Hencon TransVers

Dual Lift

1

HENCON TRANSVERS DUAL LIFT Mobile vehicle for transporting materials in underground mines. Overall design and technical features ensure high maneuverability and reliability of the machine underground in the chemically aggressive environment at temperatures of - 35 °C to +35 °C and relative humidity up to 100%. TransVers Dual Lift complies with international safety standards underground conditions. TransVers Dual Lift is an articulated vehicle with full-time four-wheel drive system. High lifting capacity crane is on the rear frame. • closed operator cabin with dust air filter • two-stage engine air filter • Murphy engine oil-level sight glass instead of dipstick • quick-release couplings for filling of engine and hydraulic oil

Lightweight modification with 2 tons capacity crane

HENCON TRANSVERS DUAL LIFT

ENGINE

Deutz TCD2013 L04 2V

Emission class

EC Step III A and Tier 3

Max power output

126 KW @ 2300 rpm

No. of cylinders 4

TRAVEL PUMPS

Make

Linde

Model

HPV210

Type

Variable displacement axial piston pump

TRAVEL MOTOR

Make

Linde

Model

HMV210

AXLES

Model

Kessler D71

Axle front

Planetary type rigid

mounted

Axle rear

Rigid mounted

BRAKE SYSTEM

Service brake

STEERING

Central steering with dual cylinders Integrated cushion valves Orbitrol valve actuation Hydraulic accumulator Manual override for towing

ELECTRICAL EQUIPMENT

Voltage

24 VDC

Batteries

12 V, 105 A/h

Alternator

100 A

CRANE

Model PALFINGER PK 13500T

Capacity 5800 kg

Max loading moment 13,3 ton-meter

Boom reach 8 m

Max reach capacity 1520 kg

Dual circuit, multi disk wet type on both axles, hydraulically applied

Make

Brevini

Model

BZ3-340

via proportional modulating valve

Emergency brake

Hand operated, spring

applied and hydraulic

release

Operator's cabin The machine has a comfortable three seat cabin with good visibility of the working area. The air ventilation system includes a heater and a windscreen demister function. The cabin is equipped with ROPS / FOPS. The machine has a multi-functional display that allows the operator to see all the machine informa- tion. The driver`s seat has a suspension, a safety belt

HYDRAULIC PUMP DRIVE GEAR

DIMENSIONS AND MANOEUVRABILITY

36

00

DIMENSIONS AND MANOEUVRABILITY

Length 8040 mm Gradient 15° Width 2000 mm Steering angle 50° Height 2700 mm (crane) Unladen weight 10200 kg

Inner turning radius 3700 mm Carrying capacity 8000 kg

Outer turning radius 6500 mm Crane max lifting capacity 5800 kg Ground clearance 335 mm Crane span 10 m

Max speed 25 km/h Tyres 12.00 x 20

4

22

84

60

0

18

84

11

83

27

00