HeyTec Composites
Nano Hybrid Composite
Nano Ceramic Composite
Micro Hybrid Composite
Flow Composite
Flow Composite, selfetching
Bond, 5. and 7. generation
Made in Germany!
Restorative
Materials
HeyTec
HeyTec Composites
Heydent is proud to present top leading composite materials (Nano Hybrid to Micro
Hybrid). Each of them has different features, but together they have one thing in
common all are „Made in Germany“
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
HeyTec M
HeyTec NC
HeyTec N
The Microhybrid classic for the daily use
The mechanically and esthetically improvedversion of Nano Ceramic Composites
THE Nano Hybrid Composite of the latestgeneration with the predominance of nano fillers
1.5 μm (1500 nm)
0.9 μm (900 nm)
0.05 μm (50 nm)
HeyTec
HeyTec N
Nano Hybrid Composite HeyTecN is so convenient and easy to form, that its
consistency is called „Waxlike”! HeyTecN enables the dentist to create
highly aesthetic restorations with mechanical properties that guarantee the
longterm reliable results.
HeyTecN impresses every user. The unique "waxlike"
consistency guarantees a very comfortable and easy
handling of HeyTecN. The material does not stick to the
instruments!
Thanks to its excellent resistance to compression,
HeyTecN is able to withstand high loads on both
occlusal and incisal surfaces! Furthermore, HeyTecN
has an unusually low solubility in water (more than 7
times lower than the ISO standard)! HeyTecN is ideal
for longterm aesthetic restorations.
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
"WAX LIKE CONSISTANCY"
MEANS MORE COMFORT FOR THE DENTIST"
WAXHeyTec-N
likeT H E C o m p o s i t e
< 1
< 7.5
HeyTecN ISO Standard
μg/mm
3
The water solubility index of HeyTecN is more than 7 times lower than the ISO standard
* Manufacturer's survey, Germany
Wear resistance of HeyTecN and competitors (200,000 cycles ~ approx. One year) *
< 1
4444
65
38
HeyTecN Tetric Evo Ceram(Ivoclar Vivadent)
Ceram X(Dentsply)
Venus(Heraeus Kulzer)
μg/mm
3
* Manufacturer's survey, Germany
LONGTERM AESTHETIC FILLINGS
Studies on abrasive wear show that
HeyTecN achieved one of the best results
among its competitors. After 200,000 cycles
the surface of the filling shows only 38μmwear. HeyTecN restorations are extremely
durable and safe for the opposite teeth.
ABRASIVE WEAR RESISTANCE
CLINICAL CASEPatient with Diastema
before after
HeyTec
HeyTec NC
In addition to the very good aesthetic advantages, there are also excellent
mechanical properties that both existing and new users appreciate. All of this
makes HeyTecNC the ideal material, both for the front and the side tooth
area.
HeyTec NC is a ceramiclike filling material with organic and inorganic particles,
using nanotechnology. It can be used universally, in the front and lateral area.
The excellent handling with the optimized material properties such as low
polymerisation shrinkage, improved abrasion ability and perfect polishability,
inspires every dentist
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
ADVANTAGES
CLINICAL PICTURES
HeyTec-NCNano Ceramic Technologiy
High radiopacity
< 1
200
100
>200
HeyTecN Enamel Dentine
%Al abrasion resistance
low shrinkage
"Chameleon effect" for excellent aesthetics
easy polishing and long lasting shine
comfortable modeling with nonsticky effect
wide range of applications
secondary caries lesion finished compositerestoration
caries lesion removed
HeyTec-NCNano Ceramic Technology
HeyTec
HeyTec M
HeyTecM is the favored microparticle hybrid composite material on
the market, which excites at its daily use in dental practices
throughout the world!
Aesthetic appearance, even under artificial light sources.
Highest abrasion resistance due to particularly dense filler
structure with particle sizes of 0.05 1.5 μm.Particularly good modelability and high polishability.
Transparency and translucency are adapted to the natural tooth
substance.
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
ADVANTAGES
CLINICAL PICTURES
HeyTec-MClassic microhybrid technology
Recent studies with HeyTecM show a very
low rate of water absorption.
General ISO standards for composites require
an index of less than 40 g / mm3. HeyTecM
has been rated 4 times lower!
For this reason HeyTecM restorations show
excellent color stability and mechanical
durability.
removed caries lesion finished composite restoration
10
40
HeyTecM ISO Standard
μg/mm
3
The water solubility index of HeyTecM is 4 times lower than the ISO standard
* Manufacturer's survey, Germany
HeyTec Flow SE
HeyTec Flow
HeyTec Flow SE is a selfetching, lightcuring, flowable composite
which is used for a variety of indications in restorative therapy.
HeyTec Flow SE does not require etching, priming and bonding of
enamel and dentin. The treatment time is thus much shorter than with
the conventional flow and possible application errors are excluded!
Postoperative sensitivities are reduced.
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
all in oneThe low wear of the filler material is essential for clinical
success. The wear of HeyTec Flow SE after 200,000
cycles is only 57um.
HeyTec Flow SE guarantees longlasting restorations!
baseliner for deep cavities
fissure sealant
small restorations, class 1 and 2
milk tooth restorations
melting corrections
bBlock out and fill undercuts
provisional corrections
Indications for HeyTec Flow SE and HeyTec Flow
Proven and popular flowable microhybrid composite. Designed for
small cavities, fissure sealing and baseline material. Thanks to the
optimum consistency, HeyTec Flow adapts perfectly to the cavity
walls.
e t c h i n gp r i m i n gb o n d i n gf i l l i n g
Wear of HeyTec Flow SE and competitors (200,000 cycles durationapprox. 1 year) *
85
57
HeyTec Flow SE Vertis Flow(Kerr)
* Manufacturer's survey, Germany
μg/mm
HeyTec Adhesives
HBond and HBond Activator
Small amount ofHEtchbond on a smallbowl
HEtchbond
Gen e r a t i o nG e n e r a t i o n
Lightcuring onecomponent, singlelayer bonding system of the seventh generation!
Developed to simplify the bonding procedure, while ensuring excellent quality and strong
bonding.
Gen e r a t i o n7
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
Amongst the most popular selfetch systems, HEtchbond is characterized by its outstanding adhesion
properties. Only one layer of HEtchbond is required to obtain a strong and longlasting bond of lightcuring
composites to enamel and dentin. *
HBOND is a lightcuring system of the Prime / Bond type of the 5th generation and offers a strong bond of
all composite materials to dentin and enamel! HBOND has been developed for lightcuring materials, but
when combined with HBOND Activator, HBOND becomes a chemically or dualcuring system that is
perfect for root canals! It can also be used with chemically and doubly hardening materials.
Adhesion strength on enamel (MPa) *
20,7
19
24,824
HEtchbond Clearfil SE Bond(Kuraray)
GBond(GC)
IBond(Heraeus Kulzer)
MPa
* Manufacturer's survey, Germany
One of the strongest bonds test and compare!
One procedure, in 50 seconds
Adhesion strength on dentin (MPa) *
< 1
21,520,62222
HEtchbond Clearfil SE Bond(Kuraray)
GBond(GC)
IBond(Heraeus Kulzer)
MPa
* Manufacturer's survey, Germany
Thorough application ofHEtchbond on moist enamel/dentin (30 seconds)
Dry 10 seconds with air to removeexcess HEtchbond
Polymerization ofHEtchbond with10 seconds.
Earlier generations of bonding systems required the use of several components / processes. With
HEtchbond, all processes, etching, priming and bonding are carried out in one step.
Packaging
HeyTecN
HeyTecNC
HeyTecM
HeyTecFlow SE
HeyTecFlow
HBOND
HETCHBOND
HBOND Activator
Heydent GmbHViktor Frankl Str. 20, 86916 KauferingGermanywww.heydent.com
1x syringe a 4g
20 x capsules a 0.3g
Set: 8x syringe a 4g (colors freely selectable)
Set: 8x syringe a 4g with HBond (colors freely selectable)
Set: 8x syringe a 4g with HEtchbond (colors freely selectable)
Trial set 5x syringes a 1g (various colors)
Trial set 5x capsules a 0,3g (various colors)
1x syringe a 5g
20 x capsules a 0.3g
Set: 8x syringes a 5g (colors freely selectable)
Set: 8x syringe a 5g with HBond (colors freely selectable)
Set: 8x syringes a 5g with HEtchbond (colors freely selectable)
Trial set 5x syringes a 1g (various colors)
Trial set 5x capsules a 0,3g (various colors)
1x syringe a 5
Set: 8x syringes a 5g (colors freely selectable)
Set: 8x syringe a 5g with HBond (colors freely selectable)
Set: 8x syringes a 5g with HEtchbond (colors freely selectable)
Trial set 5x syringes a 1g (various colors)
1x syringe a 2ml (3g)
1x bottle a 5ml
1x bottle a 5ml
1x bottle a 5ml1x syringe a 2ml (3g)
Set: 8x syringes a 4g incl HEtchbond
Trial Set 5x syringes a 1g