High Viscosity Technology
Buss-SMS-Canzler
2
Buss-SMS-CanzlerCore Competence High Viscosity Technology
Positive displacement discharge
Buss-SMS-Canzler is a leading inter-national supplier of thermal separa-tion solutions for difficult productsand mixtures. We are the world's lea-ding supplier of thin film evaporationtechnology. This is due to the long-standing experience and expertise ofthe four former companies Luwa,SMS, Buss and Canzler. This long ex-perience and expertise is now incor-porated into Buss-SMS-Canzler.
For our customers around the worldwe develop and manufacture machi-nes and plants for evaporation, pro-cessing of highly viscous materials,membrane filtration and drying. Ourexperience and our test centre allowus to develop customer specific pro-cess solutions by applying tailor-made equipment and completesystems.
Buss-SMS-Canzler partners you asconsultant, designer and manufactu-rer through all project stages: fromthe process layout, pilot tests, engi-neering, mechanical design, manu-facturing and documentation, toinstallation, start up and after salesservice.
High Viscosity Technology:Joint successBuss-SMS-Canzler supplies Thin FilmProcessors and Large Volume Proces-sors for your highly viscous products.As a special service, we offer our cus-tomers the joint development of com-plex applications with utilisation ofour comprehensive resources, such asrental units, test centre, process engi-neering and design department.
FILMTRUDER® rotor details
3
High Viscosity Technology at a Glance
Our High Viscosity Technology withThin Film Processors and Large Vo-lume Processors is utilised for the ther-mal treatment in polymer productionand in post-reaction treatment.
Typical processes are• Polymerisation• Polycondensation• Devolatilization, including the removal of monomers, solvents, and reactants from a variety of viscous products• Compounding/Reactive compounding• High viscosity mixing• Crystallization• Sublimation• Combinations of the above
Products includedin these processes are• Acrylic resins• Adhesives• Biopolymers• Chemical intermediates• Detergents• Elastomers• Engineered thermoplastics• Fibres• Foods including fruit purees, sugars and cheeses• High performance polymers• Phenolic resins• Polyesters• Resources recovery - waste volume reduction• Silicones• Styrene co-polymers
To achieve the best process solution,combinations with state-of-the-art tech-nologies such as flash evaporationand extrusion are made. Our owntechnologies comprise key equipmentwith integrated application tailoredproduct feed, discharge systems anddrives.
Static evaporators Agitated Thin Film Processors
VISCON®
und FILMTRUDER®
Vertical Vented Extruder
Large Volume ProcessorHorizontalThin Film Processor
Pre-Concentration Concentration Devolatilization Trace DevolatilizationViscosity (Pa·s) 1 50 10.000 20.000 50.000
Flashevaporator
Shelland TubeEvaporator
Pre-Reaction Polycondensation Polymerisation
4
Thin Film Processors and Large Volume Processors:Economic Production for High Quality Products
low product hold-up allows the sepa-ration of large volatile rates in a sin-gle stage.
Large Volume ProcessorsThe Large Volume Processor programconsists of horizontally arranged, hea-ted reactors with either a single ortwin (co- or counterrotating) shaft wichprovide intensive mixing and knea-ding.
The highly versatile Large Volume Pro-cessors are characterised by large pro-cess volumes and self-cleaning. Theyallow for the efficient treatment of dif-ficult and/or phase changing products.
Large Volume Processors allow for theeconomic realisation of long resi-dence times and the combination ofvarious process steps in the same unit.
FILMTRUDER® rotor in test facilityREACOM®
Operation WindowThin Film Processors Large Volume Processors
Heating temperature 20 - 400°C 20 - 350°CProduct temperature 20 - 380°C 20 - 350°CPressure (heating side) Up to 70 bar Up to 12 barPressure (process side) < 1 mbar - 30 bar < 1 mbar - 5 barProduct viscosity 20-10.000 Pa·s 20-15.000 Pa·s /solidsResidence time Up to 15 min. Up to 2 hoursProduct capacity 20 -15.000 kg/h 2 -15.000 kg/hOperation mode Continuous Batch or continuous
Thin Film ProcessorsThe FILMTRUDER® and VISCON® ThinFilm Processors produce a mechani-cally agitated thin product film whichis distributed over the inner surface ofa vertical heated cylinder by a rotor.The rotor continuously agitates thefilm, creating surface renewal and re-sulting in high heat flux and masstransfer. The rotor blades are desig-ned to propel the product down thecylinder walls. Volatile componentsare rapidly evaporated. The largefree vapour space in relation to the
5
Large Volume ProcessorsBased on new developments our re-cently developed program of high vis-cosity Large Volume Processors hasbeen further improved.
No. of shafts
Rotation direction
Speed ratio
Plug flow
REASILREACOM®REACTOTHERM®
1
-
-
+
2
co-current
1:1
+++
2
counter-current
1:1
+++
REACTOTHERM® with high torque hydraulic drives used for rotor,side-feeder and discharge screws
6
Development:Special Processes for Special Products
In close cooperation with our custo-mers we identify the need and deve-lop customised process solutions. Weassist you as reliable developmentpartner from the product idea throughthe entire process and technology de-velopment work to the optimised qua-lity production.Our test equipment can be scheduledfor use in our test centre or rented foruse in your facility.
Rental unit of Large Volume Processorused as batch reactor REACTOTHERM® for pilot trials
Identifying the Need - Developing the Solution
Purpose Description
PES - Preliminary Evaluation of client specifications on product and process, Evaluation Study cross-check with our comprehensive data base,
review of product properties on laboratory scale equipment
Bench scale Feasibility tests at our test centre using pilot scale Thin Film Processors, single or twin-shaft batch or continuous Large Volume Processor
Design Study Demonstration tests at our test centre or at customer's facility usingThin Film Processors or batch or continuous Large Volume Processors,for the commercial design
7
Applications:Concentration, Reaction, Mixing and Devolatilization
FILMTRUDER® co-current• Concentration from 10% polymer up to 95% polymer in one single stage• No product entrainment• Ideally suited as pre-stage upstream to the final devolatilization
Large Volume Processor• Polymerisation, single stage with high monomer yield• Mixing/compounding, can handle wet powder• Devolatilization of shear sensitive elastic products
Discharge section of FILMTRUDER®
Vapours
Value ProductFeed
Vent
Condensate
HeatTransferMedium
HeatTransferMedium High Viscous
Polymer/Solid PolymerGranules
Concentration of polymer solutions
Typical plant design of Large Volume Processors
Buss-SMS-Canzler
Head Office & WorkshopBuss-SMS-Canzler GmbHKaiserstraße 13-15D-35510 ButzbachPhone: +49 60 33 - 85 - 0Fax: +49 60 33 - 85 - 249
Branch Office & Test CenterBuss-SMS-Canzler GmbHHohenrainstraße 10CH-4133 Pratteln 1Phone: +41 61 82 - 56 - 869Fax: +41 61 82 - 56 - 766
email: [email protected] www.sms-vt.com
Branch OfficeBuss-SMS-Canzler GmbHAm Langen Graben 7D-52353 DürenPhone: +49 24 21 - 705 -1Fax: +49 24 21 - 705 - 80
© 2
012
•w
erbe
agen
tur-n
ow.d
e