Date post: | 14-Apr-2018 |
Category: |
Documents |
Upload: | pravin-deshmane |
View: | 221 times |
Download: | 0 times |
of 26
7/27/2019 hhj Advanced Safety System in Automobiles
1/26
7/27/2019 hhj Advanced Safety System in Automobiles
2/26
7/27/2019 hhj Advanced Safety System in Automobiles
3/26
ABS Function, Design & Working
ABS types
Recent Advancements Effectiveness & Limitations
Testing & Validation
Job of the Driver
Closing Remarks
7/27/2019 hhj Advanced Safety System in Automobiles
4/26
To maintain the stability & steer-ability of the
vehicle while the wheels are impending lock or
skid in varying road conditions during braking.
To maneuver in your intended direction during
panic-stop situation.
To stop the vehicle with minimum stopping
distance.
7/27/2019 hhj Advanced Safety System in Automobiles
5/26
Consisted of Mechanical components only-Drum, Flywheel.
Relative angular speed difference between Drum & Flywheel causes some
drop in main hydraulic line & thereby reducing brake pressure in the
adequate amount.
7/27/2019 hhj Advanced Safety System in Automobiles
6/26
7/27/2019 hhj Advanced Safety System in Automobiles
7/26
i
7/27/2019 hhj Advanced Safety System in Automobiles
8/26
Operation-Wheel speed sensor (A) senses the abnormal spinning of the
wheel .-Signal(input strength) is sent to the ECU (B).
-ECU processes it & communicates with HCU (C) to increase ordecrease the brake pressure Tin the brake line (D) to the affected
wheel.
7/27/2019 hhj Advanced Safety System in Automobiles
9/26
INPUT TOABS
PROCESSING
OUTPUT-OPTIMUMBRAKING PRESSURE
7/27/2019 hhj Advanced Safety System in Automobiles
10/26
ABS Function, Design & Working.
ABS types.
Recent Advancements. Effectiveness & Limitations.
Testing & Validation.
Job of the Driver.
Closing Remarks.
7/27/2019 hhj Advanced Safety System in Automobiles
11/26
Four-channel, four-sensor ABS-This is the best scheme. There is a speed sensor on all four
wheels and a separate valve for all four wheels. With this setup, the controller monitors each
wheel individually to make sure it is achieving maximum braking force.
Three-channel, three-sensor ABS-This scheme, commonly found on pickup trucks with
four-wheel ABS, has a speed sensor and a valve for each of the front wheels, with one valve
and one sensor for both rear wheels. The speed sensor for the rear wheels is located in the
rear axle.
One-channel, one-sensor ABS-This system is commonly found on pickup trucks with rear-
wheel ABS. It has one valve, which controls both rear wheels, and one speed sensor, located
in the rear axle.
7/27/2019 hhj Advanced Safety System in Automobiles
12/26
ABS Function, Design & Working.
ABS types.
Recent Advancements. Effectiveness & Limitations.
Testing & Validation.
Job of the Driver.
Closing Remarks.
7/27/2019 hhj Advanced Safety System in Automobiles
13/26
Function-The job of the EBD as a subsystem of the ABS
system is to control the effective adhesion utilization by the
rear wheels & it automatically varies the amount of force appliedto each of a vehicle's brakes, based on road conditions, speed,
loading/weight, etc.
The pressure of the rear wheels is approximated to the ideal
brake force distribution in a partial braking.
EBD can apply more or less braking pressure to each wheel in order
to maximize stopping power whilst maintaining vehicular control.
7/27/2019 hhj Advanced Safety System in Automobiles
14/26
http://localhost/var/www/apps/conversion/tmp/scratch_10/corollaEBD.wmv7/27/2019 hhj Advanced Safety System in Automobiles
15/26
7/27/2019 hhj Advanced Safety System in Automobiles
16/26
FUNCTION- To prevent loss oftraction of the driven road wheels, and therefore maintain the
control of the vehicle when excessive throttle is applied by the driver (rapid acceleration) and
the condition of the road surface (due to varying factors) is unable to cope with
the torque applied.
The intervention can consist of one or more of the following:
Retard or suppress the spark to one or more cylinders.
Reduce fuel supply to one or more cylinders.
Brake one or more wheels.
Close the throttle.
In turbo-charged vehicles, the boost control solenoid can be actuated to reduce boost and
therefore engine power.
http://localhost/var/www/apps/conversion/tmp/scratch_10/TCS.mp4http://localhost/var/www/apps/conversion/tmp/scratch_10/TCS.mp47/27/2019 hhj Advanced Safety System in Automobiles
17/26
ABS Function, Design & Working
ABS types
Recent Advancements Effectiveness & Limitations
Testing & Validation
Job of the Driver
Closing Remarks
7/27/2019 hhj Advanced Safety System in Automobiles
18/26
Reduces the risk of multiple vehicle crashes by 18 percent,
Reduces the risk of run-off-road crashes by 35 percent.
On high-traction surfaces such asbitumen, orconcrete, ABS reduces
stopping distances.
Better than Threshold braking.
Reduces chances of skid & hence maintains the stability &
steer-ability.
Reduces wear & tear of tires.
http://en.wikipedia.org/wiki/Bitumenhttp://en.wikipedia.org/wiki/Concretehttp://en.wikipedia.org/wiki/Concretehttp://en.wikipedia.org/wiki/Bitumen7/27/2019 hhj Advanced Safety System in Automobiles
19/26
ABS fails to function when all wheels get locked
during braking.
Drivers of vehicles equipped with ABS tend to be
careless or overconfident (psychological influence).
7/27/2019 hhj Advanced Safety System in Automobiles
20/26
ABS Function, Design & Working
ABS types
Recent Advancements Effectiveness & Limitations
Testing & Validation
Job of the Driver
Closing Remarks
7/27/2019 hhj Advanced Safety System in Automobiles
21/26
Stability & Steer-ability.
Full braking on a curve & swerving.
Stopping distance.
More control on varying road conditions.
7/27/2019 hhj Advanced Safety System in Automobiles
22/26
ABS Function, Design & Working
ABS types
Recent Advancements Effectiveness & Limitations
Testing & Validation
Job of the Driver
Closing Remarks
7/27/2019 hhj Advanced Safety System in Automobiles
23/26
In order for ABS to Function effectively, driver should
press the brake pedal as hard as possible.
Do not put off your feet from the pedal if you sense
pulsing(-it indicates that ABS is working).
Driver should normally steer the vehicle to its intended
direction.
Don't release the pedal until you have safely stopped.
http://localhost/var/www/apps/conversion/tmp/scratch_10/3S%20RULES.wmvhttp://localhost/var/www/apps/conversion/tmp/scratch_10/3S%20RULES.wmv7/27/2019 hhj Advanced Safety System in Automobiles
24/26
ABS Function, Design & Working ABS types
Recent Advancements Effectiveness & Limitations Testing & Validation Job of the Driver Closing Remarks
7/27/2019 hhj Advanced Safety System in Automobiles
25/26
Today ABS is a utmost necessary advanced safety feature
in almost any automobile.
EBD, ESC & TCS assist ABS depending on their specificcapabilities and functions.
Even an alert skilled driver would find it difficult without
ABS to match the performance of vehicle with ABS.
Even if your vehicle has ABS, Be attentive while driving.
7/27/2019 hhj Advanced Safety System in Automobiles
26/26