HFC 3175
- IEC 60092-359 type SHF-1
- IEC 60502 ST8
- BS7655 :6.1 types LTS1 & LTS3
- VDE 207 HM2 & HM4
- UTP & Telecom cable sheath
- IEC 60092-359 type SHF-1
- IEC 60502 ST8
- BS7655 :6.1 types LTS1 & LTS3
- VDE 207 HM2 & HM4
- UTP & Telecom cable sheath
APPLICATION
PROPERTY
HFFR Polyolefin Sheathing Compound for Shipboard & Telecom CablesThese compounds are engineered to enhance flame retardant property with ATH based on polyolefin for sheath of Shipboard, Telecom and power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. It is also designed to show well-balanced properties of flame retardant property, mechanical property and processing property etc.
www.unience.co.kr
Density @ 23oC g/cc ASTM D792
Melt Flow Index (170oC / 21.6kg) g/10min ASTM D1238
Tensile Strength MPaIEC 60811-1-1
Elongation at Break %
After ageing
Smoke Density
Corrosion test
(100oC/168hrs)
T.S Retention
Elongation Retention
Elongation Retention
%IEC 60811-1-2
%
Oil Resistance(IRM 902 / 70oC, 4hrs)
T.S Retention %IEC 60811-2-1
%
Hot Pressure test (80oC) % IEC 60811-3-1
Cold Impact test (-15oC) - IEC 60811-1-4
Flaming (3mm)Ds Max ASTM E662
flaming(0.5mm)
PH -IEC 60754-2
Conductivity ㎲/㎜
Halogen acid gas evolution % IEC 60754-1
Oxygen Index % ASTM D2863
Volume Resistivity Ω.㎝ ASTM D257
Hardness Shore D ASTM D2240
Item Unit Test method HFC 3175
1.51
15
12
200
90
85
90
85
20
Pass
90
60
5.0
2.5
Not detected
40
1X1015
50
Main Office China Office1301 MingzhuBuilding, 59ShuichengRoad(S), Shanghai, 201103, P.R.ChinaTEL +86-21-6278-3734 / FAX +86-21-6278-9532
Marketing Headquarter8F SO8, Garden5 TOOL, 292, Munjung-dong, Songpa-gu, Seoul, 135-884, KoreaTEL +82-2-2047-4722 / FAX +82-2-2047-4709E-mail [email protected]
1113-10, Namchon-ri, Oaksan-myeon, Cheongwon-gun, Chungcheongbuk-do, 367-882, KoreaTEL +82-43-216-7955 / FAX +82-43-216-7958
PROCESSING
- Special compounds can be developed to meet customers specification and requirements.
- 500 & 750kg Reinforced Carton Box with inner aluminum liner.
- 25kg Paper bag with inner Aluminum liner.
CUSTOMIZE
PACKING
- It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC, 3 stage or barrier r type screw having an L/D ratio of 20~24 : 1 and a compression ratio of 1 . 2~1.8 : 1
- Should be stored at room temperature between 10~30oC.
- Maximum storage period in dry and clean place is 6 months unopened and in original packaging.
- If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 65~70oC. in a dehumidifying dryer.
- To ensure health and safety, Material Safety Data Sheets (MSDS) is available on request
www.unience.co.kr
STORAGE & HANDLING
Anti-rodent Anti-termite UV Resistance Color
HFC 3175 01.pdfHFC 3175 02.pdf