High PurityChemical ResistantHose and Fittings

ContentsThe PTFE Advantage ...........................................................................3

STAMPED – Design and Applications Guide ......................................4

Effusion and Electro Static Discharge..................................................5

Medium Pressure Smooth Bore/Convoluted PTFE HoseSB/SW/CB/CW SERIES.........................................................................6

High Pressure/ Ultra-High Pressure PTFE HoseHP/UHP Series......................................................................................7

Fitting SpecificationsJIC/NPT ...............................................................................................8

Additional End Fitting Option for PTFE Hose....................................9

PFA Lined Silicone HosePTFE Expansion JointsPTFE Gaskets/Paddles/Blockers..........................................................10

Chemical Resistance Data ................................................................11

2

The PTFE AdvantageChemical Resistant

PTFE is inert to nearly all chemical, acids alcohols, coolants, petroleum compounds,

solvents vinyls, synthetic lubricates and hydraulic oils.

Temperature Resistant

From steam to cryogenics applications.

Cleaning

PTFE is easily cleaned by water flush, steam in place (S.I.P.), cleaned in place (C.I.P.) or

placed in an autoclave.

High Flow Rates

PTFE has a low coefficient with anti-stick properties insures lower pressure drop during

service with a good pressure rating and vacuum.

Flexible and Shock Resistance

Withstands continuous flexing, vibration or rapid rate impulse applications.

Moisture Resistant

Ideal for use as pigtails in gaseous handling and pneumatic systems where dew points

must be low.

Non-Aging

Unlimited shelf life because PTFE properties do not change with age or exposure to

weather.

Senior Flexonics warrants its assemblies to be free from any defects of workmanship and material. Our warranty shall not apply to our products if it has been installed, altered, repaired or misused, through negligence or other-wise, in a way that in the opinion of Senior Flexonics affects the reliability of, or detracts from the performance of the assembly. Nor does this warranty cover replacements or repairs necessited by loss of damage resulting from any cause beyond the control of Senior Flexonics, including but not limited to the acts of God, of govern-ment, floods and fire. The foregoing is in lieu of any warranties, expressed, implied or statuary.

Typical Hose ApplicationsHigh PuritySanitaryFood ProcessingDairyPharmaceuticalReverse Osmosis

Steel MillsR.I.M. SystemsChlorine TransferDehydratorsPulp And Paper

Compressed GasCryogenicsRefrigerationHot PressesPaint SystemsHydraulic

Power GenerationTurbinesPumpsGround SupportEngine

PackagingAutomotiveBusHigh PerformanceRacingAutoclaves

3

4

-––[ FLEXIBLE PTFE HOSE APPLICATION ]–-–DESIGN AND APPLICATION GUIDE

The selection of the correct is critical to insure optimum field performance. To accomplish this,there are a number of important applications requirements that must be known. The guide below will helpyou identify the requirements, and design the most cost effective, engineering sound product. The word“STAMPED” is useful as a checklist of applications requirements to be considered.

rof kcehc redisnoC• Size of existing piping and mating

fittings.• Flow requirements.

• Maximum service temperature of the application.

• Maximum allowable service temperature rating for hose and fitting alloys.

• Reduced operating pressures at elevated temperatures.

• Corrosion resistance of hose and fittingsalloys for the media conveyed.

• Maximum service temperature and pressure for the alloy selected.

• Type of motion-angular, axial, offset, radial, random, vibration, amount and frequency.

• Hose type best suited for application and motion, including external durability requirements.

• Cycle life requirement.

• Burst, test and operating pressure.• Constant, pulsating or shock pressures.

Operating pressure at elevated temperature.

• Braid selection to maximize pressure/minimize cost.

• Methods of attachment applicable to type and alloy of hose and fittings.

• Maximum temperature for alloys and methods of attachment.

• Minimum hose live length for type of motion.

• Hose assembly length with fittings (overall length).

STAM

PED

ize/Hose & Fittings

emperature

lloy/hose & Fittings

otion & Application

ressure

nd Fitting Attachment

eveloped AssemblyLength

NOTICE: This Engineering Guide is to assist you in the selection andapplication of flexible hose for your particular requirements.The information and data contained in this Engineering Guide arethe result of years of our experience and research in flexible metalhose. As such it is the best information and data available to us as ofthe date of printing. Progress is part of any dynamic program ofresearch and development, such as the company sponsors, so that allinformation and data contained herein are subject to change (with-out notice) at any time.

Should you be unable to determine a specification for a particularapplication, we solicit receiving details describing the application sothat we may make a recommendation. Because we do not superviseor control the installation and use our products, we cannot beresponsible for their performance or the improper applicationand usage of the data.

Senior Flexonics believes this information is considered reliable at time of print. It is intended for reference use only by persons having technical knowledge and the use of this information is at their own discretion and risk. Use of this information and our products are beyond our control, there are no implied warranties, expressed or otherwise and Senior Flexonics assumes no liability in connection with any use of this information.

* DO NOT USE stainless steel braided PTFE hose.

MATERIAL COMPATABILITY KEY: 1. Excellent 2. Acceptable 3. Not Recommended 0. No Information

EffusionA: Media will effuse and displace breathable air in a confined space.B: Media has the potential to effuse and, with no atmosphere, form chemicals that can corrode stainless steel wire braid and fitting material. Especially significant when “vapour phase” exists, ie, when they reach their boiling point of approximately 125°F at atmospheric pressure. Hose assemblies should be used in well vented areas only.C: Potential for effusion and can cause corrosion of the stainless steel wire braid reinforcement and fitting material. These chemicals are all gases at atmospheric pressure and at temperatures of 56°F or lower.

Electro Static DischargeIn many industrial plants there is an awareness that electro static discharge can be a hazard. This discharge is the result of two unlike materials coming into contact. This contact allows electrons from one material to move across its boundary and associate with the other. For example, electrons from steam can align themselves with the wall of the PTFE surface. If both materials are good conductors of electricity the positive and negative electrons flow back and forth between the chemical and the PTFE wall keeping them in balance. However, if one or both of them are insulators, the balance will be disrupted. The result is chemicals such as gasoline or steam following through a white PTFE surface will deposit electrons on the wall of the innercore building up a static charge. When the static charge exceeds the dielectric strength of the PTFE wall, dielectric breakdown occurs.

As a general rule a carbon black lined PTFE innercore should be used in these applications.

5

SMOOTHE BORE MED. PRESSURE PTFE HOSE

A smooth bore PTFE stainless steel wire reinforced hose designed for high purity applications and chemical extremes. An excellent choice for pharmaceutical, food and beverage applications.

Standard fitting material is stainless steel or brass.

CONVOLUTED PTFE HOSE

Self draining helical PTFE stainless steel wire reinforced hose ideal for demanding high purity and chemical applica-tions. Polypropylene and Kynar® braid reinforcement is available.

Standard fitting material is stainless steel, steel and Halar encapsulated.

Hose Type Nominal Size I.D. O.D. Min. Bend Radius Operating Pressure Min. Burst Presure (in) (in) (in) (in) (psi) (psi)

Hose Type Nominal Size I.D. O.D. Min. Bend Radius Operating Pressure Min. Burst Presure Max. Length (in) (in) (in) (in) (psi) (psi)

SB-03 SW-03 3/16 0.125 0.234 2 3,000 15,000SB-04 SW-04 1/4 0.187 0.312 2 3,000 14,000SB-05 SW-05 5/16 0.0250 0.375 3 3,000 13,000SB-06 SW-06 3/8 0.312 0.445 4 2,500 12,000SB-08 SW-07 1/2 0.406 0.649 5.2 2,000 9,000SB-10 SW-08 5/8 0.500 0.648 6.5 1,500 8,500SB-12 SW-09 3/4 0.625 0.778 7.7 1,200 6,000SB-16 SW-10 1 0.875 1.030 9 1,000 4,000SB-20 SW-11 1 1/4 1.125 1.315 16 800 3,200

SB-BLACK (NON-CONDUCTIVE) SW-WHITE

CW-08 CB-08 1/2 0.512 0.785 1 1,000 4,000 75 CW-12 CB-12 3/4 0.750 1.090 2 1,000 4,000 50CW-16 CB-16 1 0.998 1.300 3 1,000 4,000 50CW-20 CB-20 1 1/4 0.239 1.560 6.25 1,500 4,000 50 CW-24 CB-24 1 1/2 0.500 1.792 7.5 750 3,000 50CW-32 CB-32 2 0.982 2.333 10 500 2,500 50

CB-BLACK (NON-CONDUCTIVE) CW-WHITE

6

HIGH PRESSURE & ULTRA HIGH PRESSURE PTFE HOSE

Our ultra-high pressure hose series is constructed with a carbon black anti-static (conductive) PTFE post-sintered inner core and stainless steel wire braid reinforcement. The MHP and UHP series hose is the premiere product for rapid rate impulse applications. This product is ideal for use in the gas industries and heavy duty applications.

We offer high pressure PTFE hose in both post-sintered (for gaseous and heavy duty applications) and nonpost-siintered (for most indus-trial applications) options.

Temperature rating: -65°F to 450°F

Hose Type

Size(in)

Hose Type

Nominal Size(in)

Thread

Nominal Size(in)

I.D.(in)

Nominal I.D.(in)

I.D.(in)

O.D.(in)

O.D.(in)

Min. Bend Radius(in)

Min. Bend Radius(in)

Operating Pressure(psi)

Operating Pressure(psi)

Min. Burst Pressure(in)

Min. Burst Pressure(in)

UHP-04UHP-06UHP-08

1/43/81/2

HP-04HP-06HP-08HP-10HP-12HP-16HP-20HP-24

1/43/81/2

7/16 - 209/16 - 183/4 - 16

1/43/81/25/83/411 1/41 1/2

0.2290.3000.395

0.1460.2710.365

0.2220.3080.4010.4950.6170.8671.1181.375

0.4950.6170.738

0.3900.4900.6150.7301.9901.2701.6601.900

356

1.52.52.93.33.95.012.014.0

6,0006,0006,000

5,0005,0005,0005,0005,0005,0005,0004,000

24,00024,00024,000

16,00016,00016,00016,00016,00016,00016,00012,000

7

PROGRESSIVE-SWAGEDSTAINLESS STEEL FITTINGS

STAINLESS STEEL WIREINNER BRAID

STAINLESS STEEL WIRESPIRAL WRAP NO.1

POSITIVE BRAID LOCK STAINLESS STEEL WIRESPIRAL WRAP NO.2

PTFE INNERCORE

HIGH PRESSURE FITTINGS - JIC FEMALE SS SWIVEL (37 SWIVEL)

Fitting Specifications

Hose Size Dash Size

Hose Size Dash Size

Hose Size Dash Size

Hose Size Dash Size

Thread

Thread

Thread

Thread

Nominal ID

Nominal ID

Nominal ID

Nominal ID

1/41/45/163/83/81/21/25/83/41

-02-02-05-06-06-08-08-10-12-16

1/45/163/81/25/83/41

-02-05-06-08-10-12-16

1/23/411 1/41 1/22

-08-12-16-20-24-32

1/23/411 1/41 1/22

-08-12-16-20-24-32

1/8 - 271/4 - 181/4 - 181/4 - 183/8 - 183/8 - 181/2 - 141/2 - 143/4 - 141 - 11.5

7/16 - 201/2 - 209/16 - 183/4 - 167/8 - 141 1/16 - 121 5/16 - 12

1/2 - 143/4 - 141 - 11 1/21 1/4 - 11 1/21 1/2 - 11 1/212 - 11 1/2

1/2 - 143/4 - 141 - 11 1/21 1/4 - 11 1/21 1/2 - 11 1/212 - 11 1/2

.156

.156

.207

.277

.277

.358

.358

.469

.594

.812

.156

.207

.277

.358

.469

.594

.812

.378

.630

.8491.0691.3061.756

.378

.630

.8491.0691.3061.756

Male Pipe, Smooth Bore Series

Female JIC Swivel, Smooth Bore Series

Male Pipe SS, Convoluted Series

Female JIC Swivel SS, Convoluted Series

8

SANITARY

FLANGES CAM LOCK

THREADED

STYLE 40Sanitary

STYLE 44Sanitary x Male Cam

STYLE 05Flange Retainer

STYLE 03NPT Male Hex Pipe

STYLE 41Sanitary Step-Up

STYLE 48J-Line Male

STYLE 25Flange Retainer (PFA)

STYLE 30Jic Female Swivel

STYLE 42Sanitary Mini

STYLE 49J-Line Female

STYLE 29Flare Thru Flange

STYLE 33NPT Male Union

STYLE 40USanitaryFlare Thru

STYLE 38Compression Adapter

STYLE 07Female Type “D”

STYLE 06NPT Female Hex Pipe

STYLE 45Bevel Seat - Female

STYLE 38Comp. Connector with Nut

STYLE 08Male Type “E”

JIC - NPTAdapter

STYLE 46Bevel Seat - Male

STYLE 31O-Ring Female Swivel D

9

Please consult your nearest Senior Flexonics PTFE sales rep for information on these fittings as additional option for your applications.

Additional end fittingsoptions for PTFE hose

PURESITE™ Sight Glass

• ThickwalltranslucentextrudedFEPtube• Designedforsafevisualinspection• Willnotimparttaste,anycolourorodortofluidmedia• Smoothnon-sticksurfacewillnottrapbacteria• Fullyresistanttoarangeofcorrosivechemicals Temperature rating: -100°F to 250°F

PTFE EXPANSION JOINTS

• 1/2”to42”pipesizewithlimitlinkdesign• 2through10convolutionswithconstantuniformwall thickness for any size• LowspringtoprotectstresssensitiveFRP,glassorgraphite equipment• T-bandshelpstoprotectthejointagainstexternaldamaged and limits the total axial movement in compressionTemperature rating: maximum 400°F

10

PureFusion™ - High PurityPFA Lined Silicone Hose

TASK-LINE® GASKETS

• 1/2”through24”inclass150lband300lbrating• 1/8”or3/32”thickness(otherthicknessesavailable)• Self-aligningandseateasilytoanyflangeinalmost any condition• The PTFE encapsulated metal insert restricts the PTFE from coldflow/creepwhileunderloadTemperature rating: cryogenic to 400°F

TASK-LINE® GROUNDING PADDLES

• Mouldedin1”through6”ANSIclass150lb (other sizes are available)• 1/8”thickness• Paddlehandleextends2”abovetheflange• Pre-drilledforgroundinghardware• Cableincluded

TASK-LINE® LINE BLOCKERS

• 1”through6”inANSIclass150lbrating• Easyremovalwiththeintegralmouldedpaddlehandles• 1/8”thickness• Handleextends2”abovetheflange• 3/8”pre-drilledholefortagging(whileinservice) or for hanging (while in storage)Temperature rating: cryogenic to 400°F

Chemical Resistance Data

Senior Flexonics believes this information is considered reliable at time of print. It is intended for reference use only by persons having technical knowledge and the use of this information is at their own discretion and risk. Use of this information and our products are beyond our control, there are no implied warranties, expressed or otherwise and Senior Flexonics assumes no liability in connection with any use of this information.

* DO NOT USE stainless steel braided PTFE hose.

Acetaldehyde 1 1 BAcetic Acid, Glacial 1 2Acetic Acid, 30% 1 2Acetic Anhydride 1 2Acetone 1 1Acetylene1 1 1 CAcrylonitrile 1 1Alum. Ammonium or Potassium 1 2Aluminum Acetate 1 1Aluminum Bromide 1 2Aluminum Chloride 1 2Aluminum Fluoride 1 2Aluminum Hydroxide 1 1Aluminum Nitrate 1 1Aluminum Salts 1 2Aluminum Sulfate 1 2Ammonia, Anhydrous 1 2Ammonia, Aqueous 1 1Ammonium Carbonate 0 1Ammonium Chloride 1 2Ammonium Hydroxide 1 1Ammonium Metaphosphate 1 1Ammonium Nitrate 1 1Ammonium Nitrite 0 1Ammonium Persulfate 0 1Ammonium Phosphate 1 1Ammonium Sulphate 1 1Ammonium Thiocyanate 1 1Amyl Acetate 1 1Amyl Alcohol 1 1Amyl Chloride 1 1Amyl Chloronaphthalene 1 1Amyl Naphthalene 1 1Aniline 1 1Aniline Dyes 1 1Aniline Hydrochlorde 1 3Animal Fats 1 1Aqua Regia 1 3Arsenic Acid 1 1Askarel 0 1Asphalt 1 1Barium Carbonate 1 1Barium Chloride 1 1Barium Hydroxide 1 1Barium Sulphate 1 1Barium Sulfide 1 1Beer 1 1Beet Sugar Liquors 1 1Benzene 1 1Benzenesulfonic Acid 0 2Benzaldehyde 1 0Benzine 1 1 BBenzyl Alcohol 1 1

Benzyle Benzoate 1 1Benzyl Chloride 1 0Bismuth Carbonate 1 1Black Sulfate Liquor 1 1Blast Furnace Gas 1 1 CBorax 1 1Bordeaux Mixture 1 1Boric Acid 1 1Bunker Oil 1 1Butadiene 1 1Butane 1 1 CButter Oil 1 1Butyric Acid 1 1Butyl Acetate 1 1Butyl Alcohol 1 1Butyl Amine 0 1Butyl Carbitol 1 1Butyl Stearate 1 1Butyl Mercaptan 1 1Butyraldehyde 1 0Calcium Acetate 1 1Calcium Bisulfate 1 1Calcium Bisulfite 1 1Calcium Carbonate 1 1Calcium Chlorate 1 1Calcium Chloride 1 1Calcium Hydroxide 1 1Calcium Hypochlorite 1 2Calcium Nitrate 1 1Calcium Silicate 1 1 BCalcium Sulfate 1 1Calcium Sulfide 1 1Cane Sugar Liquors 1 1Carbolic Acid 1 1Carbon Dioxide 1 1 ACarbon Disulfide 0 1Carbonic Acid 1 1Carbon Monoxide 1 1 CCarbon Tetrachloride 1 2Caster Oil 1 1Caustic Soda 1 1Cellosolve, Butyl 1 1Cellulube 1 1Chlorine, Gaseous, Dry* * 3 CChlorine, Gaseous, Wet* * 3 BChloroacetic Acid 1 1Chlorobenzene 1 1Chlorobromomethane 1 1Chloroform 1 1O-hloronaphthalene 1 1Chlorotoluene 1 1Chromic Acid 1 2Citric Acid 1 1

CHEMICAL PTFE T316 EFFUSION

MATERIAL COMPATABILITY KEY: 1. Excellent 2. Acceptable 3. Not Recommended 0. No Information

CHEMICAL PTFE T316 EFFUSION

11

Chemical Resistance Data

Senior Flexonics believes this information is considered reliable at time of print. It is intended for reference use only by persons having technical knowledge and the use of this information is at their own discretion and risk. Use of this information and our products are beyond our control, there are no implied warranties, expressed or otherwise and Senior Flexonics assumes no liability in connection with any use of this information.

* DO NOT USE stainless steel braided PTFE hose.

Cod Liver Oil 1 1Coke Oven Gas 1 1 CCopper Chloride 1 1Copper Cyanide 1 1Copper Sulfate 1 1Corn Oil 1 1Corn Syrup 1 1Cottonseed oil 1 1Creosote 1 1Cresol 1 1Crude Wax 1 1Cutting Oil 1 1Cyclohexane 1 1Cyclohexxanone 1 1Cymene 1 0Decalin 1 0Denatured Alocohol 1 1Diacetone 1 1Diacetone Alcohol 1 1Dibenzyl Ether 1 1Dibutyl Ether 1 1Dibutyl Phthalate 1 1Dibutyl Sebacate 1 0Dichlorobenzene 1 1Diesel Oil 1 1Diethylamine 1 2Diethyl Ether 1 1 BDiethylene Glycol 1 1Diethyl Phthalate 1 1Diethyl Sebacate 1 1Di-Isobutylene 0 1Di-Isopropyl Ketone 1 1Dimethyl Aniline 1 0Dimethyl Formamide 0 1Dimethyl Phthalate 1 0Dioctyl Phthalate 1 1Dioxane 1 1Dipentene 1 1Ethanolamine 1 1Ethyl Acetate 1 1Ethyl Acetoacetate 1 1Ethyl Acrylate 0 1Ethyl Alcohol 1 1Ethyl Benzene 1 1Ethyl Cellulose 1 1Ethyl Chloride 1 1 CEthyl Ether 1 1Ethyl Mercaptan 1 0 BEthyl Pentochlorobenzene 1 1Ethyl Silicate 1 1Ethylene Chloride 1 1Ethylene Chlorohydrin 1 0Ethylene Diamine 1 0

Ethylene Glycol 1 1Fatty Acids 1 1Ferric Chloride 1 3Ferric Nitrate 1 1Ferric Sulfate 1 1Ferrous Chloride 1 1Ferrous Nitrate 1 1Ferrous Sulfate 1 1Fluoroboric Acid 1 1Formaldehyde 2 1Formic Acid 2 1Freon 12 0 2 AFreon 114 1 1 AFuel Oil 1 1Fumaric Acid 1 1Furan Furfuran 1 1Furfural 1 1Gallic Acid 1 1Gasoline 1 1Glauber’s Salt 0 1Glucose 1 1Glue 1 1Glycerin 1 1Glycols 1 1Green Sulfate Liquor 1 1n-Hexaldehyde 1 1Hexane 1 1Hexene 1 1Hexyl Alcohol 1 1Hydraulic Oil, Petroleum 1 1Hydrocloric Acid, 15% 1 3 BHydrocloric Acid, 37% 1 3 BHydrocarbon Acid 1 1 CHydrofluoric Acid, Concentrated 1 3Hydrofluosilicic Acid 1 3Hydrogen Gaseous * 1 CHydrogen Peroxide, 70% 1 1Hydrogen Sulfide, Gaseous 1 1 CHydroquinone 0 1Isobutyl Alcohol 1 1Iso Octane 1 1Isopropyl Acetate 1 1Isopropyl Alcohol 1 1Isopropyl Ether 1 1Kerosene 1 1Laquers 1 1Lacquer Solvents 1 1 BLatic Acid 1 1Lard 1 1Lead Acetate 1 1Lead Nitrate 0 1Lime Bleach 0 1Linoleic Acid 1 0

CHEMICAL PTFE T316 EFFUSION

MATERIAL COMPATABILITY KEY: 1. Excellent 2. Acceptable 3. Not Recommended 0. No Information

CHEMICAL PTFE T316 EFFUSION

12

13

Chemical Resistance Data

Senior Flexonics believes this information is considered reliable at time of print. It is intended for reference use only by persons having technical knowledge and the use of this information is at their own discretion and risk. Use of this information and our products are beyond our control, there are no implied warranties, expressed or otherwise and Senior Flexonics assumes no liability in connection with any use of this information.

* DO NOT USE stainless steel braided PTFE hose.

Linseed Oil 1 1Lubricating Oils, Petroleum 1 1Magnesium Chloride 1 1Magnesium Hydroxide 1 1Magnesium Sulfate 1 1Malic Acid 1 1Mercuric Chloride 1 1Mercury 1 1Mesityl Oxide 1 1Methyl Acetate 1 1Methyl Acrylate 0 1Methol Alcohol 1 1Methyl Bromide 1 1 BMethyl Butyl Ketone 0 1Methyl Chloride 1 1 BMethylene Chloride 1 1Methyl Ethyl Ketone (MEK) 1 1Methyl Formate 1 1 BMethyl Isobutyl Ketone 1 1Methyl Methacrylate 1 1Methyl Salicylate 1 1Milk 1 1Mineral Oil 1 1Monochlorobenzene 1 1Monoethanolamine 0 1Naphthalene 1 1Naphthalene 1 1Naphthenic Acid 1 1Natural Gas 1 1 CNickel Acetate 1 1Nichel Chloride 1 2Nickel Sulfate 1 1Niter Cake 0 1Nitric Acid, All Concentrations 1 2Nitric Acid, Red Fuming 1 2Nitrobenzene 1 1Nitroethane 1 1Nitrogen, Gaseous 1 1 ANitrogen Tetroxide 0 2n-Octane 0 1Octyl Alcohol 1 1Oil, SAE 1 1Oleic Acid 1 1Olive Oil 1 1Oxalic Acid 1 1Oxygen, Gaseous 1 1 AOzone 1 1Paint 1 1Palmitic Acid 1 1Peanut Oil 1 1Perchloric Acid 1 1Perchloroethylene 1 1Petroleum 1 1

Phenol 1 1Phorone 1 1Picric Acid 1 1Pinene 1 1Pine Oil 1 1Plating Solution, Chrome 1 3Potassium Acetate 1 1Potassium Chloride 1 1Potassium Cyanide 1 1Potassium Dichromate 1 1Potassium Hydroxide, 30% 1 1Potassium Nitrate 1 1Potassium Sulfate 1 1Propane 1 1 APropyl Acetate 0 1Propyl Alcohol 1 1Pyridine, 50% 1 1Red Oil 1 1Salicylic Acid 0 1Salt Water 1 1Sewage 1 1Silicone Greases 0 1Silicone Oils 0 1Silver Nitrate 1 1Skydrol 500 & 7000 1 1Soap Solutions 1 1Soda Ash 0 1Sodium Acetate 1 1Sodium Bicarbonate 1 1Sodium Bisulfite 1 1Sodium Borate 1 1Sodium Chloride 1 1Sodium Cyanide 1 1Sodium Hydroxide, 40% 1 1Sodium Hypochlorite 1 2Sodium Metaphosphate 1 1Sodium Nitrate 1 2Sodium Perborate 1 1Sodium Peroxide 1 1Sodium Phosphate 1 1Sodium Thiosulfate 1 1Soybean Oil 1 1Stannic Chloride 1 0Steam 1 1 ASteric Acid 1 1Stoddard Solvent 1 1Styrene 1 2Sucrose Solution 1 1Sulfur, 200°F 1 1Sulfur Chloride 1 2Sulfur Dioxide 1 1 BSulfur Trioxide 1 2 BSulfuric Acid, 10% 1 2

CHEMICAL PTFE T316 EFFUSION

MATERIAL COMPATABILITY KEY: 1. Excellent 2. Acceptable 3. Not Recommended 0. No Information

CHEMICAL PTFE T316 EFFUSION

Chemical Resistance Data

Sulfuric Acid, 98% 1 2Sulfuric Acid, Fuming 1 1Sulfurous Acid, 10% 1 1Sulfurour Acid, 75% 1 2Tannic Acid, 10% 1 1Tar, Bittuminous 1 1Tartaric Acid 1 2Terpineol 1 0Titanium Tetrachloride 0 2Toluene 1 1Toluene Diisocyanate 0 0Transformer Oil 1 1Transnission Fluid, Type A 1 1Tributoxyethyl Phosphate 1 0Tributyl Phosphate 1 0

Trichloroethylene 1 1Tricresyl Phosphate 1 2Tung Oil 1 1Turpentine 1 1Urea Solution, 50% 1 1Varnish 0 1Vegtable Oils 1 1Versilube 1 1Vinegar 1 1Vynyl Chloride 1 1 cWhiskey, Wines 1 1Xylene 1 2Zinc Acetate 1 1Zinc Chloride 1 1Zinc Sulfate 1 1

CHEMICAL PTFE T316 EFFUSION CHEMICAL PTFE T316 EFFUSION

14

Notes

Head Office/PlantSenior Flexonics Canada134 Nelson Street WestBrampton, Ontario L6X 1C9Phone: 905 451 1250Toll Free: 800 267 1975Fax: 905 451 1315

Western CanadaSenior Flexonics Canada6041 4th Street SECalgary, Alberta T2H 2A5Phone: 403 253 7919Toll Free: 800 342 2320Fax: 403 253 7921

Eastern CanadaSenior Flexonics Canada1075 Autoroute Laval, 440 OuestLaval, Québec H7L 3W3Phone: 450 629 5301Toll Free: 877 629 5301Fax: 450 629 0734

Distributed By:

3500-CAN-07/11

Other Products fromSenior Flexonics

Metal Expansion JointsRubber Expansion Joints

Fabric Duct Expansion JointsCompressed Gas Components

Cryogenic Tank RepairHVAC Components