Date post: | 17-Nov-2014 |
Category: |
Documents |
Upload: | auricom0011 |
View: | 7,388 times |
Download: | 9 times |
AUTOMOTIVE HEADLAMPS
www.hella.co.nz 113
100mm Halogen Headlamps with Mounting Frame
90mm Halogen FF-H7 Headlamps
1BL 007 834-047 Dipped Beam
1LL 008 369-271 Bi-Xenon H7 Headlamp Unit - LH
1LL 008 369-281 Bi-Xenon H7 Headlamp Unit - RH
1KL 007 834-067 Main Beam
1BL 008 193-017 Dipped Beam
1KO 008 191-027 Main Beam with Park Light
1KO 008 194-027Xenon Dipped Beam with gas discharge and ballast unit
1NL 007 834-057 Fog Lamp
1BL 007 834-037 Xenon Dipped Beam
130
218
150
30
74
ø6.5
ø100
ø124
85 151
85 118.4
DESCRIPTION Built in Headlamps. For buses and mobile homes with 24V operatingVoltage. Xenon or halogen headlamps with arched lens.
LIGHT APERTURE 100mm diameter.
BULBS TO SUIT C 2470.XN 4000.
ECE COMPLIANT E1 548-550.
SPARE PARTS 9GH 145 943-001 Rear Cap for 1KL.9HD 155 239-001 Rear Cap for 1BL, 1NL.
DESCRIPTION Mercedes Benz (E 220 CDI) - E500 W211. With flasher light, electronic headlamp leveller actuator, Xenon ballast, gas discharge bulb and pre-fitted 12V bulbs.
BULBS TO SUIT XN 4000 D2S.CA 1255 H7.W 125 Park.RY 1221 Indicator.
DESCRIPTION Built in Headlamps. H7 Dipped-beam headlamp. Lens with reflector bonded. Headlamp adjusters included.
LIGHT APERTURE 90mm diameter.
BULBS TO SUIT CA 2470.HL 244.XN 4000.
ECE COMPLIANT E1 917.
SPARE PART 9GH 152 654-007 Rear Cap.
BulbsIncl.
BulbsIncl.
Bulb Incl.
Bulb Incl.
24V Bulb Incl.
24V Bulb Incl.
24V Bulb Incl.
24V Bulb Incl.
24V Bulb Incl.
HID
HID
HA071/Hella Cat/Pg 112-113 05/06/2003 1:14 PM Page 113
BULB TO SUIT 12V (C1255).
3-SERIES (E30) 1/83-8/87
1L3 126 898-031 Dipped Beam LH
1L3 126 902-021 Dipped Beam RH
1K3 126 046-001 Main Beam LH
1K3 126 680-001 Main Beam RH
3-SERIES (E30) 9/88-3/97 Super DE
9BG 135 941-011 Dipped Beam LH
9BG 135 942-011 Dipped Beam RH
1K3 134 855-011 Main Beam LH
1K3 134 856-011 Main Beam RH
5-SERIES (E34) 9/88-3/97 Super DE 7-SERIES (E32) 9/88-5/94 Super DE
9BG 135 927-011 Dipped Beam LH
9BG 135 928-011 Dipped Beam RH
1K3 132 253-011 Main Beam LH
1K3 132 266-011 Main Beam RH
114
BMW HEADLAMPSHeadlamps and Inserts
BULBS TO SUIT 12V HB3 (CB1265), 12V HB4 (CC1255), 12V (W125), 12VH1 (C1255).
SPARE PARTS 9ES 145 251-005 Cover lens LH.9ES 145 252-005 Cover lens RH.
BULBS TO SUIT 12V (CA1255), 12V (RY1221).
3-Series (E36) Compact 4/94-8/00
1LJ 007 143-051 FF HB3/HB4 with electric headlamp leveller LH
1LJ 007 143-061 FF HB3/HB4 with electric headlamp leveller RH
1NB 006 270-051 FF H1 Fog Lamp LH
1NB 006 270-061 FF H1 Fog Lamp RH
1LL 008 053-591 DE-H7/FF-H7 with electric headlamp leveller LH
1LL 008 053-601 DE-H7/FF-H7 with electric headlamp leveller RH
5-Series (E39) Saloon 9/00>
BULB TO SUIT 12V (C1255).
5-Series (E34) 1/89-3/97
1NL 005 680-111 DE-H1 Fog Lamp LH
1NL 005 680-121 DE-H1 Fog Lamp RH
12V Bulb Incl.
12V BulbsIncl.
12V BulbsIncl.
12V Bulb Incl.
12V BulbsIncl.
12V BulbsIncl.
HA071/Hella Cat/Pg 114-115 05/06/2003 7:29 AM Page 114
www.hella.co.nz
ATTACHABLE HEADLAMPS - HEADLAMP ASSEMBLIES
115
DESCRIPTION A combination round main headlamp and indicator lamp in one housing.
BULBS TO SUIT 12V (XD1260/55). 12V (RY1221).24V (XD2475/70). 24V (RY2421)
DESCRIPTION Module 120 with H7 dipped-beam light, H3 driving-beam light andside light, with attached amber indicator lamp. Flasher lamp with onelens each toward front and rear. Black housing. Black glass-fibrereinforced lens-retaining rim with extending edge to protect lens.Universal bracket with M12 fixing screws. Type of protection: IPX9K.
SPARE PARTS 1LA 990 185-011 Light Unit.9EL 990 186-001 Lens for indicator lamp, front.9EL 990 186-101 Lens for indicator lamp, rear.
ACCESSORIES 8JD 008 151-051 Socket for AMP plug connector.
BULBS TO SUIT 12V (CA1255). 24V (CA2470).12V (YC1255). 24V (YC2470).12V (R1221). 24V (R2421).12V (HL124). 24V (HL244).
DESCRIPTION For quartz halogen or conventional sealed beams and inserts 178mm.Fully sealed steel cowl, complete with adjusting mechanism for verticaland horizontal alignment, sealing gasket, stainless steel retaining rim and3 pin wiring harness with separate park lamp connection. Ideal for truck,bus or body builders, suits Mercedes, Kenworth, Mack, White etc.
Universal Headlamp Assembly1016
DESCRIPTION Outer chrome rim to suit Part No. 1016.
Chrome Rim1017
DESCRIPTION For all 200 x 142mm rectangular headlamp units.Ideal for truck, bus or body builders.
Rectangular Headlamp Housing1024
1L3 996 160-127 Main Beam / Indicator LH
1L3 996 160-137 Main Beam / Indicator RH
Combination Headlamp / Front Direction Indicator / Front Position Lamp
DESCRIPTION Housing made of black impact and chemical resistant material. Suitable for all 146mm standard headlamp units.
MOUNTING Horizontal and vertical mounting.
BULBS TO SUIT Headlamp: 12V (XD1260/55).24V (XD2475/70).
Front position: 12V (HL124).24V (HL244).
Front direction indicator: 12V (R1221).24V (R2421).
SPARE PARTS 1055 Headlamp insert.9.1001.01 Lens - Indicator.
100112V Bulb
Incl.
1LA 993 975-041 H7/H3 External-Fitting Headlamp RH
1LA 993 975-031 H7/H3 External-Fitting Headlamp LH
1LA 993 975-071 H7/H3 External-Fitting Headlamp LH - 24 Volt
1LA 993 975-081 H7/H3 External-Fitting Headlamp RH - 24 Volt 212 101
165
150
41
91 75
HA071/Hella Cat/Pg 114-115 05/06/2003 7:29 AM Page 115
116
ATTACHABLE HEADLAMPS - HEADLAMP ASSEMBLIESHeadlamps and Inserts
DESCRIPTION For most 165 x 100mm rectangular headlamp units. Chrome platedouter rim. Complete with adjusting mechanisms for vertical / horizontalalignment and wiring loom. Ideal for truck, bus or body builders.
SPARE PART 9.1025.07 Chrome plated outer rim.
Twin Rectangular Headlamp Housing1025
DESCRIPTION With sealing boot. This insert can be used in the high beam section ofa dual headlamp system.
BULBS TO SUIT Headlamp: 12V (C1255). 24V (C2470).
146mm Quartz Halogen Long Range Driving Insert1040
Quartz Halogen High / Low Beam Headlamp Assembly
DESCRIPTION Lamp unit dimensions 270 x 170mm complete with mounting frame andadjusting mechanisms for vertical / horizontal alignment. Fully enclosedhousing with removable rear sealing cap for bulb replacement access. Idealfor truck, bus or body builders.
MOUNTING Simple 4 point mounting.
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Front position: 12V (HL124).24V (HL244).
SPARE PARTS 9.1027.01 Lens.9.1027.02 Reflector.9.1027.03 Lens gasket.9.1027.04 Sealing cap.9.1027.05 Supporting frame.
102712V Bulb
Incl.
352320
190
195 190
410165 70
100 156
QUARTZ HALOGEN HEADLAMP INSERTS
HA071/Hella Cat/Pg 116-117 05/06/2003 7:30 AM Page 116
www.hella.co.nz
QUARTZ HALOGEN HEADLAMP INSERTS
117
DESCRIPTION With sealing boot. This insert can be used in a high beam section of a dual headlamp system.
BULBS TO SUIT Headlamp: 12V (C1255). 24V (C2470).
Note Earth terminal is a “Post” (bullet) type connection.
146mm Quartz Halogen High Beam Insert1053
165 x 100mm Quartz Halogen High Beam Insert
DESCRIPTION With sealing boot.
BULBS TO SUIT Headlamp: 12V (C1255). 24V (C2470).
1041
165 x 100mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With sealing boot.
BULBS TO SUIT Headlamp: 12V (XD1260/55).24V (XD2475/70).
1042
165 x 100mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With front position lamp bulb holder and sealing boot
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Front position: 12V (HL124). 24V (HL244).
1044
200 x 142mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) and sealing boot.
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Front position: 12V (HL124). 24V (HL244).
SPARE PART 13839700 Bulbholder.
1043
HA071/Hella Cat/Pg 116-117 05/06/2003 7:30 AM Page 117
118
QUARTZ HALOGEN HEADLAMP INSERTSHeadlamps and Inserts
DESCRIPTION With front position lamp bulb holder and sealing boot. To suit dual headlamp system.
BULBS TO SUIT Headlamp: 12V (C1255). 24V (C2470).
Front position: 12V (HL124). 24V (HL244).
146mm Quartz Halogen Low Beam Insert1054
178mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With front position lamp aperture and sealing boot.
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Note Front position bulb holder not supplied. Where front position lamp is required, use Part No. 1058.
1056
146mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) andsealing boot. To suit dual headlamp system.
BULBS TO SUIT Headlamp: 12V (XD1260/55).24V (XD2475/70).
Front position: 12V (HL124). 24V (HL244).
1055
178mm Quartz Halogen High / Low Beam Insert
DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) and sealing boot.
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Front position : 12V (HL124).24V (HL244).
1058
HA071/Hella Cat/Pg 118-119 05/06/2003 7:32 AM Page 118
www.hella.co.nz
QUARTZ HALOGEN HEADLAMP CONVERSION KITS
119
178mm Quartz Halogen High / Low Beam Kit
DESCRIPTION High / low beam headlamp inserts with front position lamp aperture and sealing boot.
WATTAGE High beam 60W.Low beam 55W.
SUITS Single headlamp systems.
BULBS TO SUIT Headlamp: 12V (XD1260/55).24V (XD2475/70).
SPARE PART 1056 Headlamp insert.Note Front position bulb HL124 or HL244 and bulb holder not supplied.
Where front position lamp is required, use Part No. 1058.
5604
146mm Quartz Halogen High / Low Beam Kit
DESCRIPTION High / low beam headlamp inserts with front position lamp bulb holder and sealing boot.
WATTAGE High beam 60W.Low beam 55W.
SUITS Dual headlamp systems high / low beam.
BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).
Front position: 12V (HL124).24V (HL244).
SPARE PART 1055 Headlamp insert.
13839700 Bulbholder.
5611
12V Bulb Incl.
12V Bulb Incl.
HA071/Hella Cat/Pg 118-119 05/06/2003 7:32 AM Page 119
120
SEALED BEAMSHeadlamps and Inserts
DESCRIPTION With front position lamp bulb holder and snap lock cable connection.
BULBS TO SUIT Position lamp: 12V (HL124).24V (HL244).
Sealed Beam Adaptor4972
SEALED BEAM ADAPTOR
HALOGEN SEALED BEAMS
Sealed Beams by Dimension
Voltage/ Page TradeWattage Description No. No.
114mm(4 1/2 INCH)
1081 12v 50w FLOOD Q/H 120 H7606
1082 12v 60w FLOOD 122 4466
1084 12v 30w SPOT 122 4405
1085 12v 35w FLOOD 123 4411
1086 12v 35w FOG 123 4415
1087 12v 30w SPOT 123 4416
1089 12v 100w SPOT-L/RANGE 123 4509
1092 24v 60w SPOT 123 13006
1098 12v 40/40w HIGH/LOW 124 4440X
165 x 100mm(6 1/2 x 4 INCH)
1066 12v 60/40w HIGH/LOW 121 4652LH
1067 12v 50w HIGH 121 4651
200 x 142mm(7 3/4 x 5 1/2 INCH)
1068 12v 65/55w HIGH/LOW 121 6052X
Voltage/ Page TradeWattage Description No. No.
146mm(5 3/4 INCH)
1077 12v 50w HIGH 122 5712
1078 12v 60w FLOOD 122 4478
1079 24v 60/40w HIGH/LOW 122 ASD13L
1080 24v 80/60w HIGH/LOW 122 4579
1083 24v 90w SPREAD Q/H 120 H4813
1094 12v 100w L/RANGE 124 4537-2
1096 24v 60w FLOOD 124 4578
1097 12v 35w FLOOD 124 4412
1099 24v 40W HIGH 124 ASD13H
178mm(7 INCH)
1060 24v 75/55w HIGH/LOW 121 4800
3 Contact Lugs
2 Screw Terminals
TRADE PART NO. H7606.
DESCRIPTION Floodlamp beam to suit construction and industrial machinery.
VOLTAGE 12V.
WATTAGE 50W.
114mm Halogen Floodlamp Beam1081
TRADE PART NO. H4813.
DESCRIPTION Driving lamp beam to suit construction and industrial machinery.
VOLTAGE 24V.
WATTAGE 90W (2 x 45W in series).Note Centre pin for location only.
146mm Halogen Driving Beam Lamp1083
HA071/Hella Cat/Pg 120-121 05/06/2003 7:34 AM Page 120
www.hella.co.nz
CONVENTIONAL SEALED BEAMS
121
TRADE PART NO. 4800.
DESCRIPTION High / low beam.
VOLTAGE 24V.
WATTAGE High beam: 75W.Low beam: 55W.
178mm High / Low Beam1060
TRADE PART NO. 4652LH
DESCRIPTION High / low beam to suit dual headlamp systems
VOLTAGE 12V
WATTAGE High beam: 60WLow beam: 40W
165 x 100mm High / Low Beam1066
TRADE PART NO. 4651.
DESCRIPTION High beam to suit dual headlamp systems.
VOLTAGE 12V.
WATTAGE 50W.
165 x 100mm High Beam1067
3 Contact Lugs
2 Contact Lugs
3 Contact Lugs
3 Contact LugsTRADE PART NO. 6052LH, 6052X.
DESCRIPTION High / low beam.
VOLTAGE 12V.
WATTAGE High beam: 65W.Low beam: 55W.
200 x 142mm High / Low Beam1068
HA071/Hella Cat/Pg 120-121 05/06/2003 7:34 AM Page 121
122
CONVENTIONAL SEALED BEAMSHeadlamps and Inserts
TRADE PART NO. 4001, 5001, 5712.
DESCRIPTION High beam to suit dual headlamp systems.
VOLTAGE 12V.
WATTAGE 50W.
146mm High Beam1077
TRADE PART NO. 4478.
DESCRIPTION Floodlamp beam to suit construction and industrial machinery.
VOLTAGE 12V.
WATTAGE 60W.
146mm Floodlamp Beam1078
TRADE PART NO. ASD13L.
DESCRIPTION High / low beam to suit dual headlamp systems on Japanesecommercial vehicles.
VOLTAGE 24V.
WATTAGE High beam: 60W.Low beam: 40W.
146mm High / Low Beam1079
TRADE PART NO. 4579.
DESCRIPTION High / low beam to suit construction and industrial machinery.
VOLTAGE 24V.
WATTAGE High beam: 80W.Low beam: 60W.
Note Not for road use as light pattern is for right-hand side traffic.
146mm High / Low Beam1080
TRADE PART NO. 4466.
DESCRIPTION Floodlamp beam to suit construction and industrial machinery.
VOLTAGE 12V.
WATTAGE 60W.
114mm Floodlamp Beam1082
TRADE PART NO. 4405.
DESCRIPTION Spotlamp beam.
VOLTAGE 12V.
WATTAGE 30W.
114mm Spotlamp Beam1084
2 Contact Lugs
3 Contact Lugs
3 Contact Lugs
2 Contact Lugs
2 Screw Terminals
2 Screw Terminals
HA071/Hella Cat/Pg 122-123 05/06/2003 7:35 AM Page 122
www.hella.co.nz
CONVENTIONAL SEALED BEAMS
123
TRADE PART NO. 4411.
DESCRIPTION Floodlamp beam to suit tractor applications.
VOLTAGE 12V.
WATTAGE 35W.
114mm Floodlamp Beam1085
TRADE PART NO. 4415.
DESCRIPTION Foglamp beam to suit automotive applications.
VOLTAGE 12V.
WATTAGE 35W.
114mm Foglamp Beam1086
TRADE PART NO. 4416.
DESCRIPTION Spotlamp beam to suit handheld spotlamp applications.
VOLTAGE 12V.
WATTAGE 30W.
114mm Spotlamp Beam1087
TRADE PART NO. 4509.
DESCRIPTION Spotlamp beam to suit hand held spotlamp. P/No 1520.
VOLTAGE 12V.
WATTAGE 100W.
114mm Spotlamp / Long Range Beam1089
TRADE PART NO. 13006.
DESCRIPTION Spotlamp beam to suit hand held spotlamp. P/No 1525.
VOLTAGE 24V.
WATTAGE 60W.
114mm Spotlamp Beam1092
2 Screw Terminals
2 Screw Terminals
2 Screw Terminals
2 Screw Terminals
2 Screw Terminals
HA071/Hella Cat/Pg 122-123 05/06/2003 7:35 AM Page 123
124
CONVENTIONAL SEALED BEAMSHeadlamps and Inserts
TRADE PART NO. 4537.
DESCRIPTION Searchlamp work lamp beam.
VOLTAGE 12V.
WATTAGE 100W.
146mm Long Range Beam1094
TRADE PART NO. 4578.
DESCRIPTION Floodlamp beam to suit construction and industrial machinery.
VOLTAGE 24V.
WATTAGE 60W.
146mm Floodlamp Beam1096
TRADE PART NO. 4413.
DESCRIPTION Floodlamp beam to suit construction and industrial machinery.
VOLTAGE 12V.
WATTAGE 35W.
146mm Floodlamp Beam1097
TRADE PART NO. 4440X.
DESCRIPTION High / low beam to suit tractor and automotive applications.
VOLTAGE 12V.
WATTAGE High beam: 40W.Low beam: 40W.
114mm High / Low Beam1098
TRADE PART NO. ASD13H.
DESCRIPTION High beam to suit dual head lamp system on Japanese commercial vehicles.
VOLTAGE 24V.
WATTAGE 55W.
146mm High Beam1099
2 Screw Terminals
3 Contact Lugs
2 Contact Lugs
2 Contact Lugs
2 Screw Terminals
HA071/Hella Cat/Pg 124 05/06/2003 7:37 AM Page 124
HELLA BEAMSETTER
SEG 700L Hella Beamsetter
www.hella.co.nz 197
SPARE PARTS 9EV 861 038-001 Window.9ST 861 074-001 Locking Knob.9XS 854 769-001 Wheel Set.9XS 861 736-001 Rail Kit 1.5 metres.
ALSO AVAILABLE Hella’s Beamsetter calibration service. Designed to calibrate your Beamsetter in line with the manufacturer’s standard and to comply withindustry ISO Certification.
SEG 700DLX Hella Beamsetter
DESCRIPTION An updated version which has new technical advantages that set it apart from other headlight aimers.
FEATURES 1. Digital indication of illuminance.2. Laser alignment.3. Height adjustment lever complete with spirit level for
uneven floors.
SPARE PARTS 8.0002.01 Window.8.0002.03 Voltmeter.8.0002.06 Lightmeter complete with photo-diode.
Calibration Service available fromHella-New Zealand Limited.
The Hella Beamsetter is a precision workshop instrument designed to accurately checkvehicle headlamps. It was developed especially for use in professional workshops and vehicle testing stations.
The Hella Beamsetter provides high accuracy in lighting checks and is also able to test thelatest technology headlamps.
The Beamsetter box, the heart of the unit, is constructed of impact-resistant, corrosionproof plastic which even withstands the aggressive fluids used in workshops.
Its functional design allows quick, precise and simple headlamp adjustment.
FEATURES INCLUDE
• Wide band sight aligner.• Combination volt and light output meter.• Sturdy base.• Large viewing screen.• Easy height adjustment.• Spare parts availability.
SPARE PARTS FOR MARK III BEAMSETTER
1. 2. 3.
HA071/Hella Cat/Pg 196-197 05/06/2003 1:28 PM Page 197