Date post: | 21-Dec-2018 |
Category: |
Documents |
Upload: | truongdiep |
View: | 227 times |
Download: | 0 times |
www.compwest.com
HHiippoott TTee
tteesstteerrss
HHTT--2255KKVVPP ddcc
DIELECTRIC WITHSTAND
Model HT-25KVP dc is a 25,000Vdc
Features
• DC output: up to 25,000 V.
• Microcontroller Technology, one button test,
easy to setup, LED's indicate test progress.
Upon failure, buzzer sounds and testing is
terminated.
• Leakage current limit, voltage ramp
and test duration are controlled from the
rear panel.
• Voltage ramp, arc detection and test timer
are defeatable.
• Separate arc detection circuitry
(800) 748-6224
eesstteerrss // rreesseeaarrcchh
FFAASSTT
SSAAFFEE
DIELECTRIC WITHSTAND [HIPOT] TESTER
,000Vdc hipot tester, built with microcontroller technology.
,000 V.
Microcontroller Technology, one button test,
easy to setup, LED's indicate test progress.
Upon failure, buzzer sounds and testing is
eakage current limit, voltage ramp-up time
ion are controlled from the
Voltage ramp, arc detection and test timer
Separate arc detection circuitry.
• Ergonomically designed for safety,
speed and efficiency.
• Designed for product development,
production and laboratory use.
• Cables, manual and calibration
certificate included.
• One year calibration cycle.
• One year warranty.
RREELLIIAABBLLEE
nology.
Ergonomically designed for safety,
Designed for product development,
and laboratory use.
ables, manual and calibration
One year calibration cycle.
650 Gateway Center Way, Suite D. San Diego, CA 92102 USA
Toll Free: (800) 748-6224 Phone:
HHTT--2255KKVVPP ddcc
Specifications
Voltage Test Type: Maximum Output Voltage: Maximum Leakage Current: Input Voltage:
Frequency: Fuse: Breakdown Detect:
Transformer Power: Leakage Current Detect:
Ramp Time Range:
Test Time Range:
Displays:
Voltage Meter Accuracy:
Duty Cycle:
Operation Temperature:
Relative Humidity Range:
General
Dimensions:
Weight:
Product Package:
Options
(XI) Safety Interlock:
(VF) Voltage on Failure:
(AR) Auto Reset on Pass:
(RI) Relay Isolated Remote Interface:
Safety
Visual Indicator of Voltage Output:
Failure Indicator:
650 Gateway Center Way, Suite D. San Diego, CA 92102 USA
6224 Phone: (619) 878-9696
FFAASSTT
SSAAFFEE
DC Maximum Output Voltage: 0 - 25,000 Vdc Maximum Leakage Current: 5mA @ 18KVdc, 1mA @ 25kVdc
120 V *optional different line voltages available (100V, 110V, 220V, 230V, 240V)
50/60 Hz 120/230 VAC 2 A Slow Blow Independent High Frequency Circuit
< 500 VAC Independent Low Frequency Circuit
1 - 5 Seconds
1 - 60 seconds
4 Digits LED Display
± 0.2KV Full Scale
100 %
15 - 40 °C
0 - 90 % Non-Condensing
17” Wide x 5.5” High x 17” Deep
28 lbs
HT-25KVP dc
HT-25KVP dc Product Manual
18 AWG 4 feet Test Lead (Black)
18 AWG 4 feet High Voltage Test Lead (Red)
NIST Traceable Calibration Certificate to MIL-STD45662
Two position terminal block on rear panel must be shorted for high voltage operation. If a failure stops the test, the front voltage display will hold the last voltage reading. Resets the HT-25KVP dc after a few seconds only on passing test condition.
Isolated Remote It allows the interface with a PLC or other machine using relay closures. This option allows isolation between the PLC and the Hipot tester.
Visual Indicator of Voltage Provided by front panel meter, directly connected to high voltage output.
Audible, provided by buzzer.
Visual, Provided by red LED's.
Test automatically terminated on failure.
RREELLIIAABBLLEE
optional different line voltages available (100V, 110V, 220V, 230V, 240V)
STD45662-A
Two position terminal block on rear panel must be shorted for high voltage
If a failure stops the test, the front voltage display will hold the last voltage
after a few seconds only on passing test condition.
It allows the interface with a PLC or other machine using relay closures. This option allows isolation between the PLC and the Hipot tester.
Provided by front panel meter, directly connected to high voltage output.