Multicast, UnicastVideo Encoding MPEG-2,MPEG-4(H.264)
MANAGEMENT / CONTROL
Front Panel LCD Control FullSupport(Up/Down/OKButtons)GUI IE9,Firefox,Chrome,SafariPassword Protected Front Panel, GUI
GENERAL
Rack Mountable (1RU) 482.7mmx240mmx44.4mm-19"EIAStandardInternal Fan Cooled Dual InternalLCD Front Panel Dual Line, Scrolling Display
**Subject to change without notice
HD-4002DM User Guide and Install Manual Page 4
System Installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
UNPACKING AND INSPECTION
Eachunitisshippedfactorytested.Ensureallitemsareremovedfromthecontainerpriortodiscardinganypackingmaterial.
Thoroughlyinspecttheunitforshippingdamagewithparticularattentiontoconnectorsandcontrols.Ifthereisanysignofdamagetotheunitordamagedorlooseconnectorscontactyourdistributorimmediately.Donotputtheequipmentintoserviceifthereisanyindicationofdefectordamage.
Itishighlyrecommendedthatqualitycablesandconnectorsbeusedforallvideoandaudiosourceconnections.
1. TheunitisdesignedtoberackmountedinastandardEIA19”rack.
2. TheunitcomesstandardwithHDMI,Component,andCompositevideoinputs.TheHDTencoder/modulatorareintelligentlydesignedtodetectthevideoinputfromthevideosource.HDMI Connection: Connect the HDMI cable(s) from the video source(s)intotheHDMIinput(s).IfusingaComponent Video Cable, connect the Y (Green), Pb (Blue), and Pr (Red) video sourcecabletotheunit’sComponentinputports.IfusingaComposite Videosource,usea75ΩcoaxialcablewithRCAconnectors to connect the video source(e.g.,CATV,DVD,VCR,Camera)totheunit’sCVBSport(IN1…IN2,IN3,IN4dependingonyourmodel).
3. Repeatthisstepforeachvideosourceconnection.
4. Component / Composite Audio inputs: Connect A/V audio input (Left / Right Audio) use RCA cables to connect the audio source to the red / white AUDIO L and AUDIO R INPUT jacks(IN1…IN2,IN3,IN4dependingonyourmodel).Repeatthisstepforeachaudiosourceconnection.
5. Besurethevideoandaudioconnectionsforeachsourceareconsistentwiththeunit’sinputs(IN1…IN2,IN3,IN4dependingonyourmodel).
6. Useaquality75Ωcoaxialcablewith“F”connectorsfromtheunit’sRF OUT jack to the distribution system (combiner or reversesplitter)ordirectlytoatelevision.
7. IfyourdeviceisequippedwithanIPoutput-connecttheEthernetcabletotheIPoutputRJ45connector.
8. Connect the included power cord to the unit’s POWERplug.
9. ConnectthepowercordtoanappropriatelyratedACpoweroutlet.
TosetupandprogramtheEncoderyoucanusetheGUIinterfaceortheLCDFrontPanel.
1. Connect an Ethernet cable directly (no Cross Over cable required) to the Web Management Port on the rear panel of the encoderorconnecttheEthernetcabletoanEthernetswitch.ConnectanEthernetCabletoyourPC.
2. Using a Windows-based PC Select Windows Icon
3. Go to My Computer
4. Select Network
5. Allow UPnP to locate and list the device(s) in the right panel
6. RightClickandSelect“ViewdeviceWebpage”.
Installation
Hardware Installations and Connections
DEVICE Programming and Setup
Connecting to the GUI Interface
NOTE:For Setup Using Front Panel LCD: Go to page 11 in this manual.
HD-4002DM User Guide and Install Manual Page 5
Afterconnectingthedevicetothe“WebManagement”portlocatedontherearofthedeviceandlocatingthedeviceviathe‘Network’ tool in ‘My Computer’
STEP 1:RightClickandSelect“ViewdeviceWebpage”.
OverviewstatusoftheEncoderwhenfullyfunctioning.AlternatebetweenviewingstatusofRFOutput1andRFOutput2byselectingtheRFOutputsectionofthedeviceyouwanttomonitor.
STEP 2: Login Select Common Setup
Once the Common Setup Tab is selected you will be prompted to enter the user name and password for device:
STEP 3: Common Setup Tab
CommonSetup:UsetheCommonSetupPagetosettheOutputchannel,Attenuation,LCNMode,andDeviceAddress.
Encoder Programming and Setup via GUI Interface
Overview page of resi-linx digi-MOD HD
NOTE:Image displays the Quad version of the HDT Encoder.
Default User Name: adminDefault Password: Admin123
HD-4002DM User Guide and Install Manual Page 6
STEP 4: Local Save
OnceallparametersaresetyouarerequiredtodoaLocalSave.
Notes on Changes: Changes made to an individual setup tab may require the installer to perform a Local Save AND Upload and Reboot to the device if you are only making changes to one parameter to the encoder.
Example: Installer is required to change only the output channel for the device (No other changes to the device are not required). Once the channel has been changed, the installer is required to perform 1. Local Save and 2. Upload and Reboot.
Notes on Channel Selection: The image below shows the Output Channel is set to CH # 21. RF1 will output 1 QAM signal carrying 2 digital audio/video channels (within your device’s Bandwidth settings).
The device will automatically set RF2 to Ch # 22
UsingtheaboveexamplethePhysicalChannelOutputsfortheQuadInputdevicewouldbeset:21.1,21.2and22.1,22.2.
ThebelowdiagramdepictshoweachinputontheQuadEncoderisplacedinRF1orRF2.
TheQuadEncoderpreventsyoufromselectingthelastchannelinthedeviceasthefirstphysicalchannelforthedevice’soutputchannel.SelectCH#68(809.5MHz)fortheoutputchannelandthedevicewillautomaticallysetRF2asCH#69(816.5MHz).
SettingtheOutputChanneltoCH#68wouldresultinthefollowingRF1/RF2configuration(seebelow)
NOTE:Channel 68 is the last channel accessible to select. In this example CH #68 can be selected as RF1 and the device will automatically set RF2 as CH #69. CH #69 can not be set as RF1.
RF1
RF1
IN-1
IN-2
IN-1
IN-2
CH #21
CH #68
RF2
RF2
IN-3
IN-4
IN-3
IN-4
CH #22
CH #69
NOTE:The RF2 Physical Channel Output is determined by the selection of output channel of RF1.
HD-4002DM User Guide and Install Manual Page 7
STEP 5: RF Setup
UsetheRFSetupPagetosetupeachRFOutput.
Select RF Output 1 or RF Output 2.Selectandsettherequiredparametersyourequireforyourinstallation.
STEP 6: Local Save
OnceallparametersaresetyouarerequiredtodoaLocalSave.
NOTE:ThedeviceshownisaQUADinputdevice.Yourdevicewillnot show RF Output 2 if you are setting up a Single or Dual inputencoder.
STEP 7: Encoder Setup
Select the Encoder 1, 2, 3, 4 tab toprogramanindividualencoder.Select and changealldesiredparameters.
NOTE:There is an Encoder tab present for each input on the device.
HD-4002DM User Guide and Install Manual Page8
STEP 8: Local Save for each Encoder tab
Once all parameters are set you are required to do a Local Save on EACH Encoder Tab where changes were performed
IMPORTANT NOTE:Ensure all Encoder changes have been locally saved before performing Step 9.
Note: Local Save function will indicate the local change made
Upload and Reboot after all changes have been made and a Local Save performed
STEP 9: Upload and Reboot
Once you have set all the encoder settings and performed a Local Save for each encoder
Select “Upload and Reboot”afteryouhavesavedallyourLocalchangesoneachTab.ThisfunctionwilluploadandsaveallparameterssetintheCommon,RF,andEncodersectionsofthedevice.
Wehighlyrecommendyousaveyourencoderconfigurationfiles.SeeAdministrationtabforhowtobackyoudevicesettings.
STEP 10:NetworkConfigurationTab
UsetheNetworkSetupTabtoconfigurethedevice’sIPaddress,SubnetMask,Gateway,Enable/DisableDHCP,andsetHostName.
HD-4002DM User Guide and Install Manual Page 9
STEP 11:SaveNetworkConfiguration
Save Config: Once all parameters are set you are required to select Save Config. ThisfunctionwillrebootandsavethechangessettingfortheNetworkConfiguration.
STEP 12: Administration
NOTE:Only the Network Configuration changes will be saved.
ADMINISTRATION PAGE FUNCTIONS ACTIONS
Reboot Rebootdevice.Allunsavedsettingswillbelost.
Reset to Default Reset all settings back to original factory settings
Backup Download all settings of device
Upload Uploadasavedconfigfile
New Password Create and save new password for GUI
STEP 13:Ifrequired,changeGUIPasswordandSubmit.
ThispasswordisforaccesstotheGUIonly.TheLCDfrontPanelPasswordwill notbechangedandissettopreventunauthorizedusersaccesstoyourdevice.
IMPORTANT NOTE:We highly recommend you save your encoder configuration files. Simply Click the “Backup” button and the config files will be saved to your computer.
NOTE:When setting a new password you must use the ‘Submit’ button.
Touploadaconfigurationfile-simplyclick“ChooseFile”thenlocatethefileyouwanttoupload.Click“Upload”toinstalltheconfigurationfiles.Thisfunctionishelpfultotheinstallerwheninstallingalargenumberofencodersinasinglesystem.
Savingyourconfigurationfiles
HD-4002DM User Guide and Install Manual Page 10
Front Panel LCD Encoder Menu Map
COMMON SETUPOutput ChannelAttenuationLCN ModeDevice AddressDefaultConfiguration
Back to MainRF SETUP
Select RFEnable RFConstellationFECGuard IntervalOFDMRF OutputCell IDRF TS IDNetwork IDOrg Network IDNetwork Name
Back to MainENCODER SETUP
Select EncoderVideo InputProgram NumChannel NameProvider NameLCNAspect RatioVideo OutputHDCPAudio InputAudio OutputClosed CaptionBrightnessContrastSaturationHue
Back to MainIP STREAMING
Network SetupStreaming Setup
Back to MainWEB MANAGEMENT
DHCPIP AddressSubnet MaskGateway
Back to MainEXIT
HD-4002DM User Guide and Install Manual Page 11
Oncetheencoderispoweredupitwillgothroughitsinitialbootingprocess.Oncetheunithascompleteditsinitial“Booting”upprocesstheLCDwilldisplayIN-1...,BitRateinformation,Channel-1....,andotherinformationintheLCDDisplayWindow.Whenvisibletheunitisreadyforprogrammingoroperation.
TheLCDwilldisplaydataasitcyclesthroughtheavailableinformation.
SCREEN VIEWS
1. Inputs, Mbps, Channel Names, Video Output Type, Audio Output type
2. Use the Scroll Up/Down button to display RF-1 / RF-2 data, Physical Output Channel, Constellation, FEC setting, OFDMModeSelection.
3. Use the Scroll Up/Down button to display IP address
COMMON SETUP MENU
• Output Channel –UsetheScrollUp/Downbuttontochangetheoutputchannel. UsetheScrollUp/Downbuttonstoselectthedesiredoutputchannel.Oncethe desiredoutputchannelisselectedpresstheOKbuttontosetthechannel.The LCD Display will show both the channel number and the frequency number of the outputchannel(example:21480.5000MHz).
• Attenuation–UsetheScrollUp/DownbuttontoselectAttenuation.PresstheOK buttontoentertheAttenuationmenu.UsetheScroll/Updownbuttontoselectthe desiredattenuationin1dBincrementsfrom0tominus20dB.Oncethedesired attenuationlevelisfoundpresstheOKbuttontoset.
• LCN –UsetheScrollUp/DownbuttontoselectLCNMODE.PresstheOKbutton toentertheLCNmenu.MenuoptionsareAPN,NORDIG,ITC,andEACEM.Factory default:APN.UsetheScrollUp/DownbuttontoselectthedesiredLCNandpressheOKbuttontoset.
• Device Address–UsetheScrollUp/DownbuttontoselectDeviceAddress.PresstheOKbuttontoentertheDeviceAddressmenu.UsetheScrollUp/DowntoselecttheDesiredAddressrangingfrom1to255thenpressOKtoset.Auniquedeviceaddressisrequiredifsettingupmorethan1encoderpersite.Thisallowstheusertodistinguisheachdevice.
• Default Configuration–ToresettheEncoder/ModulatorbacktothefactorydefaultselecttheDefaultConfigurationMenu.PressOKtoentertheDefaultConfigurationMenu.UsingtheUp/DownbuttonselectYEStoresetallprogrammedsettingsbacktothefactorydefaultsetting.FactoryDefault:NO.
Caution: Once the “YES” button is pressed the unit will automatically reset to the factory default settings. All settings or changes to the encoder/modulator will be lost. • Back to Main–SelectBacktoMaintoescapetheCommonSetupMenu.
• Main Menu–ToaccesstheMainMenufirstenterthepasswordbypressingtheOKbutton.UsetheScrollUp/Downbuttonstoenterthepassword.OncethepasswordisenteredpresstheOKbuttonagainandtheLCDScreenwilldisplay“MainMenuCommonSetup”.
• Password–UsetheScrollUp/Downbuttonstoenterthepassword.Passwordis0000.PresstheOKbuttonforeachnumber toenterthepassword.PressOKagainafterthedisplayshows…...HDSeries.
ModulatorConfigurationviaFrontPanelLCD
NOTE:If your device is a QUAD version the below screen will display all input data as is cycles through the data available.
NOTE:The RF2 Channel Physical output is determined by the selection of output channel of RF1. The Quad Encoder prevents you from selecting the last channel in the device. **See page 9 of this manual for more information on this topic.
HD-4002DM User Guide and Install Manual Page 12
RF SETUP MENU
• Select RF–PresstheOKbuttontoentertheSelectRFmenu.UsetheScrollUp/DownbuttontoSelecttheRFsectionoftheEncoder.Select1orSelect2.ThesingleandDualversionsofthisproductwillhaveSelect1only
• Constellation–UsetheScrollUp/DownbuttontoselectConstellation.PresstheOKbuttontoentertheConstellationmenu.SelectthedesiredConstellation/QAMsettingthenpresstheOKbuttontoset.
• FEC–UsetheScrollUp/DownbuttontoselecttheFECmenu.PresstheOKbuttontoentertheFECmenu.UsetheScrollUp/DownbuttontoselectthedesiredFECsettingandpresstheOKbuttontoset.
• Guard Interval–UsetheScrollUp/DownbuttontoselectGuardInterval.PresstheOKbuttontoentertheGuardIntervalmenu.UsetheScrollUp/DownbuttontoselectthedesiredGuardIntervalandpresstheOKbuttontoset.
• OFDM–UsetheScrollUp/DownbuttontoselecttheOFDMmenu.PresstheOKbuttontoentertheOFDMmenu.UsetheScrollUp/DowntoselecttheOFDM2Kor8K.PressOKtoset.
• RF Output –UsetheScrollUp/DownbuttontoselectRFOutput.PresstheOKbuttontoentertheRFOutputmenu.MenuoptionsareNormal,InvertedandC.W.ThefactorydefaultisNormal.UsetheScrollUp/DownbuttontoselectthedesiredRFOutputandpresstheOKbuttontoset.
• CELL ID–UsetheScrollUp/DownbuttontoselectCELLID.PresstheOKbuttontoentertheCELLIDmenu.UsetheScrollUp/DownbuttontoselectthedesiredCELLIDrangingfrom0to65535thenpresstheOKbuttontoset.Factorydefaultis0.
• TS ID–UsetheScrollUp/DownbuttontoselectTSID.PresstheOKbuttontoentertheTSIDmenu.UsetheScrollUp/DownbuttontoselectthedesiredStreamIDrangingfrom0to65535thenpresstheOKbuttontoset.
• Network ID–UsetheScrollUp/DownbuttontoselectNetworkID.PresstheOKbuttontoentertheNetworkIDmenu.UsetheScrollUp/DownbuttontoselectthedesiredNetworkIDrangingfrom0to65535thenpresstheOKbuttontoset.
• ORG Network ID–UsetheScrollUp/DownbuttontoselectORGNetworkID.PresstheOKbuttontoentertheORGNetworkIDmenu.UsetheScrollUp/DownbuttontoselectthedesiredIDrangingfrom0to65535thenpresstheOKbuttontoset.
• Network Name–UsetheScrollUp/DownbuttontoselectNetworkName.PresstheOKbuttontoentertheNetworkNamemenu.UsetheScrollUp/DownbuttontoselectthefirstcharacterforthedesiredNetworkNamethenpresstheOKbuttontoset.RepeattheprocessforeachcharacterinthedesiredNetworkName.ANetworkNamecanconsistupto16characters.
• Back to Main–SelectBacktoMaintoescapetheRFSetupMenu.
ENCODER SETUP MENU
• Select Encoder–UsetheOKbuttontoentertheSelectEncoderMenu.UsingtheScrollUp/Downbuttonsselecttheencoderyouwishtoprogram.UsetheOKbuttontosettheEncoder.SelectEncoder1,2,3,or4basedonyourmodelnumber.OnceSelected the Display will indicate which Encoder you are programming while in the setup function
• Video Input–UsetheScrollUp/DownbuttontoselectVideoInput.PresstheOKbuttontoentertheVideoInputmenu.UsetheScrollUp/DownbuttontoselecttheVideoInputoption:Auto,Composite,Component,orHDMI.Factorydefault:Auto.PresstheOKbuttontoset.TheHDTseriesofEncoder/ModulatorsisdesignedwithIntelligentInputDetection(IID)technology.IfyouselectAuto,theunitwilldetectthevideoinput.
• Program Num–UsetheScrollUp/Downbuttontoset1ProgramNum(Number).PresstheOKbuttontoentertheProgramNummenu.UsetheScrollUp/DowntoselecttheProgramNumrangingfrom1to65535thenpressOKtoset.
• Channel Name –UsetheScrollUp/DownbuttontoselectChannelName.PresstheOKbuttontoentertheChannelNamemenu.UsetheScrollUp/DownmenutoselectthefirstcharacterofthedesiredChannelNamethenpresstheOKbuttontoset.RepeattheprocessuntiltheChannelNameiscompleted.TheChannelNamecanbe7characterslong.FactoryDefault:CHANNEL-1,CHANNEL-2,CHANNEL-3,CHANNEL-4.
• Provider Name–UsetheScrollUp/DownbuttontoselectProviderName.PresstheOKbuttontoentertheProviderNamemenu.UsetheScrollUp/DownmenutoselectthefirstcharacterofthedesiredProviderNamethenpresstheOKbuttontoset.RepeattheprocessuntiltheProviderNameiscompleted..TheProviderNamecanbe16characterslong.
• LCN–UsetheScrollUp/DownbuttontosetLCN.PresstheOKbuttontoenterTheSourceIDmenu.UsetheScrollUp/DowntosettheSourceID.Range:1to999.PressOKtoset.
• Aspect Ratio–UsetheScrollUp/DownbuttontoselectAspectRatio.PresstheOKbuttontoentertheAspectRatiomenu.UsetheScrollUp/DownbuttontoselectthedesiredAspectRatiooptionof4:3or16:9thenpresstheOKbuttontoset.Factorydefault:4:3.
HD-4002DM User Guide and Install Manual Page13
• Video Output–ThisEncoder/ModulatorsmaybeDualMODECapable.TheusermayselecttooutputvideoineitherMPEG2orAVC(MPEG4).UsetheScrollUp/Downbuttontoselect1VideoOutput.PresstheOKbuttontoentertheVideoOutputmenu.UsetheScrollUp/DownbuttontoselecttheVideoOutputoption:MPEG2orAVC.Factorydefault:MPEG2.PresstheOKbuttontoset.
NOTE:The Dual and Quad Input allows the installer to select a combination of Video Output formats. Some versions of this device will allow the user to have both outputs broadcasting in either MPEG2 or MPEG4 (H.264) or a combination of both MPEG2 and MPEG4 (H.264).
NOTE:When using closed captioning- user must connect from the content source the composite output or cc output source to the encoder’s cvbs input connector.
NOTE:It is the installers / property owner / integrator’s responsibity to contract with the service provider regrding content authoization and the use of HDCP.
• HDCP –UsetheScrollUp/DownbuttontoselecttheHDCPmenu-UsetheScrollUp/DownbuttontoselecttheHDCPmenu.PresstheOKbuttontoentertheHDCPmenu.SelectEnable/Disable.EachEncoderwillrequireyoutoEnabletheHDCPoption.
• Audio Input–UsetheScrollUp/Downbuttontoselect.PresstheOKbuttontoentertheAudioInputmenu.UsetheScrollUp/DownbuttontoselecttheAudioInputoption:Analog.FactorySet:Analog.
• Audio Output–UsetheScrollUp/DownbuttontoselectAudioOutput.PresstheOKbuttontoentertheAudioOutputmenu.UsetheScrollUp/DownbuttontoselecttheAudioOutputoption:MP2(MPEG2LayerIAudio),AAC,orAC3.Factorydefault:MP2.PresstheOKbuttontoset.SomeversionsoftheHDTEncoderwillnotallowyoutoselectAC3asanoption.ContactyourDistributorifyourequireanAC3versionofthisdevice.
• Closed Caption–UsetheScrollUp/DownbuttontoselecttheClosedCaptionMenu.PresstheOKbuttontoentertheClosedCaptionmenu.Enable/DisableClosedCaptioncontrol.EachEncoderwillrequireyoutoEnabletheClosedCaptionoptionifyourequireClosedCaptioningSupportonaparticularvideooutput.
• Brightness–UsetheScrollUp/DownbuttontoselectBrightness.PresstheOKbuttontoentertheBrightnessmenu.UsetheScrollUp/DownbuttontoselectthedesiredBrightnessvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Contrast–UsetheScrollUp/DownbuttontoselectContrast.PresstheOKbuttontoentertheContrastmenu.UsetheScrollUp/DownbuttontoselectthedesiredContrastvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Saturation–UsetheScrollUp/DownbuttontoselectSaturation.PresstheOKbuttontoentertheSaturationmenu.UsetheScrollUp/DownbuttontoselectthedesiredSaturationvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Hue–UsetheScrollUp/DownbuttontoselectHue.PresstheOKbuttontoentertheHuemenu.UsetheScrollUp/DownbuttontoselectthedesiredHuevalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Back to Main – Select Back to Main to escape the Encoder Setup Menu
NETWORK SETUP
• Reset Network–SelectResetNetworkfromtheNetworkSetuptoResettheNetworksettings.• Back to Main–SelectBacktoMaintoescapetheEncoderSetupMenu.
HD-4002DM User Guide and Install Manual Page 14
ITEM VALUE
Password
Serial Number
Installation Date
Purchase Date
Video Input 1
Video Input 2
VideoInput3
Video Input 4
HD-4002DM User Guide and Install Manual Page 15
Notes
www.resi-linx.com
WARRANTYVcomm Pty Ltd states that the warrant that the customer can rely on is that provided bythemanufacturer.Intheeventofanywarrantyclaimpleasecontactusandwewillforwardittothemanufacturer.Themanufacturerwillthendeterminetheextentoftheirliability.Thisexpresslynegates,totheextentpossiblebyAustralianlaw,anywarrantyrelianceonVcommPtyLtd.
WARRANTYVcomm Pty Ltd states that the warrant that the customer can rely on is that provided by the manufacturer. In the event of any warranty claim please contact us and we will forward it to the manufacturer. The manufacturer will then determine the extent of their liability. This expressly negates, to the extent possible by Australian law, any warranty reliance on Vcomm Pty Ltd.
www.resi-linx.com
N15275
WARRANTYVcomm Pty Ltd states that the warrant that the customer can rely on is that provided by the manufacturer. In the event of any warranty claim please contact us and we will forward it to the manufacturer. The manufacturer will then determine the extent of their liability. This expressly negates, to the extent possible by Australian law, any warranty reliance on Vcomm Pty Ltd.
www.resi-linx.com
N15275
by