— ABB Automation GmbH Measurement & Analytics Force Measurement Oberhausener Str. 33 40472 Ratingen Germany Tel: +49 2102 12-2520 Fax: +49 2102 12-1414 Mail: [email protected] abb.com/measurement
DS/
9QG
PS20
00
S-EN
Rev
. A
02.
2018
— We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. © Copyright 2018 ABB All rights reserved 3BDE701050
— ABB MEASUREMENT & ANALYTICS | DATA SHEET
9QGPS2000S Hermetically sealed bending beam load cell
2 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 11
— Measurement made easy High-end load cell combining high accuracy with high resistance in harsh environment.
— Stainless steel
— IP rating IP 67 (welded sealing)
— Complies with OIML / R60 up to 3000d for scales in class III
— Standardized dimensions
— Cable length: 3 m (9.8 ft)
— Whole range of mounting kits available
— Available options (non exhaustive list) • ATEX intrinsic safety • High service temperature 150 °C (302 °F) • IP rating IP 68 • Amplified output (V or mA) and digital output signal
(RS-232C, RS-485)
9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 3
Change from one to two columns
— Applications
The load cell 9QGPS2000S is perfectly designed to the following applications: • OIML certified and industrial scales • Packaging, batching and filling machines • Reactors, tanks, vessel or hoppers weighing
— Capacities
10 - (15) - 20 - (30) - 50 - (75) - 100 - (150) - 200 - 300 kg
—
Explosion protection (Option)
ATEX intrinsic safety • Ex II 1GD Ex ia IIC T6 or T4 Ga Ex ia IIIC T80°C Da
Change from two to one column
—
Specification
A3 0.03 % C 3
Accuracy class 3000 d* 0.03 % F.S. 3000 d OIML
Repeatability error < ±0.015 % F.S. < ±0.015 % F.S. < ±0.01 % F.S.
Creep error over 30 min. < ±0.03 % F.S. < ±0.025 % F.S. < ±0.02 % F.S.
Sensitivity tolerance < ±0.2 % < ±0.2 % < ±0.1 %
Temperature coefficient of the sensitivity < ±0.1 % F.S./10 °C < ±0.015 % F.S./10 °C < ±0.009 % F.S./10 °C
Temperature coefficient of zero signal < ±0.005 % F.S./10 °C < ±0.023 % F.S./10 °C < ±0.013 % F.S./10 °C
Reference temperature 23 °C 23 °C 23 °C
Temperature data
Nominal temperature range −10 to 45 °C −10 to 45 °C −10 to 45 °C
Service temperature range −25 to 70 °C −25 to 70 °C −25 to 70 °C
Storage temperature range −50 to 85 °C −50 to 85 °C −50 to 85 °C
Electrical Data
Input resistance 352 Ω ±2 Ω 352 Ω ±2 Ω 352 Ω ±2 Ω
Output resistance 352 Ω ±2 Ω 352 Ω ±2 Ω 352 Ω ±2 Ω
Insulation resistance (50 V) > 5000 MΩ > 5000 MΩ > 5000 MΩ
Reference excitation voltage 10 V DC 10 V DC 10 V
Nominal range of excitation voltage 3 to 12 V DC 3 to 12 V DC 3 to 12 V
Zero balance ±0.02 mV/V ±0.02 mV/V ±0.02 mV/V
Nominal sensitivity 2 mV/V 2 mV/V 2 mV/V
Load limits
Safe load limit 150 % F.S. 150 % F.S. 150 % F.S.
Breaking load > 300 % F.S. > 300 % F.S. > 300 % F.S.
Static lateral force limit 100 % F.S. 100 % F.S. 100 % F.S.
Permissible dynamic loading 60 % F.S. 60 % F.S. 60 % F.S.
Table 1: F.S.: Full scale
* Except thermal drifts
4 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A
— Dimensions Load cell model 9QGPS2000S
All specified dimensions are in mm (in.)
R00001
A
B
min. 28
A B
CDE
F
Figure 1: Dimensions
Ref. Item Capacities kg (lb) A B C D E F L Ø A Ø B H1 H2 Ø M Max deflection Weight kg (lb)
2000S-A 10 to 300
(22 to 661)
40
(1.57)
23
(0.91)
10
(0.39)
82
(3.23)
18
(0.71)
20
(0.79)
120
(4.72)
26.7
(1.05)
42
(1.65)
78
(3.07)
56
(2.20)
8
(0.32)
0.2 to 0.3
(0.008 to 0.012)
0.48
(1.05)
Table 2: Other capacities and dimensions on request
Accessories
R00069
Wiring code
Load direction
- Exct. - Yellow (Jaune)
+ Sig. + Green (Vert)
- Sig. - White (Blanc)
+ Exct. + Brown (Brun)
Standard:Cable screen not connected to transducerFaradisation non connectée au capteur
-
+
-
+
�
FY+
FZ+ FX
+
Force
F2000S
E2000S
Embom
T2000ST2005S
M
Embof
I2000S
I2005SM
H2
Figure 2: Accessories
9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 5
Mounting accessories model F2000S (stainless steel)
For load cells 9QGPS2000S All specified dimensions are in mm (in).
R00004
1
3 (0.118) Ø 62,5 (2.46)
Ø 64 (2.52)
23
(0.9)
M
H+
H-
A
H1
C
1 Rubber
Figure 3: F2000S
Ref. Item Capacities kg (lb) A C M H- H+ H1
F2000-S-A 10 to 300 (22 to 661) 20.5 (0.81) 4 (0.16) 8 (0.32) 36 (1.42) 45 (1.77) 76.5 (3.01)
Table 3: Other capacities and dimensions on request
R00070 Figure 4: Other views
9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 5
Mounting accessories model F2000S (stainless steel)
For load cells 9QGPS2000S All specified dimensions are in mm (in).
R00004
1
3 (0.118) Ø 62,5 (2.46)
Ø 64 (2.52)
23
(0.9)
M
H+
H-
A
H1
C
1 Rubber
Figure 3: F2000S
Ref. Item Capacities kg (lb) A C M H- H+ H1
F2000-S-A 10 to 300 (22 to 661) 20.5 (0.81) 4 (0.16) 8 (0.32) 36 (1.42) 45 (1.77) 76.5 (3.01)
Table 3: Other capacities and dimensions on request
R00070 Figure 4: Other views
6 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A
—
— ...Dimensions
Easy mount model I2000S (stainless steel) and I2005S (alloy steel)
For load cells 9QGPS2000S All specified dimensions are in mm (in.)
R00071
11 (4.43)
(4x)
102
(4.02)70
(2.76)
16
(0.63)
70
(2.76)
16
(0.63)
46 (1.81) 132 (5.20)
13
(0.51)
82
(3.23)
13
(0.51)
56 (2.20)
42 (1.65)
M10
(2x)
39 (1.53)
76 (2.99)42
(1.65)
18
(0.71)
Figure 5: Easy mount
Ref. Item Capacities kg (lb)
I200xS-A 10 to 300 (22 to 661)
Table 4: Other capacities and dimensions on request
R00072
Radial installation Tangential installation Rectangular installation
Figure 6: Other views
9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 7
Compression ball joint model R2000S (stainless steel)
For load cells 9QGPS2000S All specified dimensions are in mm (in.)
R00073
17,5 (0.69)
18,5 (0.73)
29 (1.14)
M16
A
A
8 (0.32)
23,5 (0.93)
18 (0.71) 12 (0.47)M5
A A
DIN 127 A 5 (0.2)
DIN 933 M5 X L12 Figure 7: Compression ball joint
Ref. Item Capacities kg (lb)
R2000S-A 10 to 300 (22 to 661)
Table 5: Other capacities and dimensions on request
R00074
43,5 (1.71)
61 (2.40)
Figure 8: Other views
8 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A
—
— ...Dimensions Tension accessories model T2000S (stainless steel) and T2005S (alloy steel)
For load cells 9QGPS2000S All specified dimensions are in mm (in.)
R00075
58 (2.28)
48 (1.89)
10 (0.39)
59
(2.32)
78
(3.07)
23 (0.91)
25 (0.98)
85 (3.35)
76 (2.99)
20
(0.79)
20
(0.79) 40
(1.57)
82
(3.23)
M8
(4x)
5x45°
14
(0.55)10
(0.39)
18 (0.71)
14
(0.55)
59
(2.32)
2 (0.08)
31
(1.22)29
(1.14)
38
(1.50)
Figure 9: Tension accessories
Ref. Item Capacities kg (lb)
T200xS-A 10 to 300 (22 to 661)
Table 6: Other capacities and dimensions on request
Figure 10: Other views
9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 9
— Notes
2 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 11
— Measurement made easy High-end load cell combining high accuracy with high resistance in harsh environment.
— Stainless steel
— IP rating IP 67 (welded sealing)
— Complies with OIML / R60 up to 3000d for scales in class III
— Standardized dimensions
— Cable length: 3 m (9.8 ft)
— Whole range of mounting kits available
— Available options (non exhaustive list) • ATEX intrinsic safety • High service temperature 150 °C (302 °F) • IP rating IP 68 • Amplified output (V or mA) and digital output signal
(RS-232C, RS-485)
10 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A
— Notes
2 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 9QGPS2000S HERMETICALLY SEALED BENDING BEAM LOAD CELL | DS/9QGPS2000S-EN REV. A 11
— Measurement made easy High-end load cell combining high accuracy with high resistance in harsh environment.
— Stainless steel
— IP rating IP 67 (welded sealing)
— Complies with OIML / R60 up to 3000d for scales in class III
— Standardized dimensions
— Cable length: 3 m (9.8 ft)
— Whole range of mounting kits available
— Available options (non exhaustive list) • ATEX intrinsic safety • High service temperature 150 °C (302 °F) • IP rating IP 68 • Amplified output (V or mA) and digital output signal
(RS-232C, RS-485)
— ABB Automation GmbH Measurement & Analytics Force Measurement Oberhausener Str. 33 40472 Ratingen Germany Tel: +49 2102 12-2520 Fax: +49 2102 12-1414 Mail: [email protected] abb.com/measurement
DS/
9QG
PS20
00
S-EN
Rev
. A
02.
2018
— We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. © Copyright 2018 ABB All rights reserved 3BDE701050
— ABB MEASUREMENT & ANALYTICS | DATA SHEET
9QGPS2000S Hermetically sealed bending beam load cell
www.abb.com/measurement