Hoisting System and rotary equipment

- Hoisting system and rotary equipment

- Hoisting system and rotary equipment

Hook block

- The hook block is designed and manufactured in accordance with API spec 8C and other

related technical standards.

- The loaded parts are made of good-quality alloy steel.

- The traveling block and the hook block are designed integrally with a miniature size and a

compact structure, which is suitable for assembly on the truck-mounted drilling rigs.

- Hoisting system and rotary equipment

Swivel

- The swivel is designed and manufactured in accordance with API Spec 8C, SY5210 and other related technical standards. - The loaded parts are made of good-quality alloy steel. - The flushing pipes and packing can be dismantled easily for replacement by design of a portable packing unit.

Main technical specification for swivel

- Hoisting system and rotary equipment

Power Swivel Main technical specification for power swivel

- Hoisting system and rotary equipment

Deadline Anchor

- The deadline anchor is designed and manufactured in accordance with SY5320 and other technical standards. - The main loaded parts are made of good-quality alloy steel. - Each unit will be tested and inspected before delivery and detected with a non-destructive detector strictly according to the related standards.

Main technical specification for deadline anchor (weight indicator)

- Hoisting system and rotary equipment

Kelly drive bushing

- The roller Kelly bushing is designed and manufactured in accordance with API 7K

and other technical standards.

- The loaded parts are made of good-quality alloy steel.

- A new structural design can insure a quick replacement of roller's wheel.

Main technical specification for roller bushing

- Hoisting system and rotary equipment

Rotary table

- The rotary table is designed and manufactured in accordance with API 7K and other

related technical standards.

- The rotary table has a good loading capacity with stable rotation.

- The rotary table can be lubricated well and locked safely, and is convenient for

maintenance.

Main technical specification for rotary table

- Hoisting system and rotary equipment

Rotary table

- Compared with conventional band brake, the hydraulic disc brake has a large braking-torque capacity and a stable braking performance with a small inertia, and it can be operated precisely and flexibly with convenience for debugging and maintenance. - This hydraulic disc brake can be used for working braking, emergency braking, over-reel protection and shut off braking. - There are motor-driven pumps and accumulators, manual pumps, heaters and coolers to be equipped on the hydraulic station with the purpose of a dependable hydraulic-force supply to the executed units. - An integral layout can be realized by adoption of a valve-type connection on the power control system. - Safety and inspection measures are strengthened under the guidance of the design concept of "Humanism Above All" to meet the requirements of HSE.

Main technical specification for hydraulic disc brake