Date post: | 16-Nov-2014 |
Category: |
Documents |
Upload: | radio-parts |
View: | 3,425 times |
Download: | 25 times |
2007 Catalogue
Contents
1 Free To Air Antennas 5
2 Mounts & Hardware 27
3 Amplifiers 37
4 Passives 67
5 Coaxial Cable 73
6 Connectors & Adaptors 79
7 Tools & Kits 85
8 Satellite Equipment 89
9 Field Strength Meters 97
10 Blister Accessories 103
11 CableReady Ducting 111
12 Hills Home Hub 115
13 Technical Information 119
1 Free To Air Antennas
Optimax Antenna .................................................. 6OMX100 Series .......................................................... 6OMX150 PLUS Series ................................................ 6OMX200 Series .......................................................... 7OMX250 Series .......................................................... 7OMX300 Series .......................................................... 8OMX350 Series .......................................................... 8OMX400 Series .......................................................... 9OMX450 PLUS Series ................................................ 9OMX550 PLUS Series ................................................ 10OMX650 PLUS Series ................................................ 10
Combination Antenna ......................................... 11Spectramax UHF / VHF ............................................ 11Seeker Cross Polarised .............................................. 12
UHF Antenna ...................................................... 13TruColour XTRA UHF ................................................ 13TruMatch XTRA Engineered For Digital UHF ............ 14Optional Supports for TMX and TCX ......................... 16UHF Phased Array ..................................................... 17Super Fringe XTRA UHF ............................................ 18
VHF Antenna ...................................................... 19VHF Regional ............................................................. 19DigiTel Engineered For Digital VHF Wideband ........... 20DigiTel Engineered For Digital Y Series VHF ............. 21EFC™ VHF Wideband................................................ 22VHF Phased Array ..................................................... 22
Caravan Antenna ................................................ 23Vantenna .................................................................... 23Nifti Nomad ................................................................ 23
Marine Antenna .................................................. 24Omninova Marine ....................................................... 24
Indoor Antenna ................................................... 25VHF / UHF 75 OHM ................................................... 25
Page 6 Product Catalogue 2007
Optimax AntennaOMX100 Series
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
OMX100 2 - 12 28 - 40 4 - 9 9 - 10 10 - 14 11.5 - 15 2.3 : 1 1.9 : 1
OMX100 ECONOMY 2 - 12 28 - 40 4 - 9 9 - 10 10 - 14 10.5 - 13.5 2 : 1 1.6 : 1
OMX100 PLUS 2 - 12 28 - 40 4 - 9 9 - 11 10 - 14 11.5 - 15 2 : 1 1.6 : 1
OMX150 PLUS 2 - 12 28 - 40 4 - 9 9 - 11 10 - 14 16 - 18 2 : 1 1.6 : 1
Mechanical
Refl ector Boom Balun Connection Packaging
OMX100 Trigonal 15 by 15 Powder Coated Aluminium Ferrite Screw & Saddle Fan Fold Carton
OMX100 ECONOMY Single Element 30 by 15 Galvanised Steel Ferrite F Type Polysleeve Bag
OMX100 PLUS Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
OMX150 PLUS Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
OMX100 FB608522Designed with aScrew & Saddleconnection, Ferrite balunand Trigonal refl ector.
OMX100 ECONOMY
FB608523Designed with a F Typeconnection, Ferritebalun and singleelement refl ector.
OMX100 PLUSFB608521Designed with a F Type connection, PCB balun and Trigonal refl ector.An antenna that features the latest available technology to provide Optimum performance and maximum strength.
Features
• Galvanised steel boom for a more rigid antenna.• Extruded aluminium construction for OMX100.• Clam shell insulators and a fl at sided boom provide a more consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • Solid rivet construction for durability. • F Type connectors enable better shielding and more reliable connections.
Optimax AntennaOMX150 PLUS Series
OMX150 PLUS FB608547Designed with a F Typeconnection, PCBbalun and Trigonal refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
Added features includes:
• Extra UHF elements for improved UHF performance.• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Free To Air Antennas 1
Product Catalogue 2007 Page 7
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
OMX200NEW 3 & 5A 28 - 57 4 - 5 11 - 13 10 - 12 17 - 20 2 : 1 1.6 : 1
OMX200SW 3 & 5 30 - 40 4 - 5 12 - 13 10 - 12 15 - 17 2 : 1 1.6 : 1
OMX250WA 3 - 5 28 - 50 4 - 6 10 - 14 10 - 13 14 - 21 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
OMX200NEW Trigonal 30 by 15 Powder Coated
Galvanised Steel PCB F Type Polysleeve Bag
OMX200SW Trigonal 30 by 15 Powder Coated
Galvanised Steel Ferrite F Type Fan Fold Carton
OMX250WA Trigonal 15 by 15 Powder Coated Aluminium PCB F Type Fan Fold Carton
Optimax AntennaOMX200 Series
OMX200NEW FB608525Designed with F Type connection, PCB balun and Trigonal Refl ector. Ideal for reception in Newcastle.
OMX200SW
FB608526Designed with a F Type connection, Ferrite balun and Trigonal Refl ector. Ideal for reception in Southern Western Australia.
Features
• Galvanised steel boom for maximum strength on OMX200NEW, OMX200SW. • Extruded aluminium construction for OMX250WA. • Solid rivet construction for durability. • Clam shell insulators and a fl at sided boom provide a more consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • F Type connectors enable better shielding and more reliable connections.
Optimax AntennaOMX250 Series
OMX250WA
FB608553ADesigned with a F Type connection, Ferrite balun and Trigonal Refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
Added features includes:
• Extra UHF elements for improved UHF performance• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Free To Air Antennas 1
Page 8 Product Catalogue 2007
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
OMX300WB 1 - 12 28 - 69 3 - 9 8 - 14 10 - 15 12 - 16 2 : 1 1.6 : 1
OMX300B4+ 1 - 12 28 - 50 3 - 9 9 - 13 10 - 15 15 - 19 2 : 1 1.6 : 1
OMX350WB 1 - 12 28 - 69 3 - 9 8 - 15 10 - 15 13 - 17 2 : 1 1.6 : 1
OMX350B4+ 1 - 12 28 - 50 3 - 9 9 - 14 10 - 15 15 - 20 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
OMX300WB Trigonal 30 by 15 Powder Coated
Galvanised Steel PCB F Type Fan Fold Carton
OMX300B4+ Trigonal 30 by 15 Powder Coated
Galvanised Steel PCB F Type Fan Fold Carton
OMX350WB Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
OMX350B4+ Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
Optimax AntennaOMX300 Series
OMX300WB
FB608524Designed with a F Typeconnection, PCB balunand Trigonal refl ector.
OMX300B4+
FB608517Designed with a F Typeconnection, PCB balunand Trigonal refl ector.
Features
• Galvanised steel boom for a more rigid antenna. • Clam shell insulators and a fl at sided boom provide a more connection, PCB balun consistent element alignment. and Trigonal refl ector. • 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • Solid rivet construction for durability. • F Type connectors enable better shielding and more reliable connections.
Optimax AntennaOMX350 Series
OMX350WB
FB608549Designed with a F Typeconnection, PCB balunand Trigonal refl ector
OMX350B4+
FB608548Designed with a F Typeconnection, PCB balunand Trigonal refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
Added features includes:
• Extra UHF elements for improved UHF performance.• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Free To Air Antennas 1
Product Catalogue 2007 Page 9
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
OMX400 2 - 12 28 - 40 5 - 10 10 - 13 10 - 14 11.5 - 15 2.3 : 1 1.9 : 1
OMX400 PLUS 2 - 12 28 - 40 5 - 10 10 - 13 10 - 14 11.5 - 15 2 : 1 1.6 : 1
OMX450 PLUS 2 - 12 28 - 40 5 - 10 11 - 13 10 - 14 13 - 17 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
OMX400 Trigonal30 by 15 Powder Coated
Galvanised SteelFerrite F Type Fan Fold Carton
OMX400 PLUS Trigonal 30 by 15 Powder Coated
Galvanised Steel PCB F Type Fan Fold Carton
OMX450 PLUS Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
Optimax AntennaOMX400 Series
OMX400
FB608520Designed with a Screw & Saddle connection, Ferrite balun and Trigonalrefl ector.
OMX400 PLUS FB608519Designed with a F Type connection, PCB balun and Trigonal refl ector.An antenna that features the latest available technology to provide Optimum performance and maximum strength.
Features
• Strong Galvanised steel boom for a more rigid antenna. • Clam shell insulators and a fl at sided boom provide a more consistent element alignment. • 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • Solid rivet construction for durability. • F Type connectors enable better shielding and more reliable connections.
Optimax AntennaOMX450 PLUS Series
OMX450 PLUS
FB608550Designed with a F Type connection, PCB balun and Trigonal refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
Added features includes:
• Extra UHF elements for improved UHF performance• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Free To Air Antennas 1
Page 10 Product Catalogue 2007
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
OMX550 PLUS 2 - 12 28 -40 6 - 11 12 - 14 10 - 15 16 - 19 2 : 1 1.6 : 1
OMX650 PLUS 2 - 12 28 - 40 6 - 11 13 -15 10 - 15 16 - 19 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
OMX550 PLUS Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
OMX650 PLUS Trigonal30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
Optimax AntennaOMX550 PLUS Series
OMX550 PLUS
FB608551Designed with a F Type connection, PCB balun and Trigonal refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
• Galvanised steel boom for a more rigid antenna. • Clam shell insulators and a fl at sided boom provide consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • Solid rivet construction for durability. • F Type connectors enable better shielding and more reliable connection.• Extra UHF elements for improved UHF performance.• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Optimax AntennaOMX650 PLUS Series
OMX650 PLUS
FB608552Designed with a F Type connection, PCB balun and Trigonal refl ector.
Features
The Optimax 50 Series range has been released to celebrate 50 years of Australian antenna manufacturing.
• Galvanised steel boom for a more rigid antenna. • Clam shell insulators and a fl at sided boom provide consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • Solid rivet construction for durability. • F Type connectors enable better shielding and more reliable connection.• Extra UHF elements for improved UHF performance• Ultrasonically sealed balun housing to prevent water ingress.• Improved position of F connector on balun housing for easy access.• Improved trigonal refl ector with easy clip on design, requiring no tools or fasteners.• Easy to install.
Free To Air Antennas 1
Product Catalogue 2007 Page 11
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
SMX14WB 6 - 12 28 - 69 5 - 7 8 - 12 12 - 15 12 - 16 2 : 1 1.6 : 1
SMX14B4+ 6 - 12 28 - 50 5 - 7 9 - 14 12 - 15 12 - 15 2 : 1 1.6 : 1
SMX24WB 6 - 12 28 - 69 6 - 8 9 - 13 13 - 16 13 - 17 2 : 1 1.6 : 1
SMX24B4+ 6 - 12 28 - 50 6 - 8 10 - 16 13 - 16 15 - 19 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
SMX14WB Trigonal15 by 15 Powder Coated
AluminiumFerrite F Type Polysleeve Bag
SMX14B4+ Trigonal15 by 15 Powder Coated
AluminiumFerrite F Type Polysleeve Bag
SMX24WB Trigonal30 by 15 Powder Coated
Galvanised SteelFerrite F Type Fan Fold Carton
SMX24B4+ Trigonal30 by 15 Powder Coated
Galvanised SteelFerrite F Type Fan Fold Carton
Features
• Galvanised steel boom construction for maximum strength on longer SMX24.• Extruded aluminium boom construction for SMX14.• Solid rivet construction for durability. • Clam shell insulators and a fl at sided boom provide a more consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • F Type connectors enable better shielding and more reliable connection.
Combination Antenna (Bands 3,4,5)Spectramax UHF / VHF Spectramax antennas specifi cally designed to maximise reception of digital transmission signals in VHF band 3 and UHF band 4 as transmitted in most Capital Cities.
Compact design allowing a short mast when mounted in the vertical polarisation
SMX14WBFB608531
SMX14B4+FB608530
Double sided UHF elements & Trigonal refl ector to improve performance.
SMX24WBFB608533
SMX24B4+FB608532
Free To Air Antennas 1
Page 12 Product Catalogue 2007
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF UHF VHF UHF VHF UHF VHF UHF
UV13B4+ 28-52 6 - 12 28 - 52 6 - 7.5 11 - 14 10 - 14 12 - 17 2 : 1 1.6 : 1
UV13B5 38-69 6 - 12 38 - 69 6 - 7.5 12 - 15 10 - 14 12 - 15 2 : 1 1.6 : 1
UV19WB 0 - 3, 6 - 12 28 - 69 4 - 9 6 - 12 10 - 14 9 - 11 2 : 1 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
UV13B4+ 28-52 Straight Element15 by 15 Powder Coated
Aluminium Ferrite F Type Fan Fold Carton
UV13B5 38-69 Straight Element15 by 15 Powder Coated
AluminiumFerrite F Type Fan Fold Carton
UV19WB Straight Element 15 by 15 Aluminium Ferrite F Type Fan Fold Carton
Features
• Aluminium boom with unique dual rear section for extra strength.• Solid rivet construction for durability. • Clam shell insulators and a fl at sided boom provide a more consistent element alignment.• 1/2 inch extruded aluminium elements provide a heavy duty construction to withstand harsh weather conditions and wildlife. • F Type connectors enable better shielding and more reliable connection.
Combination AntennaSeeker Cross PolarisedFor regions where UHF and VHF channels are in alternate polarities. Seeker UV13 is designed for use where VHF is verticall and UHF is horizontall polarised.
Small compact cross polarised antenna design allowing mounting in either polarisation
UV13B4+ 28-52FB608518
UV13B5 38-69FB608534
Cross polarised antenna designed with dual rear aluminium square boom to provide extra strength. A folded dipole with PCB balun in weatherproof housing for superior electrical performance.
UV19WBFB608544
Free To Air Antennas 1
Product Catalogue 2007 Page 13
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
UHF UHF UHF UHF
TCX16WB 28 - 69 8 - 13 17 - 20 1.6 : 1
TCX20B4+ 28 - 50 8.5 - 15 15 - 24 1.6 : 1
TCX34WB 28 - 69 10 - 17 15 - 22 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
TCX16WB Trigonal15 by 15 Powder Coated
Aluminium Ferrite Screw & Saddle Fan Fold Carton
TCX20B4+ Trigonal15 by 15 Powder Coated
Aluminium Ferrite Screw & Saddle Fan Fold Carton
TCX34WB Trigonal15 by 15 Powder Coated
Aluminium Ferrite Screw & Saddle Fan Fold Carton
UHF AntennaTruColour XTRA UHF The Hills Trucolour range of UHF Antenna was established in the Australian Market Place for the fi rst Australian UHF Transmission.
Designed to the highest electrical standards, the units are easy to install, light weight, compact and mechanically strong.
TCX16WBFB603908BUHF channels, 28-69. Inner Fringe Signal Antenna9 ElementsForward gain 8-13dBFront to back ratio 17-20dB
TCX20B4+
FB603886BForward gain 8.5-15dB7 ElementsFront to back ratio 15-25dB
TCX34WB
FB603878B UHF channels, 28-69Fringe Signal Antenna18 ElementsForward gain 10-17dBFront to back ratio 15-22dB
Features
• Unique Trucolour Dipole.• Achieves excellent matching to 75ohms coaxial cable without the need for a transformer.• Cross shaped double elements give higher gain in a more compact antenna.
Free To Air Antennas 1
Page 14 Product Catalogue 2007
UHF AntennaTruMatch XTRA Engineered For Digital UHF Hills Antenna TV Systems Division have developed a new and exciting range of UHF antenna to meet the needs of digital and analogue television reception. The introduction of digital television has allowed the opportunity to further improve our antennas by utilising the latest available technology. As in all our Engineered For Digital Antennas our TMX range features F Type connections.
TMX12B4
FB607077BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX14B4+
FB607078BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX16WB
FB607079BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX18B4
FB607080B Double sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX18B5
FB607081BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX20B4+
FB607082BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
TMX34WB
FB607083BDouble sided UHF elements & trigonal refl ector, folded dipole and matched PCB balun to improve UHF performance.
Free To Air Antennas 1
Product Catalogue 2007 Page 15
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
UHF UHF UHF UHF
TMX12B4 28 - 37 11 - 13 14 - 16 1.5 : 1
TMX14B4+ 28 - 52 8 - 13 17 - 25 1.6 : 1
TMX16WB 28 - 69 8 - 13 17 - 21 1.6 : 1
TMX18B4 28 - 38 12.5 - 15 12 - 16 1.5 : 1
TMX18B5 38 - 69 10 - 14 18 - 23 1.6 : 1
TMX20B4+ 28 - 52 10 - 14 15 - 24 1.6 : 1
TMX34WB 28 - 69 11 - 16 15 - 25 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
TMX12B4 Trigonal15 by 15 Powder Coated
Aluminium PCB F Type Fan Fold Carton
TMX14B4+ Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
TMX16WB Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
TMX18B4 Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
TMX18B5 Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
TMX20B4+ Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
TMX34WB Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Fan Fold Carton
UHF AntennaTruMatch XTRA Engineered For Digital UHF Features
• Digital and analogue compatibility.• Printed Circuit Board baluns to provide optimal impedance matching and mechanical characteristics.• F Type connectors for better shielding and more reliable connections.• Unique cross shaped double elements for extra strength.• UV stable plastics for durability under harsh Australian conditions.• Simple Assembly.• Australian designed and manufactured.• Compact neat and unobtrusive design.• Cross shaped double elements give higher gain in a more compact antenna.
Free To Air Antennas 1
Page 16 Product Catalogue 2007
UHF AntennaOptional Supports for TMX and TCXFor added stability it is ideal for TMX18, TMX20 and TMX34 or the equivalent TCX antenna to be fi tted with the Optional Centre Support Brace, or the Cantilever Support Brace. Where appropriate the TMX12, TMX14 and TMX16 and the TCXequivalent can be fi tted with the Optional Cantilever Brace.
Centre Support Brace
FB603836
Cantilever Support Brace
FB603844
Free To Air Antennas 1
Product Catalogue 2007 Page 17
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
UHF UHF UHF UHF
Ultimax 36 21 - 69 11.8 - 15.8 16.7 - 21.2 1.6 : 1
Hunter 21 - 69 11.4 - 14.4 17 - 19 1.6 : 1
Mini Hunter CKD 28 - 69 7.6 - 11.1 11 - 20 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
Ultimax 36 Planar15 by 15 Powder Coated
Aluminium PCB F Type Fan Fold Carton
Hunter Planar15 by 15 Powder Coated
AluminiumPCB Screw & Saddle Fan Fold Carton
Mini Hunter CKD Planar15 by 15 Powder Coated
AluminiumPCB Screw & Saddle Fan Fold Carton
UHF AntennaUHF Phased Array Designed with high performance and ease of installation for digital and analogue UHF application. This range of antenna ultises a superior matched PCB balun for effi cent signal transfer with improved matching over a wider frequency range.
An F type ultrasonically sealed balun housing is incorporated on UMX36.
High quality extruded aluminium backscreen with director element for superior performance on UMX36.
Powder coated zinc steel backscreen on Hunter models.
Ultimax 36
FB608542Digital & Analogue compatible, Optimised Wide Band PCB Balun, Sealed Housing with Integral F Type Connector, Robust Construction.
Features
• Broadband – Band 4 & 5 (Channels 28 to 69). Covers any UHF Channel Grouping – Existing and proposed.• High gain – Out performs most WB Yagi types in poor reception areas.• Suitable front to back ratio.• Tilt facility in horizontal mode.• Compact rugged mechanical construction.• Suitable for horizontal vertical polarisation.
Hunter (MK2)
FB603798AComplete with printed circuit balun for optimum performance and matching.
Mini Hunter CKD
FB606092Suitable for horizontal and vertical polarisation.tuned dipoles in a phased array to optimise reception over broadband UHF. PCB balun with saddle and clamp for optimium performance and matching.
Free To Air Antennas 1
Page 18 Product Catalogue 2007
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
UHF UHF UHF UHF
SFX43WB 21 - 69 10.4 - 15.6 18 - 24 1.6 : 1
SFX91WB 21 - 69 13 - 18 19 - 22 1.6 : 1
SFX91B4+ 21 - 50 13 - 18 19 - 22 1.6 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
SFX43WB Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Polysleeve Bag
SFX91WB Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Polysleeve Bag
SF91B4 PLUS Trigonal15 by 15 Powder Coated
AluminiumPCB F Type Polysleeve Bag
SFX43WB
FB608555UHF channels 21-69 UHF gain 10.4-15.6dBUHF F/B ratio 18-24dB
Features
• High quality extruded aluminium backscreen for maximum strength and optimum corrosion protection.• The ‘X’ design produces more gain than conventional elements.• Lightweight but robust construction.• F Type balun.• Ultrasonically sealed balun housing.• SFX 91 are provided with support brace for higher stability mounting.
SFX91WB
FB608556UHF channels 21-69 UHF gain 13-18dBUHF F/B ratio 19-26dB
SFX91B4+
FB608557UHF channels 21-50 UHF gain 13-18dBUHF F/B ratio 18-25dB
UHF AntennaSuper Fringe XTRA UHFA range of high gain UHF antennas for use in moderate to poor reception or ghosting areas. Designed and manufactured in Australia.
Free To Air Antennas 1
Product Catalogue 2007 Page 19
VHF AntennaVHF Regional
203/345A
FB608015VHF channels, 3-5 & 5A 5 ElementsFringe Signal AntennaForward gain 5dBFront to back ratio 18dB
15A34
FB608022VHF channels, 3-4 & 5A 4 ElementsPrime Signal AntennaForward gain 5dBFront to back ratio 12dB
218
FB608021VHF channels, 1, 2 & 6-8 6 ElementsPrime Signal AntennaForward gain 4-8.5dBFront to back ratio 8-17dB
Y3/FM (With Balun)
FB608010VHF channels FM, 3, 4 & 5 3 ElementsPrime Signal AntennaForward gain 5dBFront to back ratio 15dB
103/02
FB608018VHF channels, 0-2 4 ElementsPrime Signal AntennaForward gain 2.5-4dBFront to back ratio 12.5-19dB
GM5
FB608012VHF channels, 1-2, 6-10 4 ElementsPrime Signal AntennaForward gain 3-6dBFront to back ratio 9dB
2E 0-3
FB608016VHF channels, 0-3 2 ElementsPrime Signal AntennaForward gain 3dBFront to back ratio 8dB
113/114E
FB608017VHF channels, 1-4 4 ElementsPrime Signal AntennaForward gain 5dBFront to back ratio 10-15dB
106/45A-12
FB608014VHF channels, 5A, 6-127 Elements, Prime Signal AntennaForward gain 4-7Front to back ratio 10-15dB
Free To Air Antennas 1
Page 20 Product Catalogue 2007
Features
• Suitable for digital and analogue reception• Printed circuit board baluns to provide optimal impedance matching across the frequency range and superior mechanical characteristics means maximum signal transfer.• F Type connections for better shielding and more reliable connections.• Heavy duty construction for extra strength.• Rectangular galvanised steel boom construction provides excellent element alignment.• Powder coated boom for longer life and improved aesthetics.• UV stable plastics for durability under harsh Australian weather conditions.• Australian design and manufacture.• Continuous coverage throughout the FM band.
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF VHF VHF VHF
DL1 1 - 12 3 - 6 10 - 12 2 : 1
DL2 1 - 12 3.5 - 8 11 - 13 2 : 1
DL3 1 - 12 4 - 10 11 - 16 2 : 1
DL4 1 - 12 5 - 11 14 - 17 2 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
DL1 Straight Element30 by 15 Powder Coated
Galvanised Steel PCB F Type Fan Fold Carton
DL2 Straight Element30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
DL3 Straight Element30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
DL4 Straight Element30 by 15 Powder Coated
Galvanised SteelPCB F Type Fan Fold Carton
VHF AntennaDigiTel Engineered For Digital VHF Wideband
DL1
FB6080026 ElementsPrime Signal Antenna
DL2
FB6080038 ElementsOuter Prime Signal Antenna
DL3
FB6080049 ElementsInner Fringe Signal Antenna
DL4
FB60800511 ElementsFringe Signal Antenna
Free To Air Antennas 1
Product Catalogue 2007 Page 21
Features
• Suitable for digital and analogue.• F Type connectors for better shielding and more reliable connections.• Rectangular galvanised steel boom construction provides element alignment.• Powder coated boom for longer life and improved aesthetics.• UV stable plastics for durability under harsh Australian conditions.• Australian designed and manufactured.• Suitable for reception of horizontal or vertical polarised transmissions
Specifi cations
Electriclal Channels Gain (dB) F-B Ratio (dB) VSWR (typical)
VHF VHF VHF VHF
DY4 6 - 12 6 - 8 14 - 15 2 : 1
DY6 6 - 12 7 - 9 15 - 17 2 : 1
DY10 6 - 12 8 - 11 14 - 27 2 : 1
DY14 6 - 12 9 - 13 15 - 23 2 : 1
Mechanical Construction Refl ector Boom Balun Connection Packaging
DY4 Straight Element15 by 15 Powder Coated
Aluminium Ferrite F Type Polysleeve Bag
DY6 Straight Element15 by 15 Powder Coated
AluminiumFerrite F Type Polysleeve Bag
DY10 Trigonal30 by 15 Powder Coated
Galvanised SteelFerrite F Type Fan Fold Carton
DY14 Trigonal30 by 15 Powder Coated
Galvanised SteelFerrite F Type Fan Fold Carton
VHF AntennaDigiTel Engineered For Digital Y Series VHF
DY4
FB6080064 ElementsPrime Signal Antenna
DY6
FB6080076 ElementsOuter Prime Signal Antenna
DY10
FB60800810 ElementsInner Fringe Signal Antenna
DY14
FB60800914 ElementsFringe Signal Antenna
Free To Air Antennas 1
Page 22 Product Catalogue 2007
VHF AntennaEFC™ VHF Wideband
EFC2 (Wideband VHF)
FB608011VHF channels, 2-127 ElementsPrime Signal AntennaForward gain 5-8dBFront to back ratio 11-17dBF Type Balun
EFC3/24
FB608013VHF channels, 2-12 9 ElementsFringe Signal AntennaForward gain 5-9dBFront to back ratio 20dBF Type Balun
VHF AntennaVHF Phased Array
CA8
FB601294VHF channels, 6-11 8 ElementsOuter Prime Signal AntennaForward gain 7-9.5dBFront to back ratio10.5-17dB
CA16
FB601308VHF channels, 6-1216 ElementsFringe Signal AntennaForward gain 12.5-15dBFront to back ratio 11-19dB
CA16 Vertical PolarityVHF channels, 6-12 16 ElementsFringe Signal AntennaForward gain 12.5-15dBFront to back ratio 11-19dB
CA16 with Gain LifterVHF Bands 1 to 3Fringe Signal AntennaForward gain 12.5-15dBFront to back ratio 11-19dB
Bolt on gain lifter kits are available for the CA8 and CA16 antenna to permit the reception and increased gain of low band channels.
Channel 2 Gain Lifter - FB601786CA8 Gain 4.5dBFront to back ratio 8dBCA16 Gain 6.3dB @ channel 2Front to back ratio 16dB
Replacement Part Kits are available for both the CA8 & CA16 antenna.
Front Insulator Replacement KitFB603546
Rear InsulatorReplacement Kit - FB603538
CA16 Take Off Assembly - FB602174
Free To Air Antennas 1
Product Catalogue 2007 Page 23
Caravan AntennaVantenna
Caravan AntennaNifti Nomad
Nifti Vantenna
FB608528A
An outstanding feature of the Nifti Vantenna is the rubber safety stoppers on the ends of the elements to protect van owners from injury during installation. The antenna comes complete with mast mounting brackets and carry bag for storage.
VHF channels 0-12UHF channels 28-69
VHF gain 0dB (dipole)UHF gain 6-9dB
UHF Front to back ratio 6-9dB
Features
• Easy to Install• Ideal for caravans, portable homes etc.• Prime signal UHF/VHF reception• Adjust height and direction from the ground• Horizontal or vertical polarisation• Includes: coaxial cable and connector, mast and mounting bracket.• Inbuilt element retaining clips to hold the longer elements in place when travelling.
Vantenna U/V Only
FB608527
Features
• Easy to Install• Ideal for caravans, portable homes etc.• Prime signal UHF/VHF reception• Mast fi tting or coaxial cable not included.
Nifti Nomad
FB608554
The new generation Caravan TV antenna, featuring segmented looped dipole and integrated balun to enhance UHF performance. The antenna comes complete with mast pole, fully fi tted coaxial cable, mounting brackets, screws and compact carry bag for storage.
VHF channels 2-12UHF channels 21-69
Features
• Easy to Install• Ideal for caravans, portable homes etc.• Unique folded colinear element design• Prime signal UHF/VHF reception• Receives FM radio• Adjust height and direction from the ground• Horizontal or vertical polarisation• Includes: mast pole, mounting bracket & screws, fully fi tted coaxial cable, carry bag to protect antenna & mast
Free To Air Antennas 1
Page 24 Product Catalogue 2007
Marine AntennaOmninova Marine
The Omni-directional antenna with built in amplifi er designed primarily for use on boats, but also giving superb results when used as a caravan antenna.
Of robust construction, the antenna is able to withstand the harsh Australian conditions.
The antenna element and amplifi er are both contained within a saltwater resistant, plastic housing fi lled with plastic foamensuring total protection against moisture damage.
All exterior metal parts are made from corrosion resistantmaterial and the is easily detached from its mountingbracket for storage. Power is supplied to the internal amplifi er via the downlead.
With its small dimensions, light weight and elegant design the Omninova Marine is the ideal mobile antenna.
Specifi cations
Product Code BC947
Gain
AM (dB) -1
BI (dB) 26
FM (dB) 20
BIII (dB) 28
UHF (dB) 30
PoweringAC (V) 220~240
DC (V) 12~24
Switching Output Voltage (V) 10/8 (On/Off)
Maximum Consumption (mA) 150
Free To Air Antennas 1
Product Catalogue 2007 Page 25
Indoor AntennaVHF / UHF 75 OHM
VHF / UHF Indoor Antenna
BC3640BP
VHF / UHF Rabbit Ears
BC89504BP
VHF / UHF Spiral
BC18
Requires Set Balun - BC3602
VHF / UHF / TV & FM Radio Amplifi ed
BC72474
Free To Air Antennas 1
2 Mounts & Hardware
Antenna Mounts ................................................. 28Mounts, Brackets & Stay Bars ................................... 28
Antenna Hardware .............................................. 31Hardware Accessories ............................................... 31
Masting ............................................................... 32Telomasts ................................................................... 32Galvanised Masting ................................................... 34
Satellite Mounts .................................................. 35Mounting Hardware ................................................... 35
Page 28 Product Catalogue 2007
D Clamp Bracket
175mm (7”)FB602448
Roof Deck Mount
(Pole not included)FB602414
Adjustable Roof Mount
FB602430
Loft Mount
FB602326
Rafter Mount
Left Hand - 1.8m (72”) x 32mm (11/4”)FB606340
Right Hand - 1.8m (72”) x 32mm (11/4”)FB607184
Wall Mount Accessory Pack
FB602350
Antenna MountsMounts, Brackets & Stay Bars
Iron Roof Mount
MK 2(for use with guyed mast)FB606374
Tiled Roof Mount
MK11FB606366
Metal Roof Mount
Metal Roof MountBC87182
Metal Roof Mount & U-Bolt KitKC4100
Vertical Standoff Arm
VM15 15”FB602376
Vertical Mount
VPB1 AssembleFB602384
Sheet Metal Fascia Bracket
215mm x 65mm(Used to provide support on metal fascias)FB602842
Mounts and Hardware 2
Product Catalogue 2007 Page 29
Antenna MountsMounts, Brackets & Stay Bars
Tripod Roof Mount and Mast
IronBC2844
TileBC2880
Chimney Brackets
No. 12 Single Chimney BracketFB602690
No. 6 Double Chimney BracketFB602552
40” Curved Chimney BracketFB602624
Curved Chimney Accessory KitFB604820
Eaves & Wall Bracket Eaves Brackets135mm (5”) FB607216275mm (11”) FB602594
Wall Brackets685mm (27”) FB6026081.0m (40”) FB6026161.4m (55”) FB603554
No. 17 kit (175mm & 685mm brackets with U-bolt & mast fi ttings) FB602788
Ridge Mount
FB607198
Curved Fascia Brackets
1m (40”) x 25mm (1”) RegularFB603004
1.4m (55”) x 25mm (1”) RegularFB602406
1.4m (55”) x 25mm (1”) VerticalFB606462
1.8m (72”) x 25mm (1”) RegularFB603298
2.7m (108”) x 25mm (1”) RegularFB603474
Heavy Duty Curved Fascia Brackets1.6m (64”) x 32mm (11/4”) RegularFB606404
Stay Bars1.2m (4”) x 16mm (5/8”)FB902048
1.8m (6”) x 16mm (5/8”)FB902056
2.4m (8”) x 16mm (5/8”)FB902064
1.8m (6”) x 25mm (1”)FB902072
1.2m (4”) x 25mm (1”)FB902072
2.4m (8”) x 25mm (1”)FB902098
Stay Bar Collars25mm FB90232838mm FB90211050mm FB902102
Mounts and Hardware 2
Page 30 Product Catalogue 2007
Antenna HardwareHardware Accessories
Flashings
DF100 Dektite Mini Flexible 0-35mmFor pipes & penetrations - Hanger PackBC88054
DF101 No. 1 Dektite 5-65mmFor Antennas & Satellite - Hanger PackBC88055
DF100 Dektite Mini Flashing Pack of 20 - Bulk PackBC88056
DF102 No. 2 Dektite 38-85mmPack of 10 - Bulk PackBC88057
DF102 No. 2 Dektite 38-85mmPack of 10 - Bulk PackBC88057
DF103 No. 3 Dektite 70-127mm Pack of 10 - Bulk PackBC88058
DNL101B Dektite 25-70mm Flashing KitBC86938
Eye Bolts
Eye Bolt & Nut 9” x 3/ 8” – Galv. BC2562
Cable Clip
6mm Black (Box of 100) BC86810
Cable Ties
200mm BC42
300mm BC43
U-Bolt Assembly
3½” x 5/16”FB607188
3” x 1/4” - Pk 5 FB901214
4” x 1/4” FB607187
5” x 5/16”FB607189
Tapes and Sealant
PVC Tape BC2966
18mm x 19mm Amalgon Tape BC86832
3m x 24mm Silicon 300G Translucent BC87011
Screw Eyes
75mm (3”) x 8mm (5/16”) - Pk 5 FB900002
100mm (4”) x 8mm (5/16”) - Pk 5 FB900010
140mm (5½”) x 8mm (5/16”) - Pk 1 BC3152
180mm (7”) x 8mm (6/16”) - Pk 1 BC86815
Mounts and Hardware 2
Product Catalogue 2007 Page 31
Antenna HardwareHardware Accessories
Guy Wire 30m 7/1.25 FB602658
91m 7/1.25 FB602666
100m 7/0.9mmFB603280
180m 7/0.9mm BC324
180m / 0.9mm SpoolMetal DrumBC71270
Guying Accessories
32mm Guy Plate (to suit 32mm mast) FB902224
38mm Guy Plate (to suit 38mm mast)FB902312
32mm Lock Ring (to suit 32mm mast)FB902178
38mm Lock Ring (to suit 38mm mast)FB902186
Hardware Accessories
Galvanised Guy Cleat FB602770
Clamp Saddle - Pk 10 FB901222
Offset V Block - Pk 10FB901256
Coach Screws
Pack of 100, 1½” x 5/16” BC900036
Pack of 100, 1½” x 3/8” BC900044
Pack of 100, 2” x 3/8”BC900052
Thimbles
6mm - BS462 BC5644
6mm - Pk 12FB901310
Turnbuckles
Turnbuckle 1/4” BC286
Turnbuckle 5/16” BC294
Wire Rope Grips & Clamps
5mm BC3694
6mm BC4024
8mm - BS462 BC5640
Wire Lashing Clamp - Pk 12FB901302
Mounts and Hardware 2
Page 32 Product Catalogue 2007
Telomast telescopic tubular masts (mast only)
6m (20’)FB180A
9m (30’)FB172A
12m (40’)FB164A
15m (50’)FB156A
4 Way Guying OptionThe parts lists shown are for 3 way guying. 4 way guying is often preferred when fi tting a Telomast onto the roof of a building. The additional parts required to do this are: 1 extra of each of the guy wires lengths shown 1 extra turnbuckle (BC294) per 3m mast section 1 Tile Ridge roof mount (FB606366) where appropriate. Contact your nearest Hills offi ce for more details.
MastingTelomasts Tubular telescopic guyed masts in heights of 6, 9, 12 15 meters. Lightweight, tubular Galvabond steel construction. Full range of mountings and rigging hardware available. Suitable for ground or roof mounting.
Accessory Packs
6m (20’)FB50A
9m (30’)FB68A
12m (40’)FB76A
15m (50’)FB84A
Mounts and Hardware 2
Product Catalogue 2007 Page 33
MastingTelomasts
To construct a Telomast the following components are required:
6m / 20” Telomast
6m TelomastFB180A
6m Accessory PackFB50A
5/16” Turnbuckles x 6BC294
1/4” Galvanised Thimbles (1 pk)FB901310
6mm Wire Rope Grips x 12BC3694
91mm (100’) 7/20” Guy WireGuy wire lengths - 3 x 17”, 3 x 25”FB603280
9m / 30” Telomast
9m TelomastFB172A
9m Accessory PackFB68A
5/16” Turnbuckles x 9BC294
1/4” Galvanised Thimbles (2 pks)FB901310
6mm Wire Rope Grips x 24BC3694
91mm (100’) 7/20” Guy WireGuy wire lengths - 3 x 17”, 3 x 25”, 3 x 39”FB602666
Telomast Foot Mount
Telomast Foot Mount (For use with guyed mast)FB602498
12m / 40” Telomast
12m TelomastFB164A
12m Accessory PackFB76A
5/16” Turnbuckles x 12BC294
1/4” Galvanised Thimbles (2 pks)FB901310
6mm Wire Rope Grips x 24BC3694
180mm (600’) 7/20” Guy WireGuy wire lengths - 3 x 17”, 3 x 25”, 3 x 39”, 3 x 48”BC324
15m / 50” Telomast
15m TelomastFB156A
15m Accessory PackFB84A
5/16” Turnbuckles x 15BC294
1/4” Galvanised Thimbles (2 pks)FB901310
6mm Wire Rope Grips x 36BC3694
180mm (600’) 7/20” Guy WireGuy wire lengths - 3 x 17”, 3 x 25”, 3 x 9”, 3 x 8”BC324
Telomast Base Plate
Telomast Base PlateFB602502
Mounts and Hardware 2
Page 34 Product Catalogue 2007
Masting - Galvabond
Size 1.8m x 25mm x 1.2mm (6’ x 1”) BC602746
2.4m x 32mm x 1.2mm (8’ x 1¼ ”) BC602826
3m x 32mm x 1.2mm (10’ x 1¼”) BC602762
3.4m x 32mm x 1.6mm (11’ x 1¼”) BC602914
4.5m x 32mm x 1.6mm (15’ x 1¼”)BC602922
4.5m x 38mm x 1.6mm (15’ x 1¼”)BC602930
3.3m x 38mm x 1.6mm (10’8” x 1½”) BC602948
3m x 51mm x 1.6mm (10’ x 2”)BC602972
6m x 51mm x 1.6mm (20’ x 2”) BC602998
Mast Caps
32mm RB21164
25mm RB48948
38mm BC86955
MastingGalvanised Masting
Hills offer a range of Masts and Masting Accessories.
Mast Extensions
Add A Mast FB603684
Mast Extension kit FB602392
Mounts and Hardware 2
Product Catalogue 2007 Page 35
EzyGutter MountWind Classifi cation:W60 with 65cm DishW50 with 85cm Dish
600mm - FB607162900mm - FB607163
BB Gutter Mount 600mm VSAT - FB607214
Extended Fascia Mount
Wind Classifi cation:W50 with 65cm DishW41 with 85cm Dish
FB607011
Flexi Mount
Wind Classifi cation:W60 with 65cm DishW55 with 85cm Dish
Tile Roof - FB607041ATin Roof - FB607042A
Wall Mount
Wind Classifi cation:W50 with 65cm DishW41 with 85cm Dish
FB606470
Soffi t / Ground Mount
Soffi t MountFB606648
Ground Mount 1.8 x 75mm (Pk of 27)FB607175
Vertical Surface Mount
Wind Classifi cation:W50 with 65cm DishW41 with 80cm Dish
Vertical Surface Mount - FB607059Extended Surface Mount - FB607058
BB Mount
Wind Classifi cation:W60 VSAT offset two way dishes BigPond 74cm
W55 VSAT two way dishes Patriot Ipstar 85cm
FB607204
2 Way Fleximount Tin Mount XHD
Wind Classifi cation:W60 Tin roof VSAT two way dishes Prodelin 98cm W50 Tile roof VSAT two way dishes Prodelin 98cmW60 Wall VSAT two way dishes
W60 Tin roof VSAT two way dishes Prodelin 120cmW41 Tile roof VSAT two way dishes Prodelin 120cmW41 Wall VSAT two way dishesProdelin 120cm
Tin- FB607137ATin / Wall Kit - FB607147A
2 Way Fleximount Mount HD (Kit Only)Wind Classifi cation:W60 Tin roof VSAT two way dishes Patriot IPstar 85cmW41 Tile roof VSAT two way dishes Patriot IPstar 85cmW60 Wall VSAT two way dishes Patriot IPstar 85cm
FB607133A
Satellite MountsMounting Hardware
Mounts and Hardware 2
3 Amplifiers
Masthead Amplifi ers & Associated Equipment .. 38Power Supply Units ................................................... 38BA10 .......................................................................... 39BA2/18 ....................................................................... 39A Series ...................................................................... 40Low Noise Digital Amplifi er ........................................ 41Q-Amp Amplifi er ........................................................ 41
Distribution Amplifi ers & Associated Equipment 42Minilink 25 .................................................................. 42Maxilink 35 ................................................................. 42Maxilink 40 ................................................................. 43HTA104 Amplifi er Splitter ........................................... 44HTA234 Amplifi er Splitter ........................................... 44Polytron ...................................................................... 45
Headend Amplifi ers & Associated Equipment ... 49Polytron ...................................................................... 49
Distribution Amplifi ers & Associated Equipment 56Televes ....................................................................... 56
Headend Amplifi ers & Associated Equipment ... 60Televes ....................................................................... 60
Headend Amplifi ers & Associated Equipment ... 64Astro ........................................................................... 64
Page 38 Product Catalogue 2007
Masthead Amplifi ers & Associated EquipmentPower Supply Units
PSU1
FC606202Power Input: 240VAC 50HzPower Output: 26VAC 50HzOutput Current: 70mA maxPAL Connections
PSU2
FC658025Plug-in unit for standard mains socketInput 20-250VAC: 1.6 WattsOutput (Under load) 15.5VAC: 90mAPAL Connections
PSU5F
BC7171115Vac@150mA F Type Connections
PSU7
BC7185212Vdc@500mA 2.1mm DC plug
PSU9
FC65815612Vdc@800mA UNREG2.1mm DC Plug
Amplifiers 3
PSU-2c
FC658024Power Input: 240VAC 50HzPower Output: 15VAC 50HzOutput Current: 100mA maxPAL Connections
PSU4P
BC8717915Vac@100mAPAL Connections
PSU6F
BC7171214Vdc@150mA F Type Connections
PSU8
FC65821012Vdc@500mA UNREG 2.1mm DC Plug
Product Catalogue 2007 Page 39
Masthead Amplifi ers & Associated EquipmentBA2/18
A low cost, easy to use domestic amplifi er boosts both VHF & UHF channels. Built in fi lter prevents FM radio interference, as well as minimising interference from Pagers and some Cellular Telephone Transmissions. Two output sockets to facilitate a second TV set.
Specifi cations
Product Code FC658047A
Frequency Range 40-70 & 174-860 MHz
FM & Pager Rejection 88-160MHz
Channels 2,3,4 &5 to 69
Gain 18dB (each outlet)
RLR >10dB
Noise Figure 5dB
Maximum Output 94 dBµV (4 channels)
Power Consumption 240vAC 50HMz, 1 watt
Masthead Amplifi ers & Associated EquipmentBA10
The BA10 Amplifi er Splitter is a simple solution when a second TV or FM radio is to be run off the one antenna and the signal is not strong enough to support both. The BA10 plugs into the power socket behind the TV and provides two 75 Ohms outlets.
Specifi cations
Product Code FC606228B
Frequency Range 40-860MHz
Nominal gain 11dB (each outlet)
Noise fi gure 3.5-4.5dB
Maximum output 85dBµV (VHF), 90-95 BµV (UHF)
Power consumption 240V, 50Hz, 1W
Amplifiers 3
Page 40 Product Catalogue 2007
Features
• Surface mount technology• Low noise• High gain with ultra wide band performance• High output• Good Impedance matching• Built in lighting static protection• In built fi lter rejects cellular telephone interference• Filter options to reduce some unwanted frequencies• Gold plated internal links to ensure reliable contacts
• UV Stable, weatherproof plastic housing• Suitable for 12V DC powering (eg. caravan or boat) or range of AC voltages• Optional through powering versions• Selectable FM rejection• Power indicated LED• Adjustable gain, separate adjustment for VHF & UHF bands
Masthead Amplifi ers & Associated EquipmentA Series
Designed for use in areas where signals are weak and require amplifi cation. Masthead Amplifi ers may be used in domestic situations or prior to a head-end in MATV / CATV systems. The A series amplifi ers are designed to cover the widest possible variety of applications in both UHF and VHF frequency bands.
Specifi cations
Product CodeGain dB
VHF UHF
FC658016A2A
CartonWide band VHF 45-230 MHz,
UHF 520-820MHzUse with separate or 1 combined UHF/UHF antenna
2518
3225
FC658206A2A
Blister PackWide band VHF 45-230 MHz,
UHF 520-820MHzUse with separate or 1 combined UHF/UHF antenna
2518
3225
FC658017 AVA VHF only 45-230 MHz Use with 1 VHF antenna 30 -
FC658018 AUA UHF only 470-820MH z Use with 1 UHF antenna - 32
FC658019 AVPU Amplify VHF Pass UHF Use with separate or 1 combined antenna 30 7
FC658020 AUPV Amplify UHF Pass VHF Use with separate or 1 combined antenna 3 32
FC658048 A3PU Amplify Band 3 174-230MHz pass UHF Use with separate or 1 combined antenna 30 9
Standard VHF Plug-in Filter OptionsProduct Code Description Freq MHz Pass/Rej/Att
FC658022 Band 3 174-222 Reject (Band 1-40dB)
FC658023 Pager 148-150 Reject (-50dB)
Amplifiers 3
Product Catalogue 2007 Page 41
Masthead Amplifi ers & Associated EquipmentLow Noise Digital Amplifi er
The Low Noise Digital Amplifi er has been designed for the reception of Digital Terrestrial TV.
Used in areas of multiple analogue and digital TV signals
Features
• Amplify TV Signals • Power LED Indicator• Analog & Digital Compatible • Fixed Gain• Switchable Inputs • Weather proof case• Pager / Cellular Notch Filters • FM Pass• Low Noise • Input & Output Triplexers
Specifi cations
Product Code FC658166 FC658204 FC658203
Model LNDA/PSU4P - Carton
LNDA/PSU4P - Blister Pack
LNDA/PSU5F - Blister Pack
Transistor Frequency Range Gain Output Levels
Amp 1 45MHz - 70MHz 18dB104-dBuV @ -60dB IMR
Amp 2 174MHz - 230MHz 21dB103-dBuV @ -60dB IMR
Amp 3 520MHz - 820MHz 24dB102-dBuV @ -60dB IMR
Maximum Input 78dBuV (Composite in any of the 3 bands)
LNDA Connections
F Type
Power SupplyBC87179 - PSU4P (14V -17V AC Pal Type)BC71711 - PSU5F (14V - 17V AC F Type))
Optional: BC71712 - PSU6F (10-14V DC F Type)
Noise Figure <3dB
Size Die-Cast: 95 x 65 x 20mmShroud / Cover 130 x 120 x 32mm
Masthead Amplifi ers & Associated EquipmentQ-Amp Amplifi er
The Hills Q-AMP is the ideal product for domestic and commercial applications. It has been specifi cally designed to provide versatile amplifi cation of broadband television signals. Several unique design features ensure that the amplifi er is adaptable to a wide range of conditions.
Specifi cations
Product Code FC658205
Transistor Frequency Response Gain
Band 1 45MHz - 70MHz Local 0-8dBRemote 22-30dB
Band 3 174MHz - 230MHz Local 0-8dBRemote22-30dB
Band 4 & 5 520MHz - 860MHz Local 0-10dBRemote24-34dB
Notch Filters
Pager 148-155MHz
Cellular >900MHz
FM Band -20dB
Maximum Output 104dBuV
All Connections F Type
Power Supply 14VDC / 150mA - PSU6F (BC71712)
Noise Figure <3.5dB @ VHF <2dB @ UHF
Sealing IP55
Standards &Compliance
C-Tick Approved, AS1053
Features
• Switchable Gains • Adjustable gain control• Improved Noise Figure • Die-Cast Housing• 1 or 2 Inputs • Power On Indication• Pager / Cellular / FM Filters • Earth Point Attachment• Weather proof case
Amplifiers 3
Page 42 Product Catalogue 2007
Distribution Amplifi ers & Associated EquipmentMinilink 25
Minilink 25
Minilink 25 F Type
The Minilink has been designed to provide adequate gain and output signal for use in small sized projects. The Minilink 25 features a unique positive 6dB slope. This slope increases to 8dB by use of the level control, as the gain is adjusted to minimum.
Specifi cations
Product Code FC658112A FC688112F
Model MiniLink 25 Minilink 25 F Type
Channel coverage 0-69
Frequency range MHz 40 to 860 MHz
Gain – Adjusted to max VHF 24dBUHF 28dB
Gain – Adjusted to min VHF 14dBUHF 21dB
Gain adjustment Variable 0 to 7dB
RLR Input & Output Typically 10dB
Noise fi gure <4.2dB
Output level VHF 113 dBµVUHF 110 dBµV
Power consumption 220-240V/2 watts
Dimensions (units) (packaged)
140mm x 80mm x 53mm310mm x 100mm x 70mm
Weight (packaged) 0.632Kg
Distribution Amplifi ers & Associated EquipmentMaxilink 35
Maxilink 35
Maxilink 35 F Type
Like the Minilink this unit is intended for use as a distribution amplifi er in small sized MATV systems.
However, it has a number of additional features.
Features
• Choice of one input or separate VHF & UHF inputs. A switch permits use of this function.• Independent gain controls for VHF & UHF • These function whether one or both inputs are used.• Higher Output Capability.
Specifi cations
Product Code FC658002A FC658002F
Model Maxilink 35 Maxilink 35 F type
Frequency range MHz 45-860MHz
Gain VHFGain UHF
33dB 36dB
Gain Adjustment VHFGain Adjustment UHF
-10dB-8dB
Noise fi gure <5dB
Output levels 2 channels VHFOutput levels 2 channels UHFOutput levels 6 channels UHF/VHF
117 dBµV115 dBµV110 dBµV
RLR input & output <8dB
Power consumption 220-240 VAC, 2 watts
Dimensions (units) (packaged)
140mm x 80mm x 53mm310mm x 100 x 70mm
Weight (packaged) 0.632Kg
Amplifiers 3
Product Catalogue 2007 Page 43
Distribution Amplifi ers & Associated EquipmentMaxilink 40
Maxilink 40
A Broadband Distribution Amplifi er designed to drive medium sized MATV systems. Split band circuitry permits high gain and output in a multi channel situation.
Features
• All coaxial sockets are F Type • 3 separate input sockets for VHF low, VHF high and UHF band.• Switches permit use of combined single input, two inputs (VHF/UHF) or all three inputs simultaneously.• Separate gain controls allow balancing of levels of all 3 bands.• Convenient – 30dB output test point.• Overload LED indicator to warn of excessively high input signal.• Built in fi lter reduces all signals of 30MHz and below.
Specifi cations
Product Code FC658005A
Channel coverage 0-69
Frequency range MHz 45-860MHz
Gain 40dB
Gain AdjustmentInput VHF low (45-150MHz)Input VHF high (170-250MHz)Input UHF (470-820MHz)
12dB10dB10dB
Noise fi gure <5dB
Output levels 2 channels VHFOutput levels 2 channels UHFOutput levels 9 channels UHF/VHF
120 dBµV116 dBµV110 dBµV
Test point -30dB to output
RLR input & output <8dB
Power consumption 220-240 VAC, 4 watts
Dimensions (units) (packaged)
270mm x 80mm x 53mm310mm x 100mm x 70mm
Weight (packaged) 0.632Kg
Amplifiers 3
Page 44 Product Catalogue 2007
Distribution Amplifi ers & Associated EquipmentHTA104 Amplifi er Splitter
FC658181Complete with Line Power Injector - (Blister Pack)
FC658211 No Line Power Injector (Carton)
Features
• For Terrestrial TV Signals• Splitter Amplifi er• Single Input• 4 Outputs• 12dB gain• Local or Remote Powering• Power through to masthead• Power LED Indicator• F Type Connections• Remote Powering any ports ie. Duplexes, Townhouses
Specifi cations
Product Code FC658181
Inputs/Outputs 1/4
Gain VHF ~ 11 dBUHF ~ 12 dB
Max Input 91 dBV (retaining 60 dBc intermodulation fi delity - DIN45004/AS1367
Max Output 103 dBV (retaining 60 dBc intermodulation fi delity - DIN45004/AS137
Noise Figure <6.0 dB
All RF Connections F Type
Power Supply 12-16 Vdc@150mA (Min acceptable)
Power Connector 2.1mm DC Jack, +ve tip
Sealing IP55
Standards and Compliance
C- Tick approved, AS1053
Distribution Amplifi ers & Associated EquipmentHTA234 Amplifi er Splitter
FC658197Complete with Power Plug Pack
Features
• For Terrestrial TV Signals• Single or Dual Inputs• 15dB Gain Control• Single Output• Test Point - 30dB• Power through to masthead• Power LED Indicator• F Type Connections• Remote Powering any ports ie. Duplexes, Townhouses
Specifi cations
Product Code FC658197
Inputs/Outputs 1/2
Gain VHF ~ 15-30 dBUHF ~ 19-34 dB
Max Input 91 dBV (retaining 60 dBc intermodulation fi delity - DIN45004/AS1367
Max Output 103 dBV (retaining 60 dBc intermodulation fi delity - DIN45004/AS137
Noise Figure <7 dB
All RF Connections F Type
Power Supply 12-16 Vdc@500mA (Min acceptable)
Power Connector 2.1mm DC Jack, +ve tip
Sealing IP55
Standards and Compliance
C- Tick approved, AS1053
Amplifiers 3
Product Catalogue 2007 Page 45
Distribution Amplifi ers & Associated EquipmentPolytron
CV Series Distribution Amplifi ers
Features
• Active or passive return path up to 30, 55 or 65 MHz configurable• CV ...126 in GaAs technology• Interstage module slot• Test sockets at input and output for measurements without interruption of operation• 2nd output can be configured to tap-off or distribution output
• Transit current separately configurable for inputs and out puts via fuses• Connections: PG 11 F Type via Adaptor• Safety class IP 66 • With AGC-Module VMC 05,application as AGC-Amplifier possible.
Specifi cations
Product CodeBC87323
CV30126NBC87325
CV40126N
Frequency range 4 - 30 MHz 47 - 862 MHz 4 - 30 MHz 47 - 862 MHz
Gain 14 - 24 dB 40 dB 14 - 24 dB 31 dB
Flatness ± 0.5 dB
Variable attenuator -10 dB -20 dB -10 dB -10 dB
Noise figure ≥ 6 dB ≥ 7.5 dB ≥ 6 dB ≥ 6.5 dB
Equalization/plug-in place 1 2 1 2
Output level dBµV MHz 450 606 862 450 606 862
60 dB IMR3 (DIN 45004B) 18 128 126 128 128 126
60 dB IMR2 (DIN 45004A1) 119 119 118 119 119 118
60 dB CTBA 117 114 112 17 114 112
60 dB CSO 118 115 113 118 115 113
Return loss 20 dB -40 MHz (-1,5 db/Octave)
Final stage GaAs-FET
Power supply typeN
180 - 255 V~13 W
N180 - 255 V~
13 WOperating Voltage
Power consumption
Transit Current 7A
Dimensions (W x H x D) mm (IP 66) 242 x 163 x 90 mm
Amplifiers 3
Page 46 Product Catalogue 2007
Distribution Amplifi ers & Associated EquipmentPolytron
HV Distribution Amplifi ers
Features
• For middle sized distribution systems• Active or passive return path up to 30, 55 or 65 MHz configurable• HV ...126 in GaAs technology• Amplification switchable between 28 or 36 dB• Interstage module slot• Bi-directional test socket for measurement of input signal without interruption of operation
• 2nd output with distribution, tap-off module or as test output (–20 dB) configurable• Configuration of transit line (HV ... F) separated for input and output and settable via fuses • With AGC-Module VMC 05, application as AGC-amplifier possible
Specifi cations
Product CodeBC87221
HV36119NBC87220 HV36119F
BC71566 HV40126N
Frequency range 4 - 30 MHz 47 - 862 MHz 4 - 30 MHz 47 - 862 MHz
Gain 14 - 24 dB 28/36 dB 14 - 24 dB 32/40 dB
Flatness ± 0.75 dB ± 0.75 dB ± 0.75 dB ± 0.75 dB
Variable attenuator -10 dB - 20 dB -10 dB - 20 dB
Noise figure ≤ 6 dB ≤ 7 dB ≤ 6 dB ≤ 7 dB
Equalization/plug-in place - 2 - -
Output level dBµV MHz 450 606 862 450 606 862
60 dB IMR3 (DIN 45004B) 120 120 119 128 128 126
60 dB IMR2 (DIN 45004A1) 110 107 105 119 119 118
60 dB CTBA 111 108 106 117 114 112
60 dB CSO 111 108 106 118 115 113
Return loss 20 dB - 40 MHz (-1.5 dB / Octave)
Final stage Push Pull GaAS-FET
Power supply type N F N
Operating Voltage 180 - 255 V~ 24 - 70 V~ 180 - 225 V~
Power consumption 10 W
Transit Current - 2,5 A -
Dimensions (W x H x D) mm (IP 66) 242 x 163 x 60 mM
Amplifiers 3
Product Catalogue 2007 Page 47
Distribution Amplifi ers & Associated EquipmentPolytron
MATV Distribution Amplifi ers
The new generation of MATV-Home-Distribution Amplifi ers HA30116 and HA40125 especially for use in small and medium size systems.All models are set up to fulfi ll fl exible and individual confi guration needs of the customer. Multimedia will be supported by active or passive return path modules. The new housing supports the protection class IP 65. The standard confi guration will be delivered with 4 x 10 dB set-point bridges.
Features
• Flexible return path concept • 30 / 65 MHz by plug-in modules• Output level up to 125 dB µV or 116 dB µV• Gain up to 30 or 40 dB• Compact Aluminium housing IP 65
Specifi cations
Product CodeBC87212 HA30116F
BC71273 HA40125N
BC87213 HA30116N
BC71897HB30115N
Frequency range 47 - 862 MHz oder 86 - 862 MHz*
Return Path 4 - 30 MHz oder 4 - 65 MHz*
Gain 30 / 40dB 30dB
Attenuator / Equaliser Intersage plug-in place 2/interstage plug-in place 2 10dB
Noise figure 6dB 6.5dB 6dB 5dB
Output level dBµV MHZ 450 606 862 450 606 862 450 606 862 450 606 862
60 dB IMR3 (DIN 45004B) 118 117 116 126 125 124 118 117 116 116 115 114
60 dB IMR2 (DIN 45004A1) 110 107 106 118 117 117 110 107 106 109 107 106
60 dB CTBA 106 104 100 115 111 109 106 104 100 -
60 dB CSO 101 97 94 113 110 109 101 97 94 -
Operating Voltage 27 - 70VAC 180 - 255 V~ 12 W 230 V~
Power consumption 6W 12 W 5 W
Current Transit 2.5A -
Housing (W x H x D) mm PA 60 (IP 65) 242 x 103 x 60 mm (IP 65) 196 x 96 x 51 mm
* Depends on the Return Path Module
Amplifiers 3
Page 48 Product Catalogue 2007
Distribution Amplifi ers & Associated EquipmentPolytron
Return Path Modules
The new return path modules with setpoint bridges for attenution and equalisation.The diplex fi lters are provided directly on the module.
Specifi cations
Product Code
BC71400 BC71401
ModelReturn Path
Modules PassiveReturn Path
Modules Active
Frequency range
4 ... 30MH 4 ... 65MHz 4 ... 30MH 4 ... 65MH
Gain -1 dB 20 dB
Attenuator 1 Plug-in place 1 Plug-in place
Equalizer 1 Plug-in place 1 Plug-in place
Max. output level
– 117dbµV
Distribution Amplifi ers & Associated EquipmentPolytron
Set-Point Bridges-Plug-in Potentiometers
With the new Set-Point-Bridges it´s possible to adjust an attenuation or equalization in 1 dB steps. The Set-Point-Bridges can be ordered individually or in 10 pieces pack or in a Service-Box .
The Service-Box 1 consists of the types VSP-1/3/5/7/9/11/13/15/17/19 dB - 5 pieces per type -
The Service-Box 2 consists of the types VSP-2/4/6/8/10/12/14/16/18/20 dB - 5 pieces per type. The new return path modules with setpoint bridges for attenution and equalisation.The diplex fi lters are provided directly on the module.
Specifi cations
Set-Point BridgesProduct Code Type Attenuation
BC71664 VSP 0 0 dB
BC71892 VSP 4 4 dB
BC71890 VSP 6 6 dB
BC71889 VSP 8 8 dB
BC71888 VSP 10 10 dB
BC71463 VSP Service Box 1
BC71891 VSP Service Box 2
Plug-in PotentiometersProduct Code Type Attentuation
BC71464 VSP 0 -10 0 - 10 dB
BC71465 VSP 0-20 0 - 20 dB
Amplifiers 3
Product Catalogue 2007 Page 49
Headend Amplifi ers & Associated EquipmentPolytron
Poly Compact SPM 1000 digi - Base Unit
Features
• Modular headend for small and medium sized systems• Easy programming by LCD-Display • 10 module slots• Ideal for residence complex, hotels and hospitals• Easy combination of several units• Wall mounting or installation into 19’’ cabinet• Foxtel Approved - F3020A
Specifi cations
Product Code BC71817
Module plug-in slots 10
LNB-supply 8 VDC 250 mA per input / max. 0,4 A
Frequency range 47-862 MHz
Return loss 14 dB
Output level 10 channels 100 dBµV
Power supply 180 -265 V~ 50/60 Hz
Power consumption max. 95 W
Housing (W x H x D) 433 x 244 x 177 mm
operating temperature 0 - 50°C
Headend Amplifi ers & Associated EquipmentPolytron
Poly Compact Base Units - SPM 100
Features
• For the insert of one (SPM100) or two (SPM200) modules of the PolyCompact series• Integrated programming unit and amplifi er• Example SPM 200: one slot for a digital twin module and one slot for a twin modulator
SPM 100 - TFor the twin modulators SPM-MMT-Q and SPM-MST-Q
SPM 100 - TDFor SPM - TD and SPM - TDT modules - power supply 12Vdc @ 1 Amp. (BC7049)
Specifi cations
Product Code BC71726 BC72217
Model SPM-100T SPM-100TD
Plug-in place 1
Output level 105 dBµV
Operating voltage 12 V=
Output voltage –
Dimensions 40 x 285 x 145
Amplifiers 3
Page 50 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentPolytron
DVB-S/AV Digital Single & Twin Converters
DVB-S reception modules for the conversion of QPSK modulated programs into audio / video signals. A modulator of the SPM series converts the AV signal into a TV channel.
The twin module SPM-PST supports the simultaneous conversion of two programs of one MPEG2 data stream.
Features
• Converts an QPSK modulated channel into audio / video signal• Supports digital radio • Supports teletext and subtitle• Watch - dog function • Picture format 4:3 / 16:9
Specifi cations
Product Code BC71758
Model SPM-PST (Twin)
Frequency range 950 - 2150 MHz
Input level 47 - 70 dBµV
Tuning 1 MHz steps
Symbolrate QPSK 2 - 40 Ms/s
FEC in accordance with DVB
Viterbi code rate (auto.) 1/2, 2/3, 3/4, 5/6, 7/8, 8/9
Audio level adjustable – 6 / –3 / 0 / +3 / + 6 dB
Video level 1 Vpp (± 1 dB) / 75 Ohm
Output connection SUB-D
Power consumption 8W
Headend Amplifi ers & Associated EquipmentPolytron
DVB-T/AV Digital Single & Twin Converters
DVB-T reception modules for the conversion of terrestrial COFDM modulated signals audio / video signals.
To be used in conjunction with SPM-MSTQ modulator cards.
Features
• Converts terrestrial COFM modulated channels into audio / video signals.• Free to air reception of a DVB-T signal• Supports digital radio • Supports teletext and subtitle• Watch - dog function • Picture format 4:3 / 16:9 • Available as single or twin stream cards
Specifi cations
Product Code BC72216 BC71531
Model SPM-PT (Single) SPM-PTT (Twin)
Input-Frequency range 147 - 230 / 470 - 862 MHz
Input level 50 - 75 dBµV
Tuning 250 KHz steps
Modulation COFDM 2 k, 8 k
FEC in accordance with DBV
Viterbi code rate (auto.) 1/2, 2/3, 3/4, 5/6, 7/8, 8/9
Audio mode 7/8 MHz
Audio level adjustable -6 / -3 / 0 / +3 / +6 dB
Video level 1 Vpp (±1 dB)/75 Ohm
Output connection 15 Pin Female
Power consumption 5.5W 8.5W
Amplifiers 3
Product Catalogue 2007 Page 51
Headend Amplifi ers & Associated EquipmentPolytron
Twin Modulators
The twin modulators SPM-MST-Q and SPM-MMT-Q support the conversion of up to 20 channels per base unit SPM 1000 digi. The twin modulators SPM-MST-Q and SPM-MMT-Q have superior noise fi gure parameters due to the fi ltering on the output and hence can be used for large MATV networks.
Features
• Adjacent channel operating• Audio input level adjustable• Two independent channels on one module• MSTQ Foxtel approved - F30205
Specifi cations
Product Code BC71607 BC71606
Model SPM-MST-Q SPM-MMT-Q
Operation mode AV/TV Stereo AV/TV Mono
Modulation Adjacent channel operating
Video input 1 Vpp (± 1 dB) / 75 Ohm
Audio- input 1 Vpp / 10 kOhm adjustable
Video bandwidth 20 Hz - 5 MHz
Audio bandwidth 40 Hz - 15 kHz
Signal to Noise 57 - 60 dB
Output frequency 45 - 862 MHz
TV-standard B/G B/G, D/K, I, M, N
Output level 95 dBµV
AV-connection SUB-D
Power consumption 5.5 W 5 W
Headend Amplifi ers & Associated EquipmentPolytron
Terrestrial Channel Converter
The SPM-TDT modules convert digital or analogue terrestrial TV channels from 45-862 MHz into the output frequency range of 45-862 MHz.The input level works between 65-85 dbµV in the AGC mode.
Features
• Converts an analogue or digital terrestrial channel• Adjacent channel operation• Low phase noise
Specifi cations
Product Code BC71818
Model SPM-TDT (TWIN)
Operating mode digital-TV/TV
Input frequency range 45 - 862 MHz
Input level 65 - 85 dBµV
AGC 65 - 85 dBµV
Output frequency range 45 - 862 MHz
TV-standard B/G, D/K, I, M, N
Spurious emission > - 60 dB
Output level 95 dBµV
Variable attenuator 0 - 10 dB
Power consumption 5 W 6.5 W
Amplifiers 3
Page 52 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentPolytron
SPM-FM4 Modulator
The SPM-FM4 modulates four audio signals of the FM range
Features
• Converts four audio signals of the FM range• Adjustible audio level per FM signal
Specifi cations
Product Code BC71816Model SPM-FM4
Operating mode Audio / FM
Frequency range Audio
Input level 65 - 85 dBµV
AGC 65 - 85 dBµV
Input level –
Output frequency range 87,5 - 108 MHz
TV-standard –
Output level 95 dBµV
Variable attenuator 0 - 10 dB
AV-connection RCA
Power consumption 2,5 W
Headend Amplifi ers & Associated EquipmentPolytron
SPM-FD4 FM Demodulator
The module SPM-FD4 is a FM Demodulator for the conversion of 4 FM signals into audio-stereo signals.Combining the module SPM-FD4 with the SPM-FM4, the audio-stereo signals can be reconverted into FM signals to create a 4 way FM converter.
Specifi cations
Product Code BC72848
Model SPM-FD4
Input
Frequency range 87,5 - 108 MHz
Input level 40 - 80 dBµV
Input connection F - 75 Ohm
Output
Output signal 4 x Audio
Audio Output level 300 mVrms
Selectivity 36 dB (± 200 kHz)
Stereo Channel Separation
29 dB
Output connection RCA
Others
Power consumption 2,5 W
Weight 0,52 Kg
Module housing 16(w) x 117(h) x 230(d) mm
Amplifiers 3
Product Catalogue 2007 Page 53
Headend Amplifi ers & Associated EquipmentPolytron
HQ Modulator
What distinguishes the HQ modulators of the HPM series is a high S/N ratio with an agile fi lter on the output ensuring a high suppress of interference and group delay.
Features
• High S/N ratio• Adjacent channel operation up to 862 MHz• Mono, stereo• Prepared for NICAM• Adjustable output level• Variable output fi lter• Interface for audio / video• Group delay precorrection• Foxtel approved - F30206
Specifi cations
Product Code BC71757
Model HPM-MSQ B/G
Operation mode AV/TV Stereo
Modulation Adjacent channel operating
Video input 1 Vpp (± 1 dB) / 75 Ohm
Audio- input 2 Vpp / 10 kOhm adjustable
Video bandwidth 20 Hz - 5 MHz
Audio bandwidth 40 Hz - 15 kHz
Output frequency 47 - 862 MHz
TV-standard B/G
Output level 86 dBµV
Audio input connector RCA
Video input connector RCA (optional BNC)
Headend Amplifi ers & Associated EquipmentPolytron
FM Amplifi er
The FM-broadband amplifi er SPM-FM amplifi es the FM-signals up to 40 dB.The required output level can be adjusted with the variable attenuator. Local transmitters with high signal level can be attenuated, by using the three implemented suppression fi lters.
Features
• Amplifi es the FM signal• Three adjustable suppression fi lters
Specifi cations
Product Code BC87371Model SPM-FM
Operating mode FM
Input level –
AGC Gain 40 dB
Input level –
Output frequency range 87,5 - 108 MHz
TV-standard –
Output level 90 dBµV
Variable attenuator 0 - 10 dB
AV-connection –
Power consumption 2,5 W
Amplifiers 3
Page 54 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentPolytron
FM Modules
FM into Audio-TV-Channel
The SPM-FM/TV module is especially designed for hotels and supports the distribution of FM channels by an audio channel of a TV set. The integrated black picture generator enables a black picture or the feeding-in of an external video signal.
Features
• Converts a FM signal into a tv channel• Adjacent channel operating• Integrated black picture generator• Input for an external video signal
Specifi cations
Product Code BC87406Model SPM-FM/TV
Operating mode FM/TV
Frequency range 87.5 - 108 MHz
Input level min. 15
AGC –
Input level 1 Vpp (±1 dB) 75 Ohm
Output frequency range 47 - 862 MHz
TV-standard B/G, D/K, I, M, N
Output level 95 dBµV
Variable attenuator 0 - 10 dB
AV-connection SUB-D
Power consumption 3 W
Headend Amplifi ers & Associated EquipmentPolytron
SAT-Insertion Amplifi er
Features
• For combination of SAT-IF and terrestrial signals• Remote feeding of LNBs via SAT-IF input• Remote feed voltage 0/13, 5/18V• Aluminium die-cast housing IP65• Prepared for DIN-rail mounting
Specifi cations
Product Code BC88200
Model SEV 40120 N/13-18V
Frequency range 47 - 862 MHz 900 - 2400 MHz
Gain -1 dB 40 dB
Variable attenuator - 0 - 20 dB
Equalizier - 0 - 20 dB
Output level - 120 dBuV
Noise Figure - < 9 dB
Remote feeding voltage 0/13.5/18 V max 250 mA
Operating voltage 207 - 253 V ~ / 6.5 - 12 W
Amplifiers 3
Product Catalogue 2007 Page 55
Headend Amplifi ers & Associated EquipmentPolytron
3RCA - SubD 2.0m
BC85505
Headend Amplifi ers & Associated EquipmentPolytron
Scart - SubD 2.5m
BC71898
Amplifiers 3
Page 56 Product Catalogue 2007
Distribution Amplifi ers & Associated EquipmentTeleves
Line Amplifi ers
IF 20 dB
20dB gain amplifi er powered by voltage from the coaxial cable to increase the level to the headend.
Specifi cations
Product Code BC89021
MATV
Frequency range MHz 950-2150
Gain dB - 2,5
Output level
DIN 45004 BdBµV -
Noise fi gure dB -
IF
Frequency range MHz 950-2150
Gain dB 20
Output level DIN VDE0855/12
dBµV 112,5
Noise fi gure dB < 5,5
General
Consumption mA 60 (12···18Vdc)
Max. bypass current 500 (OUT - IN)
Distribution Amplifi ers & Associated EquipmentTeleves
Satellite Amplifi cation
Specifi cations
Product Code BC89040
Model S363
Inputs 2
Outputs 1
IF path
Frequency range MHz 950-2150
Attenuator dB
0-20
Equaliser 0-12
Gain 35-45
Output level DIN VDE 0855/12 dBµV 124
Noise fi gure dB <9
MATV path
Frequency range MHz 47-862
Attenuator dB
-
Equaliser -
Gain -1.5
Output level DIN 45004 B dB
-
Noise fi gure -
General
Powering voltage Vac 230
Max. power consumption W 14
Current bypass mA 300 (13/17Vdc)
Dimensions mm 180x110x55
Amplifiers 3
Product Catalogue 2007 Page 57
Headend Amplifi ers & Associated EquipmentTeleves
TO3 System
BI - 5081BC71713
FM - 5082BC71633
BIII - 5083BC71638
UHF multichannel DTT - 5086BC71666
Specifi cations
Product Code BC71713 BC71633 BC71638 BC71666
Model 5081 5082 5083 5086
Bandwidth MHz
7 20.5 7 16/24/32/40
Frequency range 47-88 87.5-108 174-230 470-862(1) / 470-862(2)
Gain dB 50 35 50 50
Output level dBµV 123 114 123 111/109/108/108
Standard EN 50083-5
Noise fi gure dB <9
Regulation margin 35 35 35 30
Rejection between channels
40 (n±2) 30(3) 30 (n±2) 20 (ch.65)
Flatness <1 <3 <1 <3
Consumption at 24 Vdc mA 65 70
Preamp. max. current (24Vdc)
mA 100
Dimensions mm 35x197x83
Amplifiers 3
Page 58 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentTelevesCDC System
The headend controller allows remote control of a headend by using an external modem connected to the phone line or local control by connecting a PC directley to the headend controller.
Headend Controller PALBC71959
CDC ModemBC71960
Features
• Remote programming of devices • Headend’s state monitorization• Upload the confi guration of the headend from a PC• Generate a private TV channel• State screen information of the headend devices
Specifi cations
Product Code BC71959 BC71960
Model 5052 5839
Devices management
Max. number of devices in the bus 254
Bus control RS485, 3 thread
OSD Management
Headend information screen 4 screen max.
Programmable data screen 4 screen max.
Delay between sreens programmable
Modem connection
External modem serie, compatible AT 9600 band
Transmition speed 9600 baud
RF VSB Output
Output frequency MHz 46-862 (or list of channels)
Frequency steps kHz 250
Max. output level dBµV 80±5 (programmable)
Regulation margin
dB
15
USWR Output 14 typ.
Bypass losses <1.5
Spurious dBc 60 typ.
TV standard PAL
General
Consumption A (Vdc) 0.6 (5); 0.2 (15)
Amplifiers 3
Product Catalogue 2007 Page 59
Headend Amplifi ers & Associated EquipmentTelevesUniversal Modulators
The modulator accepts audio and video inputs and modulates them, according to the standard, in an IF of 38,9 MHz. The modulated IF signal is up-converted to any channelor frequency between 46 y862 MHz and, once fi ltered, is amplifi ed to obtain the desired Output Level. Programmable parameters: Output frequency or channel.
Stereo VHF/UHFBC71639
Features
• Output frequency or channel• Output level• Audio and video levels• Carrier ratio A/V• Audio freq. subcarrier• Audio selection 1 or 2 • Selection signal test• Device address• Remotely controllable via the CDC
Specifi cations
Product Code BC71639
Model 5802
Video
Bandwidth MHz 5
Input level (75 Ohms) Vpp 1
Modulation depth % 72.5...90
Group delay ns <100
S/N RatiodB
>52
Flatness < ±1
Audio
Bandwidth KHz 15
Impedance Ohms 10000
Pre-emphasis µs 50
S/N Ratio dB >45
RF VSB Output
Output Frequency MHz 46-862 (progr.)
Output Level dBµV 80±5 (progr.)
Carrier RatiodB
-11....-18 (progr.)
Loop-through losses <1.5
Return losses >10
Spurious band level dBc <60 typ.
C/N (5 MHz) dB >56
General
Consumption mA 225(5V)320 (15V)
Dimension mm 35x197x163
Amplifiers 3
Page 60 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentTelevesDigital Terrestrial Channel Processors (DTT) Analogue & Digital
Processors that converts the DTT input channel to IF (36.15 MHz) and then to the selected output channel. It includes a SAW fi lter to process the adjacent channels. The processors can be used as channel converters (using different input and outputchannels) or with the same input and output channel.
Channel Processor 7 MHzBC89073
Features
• Frequency /Channel (Input and output)• Output level• Converter/Amplifi er• A/V Carrier ratio• Device address• Remotely controllable via the CDC.
Specifi cations
Product Code BC89073Model 5871Input 177.5 - 858.5 MHz
Input frequency MHz
Frequency steps KHz ±125
Input level dBµV 52-102
Loop-through losses dB <1.5
RF VSB Output
Output frequency MHz 177.5 - 858.5 MHz
Frequency steps KHz ±125
Max. output level dBµV 85±5
Return losses
dB
>12
Variable gain 15
Slope regulation ±3
Loop-through losses <1.5
General
Consumption mA
(Vdc) 390(15) / 220(5)
Preamp. power supply Vdc 12 (UHF in)
Dimensions mm 35x197x163
Spurious dBc 60 typ.
TV standard PAL
General
Consumption A (Vdc) 0.6 (5); 0.2 (15)
Preamp. power supply Vdc 12 (UHF in)
Dimensions mm 35x197x163
Amplifiers 3
Product Catalogue 2007 Page 61
Headend Amplifi ers & Associated EquipmentTelevesCOFDM-PAL (Stereo)
Transmodulator a terrestrial digital channel to an analogue terrestrial channel either in VHF or UHF
COFDM-PAL-Stereo BC89076
Features
• Input and output channel.• Output level.• Video and Audio program selection.• Video modulation index.• Audio deviation.• Audio carrier frequency.• A/V ratio• Remotely controllable via the CDC
Specifi cations
Product Code BC89076
Model 5044
COFDM demodulator
Input through losses dB 1.2
Input frequency MHz
174-230 / 474-858 (or channel tables)
Frequency steps 1
Input level dBµV 49 to 89 (8k; 64 QAM;FEC 2/3)
Return losses dB >12 (46-862 MHz)
Bandwidth fi lter SAW MHz 7 - 8 programmable
MPEG Decoder
Input format TS MPEG-2/DVB
Decoding MP@ML
TS input rate Mbps
60 max.
Video rate 1.5 to 15
Video resolution Max. 720x576
Video output composite PAL
RF VSB Output
Output frequency MHz 46-862 (or channel tables)
Frequency steps KHz 250
Max. Output level dBµV 80±5
Variable gain dB
15
Through losses <1.5
Spurious band level dBc 60 typ.
General
Consumption A (Vdc) 1.2 (5) / 0.4 (15)
Dimensions mm 35x197x163
Amplifiers 3
Page 62 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentTeleves
MATV Launch Amplifi er
Launch amplifi er for headend equipment. Provided with 2 inputs to mix its output with channels coming from differentsystems.
Specifi cations
Product Code BC89056Model 5075Frequency range MHz 47-862
Gain dB
45
Gain regulation 20
Output level
CTB (-60 dB, 42c)
dBV
105
CSO (-60 dB, 42c) 105
XMOD (-60 dB, 42c) 105
Noise Figure dB <10
General
Powering voltage Vdc 15
Consumption A 0.8
Dimensions mm 35x197x163
Headend Amplifi ers & Associated EquipmentTeleves
PSU
Switched PSU for T-03 & T-05
Specifi cations
Product Code BC89055
Model 5029
Mains voltage Vac 230±15
Frequency Hz 50/60
Output voltage Vdc 24 18 15 5 24
Max. output current
A 0.55 0.8 4.2 (*) 6.6 2.5
Max. output powering
W 13.2 14.4 63 (*) 33 60
Dimensions mm 56x197x163 55x197x83
Amplifiers 3
Product Catalogue 2007 Page 63
Headend Amplifi ers & Associated EquipmentTeleves
Accessories - Cabinets and Supports
Wall mount (10M+PSU) - 5071BC89065
Lockable cabinet (10M+PSU) - 5072BC71885
19” Rack frame (10M+PSU) - 5301BC89054
Headend Amplifi ers & Associated EquipmentTeleves
Accessories - Cabinets and Supports
Wall mount (10M+PSU) - 5071BC89065
Lockable cabinet (10M+PSU) - 5072BC71885
19” Rack frame (10M+PSU) - 5301BC89054
Headend Amplifi ers & Associated EquipmentTeleves
Accessories - Various
Blank plate - 5073BC89071
F-Type 75 Ohms load DC Blocked - 4061BC71669
Link F connector - 5074BC71668
Amplifiers 3
Page 64 Product Catalogue 2007
Headend Amplifi ers & Associated EquipmentAstro
QPSK - QAM
Features
• Used for processing and conversion of two QPSK or 8PSK satellite IF signals into QAM modulated adjacent channels in the frequency range 47 – 862Mhz• Integrated stuffi ng unit, PCR correction, PID fi ltering as well as NIT construction (Twin 5 & Twin 6S2) only, these cards suit a variety of today’s and future applications.• HDTV applications and QAM 256 with MER 45dB, Twin 6S2• The two output channels can be switched on and off separately from one another• Each board has a level control for matching each output RF channel. • Foxtel approved F30280 & F30267.
Specifi cations
Product Code BC71866 BC72267 BC72785
Model QAM Twin 3 QAM Twin 5 QAM Twin 6S2
Input Demodulator
QPSK Demodulator Yes Yes Yes
DVB-S2 No No Yes
Input Frequency Range 920 - 2150MHz
Input Level / Ω 50 - 80dBuV / 75
Input Data Rate 10 - 30MS/s 2.4 - 30MS/s
Viterbi 1/2, 2/3, 3/4, 5/6, 7/8 Auto & Manual
Roll Off 35%
QAM Modulator
Modulation 16 - 256QAM
COS Roll Off 15%
FEC Reed - Solomon (204, 188) - Code
PCR Yes Yes Yes
PID Filtering Yes Yes Yes
NIT Construction No Yes Yes
Output Symbol Rate 3.45 - 6.950Ms/s
Bandwidth 4 - 8MHz
RF Output
Connection IEC Male
Frequency Range 47 - 862MHz
Output Level 80 - 90dBuV adjustable
MER (64 QAM Equalizer) 40dB 40dB 45dB
Temperature Range 0 - 50°C
Headend Amplifi ers & Associated EquipmentAstro
QPSK - PAL Twin FTA
Features
• Designed for the transcoding of two digital satellite TV programmes into two standard analogue Pal signals in the frequency range 47 – 862MHz.• Two independent input satellite demodulators• Two RF adjacent output TV channels• Level control for matching each output RF channel.
Specifi cations
Product Code BC72786
Model QPSK - PAL Twin FTA
Input Demodulator
QPSK Demodulator Yes
COFDM Demodulator No
Input Frequency Range 950 - 2150MHz
Input Level 50 - 80dBuV
Input Connection F Type
Return Loss 10dB
Input Bandwidth 36MHz
Input Data Rate 2 - 35MS/s
RF Modulator
Connections IEC Male
Output Frequency Range 47 - 862MHz
Output Level 90 - 100dBuV
IMR 60dB
Return Loss 10dB
TV Standard PAL B/G
Video SNR Typical 60dB
Temperature Range 0 - 50°C
Amplifiers 3
Product Catalogue 2007 Page 65
Headend Amplifi ers & Associated EquipmentAstro
COFDM - PAL Twin FTA
Features
• Designed for the processing of two digital terrestrial TV programmes into two standard analogue Pal signals in the frequency range 47 – 862Mhz.• Two independent input COFDM demodulators• Two RF adjacent output TV channels• Level control for matching each output RF channel
Specifi cations
Product Code BC72135
Model COFDM - PAL Twin FTA
Input Demodulator
QPSK Demodulator No
COFDM Demodulator Yes
Input Frequency Range 47 - 862MHz
Input Level 60 - 85dBuV
Input Connection IEC Female
Return Loss 10dB
Input Bandwidth 7/8MHz
RF Modulator
Connections IEC Male
Output Frequency Range 47 - 862MHz
Output Level 90 - 100dBuV
IMR 60dB
Return Loss 10dB
TV Standard PAL B/G
Video SNR Typical 60dB
Temperature Range 0 - 50°C
Headend Amplifi ers & Associated EquipmentAstro
V16.3 Base Unit
Base UnitBC71611
Features
• 8 slots for the connections of different plug in cards for the conversion of digital Satellite and Terrestrial TV signals.• Complete with temperature controlled cooling fans, 6-input & 16-output multiswitch, cover case and rack mounting kit.• Power supply interchangeable without disassembling plug in cards.• Integrated Bus adaptor allowing fully maintained and programmed remotely.• 230Vac / 50Hz with operating temperature 0 - 50°C• 7 RU high, (340mm x 426mm x 277mm)• Foxtel Approved – F30265
Bus Controller
Bus ControllerBC71855
Features
• Control and monitor the headend from remote location via PC.• 8 digital access code for protection against unauthorized use.• Auto disconnect from line after 5 minutes of silence.• 6Vdc @35mA consumption• Alarm indication via SMS• Foxtel approved F30266
Programming Software and Cables
BC72262
• Null modem cable and Bus adaptor for PC – Base Unit communication.• CD with programming software, update software and confi guration fi les.
Amplifiers 3
4 Passives
Splitters .............................................................. 685-2050MHz ................................................................ 68
Directional Couplers ........................................... 69Taps Satellite (5-2050 MHz) ....................................... 694 Way Taps Terrestrial (5-860MHz) ............................ 70
Diplexers, Triplexers & In Line Filters.................. 71Diplexers, Triplexers & In Line Filters ......................... 71
Page 68 Product Catalogue 2007
Splitters5-2050MHzWhen it comes to Engineered For Digital installations, the screening factor of all components becomes very important. A high screening factor is one of the many advantages that F Type connectors have over the older screw and saddle style of product.
• Wideband 5 to 2050 MHz• Golden type connector pins• Zinc Diecast Hybrid Housing• Satellite compatible• Two way System Compatible• High RF Shielding 80Rfi • 75 ohm Impedance• High Return Loss • Better than 20dB• Earth Connection
Specifi cations
Electrical2 way 3 way 4 way 6 way 8 way
DC PASS All Ports BC15482S BC15166S BC15484S BC15164S BC15254S
AC/DC One Port BC15173S BC15167S BC15470S BC15252BP BC15253BP
INSERTION LOSS (MAX.)
5-40 4.4 6.7 8.3 10.5 13.5
40-1000 4.3 6.7 8.2 10.5 13.5
1000-1750 4.5 8.8 10 11 14
1750-2050 6.3 10 11 13 14.3
2050-2400 7.0 11.2 12 15.5 16
ISOLATION (MIN.)
5-40 17 19 15 22 22
40-1000 22 25 25 25 17
1000-1750 25 25 22 24 20
1750-2050 25 25 22 22 20
2050-2400 25 25 17 22 18
RETURN LOSS (MIN.) IN/OUT PORT
5-40 15 16 15 7 6
40-1000 14 16 15 7 6
1000-1750 14 15 12 15 14
1750-2050 15 15 12 12 12
2050-2400 15 14 12 12 12
RETURN LOSS (MIN.) TAP PORT
5-40 10 10 8 9 8
40-1000 15 18 15 15 12
1000-1750 14 15 18 14 15
1750-2050 14 14 12 12 13
2050-2400 14 12 12 12 12
Passives 4
Product Catalogue 2007 Page 69
Directional CouplersTaps Satellite (5-2050 MHz)
1 Way Tap
DCW10 BC15265DCW15 BC15266DCW20 BC15267
2 Way Tap
DCW10 BC15276DCW15 BC15277DCW20 BC15486
4 Way Tap
DCW10 BC15288DCW15 BC15289DCW20 BC15492
Features
• Wideband 5 to 2050 MHz• Golden type connector pins• Zinc Diecast Hybrid Housing• Satellite compatible• Two way system compatible• High RF shielding 80Rfi • 75 ohm Impedance• High Return Loss • Better than 20dB• Earth connection
Passives 4
Specifi cations
ElectricalBANDWIDTH 10MHz – 2300MHz
INSERTION LOSS (MAX.)
10-40MHz 4.5
40-1000MHz 5.5
1000-1750MHz 6.0
1750-2050MHz 6.5
2050-2300MHz 8.0
ISOLATION (MIN.) OUT-TAP
10-40MHz 20/25
40-1000MHz 25/25
1000-1750MHz 30/23
1750-2050MHz 30/20
2050-2300MHz 18/18
TAP LOSS(+/-)
10-40MHz 2
40-1000MHz 2
1000-1750MHz 2
1750-2050MHz 2
2050-2300MHz 2
BANDWIDTH 10MHz – 2300MHz
RETURN LOSS (MIN) IN/OUT/TAP
10-40MHz 10/10/6
40-1000MHz 12/15/12
1000-1750MHz 12/13/12
1750-2050MHz 12/12/15
2050-2300MHz 10/10/10
DC PASS IN-OUT YES
Page 70 Product Catalogue 2007
Directional Couplers4 Way Taps Terrestrial (5-860MHz)Taps are widely used in 860MHz frequency range, where a signal trunk cable is run / dropped down the riser or along a corridor. Different tap values are used to balance out the system.
• Frequency Range 5- 860MHz• Power through IN – OUT ports• Zinc Diecast housing • Two way system compatible• 75 Ohm Impedance• Earth Connection
Specifi cations
ElectricalProduct Code BC71723 BC71724 BC71725
Value 10dB 15dB 20dB
TAP LOSS (VA.+/-)
5-40MHz 1.0 1.0 1.2
40-550MHz 1.0 1.0 1.2
550-860MHz 1.5 1.2 1.0
860-1000MHz 2.0 1.5 1.5
INSERTION LOSS(MAX.)
5-40MHz 3.5 1.6 1.0
40-550MHz 3.8 2.2 1.0
550-860MHz 4.0 2.4 1.2
860-1000MHz 4.2 3.0 1.6
ISOLATION(MIN.) OUT-TAP
5-15MHz 20 20 25
15-40MHz 30 30 35
40-550MHz 25 25 25
550-860MHz 25 24 25
860-1000MHz 20 20 25
ISOLATION(MIN.) TAP-TAP
5-15MHz 20 20 20
15-40MHz 30 30 30
40-550MHz 20 20 22
550-860MHz 20 20 22
860-1000MHz 20 20 20
Product Code BC71723 BC71724 BC71725
Value 10dB 15dB 20dB
RETURN LOSS (MIN.) IN/OUT PORT
5-15MHz 20 18 20
15-40MHz 20 20 20
40-550MHz 20 18 20
550-860MHz 20 18 20
860-1000MHz 20 18 20
RETURN LOSS (MIN.) TAP PORT
5-15MHz 20 20 20
15-40MHz 25 25 25
40-550MHz 20 20 20
550-860MHz 20 20 20
860-1000MHz 20 20 20
DC PASS IN-OUT YES
Passives 4
Product Catalogue 2007 Page 71
Diplexers, Triplexers & In Line FiltersDiplexers, Triplexers & In Line Filters
Engineered For Digital Diplexers
UHF / VHF Outdoor F type- Blister PackBC44022BP
Free To Air & SatelliteInputs: LO 45-860MHz, HI 900-2400MHzBC44021
Indoor Diplexer
DPX2Channels: 0-5A/6-11Insertion Loss: 1dBRejection: 15dBInputs: LO 40-145MHz, HI 170-225MHzCross-over frequency: 160MHzVSWR 2:1FC607456
Outdoor Diplexer
DPUV UHF/VHFChannels: 0-12 VHF, 28-69 UHFInsertion Loss: 1dB VHF, 1.5dB UHFR.L.R. ± 15dB VHF, +7dB UHFInputs: LO 10-300MHz, HI 450-1000MHzFC658056
OH1 Outdoor HousingFC608722
SAT / FTA Diplexers
SAT / FTA DiplexerInsertion Loss: 45-862MHz < 1dBInsertion Loss: 950-2050MHz
ClipsalFoxtel approval number: F10468BC89239
HPMFoxtel approval number: F10469BC89240
Triplexers
TPX NWChannels: 0-5A, 6-11 & 28-69FC609476
Hills F Type In Line Screened Filters
FM Filter 45dB Rejection (88-100MHz)FC658084
Band 1, 12dB & FM, 45dB RejectionFC658085
High Pass Filter (520-860MHz)FC658089
Hills FM Filter
Indoor FM Rejection FilterBC44264BP
UHF / VHF Diplexer
UHF / VHF F typeFC658208
Passives 4
5 Coaxial Cable
Hills ..................................................................... 74RG Coaxial Cable ....................................................... 74Hardline Coaxial Cable .............................................. 76
Belden ................................................................ 77RG Coaxial Cable ....................................................... 77
Page 74 Product Catalogue 2007
RG6 Quadshield 100mBC46062
RG6 Quad 305m Reel in BoxBC46060
RG6 Quad 305m Wooden Reel BC46061
RG6 Quad 500m Wooden ReelBC71137
RG6 Quad 1000m Wooden ReelBC71456
RG6 Quad Siamese 152m Wooden ReelBC72384
HillsRG Coaxial Cable
RG59
RG59 Standard Unbonded 100mBC71135
RG6
RG6 Standard Bonded 100mBC46065
RG6 Trishield 305m Wooden ReelBC46076
RG6 Tri-Flooded 500m Wooden ReelBC71175
RG11
RG11 Quad Flooded 305mWooden ReelBC46071
RG11 Quad 305m Wooden ReelBC46070
RG59 Hills Audio / Video Black 100mBC72414
White 100mBC72415
Coaxial Cable 5
Product Catalogue 2007 Page 75
Cable Construction
RG59 RG6 RG11
Standard Shield
Standard Shield
Trishield Tri-fl ooded Quadshield Quadshield Quad-fl ooded
Item BC71135 BC46065 BC46076 BC71175
BC46062BC46060BC46061BC71137BC71456
BC46070 BC46071
Inner Conductor Dia. (mm) 0.81 1.02 1.02 1.02 1.02 1.63 1.63
Insulatrion Dia. (mm) 3.66 4.57 4.57 4.57 4.57 7.11 7.11
First Layer Shield Dia. (mm) 3.82 4.75 4.75 4.75 4.75 7.28 7.28
Jacket Dia. (mm) 6.1 6.9 7.05 7.05 7.62 10.3 10.3
Capacitance (pf/m) 53 54 54 54 54 51 51
Characteristic Impedance (W) 75 75 75 75 75 75 75
Insulance (MW/Km) 5000 5000 5000 5000 5000 5000 5000
Dielectric Strength (V) 1500 1500 1500 1500 1500 1500 1500
Frequency (MHz) Attenuation @ 20ºC dB/100m
RG59 RG6 RG11
5 2.82 1.90 1.16
55 6.73 5.25 2.96
211 12.47 10.00 5.78
250 13.45 10.82 6.35
350 15.75 12.63 7.65
400 16.73 13.61 8.25
450 17.72 14.43 8.79
550 19.52 16.08 9.82
750 22.87 18.54 11.62
865 24.67 20.01 12.58
1000 26.64 21.49 13.64
1200 - 23.89 14.62
1450 - 26.30 16.01
2000 - 32.00 20.00
Specifi cations
HillsRG Coaxial Cable
Coaxial Cable 5
Page 76 Product Catalogue 2007
Specifi cations
Cable ConstructionMaterial Diameter (mm)
Inner Conductor Copper Clad Aluminum 2.77
Dielectric Physical Foam Polyethylene 11.43
Outer Conductor Welding Smooth Aluminum Tube 12.70
Jacket Polyethylene or Flame Retardant Polyethylene 14.22
Messenger Steel 2.77
Electrical Characteristics
Capacitance (nF/km) 50
Impedance (ohm) 75
Velocity (%) 88
Inner Conductor DC Resistance(Ω/km) 4.40
Outer Conductor DC Resistance(Ω/km) 1.21
Loop DC Resistance(Ω/km) 5.64
Shielding Effectiveness (dB) >100
Return loss(≥dB)
VHF 23
UHF 20
Mechanical Characteristics
Min. Bend Radius (mm) 152
Max. Pulling Tension (kgf) 136
Min. Breaking StrengthOf Messenger (kgf)
816
Storage Temp. (˚C) -70 to+85
Installation Temp. (˚C) -40 to+85
Operating Temp. (˚C) -40 to+70 Frequency (MHz) Attenuation @ 20ºC dB/100m
5 0.52
55 1.77
211 3.58
250 3.94
270 4.07
300 4.30
325 4.49
350 4.69
400 5.02
450 5.35
500 5.67
550 5.97
600 6.27
750 7.09
865 7.68
1000 8.27
HillsHardline Coaxial Cable
Hardline 500 - 720 Metre Drum
Hardline 500 - 720m DrumBC88010
Coaxial Cable 5
Product Catalogue 2007 Page 77
RG59
RG59 Standard Unbonded - 305mBC89510
RG11RG11Q - 305mBC46034
RG11 QF - 305mBC8713
RG11 QF Messenger - 305mBC8714
RG6RG6 Tri Shield Flooded - 305mBC46048
RG6 Tri Shield - 305mBC46044
RG6 Tri Shield Messenger 305m BC46047
RG6QRG6Q - 100m Reel BC72479
RG6Q - 305m BoxBC46040
RG6Q - 305m Reel BC46032
RG6 QF - 305mBC87149
Cable ConstructionNumber of Coax 2
Total number of conductors 2
AWG Stranding 18
AWG Conductor Diameter 1.016mm (nominal)
AWG Conductor Material BCCS - Bar Copper Covered Steel
Insulation material Gas-injected FPE - Foam Polyethylene
Insulation Diameter 4.572mm (nominal)
Outer shield1st layer-
2nd layer-3rd layer-4th layer-
Bonded Al foil (100% coverage)Al braid (60% coverage)
Al foil/Polyester/Al foil (100% coverage)Al braid (40% coverage)
Outer Jacket Material PVC - Polyvinyle Chloride
Outer Jacket Colour Black
Outer Jacket Diameter 7.3 x 15.0mm (nominal)
Mechanical CharacteristicsCable Weight 99 kg/km
Pulling Tension 720 N (maximum)
Bend Radius (Install) 76.2 mm (minimum)
Sweep Testing 5 MHz to 1 GHz
Operating Voltage 350 Vrms (maximum)
Frequency (MHz) Attenuation @ 20ºC dB/100m
5 2.20
55 5.25
211 9.41
270 10.63
300 11.25
350 12.20
400 13.15
450 13.97
550 15.45
750 18.34
870 19.68
1000 21.45
Electrical CharacteristicsImpedance (ohm) 75 +/-3 Ohms
Nom. Inductance 0.318 Micro-H/m
Nom. Compacitance Conductor to Shield 53.14 pF/m
Nom. Velocity of Propagation 82%
Nom. Delay 3.94 ns/m
Structural Return Loss 5 to 1000 MHz: 20 dB (min.)
Nom. Cond. DC Resistance @20ºC 102 Ohms/km
Nom. Shield. DC Resistance @20ºC 23.6 Ohms/km
Specifi cations - BC71502
BeldenRG Coaxial Cable
Coaxial Cable 5
6 Connectors & Adaptors
Hex Crimp, Compression & Twist Connectors ... 80RG59, RG6 & RG11 ................................................... 80
Connectors ......................................................... 81Hardline, Terminators & F Type Nuts & Washers ........ 81
Adaptors ............................................................. 82F Type and IEC Type .................................................. 82F Barrels and RCA ..................................................... 83
Page 80 Product Catalogue 2007
RG59 Connectors Hex Crimp - F type BC2090BC2090BP
Hex Crimp - IEC PAL Male type BC3722
TwistBC88095BC88095BP
Compression F type SilverBC88107
Compression F type GoldBC71445
Compression RCA Male Universal GoldBC70503
Compression RCA Male Universal SilverBC71504
Compression BNC SilverBC89231
Double Bubble BNC SilverBC72224
Compression RCA Female with Clipsal insertBC71716 - Black Clipsal 4 PackBC71717 - BlueBC71718 - GreenBC71719 - OrangeBC71720 - RedBC71721 - WhiteBC71722 - Yellow
Compression IEC PAL Male TypeBC89219
Compression IEC PAL Female TypeBC89220
Coax Plug - PAL MaleBC810
Coax Socket - PAL FemaleBC824
RG59 Connectors
F Right AngleBC72240
RCA Right AngleBC72710
BNC Right AngleBC72711
RG6 Connectors Hex Crimp - F typeBC2092BC2092BP
IEC PAL TypeBC87157 - MaleBC87156 - Female
Double Bubble IEC PAL MaleBC72483
Double Bubble IEC PAL FemaleBC72484
RG6 TwistBC14302BC14302BP
Compression F typeBC88106 - RG6 TrishieldBC88097 - DS6QBC71530BP - HC6Q (Pk 10)BC71688 - Double Bubble with O-Ring
Compression BNCBC89222 - Gold
Compression BNCBC89204 - Silver
RCA - GoldBC72246
RCA - SilverBC72245
Hex Crimp, Compression & Twist ConnectorsRG59, RG6 & RG11
Connectors and Adaptors 6
Product Catalogue 2007 Page 81
RG6 Connectors Compression IEC PAL Type BC72370 - Female BC72371 - Male
BNC Double Bubble - SilverBC72225
F Right Angle BC72239
Hardline ConnectorsKS or Pin TypeBC71179
F Male TypeBC71178
Terminators
F TypeBC72028
Connector Accessories - F Type Nuts & Washers
NutBC15352
WasherBC15353
RG11 Connectors
Hex Crimp F Type Integrated PinBC15225
Hex Crimp F Type Seperate PinBC2094
Compression F TypeBC89237
Mini - 1 RGB & 1.5 RGB
RCA 1 RGB 1 Piece - SilverBC72702
BNC 1 RGB 1 Piece - SilverBC72779
RCA 1.5 RGB 1 Piece - SilverBC72227
Hex Crimp, Compression & Twist ConnectorsRG59, RG6 & RG11
ConnectorsHardline, Terminators & F Type Nuts & Washers
Connectors and Adaptors 6
Page 82 Product Catalogue 2007
F Female
IEC PAL Male BC3718
IEC PAL Female (5 pack)BC15298BP
F Male Push onBC71710
BNC MaleBC3710
IEC PAL Female Right AngleBC15316
F Male Right AngleBC3720
RCA MaleBC15308
IEC PAL Female - IEC PAL FemaleBC3618 (Pk2)BC812 (Pk25)
F Male
IEC PAL MaleBC71578
IEC PAL FemaleBC5728
RCA FemaleBC3716
F MaleBC87038
BNC FemaleBC3714
AdaptorsF Type and IEC Type
Connectors and Adaptors 6
Product Catalogue 2007 Page 83
F Barrels
High Return LossBC71150
F81-21mmBC15177BC15177BP (pk5)
High Return Loss Complete with Clipsal insert (pk25)BC71933
High Return Loss Complete with HPM insert (pk25)BC71934
RCA
RCA Female to BNC MaleBC15301
AdaptorsF Barrels and RCA
Connectors and Adaptors 6
7 Tools & Kits
Tools & Kits ......................................................... 86
Compression & Crimpers ........................................... 86Strippers, Coring & Tip Holder ................................... 87
Page 86 Product Catalogue 2007
Compression Tools
Hills RG59/6 F type onlyBC71509
Hills RG11 onlyBC71442BP
ICM Double Bubble F onlyBC71673
ICM Double Bubble F, RCA & BNCBC72241
ICM F, RCA & BNCBC89202
ICM F onlyBC15145
Hills Compression Kit RG59/6 F, RCA & BNC(Connectors not included)BC71444
Tools & KitsCompression & Crimpers
Hex Crimpers
Hex Crimper RG59 / 6 / 11(Hex size: 0.360, 0.475 & 0.096)BC87007BP
Hex Crimp Kit RG59 / 6 / 11(Hex size: 0.360, 0.475 & 0.096)(20 RG6 F type Connectors included)BC88181
Tools and Kits 7
Product Catalogue 2007 Page 87
Tools & KitsStrippers, Coring & Tip Holder
Strippers
PSA 59/6/RGB StripperBC89128
RG59/6 CableB71588BP
Coaxial Stripper RG59/6BC15172BP
RG11 StripperBC15171
500 (1/2”) Jacket StripperBC15647
Coring Tools
500 (1/2”)BC15574
Tip Holder Kit
BC72257
Tools and Kits 7
8 Satellite Equipment
Satellite Equipment ............................................ 90Dishes & Sharp LNBF ................................................ 90Power Inserter ............................................................ 90Multiswitches - Standalone........................................ 91Multiswitches - Cascadable ....................................... 92Digital Satellite Decoder ............................................. 95
Page 90 Product Catalogue 2007
Dishes
65cm DishFF607000B
80cm DishFF607018A
Commercial Dishes
90cm Commercial DishBC3903
120cm Commercial DishBC3904
LNB’s
Single 10.7 GHz L.OBC49152
Twin 10.7 GHz L.OBC49153
Quad 10.7 GHz L.OBC49155
Single 11.3GHz L.OBC49151
Satellite EquipmentDishes & Sharp LNBF
Satellite EquipmentPower Inserter
Twin LNB Power Inserter
BC88213
KC88213 - Complete with power supply
Features
• Designed with low loss and high performance• High Ingress Retention• Easily mountable• Foxtel approved
Specifi cations
DC Pass DC IN -LNB B - 18V 300mA max.DC IN - LNB A - 13V 300mA max.
Power Supply 24Vdc 500mA
Foxtel Approval Number 10470
Satellite Equipment q pSa e e qu p e8
Product Catalogue 2007 Page 91
3 Inputs & 4 Outputs
BC89340
3 Inputs & 8 Outputs
BC89380
Features
• Compact and light weight• Earth attachment point• Output ports one sided• Digital & analogue compatible• Power through to LNB• Easy to install• European design
Specifi cations
Product Code BC89340 BC89380
3 x Inputs H / V / FTA H / V / FTA
Outputs Frequency Range FTA 4 45 -862MHz 8 45 -862MHz
Frequency Range IF 950 -2050MHz 950 -2050MHz
Insertion loss FTA 12dB 17dB
Insertion loss / Gain IF 0 +/-2dB 0 +/-2dB
Foxtel Approval Number F10467 F10549
Austar Approved Number A04788 A04789
2 Inputs & 4 Outputs
BC89067
2 Inputs & 8 Outputs
BC89066
Features
• Earth attachment point• Digital & analogue compatible• Power through to LNB• Easy to install• Pay TV Approved
Specifi cations
Product Code BC89067 BC89066
Inputs Horizontal / Vertical
Subscriber Connections 4 Ports 8 Ports
IF Frequency Range 950-2050 MHz
Through Loss @ 950 MHz 0dB ± 2dB
Through Loss @ 2050 MHz +5dB ± 2dB
Maximum IF Input Level 96dBuV@950MHz / 91DBuV#2050MHz
Maximum IF Output Level - IMA3 (DIN EN 50083-3)
98dBuV
Return Loss Inputs >10dB
Return Loss Outputs >10dB
Isolation Between h/V >25dB
Isolation Port to Port >25dB
Supply Voltage Via STU
Max. Current from Receiver 50mA + LNB
Max. Current Consumption 50mA
Max. Current to LNB 500mA
Control (Selection LNB Polarity) 14-16V
Temperature Range -20.....+60 ºC
Protection index IP20
Foxtel Aproval Number F10279
Satellite EquipmentMultiswitches - Standalone
Satellite Equipmentq pSa e e qu p e 8
Page 92 Product Catalogue 2007
5/8 MS - 18dB
BC71492
Specifi cations
Product Code BC71492 BC71493 BC71494 BC71495
Sat. Freq Range 950-2150MHz 950-2150MHz 950-2150MHz 950-2150MHz
Terr. Freq Range 40-860MHz 40-860MHz 40-860MHz 40-860MHz
Trunk Loss Sat/Terr 4/5dB 4/5dB 4/5dB N/A
Switch Loss 18dB@2150MHz 14dB@2150MHz 10dB@2150MHz 5dB@2150MHz
Satellite 22dB@950MHz 18dB@950MHz 14dB@950MHz 9dB@950MHz
Switch Loss 28dB@860MHz 23dB@860MHz 17dB@860MHz 12dB@860MHz
Terrestrial 30dB@40MHz 25dB@40MHz 19dB@40MHz 14dB@40MHz
5/8 MS - 14dB
BC71493
5/8 MS - 5dB
BC71495
5/8 MS - 10dB
BC71494
Features
• 5 Inputs & 8 Outputs• >35dB Isolation• 10dB Return Loss• 4dB Slope Equalisation to each output• Suitable for cascade or Star Type Systems• Foxtel approved
Satellite EquipmentMultiswitches - Cascadable
Satellite Equipment q pSa e e qu p e8
Product Catalogue 2007 Page 93
5 Way Launch Amplifi er
BC71496
Features
• High performance• Variable Gain to each Sat. Input• +4dB Slope• Max. Gain 24 dB Sat / 30dB Terrestrial• 10dB Return Loss• Foxtel approved
Specifi cations
Product Code BC71496
Sat. Freq Range 950-2150MHz
Terr. Freq Range 40-860MHz
Sat. Gain 24-28dB
Terr. Gain 28-30dB
Max OP Sat 110dBuV
Max OP Terr 105dBuV
5 Way Tap 10-20dB
BC71672
Features
• Highperformance• >10dB ReturnLoss• One switch for both Sat & Terrestrial Tap Value• Used for taping fl oor to fl oor• Foxtel approved
Specifi cations
Product Code BC71672
Sat. Freq Range 950-2050MHz
Terr. Freq Range 40-860MHz
Inputs / Outputs 5/5
Insertion Loss Selectable between 10,15 or 20dB
Through Loss Sat/Terr-5dB/4dB
Satellite EquipmentMultiswitches - Cascadable
Satellite Equipmentq pSa e e qu p e 8
Page 94 Product Catalogue 2007
5 In - 2 Way Splitter
BC71671
Features
• High performance• High Isolation• >10dB Return Loss• Used for splitting trunks• Foxtel approved
Specifi cations
Product Code BC71671
Sat. Freq Range 950-2050MHz
Terr. Freq Range 40-860MHz
Inputs / Outputs 5/5
Sat / Terr Insertion Loss 5dB / 4 dB
Satellite EquipmentMultiswitches - Cascadable
Power Supply
BC71497
Features
• Suitable for direct connection• Short circuit protection with auto recovery• Includes connector tool
Specifi cations
Product Code BC71497
AC Input 100-240V AC, 50-60Hz 0.3A
DC Output 15-16V, 0.75A Max
Adaptor F Male - F Male Quick (5 pk)
BC71622
Satellite Equipment q pSa e e qu p e8
Product Catalogue 2007 Page 95
Specifi cations
Product Code BC94163
System
Fully DVB-S and MPEG-2 compliant
Output signal PAL B/G/I
Tuner
Modulation QPSK
Inner FEC Automatic, 1/2 2/3, 3/4, 5/6, 7/8
Symbol rate 15 – 30 MS/s
Input frequency 950 – 2150 MH
LNB Control
Power Supply 13V/18V (Max. 350mA)
Polarization Control
13/18V (V/H) with 22KHz tone
Video
MPEG-2 Main Level @ Main Profi le
Data rate 1.5 – 15 Mbit/s
Formats 4:3, 16:9 with Pan & Scan
Graphics up to 720 x 576 pixels
Audio
MPEG-2 Layer I & II (Musician)
Mono, Dual Mono, Stereo, Joint Stereo
CA System
Irdeto Access
System Resources
Main Processor STi5518
Memory Flash 4 MBytes
SDRAM 8 MBytes
EEPROM 8 KBytes
Software
ADB Embedded Application
Front Panel
LEDs Display
5 LEDs Standby/On, Mail, Stereo, Radio, Remote
8 Buttons Power ( ), MENU, TV/RADIO, OK, CHANNEL
(Down/Up), VOLUME (Left/Right)
1 Universal Smart Card slot
Rear Panel Connectors
Single Composite Video (RCA
Stereo Audio – 2 x (L+R) (RCA)
Mono Audio (RCA
Single S-VHS Video output
Satellite Input (F type IEC 169-24, Female)
RF In (IEC 169-24, Female)
RF Output, Ch.21-69 (IEC 169-2, Male)
Power Cord with connector
RS-232 9-pin D-type connector
Remote Control
Standard ADB RCU
30-key RCU
2 x AAA 1.5V batteries
General Data
Color dark grey
Weight 2.5 kg (packed)
Operating Temperature
+50°C to 450°C
Relative Humidity 95% maximum
Supply Voltage 198-264V AC, 47-63 Hz
Power Consumption
13 Watt typical
Dimensions 250 x 205 x 55 mm
MTBF 100,000 hours
Satellite EquipmentDigital Satellite Decoder
Aurora IRD - BC94163
Optus Aurora Ready Irdeto Conditional Access Receiver / Decoder for Aurora Satellite service.
Smart Card - BC94158
Satellite Equipmentq pSa e e qu p e 8
9 Field Strength Meters
Meters ................................................................ 98Terrestrial Meter ......................................................... 98Terrestrial & Satelllite Meter ....................................... 100
Page 98 Product Catalogue 2007
Specifi cations
Analogue TV
• Frequency band: 44–870 MHz• Direct selection of: custom memory plan, program, channel, frequency, dc at RF IN, with front panel keyboard• Memorisation of: plan, program, channel, frequency, audio carrier, standard, freq. offset• Frequency resolution: 62.5 KHz• Input impedance: 75 ohm• Interchangeable input connector: “F” (“IEC” or “BNC” or “N” optional)• Power supply at RF IN: OFF, + 5 V (0.2 A)• Analogue measurement dynamic range at RF input: from 25 to 116 dBuV, from –35 to + 56 dBmV (selectable), with limit indication: level too low, level too high• Measurement resolution: 0.1 dB• Level measurement accuracy: 1.5 dB typ. (2 max) with SW correction (after 5 minutes warm–up)• Measurement filter bandwidth: 130 KHz at –3 dB• Measurement stability versus temperature between –10 and 50°C: 0.03 dB/°C• Multi–standard: M–N–B–G–I–D–K PAL–NTSC–SECAM.
FM Radio
• Frequency band: tuneable from 44 to 870 MHz (default 88–108)• Memorisation of: memory plan, programme, channel, frequency• Frequency resolution: 62.5 KHz• Audio demodulation: FM• Demodulation fi lter bandwidth: 100 KHz @ –3 dB. • Audio heard with built–in loudspeaker: 0.5 W adjustable volume
HT2 Terrestrial Meter
BC71895
MetersTerrestrial Meter
Field Strength Meters 9
Product Catalogue 2007 Page 99
COFDM Demodulated (Digital or analogue fully automatic selection also in channel navigation)
• COFDM frequency band: 44–870 MHz• Direct selection of: memory plan, programme, channel, frequency, dc at RF IN, with front panel keyboard• Memorisation of: memory plan, programme, channel, frequency, channel bandwidth, offset–frequency• Frequency resolution: 62.5 KHz• Offset frequency 166 KHz: automatic• Input impedance: 75 ohm• Interchangeable input connector: “F” (“IEC” or “BNC” or “N” optional)• Power supply at RF IN: OFF, +5 V (0.2 A)• Power measurement dynamic range at the RF input: from 30 to 120 dBuV, from –25 to + 60 dBmV (selectable) with limit indications: level too Low, level too high• Power measurement resolution: 0.1 dB• Power measurement accuracy: 1.5 dB typ. (2 dB max.) with software correction (after 5 minutes’ warm-up)• MER & SNR measurement accuracy: 1 dB typ. (1.5 dB max), with > 45 dBuV power• Measurement fi lter BW: 130 KHz at –3 dB• Measurement stability versus temperature between –10 and 50°C: 0.03 dB/°C• Noise Margin Measurement accuracy: 0.5 dB• BER measurement before and after Viterbi: - bBER up to 2 x 10-5 (Pre BER) - aBER up to 2 x 10-8 (Post BER)• Automatic recognition & visualisation of: HP/LP rate, guard interval, constellation - Rate: 1/2, 2/3, 3/4, 5/6, 7/8 - Guard interval: 1/4, 1/8, 1/16, 1/32 - Constellation: QPSK, 16 QAM, 64 QAM • Automatic Digital signal quality TEST on channel: PASS–MARG–FAIL• Spectrum inversion: automatic
TV Spectrum Analysis
• Frequency band: 44–870MHz• Span in TV band: 2–5–7–10–20–50–100– 200–500–FULL• dB/div: 10• Dynamic range on the display: 60 dB• MRK Measurement resolution: 0.1 dB• Measurement filter bandwidth: TV 130 KHz at –3 dB• Reference level: from 0 to 120 dBµV, from –50 dBmV to +70 dBmV• Reference level setting: automatic, and manual adjustable• Frequency/level marker position: - For digital signals in channel centre - For analogue signals on video carrier• Other spectrum selections: - MAX HOLD
MetersTerrestrial Meter
Field Strength Meters 9
Page 100 Product Catalogue 2007
Specifi cations
Analogue SAT
• Frequency Band: 930–2250 MHz• Direct selection of: memory plan, programme, frequency, LNB, DiSEqC, with front panel key board• Memorization of: plan, programme, transponder, frequency, LNB, DiSEqC, local oscillator frequency• Frequency resolution: 0,1 MHz• Input impedance: 75 ohm• Interchangeable input connector: “F” (“IEC” or “BNC” or “N” optional)• Power Supply at RF input: OFF, +13, +18 V, 22 kHz (0,3 A) (with ON/OFF key)• DiSEqC 1,1: 4, 8, 12 or 16 polarizations, DiSEqC “a.b.c.d” already pre-programmed in sequence and very easy to use. IT can power any type of LNB (analogue or DiSEqC, single or dual feed) and any type of multiswitch (analogue or DiSEqC on 4, 8, 12, 16 inputs and SCR LNB)• Analogue level measurement dynamic range at the RF input: from 35 to 120 dBuV, from –25 to + 60 dBmV (selectable) with limit indications: level Too Low, level Too High• Measurement resolution: 0,1 dB• Level measurement accuracy: 1.5 dB typ. (2.5 dB max.) with software correction (after 5 minutes warm-up)• Measurement filter bandwidth in SAT mode: 4 MHz at –3 dB• Measurement stability versus temperature between –10 and 50°C: 0,1 dB/°C• LNB L.O. freq selection: continuous from 0 to 20.000 MHz, for “L” band (direct IF–SAT reading), “S”, “C”, “KU”, “KA”.
QPSK Demodulated (Digital or analogue fully automatic selection also in channel navigation)
• Frequency band: 930–2250 MHz• Direct selection of: memory plan, programme, frequency, LNB, DiSEqC, with front panel key- board• Memorization of: plan, programme, transponder, frequency, LNB, DiSEqC, local oscillator freq, standard, symbol rate• Frequency resolution: 0,1 MHz• Input impedance: 75 ohm• Interchangeable input connector: “F” (“IEC” or “BNC” or “N” optional)• Power Supply at RF input: OFF, +13, +18 V, 22 kHz (0,3 A) (with ON/OFF key)• DiSEqC 1,1: 4, 8, 12 or 16 polarizations, DiSEqC “a.b.c.d” already pre-programmed in sequence and very easy to use. It can power any type of LNB (analog or DiSEqC, single or dual feed) and any type of multiswitch (analogue or DiSEqC with 4, 8, 12, 16 inputs and SCR LNB)• Digital power measurement dynamic range at RF input: from 35 to 120 typ. dBuV, from –30 to + 60 dBmV (selectable) with limit indications: level Too Low, level Too High• Power Measurement Resolution: 0,1 dB• Power Measurement accuracy: 1,5 dB typ. (2.5 dB max.) with software correction (after 5 minutes warm up)• Noise Margin Measurement accuracy: 0,5 dB typ. (1 dB max) with software correction
HST2 Terrestrial & Satellite Meter
BC72140
MetersTerrestrial & Satellite Meter
Field Strength Meters 9
Product Catalogue 2007 Page 101
• Measurement filter bandwidth in SAT mode: 4 MHz at –3 dB• Measurement stability versus temperature between –10 and 50°C: 0,1 dB/°C• QPSK Symbol Rate setting: 2–45 MS/s, in 1 kS/s steps• BER measurement before and after Viterbi: - bBER up to 2x10–5 (Pre BER) - aBER up to 2x10–8 (Post BER)• FEC, automatic recognition and visualizaton of value: FEC 1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9• Automatic quality test: FAIL, MARGINAL, PASS• Noise Margin Measurements: from –1 to 12 dB with special algorithm which automatically takes into account the FEC value• LNB L.O. freq selection: continuous from 0 to 20.000 MHz, for “L” bands (direct IF–SAT reading), “S”, “C”, “KU”, “KA”.• QPSK standard selection: DVB/DSS
NET. ID. and MPEG Service/Programme list
• Provides the name of the programmes (Services) the bouquet and transponder names the encryption system, orbitall position and date.
SAT Spectrum Analysis
• Frequency band: 930–2250 MHz• Span: 50–100–200–500–FULL• dB/div: 5• Display dynamic range: >30 dB• Marker measurement resolution: 0.1 dB• Measurement filter bandwidth: 4 MHz at –3 dB• Reference level: from 0 to 120 dBµV, from –60 dBmV to +60 dBmV• Reference level settings: automatic and manual adjustable• Other selectable spectrum modes: - MAX HOLD (peak hold) - SAT POINTING: automatic optimum setting for satellite dish alignment
Others
• Buzzer: Level or Quality according to measurement mode (with on/off Key)• Power Supply: - Built in rechargeable batteries: 7,2 V x 2,5 Ah (Ni–MH) - Voltage load: 12 Vca or 12 Vcc (1 A), (connector: Ø 5,5 x 2,2) - AC/AC adapter : 230 Vac, output: 12 Vac (supplied)• Battery duration at 25°C: 4 hours depending on LNB consumption (9 hours optional)• Low Battery indicator: with acoustic signalling and visual indication on graphic display and automatic meter power down • Indication of battery status always shown on display• Battery recharge time: 1 hour for approx 50% capacity, 3/6 hours for full charge• Instrument size: H 80 x L 225 x D 215 mm• Instrument weight: 1.3 kg with batteries, bag and accessories• Casing structure: ABS plastic housing rain-dust and shock proof• USB interface: for PC interfacing; SW up-grades, (memory plan configuration, printouts etc. optional Smart Pro S/W)• B/W graphic display: 64 x 128 pixel• Auto-Off timer: after 5 or 10 min without use (selectable on/off, always re-starts from last function)• RF input overload protection: electronic, up to 60 Vac
MetersTerrestrial & Satellite Meter
Field Strength Meters 9
10 Blister Accessories
Blister Packs ..................................................... 104Engineered For Digital ................................................ 104Standard .................................................................... 107
Page 104 Product Catalogue 2007
Product Name Units Part Number
RG59 F type Crimp Connectors 10 BC2090BP
RG59 F type Twist On Connector 6 BC88095BP
RG6 F type Crimp Connector 10 BC2092BP
RG6 F type Twist Connector 6 BC14302BP
Coax Adaptor F type Female / Female 5 BC15177BP
Coax Adaptor F type Female / Pal Male 5 BC3718BP
Coax Adaptor F type Female / Pal Female 5 BC15298BP
Coax Adaptor F type Male / Pal Female 5 BC5728BP
Blister PacksEngineered For Digital
Blister Accessories 10
Product Catalogue 2007 Page 105
Product Name Units Part Number
2 way Splitter F type 1 BC15173BP
3 way Splitter F type 1 BC15167BP
4 way Splitter F type 1 BC15470BP
6 way Splitter F type 1 BC15252BP
8 way Splitter F type 1 BC15253BP
Balun Barrel F type 1 BC3607BP
Flylead RG59 Quad 1.5m F type / Pal male 1 BC86837BP
3RCA - 3RCA lead 2 metres 1 BC15249BP
Blister PacksEngineered For Digital
Blister Accessories 10
Page 106 Product Catalogue 2007
Product Name Units Part Number
Diplexer UHF / VHF F type 1 BC44022BP
Skirting Outlet F type 1 BC86921BP
Wall Outlet F type 1 BC86819BP
Hex Crimper RG59/6/11(Hex size: 0.360, 0.475, 0.096)
1 BC87007BP
Compression Tool RG11 F type 1 BC71442BP
Coaxial Stripper RG59/6 1 BC15172BP
Adjustable RG59/6 Coaxial Stripper 1 BC71588BP
Blister PacksEngineered For Digital
Blister Accessories 10
Product Catalogue 2007 Page 107
Product Name Units Part Number
Flylead 1.5m Male / Female 1 BC3608BP
Flylead 4 m Male / Male 1 BC3626BP
Flylead 1.5m Male / Male 1 BC3610BP
2 way Splitter Plug type 1 BC3658BP
2 way Splitter Saddle type 1 BC3620BP
4 way Splitter Saddle type 1 BC3622BP
Diplexer UHF / VHF Saddle type 1 BC3624BP
FM Trap Indoor type 1 BC44264BP
Blister PacksStandard
Blister Accessories 10
Page 108 Product Catalogue 2007
Product Name Units Part Number
Coaxial Pal Joiner Female / Female 2 BC3618BP
Coaxial Pal Plug 2 BC3614BP
Coaxial Pal Socket 2 BC3616BP
Balun Adaptor 1 BC3604BP
Balun TV Set 1 BC3602BP
Balun Outdoor Antenna 1 BC3606BP
2 way Splitter TV Outlet type 1 BC3634BP
Skirting Board Outlet Saddle type 1 BC3612BP
Blister PacksStandard
Blister Accessories 10
Product Catalogue 2007 Page 109
Product Name Units Part Number
Single Wall Outlet Saddle type 1 BC86811BP
Antenna VHF / UHF Indoor 1 BC3640BP
VHF / UHF Indoor Rabbit Ears 1 BC89504BP
Blister PacksStandard
Blister Accessories 10
11 CableReady Ducting
CableReady Ducting ........................................ 112
Page 112 Product Catalogue 2007
CableReady Ducting 11
Now you see it – Now you don’t
CABLEREADY protective molding system protects cables from vandalism and the elements on commercial and residential buildings. Our patented system exceeds industry standards, and is also cost-effective.
The durable molding is custom painted, 26 gauge, hot dipped galvalume® steel. CABLEREADY is also backed by an exclusive 15-year warranty for added protection.
The CABLEREADY molding system is easy to install. An 8 foot section requires only four anchors, two clips and just a few minutes to install.
All fi ttings are designed to fi t snugly on the molding making access to the protected cables extremely diffi cult without the patented CABLEREADY entry key. And re-entry with our special key takes only 20 seconds per 8 foot length.
Molding is available in three colours, four sizes and with transitions between sizes. CABLEREADY molding has a greater cable capacity (40 RG6 cable drops in the two inch molding) and costs less per cable.
Now you see it – durable, cost effective protection
Now you don’t – choice of 4 colours (Redwood, Brown, White, and Ivory) to blend into background
T Shape Corner Straight
Brown Brown Brown
Ivory Ivory Ivory
Redwood Redwood Redwood
White White White
CableReady DuctingCableready Ducting
Product Catalogue 2007 Page 113
CableReady Ducting 11
Features
• 15 year warranty • Class “A” Fire Rating • Greater Cable Capacity • Permanent Installation • Four Colours (Redwood, Brown, White, Ivory) and four sizes• 26 Gauge Galvalume • For Interior or Exterior
Easy Installation
1. Drill 2. Attached Clip 3. Attached Cable 4. Snap on molding 5. Re-entry
CableReady DuctingCableready Ducting
12 Hills Home Hub
Hills Home Hub ................................................ 116
Page 116 Product Catalogue 2007
Hills Home HubHills Home Hub
Hills Home Hub 12
Build a home that’s wired for technology
Anyone considering building a new house will have heard someone mention
structured cabling or smart wiring, and how important it is to be able to use
the technologies available to us, and be prepared for those that are just around
the corner.
So what are they actually talking about?
The Hills Home Hub delivers and distributes data, phone, video, audio and TV
signals using the latest in data and TV cables from a centrally located enclosure
to specially configured wall outlets in any room of your choice. Structured
cabling using the Hills Home Hub is preferably planned at the same time as
your electrical wiring. The central enclosure is home to the devices that enable
the delivery and distribution of these signals. It also houses
the security system central controller.** An ideal location for the central enclosure
is a garage or utility room.
It is important to plan in which rooms you would like to access data, phone,
video, audio and TV. This planning is important to you now and to future
owners of your home because it adds flexibility and value. The use of a room
could change over time. A nursery now will become a teenager's bedroom,
and possibly a study or home office in the future. In order to access or share
these signals, cables along with wall outlets, containing standard data and TV
entertainment points need to be installed.
Structured cabling with the
Future Planning
Product Catalogue 2007 Page 117
Hills Home HubHills Home Hub
Hills Home Hub 12
Supervise your children as they play in the back yard while you're
preparing lunch. The video picture is sent from the outdoor security
camera via the Hills Home Hub cables, through the central enclosure
to a selected television in any room of your home, so your children
can continue playing safely, even when you are not physically there
to watch them.
Video Distribution
With the Hills Home Hub, you don't have to leave what you're doing
to answer the security gate or front door when the buzzer is pressed.
Simply pick up the remote to select the television channel
programmed for the front gate camera and see who's there. A phone
system with intercom and gate release features can then be used
to send a signal via the Hills Home Hub cables, through the central
enclosure, to release the electric latch on the gate and invite your
guests in. Using the phone system as an intercom, speak to a family
member in another room to tell them their friends have arrived.
Anyone can access the internet via a centralised server modem to
surf the net from any computer in the home. A web page like
www.hillshomehub.com.au can be selected to print. The signal
travels via the Hills Home Hub cables, through the central enclosure,
and the page you have selected will be waiting for you at the
printer in your home office.
Keep all your video equipment in the one location with the Hills smart
entertainment system and enjoy multi-room viewing and
controlling of your DVD, pay TV and VCR on any television in your
home. Once you have selected the pre-programmed channel for your
DVD player, use your remote control to activate the PLAY function.
The infrared signal travels via the Hills Home Hub cables, through
the central enclosure, through the Hills modulator, to the DVD player
in your entertainment area. The DVD will then send the movie back
to the TV that you're watching. The Hills smart entertainment system
allows you to control the functions of your VCR, DVD, or pay TV
remotely, in any room where there's a TV.
Enjoy superior stereo sound in any room of your home with the Hills
Home Music wall or ceiling mounted speakers. A CD player in your
home entertainment area sends music signals via the Hills Home
Hub cables, through the central enclosure to the rooms in which the
speakers are located. Set the volume level independently in each
room using the volume control.
Distributed Music
Multi-Room Entertainment
Computer Network
Phone & Intercom
13 Technical Information
Techical Information ......................................... 120
Page 120 Product Catalogue 2007
Techical Information
Technical Information 13
Digital Terrestrial Television Broadcasting (DTTB) is transmitted using digital modulation in the channels available in Bands III, IV and V, sharing the spectrum with the current analogue transmissions. Unlike analogue transmissions there will be no Band I or II transmissions for DTTB.
The existing transmitter sites are used for DTTB transmissions. The fi ve major capitals cities such as Sydney, Melbourne, Brisbane, Adelaide and Perth broadcast the commercial stations and the ABC service on Band III VHF while the SBS DTTB service use Band IV. Whereas other regional areas of Australia will mainly use UHF Bands IV and V. Analogue TV service is scheduled to commence turning off from 2010.
Although successful reception via current antennas will normally be experienced, optimum and robust reception of DTTB may require some modifi cations. The use of the guidelines contained herein and other like documents will help to ensure the domestic antenna installations provide reliable reception supporting the success of DTTB.
Digital vs. AnalogueDTTB can:
• Offer better reception of TV services than the analogue system;
• Deliver higher quality picture and sound than analogue, it has no effects of ghosting or distorted pictures;
• Offer enhanced features such as closed captions, electronic program guides, and data services and even selected radio services.
Benefi ts of DTTBWidescreen Television PictureWidescreen is a television picture format that allows television networks to broadcast television programs that offer a more natural, panorama view compared to the earlier formats. Widescreen sometimes known as “16:9”, this refers to the aspect ratio (the ratio of width to height) of a widescreen picture.Most new Australian program, especially sport events and overseas sourced programs are now produced for widescreen formats.
SDTVStandard defi nition is the current television display resolution as analogue television and DVDs; it supports both 4:3 and 16:9 widescreen. To receive digital signals, most TVs require installing a separate digital Set-top-box. However, some TV with build-in digital tuners, so do not require an external Set-top-box.
HDTVHigh defi nition is the enhanced of SDTV; at the moment each broadcaster is broadcasting 20 hours of HDTV per week. All HD programs are produced and shown in widescreen formats.
It has the highest TV picture quality available; the resolution can be up to 3 times of SDTV. It is particularly suited to large screen TV displays. It can offer a 5.1 surround sound where this sound track is available.
Display Resolutions
Type Resolution Total Pixels
High Defi nition 1080i: 1920 x 1080 x 3 = 6,220,800
High Defi nition 720p: 1280 x 720 x 3 = 2,764,800
High Defi nition 576p: 720 x 576 x 3 = 1,244,160
Standard Defi nition 576i: 720 x 576 x 3 = 1,244,160
The resolution type SD 576i is the almost the same as traditional CRT TV. (575i) while it is the same as DVD resolution. There are three different HDTV standards in Australia. The lowest is 576p; the next is 720p Quasi. The highest resolution standard is 1080i, which has a resolution of 1920 x 1080 and is in ‘interlaced’ mode.To watch HD pictures, not only HD Set-top-box is needed, but also a HD resolution display is also required.
The Digital SignalThe ‘digital’ signal used for DTTB is very different to the familiar PAL analogue signal, hence some understanding of the differences by the installer and technician will aid in a quality installation and the explanation to others, including the consumer.
DTTB utilises a form of modulation called COFDM (Coded Orthogonal Frequency Division Multiplex) and is defi ned by DVB – T standards. The purpose of COFDM is to provide a vehicle for the carriage of the digital signal that is highly robust to the effects of echoes or ghosts that are created from multiple paths from the transmitter to the receive antenna.
The ‘magic’ of the COFDM has its origin from spreading the data between many carriers. Either of two modes of COFDM maybe employed, with the ‘2K mode’ having 1705 carriers and the ‘8K mode’ having 6817 carriers. Australia uses the 8K mode, hence the power is spread evenly over the 6.7MHz portion of the 7MHz channel, in contrast to an analogue service with its concentration of power in the vision carrier at the lower end of the spectrum.
The difference in power distribution has important consequences of the measurement of signal level, as covered later in measurements.
Fig. 1: Analogue and Digital Signal Spectrum
Product Catalogue 2007 Page 121
Technical Information 13
The Digital Cliff EdgeUnlike analogue TV signals, which can be viewed down to weak signal strengths or in corrupted conditions, DTTB TV signal’s pictures and sound will either be perfect, or in the process of breaking up or non-existent. The penalty for the potential of obtaining perfect pictures and sound all the time is that DTTB reception exhibits a very rapid change from being excellent to disappearing. This phenomenon in general is referred to as digital cliff edge or threshold.
Fig. 2: Picture and Sound Quality Versus Signal Strength
The recommended minimum level margin is 9dB (typically ≥ 15dB with preferred >20dB) for the fi rst level of caution to cater for short and long-term variations.
The cliff edge characteristic of digital reception invites the defi nition of a margin the signal has to achieve before this failure level or cliff edge is reached. By the insertion of an attenuator in the input of the receiver or the system’s amplifi er, the level margin may be found.
Importantly all the channels expected to be received must be received reliably. Hence the level margin must be checked on all channels. Further quality checking must be assessed also on all channels.
Page 122 Product Catalogue 2007
Technical Information 13
Signal Measurements for DTTB
Signal LevelThe measurement of the signal level sometimes referred to as channel power, delivered to the input of the receiver will be the initial easy check on the suitability of the installation. The levels recommended below have allowances to cater for the requirements of reception in Band III, IV and V in most environments experienced in city and rural locations.
With the experience in analogue reception of 66dBµV and C/N >45dB as an aim for a successful analogue installation the equivalent for digital TV reception is 66dBµV and SNR >32dB as a rule of thumb for a successful digital installation. For satellite installation the parameters are 63dBµV and MER>12B.
The signal level required at the input of any active headend equipment or amplifi er shall be no less than 75dBµV and the recommended output level or launch level should be no higher then 105dBµV.
DTTB is not a solution to very low-level poor analogue reception. Since the Digital service is transmitted 6dB below the analogue, low analogue levels would result in lower digital level and unacceptable levels for amplifi cation. Digital reception is ideal for improving poor analogue reception such as ghosting and general interferences. To achieve this however, the Digital signal level needs to be maintaining at a reasonable level at all times.
Modulation Error Ratio (MER)MER is a parameter that measures the phase shift error of the RF signal in the modulation and demodulation of the digital content.
Fig. 3 Basic MER Vector Diagram
It is the sum of the squares of the magnitudes of the ideal symbols vectors and divided by the sum of the squares of the symbol error vectors. The result is expressed as a power ratio in dB.
( )dBe
AMER
i
i2
2
log10∑∑=
When measuring digital signals the MER should be one of the main parameters to be measured. Terrestrial MER >32dB
The reason for this measurement rather than measuring BER, is that BER can be infl uenced by the forward error correction method incorporated in the digital demodulator. While MER has the advantage that this measurement is before forward error correction, so it gives us a better idea of how the signal and hence how the installation is performing.
Poor MER affects the picture quality right from the beginning to complete failure.
MER = 10 log (dB)
Product Catalogue 2007 Page 123
Technical Information 13
Bit Error Ratio (BER)BER is a measurement of signal quality after conversion of the ‘RF’ to data. This data determines whether converted pictures and sound can be received uncorrupted. Errors in the data, or bit errors, can be tolerated up to a particular level without an effect on pictures or sound due to the techniques employed which are simply called error correction.
The DTTB transmission and reception path employs built-in error correction techniques collectively called forward error correction (FEC). In the receiver, error correction takes place in two distinct stages called inner (or Viterbi) and outer (or Reed – Solomon) decoding. There maybe a choice in the measuring instrument at what position to measure the BER. The measurement of BER before Viterbi or ‘Pre – Viterbi’ error correction is used on high quality signals, for example, on Cable and Satellite TV reception. For the more complex and corrupted Terrestrial reception, BER measurement after Viterbi or ‘Post – Viterbi’ should be monitored.
A Post – Viterbi BER of worse than ‘2E-4’ will exceed the ability of the Reed – Solomon error correction and may result in picture and sound corruption. To provide for a suffi ciently robust reception, a Post – Viterbi BER of better than ‘2E-6’ is required at the input and output of the amplifi ers.
Post – Viterbi
BER
@ Cliff Edge
Minimum Preferred
2E-4 2E-6 < 2E-7
Operating MarginsAlong with the level margins a further equally important quality margin is required to provided a reliable digital services. By the measurement of Post – Viterbi BER, the quality margin can be judged. To provide the level of this margin in relation with BER, knowledge of a parameter called MER is helpful. MER or Modulation Error Ratio is a single fi gure of merit for the in band quality that includes the noise, inter-modulation and other corruptions of the signal. MER is a very near equivalent of in band S/N. At the cliff edge or at the threshold C/N point, the MER equals this threshold value, being approximately 20dB for modulation of 64QAM with a FEC of 2/3 or 3/4. The Post – Viterbi BER at this level will be approximately 2E-4, with a consequential margin at the threshold of 0dB. With, for example, a BER of 2E-6, the MER maybe around 22dB, results in a 2dB quality margin. The relationship between BER and MER changes with the complexity of the signal, hence Fig. 3 can only be taken as a guide.
Fig. 4: signal Quality
Carrier to Noise Ratio (C/N)The C/N ratio is defi ned as the ratio between the vision carrier signal level and the RMS noise level.
The carrier to noise ratio for any analogue channel shall not be less than 45dB at any point in the system.
The carrier to noise ratio or SNR (signal to noise) for any digital channel shall not be less than 32dB at any point in the system.
Page 124 Product Catalogue 2007
Technical Information 13
Amplifi ersMasthead Amplifi erThe best possible signal quality is straight off the antenna, once the signal leaves this point the signal gets degraded by system losses. Hence, after obtaining the best possible signal from the best possible antenna we need to work out the system loss and determine if an amplifi er is required to overcome this system loss. The maximum gain of an amplifi er should not be more than 10dB greater than the system loss.
If the signal level measured from the antenna is less than 60dBµV, a masthead amplifi er such as the Hills LNDA or Q – Amp is recommended. Masthead amplifi ers usually have a gain of 20 - 34dB, have a low noise fi gure and are capable of accepting a minimum level of not be less than 45dBµV.
Distribution Amplifi erDistribution amplifi ers are used to increase the signal level from an antenna and extend it to a multiple outlet network. Hence the main difference between a masthead and a distribution amplifi er is the location of the amplifi er in the system, the input working levels, noise fi gures and output launch levels.
If signal level is above 70dBµV before requiring splitting the signal then a distribution amplifi er is recommended. However, if the signal level drops below 70dBµV before the splitter it would be advisable to use a masthead amplifi er. The gain of the distribution amplifi er is chosen depending upon the system loss of the network from amplifi er to outlet plate.
Reduction of maximum output level of amplifi ers (derating)All amplifi ers are rated with a maximum output level in relation to the number of allowable channels the amplifi er was tested with. This is referred to as the amplifi ers’ channel loading ability. An earlier specifi cation for amplifi ers was known as DIN45004B.
This specifi cation will show the maximum output level with a loading of two channels only. However, many commercial grade amplifi ers will show the output level specifi cation using the Cenelec 50083 standard with a 42 channel loading capacity in line with European and new Australian standards. If an amplifi er specifi cation only shows a 2-channel loading in its load chart then we can use a de-rating graph to work out the calculation for derating an amplifi er for 42 channels.
This fi gure will allow you to determine out the maximum output level the amplifi er can be set to. Most well designed systems can have more channels added without any adjustments to the amplifi ers. This is because the system was designed with amplifi ers already de-rated to more than the current number of channels been distributed in the network. Most amplifi er output levels are now rated at “42 Channel” operation. As we increase the number of distributed channels we must decrease the output in dB according to the fi gure below to maintain distortion products at minus 60dB.
Fig. 5 Derating of amplifi ers
Example:The Polytron amplifi er HA40125N has a rated output of 125dBµV @ 2 channels.
Therefore the new output level when loaded with 32 channels will be 113dBµV. De-rating factor is 12dB.
1
2
3
4
5
6
7
8
9
10
11
12
1310 20 30 40
DeratingOutputLevel
Number of Distributed Channels
MAXIMUM OUTPUT DERATING CHART
Product Catalogue 2007 Page 125
Technical Information 13
Concept Headend Set-ups
Polytron SPM1000 Digi Series
Televes MATV Headend
Page 126 Product Catalogue 2007
Technical Information 13
Concept SMATV Design
Terrestrial frequency is 860MHz.Satellite frequency is 2050MHz.All system devices are earth connected to CET.
Product Catalogue 2007 Page 127
Technical Information 13
Australian Channel Plan
Band ChannelAnalogue Frequency
Digital Frequency
Mid Band & Hyper Band
Analogue Frequency
Digital Frequency
VHF Band I 0 46.25 -
1 57.25 -
2 64.25 -
VHF Band II 2a 71.25 -
2b 78.25 -
3 86.25 -
4 95.25 -
5 102.25 - S2 112.25 -
5A 138.25 - S3 119.25 -
S4 126.25 -
S5 133.25 -
S6 140.25 - S7 147.25 - S8 154.25 - S9 161.25 -
S10 168.25 -
VHF Band III 6 175.25 177.500 7 182.25 184.500
8 189.25 191.500 9 196.25 198.500 9a 203.25 205.500 10 209.25 212.500 11 216.25 219.500 12 224.25 226.500 S11 231.25 233.500 S12 238.25 240.500 S13 245.25 247.500 S14 252.25 254.500 S15 259.25 261.500 S16 266.25 268.500 S17 273.25 275.500 S18 280.25 282.500 S19 287.25 289.500 S20 294.25 296.500 S21 303.25 305.500 S22 310.25 312.500 S23 317.25 319.500 S24 324.25 326.500 S25 331.25 333.500 S26 338.25 340.500 S27 345.25 347.500 S28 352.25 354.500 S29 359.25 361.500 S30 366.25 368.500 S31 373.25 375.500
S32 380.25 382.500
Page 128 Product Catalogue 2007
Technical Information 13
Australian Channel Plan
Band ChannelAnalogue Frequency
Digital Frequency
Mid Band & Hyper Band
Analogue Frequency
Digital Frequency
S33 387.25 389.500 S34 394.25 396.500 S35 401.25 403.500 S36 408.25 410.500 S37 415.25 417.500 S38 422.25 424.500 S39 429.25 431.500 S40 436.25 438.500 S41 443.25 445.500 S42 450.25 452.500 S43 457.25 459.500 S44 464.25 466.500
S45 471.25 473.500
UHF Band IV 21 478.25 480.500 22 485.25 487.500 23 492.25 494.500 24 499.25 501.500 25 506.25 508.500 26 513.25 515.500 27 520.25 522.500 28 527.25 529.500 29 534.25 536.500 30 541.25 543.500 31 548.25 550.500 32 555.25 557.500 33 562.25 564.500 34 569.25 571.500 35 576.25 578.500 36 583.25 585.500
37 590.25 592.500
UHF Band V 38 597.25 599.500 39 604.25 606.500
40 611.25 613.500 41 618.25 620.500 42 625.25 627.500 43 632.25 634.500 44 639.25 641.500 45 646.25 648.500 46 653.25 655.500 47 660.25 662.500 48 667.25 669.500 49 674.25 676.500 50 681.25 683.500 51 688.25 690.500 52 695.25 697.500 53 702.25 704.500 54 709.25 711.500
Product Catalogue 2007 Page 129
Technical Information 13
Australian Channel Plan
Band V ChannelAnalogue Frequency
Digital Frequency
55 716.25 718.500 56 723.25 725.500 57 730.25 732.500 58 737.25 739.500 59 744.25 746.500 60 751.25 753.500 61 758.25 760.500 62 765.25 767.500 63 772.25 774.500 64 779.25 781.500 65 786.25 788.500 66 793.25 795.500 67 800.25 802.500 68 807.25 809.500
69 814.25 816.500 70 821.25 823.500 71 828.25 830.500 72 835.25 837.500 73 842.25 844.500 74 849.25 851.500 75 856.25 858.500
Reference:
http://www.aba.gov.au/
http://www.dba.org.au/
http://www.televes.com/
Hills Industries reserves the right , without prior notice, to discontinue any products or design changes as part of Hills continuous product improvement.
The information contained in this catalogue is believed to be correct at the time of publication. Hills Industries Limited will not accept any responsibility for damage, injury, loss of expense resulting from any error or omission.
Notes
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
Branch locations across Australia
New South WalesRiverwood 12 Wiggs Road, NSW 2210 Ph: (02) 9717 5290 Fax: (02) 9717 5226
Castle Hill 22 Hudson Avenue, NSW 2154 Ph: (02) 9894 9444 Fax: (02) 9894 9567 Victoria Keysborough Cnr Cambria & Bridge Road, VIC 3173 Ph: (03) 9238 2533 Fax: (03) 9238 2535
Tasmania Derwent Park Unit 3, 227 Main Road, TAS 7009 Ph: (03) 6273 9973 Fax: (03) 9238 2535 Western AustraliaMalaga 448 Victoria Road, WA 6090 Ph: (08) 9209 7000 Fax: (08) 9209 7044
Queensland Acacia Ridge 69 Activity Street, QLD 4110 Ph: (07) 3344 3855 Fax: (07) 3344 4866
Arundel 1/20 Gibbs Street, QLD 4110 Ph: (07) 5500 7222 Fax: (07) 5500 7244
South Australia Edwardstown 20 Raglan Avenue, SA 5039 Ph: (08) 8371 0277 Fax: (08) 8371 1519
Export SalesEdwardstown 20 Raglan Avenue, SA 5039 Ph: (08) 8371 3663 Fax: (08) 8371 1519
www.hillsantenna.com.au