8
High Performance and Value High Precision Servo < #+ ! SERVO
¡Headquarters Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp
• All specifications are subject to change without notice.• No part of this catalog may be reproduced in any form.• The products in this catalog are controlled based on Japan's “Foreign Exchange and Foreign Trade Law". The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.
Worldwide Customer Service and SupportFANUC operates customer service and support network worldwide through subsidiaries and affiliates. FANUC provides the highest quality service with the prompt response at any location nearest you.
Maintenance and Customer Support
FANUC Training CenterFANUC Training Center operates versatile training courses to develop skilled engineers effectively in several days.Inquiries : Yamanakako-mura, Yamanashi, Japan 401-0501Phone : 81-555-84-6030Fax : 81-555-84-5540
High Performance and Value High Precision Servo
<#+ ! SERVO
Headquarters
London
ParisBarcelonaMilanBudapestSofia Bangalore
Beijing
ChicagoDalian
ChangwonTaipeiTaichung
Johannesburg
Detroit
Sao Paulo
StuttgartLuxembourg
IstanbulMoscow
Prague
ManilaBangkokHo Chi MinhKuala LumpurSingaporeJakarta
Sydney
Shanghai
Shen Zhen
World Wide Support Over 230 Offices
Servo βi(E)-13, 2014.10, Printed in Japan© < CORPORATION, 2001
¡America and South AmericaFANUC America Corporation Tel 1-847-898-5000 Fax 1-847-898-5001FANUC South America Equipment of Automation Service Ltd（Brazil） Tel 55-11-3952-8888 Fax 55-11-3856-0848¡Europe, the middle east and Africa FANUC Europe Corporation,S.A. Tel 352-727777-1 Fax 352-727777-202FANUC Deutschland GmbH Tel 49-7158-187400 Fax 49-7158-187455FANUC FA France SAS Tel 33-1-6989-7000 Fax 33-1-6989-7001FANUC FA UK LIMITED Tel 44-1895-634182 Fax 44-1895-676140FANUC FA Italia S.r.l. Tel 39-02-45795-1 Fax 39-02-45795-250FANUC FA Iberia S.A.U Tel 34-943-74-82-90 Fax 34-943-74-44-21FANUC FA Satıs ve Servis Tic. Ltd. Sti.（Turkey） Tel 90-216-651-1408 Fax 90-216-6511405FANUC FA Bulgaria Ltd. Tel 359-2-963-3319 Fax 359-2-963-2873FANUC CZech s.r.o. Tel 420-234-072-111 Fax 420-234-072-110FANUC FA Hungary Kft Tel 36-23-332-007 Fax 36-23-332-008FANUC SOUTH AFRICA (PTY) LIMITED Tel 27-11-392-3610 Fax 27-11-392-3615“FANUC AUTOMATION”LLC（Russia） Tel 7-495-956-9780 Fax 7-495-956-9785
FANUC FA Polska Sp. zo.o. Tel 48-71-7766-170 Fax 48-71-7766-179FANUC FA Nordic AB Tel 46-8-505-80-700 Fax 46-8-505-80-701FANUC FA Switzerland GmbH Tel 41-32-366-63-63 Fax 41-32-366-63-64¡Asia and Oceania KOREA FANUC CORPORATION Tel 82-55-278-1200 Fax 82-55-284-9826TAIWAN FANUC CORPORATION Tel 886-4-2359-0522 Fax 886-4-2359-0771BEIJING-FANUC Mechatronics CO., LTD. Tel 86-10-6298-4726 Fax 86-10-6298-4741FANUC INDIA PRIVATE LIMITED Tel 91-80-2852-0041 Fax 91-80-2852-8491FANUC THAI LIMITED Tel 66-2-714-6111 Fax 66-2-714-6120FANUC MECHATRONICS (MALAYSIA) SDN. BHD. Tel 60-3-7628-0110 Fax 60-3-7628-0220PT. FANUC INDONESIA Tel 62-21-4584-7285 Fax 62-21-4584-7288FANUC SINGAPORE PTE. LTD. Tel 65-6-220-3911 Fax 65-6-225-0098FANUC OCEANIA PTY. LIMITED Tel 61-2-8822-4600 Fax 61-2-8822-4666FANUC PHILIPPINES CORPORATION Tel 63-2-813-3155 Fax 63-2-813-3157FANUC VIETNAM COMPANY LIMITED Tel 84-8-3824-6638 Fax 84-8-3824-6637
High Reliability, High Performance and Value #+ series SERVO
β+ series SERVO with high performance and value has enough performance and functions for feed axis and spindle axis of machine tools.
System configuration
High performance and value AC SERVO MOTOR with performance enough for feed axis of machine tools
¡Smooth rotation and compact sizeOptimized magnetic pole structure and mechanical design makes smooth rotation of feed axis and compact size with shorter axial length.
¡Quick accelerationHigh torque and quick acceleration for this small-size light-weight by original rotor shape.
¡Excellent waterproofingFANUC's unique seal structure provide excellent waterproofing, which endures harsh environment.
¡High resolution βi series Pulsecoder1,000,000/rev. Pulsecoder makes possible high accuracy positioning necessary for feed axis.
¡Bayonet type power connector Bayonet type power connector enables easy connecting and disconnecting of power connector.
¡Reduced Backlash Brake Reduced Backlash Brake can be selected optionally.
< AC SERVO MOTOR #+S-B/#+F-B !
High performance and value AC SPINDLE MOTOR with performance enough for spindle axis of machine tools
¡Compact size and high basic performanceOptimized winding design and effective cooling structure makes high power and high torque are achieved and compact size.
¡High efficiency and low heat generation by SPINDLE HRV ControlHigh efficiency and low heat generation are achieved with SPINDLE HRV Control, the same feature as αiI series.
¡Higher cutting performance by center-through-coolantβiIT series motors with hollow shaft are available, which enables center-through-coolant by direct connection with spindle of machining center.
< AC SPINDLE MOTOR #+I !
＊“S” of #+S-B means “Strong motor with neodymium magnets”. ＊“F” of #+F-B means “Motor with Ferrite magnets”.＊“I” of #+I means “Induction”.＊“SV” of #+SVSP-B means “SerVo” and “SP” means “SPindle”.＊“SV” of #+SV-B means “SerVo”.
< Series 0+-F
< SERVO AMPLIFIER@+SV-B !
< SERVO AMPLIFIER#+SVSP-B !
FANUC Serial Servo Bus(FSSB)
Optical fiber cable
< AC SERVO MOTOR #+S-B/#+F-B !< AC SPINDLE MOTOR #+I !< SERVO AMPLIFIER #+SVSP-B !, #+SV-B !
< AC SPINDLE MOTOR#+I/#+IC !@+I !
< AC SERVO MOTOR#+S-B/#+Sc-B/#+F-B !@+S-B/@+F-B !
< AC SERVO MOTOR#+S-B/#+Sc-B/#+F-B !@+S-B/@+F-B !
2 3
High Reliability, High Performance and Value #+ series SERVO
β+ series SERVO with high performance and value has enough performance and functions for feed axis and spindle axis of machine tools.
System configuration
High performance and value AC SERVO MOTOR with performance enough for feed axis of machine tools
¡Smooth rotation and compact sizeOptimized magnetic pole structure and mechanical design makes smooth rotation of feed axis and compact size with shorter axial length.
¡Quick accelerationHigh torque and quick acceleration for this small-size light-weight by original rotor shape.
¡Excellent waterproofingFANUC's unique seal structure provide excellent waterproofing, which endures harsh environment.
¡High resolution βi series Pulsecoder1,000,000/rev. Pulsecoder makes possible high accuracy positioning necessary for feed axis.
¡Bayonet type power connector Bayonet type power connector enables easy connecting and disconnecting of power connector.
¡Reduced Backlash Brake Reduced Backlash Brake can be selected optionally.
< AC SERVO MOTOR #+S-B/#+F-B !
High performance and value AC SPINDLE MOTOR with performance enough for spindle axis of machine tools
¡Compact size and high basic performanceOptimized winding design and effective cooling structure makes high power and high torque are achieved and compact size.
¡High efficiency and low heat generation by SPINDLE HRV ControlHigh efficiency and low heat generation are achieved with SPINDLE HRV Control, the same feature as αiI series.
¡Higher cutting performance by center-through-coolantβiIT series motors with hollow shaft are available, which enables center-through-coolant by direct connection with spindle of machining center.
< AC SPINDLE MOTOR #+I !
＊“S” of #+S-B means “Strong motor with neodymium magnets”. ＊“F” of #+F-B means “Motor with Ferrite magnets”.＊“I” of #+I means “Induction”.＊“SV” of #+SVSP-B means “SerVo” and “SP” means “SPindle”.＊“SV” of #+SV-B means “SerVo”.
< Series 0+-F
< SERVO AMPLIFIER@+SV-B !
< SERVO AMPLIFIER#+SVSP-B !
FANUC Serial Servo Bus(FSSB)
Optical fiber cable
< AC SERVO MOTOR #+S-B/#+F-B !< AC SPINDLE MOTOR #+I !< SERVO AMPLIFIER #+SVSP-B !, #+SV-B !
< AC SPINDLE MOTOR#+I/#+IC !@+I !
< AC SERVO MOTOR#+S-B/#+Sc-B/#+F-B !@+S-B/@+F-B !
< AC SERVO MOTOR#+S-B/#+Sc-B/#+F-B !@+S-B/@+F-B !
2 3
+
X
SP SP
Z X
SP
Z
β+S-B Servo Motor(X, Z)
β+S-B Servo Motor(X, Z)
β+SVSP-B Amplifier1 Spindle + 2 Servo
β+SVSP-B Amplifier1 Spindle + 2 Servo
β+SVSP-B Amplifier: 1 spindle＋3 Servo
α+SV-B Amplifier : 1 ATC
β+I Spindle Motoror
α+I Spindle Motor(Spindle axis)
β+I Spindle Motoror
α+I Spindle Motor(Spindle axis, Live tool axis)
α+SP-B Amplifier1 Live tool axis
#+SV20-B #+SV20/20-B
β+S-B Servo Motor
β+I or α+I Spindle Motorβ+S-B/β+F-B or α+S-B/α+F-B Servo Motor
High reliability, high performance and value SERVO AMPLIFIER
¡High performance and valueAll in one SERVO AMPLIFIER （servo 3 axes + spindle 1 axis） combined with Series 0i-MODEL F is developed in same concept with αi-B SERVO AMPLIFIER. High performance and value servo system is possible by enhancing Machining Performance, Minimizing Downtime, and Usability.
¡Machining PerformanceHigh-speed Rigid Tapping effective for reducing cycle time is applied by optical interface of not only servo axis but also spindle axis.
¡Minimizing downtimeBuilt-in cooling fan exchangeable from servo amplifier front side. Trouble diagnosis function can find quickly cause of alarm.
¡UsabilityIncreasing of additional axis to βiSVSP-B by applying Spindle Smart Acc./Dec. Separated Magnetic contactor reduced by applying STO （Safe Torque Off ） function
< SERVO AMPLIFIER #+SVSP-B !
Feature
System configuration
¡Best suited servo configuration with various motors and amplifiers
¡Achieved of economical lathes with live tool utilizing of All in one Amplifier β+SVSP-B for basic axes and additional α+SP-B for live tool axis
¡Higher competitiveness of economical machine by combination with All in one Amplifier β+SVSP-B and α+I Spindle Motor
¡Economical lathes with live tool
SERVO AMPLIFIER with high performance and value suited to basic axis of economical machine
¡Integrated with power supplyβiSV-B is integrated with power supply. 1 axis type and 2 axes type are prepared.
βiSV-B has enough performance for servo axis with 0i Mate-MODEL D combination in economical lathes used inverter.
¡Smart maintenanceSmart maintenance can be performed by Amplifier ID information, and connector of power cable for servo motor.
¡Free combination within capacity of power supply in βiSVSP-B Amplifier
< SERVO AMPLIFIER #+SV-B !
¡Economical machining center
β+I/α+I Spindle Motor driven by β+SVSP-B Amplifier
¡βiSVSP-B can drive servo motor, whose current value is equal and one rank smaller to amplifier.¡In case of combination with following motors, dynamic brake stop distance may increase. So, please confirm with descriptions manual in details.
[Servo Motor Specification]αiS 8/4000-B, αiS 8/6000-B, αiS 12/4000-B, αiF 4/5000-B, αiF 8/3000-B, αiF 8/4000-B, αiF 12/4000-B, αiF 22/3000-BβiS 12/3000-B, βiS 22/2000-B, βiS 22/3000-B, βiS 30/2000-B, βiS 40/2000-B, βiSc 12/3000-B, βiSc 22/2000-B, βiF 22/2000-B, βiF 30/1500-B
α+S-B/α+F-B、β+S-B/β+F-B Servo Motor driven by β+SVSP-B Amplifier
4 5
+
X
SP SP
Z X
SP
Z
β+S-B Servo Motor(X, Z)
β+S-B Servo Motor(X, Z)
β+SVSP-B Amplifier1 Spindle + 2 Servo
β+SVSP-B Amplifier1 Spindle + 2 Servo
β+SVSP-B Amplifier: 1 spindle＋3 Servo
α+SV-B Amplifier : 1 ATC
β+I Spindle Motoror
α+I Spindle Motor(Spindle axis)
β+I Spindle Motoror
α+I Spindle Motor(Spindle axis, Live tool axis)
α+SP-B Amplifier1 Live tool axis
#+SV20-B #+SV20/20-B
β+S-B Servo Motor
β+I or α+I Spindle Motorβ+S-B/β+F-B or α+S-B/α+F-B Servo Motor
High reliability, high performance and value SERVO AMPLIFIER
¡High performance and valueAll in one SERVO AMPLIFIER （servo 3 axes + spindle 1 axis） combined with Series 0i-MODEL F is developed in same concept with αi-B SERVO AMPLIFIER. High performance and value servo system is possible by enhancing Machining Performance, Minimizing Downtime, and Usability.
¡Machining PerformanceHigh-speed Rigid Tapping effective for reducing cycle time is applied by optical interface of not only servo axis but also spindle axis.
¡Minimizing downtimeBuilt-in cooling fan exchangeable from servo amplifier front side. Trouble diagnosis function can find quickly cause of alarm.
¡UsabilityIncreasing of additional axis to βiSVSP-B by applying Spindle Smart Acc./Dec. Separated Magnetic contactor reduced by applying STO （Safe Torque Off ） function
< SERVO AMPLIFIER #+SVSP-B !
Feature
System configuration
¡Best suited servo configuration with various motors and amplifiers
¡Achieved of economical lathes with live tool utilizing of All in one Amplifier β+SVSP-B for basic axes and additional α+SP-B for live tool axis
¡Higher competitiveness of economical machine by combination with All in one Amplifier β+SVSP-B and α+I Spindle Motor
¡Economical lathes with live tool
SERVO AMPLIFIER with high performance and value suited to basic axis of economical machine
¡Integrated with power supplyβiSV-B is integrated with power supply. 1 axis type and 2 axes type are prepared.
βiSV-B has enough performance for servo axis with 0i Mate-MODEL D combination in economical lathes used inverter.
¡Smart maintenanceSmart maintenance can be performed by Amplifier ID information, and connector of power cable for servo motor.
¡Free combination within capacity of power supply in βiSVSP-B Amplifier
< SERVO AMPLIFIER #+SV-B !
¡Economical machining center
β+I/α+I Spindle Motor driven by β+SVSP-B Amplifier
¡βiSVSP-B can drive servo motor, whose current value is equal and one rank smaller to amplifier.¡In case of combination with following motors, dynamic brake stop distance may increase. So, please confirm with descriptions manual in details.
[Servo Motor Specification]αiS 8/4000-B, αiS 8/6000-B, αiS 12/4000-B, αiF 4/5000-B, αiF 8/3000-B, αiF 8/4000-B, αiF 12/4000-B, αiF 22/3000-BβiS 12/3000-B, βiS 22/2000-B, βiS 22/3000-B, βiS 30/2000-B, βiS 40/2000-B, βiSc 12/3000-B, βiSc 22/2000-B, βiF 22/2000-B, βiF 30/1500-B
α+S-B/α+F-B、β+S-B/β+F-B Servo Motor driven by β+SVSP-B Amplifier
4 5
Servo Control for High Precision
SERVO HRV3, HRV3+ control is prepared as standard with Series 0+/0+ Mate.By combination of hardware technology such as “Servo motor with ultra smooth rotation”, “High accurate current detection”, “High response and high resolution Pulsecoder”, and ‘SERVO HRV3 Control’, high speed and high precision control can be realized. And machining s h a p e c a n b e e n h a n c e d b y Sma r t B a c k l a s h Compensation depending on transfer characteristic of machine.
SERVO HRV Control
The spindle control part in β+SVSP-B is connected to CNC by FSSB （Optical interface）. High performance rigid tap in the synchronization point of view is achieved by direct transferring of spindle position data to servo axis with high speed FSSB communication. It realizes high speed and high accuracy r igid tap with maximum acceleration power of spindle motor. It will help your request to shorten cycle time.
SPINDLE HRV Control
“One-shot setting” for high speed and high precision control and “One-shot tuning” for best velocity loop gain can be set on Parameter Setting Support Screen of Series 0+/0+ Mate.
SERVO GUIDEThis software provides the integrated environment for making test programs, setting parameters, and data measurement needed for servo and spindle tuning. It is useful not only for servo tuning but also for the measurement of spindle characteristic.It has substantial automatic tuning functions for gains filters, and others. Connect ion f rom PC to CNC is easy and di rect , through PCMCIA-LAN card, attached on the CNC front panel.With SERVO GUIDE , quick and smart optimization of servo and spindle can be achieved.
High speed and high precision servo control
FSSB High-speed Rigid Tapping
Parameter Setting Support Screen
Servo Tuning Tools
Minimizing downtime
Fan motor is exchangeable from front side without removing amplifier from cabinet. Time for exchanging fan motor is reduced.
Easy exchange of fan motor
Fan motor may damage caused by Adhesion of cutting fluid or cutting chips. By monitoring rotation of fan motor fallen, abnormal level of fan motor can detect preventively and fan motor can exchange easily.
Fan motor rotation detection function
Trouble diagnosis function is prepared in combination with 0+-F or 30+-B series CNC.The diagnosis information which is useful for trouble shooting at the time of alarm occurrence can be seen on CNC screen¡Trouble diagnosis guidance screen¡Trouble diagnosis monitor screen¡Trouble diagnosis graphic screen
Time for exchanging fan motor reduced
Contribution to preventive diagnosis
Quick finding cases of alarms
Trouble diagnosis function
FSSB high-speed rigid tapping（Example）
1353ms
54p
50p
Synchronouserror
- Keeping high accuracy- Time const. for acc./dec.18.2% shorter
Applying maximum accelerationpower of spindle motor
1293ms
FunctionOFF
Spindle motorspeed
Servo motorspeed
Spindle torquecommand
FunctionON
SERVO HRV3 Control （Example）
5µm/div
Radius : 50mmFeed : 4000mm/min
6 7
Servo Control for High Precision
SERVO HRV3, HRV3+ control is prepared as standard with Series 0+/0+ Mate.By combination of hardware technology such as “Servo motor with ultra smooth rotation”, “High accurate current detection”, “High response and high resolution Pulsecoder”, and ‘SERVO HRV3 Control’, high speed and high precision control can be realized. And machining s h a p e c a n b e e n h a n c e d b y Sma r t B a c k l a s h Compensation depending on transfer characteristic of machine.
SERVO HRV Control
The spindle control part in β+SVSP-B is connected to CNC by FSSB （Optical interface）. High performance rigid tap in the synchronization point of view is achieved by direct transferring of spindle position data to servo axis with high speed FSSB communication. It realizes high speed and high accuracy r igid tap with maximum acceleration power of spindle motor. It will help your request to shorten cycle time.
SPINDLE HRV Control
“One-shot setting” for high speed and high precision control and “One-shot tuning” for best velocity loop gain can be set on Parameter Setting Support Screen of Series 0+/0+ Mate.
SERVO GUIDEThis software provides the integrated environment for making test programs, setting parameters, and data measurement needed for servo and spindle tuning. It is useful not only for servo tuning but also for the measurement of spindle characteristic.It has substantial automatic tuning functions for gains filters, and others. Connect ion f rom PC to CNC is easy and di rect , through PCMCIA-LAN card, attached on the CNC front panel.With SERVO GUIDE , quick and smart optimization of servo and spindle can be achieved.
High speed and high precision servo control
FSSB High-speed Rigid Tapping
Parameter Setting Support Screen
Servo Tuning Tools
Minimizing downtime
Fan motor is exchangeable from front side without removing amplifier from cabinet. Time for exchanging fan motor is reduced.
Easy exchange of fan motor
Fan motor may damage caused by Adhesion of cutting fluid or cutting chips. By monitoring rotation of fan motor fallen, abnormal level of fan motor can detect preventively and fan motor can exchange easily.
Fan motor rotation detection function
Trouble diagnosis function is prepared in combination with 0+-F or 30+-B series CNC.The diagnosis information which is useful for trouble shooting at the time of alarm occurrence can be seen on CNC screen¡Trouble diagnosis guidance screen¡Trouble diagnosis monitor screen¡Trouble diagnosis graphic screen
Time for exchanging fan motor reduced
Contribution to preventive diagnosis
Quick finding cases of alarms
Trouble diagnosis function
FSSB high-speed rigid tapping（Example）
1353ms
54p
50p
Synchronouserror
- Keeping high accuracy- Time const. for acc./dec.18.2% shorter
Applying maximum accelerationpower of spindle motor
1293ms
FunctionOFF
Spindle motorspeed
Servo motorspeed
Spindle torquecommand
FunctionON
SERVO HRV3 Control （Example）
5µm/div
Radius : 50mmFeed : 4000mm/min
6 7
¡Headquarters Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp
• All specifications are subject to change without notice.• No part of this catalog may be reproduced in any form.• The products in this catalog are controlled based on Japan's “Foreign Exchange and Foreign Trade Law". The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.
Worldwide Customer Service and SupportFANUC operates customer service and support network worldwide through subsidiaries and affiliates. FANUC provides the highest quality service with the prompt response at any location nearest you.
Maintenance and Customer Support
FANUC Training CenterFANUC Training Center operates versatile training courses to develop skilled engineers effectively in several days.Inquiries : Yamanakako-mura, Yamanashi, Japan 401-0501Phone : 81-555-84-6030Fax : 81-555-84-5540
High Performance and Value High Precision Servo
<#+ ! SERVO
Headquarters
London
ParisBarcelonaMilanBudapestSofia Bangalore
Beijing
ChicagoDalian
ChangwonTaipeiTaichung
Johannesburg
Detroit
Sao Paulo
StuttgartLuxembourg
IstanbulMoscow
Prague
ManilaBangkokHo Chi MinhKuala LumpurSingaporeJakarta
Sydney
Shanghai
Shen Zhen
World Wide Support Over 230 Offices
Servo βi(E)-13, 2014.10, Printed in Japan© < CORPORATION, 2001
¡America and South AmericaFANUC America Corporation Tel 1-847-898-5000 Fax 1-847-898-5001FANUC South America Equipment of Automation Service Ltd（Brazil） Tel 55-11-3952-8888 Fax 55-11-3856-0848¡Europe, the middle east and Africa FANUC Europe Corporation,S.A. Tel 352-727777-1 Fax 352-727777-202FANUC Deutschland GmbH Tel 49-7158-187400 Fax 49-7158-187455FANUC FA France SAS Tel 33-1-6989-7000 Fax 33-1-6989-7001FANUC FA UK LIMITED Tel 44-1895-634182 Fax 44-1895-676140FANUC FA Italia S.r.l. Tel 39-02-45795-1 Fax 39-02-45795-250FANUC FA Iberia S.A.U Tel 34-943-74-82-90 Fax 34-943-74-44-21FANUC FA Satıs ve Servis Tic. Ltd. Sti.（Turkey） Tel 90-216-651-1408 Fax 90-216-6511405FANUC FA Bulgaria Ltd. Tel 359-2-963-3319 Fax 359-2-963-2873FANUC CZech s.r.o. Tel 420-234-072-111 Fax 420-234-072-110FANUC FA Hungary Kft Tel 36-23-332-007 Fax 36-23-332-008FANUC SOUTH AFRICA (PTY) LIMITED Tel 27-11-392-3610 Fax 27-11-392-3615“FANUC AUTOMATION”LLC（Russia） Tel 7-495-956-9780 Fax 7-495-956-9785
FANUC FA Polska Sp. zo.o. Tel 48-71-7766-170 Fax 48-71-7766-179FANUC FA Nordic AB Tel 46-8-505-80-700 Fax 46-8-505-80-701FANUC FA Switzerland GmbH Tel 41-32-366-63-63 Fax 41-32-366-63-64¡Asia and Oceania KOREA FANUC CORPORATION Tel 82-55-278-1200 Fax 82-55-284-9826TAIWAN FANUC CORPORATION Tel 886-4-2359-0522 Fax 886-4-2359-0771BEIJING-FANUC Mechatronics CO., LTD. Tel 86-10-6298-4726 Fax 86-10-6298-4741FANUC INDIA PRIVATE LIMITED Tel 91-80-2852-0041 Fax 91-80-2852-8491FANUC THAI LIMITED Tel 66-2-714-6111 Fax 66-2-714-6120FANUC MECHATRONICS (MALAYSIA) SDN. BHD. Tel 60-3-7628-0110 Fax 60-3-7628-0220PT. FANUC INDONESIA Tel 62-21-4584-7285 Fax 62-21-4584-7288FANUC SINGAPORE PTE. LTD. Tel 65-6-220-3911 Fax 65-6-225-0098FANUC OCEANIA PTY. LIMITED Tel 61-2-8822-4600 Fax 61-2-8822-4666FANUC PHILIPPINES CORPORATION Tel 63-2-813-3155 Fax 63-2-813-3157FANUC VIETNAM COMPANY LIMITED Tel 84-8-3824-6638 Fax 84-8-3824-6637
