Holistic solutionsfor preparation of sterile goods
From planning to implementation:Centralized instrument preparation from a single source
MMM. Protecting human health.
Feasibility analysis and calculation of capacity At the start of a project, our experts make an inventory to record the
basic conditions and variables in your facilities. After comprehensive
analysis and calculation of capacity, we prepare practical recommen-
dations for creating the optimum system for you.
Concept, design, planning the layout MMM develops a customized design based on your spatial and
logistical conditions using 3D layout planning and visualization and
manages the entire process starting from obtaining approvals and
planning the design for construction, technical building services and
medical technology.
Implementation A team of experienced technicians installs and assembles all systems
and also commissions and tests them. In addition to carrying out
and monitoring all stages of the installation we also ensure that
your RUMED is safe for operation (establishment of a QM system,
workflow optimization etc.).
Continuing operation With our focus on safety and sustainability we work with you and
your employees throughout the complete life cycle to guarantee the
continuing high quality of your RUMED and endoscopy department
over the long term.
H
The increasing complexity of specialist buildings in the health-care system requires technical facilities manage-
ment with medical expertise. With the experience of more than 60 years in the sterile goods reprocessing and as a
manufacturer of own products the MMM has specialized in new building and rebuilding of central sterile service
departments (RUMED) and their connection to adjoining departments.
Cut down the number of interfaces and trust the specialists in the field of hygiene: In association with our partners we plan and implement all required facilities on time and to budget and ensure that
the RUMED continues to operate, including conversions while maintaining operations.
Planning, coordination, design
MMM has been operating worldwide as one of the leading system providers in the service of health since 1954. With a full portfolio of products and services pertaining to sterilization and disinfection systems for hospitals, scientific institutes, laboratories and the pharmaceutical industry, MMM has positioned itself as a crucial quality driver and innovator on the German and international markets. MMM products manufactured in our own production facilities combine industrial production and high-quality skilled work Made in Germany with state-of-the-art control systems and quality to meet all requirements of our customers.
MMM offers a comprehensive range of expertise for all aspects of the RUMED. Our services cover the
manufacture of our own products, detailed planning and consultation, software, installation, logistics and
service, which includes the validation of all processes in the RUMED right through to the project manage-
ment of all construction works for the cleaning, disinfection and sterilization departments.
MMM Group is more than a manufacturer – we implement holistic solutions
The requirements for commercial, logistical and organisational processes for managing a hospital are
becoming more and more complex. Particularly because there are so many tasks and so many different
solutions our customers need partners who are reliable, competent and directly involved to manage the
specific site conditions.
We consider ourselves as not just a supplier of high-end medical devices but as a complete supplier of
services and solutions that make both a commercial and medical contribution to society, ensuring people
become healthy and remain healthy.
MMM Group in health care – everything from a single source
Protecting human health
2 3
Acceptanze
1
Manual precleaning
Automatic cleaning and disinfection
3
7
The sterile supply cycle
As a supplier of complete systems MMM supports all aspects of your RUMED from planning and equipment
through to ensuring seamless operation.
Health-care equipment must ensure at all times that medical devices are prepared in accordance with the
applicable general directives and standards and that the entire sterile supply cycle is a seamless operation.
Reliable preparation of sterile goods, as a decisive factor for the economic success of operating facilities.
It is to be understood as a complex overall concept that is more than the sum of its individual processes.
STERILE AREA
UNCLEAN AREA
CLEAN AREA
1
2
3
Unloading racks and trolleys
4
Checking and packing instruments
5
Sterilization
6
4 5
6
7
2
Unloading, release and storage
4 5
The instrument cycle starts with acceptance of the used, contaminated medical products in the unclean area, where the returned items are distributed to the various trays. This is followed by cleaning and disinfection - the basic requirements for successful sterilization.
Manual cleaning
Ultrasonic cleaning
For the thorough precleaning of more complex instruments MMM offers a
modular concept of cleaning tables and accessories. This becomes a seamless
component of the workflow of your RUMED and is noted for its modularity
and flexibility and well-designed ergonomics. The wet area can be set for
precisely your requirements with precleaning basins, ultrasonic basics and
basin for final rinsing.Cleaning table
Ultramatic®
Even dried soiling and encrustations are safely and thoroughly removed
with ultrasonic cleaning. Partly, ultrasonic treatment even allows to replace
manual pre-cleaning completely by machine pre-cleaning. Thus valuable
resources are saved and a reproducible, consistently reliable cleaning result
of high quality is achieved.
The use of ultrasonics significantly reduces the exposure time and sensitive
microsurgery instruments as well as da Vinci Robotic instruments (UniSonic® only) can be cleaned in a particularly gentle manner.
Loading racks, loading trolleys and transport trolleys
MMM has designed the right rack for all types of goods. The slide-in baskets
can be neatly equipped with a variety of module attachments for various
utensils - modular, versatile and practical. Along with the height-adjustable
transport trolleys that are compatible with all racks this results in a complete
concept for seamless and safe transport of the sterile material within the
RUMED.
Transport trolley with rack
Loading and unloading roller conveyors
The automatic loading and unloading system positions and scans the next
batch on the loading trolley independently of the programme times of
the device. As soon as the device is ready for the next cycle, the batch is
automatically loaded into the chamber and the correct programme is started
based on the barcode reading.
Automatic loading and unloading
Unclean side
Cleaning and disinfection devices
MMM washer-disinfectors are available with a capacity of 10 to 30 DIN trays or as container washers. The Uniclean®
PL II series convinces with a range of different machine widths and capacities, which allow to adapt the machines
to any room situation. Individual needs are taken into account: Uniclean® PL II 10 requires a width of only 700 mm
whereas Uniclean® PL II 30, with a width of 1000 mm, is equipped with a 2 in1 tandem chamber for double capacity.
The Unclean® ML container washer offers versatile loading possibilities, particularly for bulky goods.
The single-chamber units of the Uniclean® PL II washer-disinfector series have been developed for the most
thorough processing of medical devices such as general surgery and MIS instruments, anesthesia materials, ophthalmic
instruments, containers, bowls, basins, OR shoes and others utensils as well as da Vinci robotic instruments.
The large chamber washer-disinfector Unclean® ML is used both for the processing of instruments and the cleaning
and disinfecting of bulky items such as transport trolleys, instrument containers, OR shoes, plastic containers,
receptacles and kidney bowls.
Uniclean® PL II 15 Uniclean® PL II 30 Uniclean® MLUniclean® PL II 10
UniSonic®
6 7
Steam sterilizers
MMM steam sterilizers come with various sizes of chambers from 2 STU to 21 STU and in models with one or two
doors opening to the left or right from a width of 600 mm. All programmes required for standard hospital work
are factory-set. Device options for economical and environmentally-compatible operation such as the MMM steam
manager and recovery system, water-saving vacuum pump or the MMM energy manager can significantly reduce
operating and media expenses.
The MMM SteamSpy, an electronic Bowie-Dick test permanently integrated into the steam sterilizers that outputs
the test result on the batch documentation and also acts as a continuous batch control, gives you the advantages
of increased safety, greater transparency, no requirements for chemical indicators and increased productivity by
saving time. The SteamSpy is a patented product developed by MMM that is certified and accredited as an
alternative Bowie-Dick test.
Medical products are protected from recontamination after preparation by
packing them in transparent pouches designed to maintain sterility until
they are used on a patient. The MMM SteriPack heat-sealing device ensures
that the prepared goods remain sterile with the reliable seal provided by the
sterile barrier system.
MMM low-temperature sterilizers guarantee safe sterilization of goods that
are sensitive to heat - even instruments with narrow lumina. They include
technical solutions that make the LTSF process (low-temperature steam
and formaldehyde) more economical and efficient. Our LTSF sterilizers meet
all process- and substance-specific criteria (VSK) when used properly, and
guarantee adherence to the formaldehyde limit values. As the devices meet
the highest safety standards, they can be integrated into a RUMED without
any problem.
Formomat® PL
Furniture
The RUMED is a complex workplace that places high demands on employees.
MMM supplies a complete range of furniture including work tables, washing
stations and packing tables, cabinet systems and a range of shelving systems.
Our furniture is suitable for the most severe conditions and meet all
requirements for ergonomics, hygiene and modularity.
The medical devices are removed from the cleaning and disinfecting device on the clean side, assembled into OR sets and packed for sterilization. After sterilization and picking the medical devices are delivered and are ready for use with patients.
Loading trolleys and transport trolleys
Our universal loading trolleys ensure optimum usage of the capacity of the
sterilization chamber with outstanding loading and drying properties.
The loading trolleys are transported to the device on the transport trolley
(optionally height-adjustable).
Loading trolleys and transport trolleys
Automatic loading and unloading
The ramps can be used for automatic loading and unloading of the sterilizer
or attached to a rack hatch system. They are also used for interim storage of
loading trolleys.
Ramps
ErgoTisch®
SteriPack®
Clean side
Low-temperature sterilizers
Heat-sealing devices
Selectomat® PL Selectomat® SLSelectomat® PL - Compact Line Unisteri® SL
8 9
Meeting the requirements imposed by directive, laws and standards in the everyday work of the RUMED and simultaneously maintaining the internal requirements for process quality and efficiency demands good organization – sterile goods management software meets the legal requirements for documentation and increases process safety and efficiency.
Sterile goods documentation software
Seamless logistics is essential for fault-free preparation of sterile goods. The process must be followed and infrastructure is also required to ensure protection of the sterile goods at all times. MMM has also developed automated solutions for optimum workflow of sterile goods in the RUMED for secure transport of sterile goods.
Closed transport trolleys
Logistics in the preparation process becomes that much more important
if the supply of sterile goods to the hospital is outsourced to an external
service provider. The Euro-Clean-Car system (ECC) provides security for
contaminated instruments during transport and protects the sterile
instruments after preparation.
The ECC can be docked directly to the unloading ramp of the sterilizer.
The goods are sealed to prevent unauthorised access. The ECC is fully
compatible with all MMM products.
Rack hatches, sliding windows, service hatches
MMM supplies rack hatches, sliding windows and service hatches to connect
unclean areas with clean areas. They allow racks and loading trolleys to be
moved easily from the clean to the unclean side and can be installed in a
wide range of combinations.
Service hatch
ECC
For seamless documentation, every item of sterile goods can be marked with
its own barcode, which is read by a barcode reader device as the rack enters
the chamber and documented in the batch log. The barcodes are shown on
the machine display and the machine automatically preselects a sterilization
program suitable for the detected goods. The process documentation can
optionally be linked to a sterile goods management system such as EcoSoft. Barcode scanner
EcoSoft supports and documents the entire process of preparation of medical devices and is used for admin-
istration of sterile goods as required. EcoSoft is a particularly simple and intuitive programme that will help
you structure, document and trace the work processes of the complete preparation cycle. It is simultaneously
a customized tool for meeting the documentation requirements of regulators without complications.
Process-oriented logistics Barcode system
Ecosoft
10 11
More than 60 years of expertise in processing sterile goods makes us the real experts. The MMM Group is a leading supplier of general contractor services in new construction and renovation of medical technology departments - particularly the RUMED.
MMM is more than just a manufacturer, we provide a complete, end to end solutions. Our services cover
detailed planning and consultation, products and their software, installation, logistics and service, which
includes the validation of all processes in the RUMED and right through to the end-to-end project manage-
ment of extensive construction works.
Renovation of the RUMED requires in many cases not only replacement of devices but also adapting
processes and media to new standards or a change in circumstances. The maintenance of the supply of
sterile goods for normal hospital operation during renovation work is one of the greatest challenges. The main
question at the start of the project is: renovation during continuing operation or move operations to a mobile
processing unit for medical products (MPU)?
Our experience as a total solution provider has shown: renovation during continuing operation often
involves major restrictions for personnel and processes and increased costs due to constructions
requirements to maintain hygienic requirements.
The MMM Group has the solution: a mobile processing unit for medical products.
Mobile processing unit
Installation time: • MMM base unit (4 modules for a daily output
of up to 180 StU in two-shift operation) is supplied fully equipped
• Setup, assembly and commissioning in about 5 days
• Depending on the process validation the MPU will be available for use in the shortest possible time
Site requirements: • Power, soft water, sewage pipe and RO-water
• Simple foundation for placement of containers
The MMM base module consists of 4 modules with a robust steel frame and a total floor area (TFA) of 124 m². The external dimensions are approx. 12.5 m x 10 m x 3.1 m (LxWxH). The individual modules can be transported by truck.
Modular and scalable
✔ Modules, technical building equipment and medical technology can all be leased.
✔ Renovation or construction time for the RUMED can reduced by half if operation does not need to be maintained during construction and the preparation of sterile goods can be moved to a mobile MPU
✔ Huge cost savings by eliminating the need for complicated construction of partitions for hygiene during renovations while operations are continued at the same time
✔ No interference with processes during renovations
✔ Personnel are not exposed to noise during the renovation
✔ The organisation of processing can be duplicated in the MPU
✔ Installation time for the MPU is very short compared to time-consuming partitioning of building phases during processing operations
✔ Full capacity of the MPU compared to restricted capacity during renovations and continuing operation
Advantages at a glance:
* Optional equipment with Uniclean® PL II 30 * Optional equipment with Selectomat® PL 9612-2H
Building services engineering• External doors, windows, external facade
incl. insulation, Interior fittings incl. necessary sluices
• Technical area with electrical subdistribution (optional water treatment plant and compressed air generation)
• Air conditioning system
• Internal installations (electrical, IT network, telephone, water, waste water, compressed air)
Unclean area• 2 cleaning table systems
with ultrasonic devices
• 4 washer-disinfectors Uniclean® PL II 15 *
• Racks
• Transport trolleys
• Rack return window
Clean area• 6 packing tables incl. foil cutting
workstation
• High cabinets
• 2 steam sterilizers Selectomat® PL 966-2H (6 StU) *
• 2 electric steam generators
• Transport trolleys
• Loading carts
• Loading cart return window
* Can be adapted to specific requirements. * Sizes and equipment are examples for the MPU described here.
12 13
MMM service means not only fast assistance in an emergency but also includes maintenance, repairs, training and also information on retrofit packages to increase the service life and economy of your systems and secure your investment.
Availability, reliability and qualification are the three pillars of MMM customer service.Our knowledgeable service organization is available to you around the
clock, ensuring long-lasting, trouble-free operation of the installed systems.
Thanks to our branches and representative offices optimally distributed
worldwide, we are always nearby and can very quickly be on site in an
emergency.
Foresight saves money. It is applicable to a RUMED as much as to life in gene-
ral. Our inspection and maintenance services ensure that your MMM system
will operate at its best throughout its life cycle.
We offer customized packages for
• Consultation for retrofitting modules
• Optimization of consumable materials
• Customization of your system for specific requirements,
changes in ambient conditions and legal requirements.
MMM is the market leader in Europe for process validation and is your
partner when you need to verify that your systems and processes are always
consistent with the required specifications. We offer a range of packages for
• Validation
• Calibration, adjustment
• Process optimization.
Together with our qualified partners we worldwide validate cleaning and
disinfection and also sterilization and heat-sealing processes in accordance
with the accredited standards, directive or guidelines.
MMM AcademyKnowledge is economical - ignorance can be expensive. MMM offers more
than just the expected product training sessions. As a training provider
accredited by the DGSV (Germany association for the supply of sterile
goods), we train users in hospitals in the wide range of medical, legal and
technical principles that must be taken into account for sterilization and
disinfection (training courses for experts and professionals).
Customized trainingIn addition to the basic seminars offered by the MMM Academy, we develop
customized seminars for practical in-house solutions precisely tailored for
your requirements. All content is defined in close consultation with the
target group and can cover various topics ranging from workflow manage-
ment to applications on the device. Training seminars can be conveniently
conducted on site – this is practical and particularly economical. We will be
pleased to prepare a customized training quotation on request.
• Maintenance planning• Inspection and service• Repair• 24 h hotline• Spare parts logistics – 24-hour service• Upgrade service• Process validation• Training & continuing education
MMM has also developed the ISA software (Intelligent Service Advisor), a
software program for MMM preparation machines that facilitates commu-
nication between humans and machinery. The operator - this can be the
RUMED management, in-house technicians or MMM customer service - can
monitor the status of the machine at any time by SMS or email. Problems
with the function of the machine can be corrected at short notice by quali-
fied remote diagnosis. It makes work processes more efficient and resolves
any problems much faster.
Service
CUSTOMER service that excites
Validation and testing
Inspection and preventive maintenance
Training and continuing education
14 15
Main RUMED products
Manual cleaning and ultrasonics
Product Temperature control
Capacity Basin dimensions in mm (W x H x D)
Rated power [W] / operating frequency (kHz)
External dimensions in mm (W x H x D)DIN tray ISO tray
Ultramatic® 550 • • • 510 x 300 x 200 300 / 35 750 x 890 x 680
600 • • 600 x 400 x 200 600 / 35 900 x 890 x 680
UniSonic® ***
Typ Xi, Si • 4 instruments 770 x 420 x 165 760 / 38 -
mobile • 4 instruments 770 x 420 x 165 760 / 38 1200 x 700 x 930
Cleaning and disinfection devices
Product CapacityDIN tray
Doors Usable chamber dimensions in mm
(W x H x D)
Usable chamber volume in litres
External dimensions in mm (W x H x D)1 door 2 doors
Uniclean® PL II10 10 • 563 x 704 x 609 216 700 x 2250 x 774
15 15 • 667 x 695 x 828 384 1000 x 1950 x 950
30 30 • 667 x 695 x 1656 768 1000 x 1950 x 1778
Uniclean® ML1620 30 • 900 x 2000 x 1650 3500 2410 x 2500 x 2050
2220 60 • 900 x 2000 x 2230 4014 2300 x 2500 x 2630
3120 60 • • 900 x 2000 x 3100 5580 2300 x 2500 x 3500
Steam sterilizers
Product Capacity STU
Doors Chamber (rack)Dimensions in mm
(W x H x D)
Usable chamber volume in litres
External dimensions in mm (W x H x D)1 door 2 doors
Unisteri® SL336 1 • • 320 x 320 x 625 73 600 x 1500 x 800*
636 2 • • 350 x 670 x 700 160 690 x 1720 x 967*
559 ** • • 509 x 509 x 990 254 1720 x 850 x 1302
Selectomat® SL446 V 1 • • 480 x 450 x 700 148 1200 x 1918 x 990*
559 V ** • • 509 x 509 x 990 254 1200 x 1918 x 1290
636 V 2 • • 350 x 670 x 700 160 1000 x 1918 x 990*
666 V 4 • • 650 x 700 x 690 314 1300 x 1918 x 990*
669 V 6 • • 650 x 700 x 990 453 1300 x 1918 x 1290*
6612 V 8 • • 650 x 700 x 1340 610 1300 x 1918 x 1640*
6618 V 12 • • 650 x 700 x 1940 885 1300 x 1918 x 2240
969 H 9 • • 650 x 1000 x 990 647 1900 x 1918 x 1290
9612 H 12 • • 650 x 1000 x 1340 668 1900 x 1918 x 1640
9615 H 15 • • 650 x 1000 x 640 1060 1900 x 1918 x 1940
9618 H 18 • • 650 x 1000 x 1640 1260 1900 x 1918 x 2240
9621 H 21 • 650 x 1000 x 2300 1490 1900 x 1918 x 2600
Selectomat® PL Compact Line636 2 • • 360 x 670 x 700 160 795 x 2400 x 990*
666 4 • • 652 x 702 x 690 314 995 x 2400 x 990*
669 6 • • 652 x 702 x 990 453 995 x 2400 x 1290*
6612 8 • • 652 x 702 x 1340 610 995 x 2400 x 1640*
6618 12 • • 652 x 702 x 1940 883 995 x 2400 x 2240*
Selectomat® PL Typ V636 2 • • 350 x 670 x 700 160 1000 x 1918 x 990*
666 4 • • 652 x 702 x 690 314 1300 x 1918 x 990*
669 6 • • 652 x 702 x 990 453 1300 x 1918 x 1290*
6612 8 • • 652 x 702 x 1340 610 1300 x 1918 x 1640*
Selectomat® PL Typ H666 4 • • 650 x 710 x 690 320 1600 x 1918 x 990*
669 6 • • 650 x 710 x 990 460 1600 x 1918 x 1290*
6612 8 • 650 x 710 x 1340 622 1600 x 1918 x 1640
966 6 • 650 x 1000 x 690 451 1600 x 1918 x 990
969 9 • • 650 x 1000 x 990 647 1600 x 1918 x 1290*
9612 12 • • 650 x 1000 x 1340 875 1600 x 1918 x 1640*
9618 18 • 650 x 1000 x 1940 1267 1600 x 1918 x 2240
Low-temperature formaldehyde sterilizer
ProductDoors Chamber (rack)
Dimensions in mm(W x H x D)
Usable chamber volume in litres
External dimensions in mm (W x H x D)
for 2-door models1 door 2 doors
Formomat® PL349 • • 380 x 320 x 900 110 670 x 1820 x 990
Heat-sealing devices
Product Connection to label printer
MonitoringLCD
Display
TFT colour touch display
External dimensions in mm (W x H x D)Temperature
& contact pressureSealing speed
(dwell)
SteriPack®Model 85 • • 710 x 240 x 260
Model 95 • • • • 560 x 255 x 154
Packing tables
Product Material Working
ColourElectrical connection Working height in mm External dimensions in
mm (W x D)Capri blue White grey
ErgoTisch®Height-adjustable HPL • • 230 V / 50 Hz 800 - 1050 2060 x 900
Enclosed transport trolleys
Product Capacities (STU)
Entrance height from top edge of floor in mm
Docking dimensions in mm Empty weight in kg External dimensions
in mm (W x H x D)
ECC (Euro-Clean-Car-System)666 4 625 825 70 938 x 1486 x 797
669 6 625 1125 80 1238 x 1486 x 797
966 6 390 825 70 938 x 1486 x 797
969 9 390 1125 90 1238 x 1486 x 797
Documentation softwareProduct
EcosoftSimServ Batch server for central archiving and issue of machine protocols
Batch viewer Automated process documentation
Traceability Instrument tracking and management
EcoData Labelling medical instruments and components
UNCLEAN AREA CLEAN AREA
STERILE AREA
* Depth reduced by 20 mm on single-door devices ** The chamber dimensions are not standardized according to STU / chamber dimensions are per ASME*** Only available in selected markets
Steam sterilizers
Product Capacity STU
Doors Chamber (rack)Dimensions in mm
(W x H x D)
Usable chamber volume in litres
External dimensions in mm (W x H x D)1 door 2 doors
Selectomat® PL Typ G969 9 • 720 x 1360 x 1090 1067 1900 x 1918 x 1390
9612 12 • 720 x 1360 x 1390 1361 1900 x 1918 x 1690
9618 18 • 720 x 1360 x 2140 2095 1900 x 1918 x 2440
16 17
References
18 19
RUMED Al Qatif Central HospitalAl Qatif Central Hospital, Al Qatif, Saudi Arabia
Key figuresProduction area: 400 m²
Employees: 12 / 100 %
Installed devices / equipment by MMM4 Uniclean® PL II 15
1 loading and unloading roller conveyor
1 Uniclean® ML 2220-2
3 Selectomat® PL 9612-2 H
3 automatic loading and unloading ramps
13 EcoSoft stations
External super centre for the reprocessing of medical devices Tyrol MPAT GmbH, Zirl, Austria
Key figuresProduction area: 1000 m2
Technical area: 1000 m2
Employees: 50 / 100%
Capacity: 150’000 stu/y
Installed devices / equipment by MMM15 Uniclean® PL II 15
10 loading and unloading roller conveyors
3 Uniclean® ML 3120
3 Selectomat® PL 9618
2 Selectomat® PL 969
5 automatic loading and unloading ramps
2 Formomat® PL 349-2
100 ECC transport trolleys
20 21
RUMED Deaconry Hospital StuttgartDiakonissenkrankenhaus und Paulinenhilfe gGmbH, Stuttgart, Germany
Key figuresProduction area: 680 m²
Technical area: 200 m²
Employees: 23
Capacity: 150'000 stu/y
Installed devices / equipment by MMM14 Uniclean® PL II 15
3 loading and unloading roller conveyors
2 Uniclean® ML 3120
2 Selectomat® PL 9612-2
2 automatic loading and unloading ramps
1 Selectomat® PL 966
2 Duotherm D12
2 Innova Endo E4
66 ECC transport trolleys
RUMED Cantonal Hospital MuensterlingenSpital Thurgau AG, Frauenfeld, Switzerland
Key figuresArea: 414 m2
Employees: 19
Capacity: 40’000 stu/y
Installed devices / equipment by MMM6 Uniclean® PL II 15
6 loading and unloading roller conveyor
1 Uniclean® ML 3120
3 Selectomat® PL 9612-2
3 automatic loading and unloading ramps
22 23
MM
M HEA
LTHCARE
MMM LIFE SCIENCE
MMM WORLDWIDE
MMM Münchener Medizin Mechanik GmbHSemmelweisstraße 682152 Planegg / Munich, Germany Tel.: +49 89 89918-0Fax: +49 89 89918-118www.mmmgroup.com
MMM GroupMMM has been operating worldwide as one of the lead-
ing system providers in the service of health since 1954.
With a complete range of products and services relat-
ing to all aspects of cleaning, disinfection and ster-
ilization systems for the areas of Healthcare and Life Science, MMM has positioned itself as a crucial quality
and innovation driver in the German and international
market. Our products are individually adapted to the
requirements of our customers all over the world. The
high vertical range of manufacturing in our production
plants ensures that we fulfil the strictest demands of
quality in the medical technology sector. More than 1200
employees apply their expertise and dedication to the
mission of the MMM Group: Protecting human health.
04.2
019
| Su
bjec
t to
err
ata
and
chan
ges.
Imag
es f
or il
lust
rati
on p
urpo
ses
only
.
RUM
ED S
ervi
ce O
verv
iew