+ All Categories
Home > Documents > HIE-ISOLDE HEBT: characteristics

HIE-ISOLDE HEBT: characteristics

Date post: 15-Feb-2016
Category:

Documents
Upload: marlon
View: 35 times
Download: 0 times
Download Report this document
Share this document with a friend
Description:
HIE-ISOLDE HEBT: characteristics. Beamline diameter: 40 mm (REX: 100 mm) Beamline height: 1.75 m Beamline vacuum: low 1e-7- high 1e-8 mbar Connection of setups: Beamline ends with fast vacuum valve, DN40 - PowerPoint PPT Presentation
Popular Tags:
power setup
power electronics
laser pulse proton
cable trench
laser pulse sc
electricity needs
isolde vacuum interlock
wall trench
24
HIE-ISOLDE HEBT: characteristics Beamline diameter: 40 mm (REX: 100 mm) Beamline height: 1.75 m Beamline vacuum: low 1e-7- high 1e-8 mbar Connection of setups: Beamline ends with fast vacuum valve, DN40 On the setup’s side: permanent KF40 double cross with a Penning and Pirani connected to ISOLDE vacuum interlock Space for experiments – between cable trench and Jura wall Moving equipment: from new SAS, along the wall
Transcript
Page 1: HIE-ISOLDE HEBT: characteristics

HIE-ISOLDE HEBT: characteristicsBeamline diameter: 40 mm (REX: 100 mm)Beamline height: 1.75 mBeamline vacuum: low 1e-7- high 1e-8 mbar

Connection of setups:Beamline ends with fast vacuum valve, DN40On the setup’s side: permanent KF40 double cross with a Penning and Pirani connected to ISOLDE vacuum interlock

Space for experiments – between cable trench and Jura wall

Moving equipment: from new SAS, along the wall

http://www.avtservices.com.au/shop/A37132919-E2M1.5-Two-Stage-Rotary-Pump.html
http://www.avtservices.com.au/shop/A37132919-E2M1.5-Two-Stage-Rotary-Pump.html
http://www.google.ch/imgres?imgurl=http://www.avtservices.com.au/shop/images/T/kfcross_th-02.jpg&imgrefurl=http://www.avtservices.com.au/shop/A37132919-E2M1.5-Two-Stage-Rotary-Pump.html&h=108&w=120&tbnid=Ql4V72AdbYxbIM:&zoom=1&docid=EwsPwRBVFZsYBM&ei=QYA6U8KjF6m02wXprICQBw&tbm=isch&ved=0CGQQhBwwBg
Page 2: HIE-ISOLDE HEBT: characteristics

Trench 88cm

Beamine cable trays

Space for experiments – on this side of the trench

• Setup• Electronics + dewars• Cable path• Patch panel

Surveyors’ reference pole (position to be discussed)

Miniball cables length is 15m

5.1 m

2.6 m

1:100

MINIBALL

Page 3: HIE-ISOLDE HEBT: characteristics

Miniball - Requirements:

Electricity needs:• Power – setup, pumps:• Power – electronics:• 3 phase plugs:

63A 32A electronics, 10A PC, 16A setup one 3 phase plug

Signals from/to ISOLDE (e.g. proton or laser pulse)

SC, Proton on target, EBIS, laser pulse

Cable trays yes

Gases -

Cryogenics yes

Mechanical support structures -

Page 4: HIE-ISOLDE HEBT: characteristics

trench

Ca. 1.3 m

Trench below experiments will be reinforced to keep stability and withstand the weight

1.75 m Ca. 1.2 m

Page 5: HIE-ISOLDE HEBT: characteristics

235

cm

87 cm

270

cm

Page 6: HIE-ISOLDE HEBT: characteristics

90 cm

Page 7: HIE-ISOLDE HEBT: characteristics
Page 8: HIE-ISOLDE HEBT: characteristics

trench

Beamine cable trays

Space for experiments – on this side of the trench

Please mark:• Setup• Electronics• Cable path

Surveyors’ reference pole (position to be discussed)

Ion beam focus: in the middle of the trench

Page 9: HIE-ISOLDE HEBT: characteristics

trench

Beamine cable trays

Space for experiments – on this side of the trench

Please mark:• Setup• Electronics• Cable path

Surveyors’ reference pole (position to be discussed)

Ion beam focus: in the middle of the trench

ACTAR

Page 10: HIE-ISOLDE HEBT: characteristics

Requirements for ACTAR TPC:

Electricity needs:• Power – setup, pumps: • Power – electronics:• 3 phase plugs:

Standard vacuum system, vol ≈100 lt≈2 kW detector power supplies---

Signals from/to ISOLDE (e.g. proton or laser pulse)

Proton, gate, Laser, EBIS

Cable trays Detector to electronic racks: not necessary

Gases C4H10, D2, He, Ar, CO2…

Cryogenics No

Mechanical support structures To be decided

Page 11: HIE-ISOLDE HEBT: characteristics

Beam focal pointMiddle of the trench

Active target chamberGas

control/bottles

Gas control

Electronics

Electronics

Electronics

Beam pipe,auxiliary detectors,safety valves

Mk: Can it move to the right?

Page 12: HIE-ISOLDE HEBT: characteristics

trench

CF40 valve

If possible: leave space for a CF40 cross with vacuum gauges

Beam focus

Ca. 1.3 m

Trench below experiments will be reinforced to keep stability and withstand the weight

1.75 m Ca. 1.2 m

Active target chamber

Beam pipe,auxiliary detectors,safety valves

Page 13: HIE-ISOLDE HEBT: characteristics

Requirements:

Electricity needs:• Power – setup, pumps:• Power – electronics:• 3 phase plugs:

Signals from/to ISOLDE (e.g. proton or laser pulse) Cable trays

Gases

Cryogenics

Mechanical support structures

Page 14: HIE-ISOLDE HEBT: characteristics

Please mark your setup and electronics

Beam focal pointMiddle of the trench

Page 15: HIE-ISOLDE HEBT: characteristics

Please mark your setup and connections

Movable

trench

CF40 valve

If possible: leave space for a CF40 cross with vacuum gauges

Beam focus

Ca. 1.3 m

Trench below experiments will be reinforced to keep stability and withstand the weight

1.75 m Ca. 1.2 m

Demineralised 27-deg waterCompressed air, gas lines

power

Movable power box

Page 16: HIE-ISOLDE HEBT: characteristics

Requirements - CORSET:

Electricity needs: 2 racks for NIM crates

Signals from/to ISOLDE (e.g. proton or laser pulse)

Pulse arrival

Cable trays -

Gases -

Cryogenics -

Mechanical support structures

▪ Reaction chamber with diameter of 0.75 - 1 m

▪ 2 racks for NIM crates; can be installed remote

▪ No special devices for the mounting of CORSET are needed

Page 17: HIE-ISOLDE HEBT: characteristics

The CORSET Spectrometer

rotatable

Si stop detectorTOF(MCP detectors)

0.5 – 1 m Si detector

TOF detector

Page 18: HIE-ISOLDE HEBT: characteristics

The CORSET Spectrometer

CORSET reaction chamber at GSI

1 m

Page 19: HIE-ISOLDE HEBT: characteristics

Needs for the Installation of CORSET

▪ Reaction chamber with diameter of 0.75 - 1 m

▪ 2 racks for NIM crates; can be installed remote

▪ No special devices for the mounting of CORSET are needed

Page 20: HIE-ISOLDE HEBT: characteristics

Please mark your setup and electronics

Beam focal pointMiddle of the trench

rota

tabl

e

Si st

op d

etec

tor

TOF

(MCP

det

ecto

rs)

0.5 – 1 m

electronics

Page 21: HIE-ISOLDE HEBT: characteristics

Requirements – tilted foils:Tilted Foils b-NMR setup

Electricity needs:• Power – setup, pumps:• Power – electronics:• 3 phase plugs:

1 x 64 Amp (magnet supply + pumps)2 x 16 Amp not required

Signals from/to ISOLDE (e.g. proton or laser pulse)

signals from EBIS

Cable trays No special trays required

Gases No

Cryogenics Not considered for the moment

Mechanical support structures Adjustable height

Page 22: HIE-ISOLDE HEBT: characteristics

General overview

Page 23: HIE-ISOLDE HEBT: characteristics

General overview

Page 24: HIE-ISOLDE HEBT: characteristics

Magnet support –adjustable height


Recommended
HIE-ISOLDE Project Status Report Y. Kadi for the HIE-ISOLDE Project Team HIE-ISOLDE Physics Coordination WG Meeting CERN, 16 February 2015.

HIE-ISOLDE Project Status Report Y. Kadi for the HIE-ISOLDE Project Team HIE-ISOLDE Physics Coordination WG Meeting CERN, 16 February 2015.

Documents

HIE-ISOLDE beam transfer lines magnets

HIE-ISOLDE beam transfer lines magnets

Documents

HIE-Isolde Low Level RF proposal

HIE-Isolde Low Level RF proposal

Documents

ACTAR @ HIE-ISOLDE Experimental requirements

ACTAR @ HIE-ISOLDE Experimental requirements

Documents

HIE-ISOLDE SC-RF Cavities

HIE-ISOLDE SC-RF Cavities

Documents

HIE-ISOLDE - Universität zu Kölnwarr/doc/hie-isolde.pdf · 2016. 9. 20. · HIE-ISOLDE Nigel Warr June 2015 Contents 1 Introduction3 2 Naming ... The beam lines join to the common

HIE-ISOLDE - Universität zu Kölnwarr/doc/hie-isolde.pdf · 2016. 9. 20. · HIE-ISOLDE Nigel Warr June 2015 Contents 1 Introduction3 2 Naming ... The beam lines join to the common

Documents

Safety Issues for HIE-ISOLDE and nTOF-Ph2

Safety Issues for HIE-ISOLDE and nTOF-Ph2

Documents

HIE ISOLDE: opportunities, challenges and importance

HIE ISOLDE: opportunities, challenges and importance

Documents

HIE -ISOLDE Project Status Report

HIE -ISOLDE Project Status Report

Documents

HIE-LINAC and Beam lines for HIE-ISOLDE experiments...HIE-ISOLDE-PROJECT-Note-0003 HIE-LINAC and Beam lines for HIE-ISOLDE experiments M. Pasini Abstract The document gives a brief

HIE-LINAC and Beam lines for HIE-ISOLDE experiments...HIE-ISOLDE-PROJECT-Note-0003 HIE-LINAC and Beam lines for HIE-ISOLDE experiments M. Pasini Abstract The document gives a brief

Documents

Si detector for HIE-ISOLDE

Si detector for HIE-ISOLDE

Documents

Status of The HIE-ISOLDE Design Study

Status of The HIE-ISOLDE Design Study

Documents

Notes on the HIE-ISOLDE HEBT - CERNcds.cern.ch/record/1436078/files/HIE-ISOLDE-PROJECT-Note...The HEBT will need to transfer the beam from the HIE-ISOLDE linac to up to four experimental

Notes on the HIE-ISOLDE HEBT - CERNcds.cern.ch/record/1436078/files/HIE-ISOLDE-PROJECT-Note...The HEBT will need to transfer the beam from the HIE-ISOLDE linac to up to four experimental

Documents

HIE-ISOLDE Status & Summary of HIE-ISOLDE SC

HIE-ISOLDE Status & Summary of HIE-ISOLDE SC

Documents

HIE-ISOLDE HEBT beam optics studies with MADX...Beam design and beam optics studies for the HIE-ISOLDE transfer lines [1, 2] have been carried out in MADX [3], and benchmarked against

HIE-ISOLDE HEBT beam optics studies with MADX...Beam design and beam optics studies for the HIE-ISOLDE transfer lines [1, 2] have been carried out in MADX [3], and benchmarked against

Documents

Ideas for REX/HIE-ISOLDE Upgrade · 2019. 6. 4. · REX/HIE-ISOLDE before LS2 Phase 2B of HIE-ISOLDE completed and operational since 2018: Four cryomodules Three High Energy Transfer

Ideas for REX/HIE-ISOLDE Upgrade · 2019. 6. 4. · REX/HIE-ISOLDE before LS2 Phase 2B of HIE-ISOLDE completed and operational since 2018: Four cryomodules Three High Energy Transfer

Documents

RDDS measurements at RITU and prospects at HIE-ISOLDE

RDDS measurements at RITU and prospects at HIE-ISOLDE

Documents

UNIVERSITY OF JYVÄSKYLÄ RDDS measurements at RITU and prospects at HIE-ISOLDE T. Grahn University of Jyväskylä HIE-ISOLDE Spectrometer Workshop, Lund 10.-11.3.2011.

UNIVERSITY OF JYVÄSKYLÄ RDDS measurements at RITU and prospects at HIE-ISOLDE T. Grahn University of Jyväskylä HIE-ISOLDE Spectrometer Workshop, Lund 10.-11.3.2011.

Documents