Hencon TransVers

Tanker 10 tons

1

HENCON TRANSVERS TANKER

Mobile vehicle for transporting fuels and lubricants and refuelling motor-vehicles in underground mines. Overall design and technical features ensure high maneuverability and reliability of the machine underground in the chemically aggressive environment at temperatures of - 35 °C to +35 °C and relative humidity up to 100%. TransVers Tanker complies with international safety standards underground conditions.

TransVers Tanker is an articulated vehicle with full-time four-wheel drive system. Tank(s), grease drums and dispensing units are on the rear frame.

• closed operator cabin with dust air filter • two-stage engine air filter • Murphy engine oil-level sight glass instead of dipstick • quick-release couplings for filling of engine and hydraulic oil • autonomous fire suppression system

2

ENGINE

Deutz TCD2013 L06 2V

Emission class

EC Step III A and Tier 3

Max power output

176 KW @ 1900 rpm

No. of cylinders

4

Swept volume

7145 cm³

Max torque

1050 Nm

TRAVEL PUMPS

Make

Linde

Model

HPV210

Type

Variable displacement axial piston pump

Make

Linde

Model

HMV210

STEERING

Central steering with dual cylinders Integrated cushion valves Orbitrol valve actuation Hydraulic accumulator Manual override for towing

ELECTRICAL EQUIPMENT

Voltage

24 VDC

Batteries

12 V, 105 A/h

Alternator

100 A

Diesel fuel tank capacity

7 m 3

Grease

4 drums 0,75 m3 each

Tanker throughput

130 liters/min

Oil filling

130 liters/min

Dispensing hoses

1 x 18 m and 4 x 15 m

Fuel tank

AXLES

Model

240 liters

A closed circuit design, an ideal solution for a long and trouble free lifetime. Dual speed range hydrostatic drive

between axles emulatuion. Each drive axle has its separate drive circuit: one hydraulic motor and one pump.

Make

Brevini

Model

BZ3-340

Kessler D81

Axle front

Driving axle, equalizing beam suspension with rubber springing elements, planetary type.

Axle rear

Driving axle, planetary type rigid mounted

Service brake

Dual circuit, multi disk wet type on both axles, hydraulically applied via proportional modulating valve

Emergency brake

Hand operated, spring

applied and hydraulic

release

Operator's cabin The machine has a comfortable three seat cabin with good visibility of the working area. The air ventilation system includes a heater and a windscreen demister function. The cabin is equipped with ROPS / FOPS. The machine has a multi-functional display that allows the operator to see all the machine informa- tion. The driver`s seat has a suspension, a safety belt

Refuelling equipment Fuel transport and filling station is mounted on the vehicle rear frame. It includes a diesel tank and two grease drums. Fuel tank is equipped with fuel level and water sensor. Fuel level can be controlled by sight glasses, level indicators and dipstick gauge fitted at the top of the tank. Fuel filling systems consists of 24V electric fuel pump and resettable memory flow meters; oil filling system includes pneumatic pump mounted on the oil and grease tanks. Engine driven onboard compressor powers the oil pump and is used for tyre charging.

TECHNICAL PARAMETERS

FUNCTIONAL PARAMETERS

BRAKE SYSTEM

TRAVEL MOTOR

HYDRAULIC PUMP DRIVE GEAR

HYDROSTATIC DRIVE SYSTEM

DIMENSIONS AND MANOEUVRABILITY

Length 9760 mm Max speed 25 km/h Width 2340 mm Gradient 15° Height 2400 mm Steering angle 50°

Turning radius inner 3200 mm Operating weight 19000 kg

Turning radius outer 6400 mm Capacity 10000 kg

Ground clearance 500 mm Tyres 14.00 x 24

4