For over 50 years the name Ruhrpumpen has been synonymous worldwide
with innovation and reliability for pumping technology.
S C ES C EP r o c e s s P u m p
The SCE is a heavy duty, single stage, overhung processpump built in accordance with the Last Edition of API
610.
The SCE is ideally suited for all refinery and petrochemicalplants, oil fields and pipelines, as well as offshore, marineand dock services.
The SCE process pump has a hydraulic range unequaled inthe industry.
Qualified specialists in all departments ensure that thepumps and equipment from our facilities are able to operateunder the most severe conditions.
Intensive research and development ensures that theproducts of Ruhrpumpen are continuously improved tomeet the latest technical requirements.
It is only possible to achieve these aims by means of highlysophisticated CNC controlled machines in our modernmachine shop, supplemented by our test and developmentdepartments as well as the latest industry standardinspection and control procedures. All in our ISO 9001certified facilities.
The application of modern, reliable methods, dataprocessing and sophisticated software with highperformance, state of the art IT offers our customershigh reliability and speed in all working processes,from planning and production to the providing of spareparts.
The instant availability of spare parts, together with firstclass service, ensures customers that they have selectedthe right partner.
100 200 300 400 500 600 700 800 9001000 2000 3000 4000 5000 9000GPM
50
60
70
80
90
100
200
300
400
700
800
FEET
TO
TA
LH
EA
D
FLOW
600
500
900
SELECTION CHART2,4 & 6 POLES 60 HZTYPE SCE
6000 7000 8000
2 POLES
4 POLES
6 POLES
50
S C E
Fully Compliant with API 610, 9th Edition
1 The standard design incorporates special enhancedInpro/ Seal bearing isolators with cooling action.
TM
RF, finish per ANSI B16.5.
The pump casing has centerline support feet integrallycast with the case for equal thermal expansion orcontraction.
The impeller is closed, single suction, statically anddynamically balanced.
Renewable front and back impeller wear rings arestandard.
The gland utilizes four studs to insure a secure fit whenmechanical seals are utilized. All studs used in the sealinggland and bearing bracket covers are ASTM A 193 Gr B7.
The impeller is keyed to the pump shaft and positivelylocked in place by a cap nut.
. The stepped shaftpositively positions impeller and sleeve and permits freeexpansion at high temperatures. Gasketed shaft sleevepositively seals and eliminates leakage under the sleeve.The sleeve extends through the gland.
The seal chamber is larger than API dimensions and willaccept all mechanical seal arrangements.
Standard flanges are 300#
The shaft is designed with a larger diameter and minimumlength to reduce shaft deflection
2
9
3
4
5
7
8
6
Optional cutter screw coke
crusher design
Bearing Configurations
�
�
Deep groove radial andduplex thrust bearings formaximum bearing life.Special bearing arrangement
available for high suctionpressures.
Fan and water cooled
bearing feature
Bearing Lubrication and
Cooling Options
�
�
�
Oil mist and oil purge forcontinuous bearinglubrication.Fan cooling for high ambient
temperatures.Removable water jacket to
insulate radial bearing fromprocess temperature.
�
�
�
�
�
Horizontal, single stage, centerline mounted, back pull-out, radially split, end suction, top discharge, heavy dutycentrifugal process pump.
Designed to meet API 610 pump standards, Last Edition.Options: top suction, top discharge nozzles.
Process Design.Single Stage, Single Suction.
Temperatures from -50°F (-46°C) to 850°F (450°C).Pressures to 667 psi (4600 Kpa).Flows to 9000 gpm (2045 m /h).Petroleum refining, production and distribution.Petrochemical.Heavy-duty chemical.Gas industry services.Utilities.
Note: 1"- 3" discharge nozzles are single volute4" and above are double volute.
3
�
�
�
�
�
�
�
�
P r o d u c t D e s c r i p t i o n
B r o a d A p p l i c a t i o n R a n g e
P e r f o r m a n c e D a t a
Capacity To 9000 U.S. gpm 2045 m /hr.Head To 1100 feet 335 mFlange size 1" to 10" DischargePressure To 667 psig 4600 KPaTemperature -50 F to 850 F -46 C to 450 C
3
° ° ° °
9
3
4
56
7
8
2
9
1
Other Ruhrpumpen Products
API 610Between BearingsRadial Split Single Stage
API 610Between BearingsRadial Split Single Stage
SplitCaseSplitCase
UL/FMFirewater PumpsUL/FMFirewater Pumps
API 610Between BearingsRadial Split Single Stage
API 610Between BearingsRadial Split Single Stage
AxiallySplitAxiallySplit
e-mail: [email protected]
www.ruhrpumpen.com
For more information:
Ruhrpumpen, Inc.
Ruhrpumpen GmbH
Ruhrpumpen, S.A.
4501 South 86th East Ave.Tulsa, Oklahoma 74145 USAPhone: 918-627-8400Fax: 918-624-2471e-mail [email protected]
Stockumer Strasse 28 58453 Witten/GermanyP.O. Box 63 09 58432 Witten/GermanyPhone: (++49) 23 02/661-03Fax: (++49) 23 02/661-3 03e-mail: [email protected]
Níquel No. 9204 Ciudad Industrial Mitras,García, N.L. México 66000Phone: (+52)(81) 8158-5500Fax: (+52)(81) 8158-5501e-mail: [email protected]
A
Company
Specialist for Pumping Technology
D/April/05