Scanning and Digitization facilities. The Institute is
equipped with latest version of EMCO MEIR Table
Top CNC Turning and Milling machines with closed
loop systems to impart training in CNC
Programming, The Calibration Laboratory is set up
in CITD with Universal Horizontal metro scope
ULM OPAL 600 Carl Zeiss Technology, Germany
and Slip Gauge Measuring Unit 826 with Millerton
1240, Mahr Germany ,to Calibrate limit Gauges,
Micrometers, Dial indicators, etc.
The Automation Centre is equipped with various
simulator training kits like Advanced Pneumatics
Trainer, Advanced Electro Pneumatics Trainer with
PID Control, Advanced Hydraulics Trainer,
Advanced Electro Hydraulic Trainer, closed loop
Hydraulics Trainer with PID Controls, PLC Trainers
with Allen Bradley, Siemens S95U, S200, S300 &
S400 controllers with STEP5, STEP7 MICROWIN,
STEP7 LITE, STEP7 BASIC Softwares, WINCC
SCADA Systems, Sensors Technology Trainer,
Fluidic Muscle Press Station,
Modular Production Systems with Testing,
Processing, Handling and Sorting Stations, Cut
Section models of various Elements, Transparent
working models of Hydraulics element etc.
The CAD/CAM Centre is equipped with latest
hardware of more than 300 work stations like
Compaq, IBM, DELL & HP Systems and softwares
like Auto CAD, Pro – E wildfire, Catia V5, UG, Ansys,
Nastran, Hypermesh, MasterCam, DelCam, Soild
works, LS-Dyna, Abacus, QForm,Solid Cast etc.
The VLSI and Embedded System laboratory is
equipped with Modelsim Software, FPGA Training
kits, CADENCE Tools with 42 models both for
Analog & Digital design, TANNER Tools, Micro
Controllers like 8051, AVR, Rabbit Processors, KEIL
Software, VX-Works RTOS etc.
The Institute has a special Library with vast
collection of technical books in Tool Engineering,
Automation, VLSI & Embedded System fields and
subscribes to various International Journals like
CIRP Annals, American Machinist, Journal of
Engineering Materials & Technology (ASME),
Precision Engineering (JAPAN) and Precision Tool
Maker etc., The Documentation centre collects and
organizes information and data useful for the
technological advancement in Tool Engineering.
For the dissemination of information, the centre
publishes a computerized current awareness
abstracting bulletin and provides technical
enquiry service.
The Institute also extends its services to the
developing countries by imparting knowledge and
necessary skills to their personnel in the field of
Tool Design, CAD/CAM and Low Cost Automation
Techniques, VLSI & Embedded Systems.
2 WEEKS NON RESIDENTIAL TRAINING PROGRAMMES
TRAINING PROGRAMMES 2013-14(1st April 2013 to 31st March 2014)
Course Details
1. Eligibility Degree/Diploma in Mechanical/Production Engineering or equivalent.
2. Working Hours 10:00 AM to 5:00 PM. 5 Days week
3. Intake Minimum 10 Participants
4. Course Fee Rs. 4,500/- per participantFees includes, Course material & Registration charges
5. Mode of Payment Fee is payable in advance by Demand Draft in favour of “Principal Director” CITD,Balanagar, Hyderabad. Course fee is non-refundable but change in nomination(s) may acceptable.
6. Venue Central Institute of Tool Design, Balanagar, Hyderabad - 37
7. Contact Person Director (Training)
S.No. ProgrammeDuration
(2 Weeks)
1 Geometrical Dimensioning & Tolerancing08.04.13 to 19.04.13
Design and Manufacture of Press Tools
22.04.13 to 03.05.132 Industrial Hydraulics
3 Geometrical Dimensioning & Tolerancing06.05.13 to 17.05.13
Design & Manufacture of Jigs & Fixtures
4. Industrial Pneumatics 20.05.13 to 31.05.13
5. Geometrical Dimensioning & Tolerancing03.06.13 to 14.06.13
Design and Manufacture of Cutting Tools
6. Design of Cutting Tools 17.06.13 to 28.06.13
7. Design of Die Casting & Plastic Processing Tools 01.07.13 to 12.07.13
8. Design of Jigs & Fixtures 15.07.13 to 26.07.13
Tailor made programs can be conducted for the Industries in the area of Tool Design, CAD/CAM courses,Automation, PLC Programing, VLSI & Embedded System on request from Industries.
NON-RESIDENTIAL TRAINING PROGRAMMES
S.No. For SSI &Individuals
ProgrammeCourse Fee in Rs.
For LSI &Govt. Org.
EligibilityDuration
(10 Weeks)
Course Details
1. Eligibility As shown against the columns.
2. Working Hours 10:00 AM to 5:00 PM. 5 Days week (Mon-Fri)
3. Intake Minimum 20 Participants
4. Course Fee Includes Participation & Course material only.
5. Mode of Payment Fee is payable in advance by Demand Draft in favour of “Principal Director” CITD, Balanagar, Hyderabad. Participation fee is non-refundable but change in nomination(s) may be acceptable.
6. Venue Central Institute of Tool Design, Balanagar, Hyderabad - 37
7. Contact Person Director (Training)
1 Design of Cutting Tools
2 3-D Modeling using Unigraphics Software
3 Very Large Scale Integration (VLSI) Design
4 Design of Die Casting & Plastic Processing Tools by using Pro-mold software
5 3D Modeling and Surfacing using CATIA V5 Software
6 Programmable Logic Controllers for Advanced Automation
7 Design of Jigs & Fixtures by using Pro-E software
8 3-D Modeling using Solid Works Software
9 Sensor Technology for Automation
10 Design of Sheet Metal Forming Tools by using Pro-Sheet Metal software
11 Analysis using Ansys and Hypermesh Software
12 Mechatronics & its Applications
10th June 2013 to
16th August, 2013
19th August, 2013 to
25th October, 2013
4th November, 2013 to
10th January, 2014
20th January, 2014 to
28th March, 2014
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
20,000 30,000
For Courses 6,9 & 12
Degree / Diploma in Mechanical / Electrical /
Electronics & Instrumentation
For Courses 1, 2, 4, 5, 7, 8, 10
& 11Degree / Diploma
in Mechanical Engineering with
experience in relevant field.
Note : Proposed courses are subject to change as per the approval from Ministry of External Affairs, Govt. of India
For Course 3
Degree / Diploma in Electrical /
Electronics & Instrumentation
TRAINING PROGRAMMES 2013-14(1st April 2013 to 31st March 2014)
1. Free Training Under Enterpreneurship Skill 1-3 months 10th/ITI/Development Programme (ESDP) Diploma/B.Tech
Pass
2. Advance Mechinist Course (AMC) 2 years 10th Class Pass
350 Candidates sponsored by Ministry of Micro, Smal l and Medium Enterprises, Govt. of India
Sponsored by Govt. of Jarkhand
SPONSORED PROGRAMMES
LONG TERM COURSES
1. Diploma in Tool, Die & Mould Making 4 years 10th Class Pass(DTDM)
2. Diploma in Production Engineering (DPE) 3 years 10th Class Pass
3. Diploma in Electronics & communication 3 years 10th Class PassEngineering (DECE)
4. Diploma in Automation & Robotics 3 years 10th Class PassEngineering (DARE)
5. M.E (Mech - CAD/CAM) 2 years B.E. / B.Tech (Mech. in collaboration with Osmania University, Hyd. / Production / Mechatronics)
6. M.E (Tool Design) 2 years B.E. / B.Tech (Mech. in collaboration with Osmania University / Production)
7. M.Tech. (Mechatronics) in collaboration with 2 years B.E. / B.Tech (Mech/Jawaharlal Nehru Technological University Hyd. ECE/EEE/EIE/
Automobile Engg.)
8. M.Tech. (DFM) in collaboration with JNTUH 2 years B.E. / B.Tech (Mech/(Under Approval) Prod / Automobile /
Aeronautical Engg.)or equivalent
9. M.S. (Mechatronics) part-time in collaboration with 3 years B.E. / B.Tech (Mech/JNTUH (Under Approval) ECE/EEE/EIE /
Automobile Engg.)or equivalent
10. Post Graduate in Tool, Die & Mould Design (PGTD) 1½ year B.E. / B.Tech (Mech Prodn.)
11. Post Graduate in CAD/CAM for Tool 1½ year BE / B.Tech (Mech. Engineering (PGCTE) Prodn.)
12. Post Graduate in Mechatronics (PGM) 1½ year B.E. / B.Tech (Mech/ECE/EEE/EIE/Automobile Engg.)
13. Post Graduate in VLSI & Embedded 1½ year B.E. / B.tech. (CSE/ECE/EEE Systems (PGVES) /EIE) /M.Sc (Electronics)
14. Post Diploma in Tool Design (PDTD) 1 year DME / LME
Advert isement wi l l be issued in the month of Feb/March and candidates are advised to visit the Institute website for details. Courses commences from August every year.
Courses commence on 1st and 3rd week of every month
