INPUT VOLTAGE:100-277/347VAC 50/60HZ
CorridorRecreation Room
Restaurant
The appearance of the fashion design, excel lent manufactur ing qual i ty, can be used in most large place.
High Bay Fixture
EPISTAR SMD2835 OR OSRAM SMD3030
Internal Meanwell driver
www.lonyung.comOEN+ODM +
THD<20% / PF>0.95 / CRI>80 / UGR<19 / >120°Beam Angle
120°
TELLANDLINE 86-0760-22182786
LONYUNG LED LIGHTING CO.,LTD WWW.LONYUNG.COM
HIGH BAY FIXTUREBig Lights Source DesignExtremely Bright and PowerfulWider Beam Angle
Excellent Heat DisbursementProtection To Chips And Driver
Pure Aluminum Housing
Specification.1MODEL
LY-HB180L900-150W/180W 3ft 150W/180W
LY-HB180L1200-200W/240W 4ft 200W/240W
SMD2835OR
SMD3030
LY-HB180L1500-250W/300W 5t 250W/300W
SIZE POWER LED CHIPLED Qty(pcs)CCT(K)
955x220x190(mm ) 1pc/ctn
LY-HB180L600-100W/120W 2ft 100W/120W 655x220x190(mm ) 1pc/ctn
1255x220x190(mm ) 1pc/ctn
1555x220x190(mm ) 1pc/ctn
450
300
600
750
PACKAGE
Warm WhiteNeutral WhiteCool White(2,700-6,500K)
LuminousEfficiency
140lm/w+10%
Light distribution curve
Light intensity unit：cd
C0/180C30/210C60/240C90/270
Acerage Beam Angle(50%):103.0°
0
30
60
90
120
150-150
-120
-90
-60
-30
0
794
1588
2383
3177
3971
USCLI ST E DPREMIUM
TELLANDLINE 86-0760-22182786
LONYUNG LED LIGHTING CO.,LTD WWW.LONYUNG.COM
Product line drawingSize:(mm)
Standard Accessories
POWER CORD SUSPENDING KITS
SURFACE MOUNTED CLIPS
SCREWS
172
93
Pc Cover WW2700-3200K NW4000-4500K CW6000-6500KLuminous Flux(Lm) ±10%
Specification. 2
Model Pc Cover WW2700-3200K NW4000-4500K CW6000-6500KLuminous Flux(Lm) ±10%
Frosted 23400 23600 23800LY-HB180L900-150W/180W Lens
Frosted 15600 15750 15900LY-HB180L600-100W/120W Lens
Frosted 31200 31500 31800 LensLY-HB180L1200-200W/240W
Frosted 39000 39300 39600
23400 23600 23800
15600 15750 15900
31200 31500 31800
39000 39300 39600LensLY-HB180L1500-250W/300W
600/900/1200/1500 600/900/1200/1500
HIGH BAY FIXTURE
177
97
17293
177
97
TELLANDLINE 86-0760-22182786
LONYUNG LED LIGHTING CO.,LTD WWW.LONYUNG.COM
STEP1. STEP2.
STEP3.
(Brown: L,Blue: N,Yellow: Earth for Europe)(White: N,Black: L,Yellow/Green:Earth For North America)
AC100-277V
To avoid electric shock,maintenance and installation should only be carried out by a professional electricianBefore installation, turn off the power to make sure safetyFollow the diagram for below for proper installation
Steps of installation
120°
STEP1. STEP2.
STEP3.
(Brown: L,Blue: N,Yellow: Earth for Europe)(White: N,Black: L,Yellow/Green:Earth For North America)
AC100-277V
WARNINGDisconnect power before installation,must be installed by licensed electrician. Please use it under correct input power range.Do not use or do not using. if the product does not operate properly,check connections after the power is turned off, in case of failure replace the fixtures.
!
HIGH BAY FIXTURE
SURFACE MOUNTED
SURFACE MOUNTED
SUSPENDING
SUSPENDING
SUSPENDING
SURFACE MOUNTEDInstall ceiling buckle & tighten with the fastening screw.
Install ceiling buckle & tighten with the fastening screw.
Hooked the fixture with the iron chain.
Hooked the iron chain into the ceiling buckle.
Fixted rotatable clips & fixture with tighten screws.
Fixed the clips between ceiling and light with screws
TELLANDLINE 86-0760-22182786
LONYUNG LED LIGHTING CO.,LTD WWW.LONYUNG.COM
STEP1. STEP2.
STEP3.
(Brown: L,Blue: N,Yellow: Earth for Europe)(White: N,Black: L,Yellow/Green:Earth For North America)
AC100-277V
To avoid electric shock,maintenance and installation should only be carried out by a professional electricianBefore installation, turn off the power to make sure safetyFollow the diagram for below for proper installation
Steps of installation
120°
STEP1. STEP2.
STEP3.
(Brown: L,Blue: N,Yellow: Earth for Europe)(White: N,Black: L,Yellow/Green:Earth For North America)
AC100-277V
WARNINGDisconnect power before installation,must be installed by licensed electrician. Please use it under correct input power range.Do not use or do not using. if the product does not operate properly,check connections after the power is turned off, in case of failure replace the fixtures.
!
HIGH BAY FIXTURE
SURFACE MOUNTED
SURFACE MOUNTED
SUSPENDING
SUSPENDING
SUSPENDING
SURFACE MOUNTEDInstall ceiling buckle & tighten with the fastening screw.
Install ceiling buckle & tighten with the fastening screw.
Hooked the fixture with the iron chain.
Hooked the iron chain into the ceiling buckle.
Fixted rotatable clips & fixture with tighten screws.
Fixed the clips between ceiling and light with screws
