0413 R
ev 0
0
HF Antennas
Catalog 2013
VERDANT TELEMETRY & ANTENNA SYSTEMS Pvt. Ltd.
COCHIN – 682013, INDIA.
Tel: +91-484-2663104 Fax: +91-484-2663576
e-mail: [email protected]
Website : www.verdanttelemetry.com
innovation in technology
AS 9100: 2009 (Rev C) & ISO 9001:2008, CEMILAC APPROVED FACILITY
DATA SHEET
VERDANT JM 705ADF Loop Antenna
JM 705 is an airborne loop antenna used with the Automatic Direction Finding System. The antenna is a fixed loop ferrite core encased in a low drag aerodynamic composite shell suitable for mounting on the top or bottom exteriors of the aircraft fuselage. It is used with Marconi ADF system AD 380 and HAL ADF System ARC 610A. This antenna is qualified and is suitable for Sea King, Alouette (Cheeta, Chetak), AN 32 and similar aircrafts.
ELECTRICAL MECHANICAL
Frequency Range 190 KHz - 1800 KHz Weight 2200 grams (Max)
Quadrantal error +17.5º Height 24 mm (Max)
Material Glass Epoxy
Finish Matt
Connector 10 Pin Circular
ENVIRONMENTAL
Temperature -55ºC to +90ºC SPEC
IFIC
ATIO
NS
Altitude 50,000 feet
*Contact us for your customized requirements Tests in accordance with MIL 810 D/E, JSS 55555, BS3G100
0413 R
ev 0
0
Dimensions are in mm
Inches shown in bracket
*All data contained herein is subject to change without notice VERDANT TELEMETRY & ANTENNA SYSTEMS Pvt. Ltd.
COCHIN – 682013, INDIA.
Tel: +91-484-2663104 Fax: +91-484-2663576
e-mail: [email protected]
Website : www.verdanttelemetry.com
innovation in technology
AS 9100: 2009 (Rev C) & ISO 9001:2008, CEMILAC APPROVED FACILITY
DATA SHEET
VERDANT JM 708ADF Loop Antenna
JM 708 is an airborne loop antenna used with the Automatic Direction Finding System. The antenna is a fixed loop ferrite core encased in a low drag aerodynamic composite shell suitable for mounting on the top or bottom exteriors of the aircraft fuselage. It is used with Marconi ADF system AD 380 and HAL ADF System ARC 610 A. This antenna is qualified and suitable for JAGUAR, MIG and similar aircrafts.
ELECTRICAL MECHANICAL
Frequency Range 190 KHz - 1800 KHz Weight 1200 grams (Max)
Quadrantal Error +10º Height 24 mm (Max)
Material Glass Epoxy
Finish Matt
Connector 10 Pin Circular
ENVIRONMENTAL
Temperature -55ºC to +85ºC SPEC
IFIC
ATIO
NS
Altitude 50,000 feet
*Contact us for your customized requirements Tests in accordance with MIL 810 F
0413 R
ev 0
0
Dimensions are in mm
Inches shown in bracket
*All data contained herein is subject to change without notice VERDANT TELEMETRY & ANTENNA SYSTEMS Pvt. Ltd.
COCHIN – 682013, INDIA.
Tel: +91-484-2663104 Fax: +91-484-2663576
e-mail: [email protected]
Website : www.verdanttelemetry.com
innovation in technology
AS 9100: 2009 (Rev C) & ISO 9001:2008, CEMILAC APPROVED FACILITY
DATA SHEET
VERDANT JH 60 Marker Beacon Antenna
JH 60 Marker Beacon antenna designed to be used with ILS system. The radiating element is encased in a single piece glass fibre reinforced epoxy radome. These antennas are low profile, low drag antennas designed to withstand severe environmental conditions ideally suited for high performance supersonic aircrafts.
ELECTRICAL MECHANICAL Frequency Range 75 ± 0.25 MHz Weight 650 grams (Max) VSWR 1.5:1 Max Height 66 mm (Max) Polarization Linear / Horizontal Material Glass Epoxy Radiation Pattern Partially downward Finish Matt Impedance RF 50 ohms Nominal Connector N Female Static Protection DC Grounded Power RF Receive Only ENVIRONMENTAL Temperature -55ºC to +90ºC S
PEC
IFIC
ATIO
NS
Altitude 60,000 feet *Contact us for your customized requirements Tests in accordance with MIL 810 F
0413
Rev
00
Dimensions are in mm Inches shown in bracket
*All data contained herein is subject to change without notice VERDANT TELEMETRY & ANTENNA SYSTEMS Pvt. Ltd.
COCHIN – 682013, INDIA.
Tel: +91-484-2663104 Fax: +91-484-2663576
e-mail: [email protected]
Website : www.verdanttelemetry.com innovation in technology
AS 9100: 2009 (Rev C) & ISO 9001:2008, CEMILAC APPROVED FACILITY
VERDANT TELEMETRY & ANTENNA SYSTEMS Pvt. Ltd.
COCHIN – 682013, INDIA.
Tel: +91-484-2663104 Fax: +91-484-2663576
e-mail: [email protected]
Website : www.verdanttelemetry.com
AS 9100: 2009 (Rev C) & ISO 9001:2008, CEMILAC APPROVED FACILITY