A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Sale Date: Thursday, July 23rd • 10:00 am Local TimeMaitland, ON, Canada

WEBCAST/ONSITE AUCTIONHilco® Industrial

FeaturingCompounding/Pelletizing Lines,Blending & Packaging Lines

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)2

HilcoTM Industrial

COMPOUNDING/PELLETIZING LINES1 – BUSS KNEADER 100MM PELLETIZING LINE,

Consisting Of: MKS 100-20 P110 100mmKneader Extruder, 20 to 1 L/D Ratio, S/N 99-430-860, (1999), (7) Barrel Sections with Feed, BussModel IS 100 Crammer Feeder with Hopper, TopVented, Side Feed with 80mm Buss Twin ScrewSide Feeder, Model SF80, Electrically HeatedWater Cooled with Closed Loop System, withPump, Tank, and Heat Exchanger, 42" CenterlineHeight, 400 HP, 500 Volt, 1750/2000 RPM MotorThru a L. Kissling Gearbox, Type VZD-210 GL-V,Buss Lube System, Kinney Vacuum Pump,Tuthill Vacuum Pump, Reliance Drive Panel,Temperature Panel, 550 KVA Transformer, 145KVA Transformer, Melt Pump, Die Head with 30Hole & 45 Hole Strand Die Inserts, Design &Fabrication Wire Mesh Strand Belt CoolingConveyor, 20" Wide x 234" Long with (6) SprayBars, 20" Air Knife with Blower, Motorized InclineAdjustment, Bottom Holding Tank, AC GrindingStrand Pelletizer with 16" Wide 40 Fixed KnifeHelical Rotor, Rubber & Metal PneumaticallyAdjustable Pull Rolls, Vibra Screw stainless steelVibra Blender, Witte Vibratory Pellet CoolerScreener, Stainless Steel, Fisher-KlotermanCyclones, size 20, Exhaust Blower with Motor,(5) K-Tron Screw Feeders, (2) PCE Sales &Engineering 6" Diameter Stainless Steel ScrewConveyor Feeders

Compounding/PelletizingLines to be Sold in Bulk,

Subject to Piecemeal

FUrTHEr INFOrMATION• An 18% BUYeR'S PReMiUM Will Be cHARged on All ASSeTS.

• AUcTion Will Be condUcTed in engliSH, AccePTing U.S. cURRencY onlY.

• ReMoVAl deAdline iS FRidAY, AUgUST 14TH WiTH HoURS oF ReMoVAl BeTWeen 9AMTo 4PM MondAY THRU FRidAY. BUYeRS WiTH iTeMS leFT on SiTe AFTeR deAdlineARe SUBJecT To FineS oF $500 PeR dAY.

MACHINErY &  EQUIPMENT

MARK ReYnoldS 205-403-5942 • MReYnoldS@HilcogloBAl.coMPAYMENT INFOrMATION

leSiA JoSePH 616-328-6892 • lJoSePH@HilcogloBAl.coMHilco AccoUnTS ReceiVABle AT AR-gR@HilcogloBAl.coMCUSTOMEr SErvICE

+1 877-37-Hilco • +1 616-732-1800 • inFo@Hilcoind.coM

information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

WEBCAST/ONSITE AUCTION

COMPOUNDING/PELLETIZING LINES

AUCTION DATE

THURSdAY, JUlY 23Rd

Beginning AT 10AM locAl TiMe

PrEvIEw DATE

TUeSdAY & WednSdAY, JUlY 21ST

& 22nd

9AM To 4PM locAl For eArlier inspeCtion, pleAse ContACt MArk reynolds At 205-403-5942 or eMAil Mreynolds@HilCoGloBAl.CoM

AUCTION &  PrEvIEw LOCATION#1400, HWY #2 eAST MAiTlAnd, on, cAnAdA K0e 1P0

REGISTERTO BID AT

For more information, please visit us on the web at www.hilcoind.com/maitland 3

COMPOUNDING/PELLETIZING LINES

COMPOUNDING/PELLETIZING LINES, cont.1 – CENTURY 92MM TWIN SCREW PELLETIZING LINE,

Consisting Of: CX-92 92mm Co-Rotating Twin Screw Extruder,36 to 1 L/D ratio, S/N 1210212, (Rebuilt 2004), (9) Barrel Sectionswith Feed with Hopper, Top Vented, Electrically Heated WaterCooled with a Closed Loop System with Pump, Tank, and HeatExchanger, 43" Centerline Height. Driven by a 700 HP, 575 Volt,1790 RPM Motor thru an Eisenbeiss Gearbox, Type ZG76-CX92,Werner & Pfleiderer 70mm Twin Screw Side Feeder, KinneyVacuum Pump, Siemens Drive Panel, Temperature Panel, 800KVA Transformer,150 KVA Transformer, Die Head, Design &Fabrication Wire Mesh Strand Belt Cooling Conveyor, 19" Wide x238" Long with (13) Spray Bars, 20" Wide Air Knife with Blower,Motorized Incline Adjustment, Bottom Holding Tank, StrandPelletizer 16" Wide 40 Fixed Knife Helical Rotor, (2) MetalPneumatically Adjustable Pull Rolls, Witte Vibratory Screener,Stainless Steel, Ducon Type VM Cyclone with Exhaust Blower, (2) K-Tron Weigh Belt Feeder, (3) K-Tron Screw Feeders

1 – WERNER & PFLEIDERER 92MM TWIN SCREW PELLETIZINGLINE, Consisting Of: ZSK-92 W385E 92mm Co-Rotating TwinScrew Extruder, Approximate 36 to 1 L/D Ratio, S/N 226877,(1987), (9) Barrel Sections with Feed With Hopper, (2) TopVented, Side Feed, Electrically Heated Water Cooled with ClosedLoop System with Pump, Tank, and Heat Exchanger, Approximate43" Centerline Height. Driven by a 400 HP, 500 Volt, 1750 RPMMotor thru a Gearbox, Type 2A76/3850, Werner & Pfleiderer70mm Twin Screw Side Feeder, Kinney Vacuum Pump, RelianceDrive Panel with VS Drive, Temperature Panel, 440 KVATransformer, 150 KVA Transformer, Die Head, Design &Fabrication Wire Mesh Strand Belt Cooling Conveyor, 23" Wide x245" Long with (12) Spray Bars, Brush, 17" Wide Air Knife WithBlower, Motorized Incline Adjustment, Bottom Holding Tank,Strand Pelletizer with 16" Wide 40 Fixed Knife Helical Rotor, (2) Metal Pneumatically Adjustable Pull Rolls, Witte VibratoryScreener, Stainless Steel, 36" Wide X 60" Long Screen, DuconType VM Cyclone with Exhaust Blower, K-Tron Model SWB300Weigh Belt Feeder, (7) K-Tron Screw Feeders, PCE Sales &Engineering 6" Diameter x 88" Long Stainless Steel ScrewConveyor Feeder

1 – WERNER & PFLEIDERER 70MM PELLETIZING LINE,Consisting Of: ZSK-70 70mm Co-Rotating Twin Screw Extruder,36 to 1 L/D Ratio, S/N 180802, (1995), (9) Barrel Sections withFeed with Hopper, Top Vented, Electrically Heated Water Cooledwith Closed Loop System with Pump, Tank, and Heat Exchanger;Approximate 42-1/2" Centerline Height, Driven by a 250 HP, 500Volt, 1750/2000 RPM DC Motor thru a Gearbox, Kinney VacuumPump, Reliance Drive Panel, Temperature Control Panel, 150KVA Transformer, 275 KVA Transformer, Computer OperatorPanel, Kreyenborg Hydraulic Screen Changer, with Power Pack,and Control Panel, Die Head (2) 24 Hole Strand Die Lips, GattoStainless Steel Water Bath, 18" Wide x 12" Deep x 168" Long withStrand Guides, Brush and Air Knife, Strand Pelletizer with 16"Wide 40 Fixed Knife Helical Rotor, Rubber, Metal PneumaticallyAdjustable Pull Rolls, Witte Vibratory Pellet Cooler Screener,Stainless Steel, 30" Wide x 36" Long Slotted Screen, Top Cover,3 HP Supply Blower, Cyclone With Exhaust Blower and StainlessSteel Pellet Discharge Bin, (2) K-Tron Weigh Belt Feeders withHoppers, K-Tron Screw Feeder, Conair Screw Feeder

PACKAGING EQUIPMENT

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)4

PACKAGING EQUIPMENT3 – SLIDELL-MATIC MODEL 3120 ELECTRO-MECHANICAL

PNEUMATICALLY CONTROLLED BAGGING LINES,Stainless Steel Bagging Surge Hopper with (2) VibratoryFeeders, Bagging Scale, Bag Filling Spout with Bag Clamp,Bag Feed Magazine, Busch Vacuum Pump, Bag TopClosing Conveyor, Bag Grabber, 12" Wide X 15' LongTakeaway Conveyor, Knockdown Conveyor, OperatorPanel, Control Panel, Fischbein PILS-300 Bag Sealer, ITWInkjet Coder

1 – MODEL 2200 AUTOMATIC BAG PALLETIZER,Designed for Multi-Wall Kraft Paper with self-sealinginternal valve. Filled Bag Size 17" x 28" x 5-1/2", 25kgWeight, Production 15 Bags per Minute Maximum, Cargoand Block Type Pallet Size 50" x 43". Layer Pattern 5Bag Interlocking: Butts-Out, 40 Bags per Pallet, Consistsof Elevator/Flattener Conveyor, Accumulation/PacingConveyor, Mettler-Toledo Checkweigher, Reject Conveyor,Operator Platform, Bottom Slipsheet Dispenser, PalletLoad Conveyor, Top Slipsheet Dispenser, RollerConveyor, Pallet Dispenser, Cousins 6100-45-CTSStretch Wrapper, S/N 110908-6145-7860

1 – MANUAL BAGGING LINE: HOWE RICHARDSONMANUAL BAGGER, Model G17, S/N A011201. Capacity65 kg with Hopper, Bag Holder, Conveyors, Bag FlatnerConveyor, Vacumove Hoist with Pump, Fischbein PILS-300 Bag Sealer

1 – FISCHBEIN MODEL PILS-100 19500-FA340 BAGSEALER, S/N PILS002093096, Allen-Bradley SLC/503CPU Controls and Allen-Bradley Panelview 550

1 – THERMO SCIENTIFIC MODEL DSP3 PIPELINEMETAL DETECTOR, S/N 08436274, 6" DiameterAperture with Controller

2 – SAFELINE MODEL POWERPHASE PIPELINE METALDETECTORS, S/Ns 44592, 44591, 6" Diameter Aperturewith Controller

2 – GORING KERR MODEL 402C-8X5 PIPELINE METALDETECTORS, S/Ns 21562, N/A

AUXILIARY EQUIPMENT: PELLETIZERS-HOPPERS-TANKS-PUMPS

For more information, please visit us on the web at www.hilcoind.com/maitland 5

AUXILIARY EQUIPMENT2 – OCONNER TANKS 12' DIA. X 60' CARBON STEEL SILOS, S/Ns P-1244, N/A (Both 1995), 5700

Cu.Ft., Top Bin Dust Collector, Coned Bottom with Outlet, Skirt Mounted with Access Door 1 – CONAIR MODEL S35160 STRAND PELLETIZER, S/N ACG 4040, 16" Wide 40 Fixed Knife Helical

Rotor, Rubber & Metal Pneumatically Adjustable Pull Rolls, 25 HP, 575 Volt Motor Mounted On Casters 6 – STRAND PELLETIZERS, 16" Wide 40 Fixed Knife Helical Rotor, (2) Metal Pneumatically Adjustable

Pull Rolls, 25 HP 3/60/575 Volt 1775 RPM Motor, Mounted on Casters 1 – ANDERSON MODEL M 1.5-20 FLAT BED HEAF GAS FILTRATION SYSTEM, S/N H-7184-1037,

Sized for an Inlet Gas Flow Rate of 2000 ACFM at 120° F and -2" W.G. Static Pressure, 18" Wide HPFilter with Take Up, and Drive Motor, Mist Separator Housing, and 25 HP, 3545 RPM Blower

1 – SPENCER TURBINE STATIONARY VACUUM SYSTEM, with Multi-Stage Vacuum Producer, Model30206B, S/N 314639, 25 HP, 3515 RPM Motor, Tubular Bag Separator

1 – AZO MODEL FLEXIDOS 75/6/1 5L A21 STAINLESS STEEL DOSING SYSTEM, HI 2151/30WCWaversaver CI IT Weight Controller

1 – POLLUTION CONTROL PRODUCTS CO. MODEL SCTR12 NATURAL GAS CONTROLLEDPYROLYSIS CLEANING FURNACE, S/N 4105, 330,000 BTU, Honeywell Controllers, Control Panel,Transfer Cart

1 – BAYCO MODEL BB-42 NATURAL GAS CLEANING OVEN, S/N C-220, 350,000 BTU, OmronController and Control Panel

1 – PROCOR 46,000 GALLONS 212BFQ CARBON STEEL HORIZONTAL NITROGEN TANK, S/N 62.64,Code #UW12B, C.R.N #C5150.5, Approximate 120" Dia. x 864" Straight Side, Hemispherical Heads,Internal Rated 150 psi at 68° F, Shell 0.610 Thick, Heads 0.505 Thick, Tested 1963

1 – SIHI MODEL LPHR60520AB0410BS LIQUID RING VACUUM PUMP, S/N CA1470786-01 (2002),Carbon Steel, Rated 365 CFM at 25.95" HG, Vacuum 4" HG. w/ 25 HP, 3/60/575 Volt, 1770 RPM Motor

5 – BUSCH MODEL RC0250 VACUUM PUMPS, S/Ns D14183, 84, 85, 86, 88, Carbon Steel, Rated 180CFM at 29.3" HG, 10 HP, 3/60/575 Volt, 1755 RPM

2 – BUSCH MODEL RA0255 VACUUM PUMPS, S/Ns U0345413, U071101843, Carbon Steel, Rated 180CFM, 10 HP, 1760 RPM

2 – 500 CU.FT. STAINLESS STEEL HOPPERS, 76" Diameter x 192" Straight Side, Flat Top, ConedBottom, Side Top Access Door, 6" Center Bottom Outlet, Mounts on Side Lugs

2 – 500 CU.FT. CARBON STEEL HOPPERS, 24" x 24" Flanged Discharge, Front Staging Hopper

2 – 295 CU.FT. STAINLESS STEEL HOPPERS, 80" x 60" X 192" Straight Side, Flat Top,Coned Bottom, Side Access Door, 6" Center Bottom Outlet, Mounted on Legs

2 – BUHLER-MIAG 200 CU.FT. STAINLESS STEEL HOPPERS, 72" Diameter x 90"Straight Side, Flat Top, Coned Bottom, Side Top Access Door, 6" Center BottomOutlet, Mounted on Legs

2 – BUHLER-MIAG 195 CU.FT. STAINLESS STEEL HOPPERS, S/Ns X87082, 83, 72" Diameter x 84" Straight Side. Vibra Screw Bin Discharger, Driven by a 2 HP, 1750RPM Motor, Mounted on 4 Carbon Steel Legs

1 – EXTRUDER SEGMENT STRIPPER TABLE, with Pulling Accessories 3 – DOMINO MODEL A300+ INK JET PRINTERS, S/Ns W3A04257, W3A04248,

W3A04248, Stainless Steel Cabinet QUANTITY OF AUXILIARY EQUIPMENT, Including: Scales, Jib Cranes & Hoist, SelfDumping Hoppers, Ladders, Shop Fans, Banding Carts & Electric Motors

BLENDERS • DUST COLLECTORS

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)6

BLENDERS2 – PEACOCK CONTINUOUS VIBRA-BLENDER BLENDERS, S/Ns 87-59060-

02, N/A, 1200 Cu.Ft. an Hour Throughput Capacity Depending on Product, 20"Diameter x 74" Long x 6" Centers Screw, 2 HP Motor, Trough 21" Wide x 20-1/2" Deep x 96" Long, Clamp Down Top Covers, Top End Feed, 20" Dia.End Bottom Discharge, 1.5 HP Gyrator Motor, Carbon Steel Frame

2 – A&M MODEL RB350V 35 CU.FT. STAINLESS STEEL DOUBLE SPIRALRIBBON BLENDERS, S/Ns 89681, 89682 (1996), 304 Stainless Steel, Non-Jacketed Trough 32" Wide x 78" Long x 38" Deep, 3" Diameter Shaft.Inner Ribbon 2" Wide, Outer Ribbon 1" Wide Welded to 1" Diameter Posts,Vacuum Top Cover Rated up to 20" HG Vacuum Pressure at 1"/HG MinimumLeak Rate, Outboard Roller Bearings, Packing Glands, 6" End Bottom Outlet,10 HP, 1745-52 RPM Gear Motor Ratio 33.37 to 1, Mounted on Side Lugs

1 – PATTERSON INDUSTRIES 25 CU.FT. STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER, S/N CA6560, 304 Stainless Steel, Non-Jacketed Trough 23-1/2" Wide x 96" Long x 22" Deep, 2-1/2" Diameter Shaft,Inner Ribbon 1" Wide, Outer Ribbon 3/4" Wide Welded to 1" Diameter Posts,Top Cover, Outboard Roller Bearings, Packing Glands, 6" Center BottomOutlet, 10 HP Gear Motor, Mounted on Carbon Steel Legs

1 – PAUL O. ABBE MODEL 7RM 19 CU.FT. STAINLESS STEEL DOUBLESPIRAL RIBBON BLENDER, S/N A33383, 304 Stainless Steel, Non-Jacketed Trough 22" Wide x 76" Long x 25" Deep, 3" Diameter Shaft, InnerRibbon 1" Wide, Outer Ribbon 1-1/2" Wide Welded to 1" Diameter Posts,Top Cover, Outboard Roller Bearings, Packing Glands, 3" End BottomOutlet, 5 HP, 1725 RPM Gear Motor, Ratio 25 To 1. Mounted on CarbonSteel Legs

1 – A&M MODEL ACB50 5 CU.FT. CONICAL BLENDER, S/N 69865,(Unused), 304 Stainless Steel, Shell 31" Diameter x 14" Straight Side x 14"and 17" Cones, 11" Diameter Top Charge Port with Cover, 6" Center BottomOutlet with a Manual Iris Valve, 1 HP, 30 RPM Gear Motor, Ratio 56.49 to 1,Mounted on Stainless Steel Stands

1 – AZO MODEL MIXOMAT 100N A2 STAINLESS STEEL BLENDER2 – 1230 CU.FT. STAINLESS STEEL BLENDING SILOS 120” Diameter x 184”

Straight Side x 84” Coned Bottom, Slight Dished Top, Mounted on 4 CarbonSteel Legs

DUST COLLECTORS1 – FLEX KLEEN MODEL 84-WMWC-600 (III) PULSE JET DUST COLLECTOR, S/N 05237

(1999), Carbon Steel, 6360 Square Feet Filter Area, 25,961 CFM, (600) 6" Diameter x 84"Long Cages, Top Access Doors, (2) Bottom Product Outlets With Housings, New YorkBlower AF Forty Fan, Size 44, 150 HP, 1785 RPM Motor

1 – FARR MODEL 6-81-10TR RAMTUBE PULSE JET DUST COLLECTOR, S/N 91487(2000), Carbon Steel, 1239 Square Feet Filter Area, 5,000 CFM, Approximate (81) Cages,Top Access Doors, Bottom Product Outlet with Rotary Valve, IAP 25 HP Blower, Model 13-120PCL50ARR1W, S/N 990723-2, 1770 RPM

1 – FARR MODEL MARK III TENKAY PULSE JET DUST COLLECTOR, Carbon Steel, 900Square Feet Filter Area, Top Access Doors, Bottom Product Outlet with Housing, SheldonsEngineering Blower, Type 300 ULF. CENT. FAN CL.3, 40 HP,1765 RPM Motor

1 – FARR RAMTUBE JET PULSE DUST COLLECTOR, Carbon Steel, 900 Square FeetFilter Area, Top Access Doors, Bottom Product Outlet With Housing, Alphair Blower

1 – FARR MODEL 6-49-10TR RAMTUBE PULSE JET DUST COLLECTOR, S/N 91487, CarbonSteel, 754 Square Feet Filter Area, 2,737 CFM, (49) Cages, Top Access Doors, BottomProduct Outlet, IAP 15 HP Blower, Model 11-PCL20ARR1W, S/N 990723-1,1765 RPM

1 – MACROTEK MODEL MWM100-49 PULSE JET DUST COLLECTOR, S/N 600064-001,Carbon Steel, 500 Square Feet Filter Area, Top Access Doors, Bottom Product Outlet withHousing, S/N 45097, Howden 7.5 HP Blower, Model ACL BI, Size 300,1755 RPM

1 – DUCON MODEL 21-6-30-CYL TYPE C PULSE JET DUST COLLECTOR, Carbon Steel,148 Square Feet Filter Area, 700-2500 CFM, Top Access Doors, Bottom Product Outlet,with Rotary Valve, S/N CP87-09-2203. Canadian Blower, Type MW, Size 21, S/N87J2355T5T101, 5 HP, 3500 RPM Motor

INJECTION MOLDING • LAB EQUIPMENT • MATERIAL HANDLING

For more information, please visit us on the web at www.hilcoind.com/maitland 7

MATERIAL HANDLING2 – ROOTS VACUUM CONVEYOR SYSTEMS, Roots Universal RAI

Horizontal Rotary Positive Displacement Blower, Model 45 U-RAI, 134Cfm At 1760 RPM At 12'' HGV, 10 HP, 1748 RPM Motor, Filter w/Silencer, Base Mounted

1 – ROOTS VACUUM CONVEYOR SYSTEM, Roots Whispair MaxHorizontal Rotary Positive Displacement Blower, Model 3505J, 134 cfmat 1760 RPM at 12'' HGV, 10 HP, 1748 RPM Motor, S/N 92-61696, Filterw/ Silencer, Base Mounted

1 – LAMSON CAT # 517-7-0-AD MULTISTAGE CENTRIFUGAL BLOWER,S/N 901828, Carbon Steel, 200 cfm at 12" Vacuum HG, 40 hpHP, 3550RPM Motor, Filter w/ Silencer, Mounted on Frame

4 – AERZEN TYPE GMA 12.5 ROTARY PISTON BLOWERS, Rated 466Cu.Ft., 15 HP 1755 RPM Motor, w/ Silencer, Filter & Sound Enclosure,575 Volt

2 – AERZEN TYPE GMA 13.8 ROTARY PISTON BLOWERS, Carbon Steel,Rated 1055 Cu.Ft., 25 HP, 1765 RPM Motor, w/ Silencer, Filter & SoundEnclosure

3 – TUBAR MODEL TC GAYLORD/BOX DUMPERS, S/N 8766, 8767,8768, 52" x 48" Platform, Discharge Chute w/ 6' Pneumatic ButterflyValve, Mounted on a 75" x 64" x 72" High Stand

3 – 65 CU. FT. STAINLESS STEEL RESIN HOPPERS, 28" Dia. FlangedEntry, 16" x 16" Flanged Exit, 20" x 20" Access Door, Mounted On Legs,114" High

1 – AZO MODEL D800X 1550H KPL STAINLESS STEEL LOADER,HI2151/30WC Waver Saver Weight Controller

1 – CONTROL & METERING MODEL F60-F BULK BAG DISCHARGINGSYSTEM, S/N C4559 (2010)

1 – STAINLESS STEEL SUPER SACK UNLOADER, w/ High PressureConveying System

QUANTITY OF MATERIAL HANDLING EQUIPMENT, Including: ConairDust Collectors, Handling Specialty & Southworth 2000 Lb. Hydraulic TiltTables, Cleveland Vibrator Co. Pneumatic Shaker Tables, Stainless SteelHoppers, Etc.

INJECTION MOLDING MACHINE1 – ENGEL MODEL ES80 82 TON HORIZONTAL INJECTION MOLDING MACHINE, S/N 1950/080,

Clamp Stroke: 11.81", Daylight: 17.71" X 26.77", Ejector Stroke: 3.14", Ejector Force: 2.30", MoldHeight 5.90" to 14.96", ISI Controls (Upgraded 2009), & (2) Spaltemp Temperature Controllers

LABORATORY EQUIPMENT1 – FISHER SCIENTIFIC MODEL ISOTEMP 110 10 LITER WATER BATH, 120 Volt 1 – TA INSTRUMENTS MODEL DSC 2010 DIFFERENTIAL SCANNING CALORIMETER1 – VELP SCIENTIFICA MODEL DK 6 HEATING DIGESTER HEAT EXCHANGER1 – COSTECH MODEL ECS 4010 N1 DETERMINATOR, S/N 2101210359 (2011), 230 Volt 50 Hz 1 – ALNOR MODEL COMPUFLOW 8565 THERMO ANEMOMETER, CompuFlow 8520 Micro Printer 1 – NEY MODEL VULCAN A-550 ELECTRIC BURNOUT FURNACE, S/N AKV 9502-102, 2000° 1 – ASOMA INSTRUMENTS CORP. MODEL 200T X-RAY FLUORESCENT SPECTROMETER, S/N 84931 – INSTRON STATIC LOAD CELL1 – WS TYLER MODEL RX-24 PORTABLE SIEVE SHAKER, 110 Volt 1 – BURRELL MODEL WRIST-ACTION PORTABLE SHAKER, 110 Volt 1 – HUNTERLAB MODEL COLORFLEX 45/0 SPECTROPHOTOMETER, S/N CX2370, w/ Standards 1 – CE INSTRUMENTS MODEL NA2100 PROTEIN ANALYZER1 – DAVENPORT 4-STATION THERMOPLASTIC TESTER

HILCO Industrial is a division of Hilco Global • Headquarters 5 revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • DUP2670 • IL  License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleAn 18% buyer's premium will be charged on all assets.everything will be sold to the highest bidder for cash, inaccordance with the Auctioneer’s customary “Terms ofSale”, copies of which will be posted on the premises of thesale and subject to additional terms announced the day ofsale. All items will be sold “as is, where-is” without any war-ranties, expressed or implied. Although obtained fromsources deemed reliable, the Auctioneer makes no warrantyor guarantee to the accuracy of the information herein con-tained. Bidders are encouraged to thoroughly inspect theitems on which they intend to bid prior to sale. Absolutelyno items will be removed until the day after the conclusionof the sale and payment is made in full. Subject to addi-tions, deletions and prior sale. For updated information,please visit our website at www.hilcoind.com for anychanges to date, sale process, terms and conditions andlist of available assets.

Payment: inVoiceS Will Be eMAiled WiTHin 24 HoURSAFTeR THe AUcTion cloSeS. Payment is to be made toHilco industrial, llc. Payment options: ViSA, Mastercarddiscover accepted – if invoice total is $2,000 or less; WireTransfer; certified check; or company check (with Bankletter of guarantee – see sample letter below). All sales aresubject to sales tax. Purchasers claiming exemptions fromtaxes must provide proof satisfactory to the Auctioneer oftheir entitlement to claim such exemptions. Please seecomplete terms and conditions on our website,www.hilcoind.com.

Sample Bank Letter

(Bank name) unconditionally guarantees payment to Hilco industrial from (company name). This guarantee will be valid for purchases made at theAuction of A Major Plastics compounding Facility onThursday, July 23, 2015.

FollowUs on:

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Sale Date: Thursday, July 23rd • 10:00 am Local TimeMaitland, ON, Canada

FeaturingCompounding/Pelletizing Lines, Blending & Packaging Lines