HE
ND
ER
SO
Nstraight sliding top hung systems
ISSU
E 1-
0314
B20
SlipperFor sliding cupboard doors. Max 9kg.appliCation
• For fitted bathroom and kitchen furniture of all kinds, such as serving hatches, cupboards and other items made from lightweight wood or chipboard• For timber, timber framed or composite doors• Silent – nylon slides on attractive aluminium track• Easily top fixed• Simple to remove doors for cleaning and decorating
door SpeCiFiCation
track System Slipper
For Individual Doors:Max Door Weight 9kgMax Door Width 900mmDoor Thickness 16-30mmMax Door Height 1800mm
Standard SetS and paCK
Sets comprise of 2 top aluminium section tracks, 4 nylon sliders, 3 guides, safety stop, 2 flushpulls, all screws and fitting instructions.
Set no. opening width track length hardware for
HSS4 1200mm 1200mm 2 doorsHSS5 1500mm 1500mm 2 doorsHSS6 1800mm 1800mm 2 doors
pack no. application
HSS1 Single door fittings pack
hhardWare SpeCiFiCation
track H130 Aluminium (900, 1200, 1500, 1800, 2400 & 3600mm lengths)
Slider H131 White nylonSliders are molded with radiused sides for ease of installation and for a smooth sliding action.
door Stop H28P Rubber-buffered stop
guides H132 White nylon saw cut guideGuides can be positioned on both sides of the door or slide in a sawcut in the centre line of the door.
accessoriesFlush Pull H26P
H132 - Guide
H26P - Flush Pull
H131 - Hanger
H28P - Door Stop
H130 - Track
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
ISSU
E 1-
0314
B20B
3
13
19
30 MAX16 MIN
16 MIN.30 MAX.
13
19
Door Height = height of opening less 16mm
3
H130 Track
H131 Slider
H28P Door Stop
H132 Nylon Guide
NOT TO SCALE
HE
ND
ER
SO
Nstraight sliding top hung systems
appliCation
• Forbuilt-infurniture,i.e.wardrobesandcupboardsinresidentialapplications • Easilyadjusteddoorheight•Alternativeguidechannelsystemsavailable
door SpeCiFiCation
track System double top lite
For Individual Doors: Max Door Weight 27kg Door Thickness 16-38mm
Lightly framed timber doors or doors made from medium density fibreboard (MDF) must have provision for hangers to be screwed securely to the back face of the doors.
Standard SetS and paCKS
Sets comprise top track, hangers, door stop(s), saw cut guide(s), all screws and fitting instructions.
Set no. opening width track length hardware for
HLW12 1200mm 1200mm 2 doorsHLW15 1500mm 1500mm 2 doorsHLW18 1800mm 1800mm 2 doorsHLW24 2400mm 2400mm 3 doors
pack no. application
HLW01 1 door pack
douBle top liteFor top hung sliding wardrobe doors. Max 27kg each.
HLW220 Hanger – with white wheel
HLW221 Hanger – with coloured wheel
H28P - Door Stop
H101N – Guide included in sets and packs
HLWDA - Track HLWA - Track
ISSU
E 1-
0314
B30
hardWare SpeCiFiCation
track HLWDA Aluminium (1200, 1500, 1800, 2400 & 4800mm lengths)
hangers (2 per door)
HLW220 Outer offset hangerHLW221 Inner offset hangerHLW222 Reversible offset hanger
door Stop H28P Rubber-buffered stop
guides H101N Nylon saw cut guide
accessoriesSingle track HLWA Aluminium
(1200, 1500, 1800, 2400 & 4800mm lengths)
Guides H24/25 AdjustablenylonguideH106SL/94 Spring loaded guide (suits H81X channel & H94FM channel)H113/81X Nylon guide (suits H81X channel)
Channels For heavy duty applications or where more than 3 doors are required per openingH81X Aluminium channel
(1200, 1500, 1800, 2400 & 3600mm lengths)H94FM Aluminium channel
(2000, 3000, 4000 & 6000mm lengths)
HLW222 Hanger – reversible with
white wheel
H113/81X - Guide and H81X - Channel
H106SL/94 - Guide
H24/25 - Guide
H94FM - Channel
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
ISSU
E 1-
0314
B30B
double top lite – 2 door application
Finger Pull
H28P Door Stop H28P Door Stop H28P Door Stop
H101N Guides
H101N Guides
INSIDE
double top lite – 3 door application
INSIDE
NOT TO SCALE
Lock Nut and Washer
HLW222 Reversible HangerEnables doors to be fitted either on the front or rear line of track(Included in HLW24 set and in Fitting Pack HLW01)
Alternative H24/25 AdjustableNylonGuide (Not supplied with kit)
H28P Door Stop
Alternative H113/81X
Nylon Guide(Not supplied
with kit)
H81X Channel
3 MIN.
8
5
20
4937
2840
10
Alternative H106SL/94
Spring Loaded Guide (Not
supplied with kit)
H94FM Channel
H101N Guide
19 MIN.38 MAX. 16 MIN.
19 MAX.16 MIN.19 MAX.
19 MIN.38 MAX.
Removable Fascia
Removable Fascia
HLW220 Hanger
HLW221 Hanger
HLW221 HangerHLW220 Hanger
HLW221 Hanger HLWDA Track
HLWDA Track
HLWDA Track HLWA Track
16 - 30
* For options and further information on door thickness and three hanger layouts, please contact our technical sales team.
HE
ND
ER
SO
Nstraight sliding top hung systemsSWiFt
For top hung sliding doors. Max 30kg each.
appliCation
• Idealforresidentialinteriortophungslidingdoors• Suitableforasingledoororfortwodoorsonabi-partinginstallation-doorwidth limits apply• Thetrackissidewallfittedwithprovisionfora‘hook-on’pelmet• Allscrewsarethesamesizeandlengthforquickselectionandeasyinstallation
door SpeCiFiCation
track System Swift
For Individual Doors:Max Door Weight 30kgMax Door Width 1500mmMin Door Thickness 25mm
Suitable for use with lightly constructed timber framed doors of flush or panelled construction. Provision must be made for fitting the hangers securely, since the hangers strike the door stops.
Standard SetS and paCK
Sets comprise of top track, 2x hangers, 2x door stops, H101N and H162 guides, all screws and installation instructions.
Set no. max door width hardware for track length
HS16 900mm 1 door 1600mmHS24 1500mm 1 door 2440mm
pack no.
HS1 The S1 is a pack of fittings only, without track, for use with one S24 set for bi-parting doors, each 720mm maximum width.
h
H101N - Guide (supplied in sets and fitting packs)
H162 Guide (supplied in sets and
fitting packs)
H30DS - Door Stop H30HDP - Hanger
H30EC - End Cap – left hand
H30PEL - Pelmet
B40
hardWare SpeCiFiCation
track H30A Aluminium (1600 & 2440mm lengths)Trackincludesrecessfor‘hook-on’pelmet.
hangers (2 per door)
H30HDP Steel hanger with nylon wheel
door Stop H30DS Rubber buffered stop
guides H101N Nylon saw cut guideH162 Adjustablefloorguide.
accessoriesPelmet and End Caps
H30PEL Pelmetinpearlwhiteonzinccoatedsteel.Hooks onto track, no screws required. Supplied with End Caps made from high impact polypropylene. The end caps are a push-fit onto the pelmet. Pelmet length: 1800mm.
H30A - Track
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B40B
H30A - Track
H30HDP - Hanger
46 MIN 59 MAX
Door Height
8
H30PEL - Pelmet (optional)
H101N - Guide
57
32
73
5
20
5
20 MIN35 MAX
H162 Guide
25 MIN 35 MAX
5
NOT TO SCALE
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B50
SprintFor top hung sliding doors. Max 30kg.appliCation
• For entrance doors and doors between rooms• For timber, timber framed or composite doors• Silent – nylon guides and hangers on aluminium track• Floor component – guide only
door SpeCiFiCation
track System Senator
For Individual Doors:Max Door Weight 30kgMax Door Width 900mm or 1525mmDoor Thickness 20-35mmMax Door Height 2400mm
Standard SetS and paCK
Setscompriseofjump-proof,face/soffitfixingaluminiumsectiontrack,topfixinghangers,H162 guide, stop, all screws and fitting instructions.
Set no. opening width hardware for track length
HSP3 900mm 1 door 1800mmHSP5 1525mm 1 door 3000mm
pack no. application
HSENSP1 One door fitting kit
h
771092 & 738516
A
A4----
40P & EC40P
185460
2344
21
13
10 6
83
H40P/1854 - Pelmet
hardWare SpeCiFiCation
track H21A Aluminium (3000mm length)
hangers (2 per door)
H161 Senator hangerTop fixing hangers with ball race nylon tyred wheels for smooth operation. Built in adjustability for ease of installation
door Stop H28P Rubber buffered stop
guides H101N Nylon cut saw guideH162 Adjustablefloorguide
accessoriesPelmet H40P/1854DP Pelmetinwhiteonzinccoatedsteel.
Face fixes to wall. Supplied with screw on End Caps. Pelmet length: 1854mm.
H162 Guide (supplied in sets and fitting packs)
H21A - Track
H28P - Door Stop
H101N – Guide
H161 - Hanger
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N20 MIN35 MAX
5
48 MIN66 MAX
B50B
20 MIN.35 MAX.
48 MIN.66 MAX.
5
H21A Track
H161 Hanger
H28P Door Stop
H162 Guide
NOT TO SCALE
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B60
Single topFor single track sliding wardrobe doors. Max 45kg.appliCation
• For timber framed composite doors• Silent – nylon wheeled ball bearing hangers and aluminium track• Easilyadjusteddoorheight• Alternative guide channel systems available
door SpeCiFiCation
track System Single top
For Individual Doors:Max Door Weight 45kgMax Door Width 900mmDoor Thickness 16-40mmMax Door Height 2400mm
Standard SetS and paCK
Setscompriseofjump-proof,face/soffitfixingaluminiumsectiontrack,ballbearinghangers,nylon guides, rubber-buffered stop, all screws and fitting instructions.
Set no. opening width track length hardware for
HST12 600mm 1200mm 1 doorHST15 750mm 1500mm 1 doorHST18 900mm 1800mm 1 door
pack no. application
HST01 Single door fittings pack
hhardWare SpeCiFiCation
track H21A Aluminium (3000mm length)
hangers (2 per door)
H220 Outer offset hangerNylon tyred wheel face fitted to the back of the door.
door Stop H28P Rubber-buffered stop
guides H24/25 NylonadjustableguidesetIncluded in sets and packs. Alternative guides available.
accessoriesGuides H101N Nylon saw cut guide
H106SL/94 Spring loaded guide (suits H81X channel & H94FM channel)H113/81X Nylon guide (suits H81X channel)
Channels H81X Aluminium channel (1200, 1500, 1800, 2400 & 3600mm lengths)
H94FM Aluminium channel(2000, 3000, 4000 & 6000mm lengths)
Pelmet HF134/# Fascia for soffit fixed applications for doors up to 38mm thick HF134/ECP Fascia end cap packHF138/# Fascia for soffit fixed applications for doors up to 20mm thick HF138/ECP Fascia end cap packNote: Replace # with 2000, 3000 & 4000mm lengths. All fascia anodised finish
H21A - Track
HF134 - Fascia HF138 - Fascia
H220 Hanger H28P - Door Stop
H113/81X - Guide and H81X - Channel
H106SL/94 - GuideH101N – Guide
H24/25 - Guide
H81X - Channel H94FM - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B60B
16 MIN40 MAX
8
5
20
16 MIN.40 MAX.
(38 MAX. with H134 Fascia)
(20 MAX. with H138
Fascia)
44 MIN.52 MAX.
20
5
8
HF134 Fascia HF138 Fascia
H220 Hanger H220 Hanger
H24/25 Adjustable
Nylon Guide
H21A Track H21A Track
H101NSaw Cut Guide
H113/81X Nylon Guide
H81X Channel
NOT TO SCALE
3 MIN.
16 - 30
H106SL/94 Spring loaded Guide
H94FM Channel
16 - 30
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B70
douBle topFor double track sliding wardrobe doors. Max 45kg.appliCation
• For heavy duty applications – larger wardrobes and cupboards in hotels, schools and offices• For timber, timber framed or composite doors• Silent – nylon wheeled ball bearing hangers and aluminium track• Easilyadjusteddoorheight• Alternative guide channel systems available
door SpeCiFiCation
track System double top
For Individual Doors:Max Door Weight 45kgMax Door Width 900mmDoor Thickness 16-40mmMax Door Height 2400mm
Standard SetS and paCK
Setscompriseofjump-proof,face/soffitfixingaluminiumsectiontrack,ballbearinghangers, nylon guides, rubber-buffered stop, all screws and fitting instructions.
Set no. opening width track length hardware for
HW12 1200mm 1200mm 2 doorsHW15 1500mm 1500mm 2 doorsHW18 1800mm 1800mm 2 doorsHW24 2400mm 2400mm 3 doors
pack no. application
HW01 Single door fittings packHW02 Two door fittings pack
hardWare SpeCiFiCation
track H20A Aluminium (3000mm length)
hangers (2 per door)
H220 Outer offset hangerH221 Inner offset hangerH222 Reversible offset hanger
door Stop H28P Rubber-buffered stop
guides H24/25 Nylonadjustableguideset1 guide set for 2 doors, 2 sets for 3 doors. Included in door sets and packs. Alternative guides available.
accessoriesTrack H21A Aluminium single track (3000mm length)
Guides H101N Nylon saw cut guideH106SL/94 Spring loaded guide (suits H81X channel & H94FM channel)H113/81X Nylon guide (suits H81X channel)
Channels For heavy duty applications or where more than 3 doors are required per openingH81X Aluminium channel
(1200, 1500, 1800, 2400 & 3600mm lengths)H94FM Aluminium channel
(2000, 3000, 4000 & 6000mm lengths)
Pelmet HF134/# Fascia for soffit fixed applications for doors up to 38mm thick HF134/ECP Fascia end cap packHF138/# Fascia for soffit fixed applications for doors up to 20mm thick HF138/ECP Fascia end cap packNote: Replace # with 2000, 3000, 4000mm lengths. All fascia anodised finish
H20A - Track
HF134 - Fascia HF138 - Fascia
H220 Hanger H221 Hanger H222 Hanger
H28P - Door Stop
H113/81X - Guide and H81X - Channel
H106SL/94 - Guide
H24/25 - Guide Set
H81X - Channel H94FM - Channel
H101N - Guide
H21A - Track
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
double top – 2 door application
Finger Pull
H28P Door Stop H28P Door Stop H28P Door Stop
H101N Guides
H101N Guides
INSIDE
double top – 3 door application
INSIDE
25 MIN40 MAX
44 MIN52 MAX
16 MIN24 MAX
44 MIN52 MAX
B70B
44 to 52 44 to 52
25 MIN.40 MAX.
25 MIN.40 MAX.
25 MIN.40 MAX.
25 MIN.40 MAX.
(38 MAX.with HF134
Fascia)
(20 MAX.with HF138
Fascia)
16 MIN.24 MAX.
HF134 Fascia HF138 Fascia
H220 Hanger
42
H220 Hanger
H221 HangerH221 Hanger
H221 Hanger
H20A Track
H20A Track H21A Track
H20A Track
H24/25 Adjustable
Nylon Guide
H28P Door Stop
H113/81X Nylon Guide
H81X Channel
NOT TO SCALE
3 MIN.
H106SL/94Spring Loaded
Guide
H94FM Channel
16 - 30
30
8
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B80
marathon 55 & 90For sliding doors. Max 55kg or 90kg.appliCation
• Used for heavy-duty domestic and light commercial applications, doors and partitions• For timber, timber framed or composite doors• Easilyadjusteddoorheight• Simultaneous action option• Fire door kit option available for Marathon 90
door SpeCiFiCation
track System marathon 55 marathon 90For Individual Doors:Max Door Weight 55kg 90kgMax Door Width 1500mm 1500mmDoor Thickness 32-50mm 32-50mmMax Door Height 3000mm 3000mm
Standard SetS and paCK
Sets comprise of top assembly, nylon top plates, floor guide, nylon, channel, wall mounted stop, all screws and fitting instructions.
marathon 55 marathon 90Set no. Set no. door width track length hardware for
HJ2 HS2 400-750mm 1219mm 1 door HJ3 HS3 750-900mm 1473mm 1 doorHJ4 HS4 900-1050mm 1702mm 1 doorHJ5 HS5 1050-1200mm 1981mm 1 doorHJ6 HS6 1200-1500mm 2438mm 1 door
h
771092 & 738516
A
A4----
40P & EC40P
185460
234421
13
106
83
H40P/1854 - Pelmet
H102N/93 - Guide
H3/40 - Bracket
H43 - Top plate
H44 - Wall Mounted Stop
hardWare SpeCiFiCation
top plate (2 per door)
H43 Nylon top plate with integral buffer
Stop H44 Wall mounted stop
guides H101N Nylon saw cut guideH102N/93 Floor mounted channel guide
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths)
accessoriesSelf closing kit HSCK1 For doors up to 60kg
Pelmet H40P/1854 Galvanised fascia for face fixed applications (HJ3 and HS3 sets only)
HEC40P Galvanised fascia end cap packH40P/1854P Artic white fascia for face fixed applications
(HJ3 and HS3 sets only)HEC40PW Artic white fascia end cap pack
Bracket H3/40 Soffit fix brackets (pack of 5)
Fire door kit HFDK1 Selfclosingfiredoorkit.ForuseinconjunctionwithMarathonkits S3, S4, S5 & S6 (purchased separately)
HFDK2 Non-selfclosingfiredoorkit.ForuseinconjunctionwithMarathon kits S3, S4, S5 & S6 (purchased separately)
Simultaneous Action Kit
H23 For biparting doors up to 60kg
Marathon Sliding Door System
H101N - Guide
17
20
16
15
H93 - Channel ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B80B
32 MIN50 MAX
32 MIN50 MAX
32 MIN50 MAX
32 MIN50 MAX
H93S Channel
H93S Channel16
16 H102N/93 Guide
H102N/93 Guide
32 MIN 50 MAX
32 MIN 50 MAX
65 MIN 75 MAX
70 MIN 80 MAX
H43 Top Plate
H3/40 Bracket
H44 Wall Mounted Stop
H43 Top Plate
HJ or HS Marathon Track Set
H40P/1854 Pelmet
HJ or HS Marathon Track Set
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B100
SiroCCo SelF CloSing SyStemFor sliding timber and metal doors. Max. 80kg.appliCation
• Suitable for both domestic and commercial interior applications • Designedtogiveasmoothandquietoperation,withahydraulicallycontrolledsoft close feature• Adjustableclosingspeedfeature• Door brake to reduce opening speed to prevent damage to the door and system• Operational between temperature ranges of -10°C to 40°C• Optionalholdopenunitgivingadjustabletimedelaybeforeselfclosing
door SpeCiFiCation
track System SiroccoFor Individual Doors:Max Door Weight 80kgMin Door Width 800mmMax Door Width 1200mmDoor Thickness 30-46mm
Standard SetS and paCK
Sets comprises of aluminium track (2200mm), hangers, hydraulic control unit, power spring unit, door stops, guides, roller, all screws and fitting instructions.
pack no. application
HSIRRH Right Hand OpeningHSIRLH Left Hand OpeningHDELRH Delayed Closing Timer – Right HandHDELLH Delayed Closing Timer – Left Hand
hardWare SpeCiFiCation hardWare SpeCiFiCation
guides H102SS/94 Timber doors - wall mounted and multiple run guideH105SS/94 Timber doors - face mounted guideH106SS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessories
Sirocco Guide
Sirocco Self Closing System
H94 - Channel
H106SS/94 - Guide
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS FOR WOOD & METAL DOOR WEIGHT MAX 80Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
SIROCCO - LEFT HAND OPENING
SIRLH----A0A
200120120100
19
30
150200
30 MIN.46 MAX.
470 30068
10
150
14
69
54
800 MIN.1200 MAX.
54
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS FOR WOOD & METAL DOOR WEIGHT MAX 80Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
200 120 120 100
19
30150
200
30 MIN.46 MAX.
47030068
10
150
14
69
54
800 MIN.1200 MAX.
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
SIROCCO - RIGHT HAND OPENING
SIRRH----A0A
68
30 MIN46 MAX
14
19
30
15069
10
B100B
NOT TO SCALE
200 120 120 100
30 OR MORE
150
FFL
LEADING EGDE TRAILING EGDE
150
FFL
200
30 or more
100
Leading Edge Trailing Edge
120120
HSIRFAS Pelmet
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B110
huSKy 50 & 100For sliding timber and metal doors. Max. 50kg or 100kg.appliCation
• Ideally suited for room dividers and wardrobe doors• Quiet operation – galvanised steel or aluminium track with nylon rollers• Suitable for timber, timber framed, composite or metal framed doors
door SpeCiFiCation
track System husky 50 husky 100For Individual Doors:Max Door Weight 50kg 100kgMax Door Width 1250mm* 1250mm*Door Thickness 20-50mm 20-50mmMax Door Height 2400mm 2400mm
* Max door width using Husky sets. Wider doors can be accomodated by ordering track and door components separately.
Standard SetS and paCK
Sets comprise of aluminium track, 2x hangers, 1x clip stop, 1x track stop, 1x saw cut guide, face fix brackets, all screws & fitting instructions.
Husky 50 Husky 100Set no. Set no. track length max door Size
H50/15A H100/15A 1500mm 1 door H50/18A H100/18A 1800mm 1 doorH50/20A H100/20A 2000mm 1 doorH50/24A H100/24A 2400mm 1 door
pack no. application
H50N Single door fittings pack 50kg.H100 Single door fittings pack 100kg.
hhardWare SpeCiFiCation
track H280 Steel (2000, 3000, 4000 & 6000mm lengths)H280A Aluminium (2000, 3000, 4000 & 6000mm lengths)
Soffit fix spacing 275mm centres (maximum)
Brackets H281 Face fixed steel (for steel track)H281A Face fixed aluminium (for aluminium track)H281AX Endandjointingbracketaluminium(for aluminium track)
Spacing 275mm centres (maximum)
hangers (2 per door)*
H284N Nylon bodied, acetal wheel hangers (Husky 50)H284 Nylon bodied, needle roller bearings 4-wheel hangers (Husky 100)
* Each panel must be rigid enough to be supported by only two hangers
Clip Stop H601H Adjustableretainingstop
track Stop H287 Rubber buffer stop
guides H102N Nylon saw cut guideH106N/94 Roller guide. Steel plate with nylon rollerH106SL/94 Spring loaded guide (suits H81X channel & H94FM channel)
Channels H94FM Aluminium (2000, 3000, 4000 & 6000mm lengths)H94X Aluminium (2000, 3000, 4000 & 6000mm lengths)
accessoriesFascia HF134/# Fascia for soffit fixed applications for doors up to 50mm thick
HF134/ECP Fascia end clip packHF138/# Fascia for soffit fixed applications for doors up to 25mm thick HF138/ECP Fascia end clip packHF140/# Fascia for face fixed applications for doors up to 50mm thick
(includes end caps) Note: Replace # with 2000, 3000, 4000 & 6000*mm lengths. *HF140 only
Soft Stop See data sheet B100Simultaneous Kit See data sheet B120 (Husky 100 only)
H287 - Track Stop H601H - Clip Stop
H106SL/94 - Guide
H94FM - Channel
H280 - TrackH280A - Track
H281AX - Bracket
H281A - Bracket
H281 - Bracket
H284 - Hanger H284N - Hanger
H106N/94 - Guide H102N - Guide
H94 - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B110B
13 Min
A luminium Track Steel Track
2700MAX
5
7
20
1410
B B BB
8.4Ø
B = 20-50mm
* Measurementsbased on 3mmmetal framing.
35
23 Min31 Max
57
23 Min31 Max
29
15 Min23 Max
26 Min34 Max
13 Min
21
20
7
49
33 32
20
29
49
35
33 32
57
26 to 34
13 MIN.13 MIN.
23 to 3123 to 3115 to 23*
2700 MAX.
B = 20-50mmBB B B
20
21
Ø8.4
*Measurements based on 3mm metal framing
1410
816 - 305
7
7
H102NSaw Cut Guide
Alternative guide arrangement requiresanadditional
H106SL/94 Guide (Not supplied with kit)
H106SL/94 Guide (Not supplied with kit)
Alternative guide H106N/94 (Not supplied with kit) Alternative guide H106N/94
(Not supplied with kit)
H94X Channel
H94FM Channel H94X or H94
Channel
H280 Track
H280A Track H280
Track
H280A Track
H285 Hanger
H284 Hanger
HF134 Fascia
Packer Packer
F140 Fascia
H284 Hanger
H284 Hanger
H281A Face Fix Bracket
H281 Face Fix Bracket
aluminium track Steel track
NOT TO SCALE
Packer = - 14 B 2
ISSU
E 1-
0314
30
HE
ND
ER
SO
Nstraight sliding top hung systems
B120
Sim 100 (for husky)
Simultaneous action kit for bi-parting doors. Max. 100kg.appliCation
• Designed for internal bi-parting panels• TobeusedinconjunctionwiththeHusky100system• For internal partition bi-parting timber, timber framed or composite panels• Kit can be retro fitted to existing installations• Ideal for pairs of doors opening in to pocket walls• For use with either steel or aluminium Husky track• Thesystemusespolypropylenecoatedcableforquietoperation,plasticpulleywheels rotating on ball bearings to provide reliable operation and a tension spring providing smooth operation
door SpeCiFiCation
Simultaneous action Kit Sim 100Max Door Weight 100kgMinimum Door Weight 25kgMax Door Width 1250mmDoor Thickness 25-50mmMax Door Height 2400mmDoor Material Timber
Standard SetS and paCK
Set no. opening width hardware for
Sim100 2400mm 2 doors
Set CompriSeS oF
1 Polypropylene coated cable with 1 Fixed loop2 Pully assemblies with extended bolts1Adjusterboltwithnut1 RH door bracket1 LH door bracket1 Cable collar with grub screws1 Thimble inset1 Cable clamp1 Spring1 Fitting instructions
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Left hand clip stop and pulley assembly
Right hand clip stop and pulley assembly
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Cable anchored to left hand door
Cable anchored to right hand door, tensioning and adjustmentbolt
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B120B
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Diagram 2. Right hand clip stop and pulley assembly
Centre Line of doors
5mm
Left hand door Right hand door
5mm
Clip stop end bolt removed and replaced with extendedbolt, spacer and pulley assembly
Diagram 1. Left hand clip stop and pulley assembly
Diagram 4. Cable anchored to right hand door, tensioning and adjustment bolt.
Clip stop end bolt removed and replaced withextended bolt, spacer and pulley assembly
Track
Door thickness
Diagram 5.
Diagram 3. Cable anchored to left hand door
Left hand door Right hand door
Elevation view of system
Track
5mm
Left hand door Right hand door
5mm
Door thicknessCentre line of doors
Left hand door
Left hand door bracket
Cable collar Cable clamp
Thimble insert
Fixed loopSpring
Lock nut
Adjusterbolt
Adjusternut
Right hand door bracket
Right hand door
left hand clip stop and pulley assembly
Cable anchored to left hand door Cable anchored to right hand door, tensioning and adjustment bolt
right hand clip stop and pulley assembly
elevation view of system
Clip stop end bolt removed and replaced with extended bolt, spacer and pulley assembly
Cable
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B130
huSKy loW headroom 100For timber top hung sliding doors. Max 100kg.appliCation
• Designed to create a modern minimalist finish with all parts concealed • Can reduce the clearance between the track and the top of the door to 2mm• Verticallyadjustableslidingdoorkitforloworrestrictedheadroomapplications• Designed to accomodate single or multiple panels on one or more tracks• Used to maximise door height• Engineeredforeasyinstallationandadjustment
door SpeCiFiCation
track System low headroom 100
For Individual Door Leaves:Max Door Weight 100kgDoor Thickness 34-50mm*Max Door Height 2700mm
* For doors thicker than 50mm, please contact our technical sales team for further information.
Standard SetS and paCK
Sets comprise of 2x Low Headroom units, 2x end caps, 2x clip stops, guides, all screws and fitting instructions.
pack no. application
HLH100 1 door pack
H280A - TrackHLH280AN - Track
Low Headroom Unit
H281AX - BracketH281A - Bracket
H102N - Guide3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
hardWare SpeCiFiCation
track H280A Aluminium (2000, 3000, 4000 & 6000mm lengths)H280AN Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)HLH280AN Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)
Soffit fix spacing 275mm centres (maximum)
Brackets H281A Face fixed aluminiumH281AX EndandjointingbracketaluminiumH2815A Bracket pack, 5 piece pack includes 2x H281AX
Spacing 275mm centres, use H281AX at either end of track
guides H102N Nylon saw cut guideH102SS/94 Timber doors - for multiple runs of doorsH106SL/94 Spring loaded guideH106SS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94FM Aluminium (2000, 3000, 4000 & 6000mm lengths) H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H106SS/94 - Guide
H94FM - Channel
H106SL/94 - Guide
H94 - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
F140 FASCIA
F134 FASCIA
13 MIN
P
25
23
3 MIN.10 MAX.
20
8 MIN.15 MAX.
B130B
3333
??
2 MIN.9 MAX.
44 MAX37 MIN.
50 MAX34 MIN.
35
2 MIN.9 MAX.
??
35
2626
21 20
21
20
203 MIN.10 MAX.
3 MIN.10 MAX.
25
33
21
20
20
26
35
H280A Track
H106SS/94 Guide
H94X Channel
2 to 9
50 MAX.34 MIN.
44 MAX.37 MIN.
3333
??
2 MIN.9 MAX.
44 MAX37 MIN.
50 MAX34 MIN.
35
2 MIN.9 MAX.
??
35
2626
21 20
21
20
203 MIN.10 MAX.
3 MIN.10 MAX.
25
33
26
35
H280A Track
2 to 9
57
3333
??
2 MIN.9 MAX.
44 MAX37 MIN.
50 MAX34 MIN.
35
2 MIN.9 MAX.
??
35
2626
21 20
21
20
203 MIN.10 MAX.
3 MIN.10 MAX.
25
3 to 10
120
52/120/SS
102N
HH4/SS
12 MIN.25 MAX.
72 MIN.
41
31
14
5
14
7
5
H102NSaw Cut Guide
25
20
23
H106SS/94 Guide
3 to 10
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
20
20
20
20 20
21
20
H102SS/94 Guide
H106SS/94 Guide
9 to 15
H94PSC Channel
NOT TO SCALE
HLH280AN Track
Ceiling panel
Packer
Packer = - 14 B 2
26
31
119119
26
31
Cutout for low headroom unit
3333
35
2 to 9
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
H101N - GuideH104P/89 - Guide
Soltaire 120For top hung sliding doors. Max 120kg each.appliCation
• Manufactured from high grade 316 stainless steel with anodised aluminium track• This reliable system is extremely durable and ideal for coastal applications, heavy use or areasrequiringahighlevelofcorrosionresistance• Designed for interior and exterior doors up to 120kg• Ideal for residential or commercial applications• Designed to accommodate single or multiple panels on one or more tracks• Hangers available for MDF, timber or metal doors• The track can be soffit fixed or face fixed to give flexibility of installation
door SpeCiFiCation
track System Soltaire120
For Individual Doors:Max Door Weight 120kgDoor Thickness 19-48mm*Max Panel Height 3000mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
h
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
52
�22
34
3
8020
6
M8
13
H51/120/SS - Hanger
34 52
�22
M8
3
8520
H57/120/SS - Hanger3
69
15
15
33
17
�8
5234
�22
M8
5
18
H52/120/SS - Hanger �22
34 52
M8
41
H56/120/SS - Hanger
H106SS/94 - Guide
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
38
40
23
6
�5
20
6
Ø10
HH4/SS - Track Stop
41
31 2
18
H120 - Track
35
12 �10
35
5
Ø6
15 88
56
34
H5/SS - Bracket
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
B140
hardWare SpeCiFiCation
track H120 Aluminium (2000, 3000, 4000 & 6000mm lengths)H120A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)
Soffit fix spacing 600mm centres (maximum)
Brush Strips BS10, BS15, Available in black in 4 brush heights, by the metreBS20, BS25
Brackets H1/SS Face fixed stainless steelH5/SS Double run face fixed stainless steel
Starting 20mm from end of track fix at 600mm maximum centres.
hangers (2 per door)*
H51/120/SS Timber Doors – top fix – surface mountedH52/120/SS MDF Doors – face fixingH56/120/SS Metal Doors – angle frame fixingH57/120/SS Timber Doors – concealed plate fixing
* Each panel must be rigid enough to be supported by only two hangers
track Stop HH4/SS Anodised aluminium with rubber buffer
guides H101N Nylon saw cut guideH102SS/94 Timber doors - wall mounted and multiple run guideH104P/89 Metal door - angle frameH104PX/89 Metal door - box sectionH105SS/94 Timber doors - face mounted guideH106SS/94 Timber doors - concealed fixing with SS bearing
Channels H89SS Stainless steel (2000 & 3000mm length)H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H94 - Channel
IMAGE COMING
SOON
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N8
5
2020
5
8
H101NSaw Cut Guide
B140B
120
56/120/SS
104P/89
89
HH4/SS
12 MIN.25 MAX.
72 MIN.
MAX 13MIN 10
35 MIN.48 MAX.
24
25
41
31
41
31
12 to 25H56/120/SS
Hanger
120
56/120/SS
104P/89
89
HH4/SS
12 MIN.25 MAX.
72 MIN.
MAX 13MIN 10
35 MIN.48 MAX.
24
25
41
31
25
24
10 to 13
H104P/89 Guide
H89SS Channel
12 MIN.25 MAX.
41
31
20
12
21
20
3 MIN.10 MAX.
25
H106SS/94 Guide
H94PSC Channel
H1/SS Face Fix Bracket
41
31
20
21
20
20
12
H57/120/SS Hanger
12 to 24
3 to 15
NOT TO SCALE
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
20
21
20
H102SS/94 Guide
H106SS/94 Guide
H94 Channel H94X Channel
3 to 15
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
H94 Channel H94X Channel
3 to 15
120
52/120/SS
102N
HH4/SS
12 MIN.25 MAX.
72 MIN.
31
7
14
19
35
40.7
12
5
41
31
1235
12 to 25H52/120/SS
Hanger
H1/SS Face Fix Bracket
120
51/120/SS
94X
106SS/94
HH4/SS
5/SS
19 MIN.32 MAX.
72 MIN.
35 MIN.48 MAX.
21
20
50 500 50500
31
41 34 MIN.57 MAX.
8835
�10
3 MIN.15 MAX.
80 20
80
31
41
88
19 to 32
34 to 57
H51/120/SSHanger
H5/SS Face Fix Bracket
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B150
Soltaire loW headroom 120For timber top hung sliding doors. Max 120kg.appliCation
• Designed to create a modern minimalist finish with all parts concealed • Can reduce the clearance between the track and the top of the door to 2mm• Verticallyadjustableslidingdoorkitforloworrestrictedheadroomapplications• Used to maximise door height• Engineeredforeasyinstallationandadjustment• Designed to accomodate single or multiple panels on one or more tracks
door SpeCiFiCation
track System low headroom 120
For Individual Door Leaves:Max Door Weight 120kgDoor Thickness 35-48mm*Max Door Height 2700mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
Standard paCK
Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fitting instructions.
pack no. application
HLH120 1 door pack
h
Low Headroom Unit
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
38
40
23
6
�5
20
6
Ø10
HH4/SS - Track Stop
41
31 2
18
H120 - Track
35
12 �10
35
5
Ø6
15 88
56
34
H5/SS - Bracket
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
hardWare SpeCiFiCation
track H120 Aluminium (2000, 3000, 4000 & 6000mm lengths)H120A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)
Soffit fix spacing 600mm centres (maximum)
Brackets H1/SS Face fixed stainless steelH5/SS/120 Double face fixed stainless steel
Starting 20mm from end of track fix at 600mm centres (maximum)
track Stop HH4/SS Anodised aluminium with rubber buffer
guides H102N Nylon saw cut guideH102SS/94 Timber doors - wall mounted and multiple run guideH105SS/94 Timber doors - face mounted guideH106SS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H106SS/94 - Guide
H102N - Guide
H94 - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
41
31
12
21
20
3 MIN.10 MAX.
2 MIN.9 MAX.
H106SS/94 Guide
H94PSC Channel
H1/SS Face Fix Bracket
B150B
41
31
20
25
23
26
12
3 to 15
2 to 9
3 to 15
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
20
20
20
20 20
21
20
H102SS/94 Guide
H106SS/94 Guide
3 to 15
H94X Channel
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
20
20
20
2020
21
20
H106SS/94 Guide
41
31 31
41 34 MIN.57 MAX.
8841
26
31
H120 Track
41
31 31
41 34 MIN.57 MAX.
88
34 to 57
41
88
2626
31
H120 Track
H5/SS Double Face Fix Bracket
NOT TO SCALE
35 MIN.48 MAX.
26
31
119119
26
31
Cutout for low headroom unit
120
52/120/SS
102N
HH4/SS
12 MIN.25 MAX.
72 MIN.
41
31
14
5
14
7
5
H102NSaw Cut Guide
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B160
SiennaFor sliding timber doors. Max. 120kg.appliCation
• Elegant timber door system that creates a minimalist look• 120kg system designed for doors 30-70mm thickness• Rollers are engineered to run effortlessly along a brushed stainless steel track• Stops are positioned to run on the track to limit door travel• Highqualitystainlesssteelhangersandbrackets
door SpeCiFiCation
track System SiennaFor Individual Doors:Max Door Weight 120kgMin Door Width 700mmDoor Thickness 30-70mm Max Door Height 2500mm
Standard SetS and paCKS
Sets comprise of 2 hangers, 2 left & right door stops, one guide & 2 bar end caps
pack no. hardware for
HSN120T 1 door
hardWare SpeCiFiCation hardWare SpeCiFiCation
track H25 Stainless Steel (2000, 2500, 3000, 3500, 4000 & 5000mm lengths)Ø25mm tubular track, drilled and pre-assembled with correct number of brackets
track Stop H25/UDS(2 per door)
guides H101/SS Floor guide
end Cap H25/EC End cap for track H25 - Track
H25/UDS - Track Stop
H25/EC - End Cap
Wall Plate
Hanger
H101/SS - Floor Guide
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B160B
51
100
38
5
14
6
51
38
100
Hanger
Wall Plate
H25 Track
14
6
5
H101/SS Floor Guide
150
150
=
=
=
NOT TO SCALE
150
150
Standard Bar no. of Fixing plates/Brackets
2000mm 4
2500mm 5
3000mm 6
3500mm 7
4000mm 8
5000mm 11
Door height (DH)DH = OH + 40 - 7mm
Opening width OW
Openingheight (OH)
Door width (DW)DW = OW + 80mm
40
40
7
14.5
150
40mm
XOH
Y
X = 150 - 40 = 110mmY = 40 + 41 = 81mm
Floor
OPENING
Marking firstbracket position
40
40
40150
Floor
OPENING
X = 150 - 40 = 110mmY = 40 + 41 = 81mm
Door Height (DH) DH = OH + 40 - 7mm
Opening Height (OH)
Opening Width (OW)
Door Width (DW) DW = OW + 80mm
marking first bracket position
X oh
y
7
14.5
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B170
Soltaire 180For top hung sliding doors. Max 180kg each.appliCation
• Manufactured from high grade 316 stainless steel with anodised aluminium track • This reliable system is extremely durable and ideal for coastal applications, heavy use or areasrequiringahighlevelofcorrosionresistance• Designed for interior and exterior doors up to 180kg• Ideal for residential or commercial applications• Designed to accommodate single or multiple panels on one or more tracks• Hangers available for timber or metal doors• The track can be soffit fixed or face fixed to give flexibility of installation
door SpeCiFiCation
track System Soltaire 180
For Individual Doors:Max Door Weight 180kgDoor Thickness 35-48mm*Max Panel Height 3000mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
39 80
�32
M10
120
H56X/180/SS - Hanger
39 80
�32
M10
45
H56/180/SS - Hanger
H5H/SS - Bracket
39 80
�33
3 65
165
165
M10
�10
15
6322
35
H53/180/SS - Hanger
H52/180/SS - Hanger
39 80
�33
5
25 140
M10
H57/180/SS - Hanger
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide H106HSS/94 - Guide
45
60
�6
6,0
20
Ø10
246
HH5/SS - Track Stop
47
45
2
19
H180 - Track
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
H104P/89 - Guide
H104PX/89 - Guide
hardWare SpeCiFiCation
track H180A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)Soffit fix spacing 900mm centres (maximum)
Brush Strips BS10, BS15, Available in black in 4 brush heights, by the metreBS20, BS25 (mm)
Brackets H1/SS Face fixed stainless steelH5/SS Double run face fixed stainless steel
Starting 20mm from end of track fix at 900mm maximum centres.
hangers (2 per door)*
H52/180/SS Timber doors – angle plate fixingH53/180/SS Timber doors – saddle plate fixingH56/180/SS Metal doors – angle frame fixingH56X/180/SS Metal doors – box frame fixingH57/180/SS Timber doors – concealed plate fixingH57/180/SS Metal doors – concealed plate fixing
* Each panel must be rigid enough to be supported by only two hangers
track Stop HH5/SS Anodised aluminium with rubber buffer
guides H102SS/94 Timber doors - wall mounted and multiple run guideH104PX/89 Metal door - box sectionH104P/89 Metal door - angle frameH105SS/94 Timber doors - face mounted guideH106HSS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H89SS Stainless steel (2000 & 3000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H94 - Channel
ISSU
E 1-
0314
IMAGE COMING
SOON
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B170B
56/180/SS
89
104P/89
180
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
35 MIN.48 MAX.
45
47
5050050 500
�10
88
72
34 MIN - 56 MAX
18 MIN - 24 MAX
24
25
6 MIN.15 MAX.
3712
12 to 42
88
47
45
72
H5H/SS Double Face Fix Bracket
H56/180/SS Hanger
12 MIN.
35 MAX.
47
45
12 to 42
47
45
H56X/180/SS Hanger
180
53/180/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
47
45
21
20
10
35 MIN.48 MAX.
35 MIN.
48 MAX.
MIN 73
51
65
21
15162
35
63
12to 35
35 MIN.48 MAX.
45
47
H53/180/SS Hanger
180
52/120/SS
106SS/94
HH5/SS1/SS
94X
35
12 MIN.35 MAX.
47
45
500
1027
5
13
140
21
20
25
6
�1050
5
35 MIN.48 MAX.
18
68
23
500 50
12 to 32
23
45
47
13
H52/180/SS Hanger
H1/SS Face Fix Bracket
56/180/SS
89
104P/89
180
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
35 MIN.48 MAX.
45
47
5050050 500
�10
88
72
34 MIN - 56 MAX
18 MIN - 24 MAX
24
25
6 MIN.15 MAX.
3712
6 to 15
25
24
H104P/89 Guide
H89SS Channel
56X/180/SS
89
104PX/89
180
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
45
47
5050050 500
�10
34 MIN - 56 MAX
18 MIN - 24 MAX
88
72
24
6 MIN.15 MAX.
25
3712
6 to 15
25
24
H104PX/89 Guide
H89SS Channel
NOT TO SCALE
180
57/180/SS
106HSS/94
HH5/SS
1/SS
94X
35
12 MIN.35 MAX.
47
45
500
1027
5
15
140
21
20
25
25
6
�1050
5
35 MIN.48 MAX.
18
MIN 35
23
500 50
12 to 32
35 MIN.48 MAX.*
21
25
3 to 10
20
15
47
23
45
H106HSS/94 Guide
H94PSC Channel
H1/SS Face Fix Bracket
H57/180/SS Hanger
25
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H102SS/94 Guide
H106HSS/94 Guide
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
180
53/180/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
47
45
21
20
10
35 MIN.48 MAX.
35 MIN.
48 MAX.
MIN 73
51
65
21
15162
35
63
21
20
10
H105SS/94Guide
H94X Channel
* For doors thicker than 48mm, please contact our technical sales team for further information.
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B180
For timber top hung sliding doors. Max 180kg.appliCation
• Designed to create a modern minimalist finish with all parts concealed • Can reduce the clearance between the track and the top of the door to 2mm• Verticallyadjustableslidingdoorkitforloworrestrictedheadroomapplications• Used to maximise door height• Engineeredforeasyinstallationandadjustment• Designed to accomodate single or multiple panels on one or more tracks
door SpeCiFiCation
track System low headroom 180
For Individual Door Leaves:Max Door Weight 180kgMax Door Width 3300mmDoor Thickness 35-48mm*Max Door Height 2700mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
Standard paCK
Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fit-ting instructions.
pack no. application
HLH180 1 door pack
h
Soltaire loW headroom 180
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
45
60
�6
6,0
20
Ø10
246
HH5/SS - Track Stop
Low Headroom Unit
47
45
2
19
H180 - Track
hardWare SpeCiFiCation
track H180A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)Soffit fix spacing 900mm centres (maximum)
Brackets H1/SS Face fixed stainless steelH5H/SS Double face fixed stainless steel (heavy)
Starting 20mm from each end of track fix at 900mm centres (max.)
track Stop HH5/SS Anodised aluminium with rubber buffer
guides H102SS/94 Timber doors - wall mounted and multiple run guideH105SS/94 Timber doors - face mounted guideH106HSS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H5H/SS - Bracket
H106HSS/94 - Guide
H94 - Channel
ISSU
E 1-
0314
IMAGE COMING
SOON
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B180B
180
53/180/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
47
45
21
20
10
35 MIN.48 MAX.
35 MIN.
48 MAX.
MIN 73
51
65
21
15162
35
63
21
20
3 to 15
H105SS/94Guide
H94X Channel
26 26 26
45
47
88
7247
45
47
26
45
H180 Track
26 26 26
45
47
88
7247
45
47
88
2626
72
45
H180 Track
H5H/SS Double Face Fix Bracket
NOT TO SCALE
47
45
23
21
20
3 MIN.10 MAX.
25
26
2 MIN.9 MAX.
47
45
25
25
23
26
23
3 to 10
H106HSS/94 Guide
H94PSC Channel
H1/SS Face Fix Bracket
2 to 9
35 MIN.48 MAX.
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
3 to 15
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H102SS/94 GuideH106HSS/94
Guide
H94X Channel
3 to 15
26
31
119119
26
31
Cutout for low headroom unit
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systemspaCer
For top hung sliding timber and metal doors. Max. 200kg.appliCation
• Ideally suited to shop fronts, offices and other stylish interiors• Designed for straight sliding doors in timber, aluminium or metal
door SpeCiFiCation
track System pacerFor Individual Doors:Max Door Weight 200kgMax Door Width 2000mmDoor Thickness 35-50mm*Max Door Height 3000mm
* For doors thicker than 50mm, please contact our technical sales team for further information.
hhardWare SpeCiFiCation
track H600 Aluminium (2000, 3000, 4000 & 6000mm lengths)
Brackets H1B Face fixedH1BX Jointing and end bracket
hangers (2 per door)
H52B Timber Doors – angle plate fixingH56B Metal Doors – angle frameH56BX Metal Doors – box frameH57B Timber/Metal Doors – concealed fixing
Clip Stop H601P Adjustableretainingstop
guides H102SS/94 Timber doors - wall mounted and multiple run guideH104PX/89 Metal door - box sectionH104P/89 Metal door - angle frameH105SS/94 Timber doors - face mounted guideH106HSS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H89SS Stainless steel (2000 & 3000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesFascia HF160 Anodised aluminium for soffit fixed applications
(2000, 2500, 3000, 3500, 4000 & 6000mm lengths)HF200 Anodised aluminium with standard return for face fixed
applications (2000, 2500, 3000, 3500, 4000 & 6000mm lengths)
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
H104P/89 - GuideH104PX/89 - Guide
H106HSS/94 - Guide
H94 - Channel
ISSU
E 1-
0314
B190
H600 - TrackH601 - Clip Stop
H56B - Hanger
H57B - Hanger
H56BX - Hanger
H1BX - Bracket
H52B - Hanger
H1B - Bracket
IMAGE COMING
SOON
IMAGE COMING
SOON
IMAGE COMING
SOON
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
48
51
54
12 to 28
3 to 10
25
20
21
12 to 28
21
25
20
51
54
H106HSS/94 Guide
H94PSC Channel
H1B Face Fix Bracket
H57B Hanger
3 to 10
56/250/SS
89
104P/89
250
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
35 MIN.48 MAX.
50
50
5050050 500
�10
88
72
34 MIN - 56 MAX
18 MIN - 24 MAX
24
25
6 MIN.15 MAX.
3712
6 to 15
25
24
H104P/89 Guide
H89SS Channel
56X/250/SS
89
104PX/89
250
HH5/SS
5H/SS
107 MIN.
5050050 500
�10
12 MIN.35 MAX.
50
50
34 MIN - 56 MAX
18 MIN - 24 MAX
88
72
24
25
6 MIN.15 MAX.
3712
6 to 15
25
24
H104PX/89 Guide
H89 Channel
54
12 to 28
H56BX Hanger
NOT TO SCALE
250
53/250/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
50
50
21
20
10
35 MIN.48 MAX.
15 16235
63
22
6573 MIN.
35 MIN.
48 MAX.
21
20
10
H105SS/94Guide
H94X Channel
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H102SS/94 Guide
H106HSS/94 Guide
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
54
12 to 2812 to 28 12 to 28
54 54
H56B Hanger
B190B
ISSU
E 1-
0314
48
51
54
12 to 2812 to 28
54
H52B Hanger
H1B Face Fix Bracket
51
48
HE
ND
ER
SO
Nstraight sliding top hung systems
B200
Soltaire 250For top hung sliding doors. Max 250kg each.appliCation
• Manufactured from high grade 316 stainless steel with anodised aluminium track • This reliable system is extremely durable and ideal for coastal applications, heavy use or areasrequiringahighlevelofcorrosionresistance• Designed for interior and exterior doors up to 250kg• Ideal for residential or commercial applications• Designed to accommodate single or multiple panels on one or more tracks• Hangers available for timber or metal doors• The track can be soffit fixed or face fixed to give flexibility of installation
door SpeCiFiCation
track System Soltaire 250
For Individual Doors:Max Door Weight 250kgDoor Thickness 35-48mm*Max Panel Height 3300mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
39
M10
3
164
164
82
�38
65
2263
35
15
H53/250/SS - Hanger
39
M10
82
�38
45
H56/250/SS - Hanger
39
M10
82
�38
120
H56X/250/SS - Hanger39
25
82
�38
5
140
H57/250/SS - Hanger
5050
3
20
H250 - Track45
60
�6
6,0
20
Ø10
246
HH5/SS - Track Stop
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
H104P/89 - Guide
H104PX/89 - Guide
hardWare SpeCiFiCation
track H250A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)Soffit fix spacing 900mm centres (maximum)
Brush Strips BS10, BS15, Available in black in 4 brush heights, by the metreBS20, BS25 (mm)
Brackets H1/SS Face fixed stainless steelH5H/SS Double face fixed stainless steel (heavy)
Starting 20mm from end of track fix at 900mm maximum centres.
hangers (2 per door)*
H52/250/SS Timber doors – angle plate fixingH53/250/SS Timber doors – saddle plate fixingH56/250/SS Metal doors – angle frame fixingH56X/250/SS Metal doors – box frame fixingH57/250/SS Timber doors – concealed plate fixingH57/250/SS Metal doors – concealed plate fixing
* Each panel must be rigid enough to be supported by only two hangers
track Stop HH5/SS Anodised aluminium with rubber buffer
guides H102SS/94 Timber doors - wall mounted and multiple run guideH104PX/89 Metal door - box sectionH104P/89 Metal door - angle frameH105SS/94 Timber doors - face mounted guideH106HSS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H89SS Stainless steel (2000 & 3000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H52/250/SS - Hanger
H5H/SS - Bracket
H106HSS/94 - Guide
H94 - Channel
ISSU
E 1-
0314
IMAGE COMING
SOON
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B200B
56/250/SS
89
104P/89
250
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
35 MIN.48 MAX.
50
50
5050050 500
�10
88
72
34 MIN - 56 MAX
18 MIN - 24 MAX
24
25
6 MIN.15 MAX.
3712
12 to 38
88
50
50
72
H5H/SS Double Face Fix Bracket
H56/250/SS Hanger
57/250/SS
106HSS/94
94X
250
HH5/SS
1/SS
35
1027
5
15
140
21
20
25 3 MIN.10 MAX.
35 MIN.48 MAX.
12 MIN.35 MAX.
50
500�10
50
618
50
36 MIN
38
23
25
500 50
12 to 28
35 MIN.48 MAX.*
21
25
20
15
50
23
50
H106HSS/94 Guide
H94PSC Channel
H1/SS Face Fix Bracket
H57/250/SS Hanger
3 to 10
250
52/250/SS
106HSS/94
HH5/SS
1/SS
94X
35
12 MIN.35 MAX.
50
500
1027
5
140
21
20
25
6
�1050
5
35 MIN.48 MAX.
68
50
38
23
13
500 50
12 to 28
23
50
50
13
H52/250/SS Hanger
H1/SS Face Fix Bracket
38
56/250/SS
89
104P/89
250
HH5/SS
5H/SS
12 MIN.35 MAX.
107 MIN.
35 MIN.48 MAX.
50
50
5050050 500
�10
88
72
34 MIN - 56 MAX
18 MIN - 24 MAX
24
25
6 MIN.15 MAX.
3712
6 to 15
25
24
H104P/89 Guide
H89SS Channel
56X/250/SS
89
104PX/89
250
HH5/SS
5H/SS
107 MIN.
5050050 500
�10
12 MIN.35 MAX.
50
50
34 MIN - 56 MAX
18 MIN - 24 MAX
88
72
24
25
6 MIN.15 MAX.
3712
6 to 15
25
24
H104PX/89 Guide
H89 Channel
50
50
12 MIN.35 MAX.12 to 38
50
50
H56X/250/SS Hanger
NOT TO SCALE
250
53/250/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
50
50
21
20
10
35 MIN.48 MAX.
15 16235
63
22
6573 MIN.
35 MIN.
48 MAX.
21
20
10
H105SS/94Guide
H94X Channel
25
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H102SS/94 Guide
H106HSS/94 Guide
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
250
53/250/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
50
50
21
20
10
35 MIN.48 MAX.
15 16235
63
22
6573 MIN.
35 MIN.
48 MAX.
12 to 35
50
50
H53/250/SS Hanger
35 MIN.48 MAX.
* For doors thicker than 48mm, please contact our technical sales team for further information.
ISSU
E 1-
0314
DRAF
T
HE
ND
ER
SO
Nstraight sliding top hung systems
B210
For timber top hung sliding doors. Max 250kg.appliCation
• Designed to create a modern minimalist finish with all parts concealed • Can reduce the clearance between the track and the top of the door to 2mm• Verticallyadjustableslidingdoorkitforloworrestrictedheadroomapplications• Used to maximise door height• Engineeredforeasyinstallationandadjustment• Designed to accomodate single or multiple panels on one or more tracks
door SpeCiFiCation
track System low headroom 250
For Individual Door Leaves:Max Door Weight 250kgDoor Thickness 35-48mm*Max Door Height 3300mm
* For doors thicker than 48mm, please contact our technical sales team for further information.
Standard paCK
Pack comprises of 2x Low Headroom units, 2x end caps, 2x track stops, all screws and fitting instructions.
pack no. application
HLH250 1 door pack
h
Soltaire loW headroom 250
50
50
3
20
H250 - Track
Low Headroom Unit
35
12 �10
35
Ø6
15
5
H1/SS - Bracket
3
57
42
30
21
Ø16
40
9 22
13�10
26
H102SS/94 - Guide
5
102
120
Ø16
38
51
10 10
10
�6
H105SS/94 - Guide
45
60
�6
6,0
20
Ø10
246
HH5/SS - Track Stop
hardWare SpeCiFiCation
track H250A Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)Soffit fix spacing 900mm centres (maximum)
Brackets H1/SS Face fixed stainless steelH5H/SS Double face fixed stainless steel (heavy)
Starting 20mm from each end of track fix at 900mm centres (max.)
track Stop HH5/SS Anodised aluminium with rubber buffer
guides H102SS/94 Timber doors - wall mounted and multiple run guideH105SS/94 Timber doors - face mounted guideH106HSS/94 Timber doors - concealed fixing with SS bearing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
accessoriesInterlocking Seal
H59BZ/4800 Bronzeanodised(4800mm to suit typical 2400mm door height)H59CA/4800 Clear anodised aluminium
(4800mm to suit typical 2400mm door height)Drilled and countersunk. Includes brush seal.Refer to Components Section for more information
H5H/SS - Bracket
H106HSS/94 - Guide
H94 - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
50
50
38
23
21
20
3 MIN.10 MAX.
25
26
2 MIN.9 MAX.
50
38
50
25
25
23
26
23
H1/SS Face Fix Bracket
H106HSS/94 Guide
H94PSC Channel
3 to 15
26 26 26
50
50 50
50
88
7250
26
50
H250 Track
26 26 26
50
50 50
50
88
7250
88
2626
72
50
H250 Track
H5H/SS Double Face Fix Bracket
NOT TO SCALE
2 MIN.9 MAX. 250
53/250/SS
105SS/94
HH5/SS
94X
12 MIN.35 MAX.
50
50
21
20
10
35 MIN.48 MAX.
15 16235
63
22
6573 MIN.
35 MIN.
48 MAX.
21
20
3 to 15
H105SS/94Guide
H94X Channel
B210B
35 MIN.48 MAX.
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H106HSS/94 Guide
3 to 15
12 MIN.25 MAX.
41
31
20
35 MIN.48 MAX.
1235
19 MIN.32 MAX.
31
41 34 MIN.57 MAX.
88
25 25
21
20
21
20
25
21
20
H102SS/94 GuideH106HSS/94
Guide
H94X Channel
3 to 15
26
26
31
177177
2626
31
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B220
FleXirol 500For top hung sliding timber and metal doors. Max. 500kg.
appliCation
• Ideallysuitedtohotels,conferencecentres,shopfronts,showroomsoranysiterequiring high performance and an attractive finish• Designed for straight sliding doors in timber, metal or glass
door SpeCiFiCation
track System Flexirol 500For Individual Doors:Max Door Weight 500kg. 2 Hangers per leaf.Max Door Width 6000mmDoor Thickness 40-100mm*Max Door Height 6000mm
* For doors thicker than 100mm, please contact our technical sales team for further information.
hardWare SpeCiFiCation
track H550 Anodised Aluminium (2000, 3000, 4000 & 6000mm lengths)See Components Section for full range of finishes
Brackets H1A/550 Face fixedH3S/550 Soffit fixed
hangers H556 Metal doors - angle frame fixing(2 per door)* H556/52 Timber doors - angle plate fixing
H556/57 Timber doors - concealed plate fixing* Each panel must be rigid enough to be supported by only two hangers
track Stop H3/301 Flexirol track stop
guides H104N/94 Metal doors - angle frame fixingH104NX/94 Metal doors - box frame fixingH106HSS/94 Timber doors - concealed fixing
Channels H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94P Polypropylene (2000, 3000, 4000 & 6000mm lengths)H94PSC Aluminium supporting channel and polypropylene
(2000, 3000, 4000 & 6000mm lengths)
H104P/89 - Guide
H104PX/89 - Guide H106HSS/94 - Guide
H1A/550 - Bracket
H3S/550 - Bracket
H556/52 - Hanger H556/57 - Hanger
H556 - Hanger
H550 - Track
H94 - Channel
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
B220B
10-40
152
154
13
18
73
6 MINIMUM CLEARANCE
35
0-15
18-30
73
100
10-20
MINIMUM THICKNESSFOR A TIMBER DOOR
WHEN USING 21MOUNTING ANGLE
PLATE
10-40
38
25
98
9898
10-40
152
154
13
18
73
6 MINIMUM CLEARANCE
35
0-15
18-30
73
100
10-20
MINIMUM THICKNESSFOR A TIMBER DOOR
WHEN USING 21MOUNTING ANGLE
PLATE
10-40
38
25
98
9898
10-40
152
154
13
18
73
6 MINIMUM CLEARANCE
35
0-15
18-30
73
100
10-20
MINIMUM THICKNESSFOR A TIMBER DOOR
WHEN USING 21MOUNTING ANGLE
PLATE
10-40
38
25
98
989898
38
18
9898100
152
154
73
35
6 Minimum clearance
Minimum thickness for a timber door
when using 21 Mounting Angle Plate
13
25
73
10-20
10-40 10-40
0-15
18-30
H94PSC Channel
H21R/94 Guide
H556/21 Hanger
H556 Hanger
H550 Track
H3S/550 Bracket
H1A/550 Bracket
H556/61 Hanger
H106HHSS/94 Guide
HSF190C Flushbolt
NOT TO SCALE
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B230
Straight Sliding 290For timber or metal top hung sliding doors. Max 150 or 200kgappliCation
• Designed for commercial and industrial applications • Designed to accomodate single or multiple panels on one or more tracks• Versatile range of hanger, track, bracket and guide options, allows the 290 system a wide range of applications• Where doors are fitted externally, a canopy is recommended
door SpeCiFiCation
track System 290
For Individual Doos:Max Door Wt Nylon Hanger 150kgMax Door Wt Steel Hanger 200kgDoor Thickness 35-48mmMax Door Height 3000mm
h
H56KX - Hanger
H4A/290 - Bracket
H105R/89 - Guide
H56K - HangerH52K - Hanger
H106R/89 - Guide
H57K - Hanger
H5A/290 - BracketH4R/290S -
Bracket
H9A/290 - Bracket
H1/290S - Bracket
H4R/290SB - Bracket
H53K - Hanger
hardWare SpeCiFiCation
track H290 Galvanised Steel (2000, 2500, 3000, 4000 & 6000mm lengths)Fix spacing at 900mm centres (maximum)
Brackets Aluminium Steel (Zinc plated)H1A/290 H1/290S Face fix, single trackH3A/290 - Soffit fix, single trackH4A/290 - Soffit fix (in line), single track
- H4R/290S Soffitfix(adjustable),singletrackH5/290 - Face fix, double trackH9A/290 - Face fix (low headroom), single trackRefer to Components Section for closed and jointing bracket options
hangers (2 per door)*
150kg 200kgH52K/N H52K/S200 Timberdoors - angle plate fixingH53K/N H53K/S200 Timber doors - apron fixingH57K/N H57K/S200 Timber doors - concealed fixingH56K/N H56K/S200 Metal doors - angle frameH56KX/N H56KX/S200 Metal doors - box frameH57K/N H57K/S200 Metal doors - concealed plate- All hangers suffixed ‘N’ have silent running nylon wheels and ‘S’ have steel wheels.- Nylon wheeled hangers should not be used on installations involving temperatures exceeding 80˚C
* Each panel must be rigid enough to be supported by only two hangers
guides H31D Wall guide, doubleH31S Wall guide, singleH104P/89 Metal doors – angle frameH104PX/89 Metal doors – box frameH105R/89 Timber doorsH106R/94 Timber doors – concealed fixingH126 Ground stay roller
Channels H89 Galvanised steel (2000, 3000 & 4000mm lengths)H94X Aluminium (2000, 3000, 4000 & 6000mm lengths) H94 Brass (4000 & 6000mm lengths)
Pre-drilled and countersunk for wood or lugging into concrete.
H104P/97 - Guide
H31S - Guide
H31D - Guide
H104PX/97 - Guide
H126 - Guide
H290 - TrackH1A/290 - Bracket
H89 - Channel
5
102
120
Ø16
38
51
10 10
10
�6
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
MIN 22MAX 28
105
27
45
27 30
5151
13
52
67
MIN 40MAX 52
21
20
3
9.6
25.4
MIN 22MAX 28
25
24
MAX 900
45
MAX 900
40 MIN52 MAX
Ø17
MIN 127 MIN 127
10-13
36
Ø10.5
75
57
47
Ø8
4A/290
104P
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 150Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
56K/N or 56K/S
1A/290EC
290
HH3/290
89
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
290 - STRAIGHT SLIDING
290/4A/56K/104P/89
----A0A
DOUBLE RUN STEEL
MIN 22MAX 28
25
24
MAX 900
45
MAX 900
40 MIN52 MAX
Ø17
MIN 127 MIN 127
10-13
36
Ø10.5
75
57
47
Ø8
4A/290
104P
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 150Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
56K/N or 56K/S
1A/290EC
290
HH3/290
89
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
290 - STRAIGHT SLIDING
290/4A/56K/104P/89
----A0A
DOUBLE RUN STEEL
MIN 22MAX 28
MIN 40MAX 52
6
25
24
102
MAX 900
MIN 100 57
45
3 10-13102
MAX 900
10
25
27 30
51 51
Ø12MIN 45
2.5 2.5
38 27 54
80
20
118
36
38 38
5A/290
53K/N or 53K/S
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 150Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
1A/290EC
290
HH3/290
106R
89
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
290 - STRAIGHT SLIDING
290/5A/53K/106R/89
----A0A
DOUBLE RUN TIMBERH106R/94 Guide
MIN 22MAX 28
25
24
36
45 56
MIN 40MAX 52
10-13
MIN 22MAX 28
25
24
36
45 56
MIN 40MAX 52
10-13
36
36
36
45
45
45
5427
20
80
118
2.5 2.5
27
51
30
51
56
22 to 28
22 to 28
22 to 28
10 to 13 10 to 13
MIN 40MAX 52
MIN 40MAX 52
MIN 40MAX 52
H56KX Hanger
H56K Hanger
H52K Hanger
H57K Hanger
H53K Hanger
H1A/290 Bracket
H3A/290 Bracket
H4A/290 Bracket
H9A/290 Bracket
H5/290 Bracket
H290 Track
H290 Track
B230B
Concrete Lug
H89 Channel
H89 Channel
H104/89 Guide
H104PX/89 Guide
52
45
22 to 28
MIN 40MAX 52
27
13
67
105
30
51
27
51
20
3
25.4
9.6
25 25
24
21
Ø12
Ø10.5
NOT TO SCALE
H126 Guide 50
H31S Guide
98 MAX(Adjustable distance)
21
40
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B240
Straight Sliding 301For timber or metal top hung sliding doors. Max 300, 400 or 450kg
appliCation
• Designed for commercial, industrial and agricultural applications • Designed to accomodate single or multiple panels on one or more tracks• Versatile range of hanger, track, bracket and guide options, allows the 301 system to be used in a wide range of applications• Where doors are fitted externally, a canopy is recommended• Suitable for Fire Resistant applications
door SpeCiFiCation
track System 301 301h
For Individual Doors:Max Door Wt Nylon Hanger 400kg 450kgMax Door Wt Steel Hanger 300kg 360kgDoor Thickness 43-57mm* 43-57mm*Max Door Height 3600mm 4200mm
* For doors outside the recommended door thickness, please contact our technical sales team for further information.
h
H3A/301- Bracket
H4/301S - Bracket
H1A/301 - Bracket
H7/301S - Bracket
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
748685----
A4
57A HANGER
A
141
�55
140
185 M16
42H57A - Hanger
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
142
32-
65
11
20
112260
60
140
42
76 43-57
3,2
n56
53A HANGER
----A4A
747590
H53A - Hanger
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
142
122 102
72
1111
38
11
11
11
165
42
51
13
35 76
4445
13
5
M16
n56
52A HANGER747356----A4A
H52A - Hanger
H126H - Guide
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
142
138
M16
42
85
n56
70
56A HANGER
748238
----A4A
H56A - Hanger
H102/97 - Guide
H104P/97 - Guide
H4R/301S - Bracket
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
741424
A
A4----
128 GUIDE
137
89
45
�14
19
H128 - Guide
H4A/301 - Bracket
H6A/301 - Bracket
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
56AF HANGER748301
----A4A
97
141 42
44
42
�55
M16
H56AF - Hanger
H5R/301S - Bracket
H31S - Guide
H31D - Guide
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
56AX HANGER
748283----A4
A
141
�55
146
42
161
M16
H56/AX - Hanger
H8/301S - Bracket
hardWare SpeCiFiCation
track H301 or H301H Galvanised Steel (2000, 2500, 3000, 4000 & 6000mm lengths)Fix spacing at 900mm centres (maximum)
Brackets Aluminium Steel (Zinc plated)H1A/301 H1/301S Face fix, single trackH3A/301 H3/301S Soffit fix, single trackH4A/301 H4/301S Soffit fix (in line), single track
- H4R/301S Soffitfix(adjustable),singletrackH5/301 - Face fix, double trackH6/301 - Soffit fix, double track
- H7/301S Face fix, triple track- H8/301S Soffit fix, triple track- H9/301S Face fix (low headroom), single track
Refer to Components Section for closed and jointing bracket options
hangers (2 per door)*
Steel wheels Nylon wheelsH52A/S H52A/N Timberdoors - angle plate fixingH53A/S H53A/N Timber doors - apron fixingH56A/S H56A/N Metal doors - angle frameH56AX/S H56AX/N Metal doors - box frameH57A/S H57A/N Timber/metal doors - concealed plate- All hangers suffixed ‘N’ have silent running nylon wheels and ‘S’ have steel wheels.- Nylon wheeled hangers should not be used on installations involving temperatures exceeding 80˚C
* Each panel must be rigid enough to be supported by only two hangers
guides H31D Wall guide, doubleH31S Wall guide, singleH102/97 Timber doorsH104P/97 Metal doors – angle frameH104PX/97 Metal doors – box frameH106R/97 Timber doors – concealed fixingH126H Ground stay rollerH128 Shoe guide
All steel parts are electro zinc-plated.
Channels H97 Galvanised steel (1800, 2000, 2500, 3000, 4000 & 6000mm lengths)Pre-drilled for lugging into concrete and for use in drainage funnel.
H5A/301 - Bracket
H104PX/97 - Guide
H106R/97 - Guide
H301 - Track
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 350 OR 450Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
6A
EC
301(H)
HH3/301
56A/N OR 56A/S
104P
97
79
152
MIN 43MAX 57
95
16
66
MIN 20MAX 55
24
10 - 13
127 127 127
MIN 192
MAX 900
Ø11
92
79
86
38
27
38
27
MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/6A/56A/104P/97
----A0A
DOUBLE RUN STEEL
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 300 OR 450Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
5A
EC
301(H)
HH3/301
53A/N OR 53A/S
106R
97
39 44
110
185
66
32 MIN65 MAX
33
60
60
33
MAX 900
57 57 57
18
25
3 10-13
MIN 154 76 11 20
3
MIN 43MAX 57
102
27
38
MAX 900
63 79
Description:
Drawing-size:Revision:
PCH-code:CAD-scale: E-MAIL: [email protected]
Telephone: 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/5A/53A/106R/97----A0A
DOUBLE RUN TIMBER
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 350 OR 450Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
6A
EC
301(H)
HH3/301
56A/N OR 56A/S
104P
97
79
152
MIN 43MAX 57
95
16
66
MIN 20MAX 55
24
10 - 13
127 127 127
MIN 192
MAX 900
Ø11
92
79
86
38
27
38
27
MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/6A/56A/104P/97
----A0A
DOUBLE RUN STEEL
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 450 Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
3A
EC
301(H)
HH3/301
56A/N OR56A/S
104P
97
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale:
DESCRIPTION?_001PCH_CODE?_001SCALE?_001DWG_SIZE?_001REVISION?_001
E-MAIL : [email protected]
Telephone : 0191 3777345
MIN 43MAX 57
97
130
8666
MIN 20MAX 55
MIN 192
27
38
10 - 13
16
57 MIN 67 57 57
97
ø14
ø14
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 450 Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
3A
EC
301(H)
HH3/301
56A/N OR56A/S
104P
97
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale:
DESCRIPTION?_001PCH_CODE?_001SCALE?_001DWG_SIZE?_001REVISION?_001
E-MAIL : [email protected]
Telephone : 0191 3777345
MIN 43MAX 57
97
130
8666
MIN 20MAX 55
MIN 192
27
38
10 - 13
16
57 MIN 67 57 57
97
ø14
ø14
B240B
106R/97
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 400Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
53A/N OR 53A/S
HH3/301
1A/301
301
EC
97
11 20
MIN 154 76
20
97
MIN 32MAX 65
25
172
35
Ø14
27
38
10-13
MIN 43MAX 57
10225
MAX 900MAX 900
Description:
Drawing-size:Revision:
PCH-code:CAD-scale: E-MAIL: [email protected]
Telephone: 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/1A/53A/106R/97----A0A
SINGLE RUN TIMBER
NOT TO SCALE
H106/97 Guide
H97 Channel
H97 Channel
H104/97 Guide
H104PX/97 Guide
MIN 43MAX 57
38
38 38
10 to 13
10 to 13 10 to 13
H97 Channel
H102/97 Guide
25
24
35
20
97
97
79
130
110
152
86
95
66
33
33
60
603
39 79 44
66
66
16
16
25
172
32 to 65
20 to 55 32 to 65
20 to 55
MIN 43 MAX 57MIN 43 MAX 57
27
27 27
Ø14
Ø14
Ø14
H53A Hanger
H53A Hanger
H56A Hanger
H56A Hanger
H56AX Hanger
H1A/301 Bracket
H5A/301 Bracket
H3A/301 Bracket
H4A/301 Bracket
H6A/301 Bracket
H301 Track
MIN 43MAX 57
H299 Rail
H89 Channel
24
25 8
3550H97
Channel
H31D Guide
98 MAX(Adjustable
distance)
98 MAX(Adjustable
distance)
21
40
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B250
Straight Sliding 305For timber or metal top hung sliding doors. Max 700kg.appliCation
• Usedincommercial,industrialandagriculturalapplicationswhererobustgearisrequired• Designed to accomodate single or multiple panels on one or more tracks• Designed for interior and exterior applications• Versatile range of hanger, track, bracket and guide options, allows the 305 system a wide range of applications• Where doors are fitted externally, a canopy is recommended• Suitable for Fire Resistant applications
door SpeCiFiCation
track System 305
For Individual Doors:Max Door Wt Steel Hanger 700kgDoor Thickness 43-57mm*Max Door Height 4800mm
* For doors outside the recommended door thickness, please contact our technical sales team for further information.
h
H3A/305 - Bracket
H4A/305 - Bracket
H53C - HangerH52C - Hanger
H56C - Hanger
H56CX - Hanger
H56CF - Hanger H57C - Hanger
H9/305 - Bracket
H5/305 - Bracket
H1A/305 - Bracket
H4R/305 - Bracket
hardWare SpeCiFiCation
track H305 Galvanised Steel (2000, 2500, 3000, 4000 & 6000mm lengths)Fix spacing at 900mm centres (maximum)
Brackets H1A/305 Face fix aluminium, single trackH3A/305 Soffit fix aluminium, single trackH4A/305 Soffit fix (in line) aluminium, single trackH4R/305 Soffitfix(adjustable)steel,singletrackH5/305 Face fix aluminium, double track H9A/305 Face fix (low headroom) steel, single trackRefer to Components Section for closed and jointing bracket options
Fire door Brackets
H1/305 Face fix cast iron, single trackH1/305L Face fix cast iron closed left, single trackH1/305R Face fix cast iron closed right, single trackH1X/305 Facefixcastironjointing,singletrack
hangers (2 per door)*
H52C/S Timber doors - angle plate fixingH53C/S Timber doors - apron fixingH56C/S Metal doors – angle frameH56CX/S Metal doors – box frameH57C/S Timber/metal doors - concealed fixing
* Each panel must be rigid enough to be supported by only two hangers
guides H31D Wall guide, doubleH31S Wall guide, singleH102/97 Timber doorsH104P/97 Metal doors – angle frameH104PX/97 Metal doors – box frameH106/97 Timber doors – concealed fixingH126H Ground stay rollerH128 Shoe guide
All steel parts are electro zinc-plated.
Channels H89 Galvanised steel (2000, 3000 & 4000mm lengths)H97 Galvanised steel (2000, 3000, 4000 & 6000mm lengths)
rail H299 Galvanised steel (2000, 2500 & 3000mm lengths) H102/97 - Guide
H104P/97 - Guide
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
741424
A
A4----
128 GUIDE
137
89
45
�14
19
H128 - Guide H31S - GuideH31D - Guide
H104PX/97 - Guide
H106R/97 - Guide
H126H - Guide
H305 - Track
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 700Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
5A
305
53A
106R
97
109
27
38
38
155
241
189
48 92
11 20
102
75 75 75
76MIN 94
25
310-13
MAX 32MIN 65
MIN 43MAX 57
3
30
175
MAX 900MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
305 - STRAIGHT SLIDING
305/5A/53C/106R/97----A0A
DOUBLE RUN TIMBER
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 700Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
3A
305
56C
104P
97
109
MIN 43MAX 57
168
114
57
93
20-50
MIN 94
21
27
38
10 - 13
16
75 75 75MAX 900 MAX 900
66
125
�18
70
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
305 - STRAIGHT SLIDING
305/3A/56C/104P/97----A0A
SINGLE RUN STEEL
B250B
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 700Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
1A
305
53C
106R
97
109
25
310-13
27
38
25
140
229
84
5637
92
MIN32
MAX 65
MIN43MAX 57
11 20
102
75 75 75
76MIN 94
MAX 900 MAX 900
3
175
Ø16
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
305 - STRAIGHT SLIDING
305/1A/53C/106R/97----A0A
SINGLE RUN TIMBER
NOT TO SCALE
H106R/97 Guide
H97 Channel
MIN 43MAX 57
MIN 43MAX 57
10 to 133
92
70
84
56
56
93
92
3
48
38
66
16
37
25
3
140
168 189
114
241
155
229
32 to 65
27
25
38
32 to 65
32 to 65
H53C Hanger
H56C Hanger
H1A/305 Bracket
H3A/305 Bracket
H305 Track
H53C Hanger
H5A/305 Bracket
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 350 OR 450Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
6A
EC
301(H)
HH3/301
56A/N OR 56A/S
104P
97
79
152
MIN 43MAX 57
95
16
66
MIN 20MAX 55
24
10 - 13
127 127 127
MIN 192
MAX 900
Ø11
92
79
86
38
27
38
27
MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/6A/56A/104P/97
----A0A
DOUBLE RUN STEEL
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 450 Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
3A
EC
301(H)
HH3/301
56A/N OR56A/S
104P
97
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale:
DESCRIPTION?_001PCH_CODE?_001SCALE?_001DWG_SIZE?_001REVISION?_001
E-MAIL : [email protected]
Telephone : 0191 3777345
MIN 43MAX 57
97
130
8666
MIN 20MAX 55
MIN 192
27
38
10 - 13
16
57 MIN 67 57 57
97
ø14
ø14
H97 Channel
H104/97 Guide
H104PX/97 Guide
38 38
10 to 13 10 to 13
24
27 27Concrete Lug
H56CX/S Hanger
H4A/305 Bracket
H56CX/S Hanger
H9A/305 Bracket
H299 Rail
H89 Channel
24
25 8
3550H97
Channel
H31D Guide
98 MAX(Adjustable
distance)
98 MAX(Adjustable
distance)
21
40
H126H Guide 62
ISSU
E 1-
0314
HE
ND
ER
SO
Nstraight sliding top hung systems
B260
Straight Sliding 307For timber or metal top hung sliding doors. Max 2000kg.appliCation
• Designed to allow very heavy and large industrial doors to be easily moved• Designed to accomodate single or multiple panels on one or more tracks• Versatile range of hanger, track, bracket and guide options, allows the 307 system to be used in a wide range of applications• Where doors are fitted externally, a canopy is recommended
door SpeCiFiCation
track System 307
For Individual Doors:Max Door Weight 2000kgDoor Thickness 50-70mm*Max Door Height 6000mm
* For panels thicker than 70mm, please contact our technical sales team for further information.
h
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
217
67
MIN
94 M
AXM20
55
n88
1674
7576
76
390
60
----A4A
53FJ HANGER505244
H3/307S - Bracket
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
748489
A4
A
56FJ HANGER
----
217 55
90
�87
M20
H56FJ - Hanger
H1/307S - Bracket
P.C.HENDERSON LIMITED, BOWBURN, DURHAM DH6 5NG ENGLANDTelephone: (0191) 3770701 Fax No.: (0191) 3771309
................................................................www.pchenderson.com
Drawing-size:
PCH-code:
CAD-scale:
Revision:
Description:
M20
141
217
245
55
158
748506
A4A
56FJX HANGER
----
H56FJX - Hanger
H4/307S - Bracket H4R/307S - Bracket
H9/307S - Bracket
H53FJ - Hanger
H5/307S - Bracket
hardWare SpeCiFiCation
track H307 Steel Zinc Plated (2000, 3000 & 4000mm lengths)Fix spacing at 900mm centres (maximum)
Brackets H1/307S Face fix steel, single trackH3/307S Soffit fix steel, single trackH4/307S Soffit fix (in line) steel, single trackH4R/307S Soffitfix(adjustable),singletrackH5/307S Face fix steel, double trackH9/307S Restricted headroom face fix steelRefer to Components Section for closed and jointing bracket options
hangers (2 per door)
H53FJ Timber doors - apron fixingH56FJ Metal doors - angle frameH56FJX Metal doors - box frame
guides H31D Wall guide, doubleH31S Wall guide, singleH102/97 Timber doorsH104P/97 Metal doors – angle frameH104PX/97 Metal doors – box frameH106/97 Timber doors – concealed fixingH126H Ground stay rollerH128 Shoe guide
All steel parts are electro zinc-plated.
Channels H89 Galvanised steel (2000, 3000 & 4000mm lengths)H97 Galvanised steel (2000, 3000, 4000 & 6000mm lengths)
rail H299 Galvanised steel (2000, 2500 & 3000mm lengths)
H104P/97 - Guide
H104PX/97 - Guide
H102/97 - Guide
H106R/97 - Guide
H97 - ChannelH31S - GuideH31D - Guide
H126H - Guide
H307 - Track
ISSU
E 1-
0314
ASSA ABLOY New Zealand Ltd. PO Box 100407, North Shore, Auckland 0745 • 6 Armstrong Road, Albany, Auckland 0632, New ZealandWithin New Zealand: Tel 09 415 8031 Fax 0800 478 297 www.assaabloy.co.nz • Outside New Zealand: Tel +64 9 921 7630 Fax +64 9 415 7222 www.assaabloy.co.nz
HE
ND
ER
SO
N
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 2000Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
307
56FJ
104P
97
4S
109
MIN 94
181
158104
91
MIN 25MAX 55
12
10-13
27
38
184184184
20
27
MIN 60MAX 70
91
24
7375
134
89
�18
MAX 900MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
307 - STRAIGHT SLIDING
307/4S/56FJ/104P/97----A0A
DOUBLE RUN STEEL
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 2000Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
5S
307
53FJ
106R
97
109
27
38
218
73
42
192
297
90 90 90
253
10-13
MIN 50MAX 80
4691
Ø22
9175
MIN 60MAX 70
104
102
MAX 900MAX 900
MIN 94
379
65
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
307 - STRAIGHT SLIDING
307/5S/53FJ/106R/97----A0A
DOUBLE RUN TIMBER
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 2000Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
307
56FJ
104P
97
3S
109
MIN 94
184
91
158104
134
MIN 25MAX 55
12
10-13
27
38
MAX 900 MAX 900
909090
20
MIN 60MAX 70
90
134
�18
7375
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
307 - STRAIGHT SLIDING
307/3S/56FJ/104P/97----A0A
SINGLE RUN STEEL
B260B
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF TIMBER DOOR WEIGHT MAX 2000Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
1S
307
53FJ
106R
97
109
25
310-13
27
38
92
24
159
253
MIN 50MAX 80
MIN 94
17
17
65
75 75 75
5
MIN 60MAX 70
46
380
102
MAX 900 MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
307 - STRAIGHT SLIDING
307/1S/53FJ/106R/97----A0A
SINGLE RUN TIMBER
NOT TO SCALE
H106R/97 Guide
H97 Channel
MIN 60MAX 70
MIN 60MAX 70
92
91
91
20
91
91
91
73
73
73
20
159192
158
158
104
104
104
184
181
134
253
218
297
5
24
4646
42
50 to 80
50 to 80
25 to 55
25 to 55
H53FJ/S Hanger
H56FJX Hanger
H56FJ/S Hanger
H4/307S Bracket
H53FJ/S Hanger
H1/307S Bracket
H3/307S Bracket
25
3
27
38
10 to 13
H307 Track
Ø22
H5/307S Bracket
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 350 OR 450Kg.3. ALL DIMENSIONS ARE IN MILLIMETER.
6A
EC
301(H)
HH3/301
56A/N OR 56A/S
104P
97
79
152
MIN 43MAX 57
95
16
66
MIN 20MAX 55
24
10 - 13
127 127 127
MIN 192
MAX 900
Ø11
92
79
86
38
27
38
27
MAX 900
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale: E-MAIL : [email protected]
Telephone : 0191 3777345
301(H) - STRAIGHT SLIDING
301(H)/6A/56A/104P/97
----A0A
DOUBLE RUN STEEL
NOTES:1. DRAWING IS FOR REFERENCE AND SUBJECT TO CHANGE WITHOUT NOTICE.2. APPLICATION IS OF METAL DOOR WEIGHT MAX 300 OR 450 Kg.3. ALL DIMENSIONS ARE IN MILLIMETERS.
3A
EC
301(H)
HH3/301
56A/N OR56A/S
104P
97
Description:
Drawing-size:
Revision:
PCH-code:
CAD-scale:
DESCRIPTION?_001PCH_CODE?_001SCALE?_001DWG_SIZE?_001REVISION?_001
E-MAIL : [email protected]
Telephone : 0191 3777345
MIN 43MAX 57
97
130
8666
MIN 20MAX 55
MIN 192
27
38
10 - 13
16
57 MIN 67 57 57
97
ø14
ø14
H97 Channel
H104/97 Guide
H104PX/97 Guide
38 38
10 to 13 10 to 13
24
27 27Concrete Lug
H299 Rail
H89 Channel
24
25 8
3550H97
Channel
H126H Guide 62
H31S Guide
98 MAX(Adjustable distance)
21
40
ISSU
E 1-
0314