HD

Cold Water High-Pressure Cleanerswith Electric Motor

All-round expertisein high-pressure cleaning

2

Broad range of applications

Kärcher® invented the high-pressure cleaner and applied for the European patent in 1950. Today,

there is hardly a task that cannot be accomplished with a Kärcher® high-pressure cleaner: Cleaning

large surface areas, removing stubborn dirt or getting into difficult-to-reach areas – you can clean

almost anything with Kärcher® high-pressure cleaners.

You’ll find the information you need on the following pages:

Kärcher®’s technical competence Page 4-5

Kärcher® machine classes Page 6-7 Compact class Page 8-11 Medium-duty class Page 12-15 Super class Page 16-17 Special-purpose class Page 18-21

More value through accessories Page 22 Cleaning agents Page 23Accessories Page 24-25Summary Page 26

3

Agriculture and

dairy industry

Livestock pens, yards and

machinery – the versatility of

our high-pressure cleaners is

fully utilised here.

Cleaning vehicles

and machines

Building maintenance

The crafts and trades

are ideally equipped for

routine indoor and outdoor

operations with a Kärcher®

high-pressure cleaner.

Repairing or maintaining

facades and outdoor

surfaces – Kärcher®

machines provide the

professional assistance

required for these tasks.

Areas where strict

hygiene is a must

Strict hygiene regulations

must be observed in profes-

sional applications in

washrooms and kitchens –

Kärcher® high-pressure

clean-ers, cleaning agents

and disinfectants comply with

the latest requirements.

Municipalities Construction industry

From the town park to the

community centre – Kärcher®

high-pressure cleaners ensure

thorough cleanliness in public

places and buildings.

Removing heavy soiling

and stubborn dirt or pre-

paring machinery for work:


cleaners are indispensable

on construction sites.

4

Outstanding nozzle technology

Dirt Blaster Rotating pencil jet with

large area coverage.

Kärcher® high-pressure nozzles are available with four different types

of jet:

Triple nozzle Simply tilted to change from solid

high-pressure pencil jet to high-

pressure fan jet; nozzle body is

rotated to select low-pressure fan

jet.

Power nozzle Sharp-contoured, concentrated

spray jet of large, coherent

droplets increases impact

pressure by up to 40%.

High-pressure pencil jet for full-force

cleanliness.

High-pressure fan jet for high area

coverage.

Low-pressure fan jet for applying

detergents.

Dirt Blaster rotating pencil jet

for large area

coverage.

More than 50 years experience and expertise in high-pressure cleaning

User friendlinessnewEasy Press

new

Servo Control

Servo Control

Ergonomic design and practical technical features simplify

operation:

• Easy Press: Ergonomically shaped trigger gun for reduced

holding and operating effort.

• High-pressure hose and coupling system 2000: Innovative

push-on and screw union systems on trigger gun, hose

and machine prevent seizing and scale build-up.

• Twist-free hoses thanks to pivot mounting (AVS)

• Stainless steel spray lance rotates 360° under pressure for

access to difficult-to-reach areas

• Comprehensive line of special equipment for wide range of

applications.

• Servo Control: Precise, infinitely variable control of

pressure and water flow rate during operation; entire

adjustment range covered by 90° turn.

5

Kärcher® means “simple cleaning”. A comprehensive range

of accessories and specially formulated cleaning agents

are therefore part of our high efficiency cleaning solutions.

Kärcher® offers you machines, accessories, cleaning and

care agents to match your specific application.

Kärcher® hard surface cleaner With rotating Power nozzle beam for up to 10 ten times greater area

coverage.

All-round cleaning competence

Robust motor/pump unit for exceptional service life

• Compact and robust three-piston axial pump.

• Brass cylinder head resistant to extremely high pressures

and detergents.

• The pistons used (stainless steel/ceramic) have an ex-

ceptionally good surface finish to guarantee a low rate of

wear and less maintenance.

• Precision, hard-wearing gaskets and seals rated specifically

for high strength, resistance to abrasion and high

temperatures. Suitable for use with almost all Kärcher®

cleaning agents.

• Precision, high-performance stainless steel valves are

even resistant to stubborn suspended matter and thus

guarantee trouble-free operation.

Longlife pump technology

High efficiency

The latest technology and robust components rated for

the highest loads make Kärcher® high-pressure cleaners

exceptionally economical:

• Three-piston axial pump with detergent resistant brass

cylinder head and stainless steel valves

• Kärcher pressure-controlled shutdown: Motor and pump are

switched off automatically when the trigger gun is closed

• Endurance-tested electric motor with a combination of water

and air cooling.

6

Kärcher® machine classes at a glance:

HD 6/15 C/CX

150 bar/15 MPa

560 l/h

HD 7/18-4M/MX

180 bar/18 MPa

700 l/h

HD 10/25-4S/SX

250 bar/25 MPa

1000 l/h

Water flow rate (l/h)

Pressure (bar)

These versions are available:

SX version Integral hose reel with 15 m /

20 m high-pressure hose.

In addition to the standard models, Kärcher® offers specially

equipped versions:

Plus version With high-performance

Kärcher® Dirt Blaster nozzle.

SX Plus version Machine comes standard with

a hose reel and Kärcher® Dirt

Blaster nozzle.

The performance of a high-pressure cleaner is expressed by two values:

The pressure produced by the pump (in bar) and the quantity of water

delivered per hour (in l/h).

Compact class Medium-duty class Super class

7

Page 8-11R

Page 12-15

Page 18-21R

Page 16-17R

R

Exceptional power in a neat package – Kärcher® compact high-

pressure cleaners are quickly set up wherever you need them and

quickly stowed away again.

You need a mobile high-pressure cleaner for use at different

cleaning locations? You need a machine that offers high power but

is still easy to transport?

Take a look at the Kärcher® compact class.

Compact class

For occasional usersand for indoor areas.

You have to clean equipment, machines or surfaces every day?

You need a unit with a wide action radius and also have to clean

areas that are difficult to reach? You have a limited amount of

space in the yard or workshop?

You’ll find the right machine in the medium-duty class.

Medium-duty class

For daily cleaning of machines and surfaces.

Super class

For tough continuous-duty applications on construc-tion sites, in agriculture, municipalities and industry.

Special-purpose class

For applications that have to comply with special safety regulations, for extremely heavy soiling or special locations.

You need plenty of cleaning power for extended periods of time?

You have to deal with large quantities of stubborn dirt? The unit

will be used continuously?

You need one of the models in the Kärcher® super class.

Your high-pressure cleaner will be used in areas where high

standards of hygiene are specifi ed? You need an extremely

high operating pressure or have to work on scaffolding?

The special-purpose class has the right machine for you.

8

Commercial cold water high-pressure cleaners

HD 5/11 C/Plus

1/230/50

500

115/11.5

60

2.2

19

375 x 360 x 935

Extended trigger gun

10 m

400 mm

�

-/�

-

1.520-101/-103

1/230/50

500

120/12

60

2.2

23

375 x 360 x 935


10 m

550 mm

�

-/�

-

1.514-101/-151

HD 5/12 CX/Plus

1/230/50

500

120/12

60

2.2

28

375 x 360 x 935


15 m

550 mm

�

-/�

�

1.514-501/-551

HD 5/12 C/Plus

AUTO SHUTDOWN

Compact class – convenient, manoeuvrable, versatile

• Robust 3-piston axial pump• Sturdy pull-out push handle made of aluminium• Water inlet made of brass

HD 5/11 C• Entry-level model for mobile

applications• Extended trigger gun (450 mm)• Stainless steel spray lance (400 mm)

Kärcher®’s compact high-pressure cleaners feature a slim space-saving design, low weight and high cleaning efficien-cy which makes them true allrounders for fast and thorough cleaning jobs on the farm, in the workshop, for company fleets and machinery and for do-it-yourself enthusiasts. From the small, low-priced entry-level unit to the high-per-formance models with three-phase motor – price-conscious users in agriculture, crafts and trades and municipal ser-vices can find what they need at Kärcher®.

Adjustable push handle: Sturdy pull-out handle (aluminium),

on which the accessories can

be accommodated when it is

extended and which provides

good manoeuvrability. With the

handle pushed back in, the

machine can be transported in a

service vehicle or a station wagon.

Brass water inlet fitting: Another quality feature of the

new, robust 3-piston axial pump

is its water inlet fitting made of

brass.

Standard equipment for professionals:

All compact models have a number of outstanding features in

common: A rugged 3-piston axial pump for a long service life;

the patented anti-twist system (AVS) for easy and safe

operation and Kärcher®’s automatic pressure-controlled shut-

down for low energy consumption.

Technical data

Power supply Ph/V/Hz

Water flow rate l/h

Pressure bar/MPa

Max. water feed temp. °C

Connected load kW

Weight kg

Dimensions (L x W x H) mm

Trigger gun

High-pressure hose

Spray lance

Triple nozzle 0°/25°/40°

Dirt blaster

Unit-mounted hose reel

Order No.

Equipment

� Standard accessory

HD 5/12 C

9


HD 6/13 C HD 6/15 C

HD 6/13 C

1/230/50

230-560

30-130/3-13

60

2.7

24.5

375 x 360 x 935

Easy Press

10 m

850 mm

�

-

-

1.514-201

HD 6/13 C Plus

1/230/50

230-560

30-130/3-13

60

2.7

24.8

375 x 360 x 935

Easy Press

10 m

850 mm

�

�

-

1.514-251

HD 6/13 CX

1/230/50

230-560

30-130/3-13

60

2.7

29.2

375 x 360 x 935

Easy Press

15 m

850 mm

�

-

�

1.514-601

HD 6/13 CX Plus

1/230/50

230-560

30-130/3-13

60

2.7

29.5

375 x 360 x 935

Easy Press

15 m

850 mm

�

�

�

1.514-651

HD 6/15 C HD 6/15 C Plus

1/230/50

230-560

30-150/3-15

60

3.1

28.3

375 x 360 x 935

Easy Press

10 m

850 mm

�

�

-

1.150-603

HD 6/15 CX

1/230/50

230-560

30-150/3-15

60

3.1

30

375 x 360 x 935

Easy Press

15 m

850 mm

�

-

�

1.150-651

HD 6/15 CX Plus

1/230/50

230-560

30-150/3-15

60

3.1

30.3

375 x 360 x 935

Easy Press

15 m

850 mm

�

�

�

1.150-653

1/230/50

230-560

30-150/3-15

60

3.1

28

375 x 360 x 935

Easy Press

10 m

850 mm

�

-

-

1.150-601

You will find the extensive range of original Kärcher® accessories on pages 24-25, cleaning agents on page 23.

• Infinitely variable pressure and water flow control on the unit• Easy Press trigger gun with soft grip insert• Pivoting stainless steel spray lance (850 mm), can be turned

under pressure

• Easy Press trigger gun with soft grip inlay• Infinitely variable pressure and water flow control on the unit• Pivoting stainless steel spray lance (850 mm), can be turned

under pressure

Adjustable push handle Sturdy pull-out handle (alumi n ium)

on which the accessories can be

accommodated when it is extend-

ed. Provides good manoeuvrabil-

ity. With the handle pushed back

in, the machine can be transport-

ed in a service vehicle or a station

wagon. Not on CX version.

Infinitely variable adjustment of

pressure and water flow rate to

suit cleaning task in hand

(HD 6/13 C series only).

Pressure hose reel, supported at both sides: Keeps pressure hose tidy, its

length of 15 metres ensures a

wide working radius.

Practical assessory stowage on unit: Power cable and nozzles always

at hand, cannot be mislaid.

10

HD 6/12-4 C

1/230/50

300-600

20-120/2-12

60

2.8

29.5

375 x 360 x 935

Easy Press

10 m

850 mm

�

-

-

1.150-150

HD 6/12-4 C

1/230/50

300-600

20-120/2-12

60

2.8

31.5

375 x 360 x 935

Easy Press

15 m

850 mm

�

-

�

1.150-151

1/230/50

300-600

20-120/2-12

60

2.8

31.8

375 x 360 x 935

Easy Press

15 m

850 mm

�

�

�

1.150-153

HD 6/12-4 CX PlusHD 6/12-4 CX

1/230/50

300-600

20-120/2-12

60

2.8

29.8

375 x 360 x 935

Easy Press

10 m

850 mm

�

�

-

1.150-152

HD 6/12-4 C Plus


AUTO SHUTDOWN

Servo Control

Compact but exceptionally robust: Series HD 6/12-4 C and HD 7/18 C units not only offer impressive performance data and levels of equipment, but also an exceptionally long service life. Their longe vity and rugged build, with either a single-phase or three-phase motor, make them the number one choice for tough operat-ing conditions.

Easy PressErgonomic design and well

thought-out features ensure

fatigue-free operation for long

periods at a time. The new

Easy Press trigger gun reduces

holding and operating effort.

• Robust, 4-pole low-speed single-phase motor• Easy Press trigger gun with soft grip inlay • Robust 3-piston axial pump with ceramic pistons

QualityThe HD 6/12-4 C has a 4-pole,

longlife, air-cooled motor and a

robust 3-piston axial pump with

brass cylinder head.

Compact class – robust for extended life

Technical data

Compact design, very good mobility: Compact dimensions,

low weight and excellent mobility

make cleaning operations simpler

and faster. The units are highly

manoeuvrable and can be easily

transported in a service vehicle or

a station wagon.


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment


11

HD 7/18 C

3/400/50

240-700

20-175/2-17.5

60

5.0

29

375 x 360 x 935

Easy Press

10 m

850 mm

�

-

-

1.151-601

HD 7/18 C

3/400/50

240-700

20-175/2-17.5

60

5.0

29.3

375 x 360 x 935

Easy Press

10 m

850 mm

�

�

-

1.151-603

HD 7/18 C Plus


3/400/50

240-700

20-175/2-17.5

60

5.0

31

375 x 360 x 935

Easy Press

15 m

850 mm

�

-

�

1.151-651

3/400/50

240-700

20-175/2-17.5

60

5.0

31.3

375 x 360 x 935

Easy Press

15 m

850 mm

�

�

�

1.151-653

HD 7/18 CX PlusHD 7/18 CX

Servo Control


Servo Control Precision control of pressure

and water flow rate directly on

the trigger gun

(series HD 7/18 C only).

Adjustable push handle Sturdy pull-out handle (alumi n ium)

on which the accessories can be

accommodated when it is extend-

ed. Provides good manoeuvrabil-

ity. With the handle pushed back

in, the machine can be transport-

ed in a service vehicle or a station

wagon. Not on CX version.

• Longlife three phase motor• Easy Press trigger gun with soft grip inlay and Servo Control• Pivoting stainless steel spray lance (850 mm), can be turned under pressure

Pressure hose reel, supported at both sides: Keeps pressure

hose tidy, its length of 15 metres

ensures a wide working radius.

Practical assessory stowage on unit: Power cable and nozzles always

at hand, cannot be mislaid.

Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment

12


HD 6/16-4 M

Servo Control

1/230/50

230-600

30-160/3-16

60

3.4

43

467 x 407 x 1010

Easy Press

10 m

850 mm

�

-

-

1.524-100

HD 6/16-4 M HD 6/16-4 M Plus HD 6/16-4 MX

1/230/50

230-600

30-160/3-16

60

3.4

45

467 x 407 x 1010

Easy Press

15 m

850 mm

�

-

�

1.524-101

1/230/50

230-600

30-160/3-16

60

3.4

43.3

467 x 407 x 1010

Easy Press

10 m

850 mm

�

�

-

1.524-107

HD 6/16-4 MX Plus

1/230/50

230-600

30-160/3-16

60

3.4

45.3

467 x 407 x 1010

Easy Press

15 m

850 mm

�

�

�

1.524-108

AUTO SHUTDOWN

Medium class – powerful allrounders

• Robust, 4-pole low-speed three-phase motor• Easy Press trigger gun with soft grip inlay and Servo Control• Innovative detergent system


Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment

If you have to clean machinery, vehicles or yards every day, you need one of these allrounders: High water flow and pressure rates ensure thorough cleaning results even with stubborn dirt and long operating periods. Thanks to their upright build, these units take up surpris ingly little space. They can be used and stored in the upright position. The HD 7/18-4 M/895 series of models is equipped with a powerful three-phase motor for even higher performance.

Outstanding performance and service life

The 4-pole, air-cooled, low-

speed motor guarantees a long

service life. It makes the unit

compact and quiet in operation.

The extremely robust 3-piston

axial pump also guarantees an

extended wear life.

Tilting aid for easy mobility. Large capacity oil tank. The oil level is checked from

outside.

13


HD 7/18-4 M

3/400/50

240-700

10-180/1-18

60

5.0

43

467 x 407 x 1010

Easy Press

10 m

850 mm

�

-

-

1.524-200

HD 7/18-4 M

3/400/50

240-700

10-180/1-18

60

5.0

43.3

467 x 407 x 1010

Easy Press

10 m

850 mm

�

�

-

1.524-208

HD 7/18-4 M Plus

3/400/50

240-700

10-180/1-18

60

5.0

45

467 x 407 x 1010

Easy Press

15 m

850 mm

�

-

�

1.524-201

HD 7/18-4 MX

3/400/50

240-700

10-180/1-18

60

5.0

45.3

467 x 407 x 1010

Easy Press

15 m

850 mm

�

�

�

1.524-211

HD 7/18-4 MX Plus

Servo Control


The new Easy Press trigger gun

reduces holding and operat ing

effort. Water flow rate and pressure

can be adjusted with the

Servo Control on

the trigger gun.

Changeover without stopping work: Equipped with two 2.5-litre

bottles, it is possible to either

double cleaning capacity or

flexibly switch from one cleaning

agent to the other without having

to interrupt work.

• Robust, 4-pole low-speed three-phase motor• Easy Press trigger gun with soft grip inlay and Servo Control• Innovative detergent system

Precise metering:The 2-way metering valve selects

either of two bottles and allows

very accurate, infinitely variable

metering of detergent.

Pressure hose reel, supported at both sides: Keeps pressure hose tidy, its


wide working radius. Hose is

kept in place by a positive,

low-friction guide.

14


HD 9/19 M

3/400/50

450-890

40-185/4-18,5

60

6.8

43

467 x 407 x 1010

Easy Press

10 m

850 mm

�

-

-

1.524-300

HD 9/19 M HD 9/19 M Plus HD 9/19 MX

3/400/50

450-890

40-185/4-18,5

60

6.8

45

467 x 407 x 1010

Easy Press

15 m

850 mm

�

-

�

1.524-301

3/400/50

450-890

40-185/4-18,5

60

6.8

43.3

467 x 407 x 1010

Easy Press

10 m

850 mm

�

�

-

1.524-308

HD 9/19 MX Plus

3/400/50

450-890

40-185/4-18,5

60

6.8

45. 3

467 x 407 x 1010

Easy Press

15 m

850 mm

�

�

�

1.524-311

AUTO SHUTDOWN

Servo Control

Medium class – with outstanding features

• Easy Press trigger gun with soft grip inlay and Servo Control• Innovative detergent system• Pivoting stainless steel spray lance (850 mm), can be turned under pressure

Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment

Changeover without stopping work: Equipped with two 2.5-litre

bottles, it is possible to either

double cleaning capacity or

flexibly switch from one cleaning

agent to the other without having

to interrupt work.

Precise metering:The 2-way metering valve selects

either of two bottles and allows

very accurate, infinitely variable

metering of detergent.

Optimum performance and handling: Models HD 9/19 M and HD 9/20-4 M C offer the best per-formance in their class – and a level of equipment designed to comfortably cope with bigger cleaning operations. The HD 9/20 C is equipped with a 4-pole, low-speed three-phase motor for particularly long periods of operation – even in demanding conditions.

Tilting aid for easy mobility.


15


HD 9/20-4 M

3/400/50

460-900

40-200/4-20

60

7

46.9

467 x 407 x 1010

Easy Press

10 m

1050 mm

�

-

-

1.524-401

HD 9/20-4 M

3/400/50

460-900

40-200/4-20

60

7

47.2

467 x 407 x 1010

Easy Press

10 m

1050 mm

�

�

-

1.524-403

HD 9/20-4 M Plus

3/400/50

460-900

40-200/4-20

60

7

49.2

467 x 407 x 1010

Easy Press

20 m

1050 mm

�

�

�

1.524-404

HD 9/20-4 MX Plus

Servo Control



reduces holding and operat ing

effort. Water flow rate and pressure

can be adjusted with the

Servo Control on

the trigger gun.

• Robust, 4-pole low-speed three-phase motor• Robust 3-piston axial pump with ceramic pistons• Easy Press trigger gun with soft grip inlay and Servo Control

Outstanding performance and service life

The 4-pole, air-cooled, low-

speed motor guarantees a long

service life. It makes the unit

compact and quiet in operation.

The extremely robust 3-piston

axial pump also guarantees an

extended wear life.

Large capacity oil tank. The oil level is checked from

outside.

Pressure hose reel, supported at both sides:Keeps pressure hose tidy, its


wide working radius. Hose is

kept in place by a positive,

low-friction guide.

16


AUTO SHUTDOWN

Servo Control

3/400/50

1000

210/21

60

7.8

62

560 x 500 x 1090

Easy Press

10 m

1050 mm

Power nozzle

-

6 l

-

1.286-320/323

HD 10/21-4 S/S Plus HD 10/23-4 S/S PlusHD 10/21-4 SX Plus

3/400/50

1000

210/21

60

7.8

64

560 x 500 x 1090

Easy Press

20 m

1050 mm

Power nozzle

�

6 l

�

1.286-324

HD 10/21-4 S

3/400/50

1000

230/23

60

7.8

64

560 x 500 x 1090

Easy Press

20 m

1050 mm

Power nozzle

�

6 l

�

1.286-328/-329

new

HD 10/23-4 S

Kärcher®’s super class models are the right choice for all those who have to reliably remove large amounts of dirt every day under tough operating conditions. Our super high-pressure cleaners are among the front runners in respect of pressure, water flow rate and equipment – built for demand-ing continuous-duty applications in the construction indus-try, agriculture and forestry, in municipal services and indus-try in general.

Mobility: The upright construction of the

high-pressure cleaners guaran-

tees excellent manoeuvrability

(cart design) and requires very

little space. The large-diameter wheels allow easy handling of the

units on uneven floors or up and

down steps.

Super class – for tough continuous-duty applications

The latest in the super class: HD 10/21-4 S, HD 10/25-4 S and HD 13/18-4 S

Kärcher® sets the standards for commercial high-pressure cleaners

with its new HD 10/21-4 S, HD 10/25-4 S and HD 13/18-4 S:

Cleaning performance, service life, mobility and user friendliness are

among the best available in this class – and it all comes as standard.


Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster

Integral detergent tank


Order No.

Equipment

Quality: 4-pole, longlife, water-cooled

motor, robust 3-piston axial

pump with brass cylinder head

and ceramic pistons and brass

water inlet fitting guarantee

quality.

• 4-pole three-phase motor with water cooling• Easy Press trigger gun with soft grip inlay• Equipped with Kärcher® Power nozzle

17

HD 13/18-4 S

3/400/50

650-1300

30-180/3-18

60

9.2

62

560 x 500 x 1090

Easy Press

10 m, Longlife

1050 mm

� touchless

�

6 l

-

1.292-101

HD 13/18-4 S Plus HD 13/18-4 SX Plus

3/400/50

650-1300

30-180/3-18

60

9.2

64

560 x 500 x 1090

Easy Press

20 m, Longlife

1050 mm

� touchless

�

6 l

�

1.292-501


HD 10/25-4 S

3/400/50

500-1000

30-250/3-25

60

9.2

62

560 x 500 x 1090

Easy Press

10 m

1050 mm

� touchless

-/�

6 l

-

1.286-101/201

HD 10/25-4 S/Plus HD 10/25-4 SX Plus

3/400/50

500-1000

30-250/3-25

60

9.2

64

560 x 500 x 1090

Easy Press

20 m

1050 mm

� touchless

�

6 l

�

1.286-501


Servo Control

The motor/pump unit is pro-tected electronically which

provides increased reliability and

allows the unit to be operated

for long periods at a time: In the

case of problems, e.g. leakage,

over and undervoltage or phase

failure, the machine shuts down

automatically. The fine mesh water filter protects the pump

from impurities in the feed water.

The new Easy Press trigger gun can be held and operated

with greatly reduced effort.

Water flow rate and pressure

can be infinitely varied by rotat-

ing the Servo Control on the

trigger gun.

• Maximum dirt dissolving power and flushing action• Easy Press trigger gun with soft grip inlay and Servo Control• Longlife high-pressure hose

Very important in the building

trade: Crane attachment point

(optional).

SX special features: The hose reel is supported in

bearings at both sides. The hose

emerges at the bottom front of

the machine so the hose can be

easily unwound and rewound.

• Maximum impact pressure for stubborn dirt• Easy Press trigger gun with soft grip inlay and Servo Control• Triple nozzle with touchless changeover

18

HD 600/HD 715 HD 16/15-4 Cage

3/400/50

240-700

10-160/1-16

60

4.7

29

500 x 310 x 350

Easy Press

15 m

850 mm

�

-

-

1.151-501

1/230/50

240-650

10-105/1-10,5

60

3.3

29

500 x 310 x 350

Easy Press

10 m

540 mm

�

-

-

1.284-105

HD 600


AUTO SHUTDOWN

Servo Control

HD 715 HD 16/15-4 Cage Plus

3/400/50

500-1600

10-150/1-15

60

9.5

75

710 x 685 x 795

Easy Press

15 m

1050 mm

� touchless

�

-

1.367-101

These units are particularly talented in one respect: They effectively remove stubborn dirt in difficult oper ating condi-tions. This applies to the HD 600/715 which is ideal for use on scaffolding, and to the HD 16/15-4 and HD 22/15-4 with their very high water flow rates. Their four-wheel design with tubular frame makes them fully manoeuvrable, even on rough terrain, and suitable for mechanical handling by crane.

Portable alternatives: HD 600 and HD 715. Designed

for working at heights: HD 600

and HD 715 are portable high-

pressure cleaners with a robust

tubular frame in which a crane

attachment point is integrated.

• Easy Press trigger gun with soft grip inlay and Servo Control

• Enclosed tubular frame with attachment point for handling by crane

• 3-piston axial pump with ceramic pistons

• Portable unit for facade cleaners and painters, sturdy tubular steel frame with handle• Pivoting stainless steel spray lance (540 mm),

can be turned under pressure• Infinitely variable pressure and water flow

control on the unit

The special-purpose class for particular applications

HD 16/15-4 Plus – compact powerhouse:The unit has a maximum water

flow rate of 1600 litres, a Dirt

Blaster as standard equipment

and weighs only 75 kg, which

makes it ideal for mobile appli-

cations.

Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment


19

HD 22/15-4 Cage/HD 17/20-4 Cage

3/400/50

800-2200

30-150/3-15

60

12

112

880 x 725 x 825

Easy Press

15 m, Longlife

1050 mm

Power nozzle

�

-

1.367-120

HD 22/15-4 Cage Plus

HD 2000 Super

3/400/50

500-1800

10-200/1-20

60

13.4

130

1020 x 760 x 1000

Easy Press

15 m

1050 mm

Power nozzle

-

-

1.068-111

HD 2000 Super


3/400/50

800-1700

30-200

60

12

112

880 x 725 x 825

Easy Press

15 m, Longlife

1050 mm

Power nozzle

�

-

1.367-130

HD 17/20-4 Cage Plus


HD 2000 Super – double cleaning power: Rated for

operation with two lances

(option), two powerful motor-

pump units with delayed start-

up guarantee maximum power

output. The extra large integral

detergent tank (10 litres) permits

long periods of uninterrupt ed

operation.

The newly developed, longlife

crankshaft pump features

chromium plated stainless steel

pistons and a brass cylinder head.

A cushioned start slowly increas-

es motor speed to 1400 rpm to

protect the mains supply from

overload after switch-on.

• Mobile specialist for cleaning tasks that require a high water flow rate

• Easy Press trigger gun with soft grip inlay and Servo Control• Automatic cushioned start, tubular stainless steel frame

• Two powerful pump units• Easy Press trigger gun with soft grip inlay and

Servo Control• Rated for two-lance operation (option)

Sturdy all-round tubular stain-less steel frame with crane

attachment point protects

machine components from

impact and damage.

Cage version features a sturdy tubular steel frame. Components

are well-protected against rough handling in plant hire business,

construction industry as well as in agriculture and forest industry.

HD 11/35 EC B Cage HD 2/150

3/400/50

1140

350/35

60

15

218

1200 x 890 x 905

Easy Press

15 m Longlife

1050 mm

Power nozzle

-

-

1.367-201

HD 11/35 EC-B Cage


AUTO SHUTDOWN

Servo Control

3/400/50

120

1500/150

30

8.4

85

710 x 676 x 817

Electronic rotary nozzle gun

10 m

750 mm

Sapphire nozzle

-

-

1.331-104

HD 2/150 HD 11/35 EC-B Cage

20

The Kärcher® special-purpose class includes effective extreme-pressure units as well as units that meet strict standards of hygiene.

Pressure pump unit with additional fine mesh water filter and float tank:Water feed pressure remains

constant.

• Maximum pressure with low water consumption• Extreme-pressure pump with stainless steel

cylinder head and special hard alloy pistons• Electronic monitoring of operating pressure,

water inlet pressure and current drawn

• Crankshaft pump with belt drive

• Easy Press trigger gun with soft grip inlay

• Heavy-duty equipment for rough conditions

The special-purpose class for particular applications

Crankshaft pump with belt

drive rated for heavy-duty

applications.

Technical data


Water flow rate l/h

Pressure bar/MPa


Connected load kW

Weight kg


Trigger gun

High-pressure hose

Spray lance


Dirt blaster


Order No.

Equipment


Easy access to all components

– enclosed tubular frame with integral attachment point for crane.

Low water consumption(120 l/h) while providing maxi-

mum cleaning power – the

HD 2/150 can do it thanks to

its constant operating pres-

sure of 1500 bar. The unit is

equipped with the necessary

electronic monitoring systems

and extremely hard-wearing

components.

Extreme pressure extension hose (20 m)

Order No. 6.390-660

Hose coupling

Order No. 6.390-661

Special accessories

350 bar/35 MPa

Extreme-pressure cleaner

1500 bar/150 MPa


HD 7/10 CXF

3/400/50

250-700

30-100/3-10

80

4.5

31.3

375 x 360 x 935

Easy Press

15 m

850 mm

�

-

�

1.151-611

HD 7/10 CXF

HD 1000 Si

3/400/50

150-840

10-130/1-13

85

5.6

66

1005 x 500 x 820

Easy Press

10 m

1050 mm

� touchless

-

-

1.924-111

HD 1000 Si

Servo Control

HD 5/17 C

HD 5/17 C

1/230/50

250-700

30-100/3-10

80

4.5

31.3

375 x 360 x 935


10 m

850 mm

�

-

-

1.151-61

21You will find the extensive range of original Kärcher® accessories on pages 24-25, cleaning agents on page 23.

new new

HD 1000 Si: All components,

including the special stainless-steel chassis, the nickel-plated cylinder head and ceramic

pistons comply with the highest

standards of hygiene for use in the

food industry and sanitary areas.

The extra large detergent tank

ensures constant availability of

detergent.

HD 650 SXL: Special hygiene

standards apply in sanitary and

municipal areas. The HD 650 SXL

high-pressure cleaners have

hoses in food-industry quality

and a short spray lance as stand-

ard, and fully comply with the

requirements that may apply in

specific cases.

• For sanitary and municpal areas• Integral detergent tank (7 litres)• High-pressure hose in food-industry

quality, grey non-marking wheels

• Complies with statutory hygiene standards• Easy Press trigger gun with soft grip inlay

and Servo Control• High-pressure hose in food-industry

quality, grey non-marking wheels


can be held and operated with

greatly reduced effort. Water flow

rate and pressure can be infinitely

varied by rotating the

Servo Control on the

trigger gun.

• Highest operating pressure in its class• Infinitely variable pressure and water

flow control on the unit• Integral detergent tank (7 litres)

HD 658: Pressure-optimised

single-phase unit. Particularly

suitable for cleaning spots of

stubborn dirt.

22

Sandstone, granite or hard-

wood: Kärcher® has the right

abrasive to suit every type

of facade material – in grain

sizes from 0.04 to 1.4 mm.

Kärcher® Dirt Blaster Disinfecting

The ideal combination for

high intensity cleaning: It

blends the large area cover-

age of a fan jet with the high

dirt dissolving power of a

solid pencil jet.

Highly effective active clean-

ers and DGHM-listed dis-

infectants guarantee micro-

bacterial cleanliness in areas

where highest standards

of hygiene are required,

i.e. in food production and

washrooms, WCs, etc.

Facade cleaning

Kärcher® cleaning and care

agents help you optimize

your cleaning results and

reduce the required tempera-

ture, pressure and time.

Optimized cleaning

performance

Innovation made by Kärcher® – the new Inno/Easy Foam system for economical cleaning and disinfection.

With original Kärcher® accessories and cleaning agents you extend the range of applications of

your high-pressure cleaners – from vehicle washing to wet-blasting and hard surface cleaning.

Kärcher® cleaning agents are not only exceptionally thorough, but also very environment friendly.

They are developed in our laboratories.

Accessories for every application

Nozzle technology

More cleaning power as a

result of Kärcher®’s opti-

mised nozzle technology:

Innovative developments,

such as the Kärcher® Dirt

Blaster and triple nozzle

with touchless changeover,

further increase the cleaning

performance of a Kärcher®

high-pressure cleaner.

Washing vehicles


cleaners are the perfect

mobile car washes: Equipped

with our push-on washing

brushes, they can also clean

sensitive surfaces without any

problem. Fine dust and traffic

grime are removed fast and

economically.

High-pressure hose and

coupling system 2000

Hoses are easily changed

with the new coupling sys-

tem – thanks to ergonomic

screw unions and connec-

tions that prevent seizing and

scale build-up. Furthermore,

the hose rotates 360° with-

out becoming twisted.

Floor and

wall cleaning

Kärcher® has developed

accessories for cleaning

indoor and outdoor floors

and walls that ensure out-

standing efficiency and eco-

nomy – while providing up to

ten times the area coverage.

Easy Foam Set

• The standard solution for

foam generation

• Foam nozzle with union for

all Kärcher® HD/HDS units

Inno Foam Set

• Double spray lance with

foam nozzle and change-

over to high pressure

• Generates long-lasting

cleaning and disinfecting

foam

23

10 l 6.294-392

30 kg 6.394-393

10 l 6.294-394

20 l 6.294-395

30 kg 6.294-397

200 kg 6.294-396

20 l 6.291-582

20 l 6.291-592

10 l 6.291-382

10 l 6.291-384

20 l 6.294-855

220 kg 6.291-220

10 l 6.294-394

20 l 6.294-395

30 kg 6.294-397

200 kg 6.294-396

10 l 6.294-468

20 l 6.294-469

10 l 6.294-405

30 kg 6.294-406

200 kg 6.294-407

10 l 6.294-411

20 l 6.294-412

30 kg 6.294-402

200 kg 6.294-413

25 l 6.294-468

200 l 6.294-469

500 ml 6.293-900

10 l 6.291-442

10 l 6.294-468

20 l 6.294-469

220 kg 6.291-220

10 l 6.294-411

20 l 6.294-412

30 kg 6.294-402

200 kg 6.294-413

25 l 6.294-468

200 l 6.294-469

10 l 6.294-405

30 kg 6.294-406

200 kg 6.294-407

10 l 6.291-370

50 kg 6.280-101

50 kg 6280-102

25 kg 6.290-716

25 kg 6.290-585

Size of pack Order No.

Building and facade maintenance

Universal cleaner (RM 55) Liquid concentrate for gentle-action cleaning and maintenance of surfaces. Removes oil and

grease stains and pollution caused by emissions. Fast oil/water separation with good dirt-transporting property.

Intensive deep cleaner (RM 750) High yield cleaner, removes stubborn soiling such as grease, oil and soot as well as

gloss, wax and polymer coatings. Contains no solvents or phosphates. Pleasant smell.

Abrasive, coarse Granulated furnace slag with grain size of 0.25 -1.4 mm. For removing coarse deposits from and

scrubbing steel, granite, porphyry, aerated concrete and pebble-dashed concrete. Also ideal for removing rust and paint.

Abrasive, fine Granulated furnace slag with grain size of 0.2 - 0.8 mm. For brick, sandstone, terrazzo, steel, bronze,

hardwood or concrete. Also ideal for removing rust and paint.

Facade Jet Pearls Calcium carbonate based abrasive. Very fine grain size: 0.04 - 0.14 mm. For use on more sensitive surfaces such

as sandstone, terrazzo, hardwood or polished surfaces as well as for removing paint from facades, e.g. grafitti.

Facade Jet Standard Calcium carbonate based abrasive. Grain size 0.2 - 0.8 mm. For use on sandstone, terrazzo,

hardwood and nonferrous metals. Also for gentle-action removal of rust and paint.

Cleaning agents

Active cleaner, acid (concentrate) (RM 25) Deep-acting high-pressure cleaning agent for sanitary areas. This

concentrate effectively removes deposits and coatings of lime, rust, beer stone, milk stone, grease and albuminous stains.

Active cleaner, alkaline (concentrate) (RM 31) High-pressure basic cleaning agent with excellent wetting

properties. Cleans highly effectively at all temperatures. Removes oil/grease, tar, soot and smoke resin. Contains no solvents or

phosphates.

Foam cleaner, alkaline (RM 58) Reliably removes grease, oil and albuminous stains as well as food residue from tiles

and tanks. Long contact period, even on vertical surfaces.

Foam cleaner, acid (RM 59) Removes deposits and coatings of limescale, rust, grease, albumin, beer stone, milk stone

from tiles and tanks. Long contact period, even on vertical surfaces. Also ideal for swimming pools.

Disinfecting cleaner (RM 732) With bactericidal, fungicidal and limited virocidal properties (e.g. hepatitis B). Can be used

manually or with floor maintenance machines. DGHM* and DVG** listed. *German Society for Hygiene and Microbiology ** German Society for Veterinary Medicine

Disinfecting cleaner (RM 735) Neutral disinfectant with good surface-protecting properties. With bactericidal, fungicidal

and limited virocidal properties (e.g. hepatitis B). Can also be used manually. DGHM* and DVG** listed.

*German Society for Hygiene and Microbiology ** German Society for Veterinary Medicine

Desinfection cleaner, foam, alkaline (RM 734) Foam disinfecting cleaner. With fungicidal, virocidal,

sporicidal and bactericidal properties. Removes grease, albumin, oil and soot stains. Can also be used on vertical surfaces.

Machine maintenance

Shampoo powder, alkaline (RM 22) Gentle action. Removes oil, grease, soot and emission residue. Very good

degreasing action. Can be used at all temperatures. Excellent for vehicle and engine washing.

Active cleaner, alkaline (concentrate) (RM 31) High-pressure basic cleaning agent with excellent wetting

properties. Cleans highly effectively at all temperatures. Removes oil/grease, tar, soot and smoke resin. Contains no solvents or

phosphates.

Hot wax, liquid (RM 41) Natural carnauba wax-based high sheen, laboratory tested long-term preservative. Offers

complete protection against weather with long-lasting shine, contains inhibitors that delay re-soiling. Can be used cold and is not

detrimentally affected by water quality. Also suitable for preserving parts.

Universal cleaner (RM 55) Liquid concentrate for gentle-action cleaning and maintenance of surfaces. Removes oil and

grease stains and pollution caused by emissions. Fast oil/water separation with good dirt-transporting property.

Active wash, alkaline, liquid (RM 81) For heavy oil, grease and mineral stains. Very good for vehicle and engine

washing. Contains no phosphates or hydrocarbons, pleasant smell. RM 81 is used primarily with hot water units.

Spray wax (RM 821) Liquid wax. Provides whole vehicle with long-term protection, water runs off in beads. Not affected by

the water quality, dries without leaving spots. Contains no mineral oils or mineral hydrocarbons.

Food industry and sanitary areas

Vehicle cleaning and care

Wheel cleaner (RM 44) This gentle action cleaning gel removes brake dust, rubber residue from tyres, winter salt deposits.

Highly efficient with long-term effect.

Hot wax, liquid (RM 41) Natural carnauba wax-based high sheen, laboratory tested long-term preservative.

Offers complete protection against weather with long-lasting shine, contains inhibitors that delay re-soiling. Can be used cold

and is not detrimentally affected by water quality. Also suitable for preserving parts.

Shampoo powder, alkaline (RM 22) Gentle action. Removes oil, grease, soot and emission residue. Very good.

degreasing action. Can be used at all temperatures. Excellent for vehicle and engine washing.

Active wash, alkaline, liquid (RM 81) Gentle action. Removes oil, grease, soot and emission residue. Very good

washing. Contains no phosphates or hydrocarbons, pleasant smell. RM 81 is used primarily with hot water units.

Spray wax (RM 821) Liquid wax. Provides whole vehicle with long-term protection, water runs off in beads. Not affected by

the water quality, dries without leaving spots. Contains no mineral oils or mineral hydrocarbons.

3/4" 2.637-691

1" 2.638-255 3/4"+1" 4.730-102 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1" 2.638-270 � � � � � � � � � � ● � �

R 1"+3/4" 6.412-578 � � � � � � � � � � � � � � � � � � � � � � � � � �

10 m 6.389-891 ▲ ▲ ▲ ▲1) ▲1) ▲1) ▲ ▲ ▲ ▲1) ▲1) ▲1) ▲ ▲ ▲ ▲ ▲ ▲ ▲

15 m 6.390-010 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

20 m 6.390-031 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

15 m 6.390-023 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● � ●

10 m 6.390-026 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

20 m 6.390-027 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

10 m 6.388-083 ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

4.401-076 � � � �1) �1) �1) � � � �1) �1) �1) � � � � � � � � � �

4.403-002 � � � �1) �1) �1) � � � �1) �1) �1) � � � � � � � � � � � �

600 mm 4.760-364 � � � � � � ● � � � � � � � � � � � � � � 850 mm 4.760-386 ● ● ● ● ● ● ● � ● ● ● ● � � � � � � � 1050 mm 4.760-550 � � � � � � � � � � � � ● ● ● ● ● ● ● ● ● ● ● ●

1550 mm 4.760-365 � � � � � � � � � � � � � � � � � � � � � � � � 2050 mm 4.760-366 � � � � � � � � � � � � � � � � � � � � � � � �

ø 300 mm 2.641-065 � � � � � � � � � � � � � � �

ø 300 mm 2.640-355 � � � � � � � � � � � � � � � � � � � � � � � �

24

HD

10

/25

-4

SX

Plu

s

HD

13

/18

-4

SX

Plu

s

HD

10

/25

-4

S/S

Plu

s

HD

10

/21

-4

SX

Plu

s

HD

7/1

8-4

M/M

X/P

lus

HD

6/1

6-4

M/M

X/P

lus

HD

71

5

HD

5/1

7 C

HD

7/1

0 C

XF

HD

60

0

HD

10

/21

-4

S/S

Plu

s

HD

9/2

0-4

M/M

X P

lus

HD

9/1

9 M

/MX

/Plu

s

HD

13

/18

-4

S P

lus

HD

20

00

Su

pe

r

HD

6/1

5 C

/C P

lus

HD

6/1

3 C

X/C

X P

lus

HD

6/1

3 C

/C P

lus

HD

5/1

2 C

/C P

lus

HD

5/1

1 C

/C P

lus

HD

5/1

2 C

X/C

X P

lus

HD

7/1

8 C

/CX

/Plu

s

HD

6/1

2-4

C/C

X/P

lus

HD

16

/15

-4

Plu

s

HD

10

00

Si

HD

17

/20

-4

Ca

ge

Plu

s

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

HD

22

/15

-4

Ca

ge

Plu

s

HD

10

/23

-4

S/S

X/P

lus

HD

11

/35

HD

6/1

5 C

X/P

lus

Part name Length Order No.

Capacity

Connection

Water connection Mounts to machine inlet, 140 μm

Mounts to machine, suitable for suction mode, 150 μm

Mounts to machine inlet, 80 μm

Mounts to machine inlet, 150 μm

Backflow check valve

Prevents detergent entering water main in case of

depression in the system.

High-pressure hoses

With M 22 x 1.5 union at both ends.

with anti-kink protection

ID 8/155°C/315 bar

ID 8/155°C/315 bar

ID 8/155°C/315 bar

ID 10/155°C/220 bar

Longlife 400 (ID 8/155°C/400 bar)

without rotary coupling, 2 x M 22 x 1.5

with rotary coupling, 2 x M 22 x 1.5

with rotary coupling, 2 x M 22 x 1.5

Rotary coupling

Reliably prevents HP hose twisting.

M 22 x 1.5 connection

with protector

Coupling

For connecting and extending HP hoses,

2 x M 22 x 1.5 connection,

brass with rubber protector

Pivoting spray lancesSpray lances in various lengths,

stainless steel with hand screw union.

Ergonomically shaped handle mouldings

for optimum control and insulation.

Can be turned 360° under pressure.

FR 30 hard surface cleaner (nozzle kits 23-29, order

separately). A rotating nozzle beam with Kärcher®

Power nozzles, ceramic bearings, plastic housing for

good manoeuvrability. Max. 180 bar/850 l/h; 18 MPa

FR 30 ME hard surface cleaner (nozzle kits 23-29,

order separately). A rotating nozzle beam with Kärcher®

Power nozzles has an area coverage up to ten times

greater than conventional methods. Stainless steel

version. Ceramic bearings. Integral vacuum connector.

Kärcher® has been refining the technology of its cleaning equipment for decades, for the benefit

of its customers. This know-how not only makes Kärcher® products more reliable and economical

than others but also guarantees optimum compatibility of accessories with a broad range of high-

pressure cleaners.

Accessories for high-pressure cleaners

ø 500 mm 2.640-679 � � � � � � � � � � � � � � � � �

>450-500 l 2.640-482 � � � � >500-650 l 2.640-401 � � � � � � � � � >650-850 l 2.639-187 � � � � >850-1100 l 2.640-442 � � � � � � >1100-1300 l 2.639-188 � � >1300-1800 l 2.640-781 � � � >1800-2200 l 2.640-282 �

4.762-324 � � � � � � � � � � � � � � � � Bristles: Nylon 4.762-283 � � � � � � � � � � � Nylon 4.762-284 � � � � � � � � � � � � � � � Natural 4.762-287 � � � � � � � � � � � Natural 4.762-288 � � � � � � � � � � � � � � � 35 4.763-931 � � � � � � � - 40 4.763-252 � � � � � � � 45 4.763-988 � � 50 4.763-253 � � � 055/060 4.763-250 � � � � � 070/080 4.763-254 � � 090 4.767-076 ●

110 4.763-930 � ●

145 4.767-172 ● ● 30 4.767-041 � 35 4.767-022 � � � � � 40 4.767-023 � � � � � � 45 4.767-100 �

50 4.767-024 �

20 m 6.390-028 � � � � � � � � � � � � � � 30 m 6.390-029 � � � � � � � � � � � � � � 20 m 6.390-030 � � � � � �

55 5.763-015 65 65 65 65 60 65 65 75 100 65 130 140 150

65 5.763-019 90 100 120

60 5.763-016 85 110 120

65 5.763-020

50 5.763-017 75 75 75 75 70 75 75 60 85 115 75 140 170 180

70 5.763-021

50 6.415-428 � � � � � � � � � � � � � � 65 6.415-440 � 080 5.763-011 085 5.763-012 � � � � � � � 120 5.763-013 � � � � � � �

2.640-151 � �2) �2) � � � �2) �2) �2) �2) � � � � 2.640-692 � � �

2.640-691 � � �2) � � � �2) �2) �2) �2) � � � 2.640-693 � � �

500-600 l/h 2.640-870 � � � � 600-700 l/h 2.640-687 � � � � 700-1000 l/h 2.640-688 � � � � 1000-1300 l/h 2.640-689 � 2.640-902 � 1000 l/h 2.640-694 � � 1300 l/h 2.640-695 �

25

HD

10

/25

-4

SX

Plu

s

HD

13

/18

-4

SX

Plu

s

HD

10

/25

-4

S/S

Plu

s

HD

10

/21

-4

SX

Plu

s

HD

7/1

8-4

M/M

X/P

lus

HD

6/1

6-4

M/M

X/P

lus

HD

71

5

HD

5/1

7 C

HD

7/1

0 C

XF

HD

60

0

HD

10

/21

-4

S/S

Plu

s

HD

9/2

0-4

M/M

X P

lus

HD

9/1

9 M

/MX

/Plu

s

HD

13

/18

-4

S P

lus

HD

20

00

Su

pe

r

HD

6/1

5 C

/C P

lus

HD

6/1

3 C

X/C

X P

lus

HD

6/1

3 C

/C P

lus

HD

5/1

2 C

/C P

lus

HD

5/1

1 C

/C P

lus

HD

5/1

2 C

X/C

X P

lus

HD

7/1

8 C

/CX

/Plu

s

HD

6/1

2-4

C/C

X/P

lus

HD

16

/15

-4

Plu

s

HD

10

00

Si

HD

17

/20

-4

Ca

ge

Plu

s

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

HD

22

/15

-4

Ca

ge

Plu

s

HD

10

/23

-4

S/S

X/

Plu

s

HD

11

/35

HD

6/1

5 C

X/C

X P

lus

050/350 bar/ 4.764-176

Part name Length Order No.

Capacity

Connection

● Standard accessory � Option ▲ Extension hose 1) not for CX/MX versions 2) not for hose reel versions

FR 50 hard surface cleaner (nozzle kits 23-29,

order separately). A rotating nozzle beam with

Kärcher® Power nozzles has an area coverage up

to ten times greater than conventional methods.

Detergent intake facility. Stainless steel version.

Ceramic bearings. Integral detergent valve.

Machine-specific nozzle kit

Kärcher® Power nozzle for items 20-22

Push-on washing brush General-purpose cleaning on all surfaces:

With clamp for mounting directly

to unit’s double or triple nozzles

Rotary washing brush

Driven by water jet. Gently removes fine dust and

traffic film from all surfaces. Temperature resistant

up to 85°C, M 18 x 1.5

(replaceable brush element).

Dirt Blaster – not adjustable

Dirt Blaster – rotating pencil jet –

10-times the cleaning power.

Ceramic nozzle and bearing

for long service life

max. 300 bar/30 MPa, 85°C

Dirt Blaster – rotating pencil jet –

10-times the cleaning power.

Ceramic nozzle and bearing for long service life.

max. 180 bar/18 MPa, 60°C

Pipe cleaning hose, ID 6

Very flexible high-pressure hose for pipe cleaning

(1/8” connection for nozzle).

Pipe cleaning nozzle. With female thread, different

spraying directions for environment-friendly cleaning

of blocked drains and pipes. Nozzle orifices are

positioned so that the nozzle pulls itself and the

hose into the pipe.

3 x 30° backwards,

Ø 16 mm

1 x forwards, 3 x 30° backwards,

Ø 16 mm

3 x 30° backwards,

Ø 30 mm

4 rotating jets

Brass, for M 22 x 1.5 connection

directly to the high-pressure hose.

Inno Foam Set

Complete ready-to-use high-pressure foam system

for use with mobile and stationary HD/HDS units for

cleaning and disinfection. Twin spray lance with foam

nozzle and changeover to high-pressure jet for clear

rinsing, etc. High-pressure detergent injector with

precision 0-5 % metering valve.

Easy Foam Set

Complete ready-to-use high-pressure foam system

for use with mobile and stationary HD/HDS units for

cleaning and disinfection. Foam nozzle for connection

to HP spray lance. High-pressure detergent injector

with precision 0-5 % metering valve.

Nozzle kits for Inno/Easy Foam Set (order separately). Ideally match performance to

different machine outputs for economic operation

26

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1) • • • 7)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • 6) 6) 6) 6) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • 3) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5) • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

1~ 1~ 1~ 1~ 1~ 1~ 1~ 1~ 1~ 3~ 3~ 1~ 1~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 1~ 3~ 3~ 3~ 3~ 3~ 3~ 3~ 1~ 3~ 3~

2 2 2 2 2 2 2 4 4 2 2 4 4 4 4 2 2 4 4 4 4 4 4 4 4 4 4 2 2 4 4 4 4 4 4 2 2 4

6 6 • • 6 6 6 6 10 20

10 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 20 10 20 10 20 10 20 10 15 15 15 15 15 15 10 10 15 10

HD

5/1

1 C

/Plu

s

HD

5/1

2 C

/Plu

s

HD

5/1

2 C

X/P

lus

HD

6/1

3 C

/Plu

s

HD

6/1

3 C

X/P

lus

HD

6/1

5 C

/Plu

s

HD

6/1

5 C

X/P

lus

HD

6/1

2-4

C/P

lus

HD

6/1

2-4

CX

/Plu

s

HD

7/1

8 C

/Plu

s

HD

7/1

8 C

X/P

lus

HD

6/1

6-4

M/P

lus

HD

6/1

6-4

MX

/Plu

s

HD

7/1

8-4

M/P

lus

HD

7/1

8-4

MX

/Plu

s

HD

9/1

9 M

/Plu

s

HD

9/1

9 M

X/P

lus

HD

9/2

0-4

M/P

lus

HD

9/2

0-4

MX

/Plu

s

HD

10

/21

-4 S

/Plu

s

HD

10

/21

-4 S

X P

lus

HD

10

/23

-4

S/

Plu

s

NE

W

HD

10

/23

-4

SX

Plu

s

NE

W

HD

10

/25

-4 S

/Plu

s

HD

10

/25

-4 S

X P

lus

HD

13

/18

-4 S

/Plu

s

HD

13

/18

-4 S

X P

lus

HD

60

0

HD

71

5

HD

16

/15

-4 C

ag

e P

lus

HD

22

/15

-4 C

ag

e P

lus

HD

17

/20

-4 C

ag

e P

lus

HD

20

00

Su

pe

r

HD

11

/35

EC

-B C

ag

e

HD

2/1

50

HD

5/1

7 C

N

EW

HD

7/1

0 C

XF

N

EW

HD

10

00

Si

Chassis

Power supply

Motor (No. of poles)

Fully enclosed corrosion-free machine cover

Tubular frame

Integral detergent tank (l)

Infinitely variable detergent feed

Switch-CHEM-System

Adjustable push handle

Motor cooling

Water

Air

Combination of air and water

Electr. motor monitoring with LED indicator

Three-piston axial pump

with stainless steel pistons

with ceramic pistons

Cylinder head made of stainless steel

Cylinder head made of brass

Water inlet made of brass

Infinitely variable pressure and water flow

control on machine

Servo/Easypress control

Kärcher pressure-controlled shutdown

High-pressure trigger gun

extended trigger gun

Easypress with soft grip insert

Pivoting spray lance

Nozzle

Power nozzle

Triple nozzle

Flick-to-change triple nozzle

High-pressure hose System 2000

with anti-twist system (AVS)

Hose length (m)

Detergent feed

in low-pressure mode

in high-pressure mode

Plus = comes standard with

Dirt Blaster

Machine features in detail

Crankshaft pump with stainless-steel pistons

HP hose reel

1) Special hard alloy 2) Nickel plated 3) Extreme pressure trigger gun 4) Sapphire nozzle 5) Extreme pressure hose 6) Servo Control (option) 7) With ceramic pistons

Equipment

Mo

del


Super class Medium-duty class

Compact class

27

High quality

standards

Performance and functional

tests are performed on every

machine at the end of the

assembly line. Finished prod-

ucts are taken off the line at

regular intervals and subject-

ed to an extended durability

test which simulates their

normal applications and load

cycles in practice.

User benefits Always nearby

Every Kärcher® high-pres-

sure cleaner offers the

maximum cleaning power,

operator convenience and

service life in its respective

price and performance class.

Kärcher® machines maintain

their value.

There are currently more

than 36,000 Kärcher® sales

outlets worldwide that offer

customers expert advice,

original Kärcher® spare

parts, fluids, lubricants and

accessories as well as a pro-

fessional servicing facilities.

Environment

Our central production and distri-

bution location in Winnenden has

received certification in accord-

ance with the strict DIN EN ISO

14001 standard. This means that

all processes in research and

development, production and dis-

tribution comply with the highest

environment standards of environ-

mental management.

Cleaning expertise

The responsibility we feel vis-à-vis a clean and intact envi-

ronment is reflected in a large number of social and cultural

activities. For example, we help restore and maintain important

historic monuments all over the world.

Complete cleaning concepts

Kärcher® is the world’s largest manufacturer of pressure

washers. For decades our name has stood for the highest

standard of quality in respect of engineering, economy

and user friendliness. Kärcher® not only supplies optimized

products, but also intelligent cleaning concepts.

Kärcher® is the world’s largest manufacturer of high-pressure cleaners. For decades our name

has stood for excellent quality in terms of engineering, economy and user friendliness. Kärcher®

supplies not only optimised products but also intelligent cleaning concepts.

You can rely on us:

Simply clean – the Kärcher® product world

Our aim is to offer you the perfect solution to any cleaning problem.

For this reason our product portfolio includes everything you need

when it comes to cleaning:

Would you like to know more about the Kärcher® product world?Just call us for a catalogue. We look forward to hearing from you.

Wet and dry

vacuums

Steam cleaners/

spray-extraction

cleaners

Scrubber

driers

Sweepers and

vacuum sweepers

RP. 18-21

RP. 8-11

RP. 16-17

RP. 12-15

Compact class

HD 5/11 C/Plus 1.520-101/-103 500 115/11.5 19.0 1/230/50 2.2 375 x 360 x 935

HD 5/12 C/Plus 1.514-101/-151 500 120/12 23.0 1/230/50 2.2 375 x 360 x 935

HD 5/12 CX/Plus 1.514-501/-551 500 120/12 28.0 1/230/50 2.2 375 x 360 x 935

HD 6/13 C/Plus 1.514-201/-251 230-560 30-130/3-13 24.5/24.8 1/230/50 2.7 375 x 360 x 935

HD 6/13 CX/Plus 1.514-601/-651 230-560 30-130/3-13 29.2/29.5 1/230/50 2.7 375 x 360 x 935

HD 6/15 C/Plus 1.150-601/-603 230-560 30-150/3-15 28/28.3 1/230/50 3.1 375 x 360 x 935

HD 6/15 CX/Plus 1.150-651/-653 230-560 30-150/3-15 30/30.3 1/230/50 3.1 375 x 360 x 935

HD 6/12-4 C/Plus 1.150-150/-152 300-600 20-120/2-12 29.5/29.8 1/230/50 2.8 375 x 360 x 935

HD 6/12-4 CX/Plus 1.150-151/-153 300-600 20-120/2-12 31.5/31.8 1/230/50 2.8 375 x 360 x 935

HD 7/18 C/Plus 1.151-601/-603 240-700 20-175/2-17.5 29/29.3 3/400/50 5.0 375 x 360 x 935

HD 7/18 CX/Plus 1.151-651/-653 240-700 20-175/2-17.5 31/31.3 3/400/50 5.0 375 x 360 x 935

Medium-duty class

HD 6/16-4 M/Plus 1.524-100/-107 230-600 30-160/3-16 43/43.3 1/230/50 3.4 467 x 407 x 1010

HD 6/16-4 MX/Plus 1.524-101/-108 230-600 30-160/3-16 45/45.3 1/230/50 3.4 467 x 407 x 1010

HD 7/18-4 M/Plus 1.524-200/-208 240-700 10-180/1-18 43/43.3 3/400/50 5.0 467 x 407 x 1010

HD 7/18-4 MX/Plus 1.524-201/-211 240-700 10-180/1-18 45/45.3 3/400/50 5.0 467 x 407 x 1010

HD 9/19 M/Plus 1.524-300/-308 450-890 40-185/4-18.5 43/43.3 3/400/50 6.8 467 x 407 x 1010

HD 9/19 MX/Plus 1.524-301/-311 450-890 40-185/4-18.5 45/45.3 3/400/50 6.8 467 x 407 x 1010

HD 9/20-4 M/Plus 1.524-401/-403 460-900 40-200/4-20 46.9/47.2 3/400/50 7.0 467 x 407 x 1010

HD 9/20-4 MX Plus 1.524-404 460-900 40-200/4-20 49.2 3/400/50 7.0 467 x 407 x 1010

Super class

HD 10/21-4 S/Plus 1.286-320/-323 1000 210/21 62/62.3 3/400/50 7.8 560 x 500 x 1090

HD 10/21-4 SX Plus 1.286-324 1000 210/21 64.0 3/400/50 7.8 560 x 500 x 1090

HD 10/23-4 S/Plus 1.286-328/-329 1000 230/23 64 3/400/50 7.8 560 x 500 x 1090

HD 10/23-4 SX Plus 1.286-330 1000 230/23 64 3/400/50 7.8 560 x 500 x 1090

HD 10/25-4 S/Plus 1.286-101/-201 500-1000 30-250/3-25 62.0 3/400/50 9.2 560 x 500 x 1090

HD 10/25-4 SX Plus 1.286-501 500-1000 30-250/3-25 64.0 3/400/50 9.2 560 x 500 x 1090

HD 13/18-4 S Plus 1.292-101 650-1300 30-180/3-18 62.0 3/400/50 9.2 560 x 500 x 1090

HD 13/18-4 SX Plus 1.292-501 650-1300 30-180/3-18 64.0 3/400/50 9.2 560 x 500 x 1090


HD 600 1.284-105 240-650 10-105/1-10.5 29.0 1/230/50 3.3 500 x 310 x 350

HD 715 1.151-501 240-700 10-160/1-16 29.0 3/400/50 4.7 500 x 310 x 350

HD 16/15-4 Cage Plus 1.367-101 500-1600 10-150/1-15 75.0 3/400/50 9.5 710 x 685 x 795

HD 22/15-4 Cage Plus 1.367-120 800-2200 30-150/3-15 112.0 3/400/50 12 880 x 725 x 825

HD 17/20-4 Cage Plus 1.367-130 800-1700 30-200/3-20 112.0 3/400/50 12 880 x 725 x 825

HD 2000 Super 1.068-111 500-1800 10-200/1-20 130.0 3/400/50 13.4 1020 x 760 x 1000

HD 11/35 EC-B Cage 1.367-201 1140 350/35 218.0 3/400/50 15 1200 x 890 x 905

HD 2/150 1.331-104 120 1500/150 85.0 3/400/50 8.4 710 x 676 x 817

HD 5/17 C 1.214-120 250-700 30-100/3-10 31.3 1/230/50 4.5 375 x 360 x 935

HD 7/10 CXF 1.151-611 250-700 30-100/3-10 31.3 3/400/50 4.5 375 x 360 x 935

HD 1000 Si 1.924-111 150-840 10-130/1-13 85.0 3/400/50 5.6 1005 x 500 x 820

Class Model Order No. Water flow Pressure Weight Power supply Connected Dimensions

rate (l/h) (bar/MPa) (kg) (Ph/V/Hz) load (kW) (L x W x H)

Cold Water High-Pressure Cleaners

with Electric Motor

Po

· 0

1/2

007 ·

Ord

er

No.

0.0

14-6

94 ·

Printe

d in G

erm

any o

n p

ap

er

ble

ached

without

chlo

rine ·

Sp

ecifi

catio

ns s

ub

ject

to c

hang

e w

itho

ut

no

tice.

Please contact us for more information:

Head Office GermanyAlfred Kärcher GmbH & Co. KGAlfred-Kärcher-Str. 28 – 4071364 Winnenden Tel. +49-7195-14-0 Fax +49-7195-14-2212www.kaercher.com

United KingdomKärcher (UK) LtdBeaumont RoadBanburyOxon OX16 1TBTel. +44-1295-752-100Fax +44-1295-752-103www.karcher.co.uk

Regional Head OfficeAsia-PacificKarcher Asia-Pacific Pte Ltd5 Toh Guan Road East,#01-00 Freight Links Express Distripark,Singapore 608831Tel. 65-68971811Fax 65-68971611www.karcher.com.sg

AustraliaKärcher Pty. Ltd.40 Koornang RoadScoresby VIC 3179VictoriaTel. + 61-3-9765-2300Fax + 61-3-9765-2399www.karcher.com.au

South AfricaKärcher (Pty) LtdKärcher (Pty) Ltd144 Kuschke StreetMeadowdale Edenvale1614South AfricaTel. +27-11-574-5360Fax +27-11-454-4682

IrelandKarcher Ltd (Ireland)12 Willow Business ParkNangor RoadDublin 12Tel. +353-1-409-7777Fax +353-1-409-7775

Hong KongKärcher LimitedUnit 10, 17/F, APEC Plaza49 Hoi Yuen Rd., Kwun Tong, KLNTel. +852-2-357-5863Fax +852-2-357-5632www.karcher.com.hk

New ZealandKarcher LimitedEast TamakiAucklandTel. +64-9-274-4603Fax +64-9-274-5609www.karcher.co.nz

United Arab EmiratesKarcher FZEP.O. Box 17416Plot No. S-10104, South ZoneJebel Ali Free Zone, Dubai, UAETel. +971(0)4-886-1177Fax +971(0)4-886-1575www.kaercher.com

Karcher Canada Inc.6975 Creditview Road Unit #2Mississauga OntarioL5N 8E9CanadaTel. +1-905-672-8233 Fax +1-905-672-3155 www.karcher.ca

Date post:	30-Oct-2014
Category:	Documents
Upload:	aromabox-aromakozmetika
View:	56 times
Download:	4 times

HD

Documents