HEMIPLEAT® GOLD CONE®
CARTRIDGE FOR FARR GOLD SERIES COLLECTORS
GOLD CONE TECHNOLOGY
case
it’s anNew Technology Old Technology
GR — Green Our own blend of fibers with a moisture resistant treatment for the best dust release, long filter life and high filtration efficiencies.
FR — Flame Retardant Our own blend of fibers, chemically treated with a fire retardant.
FC - FR Carbon Impregnated Our own blend of fibers, impregnated with carbon for static dissipation and chemically treated with a fire retardant.
SY — Synthetic A lightweight, washable polyester media. HemiPleat EX – Nanofibers are directly applied to the base media for improved efficiency and increased filter life. HemiPleat HE – A synthetic melt blown laminate is applied to the base media for improved initial efficiency out of the box.
MEDIA OPTIONS
HemiPleat eXtreme uses our tested and provenHemiPleat technology and base media with anadditional layer of direct applied nanofibers, for superior efficiency and release. All base medias are available with this technology.
Filters made with HemiPleat eXtreme mediahave an efficiency of 99.995% on particles 0.5μm or larger. HemiPleat eXtreme filters are rated MERV 15.
What it is: A patented, open bottom, pleated conical addition to the inside of a filter cartridge which adds more usable media. This configuration increases the amount of
air each filter can clean.
What it does: Gold Cone technology evenly disperses the reverse pulse air during cleaning cycles, ejecting dust directly into the hopper. The effectiveness of every pulse
along with more media, makes your filters last longer and use less compressed air, saving you money!
Camfil APC | 3505 S. Airport Road, Jonesboro, AR 72401 | 870-933-8048 www.camfilapc.com | e-mail: [email protected] | 800-479-6801
© C
amfil
APC
, Pro
duct
She
et /
Hem
iPle
at G
old
Cone
/02
-25-
-201
6-15
105
— E
xter
nal U
se
What it is: Synthetic beads are applied to our media in order to achieve even and open spacing. The open pleats create topmost utilization of
media area resulting in longer lasting and highly efficient filter cartridges.
What it does: Camfil APC filter cartridges with HemiPleat technology have sizable dust loading capacity and allow for maximum dust release
when pulsed. These industry superior characteristics result in a cleaner, safer and lower maintenance work environment.
AIR POLLUTION CONTROL
HEMIPLEAT TECHNOLOGY
HEMIPLEAT® GOLD CONE® ADVANTAGELAB AND FIELD TESTS CONFIRM HEMIPLEAT® WILL MAKE DUST COLLECTION UNITS WORK MORE EFFICIENTLY.
Camfil APC | 3505 S. Airport Road, Jonesboro, AR 72401 | 870-933-8048 www.camfilapc.com | e-mail: [email protected] | 800-479-6801
LAB TESTED, CUSTOMER APPROVED
Our accelerated lab test demonstrates why HemiPleat filters last
longer. When compared to the leading competitors, HemiPleat
filters maintained the lowest pressure drop, resulting in the least
amount of energy consumption. In-field installations of HemiPleat
filters back up our lab findings. At one such customer’s facility,
identical dust collection systems were experiencing
short filter life with competitor filters. A new set of HemiPleat
filters were installed in one system and one new set of competitor
filters in the other. In this side-by-side comparison, HemiPleat
filters used less energy, less compressed air, maintained a lower
pressure drop, and more than lasted twice as long as
the competition’s.
AIR POLLUTION CONTROL
ACCELERATED LAB TEST REAL-TIME FIELD TEST
HemiPleat and HemiPleat eXtreme filters
LAB & FIELD TEST RESULTS: CAMFIL APC FILTERS HAVE...
• Lower pressure drop
• Better dust release
• Longer filter life
WHAT THIS MEANS TO YOU
• Less energy consumption
• Fewer filter change outs
• Saving you money
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
7
6
5
4
3
2
1
0DIF
FER
EN
TIA
L P
RES
SU
RE (
in w
g)
TIME ELAPSED (hours)
Camfil Competitor 1 Competitor 2 Competitor 3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
7
6
5
4
3
2
1
0S
TATIC
PR
ES
SU
RE I
N I
NC
HES
TIME ELAPSED (months)
Camfil Filter 1 Competitor Filter
Competitor Filter Change Out