2
Table of Contents HEALTH AND SAFETY POLICY ........................................................................................................................ 4
HEALTH AND SAFETY COMMITTMENT ......................................................................................................... 4
CONTACT US ................................................................................................................................................. 5
ASBESTOS ...................................................................................................................................................... 6
CHEMICAL SPILLS .......................................................................................................................................... 7
COMMENT BOX ............................................................................................................................................. 7
COMMITTEES ................................................................................................................................................ 8
CONFINED SPACE ENTRY ............................................................................................................................... 9
DUE DILIGENCE ........................................................................................................................................... 13
EARTHQUAKE .............................................................................................................................................. 13
ELEVATOR FAILURE ..................................................................................................................................... 14
EMERGENCY WARDENS .............................................................................................................................. 14
EMPLOYEE AND FAMILY ASSISTANCE PROGRAM ....................................................................................... 15
EXPLOSION .................................................................................................................................................. 15
FALL PROTECTION ....................................................................................................................................... 16
FIRE EVACUATION PROCEDURES ................................................................................................................ 19
FIRST AID AND EMERGENCY SERVICES ....................................................................................................... 20
FLU VACCINATION PROGRAM .................................................................................................................... 21
GENERAL RULES .......................................................................................................................................... 22
HAZARD ASSESSMENTS, INSPECTIONS AND CORRECTIVE ACTIONS .......................................................... 22
INCIDENT REPORTING AND INVESTIGATIONS ............................................................................................ 24
INSTRUCTION AND TRAINING ..................................................................................................................... 25
LABORATORY SAFETY .................................................................................................................................. 25
LEGISLATIVE REQUIREMENTS ..................................................................................................................... 26
LOCKOUT ..................................................................................................................................................... 27
ORIENTATION .............................................................................................................................................. 30
PERSONAL PROTECTION EQUIPMENT REQUIREMENTS ............................................................................. 32
RECORDS, DOCUMENTS AND STATISTICS ................................................................................................... 32
REPORTING UNSAFE CONDITIONS .............................................................................................................. 32
RESPONSIBILITIES FOR HEALTH AND SAFETY .............................................................................................. 33
RIGHTS OF WORKERS .................................................................................................................................. 34
3
SAFETY RESOURCE LINKS ............................................................................................................................ 35
TRANSPORTATION OF DANGEROUS GOODS .............................................................................................. 36
SECURITY AND PUBLIC SAFETY.................................................................................................................... 36
WELLNESS RESOURCES ............................................................................................................................... 36
WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS)................................................. 38
4
HEALTH AND SAFETY MANUAL
HEALTH AND SAFETY POLICY
Okanagan College is committed to providing a safe, healthy and environmentally responsible workplace and
learning environment for its employees and students. OC believes that no task or activity is so important that it can’t
be done in a safe manner and in compliance with all applicable safety codes and standards.
Okanagan College, therefore, resolves to pursue any reasonable course of action to ensure achievement of these
standards, including the enforcement of all applicable health, safety and environmental protection regulations,
prompt actions to correct unsafe conditions, and continued safety education for all concerned.
It is therefore the policy of Okanagan College to:
Protect the safety of employees, students and visitors against accidents and occupational hazards
Comply with all relevant regulations and standards relating to occupational health and safety
Give priority to safe working conditions and job safety practices in the planning, budgeting, direction and
implementation of OC activities
Every Okanagan College Dean, Director, Principal or Manager is accountable to maintain the standards that are
required to meet this policy. Standards will apply to establishing annual accident prevention objectives and related
action plans, maintaining facilities and equipment, ensuring that employees understand what is expected of them in
accident prevention performance, and endorsing and supporting the OH&S Program.
Each instructional employee or supervisor within the Faculty/Division will ensure that the pertinent regulations and
safe work procedures are followed by all employees or students, that adequate training is provided to the employee
or student and that safe work procedures are implemented on the worksite.
All employees and students are responsible for knowing and observing pertinent regulations in the work area and for
following safe work procedures. Each employee and student is expected to report unsafe conditions and unsafe
behaviour to his/her Instructor or Supervisor.
Your cooperation in observing the proper health, safety and environmental protection regulations is vital to the
success of this objective. It is the responsibility of all employees or students to follow safe work procedures, to
observe health and safety regulations and to constantly work towards improving health and safety standards at
Okanagan College.
Jim Hamilton, President
HEALTH AND SAFETY COMMITTMENT
Okanagan College is committed to ensuring a safe environment for students and employees to learn and work.
Okanagan College ensures that trained personnel are in place to respond to emergencies and that appropriate
resources are available for student and employee well-being.
Through emergency response planning, Okanagan College strives to accomplish the following goals:
Life preservation
Property protection
Service restoration
5
Okanagan College has trained First Aid Attendants and Emergency Wardens and it is our intent to train Emergency
Response Teams. To volunteer for one of these teams, please contact Matt Robertson, Manager, Health, Safety and
Emergency Management Services 250-862-5475 or local 5475.
All employees have a role to play in emergency preparedness – prevention is the key. If we see a hazard we that we
are not able to correct ourselves, notify a supervisor, or Manager, Health, Safety and Emergency Management
Services. In the event of an emergency, contact Security 250-317-2435 or local 6699. Your prompt action is the key
to our success with Health, Safety and Emergency Management. Use this manual as a guide for prevention, and to
prepare yourself, students, and employees, in the event of an emergency.
Thanks,
Matt Robertson
Manager, Health, Safety and Emergency Management Services
CONTACT US
The Health, Safety and Emergency Management Services Department provides support and advisory services to
assist Okanagan College as an employer, as well as its employees, in fulfilling their Occupational Health & Safety
(OH&S) responsibilities. The Department provides regular updates on OH&S status to the Okanagan College
community.
EMERGENCY NUMBERS
Dial 6699 from any campus phone or dial 250.317.2435
(Dial 911 in Revelstoke)
Manager, Health, Safety and Emergency Management Services:
5475 from any campus phone
Direct: 250.862.5475
Okanagan College
1000 KLO Road
Kelowna, BC V1Y 4X8
email: [email protected]
fax: 250.862.5465
Manager, Security and Crisis Management:
5665 from any campus phone
Direct: 250.862.5665
Okanagan College
1000 KLO Road
Kelowna, BC V1Y 4X8
email: [email protected]
fax: 250.862.5465
6
ASBESTOS
Many construction and insulation materials contain asbestos. These materials, if removed or disturbed in an
uncontrolled manner, can release asbestos fibres into the air possibly causing a health hazard. The disturbance and
mishandling of the Asbestos-Containing Materials (ACM) can result from activities performed in close proximity to,
but not necessarily on, asbestos-containing insulation materials. All personnel working with, or in proximity to an
area where there is a likelihood of disturbance to friable (easily crumbled) asbestos products must be informed by
their supervisor of the known and/or potential hazards associated with this exposure.
All asbestos-related work must be performed in accordance with WorkSafe BC’s Occupational Health & Safety
Regulation (OHSR) as a minimum. The work procedures are for the well-being of the personnel involved, the public
and for the environment. Okanagan College has established specific procedures and work practices that meet or
exceed this requirement. These procedures can be obtained from Facilities Management (Asbestos Management
Program).
Purpose
The Asbestos Control Policy is designed to provide information and guidelines for the safe handling of ACM to
promote awareness of its presence and location in facilities at Okanagan College. The goal is to ultimately prevent
incidents of uncontrolled disturbance.
Responsibility
Compliance with this policy is the responsibility of the supervisors of personnel at all levels within administrative,
faculty and ancillary operations, or supervisors of contracted activities where workers may come in contact with
ACM.
All uncontrolled asbestos-disturbance incidents must be reported immediately on discovery to the Health, Safety and
Emergency Management Services Department and Facilities Management. Completion of a Health and Safety
Incident Report is also required from each affected person's supervisor. The Health, Safety and Emergency
Management Services Department and Facilities Management will share any information regarding such incidents
as soon as possible after being notified.
Okanagan College maintains an inventory of structural asbestos for all affected buildings. Facilities Management is
responsible for removal and/or cleanup of asbestos as required as well as for notifying the Health, Safety and
Emergency Management Services Department of all Type 3 Asbestos operations prior to the commencement of any
project.
It is the responsibility of Facilities Management to assess any uncontrolled disturbance of ACM in any college
facility and to determine if further monitoring is necessary.
Contacts
If you have any questions, contact Facilities Management or the Health, Safety and Emergency Management
Services Department.
7
CHEMICAL SPILLS
Procedures
All Personnel:
1. Immediately seal off area to students, employees, and visitors
2. Care for people involved (e.g. flushing eyes for 30 minutes, flushing skin, seeking fresh air)
3. Call 250.317.2435 or 6699 from any campus phone with the following information:
what happened,
type of chemical & properties of chemical,
quantity involved,
number of injured,
action taken, and
location of incident.
Responsibilities
Security/Facilities Personnel will do the following:
Take immediate action as required to safeguard scene, students, employees, visitors, property and
environment
o Recognize – Type of chemical and approximate quantity spilled (see the reportable quantities
index in Appendix 1)
o Evaluate – The properties of the chemical (e.g. flammable, corrosive, or toxic)
o Control – The danger from spreading by taking immediate corrective action where possible to shut
off valves, cap containers, and secure the scene, etc.
Assist response teams as directed or requested
Assist with treating anyone injured
Assist Manager of Health, Safety and Emergency Management Services
Facilities Management will do the following:
Take immediate action as required to safeguard scene, students, employees, visitors, property and
environment
Evaluate the type of clean-up required
Ensure adequate ventilation (amount and method)
Ensure appropriate protective equipment is used for clean-up
Ensure appropriate disposal of chemical and clean-up materials
Notify the Police, and the Provincial Emergency Program (PEP - Ministry of Environment) if the quantities
spilled meet or exceed the reportable quantities index, as specified in Appendix 1.
COMMENT BOX
Okanagan College Health, Safety and Emergency Management Services Department welcomes your comments.
Please complete the form below and then click Submit.
8
If you would like someone to respond to you individually, please provide your email address in the box provided.
Page 1 of 1 Submit
My comment/feedback or question is:
Please email a response to (optional):
Enter a valid email address. Example: [email protected]
Submit
COMMITTEES
Okanagan College (OC) has four Occupational Health & Safety (OH&S) committees representing the following
regions:
South Okanagan – minutes (OC/Employees/ABS/H&S Committees/Penticton)
Central Okanagan – minutes (OC/Employees/ABS/H&S Committees/Kelowna)
North Okanagan - minutes (OC/Employees/ABS/H&S Committees/Vernon)
Shuswap Revelstoke – minutes (OC/Employees/ABS/H&S Committees/Salmon Arm)
Each committee is comprised of worker and employer representatives who consult in a cooperative spirit to identify
and resolve health and safety matters within OC. The committees meet monthly in each region and are responsible
for
ensuring that the college safety program is maintained and reinforced;
reviewing OH&S concerns and suggestions and recommending corrective action;
reviewing the reports of current incidents, their causes and means of prevention;
9
assisting in the dissemination of appropriate information and fostering within the college community an
awareness and appreciation of incident prevention.
The Okanagan College OH&S Committee Terms of Reference document defines the scope of practice of the
membership.
\\Emp.oc\networkfiles\Departmental Files\Ancillary-Business Services\Health and Safety\OH&S Committee Terms
of Reference.docx
CONFINED SPACE ENTRY
This section contains information regarding definitions, confined versus enclosed spaces, personal protective
equipment and procedures involving confined space entry.
A confined space can be defined as a tank, process vessel, underground vault, tunnel, duct or other enclosure not
intended for continuous human occupancy. A confined space
has limited or restricted means for entry and exit;
has poor natural ventilation;
in which there may be an airborne hazardous substance;
is large enough for a worker to enter to perform assigned work.
Confined spaces can present safety and health hazards when there is/are
oxygen deficiency or excess oxygen;
hazardous chemicals;
flammable gases or vapours or combustible dusts;
introduction of liquids or gases during employee occupancy;
activation of electrical or mechanical equipment during occupancy;
slips and falls while entering and exiting the confined space.
Confined Space Entry Terminology
Air Contaminants: Substances in the air that may be harmful to health. Five major types of air contaminants
are dusts, mists, fumes, gases and vapours.
Atmospheric Testing: The testing of the atmosphere within the confined space with approved test
equipment.
Blank: A solid plate installed through the cross section of a pipe, usually at a flanged connection.
Blind: A blank installed at the end of a pipe, which has at that point been physically disconnected from a piping system.
Breathing Apparatus: Consists of a breathing mask, air supply lines complete with an escape pack and air tanks that are stored outside the confined space or self-contained breathing apparatus complete with an alarm.
Combustibles: Gases contained in the atmosphere that may ignite when within the Lower Explosive Limit and Upper Explosive Limit.
Communication: Continuous contact between a worker in a confined space and a worker outside the
10
confined space whereby the worker outside the confined space is aware of activity by the worker inside the confined space.
Confined Space: A space which, because of its construction, location, contents, or work activity therein
provides limited means of entry or exit; has poor natural ventilation; contains or may develop a dangerous atmosphere; may require the use of protective equipment including a capability of immediate rescue of a worker
who enters.
Enclosed Space: Any enclosed area, other than a confined space, in which ordinary job hazards may be intensified.
Hot Work: Any work which produces a source of ignition.
IDLH (Immediately Dangerous to Life and Health): A level of exposure to air contaminants that would result in acute harm to an individual without control measures in place to protect health.
LEL (Lower Explosive Limit): The lowest concentration of a gas or vapour in air that will support a flame when in contact with an ignition source.
Lifting Device: A mechanical device designed specifically for the purpose of lifting (removing) workers from confined spaces.
Lock Out: Stopping and securing a machine, process, or system to protect workers from danger due to unexpected start up or the release of hazardous energy.
Operation or Repairing Equipment: Includes operation valves or switches, tightening bolts, replacing parts or any operation that includes disturbance of the facilities in the confined space.
Oxygen Deficient Atmosphere: An atmosphere where the oxygen content is less than 18 percent.
Oxygen Enriched Atmosphere: An atmosphere where the oxygen content is more than 23.5 percent.
PEL (Permissible Exposure Limit): The maximum concentration of a substance in air to which a worker may be exposed.
ppm (parts per million): A unit of measurement that refers to concentration of a substance in air. Often used with gases or vapours (10,000 ppm equals one percent).
Purging: Displacement of an atmosphere in a confined space by a fluid or gas.
Rescue Equipment: Consists of a shoulder lifting harness and a non-combustible, static-resistant lifeline (for lifting).
Respirable (compressed) air: Compressed breathing air that meets the requirement of CSA Standard CAN 3 Z 180.1 "Compressed Breathing Air", or other standard acceptable to WorkSafe BC.
Safe Atmosphere: An atmosphere that is free of combustibles, toxic gases, and is not oxygen deficient.
11
Standby Person: A person trained in emergency procedures and assigned to remain immediately outside a confined space and in communication with the person(s) inside.
Toxic Atmosphere: An atmosphere which contains levels of an air contaminant greater than the Permissible Exposure Limit.
UEL (Upper Explosive Limit): The highest concentration of a gas or vapour in air that will support a flame when in contact with an ignition source.
Confined versus enclosed spaces
Confined space: A space that, because of its construction, location, contents or work activity provides limited
means of entry or exit, has poor natural ventilation, contains or may develop a dangerous atmosphere, and may
require the use of protective equipment including the capability of immediate rescue of a worker who enters.
Confined spaces are not meant for continuous occupancy, and are likely to be entered only for purposes such as
inspection, maintenance or construction. Limited entry and exit points not only make escape or rescue difficult, but
also can restrict natural ventilation.
Enclosed space: An enclosed space is any area enclosed on all sides and overhead, such as a machinery room,
storage facility or boiler room, where workers may find ordinary job hazards intensified. Enclosed spaces may be
meant for frequent or lengthy human occupancy, and often have accessible points of entry and exit. Requirements
for safe entry to enclosed areas are usually less strict than for confined spaces.
Personal Protective Equipment (PPE)
All workers who could be exposed to danger in or around confined spaces must wear appropriate personal protective
equipment as follows:
hard hat
hearing protection
eye and face protection
steel- toed footwear
gloves
coveralls
Air purifying Respirator in which contaminated workplace air is drawn through an air-purifying device into a
facepiece worn by the worker.
Atmosphere-supplied Respirator in which non-contaminated air is provided under pressure to the worker.
Full body harness and lifeline: Each worker who enters a confined space must wear a full body harness attached
to a lifeline, permitting effective rescue and fall arrest protection if any of the following conditions are present:
a harmful atmosphere which could affect the ability of the worker to escape with assistance
the worker may become entrapped or entangled
the descent is in excess of 10 feet
12
Guidelines
Facilities Management provides written safe work procedures for Confined Space Entry. Effective written safe work
procedures (1) are written in plain language; (2) specify who is responsible for the work; (3) define or list the
confined spaces to which the procedures apply and (4) are followed and applied to the specific circumstances of
each confined space. To obtain a copy of the Confined Space Entry Procedures contact Manager, Operations and
Energy Services.
Facilities Management and the department of Health, Safety and Emergency Management Services provide
employee training.
Access and egress:
A safety checklist for access points and the standby area outside will address the following safety questions:
Are warning signs, barricades or other means of communication provided to prevent inadvertent entry?
o by workers
o by students
o by visitors
Are traffic control measures provided where vehicular traffic could present a hazard?
Do fixed ladders, up to and into the confined space, conform to standards acceptable to WorkSafe BC?
Are temporary ladders positioned and secured properly?
Is the access port and standby area provided with necessary guardrails and toeboards?
Is the standby location adequate in design and area to permit effective rescue?
Entry procedures:
The procedure for entry into a confined space depends on the following factors:
Access and egress to the confined space
Type of work to be completed
Potential hazard encountered (e.g. combustible gas, oxygen deficiency, etc.)
Proximity of possible backup assistance
Based on these considerations, three types of confined space entries have been defined.
TYPE A - ROUTINE INSPECTION AND OPERATION
No presence of harmful gases or oxygen deficiency detected. Inspection and maintenance will not cause the release
of harmful substances into the confined space.
TYPE B – OPERATION AND MAINTENANCE
No presence of harmful gases or oxygen deficiency. The work may cause the release of harmful substances into the
confined space.
TYPE C - UNSAFE ATMOSPHERE
Presence of harmful gases or oxygen deficiency detected. Ventilation does not guarantee a safe atmosphere.
DANGER - NO ENTRY ALLOWED.
The selection of the procedure shall by determined by the supervisor in consultation with the crew prior to entry into
a confined space by an employee.
13
The entry procedure to be used is dependent upon the situation encountered and is not an attribute of a specific
facility. If for any reason work is halted, such as a coffee or lunch break, re-testing of the atmosphere and re-
classification of the entry procedure must be done before resuming work.
DUE DILIGENCE
Due diligence involves identifying workplace hazards and implementing corrective actions to prevent incidents. Due
diligence means taking all reasonable precautions to prevent workplace incidents and may also be used as a defense
for a person charged under occupational health and safety legislation.
EARTHQUAKE
Earthquakes strike without warning. Movement of the ground is seldom the actual cause of death or injury. Most
casualties result from partial building collapse, falling objects and debris, like toppling chimneys, ceiling plaster and
light fixtures.
Knowing how to respond and what to do when there is an earthquake could save your life. It is important to be
familiar with the following procedures.
All Personnel
Know where your emergency telephone numbers are kept.
Before the shaking starts, know the safe spots in your area:
Against inside walls
Under study tables, desks or supported doorways
Know the danger spots:
Windows
Mirrors
Hanging objects
Tall unsecured furniture and fixtures
During the shaking:
If INDOORS, STAY THERE. Get under a desk or table or stand in a doorway or corner.
Do not use elevators.
If OUTDOORS get into an open area away from trees, buildings, walls and power lines.
If in a CROWDED PUBLIC PLACE do not rush for the doors. Move away from shelves that may contain
objects that could fall.
After the shaking stops:
Assess the scene. Assist first aid attendants. Do NOT move injured individuals unless they are in
immediate danger.
If there are severe injuries call 250.317.2435 or 6699 from any campus phone. Send someone for help.
Be prepared for AFTERSHOCKS. Evacuate the building when advised to do so.
14
ELEVATOR FAILURE
All Personnel
If you are in an elevator that stops
Remain calm
Locate and activate the alarm bell
Respond to verbal communication from maintenance workers and follow their requests and directions
Keep everyone back from the doors of the elevator
Do not try to open the doors
If you find an elevator out of order or not working
Try to establish communication with the person(s) who may be in the elevator
Reassure and calm anyone who responds to your call
Do not try to open the elevator doors;
Send a bystander to call 250.317.2435 or 6699 from any campus phone
If you are alone, explain to the person(s) in the elevator that you are going to get help and you will be right
back
Return and wait at the elevator until help arrives
EMERGENCY WARDENS
Emergency wardens and deputy wardens are to be appointed by the administrative head of each
division/department/faculty and coordinated through the Health, Safety and Emergency Management Services
Department.
Emergency Warden fire evacuation procedures
1. Pull alarm
2. Direct someone to call 9-1-1 and OC Security 250.317.2435, or 6699 from any campus phone
3. Evacuate persons from building when alarm bells are ringing
a. Do NOT use elevators
b. Follow directions from emergency wardens, building officials and fire fighters
c. Remain clear of buildings and emergency equipment
d. Do NOT re-enter buildings until permitted by an authorized individual
4. Extinguish fire
ONLY if waste-basket sized or smaller and NOT between you and the exit
Use extinguishers located in corridors
o Pull the pin
o Aim at the base of the fire
o Squeeze the trigger
o Sweep side to side
Evacuating persons with disabilities
1. Identify yourself as a helper and communicate the type of emergency
2. Lend assistance to:
Visually-impaired persons: allow them to take your elbow
15
Hearing-impaired persons: use gestures and written messages
Mobility-impaired persons: escort to designated gathering areas
3. If not on ground floor:
Assist persons with disabilities into stairwells identified as Emergency Refuge Areas; ensure that
anyone who is waiting for assistance is near a wall and promptly rescued
Keep fire separation doors closed
Note the location of all persons within the Emergency Refuge Areas (on site plan) and inform the
Fire Department
Signal to the Fire Department by waving a hand-held light wand to indicate the location of persons
within the Emergency Refuge Areas
Fire Department will assist persons from the Emergency Refuge Areas
Emergency warden non-emergency procedures
Check floor/area monthly to ensure:
1. Flammable materials are removed regularly (rubbish, flammable liquids, oily rags, etc.)
2. Potential sources of ignition are remedied (worn extension cords, overloaded power outlets, overheating
equipment, etc.)
3. Exit signs are in good working order and are properly lit
4. Lighting levels are functional and adequate within public corridors and stairwells
5. Handrails and fire exit stairwells are properly secured and are in good condition
6. Fire exit doors and their self-closing hardware are in good operating condition (these doors must fit
properly, latch and not be wedged open)
7. Exit routes are not obstructed
8. Fire extinguishers are: in place, not obstructed and fully charged
9. Fire alarm devices are: in place, not obstructed and not visibly damaged
Report hazards immediately to Manager, Health, Safety and Emergency Management Services Department at
extension 5475.
See Assisting Persons with Disabilities for more information.
EMPLOYEE AND FAMILY ASSISTANCE PROGRAM
Employee and Family Assistance Program
EXPLOSION
In the event of any explosion on Okanagan College property the following guidelines apply:
All Personnel
Fall to the floor and take shelter from flying glass or debris; protect face and head with arms
Pull alarm
Call 911 and OC Security 250.317.2435 or 6699 from any campus phone
Evacuate building
Do NOT use elevators
Follow directions from emergency wardens, building officials and fire fighters
16
Remain clear of buildings and emergency equipment
Do NOT re-enter buildings until permitted by an authorized individual
FALL PROTECTION
Students and employees who are required to work or be exposed to varied elevations have a potential for injury from
falls.
Okanagan College must ensure that a fall protection system is in place when students or employees work at
elevations greater than 3 m (10 ft) or where a fall from a lesser height involves an unusual risk of injury. Fall
protection systems include (in order of priority):
guardrails
fall restraint equipment
fall arrest equipment
control zones
work procedures
NOTE: refer to WorkSafe BC OHSR Part II for specific requirements
Fall Protection Terminology
Anchor: A secure point of attachment for lifelines or lanyards that is capable of withstanding the loads:
fall restraint - 800 lbs
fall arrest - 5000 lbs
Control Zone: The area between an unguarded edge and a defined line that is set back a safe distance (minimum
2m or 6 1/2 ft).
Exceptional Hazard: A hazard that is over and above a normal hazard of falling to a surface below (e.g. falling
onto a moving conveyor or onto protruding reinforcing steel.)
Fall Distance: The distance from the point where a worker would fall to the point where the fall would be
arrested.
Fall Arrest: Stopping a fall that has occurred before a worker hits the surface below.
Fall Restraint: The use of a work positioning system to prevent workers from falling from the position in which
they are working, or a travel restriction system to prevent workers from travelling to an edge from which they may
fall.
Free Fall: The distance from the point where a worker would begin to fall to the point where the fall arrest system
begins to cause deceleration of the fall.
Full-Body Harness: A configuration of connected straps that distribute a fall-arresting force over at least the
thigh, shoulders and pelvis, with provisions for attaching a lanyard, lifeline or other components.
Horizontal Lifeline: A rail, wire, rope or synthetic cable that is installed horizontally between two anchors. It is
used for attachment of a worker's lanyard or lifeline while permitting the worker to move horizontally.
17
Fall restraint - ultimate load capacity of at least 800 lbs per worker
Fall arrest - certified by a professional engineer
Lanyard: A flexible line of webbing, rope or cable used to secure a full-body harness to a lifeline or anchor.
Lifeline: A line from a fixed anchor or between two horizontal anchors that is used for attachment of a worker's
lanyard, safety belt, full-body harness or other device.
Personal Fall Protection System: A fall protection system which uses a full-body harness to secure each
worker to an individual anchor by means of lanyards, vertical lifelines or other connecting equipment.
Shock Absorber: A component whose primary function is to dissipate energy and limit deceleration forces that
are imposed on the body during fall arrest. With a shock absorber in place a free fall of 6 1/2 feet is permitted in a
fall arrest system.
Swing Fall Hazard: The hazard of swinging and colliding with an obstruction or the ground following a fall by a
worker connected to a lifeline at an angle to the anchor location.
Work Procedures: The prevention of fall injuries by the control zone or safety monitor systems under this
system or other systems established by an employer to minimize the risks from not using a fall protection system.
Responsibilities
Instructors/Supervisors are responsible to
ensure students and employees working at Okanagan College comply with fall protection instructions;
identify workplace fall hazards through job safety analyses;
hold pre-job planning meetings to discuss the fall protection required;
provide approved fall protection equipment for students/employees, including fall restraint and fall
arresting equipment;
provide procedures for maintenance and inspection of fall protection equipment;
provide training in the use of fall restraint and fall-arresting equipment;
maintain training records;
provide attachment points capable of withstanding the forces specified in these instructions;
develop workplace-specific written fall protection procedures.
Manager, Health, Safety and Emergency Management Services is responsible to
review workplace-specific written fall protection job procedures prior to implementation and annually
thereafter.
Facilities Management is responsible to
ensure contractors working at Okanagan College facilities comply with fall protection standards and OHSR;
coordinate with Health, Safety and Emergency Management, Facilities Management office and contractor,
during the design phase of new buildings and upgrades of old or existing structures, regarding Fall
Protection Plan.
Students/Employees are responsible to
use workplace-specific job procedures provided when working in fall hazard locations;
18
control or restrict access, or apply engineering controls if necessary, when working below or around others
who are working overhead;
understand the requirements and use of the Fall Protection System and fall restraint and fall arrest
equipment. Use only OC supplied or approved equipment;
understand the requirement for working on a leading or fixed edge (see “Control Zones” section in this
statement.)
Fall Protection System
Fall Restraint
Restraint protection is rigged to allow the movement of employees only as far as the sides and edge of the
walking/working surface. Temporary anchorage points used for fall restraint must be engineered to be capable of
supporting four times the intended load, with a minimum strength requirement of 364 kg (800 lb.) Workers must:
Work within the confines of a perimeter (standard) guardrail.
Wear a harness attached to securely rigged restraint lines:
o Full-body harness conforms with CSA (Canadian Standards Association) standards
o Rope-grab devices must be used in accordance with manufacturer's recommendations and
instructions.
Inspect fall restraint components before each use for wear, damage and other deterioration. Remove
defective components from service when the components’ function or strength has been adversely affected.
Fall restraint components must be compatible.
Tie restraint lines, independently of other lines, to the anchorage point.
Fall Arrest
Employees exposed to a free fall distance of 3 m (10ft) or more (without restraint) must wear fall arresting
equipment using a full-body harness system. Inspect components of the fall arrest system before each use for wear,
damage and other deterioration. Defective components are removed from service when the components' function or
strength has been adversely affected.
Fall arrest equipment must meet the following minimum criteria:
Hardware used must be drop-forged, pressed or formed steel, with a corrosion-resistant finish with surfaces
and edges smooth to prevent damage to the attached body harness or lanyard.
Vertical life lines must have a breaking strength specified by the manufacture as 27 kN (6000 lbs).
termination knots or splices cannot reduce the strength of lifeline to less than 22 kN (5000 lbs).
Horizontal life lines must be 12 mm diameter wire rope with a manufacturer’s specified breaking strength
of at least 89 kN (20000 pounds).
Increase the above forces by 25% if two workers are connected to the same horizontal static line.
Lanyards must have a minimum tensile strength of 2449 kg (5400lb).
Full-body harness components must be CSA-approved.
Secure full-body harness systems to anchorage points capable of supporting 2272 k (5000 lb).
Protect safety lines and lanyards against cuts or abrasions.
Limit the free fall distance (through rigging) to a maximum of 1.2 m (4 ft) without a shock absorber, or 6
1/2 ft with a shock absorber.
Only one employee may be attached to any one vertical lifeline.
Connect only one snap hook to any one D-ring.
Snap hooks must not be connected to one another.
19
Control Zones
Control zones shall not be used
1. when a slope exceeds a 4 vertical/12 horizontal pitch;
2. during scaffold erecting and disassembling.
A control zone is used for leading edge or fixed edge work where
a minimum distance of 2 m (6.5 ft) from the edge is used to protect students and employees not wearing fall
arrest or fall restraint equipment. NOTE: the control zone should be expanded during adverse conditions
(e.g. slippery roof) or when working at an additional elevation within the "Safe Zone" (e.g. on a step
ladder);
students or employees working within the control zone must be using appropriate fall arrest or fall restraint
equipment;
if work is to be conducted inside the control zone, warning lines must be installed to identify the control
zone. The lines must be highly visible and maintained at a height of between 0.85 m and 1.15 m (34" and
45") at intervals not exceeding 1.8 m (6 ft).
FIRE EVACUATION PROCEDURES
Fire Prevention
Keep your work area neat and clean.
Refrain from plugging space heaters into power bars.
Provide adequate room for space heaters. Manufacturers recommend at least three feet of clearance from
desks and other objects.
Be alert for possible hazards, flammable chemicals, and other sources of ignition in the vicinity of your
work area.
Know and understand the type of work that people are performing nearby and the flammability risk that it
presents to the work you are doing.
Communicate with colleagues in your area about fire safety practices.
A-C-E in Case of Fire
Activate Alarm Pull Station
Call 911 and 6699 or 250-317-2435
Evacuate to nearest Muster Station
o Do NOT use elevators
o Follow directions from emergency wardens, building officials and fire fighters
o Remain clear of buildings and emergency equipment
o Do NOT re-enter buildings until permitted by an authorized individual
Assisting Persons with Disabilities
1. Identify yourself as a helper and communicate the type of emergency
2. Lend assistance to:
Visually-impaired persons: allow them to take your elbow
Hearing-impaired persons: use gestures and written messages
Mobility-impaired persons: escort to designated gathering areas
20
3. If not on ground floor:
Assist persons with disabilities into stairwells identified as Emergency Refuge Areas; ensure that
anyone who is waiting for assistance is near a wall and promptly rescued
Keep fire separation doors closed
Inform emergency wardens of any persons in Emergency Refuge Areas
Fire department will assist persons from the Emergency Refuge Areas
See Assisting Persons with Disabilities for more information.
FIRST AID AND EMERGENCY SERVICES
Okanagan College provides first aid and emergency warden services at all campuses and centres. Report an injury
by calling Campus Security at 250.317.2435, or 6699 from any campus phone. Program 250.317.2435 into your cell
phone.
Responsibilities
Employees are responsible to
o report all injuries to a first aid attendant and to call 250.317.2435, or dial 6699 from a campus phone;
o report all incidents to their supervisor;
o participate in incident investigations as directed by their supervisor;
o complete a Health and Safety Incident Report online for all incidents incurred. A copy of the Health
and Safety Incident Report will be forwarded automatically to the Manager of Health, Safety and
Emergency Management Services.
Students are responsible to
o report all injuries to a first aid attendant and to call 250.317.2435, or dial 6699 from a campus phone;
o report all incidents to their instructor or supervisor;
o participate in incident investigations as directed by their instructor or supervisor;
o complete a Health and Safety Incident Report online with their instructor or supervisor to report any
incidents.
First Aid Attendants are responsible to
o maintain a current first aid certificate, retain a copy of the certificate on their person, participate in
treating patients, and participate in drills, meetings, and training sessions;
o identify themselves to all students and employees, and provide treatment to students and employees;
o request assistance with first aid calls and call 250.317.2435, or dial 6699 from a campus phone;
o complete a First Aid Record for all patients treated;
o complete a Health and Safety Incident Report online for all patients treated. A copy of the Health and
Safety Incident Report will be forwarded automatically to the Manager of Health, Safety and
Emergency Management Services;
o maintain a duty of care for the patient, until the patient has returned to work/class or has been
transferred to the duty of care of a physician (via taxi or ambulance as required).
Emergency Wardens are responsible to
o complete monthly fire safety checklist;
o evacuate persons from building when alarm bells are ringing;
o signal to the fire department by waving a hand-held light wand to indicate the location of persons
within the Emergency Refuge Areas.
21
Managers and supervisors are responsible to
o report all injuries to a first aid attendant and call 250.317.2435, or dial 6699 from a campus phone;
o investigate the causes of incidents and to implement methods to prevent recurrence;
o complete the Health and Safety Incident Report online with an employee involved in an incident. A
copy of the Health and Safety Incident Report will be forwarded automatically to the Manager of
Health, Safety and Emergency Management Services.
FLU VACCINATION PROGRAM
Each year, Okanagan College (OC) offers employees the opportunity to receive a flu vaccination.
Why should I get vaccinated?
Reduces your risk of getting the flu – approximately 10 to 25 percent of Canadians are infected annually
Lessens your chance of developing serious complications if you do get the flu
The BC Centre for Disease Control suggests that anyone who works in an institutional setting, such as a
school or college, should consider being vaccinated
I’m already healthy – do I need the vaccination?
Don't be fooled - the flu can also affect healthy individuals since it spreads very easily by coughing and
sneezing
Healthy individuals may even be carriers of the flu – one in five people can have the virus without
symptoms!
Can I participate?
The vaccine is offered as a shared cost service to OC employees only and participation is voluntary
Any questions regarding the type of vaccination or the after effects should be discussed with your family
physician
Where can I get vaccinated?
Clinics are held at various OC campuses and are generally scheduled in October or November
Watch for information on your campus’ schedule or contact the Manager of Health, Safety and Emergency
Management Services
Where can I get more information?
Prior to flu season, contact the Manager of Health, Safety and Emergency Management Services with any
questions regarding the program
“Inside Okanagan College” by-weekly newsletter
Check out the BC Health Files pages regarding the flu and immunization
22
GENERAL RULES
General health and safety rules apply to all students, employees and contractors at Okanagan College; they must be
followed without exception.
Alcohol and Drugs
In accordance with WorkSafe BC Occupational Health & Safety Regulation (OHSR) 4.20, no Okanagan
College employee or student will be permitted to enter or remain on the premises while his or her ability to
work is affected by alcohol, drugs or other substances so as to endanger his or her health or safety or that of
any other person.
Smoking
In accordance with our vision to provide a smoke-free environment and with WorkSafe BC OHSR 4.81,
smoking is permitted only in designated outdoor areas.
Okanagan College Smoking Policy
Operation of Company Vehicles/Mobile Equipment
Only employees with a valid driver’s license with the correct classification will be permitted to operate
Okanagan College vehicles or mobile equipment. In addition to a valid driver’s license, specific training
may be required for each type of vehicle. Vehicle and mobile equipment operators must wear seat belts.
Improper Activity or Behaviour
In accordance with WorkSafe BC OHSR 4.25, no employee or student shall engage in any improper
activity or behaviour that might create or constitute a hazard to themselves or to any other person. Any
employee or student engaging in such activities will be dealt with in accordance with the appropriate
collective agreement or Student Conduct (Discipline) Policy as outlined in the Okanagan College calendar.
Personal Protective Equipment
All Okanagan College students, employees and visitors are required to wear the specified personal
protective equipment (PPE) for the area or specific job being performed.
HAZARD ASSESSMENTS, INSPECTIONS AND CORRECTIVE ACTIONS
Okanagan College employees inspect job sites, buildings, tools, equipment, machinery and work
practices/procedures in order to prevent harm to people and property. Inspections are conducted in accordance with
applicable legislation and are performed at intervals to prevent incidents.
The following section outlines the responsibilities, procedures, checklists and records for performing inspections.
23
A. Responsibilities and Procedures
Employees are responsible to
o perform formal and informal inspections of their work areas: personal protective equipment,
machinery, tools and equipment;
o complete a pre-op inspection for any mobile equipment including forklift and elevated work platform
operation;
o inspect ladders before each use;
o remove from service any defective equipment, machinery and tools, complete a Corrective Action Plan
Meeting Record and inform supervisor;
o participate in any additional inspections as indicated by supervisor;
o perform work according to safe work procedures;
o ask supervisor for direction with any unfamiliar work procedures;
o inform supervisor immediately of any hazards and ask for assistance with any hazards that you are
unfamiliar with or are not able to correct.
Managers and supervisors are responsible to o guide employees in the conduct of inspections within their work areas and ensure all formal and
informal inspections are performed as required;
o ensure that all pre-op inspections of mobile equipment are performed including forklift and elevated
work platform operation;
o ensure defective equipment, tools and machinery are removed from service and are subsequently
inspected and in good repair before returning to service;
o inform employees of the known and foreseeable hazards of their work areas including operation of any
equipment, tools and machinery;
o instruct and train employees in methods to mitigate hazards;
o complete a Corrective Action Plan Meeting Record to document plans for prompt hazard correction.
B. Inspection of Premises
Regular inspection of premises, equipment, work methods and practices are the direct responsibility of each
department. The Occupational Health & Safety (OH&S) Committees play a contributory role in determining that
inspections are completed and corrective action plans are communicated with the department chair/manager.
In addition to regular inspections, each employee is responsible for the continuous evaluation of their work area or
area of responsibility. Report matters to the faculty/divisional dean/director/manager/supervisor.
Special inspections are required as a result of a malfunction or a serious incident. Department supervisors will
be responsible for ensuring that immediate corrective action is taken where warranted. Report all incidents to the
Manager of Health, Safety and Emergency Management Services and the faculty/divisional dean/director/manager
/supervisor (area).
The faculty/divisional dean/director/manager/supervisor will ensure that corrective action is taken and feedback is
provided to the relevant OHS committee.
ANNUAL INSPECTIONS
The Manager of Health, Safety and Emergency Management Services coordinates an annual inspection of all places
of employment including all buildings, grounds, equipment, machinery and work methods and practices with the
OHS Committee and/or a representative from the respective location.
24
C. Checklists and Records
Acland Inspections
Carpentry Inspections
Collision Repair Inspections
Corrective Action Plan Meeting Record
Heavy Duty and Automotive Inspections
Mechanical Building Trades Inspections
Penno Inspections
Penticton Trades Inspections
Residential Construction Inspections
Welding Inspections
INCIDENT REPORTING AND INVESTIGATIONS
Okanagan College investigates incidents that have either the potential to result in loss or have resulted in loss
including injuries, property damage and near misses. This section outlines the responsibilities and procedures,
reporting of and guidance materials for the investigation of incidents.
Responsibilities and Procedures
Employees are responsible to
o call Campus Security 250.317.2435, or dial 6699 from any campus phone if you are injured or witness
an injury;
o report all incidents and near misses to a supervisor;
o participate in incident investigations as directed by supervisor;
o complete a Health and Safety Incident Report online for any injuries incurred. A copy of the Health
and Safety Incident Report will be forwarded automatically to the Manager of Health, Safety and
Emergency Management Services.
Students are responsible to
o report all injuries to a first aid attendant and to call 250.317.2435, or dial 6699 from any campus
phone;
o report all incidents to their instructor or supervisor;
o participate in incident investigations as directed by their instructor or supervisor;
o complete a Health and Safety Incident Report online with their instructor or supervisor for any
incidents incurred.
Managers and supervisors are responsible to
o report all injuries to a first aid attendant and to call 250.317.2435, or dial 6699 from any campus phone;
o investigate the causes of incidents and to implement methods to prevent recurrence;
o complete the Health and Safety Incident Report with the employee involved in the incident. A copy of
the Health and Safety Incident Report will be forwarded automatically to the Manager of Health,
Safety and Emergency Management Services.
25
Investigation of Incidents
Okanagan College (OC) investigates the causes and contributing factors of (1) injuries requiring medical
treatment, and (2) incidents not involving injury, but having the potential for injury.
Incident investigations must be carried out by persons who are knowledgeable about the type of work involved
and, if feasible, include the participation of one worker representative and one employer representative (Work
Safe BC OHSR 3.8).
The online Health and Safety Incident Report must be completed promptly following an incident. All injury
files and correspondence with WorkSafe BC for the OC regions are maintained by the Health, Safety and
Emergency Management Office.
The Health, Safety and Emergency Management Office completes and transmits the necessary WorkSafe BC
reports and notifications.
WorkSafe BC Reportable Incidents
The following incidents are reportable to WorkSafe BC. Call Campus Security at 250.317.2435 or 6699 from
any campus phone immediately if any of the following incidents occur:
o Death o Building collapse
o Major release of a hazardous substance o Serious injury or mishap
Guidance Materials
Investigation of Accidents and Diseases (WorkSafe BC Publication)
INSTRUCTION AND TRAINING
Health and Safety training includes both formalized training and specific job site instructions where required. Areas
of instruction include, but are not limited to the following:
Emergency Evacuation training
WHMIS training
Transportation of Dangerous Goods
Violence in the Workplace procedures
Occupational First Aid (where required)
LABORATORY SAFETY
All students and employees working within laboratories shall wear safety glasses or goggles. Prescription
glasses may be adequate; consult your instructor. If contact lenses are worn in the laboratory, goggles must
also be worn.
No food or drink is allowed in the laboratory at any time.
Chemical spills must be reported to an instructor immediately. Cleanup of any spills must be overseen by
an instructor. Spills on oneself are critical. Immediately rinse with cold water while an instructor is
contacted.
No chemicals or equipment may be removed from the laboratory.
Personal Protective Equipment (PPE) must be utilized in the laboratory:
Footwear Closed-toe footwear
Laboratory coats Strongly recommended; the wearing of a lab coat is mandatory for anyone
wearing shorts
26
Protective gloves When necessary; if in doubt, contact instructor
Conduct authorized experiments only while in the laboratory.
Students must not use the laboratory in the absence of an instructor or without permission.
Report all injuries to an instructor. If first aid is required, contact a first aid attendant at 250.317.2435 or
extension 6699 from any campus phone.
Store and dispose of chemicals in an appropriate manner. If in doubt contact your instructor.
Make yourself familiar with the operation and location of the following:
o emergency shower/eyewash facilities
o safety cabinets
o fume hoods
o fire extinguishers
o fire blankets
o all exits
o gas shut-off valves
o Material Safety Data Sheets
For further information on the WCB Regulations specific to Laboratories, see WorkSafe BC OHSR, Part 30.
LEGISLATIVE REQUIREMENTS
Okanagan College (OC) activities and operations comply with the WorkSafe BC Occupational Health and Safety
Regulation (OHSR), BC Workers’ Compensation Act, authorities having jurisdiction and OC standards and
guidelines. The OHSR establishes the minimum legal requirements that employers and employees must meet to
protect the health and safety of all workers. The legislation includes, but is not limited to: chemical hazards,
emergency preparedness, ergonomics, first aid, hazard assessment inspections and corrective actions, occupational
health and safety committees and training. While it is the shared responsibility of everyone to understand and
comply with the OHSR, supervisors have an added role to guide employees in complying with the legislation.
Employer and Employee Obligations
The BC Workers’ Compensation Act (WCA) lists the general duties of employers, workers, supervisors and others
within Part 3 Division 3 Sections 115 to 124 of the WCA. Included below is an excerpt:
General Duties of Employers
1. Every employer must
a. ensure the health and safety of
i. all workers working for that employer, and
ii. any other workers present at a workplace at which that employer’s work is being carried out;
b. comply with this Part, the regulations and any applicable orders.
2. Without limiting subsection (1), the employer must
a. remedy any workplace conditions that are hazardous to the health or safety of the employer’s workers.
General Duties of Workers
1. Every worker must
a. take reasonable care to protect the worker’s health and safety and the health and safety of other persons
who may be affected by the worker’s acts or omissions at work;
b. comply with this Part, the regulations and any applicable orders.
2. Without limiting subsection (1), a worker must
a. carry out his or her work in accordance with established safe work procedures as required by this
Part and the regulations.
27
General Duties of Supervisors
1. Every supervisor must
a. ensure the health and safety of all workers under the direct supervision of the supervisor;
b. be knowledgeable about this Part and those regulations applicable to the work being supervised;
c. comply with this Part, the regulations, and any applicable orders.
2. Without limiting subsection (1), a supervisor must
a. ensure that workers under his or her direct supervision
i. are made aware of all known or reasonably foreseeable health or safety hazards in the area where
they work, and
ii. comply with this Part, the regulations and any applicable orders;
b. consult and cooperate with the joint committee or worker health and safety representative for the
workplace;
c. cooperate with the board, officers of the board and any other person carrying out a duty under this Part
or the regulations.
LOCKOUT
Definition
To prevent energy sources from harming people during start-up of equipment and machinery, safeguards or locks
are used to shut off control systems during maintenance and normal operations when risk of injury is present.
Requirement to lockout when machinery is shut down for maintenance or repairs
No work may be done until
all parts and attachments have been secured against inadvertent movement;
the hazard has been effectively controlled where the work will expose workers to energy sources;
energy-isolating devices have been locked out as required by WorkSafe BC Occupational Health & Safety
Regulation Part 10.
Scope
This policy and all lockout procedures shall be complied with by authorized Okanagan College (OC) employees and
contractors. The OC administrator responsible for the contractor(s) shall provide the contractor(s) with a copy of this
policy and the procedures prior to the contractor(s) commencing work.
Lockout Policy
1.0 No one shall operate a tool or piece of equipment if it creates an undue hazard.
1.1 Only authorized and adequately trained employees may work on machinery, equipment and other powered
devices.
1.2 Employees shall abide by lockout procedures for each of the following:
In-line plugs (soft lockout)
In-line disconnect switches
110 volt and 220 volt breaker panels
Main control panel switches
Steam, air, gas, hydraulic and gravity powered devices and machinery
28
1.3 All authorized employees must isolate (lock out) the power supply by following the appropriate OC lockout
procedure(s) where the starting of the machine or inadvertent movement of the machine or its parts, could
cause injury to a person.
1.4 Each authorized employee must use locks assigned to him/her labelled with his/her name. Facilities
Management Maintenance employees may use their ID numbers to identify their locks.
1.5 An employee must neither borrow another person’s lock nor allow another person to borrow his/her
assigned lock(s).
1.6 If required, obtain additional locks from the department chair or from a Faclities Management supervisor.
1.7 If more than one person is working on a machine, all persons are required to attach their personal locks to
the lockout device.
1.8 All persons applying locks in a lockout procedure are responsible to immediately test to ensure that the
locked-out machinery or equipment cannot be operated.
1.9 Each employee must remove his/her own lock when the maintenance procedure is completed.
EMPLOYEES ARE FORBIDDEN TO REMOVE A LOCK BELONGING TO ANOTHER
EMPLOYEE.
1.10 In an emergency or when the department chair and/or dean or Facilities Management have determined that
a personal employee's lock has been inadvertently left on a machine and the work on that machine has been
completed, then the aforementioned individuals are the only persons authorized to remove locks belonging
to other employees.
1.10.1 The department chair and/or dean or a Facilities Management supervisor must make every effort to contact
the employee before taking any action to remove the lock and if he/she does take action he/she assumes full
responsibility for removal of the lock and he/she must ensure that the machinery or equipment can be
operated safely and will not endanger any employee.
1.10.2 The department chair and/or a Facilities Management supervisor must also ensure that before the employee
returns to work he/she is informed that his/her lock has been removed.
1.11 The removal of the last lock is a serious act. Before removing the last lock, the employee is responsible to
ensure that the machinery or equipment can be operated safely without endangering any person.
1.12 All outside contractors working for OC and students enrolled at OC shall follow the OC lockout procedures
and shall use OC locks assigned to him/her.
1.13 The department chairs, where applicable, and a Facilities Management supervisor when the maintenance to
be done is under the direction or control of Facilities Management, shall ensure that the lockout procedures
are maintained, enforced and made available to all students, employees and contractors.
1.14 110 volt and 220 volt lighting breaker panels need not be locked out for the purpose of general maintenance
of lighting systems. Industry safe work practices shall apply.
29
Lockout Procedures
In-line plugs
Machines or tools must be disconnected from their power source according to the following steps before starting any
repairs:
1. Press “off” button or move switch to the off position.
2. Make sure the machine has completely stopped.
3. Disconnect the power supply by unplugging the machine.
4. Place the male end of the plug on the machine. The male end of the plug must be visible to the person
doing the repairs.
5. DO NOT leave the male end of the plug on the floor.
6. Try the start button to make sure the machine is out of operation.
7. Push stop button to ensure machine is off when power is restored.
8. Proceed with the necessary work.
9. Plug the machine back in only when the work is finished.
In-line disconnect switches
Before starting repairs on a machine it must be disconnected from its power source and locked out as follows:
1. Press button to stop machine.
2. Make sure the machine has stopped.
3. Make sure you have the correct in-line disconnect switch.
4. Apply your safety lockout clip to the in-line disconnect switch.
5. Apply your own lock with your name/ID number on it.
6. Try the start button to make sure the machine is out of operation.
7. Push the stop button to ensure machine is off when power is restored.
8. Proceed with the necessary work.
9. Remove your lock only when the work is finished.
Main control panel switches
Machines or devices controlled from main panels must be disconnected and locked out prior to doing any repairs as
follows:
1. Press button to stop machine; make sure the machine is stopped.
2. Make sure you have the correct main manual control.
3. Standing to the side of the main control switch, turn your face away from the switch and activate the switch
with your left hand.
4. Apply a safety clip to the main switch.
5. Apply your own lock with your name/ID number on it.
6. Try the start button to make sure the machine is out of operation.
7. Push the stop button to ensure machine is off when power is restored.
8. Proceed with the necessary work.
9. Remove your lock only when the work is finished.
Steam, Air, Gas, Hydraulic and Gravity Powered Devices and Machinery
The appropriate lockout procedure for electrically-powered machinery and tools is as follows:
30
1. Where a machine or device is connected to a piping system containing hazardous material, the supply valve
must be closed and locked out prior to work. Where piping may introduce hazardous products during the
repair process, the piping shall be disconnected, or effective blanks or blinds installed. Blocking and/or
restraints shall be put into place to prevent any elevated parts from falling during repairs.
2. Residual or stored energy must be relieved or restrained prior to repair work commencing.
3. Commence repairs when all lockout devices, blinds or blanks are in place.
110 Volt - 220 Volt Breaker Panels
Where electrical devices or electrically-powered machinery is powered from a breaker panel, the breaker shall be
locked out before repair work commences as follows:
1. If it is a piece of machinery that is to be worked on, push the stop button.
2. Ensure the machine has stopped.
3. Make sure you have the correct breaker. Turn the breaker to the off position.
4. Apply your own lock to the individual circuit breaker lockout device, or if the panel door is equipped
with a lockable hasp, close the door and place your own lock on the hasp.
5. Test the electrical device or push the start button on the machine to ensure that the power is
disconnected.
6. Push the stop button to ensure machine is off when power is restored.
7. Proceed with the necessary work.
8. Remove your lock and lockout tag only when the work is completed.
ORIENTATION
Role of the Health and Safety Department
To develop and implement OH&S programs
To assist with OH&S initiatives at each centre
To collaborate with WorkSafe BC and other authorities
To provide first aid and emergency warden resources
To guide our OH&S committees
o every campus has its own committee that meets monthly
o Memberships
Responsibility for Safety
Supervisors are responsible to
o ensure employees receive the OH&S training necessary to work safely;
o conduct reviews of safety conditions;
o ensure prompt correction of unsafe work habits and conditions;
o complete Health and Safety Incident Report with employee.
Employees are responsible to
o work in a safe and responsible manner;
o know appropriate OH&S procedures and rules;
o obey safety rules and correct hazards;
o identify and report unsafe conditions to supervisor;
o immediately report all injuries to a first aid attendant and call 6699 from any campus phone or
250.317.2435 and report to supervisor.
General Health and Safety Rules
1. Report all injuries to Security Dispatch and to your supervisor
31
2. No employee shall be on the premises while impaired by alcohol or drugs
3. Smoking is permitted only within designated outdoor areas
4. Company vehicles may only be used by authorized operators
5. No employee shall engage in activity that may pose an undue hazard to any person
6. All persons shall wear the Personal Protective Equipment (PPE) specified for the area and the work
performed
First Aid
Call 250.317.2435 or dial 6699 from any campus phone
Location of First Aid Rooms by campus
Kelowna Penticton Vernon Salmon Arm
Trades Building (T113)
Lab Building (C104E)
Cafeteria (F106G)
PEA6A D317 Staff Room
Workplace Hazardous Materials Information System (WHMIS)
Can you answer the following four questions about the chemicals that you work with?
1. What are the hazards?
2. What do I do to protect myself?
3. What do I do in case of emergency?
4. Where do I get more information?
“WHMIS at Work”
MSDS
Working after hours or alone “Check In … and Check Out”
Call Campus Security at 250.317.2435 to check in and check out when working (1) after hours 10pm – 7am,
or (2) on weekends
Campus Security will ask you for a contact number in case you forget to check out
If you feel that your safety or security may be at risk call Campus Security immediately at 250.317.2435
Suggestion: program 250.317.2435 into your cell
Ergonomics
OC believes in preventing injuries through hazard awareness. Many of us have computer workstations that
we use for a significant portion of our day. To check the setup of your workstation, perform an online self-
assessment by completing the “How to Make Your Computer Workstation Fit You” checklist (p. 26‐29).
WorkSafe BC provides information regarding ergonomic-related injury identification and prevention, BC
OHSR and guidelines, WorkSafe BC publications, and links to other ergonomics resources.
You owe it to yourself to prevent aches, pains and strains.
32
PERSONAL PROTECTION EQUIPMENT REQUIREMENTS
All Okanagan College students, employees and visitors are required to wear the specified personal protective
equipment (PPE) for the area or specific job the individual will be performing. Specific requirements may be posted
in the area or may be obtained from the manager/supervisor of the area.
If you have any questions about personal protection equipment, contact the area supervisor or the Manager of Health,
Safety and Emergency Management Services. Work Safe BC OHSR Part 8.
RECORDS, DOCUMENTS AND STATISTICS
Health and safety-related records, documents and statistics are collected and maintained by the Manager of Health,
Safety and Emergency Management Services.
Incident records and statistics are collected for prevention purposes; that is, to target appropriate corrective actions
for preventing injury. Records and statistics may also be used as a means to measure the success of the Occupational
Health & Safety (OH&S) program and to provide feedback to all departments.
Records and statistics include, but are not limited to the following:
incident reports
first aid records
incident investigation reports
records of incident trends
records of monitoring of exposure to hazards (e.g. excessive noise)
records of worker exposure to hazardous substances
records of hazards that have been identified but not yet controlled
reports of all regular inspections and special inspections
first aid training
emergency warden training
OH&S committee training
forklift operation
elevated work platform operation
WHMIS training
Documents include, but are not limited to the following:
health and safety inspections
incident investigations
OH&S Committee Terms of Reference
OH&S Manual and related documents
REPORTING UNSAFE CONDITIONS
All students and employees are required to report any unsafe or harmful conditions to their immediate supervisor.
The supervisor must ensure that any necessary corrective actions are performed promptly. If an employee or a
student is not satisfied with the action taken, the individual may advise the Manager of Health, Safety and
Emergency Management Services and the Occupational Health and Safety Committee explaining the reason for the
dissatisfaction.
Potential hazards may include, but are not limited to the following:
Operating machinery, tools, appliances or other equipment without authority
Working at unsafe speeds
33
Removing or rendering guards ineffective
Defective tools or equipment
Poor material handling
Failure to lockout or de-energize
Neglecting to wear personal protective equipment
Poor housekeeping
Horseplay
To ensure that workplace housekeeping is maintained at a high level, all students and employees must ensure that
stairwells, doorways, hallways and aisles are kept clear;
spilled material is cleaned up;
fire extinguishers, emergency eyewash and showers are kept clear;
tripping hazards are removed or reported;
poor lighting is reported.
RESPONSIBILITIES FOR HEALTH AND SAFETY
The Work Safe BC Occupational Health and Safety Regulation (OHSR) and the Workers’ Compensation Act (WCA)
outline general responsibilities for safety as noted below (figures in brackets refer to the applicable section in the
OHSR).
Okanagan College Administration is responsible to
o provide a safe workplace (2.2, 4.1);
o report serious incidents to WorkSafe BC: WCA Part 3 Division 10 Section 172;
o ensure adequate direction and instruction of workers in the safe performance of their duties (3.23);
o initiate, maintain and publicize a comprehensive Occupational Health & Safety (OH&S) Program (3.1);
o establish health and safety goals and a policy (3.3) ;
o take action as required to improve unsafe conditions (3.12);
o provide first aid facilities (3.14 to 3.21);
o ensure that personal protective equipment is available (8.2[2]);
o hold management meetings to make periodic reviews of health and safety activities and incident trends
(3.3[d]) ;
o support supervisors and the Manager of Health, Safety, and Emergency Management Services in the
administration of safety activities;
o evaluate safety performance of supervisors;
o set a good example.
Manager of Health, Safety and Emergency Management Services is responsible to
o advise all levels of management and supervisors on safety programs;
o coordinate interdepartmental safety activities;
o maintain safety reference library;
o collect, analyze and disseminate incident statistics and reports (3.3[f]);
o conduct research on special safety matters;
o assist in the investigation of all serious incidents: WCA Part 3 Division 10 Section 173;
o keep current on developments in OH&S;
o conduct periodic Okanagan College-wide inspections as required in OHSR;
o update OH&S manual as required;
o set a good example.
34
Deans/Directors/Instructors are responsible to
o know OC safety policy and personal responsibilities (2.1, 2.2);
o provide proper instruction to new students/employees on safety procedures (3.23);
o ensure that only authorized and adequately-trained students and employees operate machinery or
equipment (4.10[2]);
o enforce OC safety standards and compliance with the OHSR;
o report and investigate all incidents in consultation with the Manager of Health, Safety and Emergency
Management Services;
o correct unsafe conditions and/or acts (3.10);
o ensure regular inspections of equipment and facilities for proper maintenance are completed (3.5);
o detect, interview and if necessary, refer troubled students/employees for assistance;
o formulate safe work procedures for work areas in compliance with Work Safe BC OHSR and OC standards
in consultation with the OH&S committees; Safe Work Procedures Guide
o promote safety awareness within the OC community;
o respond to recommendations of OH&S committees, management and Manager of Health, Safety and
Emergency Management Services;
o set a good example.
Managers and supervisors are responsible to
o ensure employees receive the Occupational Health & Safety (OH&S) training necessary to work safely;
o conduct reviews of safety conditions;
o ensure prompt correction of unsafe work habits and conditions;
o complete Health and Safety Incident Report with employees;
o maintain the following minimum OH&S documentation:
hazard assessment and corrective action
incident investigations
inspections
orientation records
training records.
Employees/Students are responsible to
o know and comply with OC safety standards and the OHSR (2.1, 2.2);
o follow safe work procedures and rules of appropriate workplace conduct (4.25);
o identify and report unsafe acts and conditions (3.10);
o refuse unsafe work (3.12);
o report any injury immediately: WCA Part 1 Division 5 Section 53;
o must not remain on the worksite while their ability to work is impaired (4.20[1]);
o make suggestions to improve OH&S within your work area;
o correct unsafe conditions;
o set a good example.
RIGHTS OF WORKERS
1. Right to Know
Employees have the right to know about hazards within their workplace. The employer must identify and
inform employees about existing and potential hazards.
2. Right to Participate
Employees have the right to take an active role in the health and safety of our workplace. Occupational health
and safety committees play a valuable role in fulfilling every employee’s fundamental right to participate in
identifying, assessing and correcting workplace hazards.
35
At Okanagan College there are many opportunities to become involved in health and safety programs and
activities. Whether you participate at a health and safety committee meeting in your region, get involved in
health and safety inspections, or discuss health and safety remedies with your supervisor, we are all part of a
collaborative health and safety network.
3. Right to Refuse
The right of employers to direct work is balanced by the right of employees to refuse unsafe work that presents
an imminent danger to the health and safety of anyone. Imminent danger represents danger that is not normal
for the type of work being considered.
Procedure:
1. The employee refusing work due to imminent danger notifies their supervisor as soon as possible about the
reason for the refusal.
2. The supervisor investigates and takes action to eliminate the imminent danger.
3. The supervisor ensures that no employee is assigned to perform the work unless the imminent danger has
been eliminated and no one is exposed to the danger.
4. The supervisor may require the employee refusing the work to remain at the workplace and may assign the
employee a temporary work assignment.
5. The supervisor prepares a written record of the employee’s notification, handles the investigation, takes
action and gives the employee and Manager of Health, Safety and Emergency Management Services a copy
of the record.
6. If the employee perceives that the imminent danger still exists the employee may file a report with a Work
Safe BC OH&S Officer.
7. The Officer prepares a written record of the employee’s notification, the investigation and the action taken
and gives the employee and employer a copy of the record.
SAFETY RESOURCE LINKS
CANUTEC - Canadian Transport Emergency Centre
CANUTEC promotes public safety in the transportation of dangerous goods.
CCOHS - The Canadian Centre for Occupational Health & Safety
CCOHS promotes a safe and healthy working environment by providing information and advice about occupational
health and safety.
Canada Safety Council
The Canada Safety Council is a national, non-governmental, charitable organization dedicated to safety. Their
mission is to lead in the national effort to reduce preventable deaths, injuries and economic loss in public and private
places throughout Canada. They serve as a credible and reliable resource for safety information, education and
awareness in all aspects of Canadian life - in traffic, at home, at work and at play.
NIOSH
Provides global leadership to prevent work-related illnesses and injuries.
OSHWEB
Index of occupational safety and health resources on the Internet.
Treasury Board of Canada Secretariat
Occupational Health & Safety - Safety Guide for Laboratory Operations.
36
U.S. Department of Labor - Occupational Safety & Health Administration (OSHA)
The Occupational Safety and Health Administration, provides standards for occupational exposure limits within
workplaces.
WorkSafe BC In concert with workers and employers the mandate of WorkSafe BC is to
promote the prevention of workplace injury, illness and disease;
rehabilitate those who are injured and provide timely return to work;
provide fair compensation to replace workers' loss of wages while recovering from injuries ;
ensure sound financial management for a viable workers' compensation system.
TRANSPORTATION OF DANGEROUS GOODS
The Transportation of Dangerous Goods Act and accompanying regulations are federal laws that legislate the
handling, offer to transport and transportation of dangerous goods as defined in the Act.
Any person who is involved in the transportation of dangerous goods must be trained and certified in an approved
training program or working under the direct supervision of a trained and certified person.
For more information, contact the Health, Safety and Emergency Management Services Department.
SECURITY AND PUBLIC SAFETY
Security and Crisis Management at Okanagan College
WELLNESS RESOURCES
The information contained within this section has been provided for informational purposes only. The content is not
intended to be a substitute for professional medical advice, diagnosis, or treatment. Always seek the advice of your
physician or other qualified health provider with any questions you may have regarding a medical condition.
Okanagan College does not recommend or endorse any specific tests, physicians, products, procedures, opinions, or
other information that may be mentioned in the website links located in the following information sections:
Your Health – General Fitness
Your Health – Specific Diseases Nutrition
Your Mental Health Work-Life Balance
Your Health - General
HealthLinkBC Provides information on more than 3,000 common health topics, tests, procedures and other resources available to
BC residents.
C-Health
Provides health news, feature articles, interactive online tools and other health resources.
37
Health Canada – It’s Your Health
Contains a series of fact sheets that cover a wide range of health topics including: diseases; environment; food;
medical information choices; lifestyle and consumer products. The articles also include Internet links and references
to more information.
Interior Health Authority
Interior Health, with an office in Kelowna , serves a region that stretches from Williams Lake to the US border and
from Anahim Lake in the Chilcotin to the Alberta border - incorporating approximately 690,000 people.
Your Health - Specific Diseases
Alzheimer’s Disease
Alzheimer Disease is a progressive, degenerative disease. The number of people in Canada with dementia is
expected to grow by the year 2031 to over 3/4 million people.
Arthritis
Arthritis ('arth' meaning joint, 'itis' meaning inflammation) isn't a one-note story or even a few variations on a single
theme; it actually consists of more than 100 different conditions.
Cancer
The Canadian Cancer Society estimates that 177,800 new cases of cancer and 75,000 deaths will occur in Canada in
2011.
Diabetes
The Canadian Diabetes Association estimates that three (3) million Canadians have diabetes. This website outlines
the three types of diabetes, the seriousness of the disease, the symptoms, the risks, how it is treated, how to detect if
you have it and how to prevent the disease.
Heart and Stroke
The Heart and Stroke Foundation of Canada states that heart disease and stroke are the leading causes of death and
disability in Canada. Learn more about risk factors, warning signs and healthy living.
Your Mental Health
Canadian Mental Health Association
CMHA promotes the mental health of all people and serves mental health consumers, their families and friends.
Mental Help Net
Provides online mental health information, news and resources to the worldwide mental health community of
professionals and laypeople.
Health Canada – Mental Health
Provides access to online materials related to the promotion of mental health, the planning, delivery, cost and
evaluation of mental health programs and services in Canada and the mental health conditions and disorders
encountered by Canadians.
Fitness
Canada's Physical Activity Guide to Healthy Active Living
Promotes healthy lifestyle choices and activities and disease prevention strategies.
American College of Sports Medicine
38
Mayo Clinic – Fitness and Sports Medicine Center
Nutrition
Dietitians of Canada
Provides information regarding healthy food choices, activity patterns and body weight. The online EATracker
includes a daily food intake and activity log.
Canadian Council of Food and Nutrition
Non-profit organization that acts as a catalyst in advancing the nutritional health and well being of all Canadians by:
Championing evidence-based solutions to key nutritional issues affecting the nutritional health of
Canadians
Advocating for evidence-based nutrition policy in Canada
Promoting public understanding of food and nutritional matters. Mayo Clinic Food and Nutrition Center
provides information regarding eating well and the national dietary recommendations.
Body Mass Index Calculator (BMI)
Offered through Health Canada – Office of Nutrition Policy and Promotion may be used as an assessment tool to
predict possible health benefits or risks based on one’s body weight and height.
Work-Life Balance
Human Resources and Skills Development Canada – Work-Life Balance in Canadian Workplaces helps
organizations design and implement supportive programs and policies facilitating work-life balance.
Saskatchewan Labour - Work and Family Balance offers a variety of resources and services to employers,
employees and community organizations who want to implement work/family change in their workplace.
WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS)
The Workplace Hazardous Materials Information System (WHMIS) provides information about hazardous materials
used at Okanagan College (OC). Anyone using WHMIS-controlled products must have training in identifying the
materials used and in understanding the associated hazards and safety precautions.
OC stores and handles chemicals according to three criteria: (1) Material Safety Data Sheets (MSDS), (2) OC
standards, and (3) applicable legislation.
WHMIS is a communications system designed to provide employees with vital information about hazardous
materials used in the workplace. WHMIS incorporates the following three elements:
1. Labelling
Supplier Labels
When shipped by a supplier, WHMIS products must have a label that identifies the product and alerts
employees to the hazards. Only handle or use chemicals with properly labelled containers.
39
Workplace Labels
Created by employees when labels are illegible or a new label is needed on a secondary container when
chemicals have been decanted (from parent container).
2. Material Safety Data Sheets (MSDS)
MSDS's are “user manuals” providing detailed information about chemicals. MSDS’s are available on-line.
Be familiar with the MSDS’s for the chemicals in your work area.
3. Worker Education and Training
OC provides employees with WHMIS education and training. Know the personal protective equipment
(PPE) that is required for using any chemicals and performing work tasks. Ask your supervisor to clarify
any questions that you have about a chemical or a work process.
Employee education and training is aimed at preventing harm to people and property. This section outlines the
responsibilities, procedures, checklists, records and guidance materials for all employees.
A. Responsibilities and Procedures
Employees are responsible to
o understand the content and significance of labels and MSDS;
o review MSDS before handling products and to check for information not available on product labels;
o communicate with workers in the area about any chemicals being used, the hazards involved and the
methods used to control the hazards;
o wear (PPE) appropriate to the chemical being used and the task being performed;
o perform work according to safe work procedures;
o ask supervisor for direction with any work procedures that are unfamiliar;
o notify supervisor about problems with labels, MSDS and any hazards;
o be able to answer all of the questions listed on the Being an Informed Worker sheet for any chemicals
in the area that work is being conducted.
Suppliers are responsible to
o supply proper labels and MSDS for each chemical supplied;
o keep information on labels and MSDS current by updating MSDS every 3 years or whenever new
information becomes available;
o classify all WHMIS products;
o provide confidential business information (relating to ingredients of chemical) to medical personnel in
case of emergency.
Managers and supervisors are responsible to
o identify all chemicals within the department, complete the WHMIS Inventory Checklist, ensure that
labels are available for each chemical and that MSDS are current (not more than 3 years old);
o ensure that any hazards related to chemical use have been identified and appropriate methods to
control hazards have been implemented (e.g. PPE use, ventilation, etc);
o communicate information to departmental employees regarding chemical use, the hazards involved and
the methods used to control the hazards (e.g. safe work procedures);
o communicate any required corrections to employees individually and ensure that all safe work
procedures have been developed;
40
o ensure all employees have received training in chemical safety, complete the WHMIS Education and
Training Checklist and ensure that all workers can answer the questions listed on the Being an
Informed Worker sheet ;
o provide ongoing coaching as needed, based on findings during inspections of safe work procedures;
o set an example of safe work procedures for all employees to follow.
B. Checklists and Records
Being an Informed Worker
WHMIS Inventory Checklist
WHMIS Education and Training Checklist
C. Guidance Materials
The following guidance material has been included to assist employees, managers and supervisors in meeting their
responsibilities with WHMIS:
WHMIS At Work – WorkSafe BC
Chemical Waste Disposal Procedures
Shipping Document
MSDS