2
HDPE SOLUTIONS HDPE SOLUTIONS Specified Fittings
HDPE SOLUTIONSHDPE SOLUTIONS
Specified FittingsN
W E
S
Specified Fittings
N
W E
S
Bellingham, WA164 West Smith Rd.
Bellingham, WA 98226(360) 398-7700
Stevensville, MT483 Stevensville Airport Road
Stevensville, MT 59870(406) 777-3466
Early Branch, SC320 Commerce ParkwayEarly Branch, SC 29916
Three Convenient Manufacturing Facilities Located In:
Visit us at: specifiedfittings.com
A Full Line of Fabricated Fittings 63” and Smaller
Huge Inventory of Molded and Electrofusion Fittings
Competitively Priced Solutions
In-House CAD Design
Ship Anywhere in North America
We Make You Look Good!
Contact our friendly customer service sta� for helpful information on sizes and
availability along with useful technical information.
What We Do... 99% on-time shipments
One of the only HDPE & PVC manufacturers in North America
Customer service that has a small business feel and is 2nd to none
Over 30 years of well-established manufacturing cababilities
We have three factories producing parts 24 hours a day, located
in Stevensville, Montana; Bellingham, Washington; and Early
Branch, South Carolina.
FM Approved
Visit us at www.speci�ed�ttings.com.
Added Bene�ts of Choosing Speci�ed Fittings
We are available Monday through Friday:
PVC - (360) 398-7700 from 6AM - 5PM PST
HDPE - (406) 777-3466 from 6AM - 5PM MST
HDPE from 6AM - 5PM MSTPVC from 6AM - 5PM PST
HDPE FABRICATED FITTINGS
HDPE MOLDED FITTINGS
HDPE SPECIFICATIONSHDPE FABRICATED FITTINGS (CONT’D) MACHINE SHOP & OTHER SERVICES
ALSO WORTH NOTING
TeesLine Tees up to 48”. Reducing Tees up to 63”.
We fabricate HDPE �ttings in our Stevensville, Montana and Early Branch, South Carolina facilities. These �ttings are available in sizes 1/2” through 63” in both IPS and DIPS where applicable.
Speci�ed Fittings certi�es the referenced materials’ conformance to the following Standards and Speci�cations:
We stock a wide variety of molded HDPE �ttings in our Stevensville, Montana and Early Branch, South Carolina facilities as well as our Longwood, Florida warehouse.
Our inventory of molded �ttings include:
Hydro TestingThis service is available in both Bellingham, WA and Stevensville, MT. Contact [email protected] for HDPE and [email protected] for PVC testing.
FM TestingThe world’s most-trusted leader in third party certi�cation.
PVC FittingsWe o�er a full line of fabricated and molded PVC �ttings. In fact, we are the largest PVC fabricated manufacturer in the US!
Data-Logging ServicesWe proudly offer Data Logging Services for our fabricated and fused HDPE products. Please contact our HDPE Sales Department ([email protected]) for more information.
Speci�ed Fittings has two complete machine shops (Bellingham, Stevensville) that can do a myriad of functions:
* Fittings can be manufactured and tested in conformance to AWWA C901/C906, FM listed. Any of these options must be noted at time of quote submittal and order submission.
Elbows90° (3pc & 5pc), 60° (3pc), 45° (3pc & 2pc), 30° (2pc), 22-1/2° (2pc), 11-1/4° (2pc), and custom angles and piece count available upon request.
Valve SpacersAvailable up to 65" at certain sizes, DRs, PSI ratings. Please contact factory for more details.
Wall AnchorsAvailable in 1/2” up through 63”.
Pulling HeadsWe o�er pulling heads 2” through 63” in diameter. We will build whatever size and DR needed to pull. Sizes over 24” will be reduced to 24”.
Wyes45° Lateral Wyes to 48”. True Wyes to 48”.
CrossesLine Crosses to 48”. Reducing Crosses to 48” x 42”.
Swedge & Plate Style Reducers - Concentric & EccentricAvailable up to 63”, these can shrink large diameter pipe down three sizes in one step, making a fully compact and pressure rated reducer.
Pulled Style Reducing TeesAvailable with mainlines up to 63” and outlets to 48”. Sizes and con�gurations vary. Save time and space in the �eld—fewer �eld fusions and shorter lay lengths.
Structures & HeadersManholes, Tanks, Spools, Headers, Manifolds. If you can dream it, we can build it!
Dual ContainmentDual Containment piping and �ttings in a range of sizes.
Sweep BendsAvailable from 2” - 20” in both 45° and 90° angles.
Transition FittingsGrooved end, Weld end, MIPT, or FIPT available in Epoxy coated, Carbon Steel, Stainless Steel, Brass, and PVC.
Elbows45° and 90° in DR7, DR9, DR11, and DR17.
TeesLine Tees in DR7, DR9, DR11 and DR17.Reducing Tees in DR11 and DR17.
ReducersAvailable in 1/2” through 12” in DR7, DR9, DR11, and DR17.
Flange AdaptersAvailable from 1” - 63” in all DRs.
Backing RingsAvailable from 1” - 63” in Ductile Iron, Carbon Steel, Stainless Steel, Epoxy Coated, Polypropylene, and Galvanized.
Mechanical Joint AdaptersAvailable in 2” - 24” with or without internal sti�ener.
Mechanical Joint Accessory KitsAvailable in 2” - 24” in either carbon steel or stainless steel.
CapsAvailable in 2” - 8”, DR7, DR9, DR11, & DR17.
Electrofusion FittingsWe stock a complete line of Electrofusion Fittings.
CNCCapabilities up to 24”.
Drilling / BoringWe can o�er specialty perforated piping as well as custom made parts.
MachiningWe have large machine shops capable of turning up to 20 ft. in diameter parts to whatever speci�cation or special application you may need.
BevelingWe can bevel from a lower DR to a higher DR with our beveling capabilities with no abrupt shoulder.
Looking for steel, stainless, or other metal components for PVC or HDPE bids? We are open to bidding projects including: Fish Hatcheries WWTP WTP
Desalinization Plants Pump Rooms and many more!
Branch SaddlesMachined Sidewall Fusion Branch Saddles up to 18” outlets. Electrofusion Branch Saddles up to 12” outlets.
CapsWe can make pressure rated caps through 24” with no reducers. Available through 63” by reducing down to 24”.
ASTM F714 Standard speci�cation for Polyethylene (PE) Plastic Pipe (SDR-PR). Based on Outside Diameter.
ASTM F2206 **Available upon Request** Speci�cation for Fabricated Fittings of Butt-fused Polyethylene Plastic Pipe, Fittings, Sheet Stock Plate Stock or Block stock.
ASTM D3350 Standard Speci�cation for Polyethylene Plastic Pipe and Fittings Material.
ASTM D3035 Standard Speci�cation for Polyethylene (PE) Plastic Pipe
(SDR-PR). Based on Controlled Outside Diameter.
ASTM D3261 Standard Speci�cation for Butt Heat Fusion (PE) Plastic
Fittings for Polyethylene Plastic Pipe and Tubing.
AWWA C901 **Available upon Request** Polyethylene (PE) Pressure Pipe and Tubing, 3/4 in. (19mm) Through 3 in. (76mm), for Water
Service.
AWWA C906 **Available upon Request** Polyethylene (PE) Pressure Pipe
and Fittings, 4 in. (100mm) Through 65 in. (1,650mm), for Waterworks.
ASTM A536 Standard Speci�cation for Ductile Iron Castings
AWWA C116 Protective Fusion-Bonded Epoxy Coatings for the Interior and
Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
AWWA C213 Standard for Fusion-Bonded Epoxy Coatings and Linings for
Steel Water Pipe and Fittings.
A351 Standard Speci�cation for Castings, Austenitic, for
Pressure-Containing Parts.
ASTM F2880 Standard Speci�cation for Lap-Joint Type Flange Adapters for
Plyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
