Date post: | 28-Mar-2016 |
Category: |
Documents |
Upload: | cie-de-colombia-sa |
View: | 215 times |
Download: | 0 times |
Global BrandLocal Service
Hydraulic Workshop Toolsfor
Truck, Bus, Construction and Heavy Plant Vehicles
Other heavy plant vehicle tools
The Hi-Force ToughLift jacking system offers users the easiest and safest method of lifting material haulers in the mining and construction industry and locomotives in the railway industry, when critical maintenance and breakdown repair work requires completion.
Choice of 50, 100, 150 or 200 tonne lifting capacities
Patented multi-positional lifting handle for easy transportation and positioning
Available with choice of electric or air driven hydraulic pump unit
Patented jacking system for safe and correct positioning prior to load lift
Wide range of accessories available for even greater versatility
Narrow width, with small footprint for easy access into confined space
Large diameter, heavy duty wheels for easy positioning underneath the load
The Hi-Force range of bead breakers is used to break tyre beads on small trucks and large earthmovers. They break beads in seconds with no rim damage and are compatible for use with Hi-Force 700 Bar hand and powered pumps.
GTB - Giant Bead Breaker
Suitable for use on 5 piece rims 25” to 51” (635 to 1295 mm)
14 tonnes capacity with a nett weight of 12.5kgs
PTB - Combi Bead Breaker
Suitable for use on all single, two & three-piece 2-5-10hold budd, 7.50 x 16s & all tubeless truck tyres & rims
11 tonnes capacity with a nett weight of 15.5kgs
HI-FORCE TOUGHLIFT JACKING SYSTEM
Hi-FORCE GIANT & COMBI BEAD BREAKERS
UK Head Office:Hi-Force Limited, Prospect Way, Daventry, NN11 8PLTel: +44 1327 301 000 Fax: +44 1327 706 555
For more information on these andother Hi-Force products, please visit
www.hi-force.com
The Hi-Force HBR-1 spring eye bush replacement kit is offered with a choice of manual or air powered hydraulic pump unit, or it can be supplied without a pump, should the user already have a suitable 700 bar pump within his tool store. All models offer a superb 18 tonnes of hydraulic power, when operated at the maximum working pressure of 700 bar. This innovative new product from Hi-Force is primarily targeted at commercial vehicle manufacturers and service centres, as well as heavy plant vehicle workshops, where traditional hammer and heat methods of bush replacement activities have proved unsafe, time consuming and costly. All kits incorporate a standard Hi-Force HHA182 lightweight, aluminium hydraulic cylinder making the kit portable and easy to fit to a wide variety of bush replacement applications. Supplied in a smart metal storage case for easy transportation and storage, all kits include a range of standard tooling with non standard and special tooling available on request.
HBR-1 - SPRING EYE BUSH REPLACEMENT KIT
Bushes replaced directly on the vehicle
Safe, simple and easy to operate
Portable and powerful hydraulic operation
Modelnumber
Stroke mm
Complete set comprising of
Capacitytonnes
Pump options
AHP1120 HP212
HBR-1
HBR-1HHBR-1A
18
1818
51
5151
Cylinder Pump HoseBaseplate
Threaded rods Dolley’s
Pull sleeves
HHA182
HHA182HHA182
n/a
HP212AHP1120
n/a
HC2HC2
1
11
3
33
5
55
2
22
Offers time & labour savings of up to 60%
Lightweight & compact design for easy transportation
Minimal manual effort during operation
Improved safety over traditional methods
Modelnumber
HPR - PIN & BUSH REPLACEMENT TOOL KITS
The Hi-Force HPR range, of pin and bush replacement kits, is offered with a choice of 37 tonnes or 50 tonnes capacity options, both available with either a manual or air driven hydraulic pump unit. Both the HPR-1 & the HPR-2 can also be supplied without a hydraulic pump for those users that already have a suitable 700 bar pump available within their tool store. All models operate at 700 bar maximum working pressure and incorporate either a standard HHA372 37 tonne capacity or a HHA504 50 tonne capacity, lightweight, aluminium hydraulic cylinder. This innovative new product from Hi-Force is targeted at manufacturers, service centres and users of heavy plant vehicles, used in the construction and mining industries. Supplied in a smart metal storage case for easy transportation and storage, all kits include a range of standard tooling with non standard and special tooling available on request.
Safe, simple, hands free operation
Offers time & labour savings of up to 60%
Ideal for use on site and in the workshop
Flexible and adaptable system
Improved safety over traditional methods
Suitable for a wide range of pin & bush applications
Multi-purpose aluminium hollow piston cylinder
Pump options
AHP1120
HP212
HPR-1HPR-1H
HPR-1AHPR-2
HPR-2H
HPR-2A
Capacitytonnes
3737
37
50
50
50
Stroke mm
5151
51
104
104
104
Complete set comprising of
CylinderReducersleeves
HHA372
HHA372HHA372
1
11
HHA504
HHA504HHA504
Pump
n/a
HP212AHP1120
n/a
HP212AHP1120
Base plate
1
112
22
Threaded rods
1
111
11
Pull sleeves
2
224
44
Adaptors
2
222
22
1
11
Hose
n/a
HC2HC2n/a
HC2HC2
The HBR-1 hydraulic spring eye bush replacement tool kit can be operated by either the AHP1120 air driven foot pump or the HP212 lightweight aluminium hand pump.
The HPR hydraulic pin & bush replacement tool kits can be operated by either the AHP1120 air driven foot pump or the HP212 lightweight aluminium hand pump.
The Hi-Force HBR-1 spring eye bush replacement kit is offered with a choice of manual or air powered hydraulic pump unit, or it can be supplied without a pump, should the user already have a suitable 700 bar pump within his tool store. All models offer a superb 18 tonnes of hydraulic power, when operated at the maximum working pressure of 700 bar. This innovative new product from Hi-Force is primarily targeted at commercial vehicle manufacturers and service centres, as well as heavy plant vehicle workshops, where traditional hammer and heat methods of bush replacement activities have proved unsafe, time consuming and costly. All kits incorporate a standard Hi-Force HHA182 lightweight, aluminium hydraulic cylinder making the kit portable and easy to fit to a wide variety of bush replacement applications. Supplied in a smart metal storage case for easy transportation and storage, all kits include a range of standard tooling with non standard and special tooling available on request.
HBR-1 - SPRING EYE BUSH REPLACEMENT KIT
Bushes replaced directly on the vehicle
Safe, simple and easy to operate
Portable and powerful hydraulic operation
Modelnumber
Stroke mm
Complete set comprising of
Capacitytonnes
Pump options
AHP1120 HP212
HBR-1
HBR-1HHBR-1A
18
1818
51
5151
Cylinder Pump HoseBaseplate
Threaded rods Dolley’s
Pull sleeves
HHA182
HHA182HHA182
n/a
HP212AHP1120
n/a
HC2HC2
1
11
3
33
5
55
2
22
Offers time & labour savings of up to 60%
Lightweight & compact design for easy transportation
Minimal manual effort during operation
Improved safety over traditional methods
Modelnumber
HPR - PIN & BUSH REPLACEMENT TOOL KITS
The Hi-Force HPR range, of pin and bush replacement kits, is offered with a choice of 37 tonnes or 50 tonnes capacity options, both available with either a manual or air driven hydraulic pump unit. Both the HPR-1 & the HPR-2 can also be supplied without a hydraulic pump for those users that already have a suitable 700 bar pump available within their tool store. All models operate at 700 bar maximum working pressure and incorporate either a standard HHA372 37 tonne capacity or a HHA504 50 tonne capacity, lightweight, aluminium hydraulic cylinder. This innovative new product from Hi-Force is targeted at manufacturers, service centres and users of heavy plant vehicles, used in the construction and mining industries. Supplied in a smart metal storage case for easy transportation and storage, all kits include a range of standard tooling with non standard and special tooling available on request.
Safe, simple, hands free operation
Offers time & labour savings of up to 60%
Ideal for use on site and in the workshop
Flexible and adaptable system
Improved safety over traditional methods
Suitable for a wide range of pin & bush applications
Multi-purpose aluminium hollow piston cylinder
Pump options
AHP1120
HP212
HPR-1HPR-1H
HPR-1AHPR-2
HPR-2H
HPR-2A
Capacitytonnes
3737
37
50
50
50
Stroke mm
5151
51
104
104
104
Complete set comprising of
CylinderReducersleeves
HHA372
HHA372HHA372
1
11
HHA504
HHA504HHA504
Pump
n/a
HP212AHP1120
n/a
HP212AHP1120
Base plate
1
112
22
Threaded rods
1
111
11
Pull sleeves
2
224
44
Adaptors
2
222
22
1
11
Hose
n/a
HC2HC2n/a
HC2HC2
The HBR-1 hydraulic spring eye bush replacement tool kit can be operated by either the AHP1120 air driven foot pump or the HP212 lightweight aluminium hand pump.
The HPR hydraulic pin & bush replacement tool kits can be operated by either the AHP1120 air driven foot pump or the HP212 lightweight aluminium hand pump.
Global BrandLocal Service
Hydraulic Workshop Toolsfor
Truck, Bus, Construction and Heavy Plant Vehicles
Other heavy plant vehicle tools
The Hi-Force ToughLift jacking system offers users the easiest and safest method of lifting material haulers in the mining and construction industry and locomotives in the railway industry, when critical maintenance and breakdown repair work requires completion.
Choice of 50, 100, 150 or 200 tonne lifting capacities
Patented multi-positional lifting handle for easy transportation and positioning
Available with choice of electric or air driven hydraulic pump unit
Patented jacking system for safe and correct positioning prior to load lift
Wide range of accessories available for even greater versatility
Narrow width, with small footprint for easy access into confined space
Large diameter, heavy duty wheels for easy positioning underneath the load
The Hi-Force range of bead breakers is used to break tyre beads on small trucks and large earthmovers. They break beads in seconds with no rim damage and are compatible for use with Hi-Force 700 Bar hand and powered pumps.
GTB - Giant Bead Breaker
Suitable for use on 5 piece rims 25” to 51” (635 to 1295 mm)
14 tonnes capacity with a nett weight of 12.5kgs
PTB - Combi Bead Breaker
Suitable for use on all single, two & three-piece 2-5-10hold budd, 7.50 x 16s & all tubeless truck tyres & rims
11 tonnes capacity with a nett weight of 15.5kgs
HI-FORCE TOUGHLIFT JACKING SYSTEM
Hi-FORCE GIANT & COMBI BEAD BREAKERS
UK Head Office:Hi-Force Limited, Prospect Way, Daventry, NN11 8PLTel: +44 1327 301 000 Fax: +44 1327 706 555
For more information on these andother Hi-Force products, please visit
www.hi-force.com