7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

1/8

Heat Transfer Technology

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

2/8

Your local contact:

SPX Flow TechnologyPlatinvej 8, Kolding, DenmarkPhone: +45 70 278 444 Fax: +45 70 278 445

For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.apv.com.

SPX Corporation SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation.Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only andshould not be relied upon unless confirmed in writing.

Issued: 10/2009 1010-03-10-2009-GB Copyright 2007,2009 SPX Corporation

We are only one click away

We would like the opportunity to provide further information andexplain the detailed benefits of APV products and services.For more information about our heat transfer technologies

please contact your local APV sales representative.

SPX Flow Technology

Platinvej 86000 KoldingDenmark

T: +45 70 278 444F: +45 70 278 445E-mail:heat.europe@apv.com

SPX Flow Technology

Shuanghe Road, Linheindustrial ZoneShunyi, Beijing101300.P.R. China.

T: +86 10 89493000F: +86 10 89493224E-mail:heat.china@apv.com

SPX Flow Technology

1200 West Ash StreetP.O. Box 1718 GoldsboroNorth Carolina 27533-1718USA

T: +1 (919) 735-4570F: +1 (919) 731-5498E-mail:heat.usa@apv.com

SPX Flow Technology

Indstria e Comrcio Ltda.Rua Joo Daprat. 23109600-010 , Sao Bernardo do,Campo, SP Brazil

T: +55 11 4366 3100F: +55 11 4366 3103E-mail:heat.southamerica@apv.com

If you already have a duty for a heat exchanger and wantto configure and design it yourself, please visit www.PHEWizard.com.

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

3/8

All the Heat Transfer Technology You Need

Your Access to the Technology

APV invented the plate heat exchanger in 1923and has continuously proven to be the preferred

partner for heat transfer applications. By pio-neering applicable technology in pressing, shap-ing, welding, sealing and testing steel, APV hascontinued to develop and improve heat transfertechnologies.

The company is committed to delivering anefficient and durable solution to ensure opera-tional excellence, effectiveness and profitability.

Your local contact is specialist in offering expertadvice on the right heat exchanger technologyfor a particular application. Several technologiesmay be able to solve a specific duty. However,

the lifetime performance of a heat exchanger,including service cost, fouling and reliability islikely to affect your choice. Your local contact issupported by a global network consisting of four

heat transfer technology and manufacturing cen-tres in USA, Brazil, Denmark and China. They allact as support and distribution centres for heattransfer products.

To find your local representative please visitwww.apv.com

1010-03-10-2009

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

4/8

Power

Dairy Marine

Food

IndustrialBeverage

Pharmaceutical Chemical

Spare Parts and Service On TimeAPV recognises that success depends largelyon continuous plant uptime. In response to cus-tomer needs we offer multiple levels of LifeTimeMaintenance Service agreementsallowing customers to purchase the right level of

service to support their plant successfully. Basicservices are common to all service agreements.Beyond these, each level provides increasingsupport, enabling customers to choose the level

Maximise Your Plant PerformanceAPV is committed to providing operational excel-lence, effectiveness and profitability. We offeran effective and economic heat transfer solutionfor any duty including acid, gasses, oils, fats,

detergents and milk. If the process involves ex-treme pressure, vacuum, pressure drop limitation

or high heat recovery a suitable heat exchangeris available.

This document presents the entire portfolio to

meet your wide variety of requirements.

of support best suited to requirements, includ-ing around the clock support on an emergencybasis.Local expertise and parts availability ensure thatsupport is always on hand for our range of heat

exchangers. These services include re-gasketing,cleaning, general overhaul, preventative mainte-nance and testing.

1010-03-10-2009

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

5/8

Heat

DuraFlowFor medium or high viscosity media.Designed for continuous process and long run time.

For media containing fibres or pulp, requiringhighest possible recovery without blocking.

The DuoSafety system is an early warning system,designed to detect leakages at an early stage andenable the end user to take precautions against in-termixing of the fluids.

Welded plate pairs. Designed with welded channelsallowing handling of aggressive fluids. Widely used forsingle and two-phase heat transfer in refrigeration andin chemical, industrial and petrochemical applications.

EasyFlow

DuoSafety ParaWeld

ParaWeld Conventional

Plate area from 0,01 to 4,6 m2per plate

Welding on plate

Hygienic frames

EnergySaverFor processing low-viscosity media. Designedfor high thermal efficiency with a very closetemperature approach.

Extendable frames to meet stringenthygienic requirements.

Industrial framesWide range of extendable frames formeeting various quality needs.

1010-03-10-2009

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

6/8

For single or multi-purpose product processing.Excellent for food and beverage applicationsprocessing products with particles, productssensitive to texture changes and high viscosity

products.

ParaTube

Transfer Technology to M

A comprehensive range of compactbrazed plate heat exchangers especiallysuited for water heater, district heatingunits, gas boilers, and solar heating.

ParaBrazed

For the concentration of milk, juices,syrups, animal and vegetable extracts,effluents and industrial streams.

Plate Evaporator

1010-03-10-2009

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

7/8

ScrapedSurface HeatExchanger

For viscous products, heat

sensitive products, andproducts containing largerparticles.

HybridFully-welded plate heat exchanger for heating,cooling, condensing and evaporating. Typicallyused for high temperature and high pressure du-ties, e.g. in power, chemical and sugar industries.

SelectionParaFlow - gasketed platesEnergySaver DuraFlow EasyFlow

Description Plate with narrow gapand many contactpoints to secure highthermal efficiency

Plate with wide gapand reduced number ofcontact points to easethe flow of viscousproducts and prod-ucts containing smallparticles. Designed forcontinuous, durableflow and long run time

Wide gap plate withreduced number ofcontact points to easethe flow of viscousproducts and productscontaining fibres orpulp. Designed for longrun time, continuousflow, and extra gentleproduct treatment

Material Plates: AISI 316,

AISI 304, Titanium andmost alloysGaskets: NBR per,EPDM, FKM, andothers

Plates: AISI 316,

AISI 304, Titanium andmost alloysGaskets: NBR per,EPDM, FKM

Plates: AISI 316,

AISI 304, Titanium andmost alloysGaskets: NBR per,EPDM, FKM, andothers

Temperature Rubber gaskets:-35C to 180CGraphite gaskets:-20C to 250C

-35C to 180C -35C to 180C

Pressure 25 bar gauge 0 - 16 bar gauge 0 - 16 bar gauge

Transmission

area/Duty

Up to 3,800 m2 Up to 1,800 m2 Up to 300 m2

Maintenance

access

Full access for cleaningand inspection

Full access for cleaningand inspection

Full access for clean-ing and inspection.Sediments may be CIP

cleaned

ParaTubeScraped SurfaceHeat Exchanger

Hybrid

Description Tubular heat exchangerwith corrugated tubesor straight tubes.Available types include:Double tube, Tripletube, Quadruple tubeor Multi-tube

Consists of a doublewall cylinder with arotating centre axle. 2to 4 rows of scrapingblades mounted onthe axle continuouslyscrape and clean theheating/cooling area

A fully-welded, gasketfree heat exchangercombining highlyefficient plates and astrong vessel construc-tion. The asymmetricand flexible designallows extremely lowpressure drop if re-quired. Can be fullycustomized to meetindividual needs

Material AISI 304L, AISI 316L,Duplex SAF 2205,SAF 2507, and otheralloys

Product contactedparts of AISI 316,hard Chromium,Duplex (SAF2205 orSAF2507), ChromiumNickel or bimetal with awearing layer of Tita-nium alloy

Plates: AISI 316L ormost alloys.Vessel: AISI 316L orcarbon steel

Temperature -30C up to 300C -30C up to 150C -200C to 900C

Pressure 0 up to 100 bar gauge 0 up to 30 bar gauge,depending on type

-1 to 60 bar gauge

Transmission

area/DutyUp to 73 m2in onestandard module

Up to 5,000 kg/h Up to 8,000m2per unit

Maintenance

access

Full inspection onproduct side in allversions.Further cleaning bycirculation of cleaningfluids (CIP)

Full access to replaceall worn parts and tocontrol the cleaning.The heat exchangersare designed for CIPcleaning

Full accessibility forcleaning and inspec-tion without removal ofpiping.Further cleaning bycirculation of cleaningfluids (CIP)

et all Your Needs

1010-03-10-2009

7/27/2019 Heat Transfer Technology 1010 03-10-2009 GB

8/8

GuideoSafety ParaWeld ParaBrazed PlateEvaporator

ble wall (for addedty) consisting of 2rs of plates per flowe in order to drainfluid from leakagee atmosphere. Forin gasketed platet exchangers

Corrugated plateswelded in pairs. Pairsare separated by gas-kets (welded pairs onprocess side, normalgasket technology onthe secondary side)

Plate heat exchangerwithout gaskets. Cop-per soldering joins theplates

Falling film or some-times climbing/fallingfilm evaporation in lowheight modular plateevaporator yieldingsuperior quality con-centrates

es: AISI 316, Tita-

m and other alloyskets: NBR per,

DM, FKM

Plates: AISI 304,

AISI 316, Titanium,C2000, and mostalloys.Gaskets: NBR, EPDM,FKM, and other types

AISI 316L (and cop-

per)

Plates: AISI 316, 904L,

Nickel alloysGaskets: NBR, EPDM

C to 180C Rubber gaskets:-45C to 250C

-50C to 195C Vacuum to max. 130C

16 bar gauge 0 - 35 bar gauge 0 - 30 bar gauge Vacuum to 2 bar gauge

o 400 m2 Up to 2,000 m2 Up to 75 m2 Up to 400 m2

access for cleaninginspection

Welded side: Cleaningby circulation of clean-ing fluids (CIP)

Cleaning by circulationof cleaning fluids (CIP)

Full accessibility toheat transfer surfaces.Easy to dismantle for

inspection of all pro-duct wetted parts

trict Heatingt

CompakvaWater Desali-nation Unit

dular installationnted on a skidsisting of heat ex-ngers together withps, valves, instru-ts, safety equip-t and automation

h as PLC and / oruency converters

For heating of domestictap water and for directand indirect heating

The water desalinationunit is a single stageplate type based evap-orator and condenser,separated by stainlesssteel demister

e heat exchangers: Gasketed,ed, plate and shell

es & fittings: Ac-ding to customerscifications

Stainless steel AISI316 and red bras

Plates (evaporator andcondenser): TitaniumVessel: AISI 316L, withSMO 254 reinforce-ment

o 200C Up to 130C Jacket water:70C -90C. Alsoavailable for steaminjectionSea water: 0C - 32C

o 25 bar gauge Up to 16 bar gauge 6 bar gauge

o 50 MW 1-8 homes Up to 60 m3/24h

ital componentseasily exchange-

The plate heat ex-changer is boltedtogether enabling easycleaning and replace-ment. Can be extendedif necessary

Full access for cleaningand inspection

Ready to Install Solutions

Customer or standard designed pre-builtunits for central heating, central cooling andhot tap water. Designed for easy and time-saving installation and commissioning.

District Heating and

Cooling Unit

For the desalination of sea water, the productionof potable water and fresh utility water.

Water Desalination Unit

A range of small and compact water heatersand district heating units characterized byinnovative technology and design. For heat-ing of domestic tap water and for direct andindirect heating.

Compakva

1010-03-10-2009