Heavy-DutyVertical Balers
E a s y t o u s e
M a i n t e n a n c e f r i e n d l y
B a l e w e i g h t s u p t o 1 , 3 0 0 l b s .
S i d e - m o u n t e d h y d r a u l i c p o w e r u n i t
H E A V Y - D U T Y I N D U S T R I A L B A L E R S
Stationary and self-contained compactors.
By
Front opening control panel eliminates the need for 48" side clearance as required by NEC® standards.
Fixed retainer teeth on the door and rear of the baler reduce
material springback.
For more information or to order, call 1-800-633-8974 or visit us at www.marathonequipment.com.Stationary and self-contained compactors.
By
H E A V Y - D U T Y I N D U S T R I A L B A L E R S
S h o p p i n g P l a z a s
H o s p i t a l s
S u p e r m a r k e t s
H o t e l s / M o t e l s
S c h o o l s
P a p e r C o n v e r t e r s
P a p e r S t o c k D e a l e r s
MRFs/Recycl i ng Cen te rs
R e t a i l e r s
D i s t r i b u t i o n C e n t e r s
M a n u f a c t u r i n g P l a n t s
High-Density Vertical BalersEasy to Use and Maintenance-FriendlyMarathon's Vertical Balers feature many innovations for ease of use and maintenance-friendly
access. Features such as the side-mounted power unit, front facing panel box, and redundant
feed gate interlock system, all add up to a reliable baler for years of trouble-free recycling.
Your baler can also be equipped with optional features that add even more efficiency and
ease of use. An automatic bale ejector that activates when the bale door is opened is available.
The ejector does not extend beyond the wire guides, enabling the unit to be placed against the
wall. Wire guides eliminate the need to go behind the baler for a complete front tie-off system.
The optional Bale-Made light illuminates when a bale is made to notify the operator when it is
time to eject the bale, and a lockable electrical disconnect can be added for local Lock-Out/
Tag-Out.
A redundant interlock system is incorporated into the feed gate switch.
The standard chain bale ejector is manually set after the bale door is opened.
An optional automatic bale ejector is also available. It is actuated when the bale door is opened.
An automatic feed gate opens at the end of each cycle as the platen is retracted.
Platen features replaceable high-density polyethylene guides to absorb side thrust and replaceable cast iron shoes.
Standard controls: key lock On/Off Auto Cycle, Emergency Stop, and Platen Raise/Lower. A Baler Ready light indicates the baler is operational. Also available with “Bale Made” light and electrical disconnect (shown).
If there is an attempt to override the interlocks; the panel box features a programmable "smart" relay control system that disables the baler. The relay add diagnostic and trouble-shooting capabilities.
The side-mounted, self-contained power unit is convenient for maintenance and servicing.
Available Options:Wire Guides and Auto Eject Bale Made Light Lockable Disconnect
Other Available Options:• Bale Made Light
• Electrical Disconnect Switch
• Oil Heater
• Automatic Bale Ejector
• Single-Phase Power Unit
• Front Tie-Off System
For more information or to order, call 1-800-633-8974 or visit us at www.marathonequipment.com.Stationary and self-contained compactors.
By
H E A V Y - D U T Y I N D U S T R I A L B A L E R S
