MIGUTrans
Heavy duty expansion joint systems
for use by fork lift trucks and pallet trucks hard wearing, maintenance-free, long lasting.
Shopping malls
Railway stations
Exhibition halls
Airports
Hospitals
2
MIGUTrans
MIGUA provide with MIGUTRANS a comprehensive program of heavy duty all-metal expansion joint systems for floors with heavy duty traffic load.
Modern architecture for shopping malls, railway stations, airports, exhibition halls and hospitals hast to fulfill multitude functions and load capacities.MIGUTRANS includes expansion joint systems for low duty by pedestrians, private cars, trucks up to heavy duty with highest point loads by pallet trucks and forklift trucks.Traffic loaded expansion joints are critical areas in the structure of buildings in particular.It may be necessary to consider other criteria, like even loadbearing surface for sensitive goods, fixing on finished surfaces for refurbishment, renovation and modernization, resistance to aggressive media, environmental influences, and watertightness.
Heavy duty expansion joint systems
Test certificatesOfficial test certificates about load capacities are available and can be forwarded on request InstallationApplication and installation instructions will be provided on request. Please contact us. As an alternative you can download it from our website www.migua.comFor installation of the MIGUTRANS profiles in asphalt, please ask for our technical advice.
Important notesWhen installing small installation heights, we recommend the use of epoxy mortar for the filling of the block out, due to the thin coverage above the profile.
In wet areas (canteen kitchens, sanitary rooms etc.), we recommend the use of stainless steel profiles or our watertight MIGUTAN profiles.
Special propertiesProduction lengths can be connected by staggering the joint in the individual aluminium profiles or by using connection pins.
Profiles are set to the mid-point by means of spacer in our works, this guarantees easy installation and correct function of the profile.The profiles can be pre-adjusted on request, to achieve single sided enlargement on the movement capacity.
MIGUTRANS allows designer and architects the possibility to include hard wearing, maintenance-free, long lasting expansion joint systems in their exclusive design:A user-oriented, high sophisticated and well-experienced program of solutions for expansion joints, which meet all functional and esthetic demands of innovative architecture.
Information about load capacity
Symbol
Meaning pedestrians private cars lorries fork lift trucks solid plastic
DIN 1072 DIN 1055 tyres
Load capacities for fork lift trucks are based on pneumatic or rubber tyres with a contact surface of 200 x 200 mm.
3
MIGUTrans Heavy duty expansion joint systems
Index to range of applications / alphabetic 4 - 5
Heavy duty all-metal expansion joint systems
Medium duty profiles – FS 6 - 8
Heavy duty profiles – FS/FSV 9 - 18
– for large joint widths 19 - 21 and large movement capacities
– small installation heights 22 - 23
– Stainless steel and brass surface 24 for highest demands
Profiles for surface fixing – FSN 25 - 29
Profiles for passage free from vibration – FS/FSS 30 - 31
Solid stainless steel / Heavy duty systems
Heavy duty profiles for highest load capacity – STS 32 - 35
Watertight heavy duty profiles for highest load capacity – STW 36
Technical Information
Corner Versions
E4 38 - 41
E3 42 - 43
Dimensions 44
Examples for application
Combined expansion joint systems 45
Small installation heights for blockouts 46
Large installation heights Extremely wide expansion joints 47
In combination with MIGUFOL-vapour barrier 48
Connections to Walls/Columns 49
Connections of single length / Intersections 50 - 51
Illustrations of applications 52 - 53
MIGUA – At a glance 54
Content
4
MIGUTrans
Heavy duty all-metal expansion joint systems
Range of applications
Heavy duty all-metal expansion joint systems
FSN Heavy duty profiles Surface fixing
MIGUA FSN series has mounting brackets for fixing on finished floors for surface fixing (flush connection) – particularly for refurbishment and renovation.The highly sophisticated articulated telescoping system absorbs movement in three directions and ensures maximum functionality, even under difficult conditions. Striated surface and a gap-free visible surface ensure traffic safety.
FS/FSSProfiles for vibration-free transportation
This interlocking system is especially suitable for reducing vibration to a minimum when transporting highly sensitive valuable goods. The solid All-aluminium expansion joint systems FS/FSS meets this demand, particularly maintenance-free, hard wearing and long lasting. Suitable for high load capacities, e.g. lorries, fork lift trucks, with movement in 3 directions (FS 100) or movement in 2 directions (FSS). They are ideal for production and storage facilities.
FSMedium duty profiles
In many applications the planned load capacity is in the normal range, e.g. private cars.MIGUA provide three proven product lines, made of solid aluminium with a highly sophisticated articulated telescoping system (hard wearing, maintenance free, long lasting).
FS/FSVHeavy duty profiles
Especially in construction projects of public and industrial sector heavy duty loads have to be considered. MIGUA offers especially for this sector a wide range of products, based on different criteria.The decisive criterion – distinct motivity, hard wearing, durability under load are considered in our specially designed and individually adapted articulated telescoping system.
Series Page
FS 50 6FS 99 7FS 146 8
Series Page
FS 40 / FS 46 9FS 75 10FS 110 11FS 130 12FS 160 13FS 185 14FS 105 15FS 135 / FS 174 16FS 155 17
FSV 235 18FSV 280 19FSV 285 20FSV 335 21
FS 220 / FS 260 / FS 380 22FS 255 / FS 295 / FS 410 23
FS 110 ES 24
Series Page
FSN 50 25FSN 99 26FSN 146 27FSN 28 - 29
Series Page
FS 100 30
FSS 215 31
5
MIGUTrans Heavy duty all-metal expansion joint systems
Index in alphabetic order
Series Page
FS 40 / FS 46 9FS 50 6FS 75 10FS 99 7FS 100 30FS 105 15FS 110 11FS 110 ES 24FS 130 12FS 135 / FS 174 16FS 146 8FS 155 17FS 160 13FS 185 14FS 220 / FS 260 / FS 380 22FS 255 / FS 295 / FS 410 23
FSN 28 - 29FSN 50 25FSN 99 26FSN 146 27
FSS 215 31
FSV 235 18FSV 280 19FSV 285 20FSV 335 21
STW 100 35STW 160 36
STS 100 32STS 160 33STS 160/16 / STS 160/22 34
Solid Steel / Stainless Steel heavy duty systems
STS Heavy duty profile for highest load capacity
MIGUA offers with series STS a program of Aluminium / Steel / Stainless Steel for high loads of pallet trucks, fork lift trucks, heavy lorries or special vehicles.Main criteria is the vibration free passage to avoid any damage on either building structure or vehicles.
The solid design ensures a reliable horizontal movement (transversal and parallel).
STW Watertight – Heavy duty profile for highest load capacity
STW has the same advantages as STS series, but with an additional sealing layer – watertight. The sealing layer ensures in combination with a suitable connection joint a 100% water-tight expansion joint system.The vibration free passage and a reliable horizontal movement (transversal and parallel) are also ensured: long lasting, maintenance-free. The system is removable and reversible at any time without destroying the connecting area.
Series Page
STS 100 32STS 160 33STS 160/16 / STS 160/22 34
Series Page
STW 100 35STW 160 36
6
MIGUTrans
bt
bs
b f max
h
FS 50
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 50/20 30 10 (± 5) 53 140 20 90 35 3FS 50/35 30 10 (± 5) 53 140 35 90 35 3FS 50/50 30 10 (± 5) 53 140 50 90 35 3
Medium duty profile
Solid all metal-profilehard wearing, maintenance-free, long lasting
Striated surfaceensures good skid resistance
Visible surface has no gapsavoids dirt accumulation
Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
7
MIGUTrans
bt
bs
b f max
h
Medium duty profile
FS 99
Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] FS 99/20 70 40 (± 20) 99 186 20 12FS 99/35 70 40 (± 20) 99 186 35 12FS 99/50 70 40 (± 20) 99 186 50 12
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Striated surfaceensures good skid resistance Symmetrical visible surface shows no gapsavoids dirt accumulation
Articulated telescoping systemabsorbs movement in 3 directions Solid all metal-profilehard wearing, maintenance-free, long lasting
MultiHole mounting bracketfor secure fixing
Heavy duty all-metal expansion joint systems
8
MIGUTrans
bt
bs
b f max
h
Medium duty profile
FS 146
Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] FS 146/22 114 50 (± 25) 146 262 22 12FS 146/30 114 50 (± 25) 146 262 30 12FS 146/42 114 50 (± 25) 146 266 42 12FS 146/52 114 50 (± 25) 146 266 52 12FS 146/62 114 50 (± 25) 146 266 62 12FS 146/77 114 50 (± 25) 146 266 77 12FS 146/87 114 50 (± 25) 146 266 87 12FS 146/97 114 50 (± 25) 146 266 97 12
Solid all metal-profilehard wearing, maintenance-free, long lasting
Striated surfaceensures good skid resistance
Symmetrical visible surface has no gapsavoids dirt accumulation
Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
9
MIGUTrans
bt
bs
b f max
h
FS 40 / FS 46
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 40/19 35 16 (± 8) 40 173 19 300 70 6,5FS 40/35 35 16 (± 8) 40 163 35 300 70 6,5FS 40/60 35 16 (± 8) 40 163 60 300 70 6,5 FS 46/50 35 20 (±10) 46 165 50 300 70 6,5
Heavy duty profile
Symmetrical visible surface
Striated surfaceensures good skid resistance
Solid all metal-profilehard wearing, maintenance-free, long lasting
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
10
MIGUTrans
bt
bs
b f max
h
FS 75
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 75/22 50 20 (± 10) 77 193 22 300 100 9FS 75/30 50 20 (± 10) 77 193 30 300 100 9FS 75/42 50 20 (± 10) 77 197 42 300 100 9FS 75/52 50 20 (± 10) 77 197 52 300 100 9FS 75/62 50 20 (± 10) 77 197 62 300 100 9FS 75/77 50 20 (± 10) 77 197 77 300 70 9FS 75/87 50 20 (± 10) 77 197 87 300 70 9FS 75/97 50 20 (± 10) 77 197 97 300 70 9
Heavy duty profile
Official test certificate on load capacity available Visible surface has no gapsavoids dirt accumulation
Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
11
MIGUTrans
bt
bs
b f max
h
FS 110
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 110/30 75 30 (± 15) 110 226 30 300 70 6,5FS 110/42 75 30 (± 15) 110 230 42 300 70 6,5FS 110/52 75 30 (± 15) 110 230 52 300 70 6,5FS 110/62 75 30 (± 15) 110 230 62 300 70 6,5FS 110/77 75 30 (± 15) 110 230 77 300 70 6,5FS 110/87 75 30 (± 15) 110 230 87 300 70 6,5FS 110/97 75 30 (± 15) 110 230 97 300 70 6,5
Heavy duty profile
Visible surface has no gapsavoids dirt accumulation
Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
12
MIGUTrans
bt
bs
b f max
h
FS 130
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 130/42 100 40 (± 20) 134 254 42 300 70 6,5FS 130/52 100 40 (± 20) 134 254 52 300 70 6,5FS 130/62 100 40 (± 20) 134 254 62 300 70 6,5FS 130/77 100 40 (± 20) 134 254 77 300 70 6,5FS 130/87 100 40 (± 20) 134 254 87 300 70 6,5FS 130/97 100 40 (± 20) 134 254 97 300 70 6,5
Heavy duty profile
Solid all metal-profilehard wearing, maintenance-free, long lasting
Striated surfaceensures good skid resistance
Visible surface has no gapsavoids dirt accumulation
Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
13
MIGUTrans
bt
bs
b f max
h
FS 160
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 160/42 130 60 (± 30) 162 284 42 300 70 6,5FS 160/52 130 60 (± 30) 162 284 52 300 70 6,5FS 160/62 130 60 (± 30) 162 284 62 300 70 6,5FS 160/77 130 60 (± 30) 162 284 77 300 70 6,5FS 160/87 130 60 (± 30) 162 284 87 300 70 6,5FS 160/97 130 60 (± 30) 162 284 97 300 70 6,5
Heavy duty profile
Solid all metal-profilehard wearing, maintenance-free, long lasting
Visible surface has no gapsavoids dirt accumulation
Striated surfaceensures good skid resistance Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: Aluminium Production length: 4 m
Heavy duty all-metal expansion joint systems
14
MIGUTrans
bt
bs
b f max
h
bt
bs
b f max
h
FS 185
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 185/27 140 60 (± 30) 185 305 27 300 70 6,5FS 185/40 140 60 (± 30) 185 305 40 300 70 6,5FS 185/80 140 60 (± 30) 185 305 80 300 70 6,5
Heavy duty profile
Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance
Extremely flat (27 mm)ideal for redevelopment, refurbishment, renovation
Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 3 m
Heavy duty all-metal expansion joint systems
15
MIGUTrans
bt
bs
b f max
h
FS 105
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 105/30 75 20 (± 10) 105 221 30 600 130 15 FS 105/42 75 20 (± 10) 107 223 42 600 130 15 FS 105/52 75 20 (± 10) 107 223 52 600 130 15 FS 105/62 75 20 (± 10) 107 223 62 600 130 15
Symmetrical visible surface has no gapsavoids dirt accumulation
Solid all metal-profilehard wearing, maintenance-free, long lasting
Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Heavy duty profile
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
16
MIGUTrans
bt
bs
b f max
h
bf max
h
bs
bt
Heavy duty all-metal expansion joint systems
FS 135 / FS 174
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 135/25 35 20 (± 10) 135 206 25 600 250 30 Also available as FS 174/25 for joint width up to 70 mm: FS 174/25 70 20 (± 10) 174 245 25 600 130 15
Heavy duty profile
Symmetrical visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance Solid all metal-profilehard wearing, maintenance-free, long lasting
Extremely flat 25 mm
Articulated telescoping systemabsorbs movement in 3 directions
Colour: AluminiumProduction length: 4 m
17
MIGUTrans
bt
bs
b f max
h
Heavy duty all-metal expansion joint systems
FS 155
Heavy duty profile
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 155/30 120 40 (± 20) 155 271 30 600 130 15FS 155/42 120 40 (± 20) 157 273 42 600 130 15FS 155/52 120 40 (± 20) 157 273 52 600 130 15FS 155/62 120 40 (± 20) 157 273 62 600 130 15
Symmetrical visible surface has no gapsavoids dirt accumulation
Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
MultiHole mounting bracketfor secure fixing
Larger installation heights on request.
Colour: AluminiumProduction length: 4 m
18
MIGUTrans
bt
bs
b f max
h
bf max
bt
bs
h
Heavy duty profile
FSV 235
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSV 235/45 150 60 (± 30) 235 357 45 300 70 6,5FSV 235/80 150 60 (± 30) 235 357 80 300 70 6,5FSV 235/90* 150 60 (± 30) 235 357 90 300 70 6,5FSV 235/130* 150 60 (± 30) 235 357 130 300 70 6,5FSV 235/140* 150 60 (± 30) 235 357 140 300 70 6,5
Visible surface has no gapsavoids dirt accumulation Removable bridging unitserviceable for inspection, replaceable centre parts
Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
* Available on request.
Colour: AluminiumProduction length: 3 m
Heavy duty all-metal expansion joint systems
19
MIGUTrans
bt
bs
b f max
h
bf max
bt
bs
h
Heavy duty profile in connection with large joint width and large movements
FSV 280
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSV 280/45 200 85 (± 42,5) 280 403 45 35 35 6,5FSV 280/80 200 85 (± 42,5) 280 403 80 35 35 6,5FSV 280/90* 200 85 (± 42,5) 280 403 90 35 35 6,5FSV 280/130* 200 85 (± 42,5) 280 403 130 35 35 6,5FSV 280/140* 200 85 (± 42,5) 280 403 140 35 35 6,5
Removable bridging unitserviceable for inspection, replaceable centre parts Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
* Available on request.
Colour: AluminiumProduction length: 3 m
Heavy duty all-metal expansion joint systems
20
MIGUTrans
h
b f max
b t
b s
bf max
bt
bs
h
FSV 285
Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] FSV 285/27 240 100 (± 50) 284 404 27 Private carsFSV 285/40 240 100 (± 50) 284 404 40 Private carsFSV 285/80 240 100 (± 50) 284 404 80 Private cars
Solid all metal-profilehard wearing, maintenance-free, long lasting
Symmetrical visible surface has no gapsavoids dirt accumulation Extremely flat (27 mm)ideal for redevelopment
MultiHole mounting bracketfor secure fixing
Articulated telescoping systemabsorbs movement in 3 directions
Larger installation heights on request.
Colour: AluminiumProduction length: 3 m
Heavy duty profile in connection with large joint width and large movements
Heavy duty all-metal expansion joint systems
21
MIGUTrans
bt
bs
b f max
h
bf max
bt
bs
h
FSV 335
Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] FSV 335/ 45 250 100 (± 50) 335 457 45 Private carsFSV 335/ 80 250 100 (± 50) 335 457 80 Private carsFSV 335/ 90* 250 100 (± 50) 335 457 90 Private carsFSV 335/130* 250 100 (± 50) 335 457 130 Private carsFSV 335/140* 250 100 (± 50) 335 457 140 Private cars
Striated surface ensures good skid resistance
Symmetrical visible has no gapsavoids dirt accumulation Removable bridging unitserviceable for inspection, replaceable centre parts
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
* Available on request.
Colour: AluminiumProduction length: 3 m
Heavy duty profile in connection with large joint width and large movements
Heavy duty all-metal expansion joint systems
22
MIGUTrans
bt bs/
b f max
h
bf max
bt / bs
h
Heavy duty profile small installation height
FS 220 / FS 260 / FS 380
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 220/20 60 40 (± 20) 220 220 21 600 130 15FS 260/20 100 40 (± 20) 260 260 21 600 130 15 FS 380/20 215 40 (± 20) 378 378 21 300 70 15
Removablewithout destruction of the adjacent floor
Symmetrical visible surface has no gapsavoids dirt accumulation
Extremely flat, fixing without armsideal for redevelopment, refurbishment, renovation
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
We recommend fixing with Stainless steel Multi-Monti Screws MMS F 7,5 x 95/30 ES (available ex stock), fixing distance: 200 mm.
Colour: AluminiumProduction length: 3 m
Heavy duty all-metal expansion joint systems
23
MIGUTrans
bt bs/
b f max
h
bf max
bt / bs
h
Heavy duty profile small installation height
FS 255 / FS 295 / FS 410
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 255/30 50 60 (± 30) 253 253 30 600 130 15FS 295/30 90 60 (± 30) 293 293 30 600 130 15 FS 410/30 205 60 (± 30) 410 410 30 300 70 15
Removablewithout destruction of the adjacent floor Symmetrical visible surface has no gapsavoids dirt accumulation
Extremely flat, fixing without armsideal for redevelopment, refurbishment, renovation
Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
We recommend fixing with Stainless steel Multi-Monti Screws MMS F 7,5 x 115/50 ES (available ex stock). Fixing distance: 200 mm.
Colour: Aluminium, FS 410: Aluminium, anodizedProduction length: 3 m
Heavy duty all-metal expansion joint systems
24
MIGUTrans
Example: Sand Surface
bt
bs
b f max
h
FS 110 ES
Heavy duty profile with stainless steel- or brass-surfacefor highest demands
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 110/30 ES 75 30 (± 15) 110 226 30 300 70 6,5FS 110/42 ES 75 30 (± 15) 110 230 42 300 70 6,5FS 110/52 ES 75 30 (± 15) 110 230 52 300 70 6,5FS 110/62 ES 75 30 (± 15) 110 230 62 300 70 6,5FS 110/77 ES 75 30 (± 15) 110 230 77 300 70 6,5FS 110/87 ES 75 30 (± 15) 110 230 87 300 70 6,5FS 110/97 ES 75 30 (± 15) 110 230 97 300 70 6,5
Stainless Steel inlayfor highest demands and skid resistance
Visible surface has no gapsavoids dirt accumulation Articulated telescoping systemabsorbs movement in 3 directions
Solid all metal-profilehard wearing, maintenance-free, long lasting
Caroplan
Brass
Sand
Larger installation heights on request. Available with other metal surfaces, e.g.: Brass.
Colour: AluminiumProduction length: 4 m; Stainless steel or brass inlay: 2 x 2 m
Heavy duty all-metal expansion joint systems
25
MIGUTrans
bt
b f min
h
h 1
Medium duty profileProfiles for surface fixing
FSN 50
Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 50 55 10 (± 5) 173 173 15 3 Pedestrians
Solid all metal-profilehard wearing, maintenance-free, long lasting
Visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Ideal for redevelopment, refurbishment, renovation
* light vehicles on request
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
26
MIGUTrans
bt
b f min
h
h 1
FSN 99
Medium duty profileProfiles for surface fixing
Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 99 100 40 (± 20) 219 219 15 3 Pedestrians
Solid all metal-profilehard wearing, maintenance-free, long lasting
Symmetrical visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Ideal for redevelopment, refurbishment, renovation
* light vehicles on request
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
27
MIGUTrans
5.3
bt
b f min
h
bf max
bt
h
h1
Medium duty profileProfiles for surface fixing
FSN 146
Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 146 153 50 (± 25) 390 390 21 6,3 Private cars
Solid all metal-profilehard wearing, maintenance-free, long lasting
Symmetrical visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
Colour: AluminiumProduction length: 4 m
Installation instructions:Any unevenness in the surface to which the profile is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.
Heavy duty all-metal expansion joint systems
28
MIGUTrans
FSN 75 / 110 / 130 / 160
6
FSN 110
h
b f max
b tbt
h
h1
bf min
Solid all metal-profilehard wearing, maintenance-free, long lasting
Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance
Articulated telescoping systemabsorbs movement in 3 directions
FSN
Medium duty profileProfiles for surface fixing
Profile Joint width Total Visible width Total width Installation Thickness of Load capacity Load capacity Load capacity max. Movement of profile of profile height alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSN 46* 50 20 (± 10) 286 286 21 6,3 90 35 6,5FSN 75 84 20 (± 10) 320 320 21 6,3 90 35 6,5FSN 105 112 20 (± 10) 348 348 25 6,3 90 35 6,5 FSN 110 118 30 (± 15) 354 354 21 6,3 90 35 6,5FSN 130 142 40 (± 20) 378 378 28 6,3 90 35 6,5FSN 155 162 40 (± 20) 398 398 24 6,3 90 35 6,5FSN 160 170 60 (± 30) 406 406 34 6,3 90 35 6,5FSN 185 200 60 (± 30) 414 414 18 6,3 90 35 6,5FSN 280 240 60 (± 30) 465 465 21 6,3 90 35 6,5
* cannot take settlements
Colour: AluminiumProduction length: 4 m, FSN 185 and FSN 280: 3 m
Heavy duty all-metal expansion joint systems
29
MIGUTrans
FSN 105 / 155
FSN 185
7h
b f max
b t
FSN 185
bf min
bt
h
h1
FSN 46
5
bt bs/
b f max
h
bt
h h
1
bf min
6
FSN 105
b t
b f max
h
bf min
bt
h
h1
FSN
Medium duty profileProfiles for surface fixing
Installation instructions:Any unevenness in the surface to which the profile is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.
Heavy duty all-metal expansion joint systems
30
MIGUTrans
bt
bs
b f max
h
Heavy duty profilefor transportation free from vibration
FS 100
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 100/30 50 20 (± 10) 102 236 30 300 75 9FS 100/40 50 20 (± 10) 102 236 40 300 75 9FS 100/50 50 20 (± 10) 102 236 50 300 75 9
Solid all metal-profilehard wearing, maintenance-free, long lasting
Transportation free from vibrationsuitable for transport of sensitive goods Articulated telescoping systemabsorbs movement in 3 directions
MultiHole mounting bracketfor secure fixing
Official test certificate on load capacity available
Colour: AluminiumProduction length: 4 m
Heavy duty all-metal expansion joint systems
31
MIGUTrans
bt bs/
b f max
h
bf max
bt / bs
h
FSS 215
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSS 215/23 60 40 (± 20) 215 215 23 600 130 30
Heavy duty profilefor transportation free from vibration
Innovative aluminium alloyfor highest load capacity
Extremely flat 23 mm, fixing without armsTime and cost saving installation, ideal for redevelopment Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods
Absorbs horizontal movement (transverse and parallel) not suitable for vertical movement Solid all metal-profilehard wearing, maintenance-free, long lasting
We recommend fixing with galvanized Multi-Monti Screws MMS P 10 x 70 (available ex stock). Fixing distance: 300 mm.
Colour: AluminiumProduction length: 3 m
Heavy duty all-metal expansion joint systems
32
MIGUTrans
bt
bs
b f max
h
STS 100
Heavy duty profile for highest load capacityfor transportation free from vibration
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 100/30 ES 35 20 (± 10) 105 215 32 600 150 75STS 100/50 ES 35 20 (± 10) 105 215 52 600 150 75STS 100/60 ES 35 20 (± 10) 105 215 62 600 150 75
Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.
Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods
Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement
Larger joint width or movement capacity or special heights on request.
Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).Production length: 1,96 m
Heavy duty all-metal expansion joint systems
33
MIGUTrans
bt
bs
b f max
h
Heavy duty profile for highest load capacityfor transportation free from vibration
STS 160
Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.
Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods
Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 160/30 ES 60 40 (± 20) 165 235 32 600 150 75STS 160/45 ES 60 40 (± 20) 165 235 47 600 150 75STS 160/60 ES 60 40 (± 20) 165 235 62 600 150 75
Larger joint width or movement capacity or special heights on request.
Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).Production length: 1,96 m
Heavy duty all-metal expansion joint systems
34
MIGUTrans
bt bs/
bA
b f max
h
STS 160/16 / STS 160/22
Heavy duty profile for highest load capacityfor transportation free from vibration
Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.
Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods Extremely flat (16 mm), fixing without armsTime and cost saving installation, ideal for redevelopment
Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 160/16 ES 30 40 (± 20) 165 165 17 600 150 75STS 160/22 ES 30 40 (± 20) 165 165 22 600 150 75
Larger joint width or movement capacity or special heights on request.
We recommend fixing with galvanized Multi-Monti Screws MMS F 7,5 x 90/35 (available ex stock), fixing distance: 300 mm.
Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).
Production length: 1,96 m
Heavy duty all-metal expansion joint systems
35
MIGUTrans
bt
bs
b f max
h
Heavy duty profile for highest load capacityfor transportation free from vibration
STW 100 Watertight
Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.
Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods
Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement
Additional sealing layer Watertight in connection with connection joint
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STW 100/30 ES 35 20 (± 10) 105 215 31 600 150 75STW 100/50 ES 35 20 (± 10) 105 215 51 600 150 75STW 100/60 ES 35 20 (± 10) 105 215 61 600 150 75
Larger joint width or movement capacity or special heights on request.
Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).
Sealing layer: Wolfin IBProduction length: 1,96 m
Heavy duty all-metal expansion joint systems
36
MIGUTrans
bt
bs
b f max
h
STW 160 Watertight
Heavy duty profile for highest load capacityfor transportation free from vibration
Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.
Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods
Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement
Additional sealing layerWatertight in connection with connection joint
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STW 160/30 ES 60 40 (± 20) 165 235 32 600 150 75STW 160/45 ES 60 40 (± 20) 165 235 47 600 150 75STW 160/60 ES 60 40 (± 20) 165 235 62 600 150 75
Larger joint width or movement capacity or special heights on request.
Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).
Sealing layer: Wolfin IBProduction length: 1,96 m
Heavy duty all-metal expansion joint systems
38
MIGUTrans
FS 50 E4
FS 99 E4
FS 146 E4
bt
h 2
bs
b f max
h
bf max
hE
bs
bt
h
b t
b s
b f max
h
h2
FS 146/4200 E4
bf max
hE
bs
bt
hbs
b f max
h E
bt
h
bs
b f max
h E
bth
bf max
hE
bs
bt
h
Corner Versions FS E4
Technical Information
39
MIGUTrans
FS 75 E4FS 110 E4FS 130 E4FS 160 E4
FS 40 E4
b t
b s
h
b f max
FS 40/3500 E4
h2
FS 185 E4
bf max
hE
bs
bt
h
b s
b f max
FS 110/6200 E4
b t
h
h2
bf max
hE
bs
bt
h
bs
b f max
h E
bt
h
bs
b f max
h E
bt
h
bf max
hE
bs
bt
h
Corner Versions FS E4
Technical Information
40
MIGUTrans
FSV 235 E4FSV 280 E4
FS 105 E4FS 155 E4
FSV 335 E4
h2
h
b f max
b sb t
FSV 335/45 E4
hE
bf max
bs
h
bt
b s
b f max
h E
b t
h E
bf max
hE
bs
bt
h
bs
b f max
h E
bt
h
hE
bs
bf max
bt
hCorner Versions FS / FSV E4
Technical Information
41
MIGUTrans
h 2
bt
b f max bf max
bt
hE
FSN 50 E4 FSN 99(FSN 146 E4)
FSN 105 E4FSN 155 E4
FSV 285 E4
bs
b f max
h E
bf max
bt
hE
bf max
b t
h2
h
b f maxFSN 99/20 E4
bf max
bt
hE
b t
b s
h2
b f max
h
FSV 285/40 E4
h
bf max
bt
bs
hE
hCorner Versions FSV / FSN E4
Technical Information
42
MIGUTrans
FS 75 E3FS 110 E3 FS 130 E3FS 160 E3
FS 50 E3
FS 99 E3
bt
bs
b f max
h
h 2
bf max
hE
h
bs
bt
bs
b f max
h E
bt
h
bf max
hE
bs
bt
h
b s
b f max
h E
b t
h
bf max
hE
bs
bt
hCorner Versions FS E3
Technical Information
43
MIGUTrans
bs
b f max
h E
bt
h
bs
b f max
h E
bt
h
FS 185 E3
bf max
hE
h
h
bs
bt
FS 155 E3
bf max
hE
bs
bt
Corner Versions FS E3
Technical Information
44
MIGUTrans
Corner VersionsDimensions
Profile Installation height* Corner-Version E3 Corner-Version E4 h bs bt min. joint depth bs bt hE
[mm] [mm] [mm] [mm] [mm] [mm] [mm] FS 40** 19, 35, 60 40 101 35 44 105 40FS 46** 50 48 109 35 52 113 40FS 50 20, 35, 50 53 97 31 55 99 40FS 75 22, 30, 42, 52, 62, 77 ,87, 97 81 141 60 81 141 40FS 99 20, 35, 50 99 143 31 101 145 40FS 105 30, 42, 52, 62 109 169 60 109 169 40FS 110 42, 52, 62, 77 ,87, 97 114 174 60 114 174 40FS 130 30, 42, 52, 62, 77 ,87, 97 138 198 60 138 198 40FS 146 22, 30, 42, 52, 62, 77 ,87, 97 150 210 60 150 210 40FS 155 30, 42, 52, 62 159 219 60 159 219 40FS 160 42, 52, 62, 77 ,87, 97 166 226 60 166 226 40FS 185 27, 40, 80 186 246 75 186 246 50FSV 235 45, 80, (90), (130), (140) 210 271 75 210 271 50FSV 280 45, 80, (90), (130), (140) 256 317 75 256 317 50FSV 285 27, 40, 80 284 354 75 284 354 50FSV 335 45, 80, (90), (130), (140) 311 372 75 311 372 50FSN 46 - 165 35 - 165 40FSN 50 - 113 31 - 115 40FSN 75 - 202 60 - 202 40FSN 99 - 161 31 - 161 40FSN 105 - 228 60 - 228 40FSN 110 - 236 60 - 236 40FSN 130 - 260 60 - 260 40FSN 146 - 272 60 - 272 40FSN 155 - 280 60 - 280 40FSN 160 - 288 60 - 288 40FSN 185 - 303 75 - 303 50FSN 280 - 342 75 - 342 50 * other heights available on request ** Corner Version on request only
Technical Information
45
MIGUTrans
FS 75/62-150
FS 75/22-62
Examples for applicationCombined expansion joint systems
Technical Information
46
MIGUTrans
280 280
280 280
MIGUTRANS expansion joint system installed in existing block out: Profile: FS 75/22
MIGUTRANS expansion joint system , e.g. in connection with hardened paving, magnesite floor screed: Profile: FS 75/22
Examples for applicationSmall installation heights for blockouts
Technical Information
47
MIGUTrans
280
280
280
280
MIGUTRANS expansion joint system with aluminium support plates for extremely wide expansion joints
MIGUTRANS expansion joint system for large installation heights
Examples for applicationlarge installation heightsextremely wide expansion joints
Technical Information
48
MIGUTrans
MIGUTRANS expansion joint system with MIGUFOL vapour barrier
Examples for applicationin combination with MIGUFOL vapour barrier
Technical Information
50
MIGUTrans
For the one-piece anchorage units, positive connection of the individual profile lengths is obtained by use of slide-in connection pins.
For a two-piece anchorage unit, this connection is obtained by staggering the joints in the individual aluminium profiles.
FS 100/30 (two-piece anchorage unit)
Connection of single length Example FS
Additional intersections on request.
Intersections Examples
FS 75/42 (one-piece anchorage units)
Technical Information
52
MIGUTrans
Goethe-Galerie Jena, Germany
Beverage Warehouse Kempf, Germany – STS 100 Airport Hamburg, Underground, Germany – FS 40
Shopping Mall Sachsen Allee, Chemnitz, GermanyUniversity Hospital, Jena, Germany
Shopping Mall, CentrO, Oberhausen, Germany – FS 75 / FS 110Shopping Mall Loop5, Weiterstadt, Germany – FS 75
Hospital UKB Marzahn, Berlin Germany
Exhibition Leipzig, Germany Exhibition Leipzig, Germany
Airport Frankfurt, Germany – STS 160
Illustrations of applications
53
MIGUTrans
Main Railway Station Frankfurt, Germany – FS 40 Bionorica SE, Neumarkt, Germany – STS 160
SIG Combibloc, Wittenberg, Germany
Shopping Mall Halle Mitte, Halle, GermanyAirport Hamburg, Germany – FH FS 40 / ESF 10 / ESF 65
Festhalle, Exhibition, Frankfurt, Germany – FS 75
Millenium Bridge, London, UK
Airport Frankfurt, Germany – FS 185
Railway Station Adlershof, Berlin, Germany
Illustrations of applications
54
MIGUTrans
MIGUa
MIGUA Headquarters in Wuelfrath
At a glance
MIGUA. Market leader in Europe for more than 50 years.
MIGUA is completely focused on expansion joint systems. Leading
architects, designers and general contractors specify our products for
national and international projects. We will gladly provide you with
a list of references, on request. MIGUA expansion joint systems are
used from Abu Dhabi to Zurich providing protection, functionality
and architectural excellence on a permanent basis.
They are used in many different building types, e.g. shopping
malls, airports, exhibition halls, hospitals, industrial plants, storage
facilities, car parks and pedestrian bridges. It is our passion to
be innovative, to supply perfect quality and to develop solutions
according to customer requirements.
Technology. Innovative from experience.
Competence does not appear by chance. More than 10 million metres
of MIGUA movement joint systems have, over decades, been installed
worldwide to the satisfaction of architects, designers, builders and
owners. We are leaders in technological development in Europe as
witnessed by numerous patents and test certificates.
MIGUA engineers are, on an ongoing basis, designing and developing
new profiles with enhanced characteristics which lead to time and cost
saving installations. Through the use of special materials safety features
are improved and stringent performance tests are conducted on all
new products.
Quality. Made in Germany.
MIGUA products combine optimum solutions with excellence in
design, high quality materials and safety features which are supported
by our standard warranties. Quality makes the pre-condition for
product safety. That is why MIGUA develop and manufacture
in Germany. Only products on the highest standard achieve the
necessary durability and allow required warranties.
Due to this reason MIGUA is able to offer such warranties.
Beyond the technical quality of our products the main target of
the MIGUA quality management is the utmost satisfaction of our
customers. Each operation and work step is described and will be
recorded. From the first idea through research and development up
to successful market launch. Just this makes MIGUA successful.
LOAD CAPACITy FS 110
FATIGUE LOADING
SkID RESISTANCE
LOAD CAPACITy / WATERTIGHTNESS
55
MIGUTransMIGUa
Contact
Solutions. Which work.
By ensuring the technical quality of our products MIGUA can attain
its primary goal of complete customer satisfaction. We understand
the expectations of our customers, and how to exceed them.
This requires a strong commitment for special requests and solutions.
MIGUA is prepared for it – from the beginning. We are always
available for your questions or giving advice to find the solution our
customers need. Our products are supported by a national network
of technical experts, close cooperation with our world-wide partners
and an experienced international export team.
MIGUA offers the perfect solution for your project.
At a glance
56
MIGUTrans FUGENSYSTEME
MIGUA offers a comprehensive product portfolio of expansion joint covers and systems with outstanding features.
Quality. Made in Germany.
Postal address: PO Box 1260 · 42479 WuelfrathHeadquarters: Dieselstr. 20 · 42489 Wuelfrath
Phone +49 2058 774-0 Fax +49 2058 774-48
[email protected] www.migua.com
FUGENSySTEME GMBH & CO. kG
Subj
ect
to t
echn
ical
cha
nge.
11
/201
1 -
5000
GB
MIGUTrans
Heavy duty expansion joint systems
MIGUTan
Watertight expansion joint systems for traffic
MIGUPrEn
Watertight expansion joint systems for roofs
MIGUMaX
Earthquake resistant expansion joint systems
MIGUTEC
Expansion joint profiles
Increasing architectural requirements as well as new construction materials and processes demand optimized expansion joint systems. For this reason, MIGUA is your experienced partner since we offer more than 600 different profiles for a wide range of applications.
Our product range covers 5 application orientated product groups as detailed below. In addition to standard profiles our R&D engineers provide highly sophisticated solutions for special or non-standard applications.
MIGUA provides solutions for extraordinary challenges.