Hld_rrc Connection Establishment

RRC CONNECTION ESTABLISHMENT

Message: RRC CONNECTION Request (pg 390, 10.2.39)Direction: UE UTRANSignaling Radio Bearer: SRB0RLC Mode: TMLogical Channel: CCCHTransport Channel: UL-RACH

RB INFORMATION ELEMENTS:

Predefined Configuration status information > Boolean

The UE has all preconfigurations (RB, TrCH and PhyCH configurations) stored with the same value tag as broadcast in the cell in which the RRC connection establishment is initiated.

UE INFORMATION ELEMENTS:

Initial UE Identity (pg 447, 10.3.3.15):

IMSI (GSM-MAP) (pg 430, 10.3.1.5): IMSI > 6 to 21 elements (Integers 0 to 9)TMSI (GSM-MAP) (pg 434, 10.3.1.17): TMSI > leftmost bit contains MSB of TMSI (32 bit string)LAI (pg 431, 10.3.1.7):

PLMN Identity (pg 432, 10.3.1.11):MCC > Integers 0 to 9MNC > Integers 0 to 9LAC: 16 Bit String

P-TMSI (pg 433, 10.3.1.13) > 32 bit string RAI (Routing Area Identification) (pg 434, 10.3.1.16):

LAI (pg 431, 10.3.1.7):PLMN Identity (pg 432, 10.3.1.11):

MCC > Integers 0 to 9MNC > Integers 0 to 9LAC: 16 Bit String

RAC (Routing Area Code) (pg 433, 10.3.1.15) > 8 bit stringIMEI (pg 429, 10.3.1.4) > Integers 0 to 15ESN (DS-41) > 32 bit stringIMSI (DS-41) > Octet string (size (5 to 7))

IMSI (DS-41) (Need: MP) > Octet string (size (5 to 7))ESN (DS-41) (Need: MP) > 32 bit stringTMSI (DS-41) > Octet string (size (2 to 17))

The purpose of the IE "Initial UE identity" is to provide a unique UE identification at the establishment of an RRC connection. Upper layers shall set the variable SELECTED_PLMN. If the variable SELECTED_PLMN in the UE indicates "GSMMAP", the UE shall choose "UE id type" in the IE "Initial UE identity" with the following priority:

1. TMSI2. P-TMSI3. IMSI4. IMEI

When being used, the IEs "TMSI (GSM-MAP)," "P-TMSI (GSM-MAP)", "IMSI (GSM-MAP)", "LAI" and "RAI" shall be set equal to the values of the corresponding identities stored in the USIM or SIM.

Establishment Cause (pg 445, 10.3.3.11) > Enumerated (Originating Conversational Call, Originating Streaming Call, Originating Interactive Call, Originating Background Call, Originating Subscribed traffic Call, Terminating Conversational Call, Terminating Streaming Call, Terminating Interactive Call, Terminating Background Call, Emergency Call, Inter-RAT cell reselection, Inter-RAT cell change order, Registration, Detach, Originating High Priority Signaling, Originating Low Priority Signaling, Call reestablishment, Terminating High Priority Signaling, Terminating Low Priority Signaling, Terminating – cause unknown)

Cause for an RRC Connection Establishment Request.

Protocol Error Indicator (pg 459, 10.3.3.27) > Boolean This variable indicates whether there exists a protocol error that is to be reported to UTRAN.

UE Specific Behavior Information 1 Idle (pg 473, 10.3.3.51) > 4 Bit StringThis IE indicates the UE conformance typically for RRC connection establishment from idle mode.

MEASUREMENT INFORMATION ELEMENTS:Measured Results on RACH (Pg 579, 10.3.7.45):The "best" FDD cell has the largest value when the measurement quantity is "Ec/No" or "RSCP". On the other hand, the "best" cell has the smallest value when the measurement quantity is "Pathloss". The "best" TDD cell has the largest value when measurement quantity is "Primary CCPCH RSCP".

Measurement Results for current cell:

FDD:CPICH Ec/No > Integers 0 to 49 (in dB)CPICH RSCP > Integers 0 to 91 (in dBm)Pathloss > Integers 46 to 158 (in dB)

TDD:3.84Mcps TDD:

Timeslot ISCP (pg 592, 10.3.7.65) > Integers 0 to 91 (TDD only)1.28Mcps TDD:

Timeslot ISCP (pg 592, 10.3.7.65) > Integers 0 to 91 (TDD only)

Primary CCPCH RSCP > Integers 0 to 91 (TDD only)

Measurement Results for monitored cells:SFN-SFN Observed Time Difference (pg 591, 10.3.7.63):Type 1 > Integers 0 to 9830399 (FDD and 3.84 Mcps TDD) Integers 0 to 3276799 (1.28Mcps TDD)Type 2 > Integers 0 to 40961 (FDD and 3.84 Mcps TDD) Integers 0 to 27649 (1.28Mcps TDD)

FDD:Primary CPICH info (pg 537, 10.3.6.60):

Primary Scrambling Code > Integers 0 to 511CPICH Ec/No > Integers 0 to 49 (in dB)CPICH RSCP > Integers 0 to 91 (in dBm)Pathloss > Integers 46 to 158 (in dB)

TDD:Cell Parameters Id (pg 507, 10.3.6.9) > Integers 0 to 127Primary CCPCH RSCP Info (pg 584, 10.3.7.54)

Primary CCPCH RSCP > Integers 0 to 91Delta (Primary CCPCH RSCP) > Integers -5 to -1Actual Primary CCPCH RSCP = Primary CCPCH RSCP + Delta

Primary CCPCH RSCP

Monitored Cells consist of neighbor cells.

Access Stratum Release Indicator > Enumerated (Rel-4, Rel-5)

This IE indicates the release of the RRC transfer syntax supported by the UE.

Message: RRC CONNECTION SETUP (pg 391, 10.2.40)Direction: UTRAN UESignaling Radio Bearer: SRB0RLC Mode: TMLogical Channel: CCCHTransport Channel: DL-FACH


Initial UE Identity:

Please go through RRC Connection Request for details.

RRC Transaction Identifier (pg 463, 10.3.3.36):

The IE "RRC transaction identifier" may be used, together with the message type, for identification of an invocation of a downlink procedure (transaction). The UE behavior for accepting or rejecting transactions based on the message type and the IE "RRC transaction identifier".

Normal RRC Tr Id > Integers 0 to 3Extended RRC Tr Id > Integers 0 to 15.

Activation time (pg 442, 10.3.3.1) > Integers 0 to 255Activation Time defines the frame number/time at which the operation/changes caused by the related message shall take effect.

New U-RNTI (pg 472, 10.3.3.47):The U-RNTI (UTRAN Radio Network Temporary Identity) is allocated to a UE having a RRC connection and identifies the UE within UTRAN.

U-RNTI:SRNC Identity > 12 bit stringS-RNTI > 20 bit string

New C-RNTI (pg 444, 10.3.3.8):The cell RNTI (C-RNTI) identifies a UE having a RRC connection within a cell. The UE shall use that C-RNTI when using common transport channels of type RACH and FACH in the current cell.

C-RNTI > 16 bit string

RRC State Indicator (pg 463, 10.3.3.35a) > Enumerated (CELL_DCH, CELL_FACH, CELL_PCH, URA_PCH).Indicates to a UE the RRC state to be entered.

UTRAN DRX Cycle Length Coefficient (pg 472, 10.3.3.49) > Integers 3 to 9

The UE may use Discontinuous Reception (DRX) in order to reduce power consumption. When DRX is used the UE needs only to receive at one paging occasion per DRX cycle. The UE may be instructed to use a specific DRX cycle length by the network.

Capability Update Requirement (pg 442, 10.3.3.2):Indicates to the UE which specific capabilities to transfer to the network.

UE radio access FDD capability update requirement > BooleanUE radio access 3.84 Mcps TDD capability update requirement > BooleanUE radio access 1.28 Mcps TDD capability update requirement > BooleanSystem specific capability update requirement > Enumerated (GSM, GERAN lu)

RB INFORMATION ELEMENTS:

Signaling RB Information to Setup list (pg 488, 10.3.4.24):

RB Identity (pg 482, 10.3.4.16): > Integers 1 to 32. An identification number for the radio bearer affected by a certain message.

RLC Info (pg 486, 10.3.4.23):Uplink:AM RLC:

Transmission RLC Discard (pg 488, 10.3.4.25):Different modes for discharging the RLC buffer on the transmitter side are:"Timer based with explicit signalling", "Timer based without explicit signalling", "Discard after Max_DAT retransmissions" or "No_discard". For unacknowledged mode and transparent mode, only Timer based without explicit signalling is applicable. If "No_discard" is used, reset procedure shall be done after Max_DAT retransmissions.

Timer Based with Explicit Signaling:Timer_MRW > Integers (50, 60, 70, 80, 90, 100, 120, 140, 160, 180, 200,

300, 400, 500, 700, 900) Timer_discard > Integers (100, 250, 500, 750, 1000, 1250, 1500, 1750,

2000, 2500, 3000, 3500, 4000, 4500, 5000, 7500). MaxMRW > Integers (1, 4, 6, 8, 12 16, 24, 32)

Timer Based without Explicit Signaling:Timer_discard > Integers (10, 20, 30, 40, 50, 60, 70, 80, 90, 100)

MAX DAT Retransmissions:MAX_DAT > Integers (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40)Timer_MRW > Integers (50, 60, 70, 80, 90, 100, 120, 140, 160, 180, 200,

300, 400, 500, 700, 900)MaxMRW > Integers (1, 4, 6, 8, 12 16, 24, 32)

No Discard:MAX_DAT > Integers (1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40)

Transmission Window Size > Integers (1, 8, 16, 32, 64,128, 256, 512, 768, 1024, 1536, 2047, 2560, 3072, 3584, 4095)Maximum number of RLC Pus sent without getting them acknowledged.

Timer_RST > Integers (50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 700, 800, 900, 1000)Elapsed time in milliseconds. It is used to trigger the retransmission of RESET PDU.Max_RST > Integers (1, 4, 6, 8, 12 16, 24, 32)

Polling Info (pg 477, 10.3.4.4):Timer_poll_prohibit > Integers (10...550 by step of 10, 600...1000 by step

of 50). Minimum time between polls in ms.Timer_poll > Integers (10..550 by step of 10, 600..1000 by step of 50)

Poll_PDU > Integers (1, 2, 4, 8, 16, 32, 64, 128)Poll_SDU > Integers (1, 4, 16, 64)

Last Transmission PDU poll > Boolean Last Retransmission PDU poll > Boolean

Poll_Window > Integers (50, 60, 70, 80, 85, 90, 95, 99) Timer_poll_periodic > Integers (100, 200, 300, 400, 500, 750, 1000, 2000)

UM RLC:

Transmission RLC Discard (pg 488, 10.3.4.25):Please go through AM RLC for details.

TM RLC:

Transmission RLC Discard (pg 488, 10.3.4.25):Please go through AM RLC for details.

Segmentation Indication > Boolean

Downlink: AM RLC:

DL RLC PDU Size > Integers 0 to 4992In Sequence Delivery > BooleanRLC shall preserve the order of higher layer PDUs when these are delivered.Receiving Window Size > Integers (1, 8, 16, 32, 64,128, 256, 512, 768, 1024, 1536, 2047, 2560, 3072, 3584, 4095)Maximum number of RLC Pus allowed to be received.DL RLC Status Info (pg 474, 10.3.4.1):

Timer_Status_Prohibit > Integers (10...550 by step of 10, 550...1000 by step of 50)

Missing PDU Indicator > BooleanTimer_STATUS_Periodic > Integers (100, 200, 300, 400, 500, 750, 1000,

2000)

UM RLC:

DL UM RLC LI size > Integers (7, 15)

TM RLC:

Segmentation Indication > BooleanOne sided RLC Establishment > BooleanIndicates that only one side of the AM RLC entity is re-established.

Same as RB (RB Identity pg 482, 10.3.4.16) > Integers 1 to 32

RB mapping Info: (pg 484, 10.3.4.21)A multiplexing option for each possible transport channel or MAC-d flow this RB can be multiplexed on.

UL RLC logical channel info:RLC logical channel mapping indicator > BooleanIndicates that the first logical channel shall be used for data PDUs and the second logical channel shall be used for control PDUs.Number of Uplink RLC Logical channels:

Uplink Transport Channel Type > Enumerated (DCH, RACH, USCH)UL Transport Channel Identity (pg 499, 10.3.5.18) > Integers 1 to 32 Logical Channel Identity > Integers 1 to 15

RLC Size List:All > NULL Configured > NULL Explicit:RLC Size Index > Integers 1 to MaxTFMAC Logical Channel Priority > Integers 1 to 8

DL RLC logical channel info:Number of DL RLC logical channels:DL Transport channel type > Enumerated (DCH, FACH, DSCH, DCH+ DSCH, HS-DSCH, DCH + HSDSCH)DL DCH transport channel Identity (pg 499, 10.3.5.18) > Integers 1 to 32DL DSCH transport channel Identity (pg 499, 10.3.5.18) > Integers 1 to 32DL HS-DSCH MAC-d flow identity (pg 494, 10.3.5.7c) > Integers 0 to 7Logical Channel Identity > Integers 1 to 15

TRANSPORT CHANNEL ELEMENTS:

UL Transport channels:

UL Transport channel information common for all transport channels: (pg 502, 10.3.5.24)PRACH Transport Format Combination Set (pg 499, 10.3.5.20):

TFCI Field 1 Information (TFCS Explicit Configuration pg 497, 10.3.5.13): Complete reconfiguration:

TFCS Complete reconfiguration information (pg 498, 10.3.5.15):TFCS Reconfiguration/Addition Information:

2 bit CTFC > Integers 0 to 3Power offset information (pg 494, 10.3.5.8) > See below4 bit CTFC > Integers 0 to 15Power offset information (pg 494, 10.3.5.8) > See below6 bit CTFC > Integers 0 to 63Power offset information (pg 494, 10.3.5.8) > See below8 bit CTFC > Integers 0 to 255Power offset information (pg 494, 10.3.5.8) > See below12 bit CTFC > Integers 0 to 4095Power offset information (pg 494, 10.3.5.8) > See below16 bit CTFC > Integers 0 to 65535Power offset information (pg 494, 10.3.5.8) > See below24 bit CTFC > Integers 0 to 16777215Power offset information (pg 494, 10.3.5.8) > See below

Power Offset Information (pg 494, 10.3.5.8):Signalled Gain Factors:

FDD:Gain Factor Beta c > Integers 0 to 15TDD:Gain Factor Beta d > Integers 0 to 15Reference TFC ID > Integers 0 to 3

Computed Gain Factors:Reference TFC ID > Integers 0 to 3FDD:Power Offset P p-m > Integers -5 to 10

Addition:TFCS Addition:TFCS Complete reconfiguration information (pg 498, 10.3.5.15):

TFCS Reconfiguration/Addition Information:2 bit CTFC > Integers 0 to 3Power offset information (pg 494, 10.3.5.8) > See below4 bit CTFC > Integers 0 to 15Power offset information (pg 494, 10.3.5.8) > See below6 bit CTFC > Integers 0 to 63Power offset information (pg 494, 10.3.5.8) > See below8 bit CTFC > Integers 0 to 255Power offset information (pg 494, 10.3.5.8) > See below12 bit CTFC > Integers 0 to 4095Power offset information (pg 494, 10.3.5.8) > See below16 bit CTFC > Integers 0 to 65535Power offset information (pg 494, 10.3.5.8) > See below24 bit CTFC > Integers 0 to 16777215Power offset information (pg 494, 10.3.5.8) > See below




Removal:

TFCS Removal Information (pg 499, 10.3.5.16):TFCI (pg 499, 10.3.5.19):Transport Format Combination: Integers 0 to 1023

Replace:

Addition:TFCS Addition:TFCS Complete reconfiguration information (pg 498, 10.3.5.15):

TFCS Reconfiguration/Addition Information:2 bit CTFC > Integers 0 to 3Power offset information (pg 494, 10.3.5.8) > See below4 bit CTFC > Integers 0 to 15Power offset information (pg 494, 10.3.5.8) > See below6 bit CTFC > Integers 0 to 63Power offset information (pg 494, 10.3.5.8) > See below8 bit CTFC > Integers 0 to 255Power offset information (pg 494, 10.3.5.8) > See below12 bit CTFC > Integers 0 to 4095Power offset information (pg 494, 10.3.5.8) > See below16 bit CTFC > Integers 0 to 65535Power offset information (pg 494, 10.3.5.8) > See below24 bit CTFC > Integers 0 to 16777215Power offset information (pg 494, 10.3.5.8) > See below




Removal:

TFCS Removal Information (pg 499, 10.3.5.16):TFCI (pg 499, 10.3.5.19):Transport Format Combination: Integers 0 to 1023

FDD mode:TFC Subset (pg 500, 10.3.5.22):

Minimum allowed Transport format combination index: (pg 499, 10.3.5.19)

Transport Format Combination: Integers 0 to 1023Allowed transport format combination: (pg 499, 10.3.5.19)

Transport Format Combination: Integers 0 to 1023Non-allowed transport format combination: (pg 499, 10.3.5.19)

Transport Format Combination: Integers 0 to 1023UL Transport Channel Type > Enumerated (DCH, USCH)Restricted UL TrCH Identity (pg 499, 10.3.5.18):

Transport Channel Identity > Integers 1 to 32Allowed TFI > Integers 0 to 31

UL DCH TFCS (pg 499, 10.3.5.20) > See TFCS above

TDD mode:UL TFCS Identity (pg 499, 10.3.5.21):

TFCS ID > Integers 1 to 8Shared Channel Indicator > Boolean

UL TFCS (pg 499, 10.3.5.20)> See TFCS aboveTFC Subset (pg 500, 10.3.5.22) > See FDD mode above

TFC Subset list: TDD mode:TFC ID (pg 499, 10.3.5.21): See UL TFCS Identity above

TFC Subset (pg 500, 10.3.5.22) > See FDD mode above

Added or Reconfigured UL TrCH information (pg 491, 10.3.5.2):UL TrCH Type > Enumerated (DCH, USCH)UL TrCH Identity (pg 499, 10.3.5.18):

Transport Channel Identity > Integers 1 to 32TFS (pg 500, 10.3.5.23):Dedicated Transport Channels:Dynamic Transport Format Information:

RLC Size: Integers 0 to 4992Number of TBs and TTI List:

TTI > Integers (10, 20, 40, 80)Number of Transport Blocks > 0 to 512

Logical Channel List:ALL > NULLConfigure > NULL

Explicit List:RB Identity (pg 482, 10.3.4.16) > Integers 1 to 32Logical Channel > Integers 0 to 1

Semi-static transport format information (pg 496, 10.3.5.11):

TTI > Integers (10, 20, 40, 80, dynamic 5)Type of channel coding > Enumerated (No Coding, Convolutional, Turbo)Coding Rate > Enumerated (1/2, 1/3)Rate-matching attribute > Integers (1 to hiRM)CRC Size > Integers (0, 8, 12, 16, 24)

Common Transport Channels:Dynamic Transport Format Information:

RLC Size: Integers 0 to 4992Number of TBs and TTI List:

Number of Transport Blocks > 0 to 512

TDD:TTI > Integers (10, 20, 40, 80)

Logical Channel List:ALL > NULLConfigure > NULLExplicit List:

RB Identity (pg 482, 10.3.4.16) > Integers 1 to 32Logical Channel > Integers 0 to 1

Semi-static transport format information (pg 496, 10.3.5.11):TTI > Integers (10, 20, 40, 80, dynamic 5)Type of channel coding > Enumerated (No Coding, Convolutional, Turbo)Coding Rate > Enumerated (1/2, 1/3)Rate-matching attribute > Integers (1 o hiRM)CRC Size > Integers (0, 8, 12, 16, 24)

DL Transport Channels:DL Transport Channel information common to all Transport channels (pg 492, 10.3.5.6):SCCPCH TFCS (pg 499, 10.3.5.20): See TFCS aboveFDD:Explicit:

DL DCH TFCS (pg 499, 10.3.5.20): See TFCS above

TDD:DL TFCS Identity (pg 499, 10.3.5.21):TFCS ID > Integers 1 to 8Shared Channel Indicator > Boolean

Independent:DL TFCS (pg 499, 10.3.5.20): See TFCS above

UL DCH TFCS Identity (pg 499, 10.3.5.21):TFCS ID > Integers 1 to 8Shared Channel Indicator > Boolean

Added or Reconfigured DLTrCH Information (pg 489, 10.3.5.1):DL Transport Channel type > Enumerated (DCH, DSCH, HS-DSCH) > HS-DSCH in REL 5.DL Transport Channel Identity (pg 499, 10.3.5.18) > Integers (1 to 32)DL Parameters:

Explicit:TFS (pg 500, 10.3.5.23) > See TFS above

SameAsUL:UL Transport channel type > Enumerated (DCH, USCH) >USCH: TDD only.

ULTrCH Identity (pg 499, 10.3.5.18) > Integers (1 to 32)

HS-DSCH:HARQ Info: (pg 494, 10.3.5.7a)Number of Processes > Integers 1 to 8Choice of Memory Partitioning:Implicit > Explicit:

Process memory size > Integer (800 ... 16000 by step of 800, 17600 ... 32000 by step of 1600, 36000 ... 80000 by step of 4000, 88000 ... 160000 by step of 8000, 176000 ... 304000 by step of 16000)

Added or Reconfigured MAC-d flow: (pg 491, 10.3.5.1a)MAC-hs queue ID > Integers 0 to 7MAC-d flow Identity > Integers 0 to 7 (pg 494, 10.3.5.7c)T1 > Integers (10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 200, 300, 400)MAC-hs window size > Integers (4, 6, 8, 12, 16, 24, 32)MAC-d PDU size > integers 1 to 1500MAC-d PDU size Index > integers 0 to 7

DCH Quality Target (BLER Quality value pg 496 10.3.5.10) > Real (-6.3 ...0 by step of 0.1)

Preconfiguration:Predefined Configuration Identity (pg 477, 10.3.4.5) > Integers 0 to 15.

Default Configuration:Default Configuration Mode > Enumerated (FDD, TDD)

Default Configuration Identity (pg 473, 10.3.4.0) > Integers 0 to 10 => Previous Versions. 11, 12 => REL 4. 13=> REL 5.

PHYSICAL CHANNEL INFORMATION ELEMENTS:

Frequency info: (pg 522, 10.3.6.36)FDD:

UARFCN uplink (Nu) > Integers 0 to 16383UARFCN downlink (Nd) > Integers 0 to 16383

TDD:UARFCN (Nt) > Integers 0 to 16383

UL RADIO RESOURCES:

Maximum Allowed UL Tx Power (pg 527, 10.3.6.39): Integers -50 to 33 in dBm UL DPCH Info: (pg 547, 10.3.6.88)

UL DPCH Power control info: (pg 548, 10.3.6.91)FDD:DPCCH Power offset > Integers -164 to -6 in dB by steps of 2PC Preamble > Integers 0 to 7 in number of framesSRB Delay > Integers 0 to 7 in number of framesPower control Algorithm > Enumerated (Algorithm1, Algorithm2)TPC Step size > Integers 1, 2 in dBDelta (ACK) > Integers 0 to 8Delta (NACK) > Integers 0 to 8ACK-NACK repetition factor > Integers 1 to 4

TDD:UL target SIR > Real (-11 to 20) in steps of 0.5dBBroadcast UL OL PC info > Null3.84Mcps TDD:Individual Timeslot Interference > (pg 527, 10.3.6.38)

Timeslot Number: (pg 545, 10.3.6.84)3.84Mcps TDD > Integers 0 to 141.28 Mcps TDD > Integers 0 to 6

UL Timeslot Interference: (pg 546, 10.3.6.87a)TDD UL Interference > Integers -110 to -52 dBm

DPCH Constant value (Quality Margin pg 508, 10.3.6.11a):TDD Constant value > Integers -35 to 10 dB

1.28Mcps TDD:TPC Step Size > Integers 1 to 3

Primary CCPCH Tx Power (pg 537, 10.3.6.59) > Integers 6 to 43 in dBm.

FDD:Scrambling code type: Enumerated (Short, Long)Scrambling code number: Integers 0 to 16777215Number of DPDCH > Integers 1 to Max DPDCH

Spreading Factor > Integer (4, 8, 16, 32, 64, 128, 256)TFCI Existence > BooleanNumber of FBI bits > Integers 1,2Puncturing Limit > Real (0.40 ...1 by step of 0.04)

TDD:UL Timing Advance Control (pg 552, 10.3.6.96):

3.84 Mcps TDD:UL Timing Advance: (pg 552, 10.3.6.95) > Integers 0 to 63Activation Time > (pg 442, 10.3.3.1) Integers 0 to 255

1.28 Mcps TDD:UL Synchronization step size > Integers 1 to 8UL Synchronization frequency > Integers 1 to 8

Synchronization Parameters:SYNC_UL codes bitmap > 8 bit stringFPACH Info (pg 521, 10.3.6.35a):Timeslot Number > Integers 0 to 6Channelization code > Enumerated (16/1 to 16/16)Midamble shift and burst type: (pg 527, 10.3.6.41)

3.84 Mcps TDD:Type 1:Midamble Allocation mode > Enumerated (Default midamble,

Common midamble, UE specific midamble)Midamble Configuration burst type 1 and 3 > Integers 4, 8, 16Midamble shift > Integers 0 to 15Type 2:Midamble Allocation mode > Enumerated (Default midamble,

Common midamble, UE specific midamble)Midamble Configuration burst type 1 and 3 > Integers 3, 6Midamble shift > Integers 0 to 5

Additional TPC-SS Symbols > Integers 1 to 15

Channelization Code > Enumerated ((1/1), (2/1), (2/2), (4/1) to (4/4), (8/1) to (8/8), (16/1) to (16/16)).

Number of additional time slots > Integers 1 to Max TS-1

Timeslot List:Individual timeslot info: (pg 526, 10.3.6.37) > see aboveTimeslot Number (pg 545, 10.3.6.84):

3.84Mcps TDD > Integers 0 to 141.28 Mcps TDD > Integers 0 to 6

Channelization Code > Enumerated ((1/1), (2/1), (2/2), (4/1) to (4/4), (8/1) to (8/8), (16/1) to (16/16)).

UL CCTrCH list to remove:TFCS ID > Integers 1 to 8

DL RADIO RESOURCES:DL Information common for all radio links:DL DPCH Information common for all radio links: (pg 509, 10.3.6.18)Timing Advance > Enumerated (Initialize, maintain)CFN-Target SFN frame offset > Integers 0 to 255Downlink DPCH power control information (pg 514, 10.3.6.23):

FDD:DPC mode > Enumerated (single TPC, TPC triplet in soft)TDD:TPC step size > integers 1 to 3 in dB

MAC-d HFN initial value > 24 bit string

FDD:Power offset P (pilot-DPDCH) > Integers 0 to 24DL rate matching restriction information: (pg 517, 10.3.6.31)

DL transport channel type > Enumerated (DCH)Restricted DL TrCH Identity: (pg 499, 10.3.5.18)

TrCH Identity > Integers 1 to 32Allowed TFIs > Integers 0 to 31

Spreading Factor > Integer (4, 8, 16, 32, 64, 128, 256, 512)Fixed or Flexible position > Enumerated (fixed, flexible)TFCI existence > Boolean

SF:SF=256:Number of bits for pilot bits > Integers (2, 4, 8)

SF=128:Number of bits for pilot bits > Integers (4, 8)

DL information for each radio link: (pg 515, 10.3.6.27)FDD:Primary CPICH info:

Primary Scrambling Code (pg 537, 10.3.6.60) > Integers 0 to 511 Cell ID: (pg 435, 10.3.2.2)

Cell Identity > 28 bit stringServing HS-DSCH radio link indicator > Boolean

TDD:Primary CCPCH info: (pg 536, 10.3.6.57)

FDD:Tx Diversity Indicator > Boolean

TDD:3.84 Mcps TDD:

Sync Case 1:Timeslot > Integers 0 to 14Sync Case 2:Timeslot > Integers 0 to 6

1.28 Mcps TDD:TSTD Indicator: (pg 546, 10.3.6.85a)

TSTD Indicator > BooleanCell Parameters ID: (pg 507, 10.3.6.9)

Cell Parameters ID > Integers 0 to 127SCTD Indicator: (pg 540, 10.3.6.70a)

SCTD Indicator > Boolean

DL DPCH info for each radio link: (pg 511, 10.3.6.21)FDD:Primary CPICH usage for each channel estimation (pg 537, 10.3.6.62) > Enumerated (Primary CPICH may be used, Primary CPICH shall not be used)DPCH frame offset > Integers (0 to 38144 by steps of 256)Secondary CPICH info (pg 542, 10.3.6.73):

Secondary scrambling code > Integers 1 to 15 (pg 542 10.3.6.74)DL Channelization code:

Secondary scrambling code (pg 542, 10.3.6.74) > Integers 1 to 15Spreading Factor > Integer (4, 8, 16, 32, 64, 128, 256, 512)

Code Number > Integers (0 to SF-1)Scrambling code change > Enumerated (code change, no code change)

TPC combination index (pg 542, 10.3.6.85) > Integers 0 to 5 Power offset P (TPC-DPDCH): Integers 0 to 24Closed loop timing adjustment mode > Integers 1, 2

TDD:DL CCTrCH List:TFCS ID > Integers 1 to 8Time Info (pg 545, 10.3.6.83):

Activation Time: Integers 0 to 255 (pg 542 10.3.3.1)Duration > Integers 1 to 4096, Infinite

Common timeslot info (pg, 507, 10.3.6.10):2nd Interleaving mode > Enumerated (Frame, timeslot)TFCI coding > Integers (4, 8, 16, 32)Puncturing limit > Real (0.40 to 1.0 by steps of 0.04)Repetition period > Integers (1, 2, 4, 8, 16, 32, 64)Repetition Length > Integers (1 to Repetition Period -1)

DL DPCH timeslots and codes: (pg 517, 10.3.6.32)First Individual Timeslot Info: (pg 526, 10.3.6.37)Timeslot Number (pg 545, 10.3.6.84):


TFCI Existence > BooleanMidamble Shift and Burst Type (pg 527, 10.3.6.84) > See above 1.28 Mcps TDD:

Modulation > Enumerated (QPSK, 8PSK)SS-TPC Symbols > Enumerated (0, 1, 16/SF)Additional TPC-SS Symbols > Integers 1 to 15

First timeslot channelization codes: (pg 509, 10.3.6.17)First channelization code > Enumerated ((16/1) to (16/16))Last channelization code > Enumerated ((16/1) to (16/16))Channelization codes bitmap > 16 bit string

Number of additional timeslots > Integers (1 to maxTS-1)Additional timeslots list:Timeslot Number: (pg 545, 10.3.6.84)


Individual timeslot info: (pg 526, 10.3.6.37) > see aboveChannelization codes: (pg 509, 10.3.6.17) > see above

UL CCTrCH TPC List:UL TPC TFCS Identity: (pg 499, 10.3.5.21)

TFCS ID > Integers 1 to 8

Shared Channel Indicator > Boolean

DL CCTrCH List to remove: TFCS ID > Integers 1 to 8

RRC CONNECTION SETUP COMPLETE (pg 394, 10.2.41)

RLC-SAP: AMLogical channel: DCCHDirection: UE → UTRAN


RRC Transaction identifier: (pg 463, 10.3.3.36)Normal RRC Transaction Identifier > Integers 0 to 3Extended RRC Transaction Identifier > Integers 0 to 15

START List:CN Domain Identity (pg 428, 10.3.1.1) > Enumerated (CS Domain, PS Domain) START (pg 466, 10.3.3.38) > 20 bit string

UE Radio access capability: (pg 466, 10.3.3.42)Access stratum release indicator (Need: MP) > Enumerated (REL 99), (Need: not_rrc_connectionsetupcomplete) > Enumerated (REL 4, REL 5)

DL capability with simultaneous HS-DSCH configuration > Enumerated (32kbps, 64kbps, 128kbps, 384 kbps)

PDCP capability: (pg 455, 10.3.3.24)Support for lossless SRNS relocation > BooleanSupport for lossless DL RLC PDU size change > BooleanSupport for RFC2507 > BooleanMax HC context space > Integer (1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072) > 16384 to 131072 REL 5 only.Support for RFC3095 > BooleanMax Number of ROHC context extensions > Integer (2, 4, 8, 12, 16, 24, 32, 48, 64, 128, 256, 512, 1024, 16384)Reverse decompression depth > Integers 0 to 65535Support for RFC3095 context relocation > Boolean

RLC Capability: (pg 462, 10.3.3.34)Total RLC AM buffer size > Integers (10, 50, 100, 150, 500, 1000, 200, 300,400, 750) > 200 to 750 from REL 5.Max RLC AM window size > Integers (2047, 4095)Max Number of AM entities > Integers (4, 5, 6, 8, 16, 30)

Transport Channel Capability: (pg 464, 10.3.3.40)

DL TRANSPORT CHANNELCAPABILITY INFORMATION ELEMENTS:Max Number of bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)Max Convolutionally coded bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)Max Turbo coded bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)Max number of simultaneous transport channels > Integers (4, 8, 16, 32)Max number of simultaneous CCTrCH > Integers 1 to 8Max number of received transport blocks > Integer (4, 8, 16, 32, 48, 64, 96, 128, 256, 512)Max Number of TFC > Integer (16, 32, 48, 64, 96, 128, 256, 512, 1024)Max number of TF > Integer (32, 64, 128, 256, 512, 1024)Support for turbo decoding > Boolean

UL TRANSPORT CHANNELCAPABILITY INFORMATION ELEMENTS:

Max Number of bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)Max Convolutionally coded bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)

Max Turbo coded bits received > Integer (640, 1280, 2560, 3840, 5120, 6400, 7680, 8960, 10240, 20480, 40960, 81920, 163840)Max number of simultaneous transport channels > Integers (4, 8, 16, 32)Max number of simultaneous CCTrCH > Integers 1 to 8Max number of received transport blocks > Integer (4, 8, 16, 32, 48, 64, 96, 128, 256, 512)Max Number of TFC > Integer (16, 32, 48, 64, 96, 128, 256, 512, 1024)Max number of TF > Integer (32, 64, 128, 256, 512, 1024)Support for turbo decoding > Boolean

RF capability FDD: (pg 461, 10.3.3.33)UE power class > Enumerated (1 to 4)TX/RX frequency separation > Enumerated (190, 174.8- 205.2, 134.8-245.2)

RF capability TDD: (pg 462, 10.3.3.33b)UE power class > Enumerated (1 to 4)RF bands > Enumerated (a, b, c, a+b, a+c, b+c, a+b+c)Chip rate capability > Enumerated (3.84Mcps, 1.28Mcps)

RF capability 1.28Mcps TDD: (pg 462, 10.3.3.33c)RF bands > Enumerated (a, b, c, a+b, a+c, b+c, a+b+c)

Physical channel capability: (pg 456, 10.3.3.25)

DL PHYSICAL CHANNELCAPABILITY INFORMATION ELEMENTS:Max number of DPCH codes > Integers 1 to 8Max number of physical channel bits received > Integer (1200, 2400, 3600, 4800, 7200, 600, 14400, 19200, 28800, 38400, 48000, 57600, 67200, 76800) Support for SF=512 and 80ms TTI for DPCH > Boolean

Support of HS-PDSCH (Need: MP)Supported:HS-DSCH physical layer category > Integers (1 to 64)Unsupported:3.84Mcps TDD DL physical channel capability:Max number of timeslots per frame > Integers 1 to 14Max number of physical channels per frame > Integers 5 to 224Min SF > Integers (1, 16)Support of PDSCH > Boolean

Support of HS-PDSCH: (not_IRAT Ho Info)Supported:HS-DSCH physical layer category > Integers (1 to 64)Unsupported:Max number of physical channels per timeslot > Integers 5 to 16

1.28Mcps TDD DL physical channel capability:Max number of timeslots per subframe > Integers 1 to 6Max number of physical channels per subframe > Integers 1 to 96Min SF > Integers (1, 16)Support of PDSCH > Boolean

Support of HS-PDSCH:Supported:HS-DSCH physical layer category > Integers (1 to 64)Unsupported: No dataMax Number of physical channels per timeslot > 1 to 16 Support of 8PSK > Boolean

UL PHYSICAL CHANNELCAPABILITY INFORMATION ELEMENTS:

FDD:Max number of DPDCH bits transmitted per 10ms > Integer (600, 1200, 2400, 4800. 9600, 19200. 28800, 38400, 48000, 57600)

3.84Mcps:Max number of timeslots per frame > Integers 1 to 14Max number of physical channels per timeslot > Integers 1, 2Min SF > Integers (1, 2, 4, 8)Support of PUSCH > Boolean

1.28Mcps:Max number of timeslots per frame > Integers 1 to 6Max number of physical channels per timeslot > Integers 1, 2Min SF > Integers (1, 2, 4, 8, 16)Support of PUSCH > BooleanSupport of 8PSK > Boolean

UE multi mode/multi-RAT capability: (pg 466, 10.3.3.41)Support of GSM > BooleanSupport of multi-carrier > BooleanMulti-mode capability > Enumerated (TDD, FDD, TDD/FDD)Support of UTRAN to GERAN NACC > Boolean

Security capability: (pg 464, 10.3.3.37)Ciphering Algorithm capability:UEA0 > BooleanUEA1 > BooleanSpare > BooleanIntegrity Protection algorithm capability:

UIA1 > BooleanSpare > Boolean

UE positioning capability: (pg 471, 10.3.3.45)Standard location methods supported > BooleanUE based OTDOA supported > BooleanNetwork assisted GPS support > Enumerated (‘Network Based’, ‘UE based’, ‘Both’, ‘None’)Support for GPS timing of cell frames measurement > BooleanSupport for IPDL > BooleanSupport for Rx-Tx time difference type 2 measurement > BooleanSupport for UP assisted GPS measurement validity in CELL_PCH and URA_PCH states > Enumerated (true)Support for SFN-SFN observed time difference type2 measurement > Enumerated (true)

Measurement Capability: (pg 450, 10.3.3.21)Need for DL compressed mode:

FDD measurements > Boolean3.84Mcps measurements > Boolean1.28Mcps measurements > BooleanGSM measurements:

GSM 900 > BooleanDCS 1800 > BooleanGSM 1900 > Boolean

Multi-carrier measurement > Boolean

Need for UL compressed mode:FDD measurements > Boolean3.84Mcps measurements > Boolean1.28Mcps measurements > BooleanGSM measurements:

GSM 900 > BooleanDCS 1800 > BooleanGSM 1900 > Boolean

Multi-carrier measurement > Boolean

UE Radio access capability extension: (pg 468, 10.3.3.42a)Frequency band specific capability list:Frequency band > Enumerated (Band I, Band II, Band III-REL 5 only)

RF capability FDD extension: (pg 462, 10.3.3.33a)UE power class > Enumerated (1 to 4)TX/RX frequency separation > Enumerated (190, 174.8- 205.2, 134.8-245.2)

Measurement capability extension: (pg 452, 10.3.3.21a)FDD frequency band > Enumerated (Band I, Band II, Band III-REL 5 only)

Need for DL compressed mode > BooleanNeed for UL compressed mode > Boolean

TDD frequency band > Enumerated (a, b, c)Need for DL compressed mode > BooleanNeed for UL compressed mode > Boolean

GSM frequency band > Enumerated (GSM450, GSM480, GSM850, GSM900 P, GSM900 E, GSM1800, GSM1900)

Need for DL compressed mode > BooleanNeed for UL compressed mode > Boolean

Multi-carrier measurement:Need for DL compressed mode > BooleanNeed for UL compressed mode > Boolean

OTHER INFORMATION ELEMENTS:UE System specific capability:Inter-RAT UE radio access capability: (pg 629, 10.3.8.7)GSM:

Mobile Station Classmark 2: octet string (5)Mobile Station Classmark 3: octet string (1 to 32)

GERAN lu:MS GERAN lu mode Radio Access capability: bit string 1 to 170

CDMA 2000:CDMA 2000 message:

MSG_TYPE(S) > 8 bit stringCdma2000 Messagepayload(s) > bit string (1 to 512)

RRC FAILURE INFO: (pg 395, 10.2.41a)

RLC-SAP: N/A (Sent through a different RAT)Logical channel: N/A (Sent through a different RAT)Direction: UE → UTRAN

Failure Cause (pg 446, 10.3.3.13): Enumerated (configuration unsupported, physical channel failure, incompatible simultaneous reconfiguration, protocol error, compressed mode runtime error, cell update occurred, invalid configuration, configuration incomplete, unsupported measurement)

Protocol Error Information (pg 632, 10.3.8.12):Protocol error cause (pg 459 10.3.3.26): Enumerated (ASN.1 violation or encoding error, Message type nonexistent or not implemented , Message not compatible with receiver state, Information element value not comprehended, Information element missing, Message extension not comprehended)

Date post:	27-Oct-2014
Category:	Documents
Upload:	subba-rao-t
View:	86 times
Download:	1 times

Hld_rrc Connection Establishment

Documents