Date post: | 28-Mar-2018 |
Category: |
Documents |
Upload: | hoanghuong |
View: | 215 times |
Download: | 2 times |
High Performance
Solder Products
Leaders in lead free
technology
SN100C • North America
Licensee of Nihon
Superior’s SN100C
Bar Solder • SN100C
• 63/37
No Clean an Water
Soluble: • Solder Pastes
• Fluxes
• Wire Solder
Advanced Stencil &
Laser Technology
Technology • Leaders in Stencil
Technology
• Leaders in Laser
Technology
Advanced Material
Technology • SLIC
• Ultra SLIC™ FG
Delivery • Memphis,
Tennessee: “FedEx
Plant” – Ship until
midnight
• San Jose, California:
“West Coast Plant”
• Colorado and
Canada plants
High Precision
Laser Cut Parts
Technology • Diode pumped
frequency tripled
NdYag lasers
• +/- .0005”
tolerances
• Ultra thin metals
and plastics
Experience • 50+ years
experience
Support • Engineering
Support
• Same day quotes
and quick turns
Solder Dross &
Metal Recovery
A Fresh Perspective • One source
electronic recycling
A Unique Approach • Our transparent
process means you
always know what
your dross is worth
Customer Service • Customer service is
our number one
priority.
• No customer is too
small and payment
will be issued in 30
days
FCT Solder has positioned itself as a leader in lead-free
solder products – We are the original licensee of Nihon Superior’s technology, and know
SN100C and its applications better than anyone in the industry.
Combining our latest flux technology with SN100c gives us
an advantage over all other solder suppliers in: – Paste
– Wire
– Flux
NC670 – Halogen-free, leaded solder paste that has excellent wetting
characteristics, excellent fine print characteristics with a pin probable crystal clear residue
RMA 250 – Leaded solder paste that is more active than the NC670 offering fine print
characteristics. Pin probable clear residue that can be cleaned
NL930PT – Halogen-free, lead-free solder paste (SAC or SN100C) that leaves a crystal
clear residue, is pin probable and has excellent fine print characteristics
NL932 – Halogen-free, lead-free solder paste (SAC or SN100C) that leaves a minimal
clear residue that can be cleaned. NL932 has excellent fine print characteristics with good wetting on all surface finishes
• WS159 • Leaded solder paste that is water washable with minimal
hydroscopic characteristics leading to a long stencil life in harsh
environments( 25-65% RH).
• Long Term Stability
• Lowest voiding paste on the market to date
• Excellent wetting on all surface finishes
• WS888 • Lead free solder paste (SAC or SN100C) that has very similar
characteristics to our WS159 Flux medium.
Sn100c Bar Solder:
Leading lead free solder for wave and selective solder applications.
– Low Drossing
– Low Copper Erosion
– Shiny finish
– Easiest maintenance of all lead free alloys
– Joint reliability at least equal to that of Sn63/Pb37
– Over 1.5 billion products assembled using SN100C
with no known defects
SN100c Wire Solder:
– Sn100c Alloy in No Clean and Water Soluble core wire
Flux:
– Fluxes that are designed to be used with both SN100c and SAC305 alloys.
Check out SN100C World @ www.fctsolder.com or
www.nihonsuperior.co.jp/english/sn100c/
Who Are We? • Fine Line Stencil is a technology leading manufacture, committed to
delivering the highest quality laser stencils in the industry.
• We use the most advanced laser and material technologies available in the world to meet current and future industry demands as components get smaller and smaller; µBGA, CSP, QFN, and 01005 components.
• The combination of the laser and material technology advancements coupled with our over 15 years technical expertise has resulted in our new SLIC and UltraSLIC stencils.
We serve our customers as a trusted ally, providing the loyalty of a business partner, an extension of engineering departments through our
“Root Cause Analysis Service” and the economics of an outside vendor. We ensure that our customers have the highest quality
products delivered on-time and pride ourselves as your value add supplier.
• R&D Group with degrees in Physics, Electrical
Engineering and Chemistry that study all aspects of
stencil technology and printing parameters
• Investment in the latest, most highly developed
Laser Technology on the market.
• Utilization of the finest grain foil technology the
market offers today.
• Most Advanced Testing/QC equipment on the
market today with the LPKF’s Scan Check System
SLIC Stencil:
• Excellent print performance down to a surface area ratio of 0.55
Ultra-SLIC Stencil:
• Excellent print performance down to a surface area ratio of 0.45
Performance
• Consistent solder paste deposition / Volume
• Reduction in stencil cleaning frequency
• Minimized Rework
Root Cause Analysis Service: • Investigate yield problems anywhere in your assembly process
• Identify the root cause
• Provide a solution based on accurate analysis
• Increase yields
Same Day Service with 3 manufacture locations • Memphis, TN.
• San Jose, CA.
• Montreal, Canada
ITAR Registered and ISO 9001:2008 Certified
Quality System - Measures every replacement and missed shipment
• One Goal - 99% or better quality shipments, delivered on time.
• A-Laser is the precision parts
manufacturing division of FCT Assembly.
Combining state of the art technology, years of
engineering experience and a culture of curiosity
we’ve built a reputation for quick turn delivery of
high quality components.
• Frequency Tripled ND-Yag laser cutting systems operating at
355nm wavelength
• Materials are ablated rather than melted, yielding virtually
carbon free cuts
• Able to process materials from 0.060” down to .9 microns
• Programs designed to handle multiple thicknesses in a single
step
• Experienced in fixturing for ultra thin material handling
• Beam diameter less than 20 microns enabling micro-drilling,
intricate design and fine features.
• Precise table movement and stability to maintain +/- 12
micron tolerances
• Optical fiducial recognition systems and LPKF Scan Check
for processing flex panels
• 3 shifts running to allow for same day turns on local flex jobs.
• Nd Yag Diode pumped and fiber laser cutting systems
operating at 1065 nm wavelength
• Used for working with metals between 1 and 25 mil thick
materials
• Process ideal for thin metal parts manufacturing due to ease
of design change, especially for multiple revisions seen in
prototyping stages
• Less than 25 micron beam diameter yields clean edged and
intricate designs
• The stability of the table and motion systems allows us to
reach precision levels +/- 12 microns
We offer recovery services for lead free and tin/lead
solder dross and scrap including: • solder paste
• solder wire
• populated circuit boards
• bare boards
FCT Recovery is committed to providing a high quality,
reliable and transparent service to its customers