PIPES & FITTINGS

High Performance Piping System

India ki Waterline

P P R

VECTUS GROUP BRANDS Download the VECTUS app from

QR Code

VECTUS INDUSTRIES LIMITEDA -36, Sector 83, Noida 201305, UP • Tel.: 0120-4753200

E-mail: info@vectus.in • Toll Free: 1800 120 12345

www.vectus.in • CIN No: U25202MP2007PLC019781

Pan India Sales & Support Network

Welding Process

Measure and cut the pipe perpendicular to the pipe axis.

Step-1

Clean the socket heater and pipe with dry cloth. OWelding machine should be heated upto 260 C.

Step-2

Push pipe and the socket of fitting into the heater in axialdirection.

Step-3

After heating period, remove the fitting & pipe end from the heater and quickly join together in the axial direction.

Step-4

Mounting of the tools1. Assemble and tighten the cold welding tools

manually.2. Before fusing distribution blocks, where two

connections are welded at the same time, place the welding tool into the corresponding holes of the heating surface.

3. All welding tools must be free from impurities. Check if they are clean before assembling.

4. Place the welding tools on the welding device. Ensure that there is full surface contact between the welding tool and the heating surface.

5. Plug in the welding device. Depending on the ambient temperature, it takes 5-15 minutes to heat up the heating surface.

The heating up process is finished, when the temperature pilot light is switched on.

Heating up Phase7. During the heating up phase tighten the welding

tools carefully with the allan key. Take care that the tools are completely on the heating surface. Never use pliers or any other unsuitable tools, as this will damage the coating of the welding tools.

8. The necessary temperature to weld PPR-C 0system is 260 C.

ATTENTION: First welding - two minutes after reaching the welding temperature!

Tumkur

Trichy

Kashipur

Banmore

Kanpur

Bhopal

Indore

Raipur

Noida

Haridwar

Kolkata

Sikandarabad

Bangalore

Jaipur

Ahmedabad

Dahej

UnaJalandhar

Jammu

Corporate Office

Factory

Depot

Regional Sales Office

Welding Matrices (dies)

16, 20, 25, 32, 40, 50, 63, 75, 90, 110

Polyfusion Device

Hole Repair Matrice and Bar

7x11

Pipe Cutter

Reducer Socket

20x16, 25x20, 32x20, 32x25, 40x2040x25, 40x32, 50x32, 50x4063x25, 63x32, 63x40, 63x50

Reducing Tee

20x16x20, 25x20x25, 32x20x32, 32x25x32, 40x20x40 40x25x40, 40x32x40, 50x20x50, 50x25x50, 50x32x5050x40x50, 63x20x63, 63x25x63, 63x32x63, 63x40x6363x50x63, 75x25x75, 75x32x75,75x40x75, 75x50x7575x63x75, 90x32x90, 90x40x90, 90x50x90, 90x63x90

90x75x90, 110x25x110, 110x32x110, 110x40x110, 110x50x110, 110x63x110, 110x75x110, 110x90x110, 160x50x160, 160x63x160, 160x90x160, 160x110x160

Gate Valve

20, 25, 32, 40

Saddle

90x32, 110x32

Cross Tee

20, 25, 32, 40

Elbow 45°

20, 25, 32, 40

Flange Coupling

32, 40, 50, 63, 75

Union

20, 25, 32, 40, 50, 63

Ball Valve (heavy Duty)

20, 25, 32, 40, 50, 63, 90, 110

Ball Valve

20, 25, 32, 40, 50, 63, 75, 90, 110

Long / Short Plug

½”

Equal Tee

16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

oElbow 90

16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

Pipe Clip

20, 25, 32, 40, 50, 63

End Cap

16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

Coupler

16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

read Plug

20, 25

Tank Connection

20, 25, 32, 40, 50, 63

Reducing Elbow

25x20, 32x20, 32x25, 40x20, 40x25, 40x3250x25, 50x32, 50x40, 63x32, 63x50, 75x32

75x40, 75x50, 75x63

Vectus PPR pipes and �ttings are manufactured using Polypropylene Random Copolymer (PP-R), which is the most reliable polymer in the piping industry. Vectus PPR pipes and �ttings are physically superior, hygienic, safe and non-carcinogenic. e Pipes are manufactured as per IS 15801 and are available in PN 6, PN 10, PN 16 & PN 20

• e available range of pipes and �ttings varies from 16 mm to 160 mm.

• e pipes & �ttings are available in 3 different colours:

Features

Withstand up to 95°C

Low on Sound Anti Microbial

Low ermalExpansion

Economical Durable

Applications

Residential Purposes

Hot & Cold Plumbing

Carrying Drinking Water

Radiator Air Distribution

PIPING SYSTEMP P R

PPR Submersible Pipe

Grades

• Light • Economy • Medium • Heavy

Sizes: 32, 40, 50, 63, 75, 90, 110

Reducer Coupler

20x16, 25x16, 25x20, 32x16, 32x20, 32x25, 40x20, 40x25, 40x32, 50x20, 50x32

50x40, 63x40, 63x50, 90x32, 90x40 90x50, 90x63, 90x75, 110x50

110x63, 110x75, 110x90

Female Adapter Brassreaded - FABT

16x½”, 20x½”, 20x¾”, 25x½”, 25x¾”25x1”, 32x½”, 32x¾”, 32x1”, 32x1¼” 40x1¼”, 40x1½”, 50x1¼”, 50x1½”

63x2”, 75x2½”, 90x3”, 110x4”

Male Adapter Brass readed - MABT

16x½”, 20x½”, 20x¾”, 25x½”, 25x¾”25x1”, 32x½”, 32x¾”, 32x1”, 32x1¼”

40x1¼”, 50x1¼”, 50x1½”63x2”75x2½”, 90x3”, 110x4”

Male Elbow Brass readed - MEBT

16x½”, 20x½”, 20x¾”, 25x½”, 25x¾”25x1”, 32x½”, 32x¾”, 32x1”, 32x1¼”, 40x1¼”

Female Elbow Brass readed - FEBT

16x½”, 20x½”, 25x½”, 25x¾”25x1”, 32x½”, 32x¾”, 32x1”, 40x1¼”

Male Union Brassreaded - MUBT

20x½”, 25x½”, 32x1”, 40x1¼”

Female Union Brassreaded - FUBT

20x½”, 25x½”, 32x1”, 40x1¼”

16x½”, 20x½”, 20x¾”25x½”, 25x¾”, 25x1”, 32x½”

32x¾”, 32x1”, 32x1¼” 40x1¼”

Male Tee Brass readed - MTBT

16x½”, 20x½”, 20x¾”25x½”, 25x¾”, 25x1”, 32x½”

32x¾”, 32x1”, 32x1¼” 40x1¼”

Female Tee Brass readed - FTBT

20, 25

Cross Over

PPR PIPESSDR 6 PN 20: Available in lengths of 3 metersSize (mm): 16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

SDR 7.4 PN 16: Available in lengths of 3 metersSize (mm): 16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

SDR 11 PN 10: Available in lengths of 3 metersSize (mm): 16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 160

SDR 17.5 PN 6: Available in lengths of 3 metersSize (mm): 32, 40, 50, 63, 75, 90, 110, 160

Coil: 100 Meter available in 16, 20, 25 & 32

Available in lengths of 3 meters