heightec Training Brochure › app › uploads › heightec-Training... · 2019-04-18 · Height...

heightec.com

with respect to gravity...

®

TM

Training for professional work at height & rescue

The training delivered by the instructor was exceptional. Extremely professional, friendly and knowledgable service. Superb course.

BT

“”

© Front cover image courtesy of Nick Croudace © Front cover image courtesy of Nick Croudace

33hheeightecightecsales line: 01539 728866sales line: 01539 728866


®

TM

Serving the work at height industry

Training for professional work at height & rescue

About heightec........................................................................................04About our Height Safety Centres ............................................................05Our Services ...........................................................................................07Course Content ......................................................................................09Training for Your Industry ....................................................................... 11

Confi ned Space ................................................................................13Construction .....................................................................................15Emergency Services.........................................................................17

Ambulance HART ........................................................................17Fire Service & Industrial Rescue .................................................19Police / Special Operations .........................................................21

Facilities Management ......................................................................23Fall Protection & Supporting Skills ....................................................25Off shore Oil & Gas ............................................................................27Renewable Energy ...........................................................................29Rescue at Height ..............................................................................31Rope Access .....................................................................................33Telecoms / Tall Structures .................................................................35Theatre / Entertainment ....................................................................37

Equipment ..............................................................................................39Work Kits ........................................................................................40Rescue & Evacuation Systems .......................................................41

Height Safety Centres ............................................................................43Training Locations ............................................................................44

Support Services ....................................................................................46Quality Standards ...................................................................................47

Contents

heightec.comMAT

S In

itial

Bas

ic T

ower

Clim

bing

and

Res

cue

- AR

QIV

A G

atew

ay A

ppro

ved

44 hheeightecightec [email protected]@heightec.comsales line: 01539 728866sales line: 01539 728866

heightec provides technical equipment, specialist training and operational support services to height safety and rescue professionals worldwide.

Our Services

• Competence based training for technical work at height and rescue• Specialist equipment for ascent, descent, work positioning, fall arrest and rescue• Expert safety auditing, consultancy, inspection and testing

Single source procurement for the height safety and rescue industry.

Our Clients

We provide equipment and training to all industries who work at height both in the UK and worldwide. Our clients include multi-national corporations, private companies, government departments and small businesses.

We establish long-term relationships with our clients off ering safe, cost-eff ective solutions for contractors, managers and operators.

heightec’s training division, The National Access and Rescue Centre, was established in 1997 with the launch of our fl agship training centre at our head offi ce in Kendal. Kendal has since become the UK’s leading Height Safety Centre for work at height and rescue training.

Over the past 22 years we have established a national network of dedicated Height Safety Centres, with training venues in Aberdeen, Kendal, Leeds, Birmingham, London and Kelvedon.

About heightec

heightec is accredited to ISO 9001 for all of our business activities.

55hheeightecightecsales line: 01539 728866sales line: 01539 [email protected]@heightec.com

Our Height Safety Centres

heightec provides everything needed for technical work at height - off ering a full range of work and rescue equipment, expert advice and operational support services.

We off er an unrivalled series of high quality indoor training environments, with a combined fl oor area of 50,000 square feet and a wide range of specially designed training apparatus replicating realistic work situations.

Being able to guarantee the delivery of a course at any time of year is an important part of our service, without the risk of foul weather interruption and where the learning ability of candidates will not be reduced by being cold or wet.

Our indoor centres are located in Aberdeen, Kendal, Leeds, Birmingham and London. We also have an outdoor facility at Kelvedon which is primarily used to provide height exposure and practical work conditions for London-based courses.

With a network of centres located across the UK, clients are able to choose a venue most convenient to them, minimising downtime and overnight costs.

heightec is an IRATA and GWO approved training provider. Our telecoms courses are MATS Group approved and meet the requirements of the ARQIVA Gateway Scheme.

About our Height Safety Centres

© Image courtesy of Nick Croudace


heightec is the only UK manufacturer of technical fall protection and rescue equipment with a national network of dedicated Height Safety Centres for professional work at height and rescue.

Technical Training

We train thousands of candidates throughout the UK and across the world every year, delivering height safety and rescue courses. Our courses are specifi cally designed to ensure candidates become competent in their respective activity by providing a balanced mix of knowledge and practical skills-based training.

Our dedicated Height Safety Centres comprise the most diverse and comprehensive range of training environments available anywhere.

Our success is underpinned by our exceptional team of highly experienced trainers whose knowledge and expertise is highly valued by our clients.

Specialist Equipment

heightec specialises in the design and manufacture of innovative harnesses, lanyards, descenders, ascenders and rescue products for vertical work at height and rescue.

Our award-winning equipment is designed with the highest margins of safety and tested beyond the requirements of international standards.

heightec products combine exceptional performance with superior strength and durability and are manufactured within the highest levels of quality control. We are pleased to off er expert advice on how to select the most suitable system for your particular application, whatever your industry.

Operational Support Services

In addition, we deliver a comprehensive range of operational support services, including emergency planning, inspection services and bespoke marking services.

Our managed services is delivered by a team of fully qualifi ed staff in line with industry regulatory and legal requirements, in accordance with our ISO 9001 management system.

INNOVATION AWARD

Our Services

Tow

er C

rane

Res

cue


heightec - Setting the Standardheightec was one of the pivotal organisations in the creation of BS 8454 “Code of Practice for delivery of training and education for work at height and rescue”. So, as a prospective training candidate, you can be sure you will receive the course most suited to your needs.

Choosing the Right CourseOur courses are carefully designed to meet the requirements of BS8454 and satisfy third party requirements where applicable. Each course delivers a balanced mix of knowledge, practical skill and experience based training to ensure candidates become competent in their respective activity.

Each course sets out the critical elements of a safe system of work, including; legal requirements, risk assessment, method statements, selection, use and care of appropriate equipment, site safety and emergency procedures.

Industry StandardsOur main practical based courses include the “Introduction to the Use of Fall Protection Equipment ” syllabus approved by the Work at Height Safety Association (WAHSA).

This syllabus has been set by manufacturers of height safety equipment to ensure that safety critical aspects of the use of equipment are addressed. It includes elements of basic knowledge required by any worker, as prepared by the Advisory Committee on Work at Height Training (ACWAHT).

heightec is one of very few training providers to off er this course content.


On Course CompletionCertifi cates and secure photographic ID cards are issued on full completion of courses.

Revalidation ServiceWe operate a reminder service to help companies manage staff revalidations ensuring continuity of certifi cation.

Revalidation courses build upon initial course content, keeping candidates up to date with latest legislation and best practice.

Course Content


We off er a comprehensive range of work at height and vertical rescue training courses to accommodate the requirements of all industries who work at height.

Public courses can be booked online at heightec.com, to arrange a group booking to order please call us.

If you would like advice on which course is right for you, please call us on 01539 728866. We are happy to talk through any questions you may have.

Confi ned Space ........................................................................................ 13Construction ............................................................................................. 15Emergency Services................................................................................. 17 Ambulance HART ............................................................................... 17 Fire Service & Industrial Rescue......................................................... 19 Police / Special Operations ................................................................. 21Facilities Management.............................................................................. 23Fall Protection & Supporting Skills ........................................................... 25Off shore Oil & Gas ................................................................................... 27Renewable Energy ................................................................................... 29Rescue at Height ...................................................................................... 31Rope Access............................................................................................. 33Telecoms / Tall Structures ......................................................................... 35Theatre / Entertainment ............................................................................ 37

Training for Your Industry


Recommended Equipment TCS1

U

TCS2

U

TCS3

U

Rescue Systems:

†RescuePackTM WK32 • •

†ROTOR WTG Rescue System WK41 •

Excellent course, lots of hands-on. I left with the confi dence to put my skills into practice.

Unilever

“

”

Con

fi ned

Spa

ce tr

aini

ng

†Lengths options available - visit heightec.com


Confi ned Space Training

Confi ned Space Entry (Escape BA) 2 TCS1UProvides knowledge and practical competence to allow a person to enter low and medium risk confi ned spaces safely. For persons who do not normally require the use of portable breathing apparatus but may use gas detection monitors and / or portable escape breathing apparatus in emergency situations. Revalidation course - 1 day, TCS1UR

Confi ned Space Entry Awareness for Managers 0.5 TCS2UFor persons who need to understand the requirements for people to enter confi ned spaces which do not normally require the use of portable breathing apparatus but who may use gas detection monitors and / or portable escape sets in emergency situations.

Confi ned Space Entry (WTG - Low Risk Areas) 1 TCS3UFor persons who will enter confi ned spaces in wind turbines which are classed as low risk and do not require the use of portable escape breathing apparatus in emergency situations. Must have an in date and valid GWO Work at Height and Rescue certifi cate.

Inspection of PPE - Competent Person 1 TSK1U

Emergency First Aid at Height EFAW 1 TSK6U

Days Code

Supporting Skillssee p25 for more details

Confi ned Space


Excellent course, well structured with a knowledgeable and enthusiastic trainer. Really concise programme, pitched at the right level. Feedback has been overwhelming and we will continue to progress our association with heightec.

Mount Anvil

“

”

Tow

er C

rane

, Tal

l Str

uctu

re R

escu

e


Recommended Equipment TFP1

U

TFP4

U/5

U

TRE2

U

TRE4

U

TRE9

U

Work Kits:

Roof Work Kit WK04 • •

ROTOR WTG Rescue System WK41 •

†LASER Horizontal Anchor Line LH10 •

Rescue Systems:


RescuePack Pro™ WK35 •

†ROTOR Tower Crane Rescue WK39 •

†ROTOR Evacuation System WK42 •


Work at Height TrainingBasic Harness Fitting & Use 0.5 TFP1UFor persons requiring basic compliance to work at height requirements, gaining knowledge of fi tting and using a fall arrest harness to connect to a suitable anchor point. Useful as a prerequisite to the Rescue After a Fall (TRE2U) or Evacuation by Descent (TRE4U) courses, if the candidate has no work at height certifi cation.

Using Height Safety Equipment 1 TFP4UIncludes harness fi tting and use a range of fall protection equipment, equipment care and maintenance and Work at Height Regulations. Includes the WAHSA approved syllabus “Introduction to personal fall protection equipment”.

Managing Work at Height for Construction 1 TFP4UMFor persons required to manage persons who work at height. Provides education and practical training in the management of personnel and site areas when working at height is required.

Roof Safety, Access & Fall Protection (ARQIVA*) 1 TFP5UFor all persons required to access fl at roofs which off er a suitable working surface. Provides information on potential hazards with discussion of permanent and temporary methods of fall protection. Summary of requirements for the use of mobile elevated work platforms, temporary scaff olds and portable ladders. Includes basic information on radio frequency hazards.

Roof Safety & RF Hazards Revalidation (ARQIVA*) 1 TFP7RFor all persons required to access fl at roofs. Provides information on potential hazards with discussion of permanent and temporary methods of fall protection. Requires in-date Roof Safety certifi cate.

Rescue TrainingRescue after a Fall - Lowering & Lifting 0.5 TRE2USuitable for persons who are already competent to work at height, who may be required to rescue a casualtysuspended on a lanyard after a fall. Includes lowering and raising of a casualty. Course covers all aspects of suspension intolerance.

Evacuation by Descent 0.5 TRE4UFor any person working in a remote location where immediate evacuation may be needed. Practical exercises include use of the equipment from height. You will learn the suitability of various anchor types and the correct positioning for ease of descent.

Tower Crane, Tall Structure Rescue 1 TRE9UIntended for people working with tower cranes who may be required to rescue a casualty from the cab crane structure or a person suspended on a lanyard after a fall. Complies with the requirements of CPA technical information note TIN013 –‘Rescue of Personnel From Height on Tower Cranes’. Annual Refresher course available - 0.5 day, TRE9UR.

Tower Crane Rescue Exercise Assessment 0.5 TRE9UAAssesses competence in the use of fall protection and rescue equipment by means of a team rescue scenario. Candidates will be presented with a rescue exercise and must be able to carry out the rescue with minimal instructor involvement.

Anchor Fixing & Testing 1 TSK3UFor persons required to fi x and test permanent anchors for fall protection purposes. Includes practical experience of fi xing and testing a selection of commercially available eyebolt anchors.

Managing Work at Height 2 TFP2MInspection of PPE - Competent Person 1 TSK1URF Hazards - Awareness and Monitoring (ARQIVA*) 0.5 TSK4UEmergency First Aid at Height EFAW 1 TSK6U


Days Code

*Course includes ARQIVA Gateway approved content.

Construction


I have learnt a great deal on this course. Content was extremely relevant to the role we play in HART. Instructor was friendly and very knowledgeable.

HART

“

”


UH

TTS5

U/6

U

TRE1

U

TRE7

U/A

TRE8

U/S

TCS1

U

Work Kits:

Rigger’s Kit WK11 •

WTG Kit WK13 •

Rope Access - AXON QC WK22 •

Rescue Systems:†RescuePackTM WK32 • • •

†TowerPack™ WK33 • •

RescuePackTM Pro WK35 •

Am

bula

nce

HA

RT

Res

cue

© Image courtesy of Hampshire Fire & Rescue Service †Lengths options available - visit heightec.com


Work at Height Training

Using Height Safety & Rescue Equipment - HART 2 TFP4UH

For persons required to work in exposed locations. Provides training in the use of the specifi c types of personal fall protection and rescue equipment used by ambulance Hazardous Area Response Teams. Course also gives training in the use of the recovery reach pole system together with an explanation of suspension intolerance and the importance of timely rescue. Revalidation course - 1 day, TFP4UHR.

Days Code

Rescue TrainingRescue From Height, Stretcher Lowering 1 TRE1USuitable for all persons who are already competent to work at height. Provides practical experience of lowering stretchers in a variety of situations. Lifelining, hauling and inspection methods are also covered.

RescuePack - User 3 TRE7U

An indispensable course for industrial rescue teams. Introduces candidates to the fundamentals of rescue, allowing them to function eff ectively as part of a team in a diversity of industrial rescue situations. Revalidation course - 1 day, TRE7UR. Advanced course - 2 days, TRE7UA.

Rope Rescue - User - FS Level 4* 5 TRE8UTraining will allow the Rope Rescue User to be fully conversant with all rescue procedures, and be competent in varied techniques for access and fall prevention. Foundation level skills to allow participation in rope rescue operations under the supervision of a higher grade. Revalidation course - 3 days, TRE8UR.

Rope Rescue - Supervisor - FS Level 4* 5 TRE8SAdvanced course giving the skills and knowledge required to eff ectively supervise Rope Rescue operations in a diversity of industrial rescue situations. Some outdoor scenarios are also carried out. Provides the skills and knowledge required to Supervise Rope Rescue operations within a team. Revalidation course - 3 days, TRE8SR.

Additional CoursesWorking at Height & Rescue Training - Wind Turbines 2 TTS5UFor paramedics who have wind turbines in their operational area who could be required to attend a rescue on a wind farm. Course covers a variety of access, safety and rescue techniques and includes registration with GWO. Revalidation course - 1 day, TTS5UR.

Advanced Hub Rescue for Wind Turbines 1 TTS6UFor paramedics who have wind turbines in their operational area who could be required to attend a rescue situation Course covers hub and yaw area rescues. Prior work at height qualifi cations required (TTS5U recommended).

Confi ned Space Entry (Escape BA) 2 TCS1U

Provides knowledge and practical competence to allow a person to enter basic confi ned spaces safely. For persons who do not normally require the use of portable BA’s but may use gas detection monitors and / or portable escape sets in emergency situations. Revalidation course - 1 day, TCS1UR.

Managing Work at Height 2 TFP2M


Supporting Skills see p25 for more details

* hese courses align with Fire Service training levels as defi ned by The Chief Fire Offi cers Association - National Safe Working at Height Group.

Emergency Services - Ambulance HART


An excellent course pitched to the right level. Extremely informative and had an excellent delivery style which was received well by all of us giving additional clarity to the systems of work and equipment that is used.

Bedfordshire Fire & Rescue Service

“

”

†Length options available - visit heightec.com

Recommended Equipment TRE2

U

TRE7

U/A

TRE7

T

TRE8

U/S

Work Kits:

Rope Access - AXON QC WK22 • •

Rescue Systems:

†RescuePackTM WK32 • • •

RescuePack Pro™ WK35 • •

© Image courtesy of Cambridgeshire Fire and Rescue Service


Rescue After a Fall - Lowering & Lifting 0.5 TRE2USuitable for all persons who are already competent to work at height. Includes lowering and raising of a casualty using the RescuePack™ system. This course also covers all aspects of suspension intolerance.

Rope Rescue - User - FS Level 4* 5 TRE8UTraining will allow the Rope Rescue User to be fully conversant with all rescue procedures, and be competent in varied techniques for access and fall prevention. Foundation level skills to allow participation in rope rescue operations under the supervision of a higher grade. Revalidation course - 3 days, TRE8UR.

Rope Rescue - Supervisor - FS Level 4* 5 TRE8S

Advanced course giving the skills and knowledge required to eff ectively supervise Rope Rescue operations in a diversity of industrial rescue situations. Some outdoor scenarios are also carried out. Provides the skills and knowledge required to Supervise Rope Rescue operations within a team. Revalidation course - 3 days, TRE8SR.

Rescue TrainingRescuePack Pro™Provides hands on experience of a full range of industrial rescue skills in realistic environments together with experience of simulated rescue situations.

RescuePack Pro™ User - FS Level 2* 3 TRE7UFoundation course in the use of RescuePack Pro™ industrial rescue system. Provides training in fall protection and basic rescue techniques to allow a team to lifeline a rescuer or raise / lower a rescuer or casualty using a twinline system. Revalidation course - 1 day, TRE7UR.

RescuePack Pro™ User - Advanced - FS Level 2+* 2 TRE7UAAdditional techniques to turn RescuePack Pro™ into a small rope rescue capability. Includes cableways, more pulley systems, releasable deviations, additional rigging techniques and stretchers. Candidates must have completed RescuePack Pro™ User.

Implementation of RescuePack at Brigade levelTo assist fi re and rescue services who are undertaking widespread implementation of this equipment, we off er specialised courses for trainers and internal assessors. These courses are provided complete with learning objectives and guidance on teaching and assessment exercises. Only available to public fi re and rescue services.

RescuePack Pro™ Trainer 2 TRE7TFor fi re service and HART personnel who are required to demonstrate and train others in methods of RescuePack Pro™ operation and supervise the training situation. Provides initial skills for teaching RescuePack Pro™ operations. Candidates must have completed RescuePack Pro™ User. Revalidation course - 2 days, TRE7TR.

Days Code

Emergency Services - Fire Service & Industrial Rescue



*These courses align with Fire Service training levels as defi ned by The Chief Fire Offi cers Association - National Safe Working at Height Group.


Superb instruction, great teaching style. Some diffi cult concepts brought to life very well. An intense 5 day course but the instructor kept the focus very well, thoroughly enjoyable.

MoD

“

”


Recommended Equipment TRA1

U/S

TTS7

U

TTS2

UR

TRE2

U

Work Kits:

Rigger’s Kit WK11 • •


Rescue Systems:



Polic

e Sp

ecia

l Acc

ess


Work at Height & Access Training

Police Rope Access for Search at Height - Operator ** 5 TRA1UIdeal for offi cers needing to use rope access for search operations. Includes the WAHSA approved syllabus “Introduction to personal fall protection equipment”.

Police Rope Access for Search at Height - Supervisor ** 5 TRA1SAdvanced course for offi cers who already have a rope access qualifi cation and signifi cant work experience. Course covers applicable legislation, inspection and care of equipment, casualty care, risk assessments, method statements and site management requirements. Revalidation course - 3 days, TRA1SR.

Police / TSU Special Access (ARQIVA*) 5 TTS7UCourse for operational police and TSU offi cers who need skills to access a variety of structures. Course includes industrial climbing, roof access, rigging and light lifting, RF hazards and rescue. Includes the WAHSA approved syllabus “Introduction to Personal Fall Protection Equipment”.

Police / TSU Special Access Rescue Refresher 1 TTS2URRevalidates and refreshes the rescue element of the Police / TSU Special Access (TTS7U) course.

**Based upon ISO 22846 Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work and Part 2: Code of Practice.

Rescue Training

Rescue after a Fall - Lowering & Lifting 0.5 TRE2USuitable for all persons who are already competent to work at height. Theory and practical sessions including lowering and raising of a casualty. This course also covers all aspects of suspension intolerance.



Confi ned Space Entry (Escape BA) 2 TCS1U

Anchor Fixing and Testing 1 TSK3U


Days Code


Emergency Services - Police / Special Operations


The hands-on sessions were well organised… the content was ambitious for the timescale, but much was learnt by us.

Health & Safety Executive

“

”


U

TFP5

U

TRE2

U

TRA2

Work Kits:




Rescue Systems:





Using Height Safety Equipment 1 TFP4UCourse includes use of fall protection equipment, equipment care and maintenance and Work at Height Regulations. Includes the WAHSA approved syllabus “Introduction to personal fall protection equipment”.


Managing Work at Height 2 TFP2MFor managers, supervisors, clients and specifi ers who are required to create, implement and maintain a safe system for work at height. Includes Introduction to the Use of Personal Fall Protection Equipment (WAHSA), Introduction to Work at Height (code: TFP0) with additional material relating to managing work at height, including inspection requirements for PPE, emergency planning and work restraint methods, work positioning and fall arrest.

Rescue TrainingRescue after a Fall - Lowering & Lifting 0.5 TRE2USuitable for all persons who are already competent to work at height. Theory and practical sessions, including lowering and raising of a casualty. This course also covers all aspects of suspension intolerance.

Rope Access Training

IRATA - Industrial Rope Access Trade Association 5 TRA2_

IRATA certifi cation is suitable for individuals who wish to enter the industry as subcontractors and who will be working in a variety of situations. Courses are available from technician to supervisor level.

IRATA Level 1 - TRA2U | Technician (entry level). IRATA revalidation course - 5 days, TRA2URIRATA Level 2 - TRA2I | Technician (intermediate level). IRATA revalidation course - 5 days, TRA2IRIRATA Level 3 - TRA2S | Supervisor (advanced level). IRATA revalidation course - 5 days, TRA2SR

Trade Specifi c Rope Access (ISO 22846) 5 TRA1_Rope access courses are available from technician to supervisor level and may be tailored to specifi c work environments, e.g. sloping embankments, quarries for geotechnical, glazed surfaces for cleaning. See p33 for more details on all levels and revalidation courses.

User - TRA1U | Revalidation course - 3 days, TRA1URSupervisor - TRA1S | Revalidation course - 3 days, TRA1SR.


RF Hazards - Awareness and Monitoring (ARQIVA*) 0.5 TSK4U




Days Code


Facilities Management


This was by far the best course I’ve been on. Refreshing to fi nd someone training who really knows the industry, what’s actually required and how to implement it in a practical way.

Granada Material Handling Ltd

“

”


U

TFP5

U

TRE2

U

Work Kits:



Rescue Systems:


Usi

ng H

eigh

t Saf

ety

Equi

pmen

t



Supporting Skills

Inspection of PPE - Competent Person 1 TSK1UProvides skills for inspecting PPE for work at height. After the course the candidates will be competent to carry out thorough examinations of equipment and keep traceable records of this under LOLER and Work at Height Regulations.

RF Hazards - Awareness and Monitoring (ARQIVA*) 0.5 TSK4UProvides knowledge on the eff ects of RF on the human body, methods of operating detection equipment and means of identifying danger areas.

Emergency First Aid at Height EFAW 1 TSK6UFirst Aid course for nominated Emergency First Aid at Height (EFAW) individuals or businesses who manage fi rst aid requirements for work sites or offi ces. Covering all skills necessary, ranging from initial survey, administering fi rst aid through to recording accidents in the workplace.


Using Height Safety Equipment 1 TFP4UCourse includes use of fall protection equipment, equipment care and maintenance and Work at Height Regulations. Includes the WAHSA approved syllabus “Introduction to personal fall protection equipment”.


Roof Safety & RF Hazards Revalidation (ARQIVA*) 1 TFP7RFor all persons required to access fl at roofs. Provides information on potential hazards with discussion of permanent and temporary methods of fall protection. Includes knowledge of the eff ects of RF on the human body, methods of operation detection equipment and means of identifying danger areas.

Managing Work at Height 2 TFP2MFor managers, supervisors, clients and specifi ers who are required to create, implement and maintain a safe system for work at height. Includes Introduction to the Use of Personal Fall Protection Equipment (WAHSA), Introduction to Work at Height (code: TFP0) with additional material relating to managing work at height, including inspection requirements for PPE, emergency planning and work restraint methods, work positioning and fall arrest.

Days Code

Fall Protection & Supporting Skills

Rescue Training

Rescue after a Fall - Lowering & Lifting 0.5 TRE2USuitable for all persons who are already competent to work at height. Theory and practical sessions, including lowering and raising of a casualty. This course also covers all aspects of suspension intolerance.

*Course includes ARQIVA Gateway approved content. For more information regarding ARQIVA Gateway scheme, visit www.arqiva.com/documentation/gateway-documents


Thank you for a most enjoyable course, very professionally run. We have all come away with valuable information and a skills pool which we can expand upon. Above all, we thoroughly enjoyed the course.

Shell

“

”

Recommended Equipment TTS2

UN

TRE7

U/U

A

TRA2

Work Kits:



Rescue Systems:

RescuePack Pro™ WK35 •

Off s

hore

IRAT

A R

ope

Acc

ess



Using Height Safety Equipment 1 TFP4UCourse includes use of fall protection equipment, equipment care and maintenance and Work at Height Regulations. Includes the WAHSA approved syllabus. “Introduction to personal fall protection equipment”.

Confi ned Space Entry (Escape BA) 2 TCS1UProvides knowledge and practical competence to allow a person to enter basic confi ned spaces safely. For persons who do not normally require the use of portable BA’s but may use gas detection monitors and / or portable escape sets in emergency situations. Revalidation course - 1 day, TCSIUR

Lattice Tower Climbing & Rescue* 2 TTS2UNFor access to derricks, masts and towers to carry out installation, inspection or servicing on a variety of structures. Includes tower rescue. Revalidation course - 1 day, TTS2UR.

Rescue Training

Industrial Rescue - RescuePack™ User 3 TRE7UFoundation course in the use of RescuePack Pro™ industrial rescue system. Provides training in fall protection and basic rescue techniques to allow a team to lifeline a rescuer or raise / lower a rescuer or casualty using a twinline system. Revalidation course - 1 day, TRE7UR

Industrial Rescue - RescuePack™ User Advanced 2 TRE7UAAdditional techniques to turn RescuePack Pro™ into a small rope rescue capability. Includes cableways, more pulley systems, releasable deviations, additional rigging techniques and stretchers. Candidates must have completed RescuePack Pro™ User.




Days Code


Off shore Oil & Gas

Rope Access Training

IRATA - Industrial Rope Access Trade Association 5 TRA2_

IRATA certifi cation is suitable for individuals who wish to enter the industry as subcontractors and who will be working in a variety of situations. Courses are available from technician to supervisor level.

IRATA Level 1 - TRA2U | Technician (entry level). IRATA revalidation course - 5 days, TRA2URIRATA Level 2 - TRA2I | Technician (intermediate level). IRATA revalidation course - 5 days, TRA2IRIRATA Level 3 - TRA2S | Supervisor (advanced level). IRATA revalidation course - 5 days, TRA2SR

Trade Specifi c Rope Access (ISO 22846) 5 TRA1_Rope access courses are available from technician to supervisor level and may be tailored to specifi c work environments, e.g. sloping embankments, quarries for geotechnical, glazed surfaces for cleaning. See p33 for more details on all levels and revalidation courses.

User - TRA1U | Revalidation course available - 3 days, TRA1URSupervisor - TRA1S | Revalidation course - 3 days, TRA1SR.


Well structured and professionally delivered training course. heightec always set the standard.

Senvion

“

”

GW

O W

orki

ng a

t Hei

ght a

nd R

escu

e Tr

aini

ng -

Win

d Tu

rbin

es


U

TTS6

U

TTS1

2U

TTS1

3U

Work Kits:

WTG Kit WK13 • • •

WTG Kit - International WK16 • • •

Rescue Systems:

ROTOR WTG Rescue System WK41 • • •

†MICRON Evacuation System D33 • • •



Global Wind Organisation Training

GWO Working at Height & Rescue - WTG 2 TTS5UFor access to any area of a WTG where candidates may need to carry out installation, inspection or servicing on a variety of structures and rescue. Revalidation course - 1 day, TTS5UR

GWO First Aid 2 TSK2UGCovers the requirements of the GWO BST First Aid Standard including basic life saving techniques, using a defi brillator (AED) and casualty care training. Contains practical scenarios to assess, stabilise, monitor and then fi nally package a casualty. Revalidation course - 1 day, TSK2UGR

GWO Manual Handling 0.5 TSK5UGCourse provides training to encourage positive manual handling behaviour and perform manual handling activities in a safe manner within the wind turbine industry / environment.

GWO Fire Awareness 0.5 TSK7UProvides knowledge and skills to prevent fi res and conduct initial and appropriate judgement when evaluating a fi re. Covers evacuation of personnel, or if judged to be safe, to effi ciently extinguish an initial fi re by using basic hand held fi re fi ghting equipment.


Confi ned Space Entry (WTG - low risk areas) 1 TCS3UFor persons who will enter confi ned spaces in wind turbines which are classed as low risk and do not require the use of portable escape breathing sets in emergency situations. The use of a gas monitor is covered on the course. Must have a valid GWO work at height certifi cate.

Advanced Hub Rescue for Wind Turbines 1 TTS6UFor all WTG climbers who are required to access and work in the hub (inc. blade) areas of wind turbines.Includes hub and yaw area rescues.

Wind Turbine Lifting Hoist Operations 1 TTS10UCourse is intended for any individual required to operate or assist in a wind turbine lifting hoist operationand covers the requirements and operation of hoists / lifting equipment commonly used.

Wind Turbine Technician Core Skills 5 TTS12UCourse provides the skills and knowledge for persons required to access and work safely at height on WTG’s. Includes GWO working at height and rescue training as well as Advanced Hub Rescue, Emergency First Aid at Work (EFAW) and Wind Turbine Lifting Hoist Operations.

Rescue TrainingRescue Using Micron Descender 0.5 TTS13UFor people working on tall structures who may need to evacuate or rescue another person. Covers use of evacuation equipment in accordance with HSE guidance.

Inspection of PPE - Competent Person 1 TSK1UEmergency First Aid at Height EFAW 1 TSK6U


Days Code

Renewable Energy


Trainers approach the courses with so much enthusiasm and a knowledge unsurpassed; it makes it impossible not to recommend them to other companies or individuals.

National Grid

“

”

Recommended Equipment TRE1

U

TRE2

U

TRE4

U

TRE9

U

TTS1

3U

Rescue Systems:

†RescuePack™ WK32 •


†ROTOR Tower Crane Rescue WK39 • • •

†ROTOR WTG Rescue WK41 • •

†ROTOR Evacuation System WK42 •

†MICRON Evacuation System D33 • •


Hig

h B

ay R

escu

e


Rescue Training

Basic Height Safety & Rescue 1 TRE11UPersons requiring basic knowledge of fall protection systems allowing them to fi t and use a fall arrest harness. Includes lowering and raising of a casualty using the RescuePack™ system.

Rescue After a Fall - Lowering & Lifting 0.5 TRE2USuitable for all persons who are already competent to work at height. Includes lowering and raising of a casualty using the RescuePack™ system. This course also covers all aspects of suspension intolerance.

Tower Crane, Tall Structure Rescue 1 TRE9UIntended for people working with tower cranes who may be required to rescue a casualty from the cab crane structure or a person suspended on a lanyard after a fall. Complies with the requirements of CPA technical information note TIN013 –‘Rescue of Personnel From Height on Tower Cranes’.

Tower Crane Rescue Exercise Assessment 0.5 TRE9UAAssesses competence in the use of fall protection and rescue equipment by means of a team rescue scenario. Candidates will be presented with a rescue exercise and must be able to carry out the rescue with minimal instructor involvement.

Rescue from Height - Stretcher Lowering 1 TRE1USuitable for all persons who are already competent to work at height. Provides practical experience of lowering stretchers in a variety of situations.

Evacuation by Descent 0.5 TRE4UFor any person working in a remote location where immediate evacuation may be needed. Practical exercises include use of the equipment from height. You will learn the suitability of various anchor types and the correct positioning of anchors for ease of descent.

Rescue Using Micron Descender 0.5 TTS13UFor people working on tall structures who may need to evacuate or rescue another person. Covers use of evacuation equipment in accordance with HSE guidance (Operational Circular OC282/31), with respect to the use of descent devices and controlling the rate of descent.

For specialist industry specifi c access and rescue courses, please visit heightec.com/industry



Basic Harness Fitting and Use (p15) 0.5 TFP1U


Days Code

Rescue at Height


Excellent training course. Everything explained in great detail. Never experienced any training like this before.

Finning UK

“

”

Recommended Equipment TRA1

TRA2

TRA4

Work Kits:

Rope Access Kit - AXON QC WK22 • • •

IRAT

A R

ope

Acc

ess


Trade Specifi c Rope Access Training

Suitable for companies who work in a specifi c sector or in defi ned circumstances (e.g. cleaning, geotechnical, lightning protection, comms) and who wish to add a rope access capability to their portfolio.

ISO Rope Access User* 5 TRA1UAn entry-level course giving the basic rope access skills required to work under the supervision of a rope access supervisor. Revalidation course - 3 days, TRA1UR.

ISO Rope Access Supervisor* 5 TRA1SDesigned for candidates with signifi cant experience who wish to develop additional skills to allow them to supervise. Revalidation course - 3 days, TRA1SR.

ISO Rope Access for Tall Structures* 3 TRA4UFor those who wish to use rope access as a method of gaining access tall structures. After completing the course candidates will be able to set up their own suspension system. (TTS2U required - see p35).Revalidation course - 2 days, TRA4UR.

IRATA - Industrial Rope Access Trade AssociationIRATA certifi cation is suitable for individuals who wish to enter the industry and will be working in a variety of situations.

IRATA Level 1 - Technician 5 TRA2UEntry level certifi cation for candidates who wish to enter the industry.

IRATA Level 2 - Technician 5 TRA2IAn intermediate technician is capable of rigging working ropes, undertaking rescues and performing a variety of rope access tasks.

IRATA Level 3 - Supervisor 5 TRA2SAdvanced course allowing supervision of a wide range of work sites.

Reassessment CoursesPlease call for details of Reassessment courses for IRATA Level 1 and 2 Technician and Level 3 Supervisor.


Rope Access Site Awareness 1 TRA9M





Days Code

*Broadly based on ISO 22846 Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work, Part 2: Code of Practice.

Rope Access


A super facility, every aspect of work at height can be demonstrated easily. Great tutors in an excellent location.

National Air Traffi c Service (NATS)

“

”

MAT

S In

itial

Bas

ic T

ower

Clim

bing

and

Res

cue

- AR

QIV

A G

atew

ay A

ppro

ved


U /

3U /

7U

TFP5

U

TFP7

R

TRA4

U

Work Kits:



Rope Access Kit - AXON QC WK22 •

Rescue Systems:

†RescuePack™ WK32 • • • •

†TowerPack™ WK33 • • •



Climbing for Masts & Towers Training

MATS Initial Basic Tower Climbing & Rescue (ARQIVA*) 3 TTS2U

Provides a range of skills for climbing, including pre-use inspection, use of all safety equipment and tower rescue. Revalidation course, 1 day - TTS2UR.

MATS Telecom Climber, Roof & RF Hazards (ARQIVA*) 4 TTS8U

For persons who are starting out in the telecoms Industry and require to access all parts of a typical tower structure and roof area. Includes content on RF Hazards awareness and monitoring.

Industrial Climbing and Rigging (ARQIVA*) 5 TTS7UCourse for candidates working within the telecommunications sector. Including foundation for work at height, climbing, roof safety, RF hazards and light lifting.

Roof Safety, Access & Fall Protection (ARQIVA*) 1 TFP5U

For all persons required to access fl at roofs which off er a suitable working surface. Provides information on potential hazards with discussion of permanent and temporary methods of fall protection. Summary of requirements for the use of mobile elevated work platforms, temporary scaff olds and portable ladders. Includes basic information on radio frequency hazards.

Roof Safety & RF Hazards Reval (ARQIVA*) 1 TFP7RFor all persons required to access fl at roofs. Provides information on potential hazards with discussion of permanent and temporary methods of fall protection. Includes knowledge of the eff ects of RF on the human body, methods of operation detection equipment and means of identifying danger areas.

Rigging & Light Lifting 2 TTS3UFoundation course for the lifting, fi xing and adjusting of light to medium loads up to 100kg. Covering the skills required to raise and lower loads using rope and pulley based equipment.

RF Hazards - Awareness & Monitoring (ARQIVA*) 0.5 TSK4UProvides knowledge on the eff ects of RF on the human body, operation detection equipment and means of identifying danger areas.

Rope Access for Tall Structures 3 TRA4UFor those who wish to use rope access as a method of gaining access to tall structures. After completing the course candidates will be able to set up their own suspension system. (TTS2U required - see above). Revalidation course available - 2 days, TRA4UR.

Use of Portable Abrasive Wheels 0.5 TSK11UFor people who are required to fi t and use abrasive wheels on portable tools (disc grinders). Covers selection and marking of abrasive wheels, pre-use checks, mounting and safe use.

Rescue After a Fall - Lowering and Lifting 0.5 TRE2U




Days Code

*Course includes ARQIVA Gateway approved content. For more information regarding ARQIVA Gateway scheme, visit www.arqiva.com/documentation/gateway-documents

Telecoms / Tall Structures


One of the best equipped practical training areas I’ve seen. Well delivered course answering all questions asked fully!

Ambassador’s Theatre Group

“

”

Wor

k at

Hei

ght i

n th

e En

tert

ainm

ent I

ndus

try



U

TTS9

U

TFP4

UE

TRE2

UE

Work Kits:

Roof Work Kit WK04 •

Rigger’s Kit WK11 • • •

†LASER Horizontal Anchor Line LH10 • •

Rescue Systems:†RescuePack™ WK32 •



Using Height Safety Equipment in Entertainment Industry 1 TFP4UEIncludes use of fall protection equipment, equipment care and maintenance, together with Work at Height Regulations. Includes the WAHSA approved syllabus “Introduction to personal fall protection equipment”.

Work at Height in Entertainment Industry 2 TTS9UProvides a range of skills for accessing and working at height on stage structures including the use of all safety equipment, evacuation and rescue. Revalidation course - 1 day, TTS9UR

Rigging & Light Lifting 2 TTS3UFoundation course for the lifting, fi xing and adjusting of light to medium loads up to 100kg. Covering the skills required to raise and lower loads using rope and pulley based equipment.

Rescue TrainingRescue after a Fall - Entertainment Industry 0.5 TRE2UEDesigned for rescue of fallen gantry workers, including practical experience of simple systems used for rescue after a fall or rescue of a suspended person.



Managing Work at Height 2 TFP2MBasic Harness Fitting and Use (p15) 0.5 TFP1U


Days Code

Theatre / Entertainment


Specialist Height Safety & Rescue Equipmentheightec manufactures a comprehensive range of high quality, fall protection and vertical rescue systems adapted to the requirements of technical industries who work at height.

The quality of our systems is founded on the quality of our individual products.

Each product is designed with a single objective - to improve on what has gone before, without compromise.

Our high specifi cation products excel in their specifi c functions and are safe, strong and easy to use.

Going Beyond the NormWe design products with specifi cations in excess of standards testing requirements.

Some manufacturers regard national and international standards (e.g. EN’s) as the absolute benchmark which their products must meet. This can lead to products being “designed down” to the standard - with specifi cations which only just meet the required level.

This approach does not allow for deterioration and wear, which begins as soon as a product is brought into use. A product that only just meets the requirements of a standard at the time of manufacture could easily deteriorate to below the norm after only a few months use.

Our test regime has included an external exposure test, in which products were continuously subjected to weathering in a very exposed location on the roof of a 35m high building. After 7 years of continuous exposure to sun, wind, ice and rain, no product failed an EN standard test.

For details of our full product range please visit

Equipment

heightec.com


Complete Work Systems

Each work kit is designed to exceed specifi c requirements for all work at height industries.

Every component is carefully selected to make the user’s job easier, more comfortable and effi cient.

The resulting systems are exceptional.

Examples of our work kits:

Roof Work KitFor fl at and sloping roof work

Rigger’s KitFor tower climbing and rigging

Wind Turbine Climber KitClimber’s kit for wind turbine technicians

Rope Access KitWith innovative rope high-specifi cation rope devices and quick connect harness.

Basic Lifting KitLifting kit for hauling including specialist locking pulley.

Advanced Lifting & Lowering KitDesigned to lift small loads (100kg)

Rigger’s Kit

Rope Access Kit

Work Kits


Vertical Rescue... our specialityOur dedication to designing modular rescue systems began nearly two decades ago, with the PHOENIX professional rescue harness. The PHOENIX is one of the most widely used harnesses utilised by fi re brigades, rescue teams, defence fi re and airport fi re services worldwide. It was awarded Millennium Product status by the UK Design Council as an outstanding innovation.

Our rope devices are specially designed for complete control in both lowering and raising operations. We have created new, high strength camming mechanisms for hauling loads and have evolved pulley mechanisms that attach quickly and easily to a loaded rope.

We have a dedicated range of descenders and rescue products specifi cally for use by fi re services and rescue teams.

Examples of our rescue systems:

RescuePack™Rescue of a suspended person

TowerPack™For tower / tall structure rescue

RescuePack Pro™Industrial twin line rescue kit

ROTOR Tower Crane Rescue System Tower crane rescue kit

ROTOR WTG Rescue SystemRescue from most areas of a wind turbine

MICRON Evacuation SystemAdvanced evacuation descender for specialist industries

RescuePack™

RescuePack Pro™

Rescue & Evacuation Systems

For details of our complete range of work and rescue systems visit:

heightec.com


Training Apparatus

Each Height Safety Centre is fully equipped with a comprehensive range of training apparatus to accurately represent the working environments for your specifi c industry.

With a combined fl oor area of 50,000 square feet of purpose built indoor training facilities, we can guarantee the delivery of training no matter what the weather.

Our highly experienced and knowledgeable instructors ensure candidate safety at all times.

Structures include:

• Wind turbine generator simulators with hub, yaw and roof apparatus• Vertical ladders with a variety of fi xed protection systems• Confi ned space gallery with multiple entries, manholes• Confi ned industrial process vessels• Horizontal lattice beam• Suspended lifting beams• Telecoms rigging capability• Telecoms rigging dishes and antennae• Several indoor lattice towers• Interior fl at roofs• Range of exposed walkways and high platforms• Internal scaff olds• Range of internal and external lattice towers• Suspended lighting truss

For more information about structures at specifi c venues please visit heightec.com/training-venues

Height Safety Centres


FREE WIFIFREE WIFI

FREE WIFIFREE WIFI

Birmingham is centrally located for ease of access to companies across the Midlands. The centre contains a wide range of indoor structures suitable for all work at height and rescue industries. This centre is located on the edge of West Bromwich approximately 15 minutes off the M6 jnct 9 and M5 jnct 1.

TransportRoad: From North M6 exit jnct 9 - 5 miles From South M5 exit jnct 1 - 3 milesRail: Dudley Port - 1.5 milesMetro: Black Lane Station - 20 minutes walk Airports: Birmingham International - 22.5 miles

Distances to Birmingham from:Gloucester 57 milesLiverpool 94 milesSheffi eld 99 milesCardiff 116 milesLondon 125 miles

Birmingham - B70 0BW

Our Leeds located Height Safety Centre is based just outside Leeds on the M621 motorway, giving excellent access to the M1 and M62 corridors.

This centre has easy access from all parts of Yorkshire, Lancashire and the North East, as well as the energy hubs along the east coast.

TransportRoad: M621 motorway - exit jnct 1Rail: Leeds Station - 10 minute taxi rideAirports: Leeds Bradford / Manchester / Durham Tees

Distances to Leeds from:Sheffi eld 35 milesManchester 40 milesGrimsby 60 milesNewcastle upon Tyne 100 miles

Leeds - LS12 6DP

heightec’s fl agship centre was launched in 1997 in Kendal, Cumbria. Its location at the southern edge of the Lake District ensures its popularity with our clients across the UK.

Kendal is the largest of our dedicated Height Safety Centres, off ering the full range of height safety, diffi cult access and rescue training courses.

TransportRoad: M6 motorway - exit jnct 36Rail: Main line - Oxenholme StationAirports: Manchester / Leeds Bradford / Durham Tees / Blackpool

Distances to Kendal from:Barrow-in-Furness 35 milesManchester 70 milesLiverpool 75 milesNewcastle upon Tyne 100 milesGlasgow / Edinburgh 145 miles

Kendal - LA9 6NH

The Aberdeen Height Safety Centre serves all height safety sectors but is specially dedicated to the booming energy industries - oil, gas and onshore and off shore renewables.

Located in Westhill, within easy travelling distance of the city centre with good road, rail and airport links for clients in the Borders and eastern Scotland.

TransportRoad: On the A90 - 2 milesRail: Aberdeen mainline - 8 milesAirports: Aberdeen Dyce - 5 miles

Distances to Aberdeen from:Montrose 40 milesDundee 66 milesInverness 99 milesEdinburgh 127 milesGlasgow 146 miles

Aberdeen - AB32 6TQ

Training Locations


FREE WIFI

Our London Height Safety Centre is located at Falcon Park, Neasden, off the A406 North Circular and is purpose designed for key regional industries, such as construction, rope access and entertainment. This centre services central London and surrounding areas, West Midlands, Eastern England, South East and the South West.

Our London Height Safety Centre also utilises our outdoor training site at Kelvedon Hatch.

TransportRoad: End of M1 on A406 north circular - 2 milesRail: Euston, KingsX, PaddingtonTube: Neasden - 2 minutes walkAirports: London City, London Heathrow

Distances to London from:Oxford 50 milesSouthampton 80 milesBristol 120 milesBirmingham 120 milesNottingham 120 miles

Kelvedon Hatch is primarily an outdoor training location with interior teaching rooms, used to provide height exposure and realistic work conditions for London-based courses.

Kelvedon Hatch site is fi tted with transmitting equipment for the training of rigging and lifting.

Interior classrooms are used for theory based work.

TransportRoad: Off M25 jnct 28 on A128 - 11 milesRail: Shenfi eld - 5 miles Ingatestone - 7 milesAirports: London Stansted - 15 miles London Luton, London Heathrow

Distances to Kelvedon Hatch from:London 28 milesCambridge 46 milesGreat Yarmouth 112 milesBirmingham 130 milesNottingham 130 miles

London - NW10 1RZ

Kelvedon Hatch - CM15 0LA

Aberdeen

Leeds

Kendal

Birmingham

LondonKelvedon

All venues have fully equipped classroom and lecture facilities.

Equipment

Candidates are provided with all equipment during the course.

Parking & WiFiFree parking and WiFi is available at all our centres.

Live Online Booking

All our open courses can be booked online at heightec.com/Training

Client Site Training

We off er training at client site both within the UK and overseas. Please call our sales line to discuss your training requirements.

Our Centres


How to orderDetails of our equipment and training courses are available online at heightec.com.

Please contact us if you would like any help or guidance regarding our services.

T 01539 728866E [email protected] heightec.com

Offi ce hours: Monday to Friday - 9am to 5pm.

heightec off ers a comprehensive range of quality controlled support services.

Work at Height Consultancy • Development and review of height safety, emergency planning,

policy and procedures• On site height safety and rescue assessments - onshore and off shore• Height safety audits and inspections • Industry specifi c advice with bespoke training• Equipment test reports

Inspection & ServicingOur inspection service is available for individual items of PPE, work kits or rescue systems and is carried out by our trained inspectors.

Traceability & ID markingOur rope devices are now stamped with a unique ID number at the start of the production process. The resulting mark is more durable than laser etching or engraving and remains legible for longer. The lifespan of the product is increased without the need to re-mark when traceability is essential.

We can indidivudally mark our equipment in accordance with a client’s own ID scheme. Using laser marking for devices, fabric labels on soft goods such as harneses, ropes etc or RFID emitter technology on virtually any item of PPE.

Bespoke BrandingIn addition to our marking and traceability service, we off er clients the option to have their corporate identity or other relevant markings etched onto large orders of devices or heat transferred onto large bag orders. We also off er bespoke helmet branding and soft label marking options for harnesses, lanyards and ropes.

Please visit heightec.com for more information.

Support Services


Quality Standards

Quality Standardsheightec is accredited to ISO 9001 for all business activities.

Some of Our ClientsE.ON, Centrica, Met Offi ce, ARQIVA, Ambassadors Theatre Group, Babcock, Ambulance HART teams, Hampshire Fire Service, Mono Consultants, Off shore Painting Services, RES, Orsted, National Grid, Sir Robert McAlpine, Ventient Energy, BAE Systems, G. E. Energy, B9 Energy, Keltbray, Vattenfall, Vodafone, McLaren Construction, MLL Telecom, ADM Pura Foods, United Nations, John Sisk & Son, Clarke Telecom, Suff olk Fire Service, Senvion, Vestas, CAN, BBC, Scottish Fire Service, ABB, Ofcom, Scottish Ambulance Service, Skanska, UK Broadband Ltd, Delfont Mackintosh, London Fire...

British Standards: “BS 8454 Code of Practice for delivery of training and education for work at height and rescue.”

heightec played an instrumental role in bringing this British Standard into existence, with the aim of setting a standard of excellence for training providers. We provided the Chair for the BSI drafting group and authored the very fi rst document on which the standard was based.

Trademarksheightec, The National Access & Rescue Centre, Height Safety Centre, DUON, DUON-Air, MicroPack, RescuePack, ROTOR, TowerPack and “with respect to gravity...” are all product names and trademarks of The heightec Group Limited.


Specifi cations are subject to change without notice.

© All contents and symbols copyright 2019 The heightec Group Ltd. All rights reserved.

Company No. 03435385Registered in England and Wales. VAT No. 698 1128 04

heightec, Lake District Business Park, Mint Bridge Road, Kendal, Cumbria, LA9 6NH, UK

Rev 12 - April 2019


®

TM

Tel: 01539 728866 Email: [email protected]

heightec.comHeight Safety Centres located in Aberdeen • Kendal • Leeds • Birmingham • London • Kelvedon

Date post:	23-Jun-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

heightec Training Brochure › app › uploads › heightec-Training... · 2019-04-18 · Height...

Documents