HF-525 Plus General Radiographic X-ray System
Fit for purpose, Easy to use. HF-525 Plus is a compact, cost-efficient radiography workplace based on a cassette catapult bucky. As a reliable, easy-to-use solution, HF-525 Plus is especially suited for all acquisitions of skeletal radiography of the recumbent and seated patient:
HF-525 Plus includes : High frequency 50kW
generator (optional 65 and 80kW generator available)
Floor mounted tube stand Ceiling suspension for tube
stand (Optional)
4 way floating table Elevating 6 way top floating
table (Optional)
AEC/DAP available (optional)
Ceiling suspension (optional)
Dose Efficiency : X-ray quantum detection efficiency is a measure of the percentage of X-rays that hit the detector that are absorbed. Systems with higher quantum efficiency can produce higher quality images, at lower dose.
Robust Design & Technology : HF-525 Plus provides high level conveniences for operators who handle the tube and table positions with different examination. With intelligent positioning mechanism
4 way floating or 6 way elevation bucky table
Tube stand (floor mounted)
Operation Console
Type : Microprocessor control & Digital
display
Indication meter : kV, mA, mAs, msec,
DAP value
mA setting : 10 ~ 800mA (1,000mA
available with 80kW generator)
kV setting : 40 ~ 150kV
Time setting : 1 msec ~ 6.3 sec
mAs value : 0.1 ~ 500 mAs
Anatomical mode (APR)
AEC function (optional) – with 3 field
ionization chambers
Generator 50/65/80kW
Dimensions : 430 x 330 x 100mm
Weight : 6kg (approx.)
High Frequency Generators
50kW/65kW Generator Type High Frequency Inverter Generator Line Power 380V, 50/60Hz, Three phase Output frequency 40kHz Rated output power Maximum 50/65kW (100kV / 500mA / 630mA at 0.1s) Dual Rotor supply Low & high speed Self-diagnostic function Automatic Over load, Error code display High Voltage Transformer type Full-wave rectification type
Optional • One or Two ionization chamber • DAP Meter
80kW Generator (150kV / 1000mA / 500mAs) Line Power 380V, 50/60Hz, Three phase Output frequency 300kHz Rated output power Maximum 80kW (100kV / 800mA at 0.1s, 1,000mA@80kV ) Dual Rotor supply Low & high speed High Voltage Transformer type Full-wave rectification type
Optional • One or Two ionization chamber • DAP Meter
Tube & Tube stand
Category Specifications
Tube
E7252X Focal spots : 0.6mm small (27kW)
1.2mm large (75kW) Anode heating unit : 300kHU Max. kV : 150kV Housing heat unit : 1250kHU
Tube stand
Type : Floor mounted with counter balanced. Electromagnetic locks Travel ranges : Longitudinal : 180cm Vertical : 149cm (40 to 189cm from the floor level) Transverse : 24cm Tube arm angle :
Horizontal axis : -90 ~ +90
Vertical axis : -90 ~ +90 LCD screen to display tube angle status.
Collimator
Type : manual Filtration : 0.1/0.2mm cooper & Aluminum – auto choice available by APR Exposure area to be identified through halogen light
Radiographic Table
Inside bucky rotational (Option)
Type : Floor mounted
Operation : 4 way floating (standard) / 6 way
elevation (optional) with electromagnetic locks.
Control :
Manual and motor control Synchronized table bucky position along the tube movement (longitudinal way)
Various size of cassettes or detectors are applicable with grid.
Travel distance :
Longitudinal : 100cm
Transverse : 34cm
Up/down (with elevation) : 51 ~ 84cm motorized
Table top size : 220 x 85cm
Max. loading : 250kg
kV setting : 40 ~ 150kV
Filtration rate of table top :
1.4mmAl@100kV
Wall Stand
Type : Floor mounted
Operation : Up/down & tilting
Control :
Manual and motor control Travel distance & angle :
Vertical : 40 ~ 160cm Various size of cassette and
detectors are applicable with grid
Outer dimensions
HF-525 Plus
3F, Urbanlight B/D, 630 Eonju-ro Gangnam-gu, Seoul, Korea 135-832 E [email protected]
T 070 7510 3400 | +82 70 7510 3400 F 070 8630 3420 | +82 70 8630 3420
www.ecoray.kr