Heavy Duty Sealed Bearing Hinges and Commercial Hardware...Heavy Duty Steel Barrel Hinge 4 Zinc...

Heavy Duty Sealed Bearing Hinges and Commercial Hardware

Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: [email protected]

www.nationwideindustries.com

Contact Customer Service at: [email protected]

For each side of the hinge, you choose: 4Aluminum or Steel material 4Bolt-on or Weld-on application 4Black or Mill (unpainted) finish

** On this type of hinge, the mounting bracket is the weak point (not the bearings). Nationwide Industries steel yoke is 15% thicker than competitive products reviewed.

Hinge Features: 4Each hinge contains 2 sealed roller bearings

(no grease required) 4All hinges slotted for horizontal adjustability 4Rating: 2,500 lbs. per hinge based on factory dynamic

rating of bearings** 4Assembled in the U.S. 4Warranty: Lifetime on components and 5 years on bearings 4Unpainted steel hinges are zinc plated. 4Steel weld-on body fits round or square profiles 4All hinges sold individually but packaged 8/case.

HDBY-ABB-ABB 4Body: Alum, Bolt-on, Blk 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.5 lbs each

HDBY-ABB-AWM 4Body: Alum, Bolt-on, Blk 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 1.4 lbs each

HDBY-ABB-SBB 4Body: Alum, Bolt-on, Blk 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 3.0" 4Gap Max: 3.5" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each

HDBY-ABB-SWM 4Body: Alum, Bolt-on, Blk 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 1.9 lbs each

Body - the portion of the hinge (with bearings) that rotates

Yoke - the bracket portion which holds the body

* Black finish on aluminum and steel is e-coated.

Understanding the Part Number

Material: A = Aluminum S = SteelApplication: B = Bolt-on W = Weld-onFinish: M = Mill B = Black*

Body(Gate)

Yoke(Post)

HDBY-ABB-SWM

Alum Bolt-on Black Steel Weld-on Mill

Heavy Duty Body Yoke

Heavy Duty Sealed Bearing Hinges All Hinges have Horizontal Adjustability of approximately 1/2"


Heavy Duty Sealed Bearing Hinges

HDBY-ABM-ABM 4Body: Alum, Bolt-on, Mill 4 Yoke: Alum, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.5 lbs each

HDBY-ABM-AWM 4Body: Alum, Bolt-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 1.4 lbs each

HDBY-ABM-SBM 4Body: Alum, Bolt-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 3.0" 4Gap Max: 3.5" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each

HDBY-ABM-SWM 4Body: Alum, Bolt-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 1.9 lbs each

HDBY-AWM-ABB 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.4" 4Gap Max: 2.9" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.3 lbs each

HDBY-AWM-ABM 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Mill 4Gap Min: 2.4" 4Gap Max: 2.9" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.2 lbs each

HDBY-AWM-AWM 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.4" 4Gap Max: 2.9" 4Hinge Height: 4.1" 4Weight: 1.1 lbs each

HDBY-AWM-SBB 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.3 lbs each

All Hinges have Horizontal Adjustability of approximately 1/2"

2



HDBY-AWM-SWM 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.5" 4Gap Max: 3.0" 4Hinge Height: 4.1" 4Weight: 1.6 lbs each

HDBY-SBB-ABB 4Body: Steel, Bolt-on, Blk 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.7 lbs each

HDBY-SBB-AWM 4Body: Steel, Bolt-on, Blk 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each

HDBY-SBB-SBB 4Body: Steel, Bolt-on, Blk 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 3.0" 4Gap Max: 3.5" 4Height: 6.5" 4Weight: 3.7 lbs each

HDBY-SBB-SWM 4Body: Steel, Bolt-on, Blk 4 Yoke:Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each

HDBY-SBM-ABM 4Body: Steel, Bolt-on, Mill 4 Yoke: Aluml, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.7 lbs each

HDBY-SBM-AWM 4Body: Steel, Bolt-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each

HDBY-AWM-SBM 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.3 lbs each


3



HDBY-SBM-SBM 4Body: Steel, Bolt-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 3.1" 4Gap Max: 3.5" 4Height: 6.5" 4Weight: 3.7 lbs each

HDBY-SBM-SWM 4Body: Steel, Bolt-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each

HDBY-SWM-ABB 4Body: Steel, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Blk 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.0 lbs each

HDBY-SWM-ABM 4Body: Steel, Weld-on, Mil 4 Yoke: Alum, Bolt-on, Mill 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.0 lbs each

HDBY-SWM-AWM 4Body: Steel, Weld-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4Height: 4.1" 4Weight: 1.8 lbs each

HDBY-SWM-SBB 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Blk 4Body fits round or square profile 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each

HDBY-SWM-SBM 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Body fits round or square profile 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each

HDBY-SWM-SWM 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Body fits round or square profile 4Gap Min: 2.6" 4Gap Max: 3.0" 4Hinge Height: 4.1" 4Weight: 2.3 lbs each


4


Heavy Duty Gate Hinges

Right Hinge

Left Hinge

NW6218 Mill (2")NW6218-BK Black (2")NW6218-25 Mill (2 1/2")

NW6189 4Aluminum 4Beveled corners, designed to be welded 4Brass bushings and heavy duty stainless

steel pin 4No grease required

Heavy Duty Steel Barrel Hinge

4 Zinc plated steel mounting plate. 4 Fits 2"or 2 1/2" size gate frame. 4Ships unassembled (weld block

to gate, then assemble) 4 12 each per case @ 40lbs

4Horizontal adjustability 4Has an aluminum block

for welding 4Acetal bushing 4Stainless steel hinge pin

Heavy Duty Block Hinge for Aluminum Gate

Heavy Duty Estate Gate HingeHeavy Duty Non Self-Closing Aluminum Hinge

NW6215R Black NW6215L Black

4Contains grease fitting 4Steel power coated 4 6 each per case @ 22lbs

NW6229 4 Zinc plated steel 4Sealed ball barrings 4No grease required

Large Heavy Duty Ball Bearing Hinge

4 4" tall 4 8 each per case @ 44lbs

Heavy Duty Estate Gate Hinge with Adjustability

NW6242-B-BK Black Bolt-on (bolts not included) NW6242-W-BK Black Weld-on (Special Order)

4 Fits 2" gate frames and posts 4" or larger 4Aluminum and stainless steel construction 4Great strength, and horizontal adjustability 4 8 each per case @ 28lbs

Rotating Nut DesignNW6318-20 (2") NW6318-20H (2") w/mounting holes NW6318-25 (2 1/2") NW6318-25H (2 1/2) w/mounting holes

2.003.25

1.36

3.25

.74

2.00

1.772.55

4.32

2.00

1.221.47.38

1.38

1.47

2.25

1.501.50

1.50

2.49

.852.01 1.05

max 6.50min 3.25

2.04 4.00

4 18 each per case @ 45lbs

2.672.022.00

.3752.50

4.00.25

1.63

NW216-26 Black NW216-36 Bronze NW216-56 White

4 Post flange: 5"(H) x 3 1/4"(W) x 3 1/4"(D) 4Gate flange: 2 3/8"(H) x 1 5/16"(W) x 2"(D) 4Gate flange will accommodate both 2" and 1" gate frame 4 20 each per case @ 34lbs

5


Commercial Drop Rods 24" NW6270-24BK Black NW6270-24HDG Hot Dip Galvanized 10/Case @ 46lbs

36" NW6270-36BK Black NW6270-36HDG Hot Dip Galvanized 10/Case @ 55lbs

48" NW6270-48BK Black NW6270-48HDG Hot Dip Galvanized 5/Case @ 36lbs

4Heavy duty 1” O.D. drop rod 4 Zinc plated, powder coated steel 4 Through bolt design 4Can be used on vinyl, wood, aluminum

or chain link gates

Flip LatchGreat for Dumpster Use!

NW6169 Black 4Commercial grade 4 Pad-lockable 4 Zinc plate steel with

black powder coated finish 4Stainless steel through-bolts 4 10 per case @ 37lbs

2.49

.50 max 2.75min .75

4.50

3.75 3.75

1.754.50

1.08

.50

Also available in a Pad Lockable version!NW6270L 4Padlocks not included

Latches, Keyless Locks, Drop Rods, Closers

Keystone® Panic LatchReplaces Panic Bar Applications

KPL-P2-BK Black 4Heavy duty commercial design 4Anti-tamper design 4Secure entry with 6 pin 4 Easy exit with large button 4 6 per case @ 18lbs

Meets Egress codes and specs. Check with your local codes to meet requirements.

Patent Pending

Shotgun™ Gate CloserControlled Closing Power to Avoid Gate SlammingSHOTGUN-BK BlackSHOTGUN-SC Satin Chrome

4One SKU closes any gate up to 250 lbs* 4Anti-slam technology 4Adjustable closing speed 4No oil therefore no leaks 4 10 per case @ 67lbs

* Tested on a 6' high, 6' wide gate. Needs a gate stop to stop at 90 degrees

Patented

Double barrel closing power

6

Keyless Locks 4Mechanical Combination Locks -

No electronics 4 Locks fit gate frames 1-3/8" to 2-3/8"

Two Sided Keypad KYPD-2D-BK Black KYPD-2D-SC Satin Chrome

1 Side Keypad & 1 Side Blank KYPD-2B-BK Black KYPD-2B-SC Satin Chrome

CornerStone® The Million Cycle Self-Closing Nylon Hinges

Keystone® Heavy Duty Key-Lockable Latches

Keystone® XeXternal Mount Key-Lockable Latches

AquaLatch®Magnetic Pool Safety Latches

OrnaMAG™Magnetic Metal Latches

V-Notch™Hinges and Latches

Manta™Magnetic Nylon Latches

Trident™Magnetic Gate Safety Latches

ArmorLatch™Magnetic Lever Latches

LockThru™Wood Gate Swing Latches

Nautilus™ Self-ClosingHinges

Shotgun™Gate Closers

GateShare™Multi-Lock Latch

Wood Fence Hardware


Hinges

Latches

Drop Rods

Handles

Accessories


Wood Fence Hardware


Hinges

Latches

Drop Rods

Handles

Accessories


Vinyl Fence & Railing HardwareHinges

LatchesMagnetic Pool Latches

Drop RodsHandlesBraces

Accessories



Vinyl Fence & Railing HardwareHinges

LatchesMagnetic Pool Latches

Drop RodsHandlesBraces

Accessories





HingesLatches

Magnetic Safety Locks Wheels and Trolleys

Cantilever Gate RollersFittings

Chain Link Gate Hardware



HingesLatches

Magnetic Safety Locks Wheels and Trolleys

Cantilever Gate RollersFittings

Chain Link Gate Hardware

Keyless Gate Locks

» Mechanical Combination Locks - No Electronics » Passage Function May Be Set for Exiting Without Code » Easy Code Change » Codes Can be Set with Any Amount of Numbers » Dead Locking Spring Latch » Marine Grade Finish » Slip Clutch Design - No Damage to Lock if Handle

is Pushed Down too Hard » Our Lock Boxes Provide a Perfect Fit » Locks Fit Gate Frames 1-3/8" to 2-3/8" » Locks Never Need Lubrication

KYPD Style

Phone: (813) 988-2628 • Fax (866) 988-3465www.nationwideindustries.com • [email protected]

Two Sided Heavy DutyOrder in Left or Right, Black or Satin ChromeNW-1150DCL-BK LeftNW-1150DCR-BK RightNW-1150DCL-SC LeftNW-1150DCR-SC Right » Special Order » Requires Matching

Lockbox Below

Two Sided KeypadKYPD-2D-BK (Black) KYPD-2D-SC (Satin Chrome)

Two Sided1 Side Keypad/1 Side Blank KYPD-2B-BK (Black) KYPD-2B-SC (Satin Chrome)

Round Knob Styles Available NW-2230DC-BK (Black) or NW-2230DC-SC (Satin Chrome) » Double Sided Combo Locks

with Knobs

NW-2230DC-KO » Same as Above with Key Option

on One Side

One SidedNW-285-P-SC (Satin Chrome) » For use with Panic Bar

Panic BarNW-PB1100-SC (Satin Chrome)

Lock BoxesLockbox2C (Steel)Lockbox2C-AL (Aluminum) » For Use with KYPD Models

Lockbox3 (Steel)Lockbox3-AL (Aluminum) » For Use with NW-1150 Models

LIFETIMEMechanical Warranty

Keyless Gate Locks

» Mechanical Combination Locks - No Electronics » Passage Function May Be Set for Exiting Without Code » Easy Code Change » Codes Can be Set with Any Amount of Numbers » Dead Locking Spring Latch » Marine Grade Finish » Slip Clutch Design - No Damage to Lock if Handle

is Pushed Down too Hard » Our Lock Boxes Provide a Perfect Fit » Locks Fit Gate Frames 1-3/8" to 2-3/8" » Locks Never Need Lubrication

KYPD Style


Two Sided Heavy DutyOrder in Left or Right, Black or Satin ChromeNW-1150DCL-BK LeftNW-1150DCR-BK RightNW-1150DCL-SC LeftNW-1150DCR-SC Right » Special Order » Requires Matching

Lockbox Below

Two Sided KeypadKYPD-2D-BK (Black) KYPD-2D-SC (Satin Chrome)

Two Sided1 Side Keypad/1 Side Blank KYPD-2B-BK (Black) KYPD-2B-SC (Satin Chrome)

Round Knob Styles Available NW-2230DC-BK (Black) or NW-2230DC-SC (Satin Chrome) » Double Sided Combo Locks

with Knobs

NW-2230DC-KO » Same as Above with Key Option

on One Side

One SidedNW-285-P-SC (Satin Chrome) » For use with Panic Bar

Panic BarNW-PB1100-SC (Satin Chrome)

Lock BoxesLockbox2C (Steel)Lockbox2C-AL (Aluminum) » For Use with KYPD Models

Lockbox3 (Steel)Lockbox3-AL (Aluminum) » For Use with NW-1150 Models

LIFETIMEMechanical Warranty

HDBY 05/17

Ask about our other Fence Hardware Catalogs

Wood Fence HardwareVinyl Fence Hardware

Chain Link Gate HardwareKeyless Gate Locks

Controlled Closing Power to Avoid Gate Slamming

Easy to Install &

Cost Effective

Hydraulic Gate Closers

GC4-BK (Powder Coated Steel - Black)GC4-SC (Stainless Steel - Satin Chrome Look)


GC3LD-BK (Powder Coated Steel - Black)GC3LD-SC (Stainless Steel - Satin Chrome Look)

» Hinge Arrangements In-line & Offset

» Maximum Opening of 110°

» GC4 Works with Gates 150-250 lbs. and 44" to 72" wide

» GC3 Works with Gates up to 75-175 lbs. and 40" to 64" wide

» GC3LD Works with Gates up to 50-125 lbs. and 36" to 52" wide

» Hydraulically Controlled Closing Speed

» 4 Tension Setting Options


GC2-BK (Black)

GC2-WH (White)

» Works with Gates up to 125 lbs.

» Works with Gates Widths up to 54"

» Adjustable Closing Speed and Adjustable Latching Speed

» 90° Hold Open Feature


» Powder Coated Steel

GC1-BK (Black)



» Adjustable Closing Speed

» Hold Open Feature


Controlled Closing Power to Avoid Gate Slamming

Easy to Install &

Cost Effective




GC3LD-BK (Powder Coated Steel - Black)GC3LD-SC (Stainless Steel - Satin Chrome Look)

» Hinge Arrangements In-line & Offset


» GC4 Works with Gates 150-250 lbs. and 44" to 72" wide

» GC3 Works with Gates up to 75-175 lbs. and 40" to 64" wide

» GC3LD Works with Gates up to 50-125 lbs. and 36" to 52" wide

» Hydraulically Controlled Closing Speed

» 4 Tension Setting Options


GC2-BK (Black)

GC2-WH (White)



» Adjustable Closing Speed and Adjustable Latching Speed

» 90° Hold Open Feature



GC1-BK (Black)



» Adjustable Closing Speed

» Hold Open Feature



Innovative

Fence and Railing HardwareFor Vinyl, Metal and Wood Systems

HingesLatchesHandlesPost MountsChain Link Accessoriesand more…

Innovative

Fence and Railing HardwareFor Vinyl, Metal and Wood Systems

HingesLatchesHandlesPost MountsChain Link Accessoriesand more…

Innovative Fence and Railing Hardware

© 2017 Nationwide Industries, Inc. All Rights Reserved.Phone: (813) 988-2628 • Fax (866) 988-3465

www.nationwideindustries.com • [email protected]

Date post:	05-Feb-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Heavy Duty Sealed Bearing Hinges and Commercial Hardware...Heavy Duty Steel Barrel Hinge 4 Zinc...

Documents