Spare Parts ListÖhlins Late Model shock absorbers

Series:

LMJ 17500LMJ 20700LMJ 20710LMJ 23900LMJ 23910

Shock body

Piston shaft

Reservoirbody & valves

Service tools

Oil & grease

© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without thewritten permission of Öhlins Racing AB is prohibited. Printed in Sweden.

Introduction

In this manual you will find spare parts to the followingÖhlins shock absorbers:

Öhlins Late Model shock absorbers series:LMJ 17500 Stroke 5.5” Aluminum bodyLMJ 20700 Stroke 7.0” Aluminum bodyLMJ 20710 Stroke 7.0” Steel bodyLMJ 23900 Stroke 9.0” Aluminum bodyLMJ 23910 Stroke 9.0” Steel body

The use of Öhlins original spare parts will guarantee maxi-mum performance out of the serviced shock absorber.Also make sure that you have all the necessary tools beforeyou start working on the Öhlins shock absorber.

Öhlins Late Model shock absorbers

Öhlins LMJ shock absorber with aluminum body. Öhlins LMJ shock absorber with steel body.

Shock bodyLMJ 17500 / 20700 / 23900 (aluminum body)Pos. Part No. Pcs. Description Shock type1:1 00557-01 2 Circlip *1:2 05536-03 2 Ball joint *1:3 00570-19 1 Cylinder head1:4 00338-37 1 O-ring1:5 05220-05 1 Body tube Stroke 5.0”

05220-03 1 Body tube Stroke 7.0”05220-04 1 Body tube Stroke 9.0”

1:6 05410-01 1 Stop screw1:7 05018-02 1 Spring platform Aluminum tube1:8 00329-03 2 Circlip1:9 01293-05 1 Sleeve1:10 05016-01 1 Spring clip1:11 05017-01 1 Stop washer *1:12 00338-84 1 O-ring *1:13 01016-01 2 Seal *1:14 01030-01 1 Pin *1:15 01128-01 1 Adjustment knob *1:16 01054-18 1 End eye *

01255-18 End eye assy complete (including*)

Notes

1 23

1

10

4

5

11

12

13

14

15

13

16

1

21

6

7

8

9

8

1

Shock bodyLMJ 20710 / 23910 / (steel body)Pos. Part No. Pcs. Description Shock type

2:1 00557-01 2 Circlip *2:2 05536-03 2 Ball joint *2:3 00570-19 1 Cylinder head2:4 00338-37 1 O-ring2:5 01010-46 1 Body tube Stroke 7.0”

01010-47 1 Body tube Stroke 9.0”2:6 00532-01 1 Lock nut2:7 05018-01 1 Spring platform2:8 05016-01 1 Spring clip2:9 05017-01 1 Stop washer *2:10 00338-84 1 O-ring *2:11 01016-01 2 Seal *2:12 01030-01 1 Pin *2:13 01128-01 1 Adjustment knob *2:14 01054-18 1 End eye *

01255-18 End eye assy complete (including*)

Notes

13

21

4

5

6

7

8

9

10

11

12

13

11

114

21

2

Piston shaft LMJ (all)Pos. Part No. Pcs. Description Remark3:1 00539-01 1 Lock nut3:2 00578-01 - Washer, see spec. card3:3 00519-02 1 Stop washer, see spec. card3:4 - Shims, see spec. card3:5 03166-01 1 Piston MX

Optional Pistons05114-24 1 Piston Standard05112-01 1 Piston Hi-Frequency05113-01 1 Piston Double digressive01114-14 1 Piston 4-port, linear03810-02 1 Piston 2-port, linear05864-01 1 Piston 2-port, digressive05940-01 1 Piston SOQI05947-01 1 Piston 2-port, double digressive

3:6 00541-01 1 Piston ring Standard piston band00541-02 1 Piston ring Soft piston band05941-01 1 Piston ring SOQI piston band

3:7 00438-19 1 O-ring Piston 5112-0109910-01 1 X-ring Piston 5112-0100438-32 1 O-ring Piston 5113-0100338-92 1 O-ring Piston 5810-02

5854-01, 5947-0100438-53 1 O-ring Piston 5940-01

3:8 00519-04 - Stop washer3:9 05521-03 1 Shaft jet Standard 4.0mm

Optional Shaft Jets05521-04 1 Shaft jet Standard 3.2mm05565-01 1 Shaft jet 1-way comp. 3.2mm, 0mm bleed

05565-02 1 Shaft jet 1-way comp. 3.2mm, 1.0mm bleed

05565-03 1 Shaft jet 1-way comp. 3.2mm, 1.2mm bleed

05565-04 1 Shaft jet 1-way comp. 3.2mm, 1.4mm bleed

05565-05 1 Shaft jet 1-way comp. 3.2mm, 1.6mm bleed

05565-06 1 Shaft jet 1-way comp. 3.2mm, 1.8mm bleed

05566-01 1 Shaft jet 1-way comp. 4.0mm, 0mm bleed

05566-02 1 Shaft jet 1-way comp. 4.0mm, 1.0mm bleed

05566-03 1 Shaft jet 1-way comp. 4.0mm, 1.2mm bleed

05566-04 1 Shaft jet 1-way comp. 4.0mm, 1.4mm bleed

05566-05 1 Shaft jet 1-way comp. 4.0mm, 1.6mm bleed

05566-06 1 Shaft jet 1-way comp. 4.0mm, 1.8mm bleed

3:10 00338-14 1 O-ring3:11 05155-03 1 Adj. needle 4.0 mm

05155-04 1 Adj. needle 3.2 mm05550-04 1 Adj. needle Split 4.0 mm

3:12 05500-13 1 Shaft Stroke 5.0”05500-03 1 Shaft Stroke 7.0”05500-04 1 Shaft Stroke 9.0”

3:13 00566-80 1 Adj. shaft Stroke 5.5”00566-70 1 Adj. shaft Stroke 7.0”00566-71 1 Adj. shaft Stroke 9.0”

3:14 05115-01 1 Rubber stop3:15 01056-13 1 Bushing3:16 05122-02 1 Seal head3:17 00576-01 1 O-ring3:18 01032-01 1 Back-up ring3:19 01027-01 1 X-ring3:20 01031-02 1 Scraper3:21 00575-01 1 Circlip3:22 01065-02 1 End cap3:23 00338-04 1 O-ring3:24 00563-03 1 Bump rubber3:25 01255-18 1 End eye assy

13

14

15

1

2

45

4

8

6

9

10

11

12

16

17

18

19

20

21

22

23

24

3

25

3

7

Notes

Reservoir body & valves LMJ (all)Pos. Part No. Pcs. Description Shock type

4:1 00828-01 1 Screw4:2 03056-01 1 Adj. wheel4:3 01473-02 1 Circlip4:4 00338-53 1 O-ring4:5 01242-02 1 Needle4:6 00884-04 1 Ball4:7 01248-01 1 Spring4:8 01243-02 1 End piece4:9 00338-27 1 O-ring4:10 01247-01 1 Valve housing4:11 01246-01 1 Wave washer4:12 01245-01 1 Shims4:13 01244-01 1 Valve4:14 - - Shims see spec. card4:15 00641-01 1 Washer4:16 00649-01 1 Nut4:17 00862-02 1 Reservoir top4:18 00338-24 1 O-ring4:19 00305-01 1 Piston4:20 00338-26 1 O-ring4:21 00340-01 1 Teflon seal4:22 00302-07 1 Reservoir body4:23 00338-04 1 O-ring4:24 00604-01 1 Rubber valve4:25 00161-03 1 End cap assy.4:26 00329-01 1 Circlip4:27 00338-59 1 O-ring4:28 01050-01 1 Screw4:29 00631-01 1 Banjo bolt4:30 00586-01 4 Washer4:31 00637-09 1 Hose 350 mm (13,8”)

00637-13 1 Hose 520 mm (20,5”)4:32 00382-07 1 Screw4:33 00338-79 1 O-ring4:34 00631-02 1 Banjo bolt

Notes

2

5

67

8

9

10

11

12

14

13

15

16

17

32

33

34

30

30

29

30

31

30 18

19

20

21

22

23

24

25

26

27

1

34

28

4

Service toolsPos. Part No. Description

1 00716-01 Screw driver, blunt2 00720-02 Measure pin assembly3 00720-03 Disassembly tool, reservoir end cap4 00727-03 Jaws, aluminum5 00737-01 Sleeve dia 50mm, steel tube

00737-02 Sleeve dia 51mm, aluminum tube00737-04 Sleeve, reservoir

6 00738-01 Spanner7 00764-01 Plastic lid8 00773-01 Vise9 00778-01 Needle10 01748-01 Aluminum rod11 01753-01 Oil cup12 01781-01 Gas filling device assembly13 01785-02 Mounting cone14 01798-01 Plug, cylinder tube17 01782-01 Tool box

01195-01 Sticker Öhlins memo NASCAR

12

3

4

5

6

7

8

9

1011

12 13

14

Service shimsPos. Part No. Description

18 00745-15 Set of shims 0,15 mm. (10pcs each:OD 16,18,19,20,21,22,23, 26,28, 30, 31, 32, 33, 34, 36, 38)

18 00745-20 Set of shims 0,20 mm. (10pcs each:OD 16,18,19,20,21,22,23, 26, 28, 30,32, 33, 34, 36, 38and ringshims 1120-01,1120-02)

18 00745-25 Set of shims 0,25 mm. (10pcs each:OD 18,19,20,21,22,23, 26, 28, 30, 32,33, 34, 36, 38and ringshims 1125-01,1125-02)

18 00745-30 Set of shims 0,30 mm (10pcs each:OD 16,18,19,20,21,22,23, 26, 28, 30,32, 34, 36, 38and ringshims 1130-01,1130-02,1130-03)

18 00745-98 Dirt track shim kit18 00745-99 X-stack shim kit

Service oil & greasePos. Part No. Description

19 00146-01 Öhlins red grease, 100 g20 00147-01 Öhlins white grease, 100 g21 00105-01 Öhlins shock absorber oil 1 l

17

18

19 20 21

0740

2-02

, Tek

nisk

Illu

stra

tion,

SP

L LM

J . 0

3 04

15.

100

ex.

More info

The ultimate suspension site.Find out everything about your suspension.

Download mounting instructions, manuals and brochures.And a lot more.

Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden Phone +46 8 590 025 00, Fax +46 8 590 025 80

Öhlins USA, Inc., 703-C Old Spartanburg Road, Hendersonville, N.C. 28792, USA.Phone 828-692-4525. Fax 828-692-0595

Authorized dealer

www.ohlins.com