HORIZONTAL PLAN CABINET

WISHBONE TABLE SERIES

www.planex.com.au

The Wishbone table collection combines Australian design and manufacturing equally at home in commercial, hospitality and residential environments.

Wishbone explores the versatility of steel, its strength and diversity of appeal. The signature of the Wishbone table is the simple leg design. This forked support attaches to the top, and is reminiscent of the steel structural supports of architecture and bridge engineering.

Wishbone is adaptable and offers limitless combinations to suit any interior. Legs are available in two heights and 120 colours in powder-coated mild steel. Tops are available in four sizes, black or white laminate and Queensland Walnut veneer options.

Create an elegant dining setting with a timber-veneer table or choose bright colours and clean lines to create interest in living or office areas.

“In Wishbone we have come up with a design that suggests an inherent strength, security and longevity.”

Alexander Lotersztain.

Made in Australia

planex.com.au

Australian MadeOur products are the result of our modern facility, supported by the energy, imagination & experience of our workmates. Many of our team have been practicing their craft for two generations.

ISO14001 Built in 2003, our new manufacturing facility was designed to be energy efficient. All products made by Planex are prepared using the standards and practices of ISO14001 certification.

10 Year WarrantyPlanex undertakes to replace or repair any component found to be faulty in material or workmanship within a period of ten years from the date of manufacture. Full warranty details are available on the Planex website.

Construction

Features: Fully welded construction provides strength and stability allowing units to be stacked two high.Full-width sheet metal return at rear of drawer prevents plans from being damaged or curling. Units delivered outside Melbourne metro require full carton packing on a timber pallet, charges apply.Colour: Available in over 100 colours and finishes.Finish: High performance, inert powdercoat finish, including iron phosphate pre-treatment.Accessories: Need to be ordered separately. Packaging: Packaging charge applies for deliveries outside Melbourne metro.

Lead-time: 4 weeks ex-works Manufactured in Australia by Planex.

HORIZONTAL PLAN CABINET

As an ISO14001 certified manufacturer, our goal is to minimize harmful effects on the environment caused by our manufacturing activities, and to achieve continual improvement of our environmental performance.

AFRDI

WISHBONE TABLE SERIES

www.planex.com.au

The Wishbone table collection combines Australian design and manufacturing equally at home in commercial, hospitality and residential environments.

Wishbone explores the versatility of steel, its strength and diversity of appeal. The signature of the Wishbone table is the simple leg design. This forked support attaches to the top, and is reminiscent of the steel structural supports of architecture and bridge engineering.

Wishbone is adaptable and offers limitless combinations to suit any interior. Legs are available in two heights and 120 colours in powder-coated mild steel. Tops are available in four sizes, black or white laminate and Queensland Walnut veneer options.

Create an elegant dining setting with a timber-veneer table or choose bright colours and clean lines to create interest in living or office areas.

“In Wishbone we have come up with a design that suggests an inherent strength, security and longevity.”

Alexander Lotersztain.

Made in Australia

planex.com.au

Traditional plan chests available in 4 sizes to suit paper sizes A1 to AO+ Available in either 5 or 10 drawer configurations. Horizontal plan storage requires more floor space than vertical plan cabinets and are more appropriate for the storage of thick or fragile works or where attaching a suspension strip is not appropriate.

Five Drawer Cabinet Ten Drawer Cabinet

A1 A1Height 470 Height 470Width 950 Width 950Depth 650 Depth 650kg 85 kg 97Code 16-HA-5 Code 16-HA-10

B1 B1Height 470 Height 470Width 1170 Width 1170Depth 900 Depth 900kg 92 kg 139Code 16-HB-5 Code 16-HB-10

A0 A0Height 470 Height 470Width 1295 Width 1295Depth 900 Depth 900kg 106 kg 160Code 16-HC-5 Code 16-HC-10

A0+ A0+Height 470 Height 470Width 1470 Width 1470Depth 900 Depth 900kg 126 kg 190Code 16-HCD-5 Code 16-HCD-10

PLAN CABINET STAND

A1 B1 A0

Height 300 Height 300 Height 300 Width 960 Width 1180 Width 1305 Depth 660 Depth 910 Depth 910 kg 12 kg 13 kg 14 Code 16-HSA Code 16-HSB Code 16-HSC

A0+

Height 300Width 1480 Depth 910kg 16Code 16-HCD

Cabinets can be stacked two high

HORIZONTAL PLAN CABINET DIMENSIONS AND CODES

WISHBONE TABLE SERIES

www.planex.com.au

The Wishbone table collection combines Australian design and manufacturing equally at home in commercial, hospitality and residential environments.

Wishbone explores the versatility of steel, its strength and diversity of appeal. The signature of the Wishbone table is the simple leg design. This forked support attaches to the top, and is reminiscent of the steel structural supports of architecture and bridge engineering.

Wishbone is adaptable and offers limitless combinations to suit any interior. Legs are available in two heights and 120 colours in powder-coated mild steel. Tops are available in four sizes, black or white laminate and Queensland Walnut veneer options.

Create an elegant dining setting with a timber-veneer table or choose bright colours and clean lines to create interest in living or office areas.

“In Wishbone we have come up with a design that suggests an inherent strength, security and longevity.”

Alexander Lotersztain.

Made in Australia

planex.com.au

Manufactured in Melbourne by PlanexFeatures: Fully welded construction provides strength and stability. A full-width metal return at rear of the drawer prevents plans from being damaged or curling.Colour: Available in over 100 colours.Green Star: VOC Emissions Test Certified.Manufactured under ISO14001Castors are rated at 400kg each.Cabinets cannot be stacked two-high when fitted with castors.

FIVE DRAWER CABINET TEN DRAWER CABINET

A1 A1Height 605 Height 605Width 950 Width 950Depth 650 Depth 650kg 85 kg 97Code 16-HA-05-C100 Code 16-HA-10-C100

B1 B1Height 605 Height 605Width 1170 Width 1170Depth 900/ Depth 900kg 92 kg 139Code 16-HB-05-C100 Code 16-HB-10-C100

A0 A0Height 605 Height 605Width 1295 Width 1295Depth 900/ Depth 900kg 106 kg 160Code 16-HC-05-C100 Code 16-HC-10-C100

A0+ A0+Height 605 Height 605Width 1470 Width 1470Depth 900 Depth 900kg 126 kg 190Code 16-HCD-05-C100 Code 16-HCD-10-C100

PLAN DRAWER INTERNAL DIMENSIONS

FIVE DRAWER TEN DRAWER

A1 A1Height 50 Height 25Width 867 Width 867Depth 610 Depth 610

B1 B1Height 50 Height 25Width 1086 Width 1086Depth 850 Depth 845

A0 A0Height 50 Height 25Width 1211 Width 1211Depth 850 Depth 845

A0+ A0+Height 50 Height 25Width 1386 Width 1386Depth 850 Depth 845

MOBILE PLAN CABINET DIMENSIONS AND CODES

WISHBONE TABLE SERIES

www.planex.com.au

The Wishbone table collection combines Australian design and manufacturing equally at home in commercial, hospitality and residential environments.

Wishbone explores the versatility of steel, its strength and diversity of appeal. The signature of the Wishbone table is the simple leg design. This forked support attaches to the top, and is reminiscent of the steel structural supports of architecture and bridge engineering.

Wishbone is adaptable and offers limitless combinations to suit any interior. Legs are available in two heights and 120 colours in powder-coated mild steel. Tops are available in four sizes, black or white laminate and Queensland Walnut veneer options.

Create an elegant dining setting with a timber-veneer table or choose bright colours and clean lines to create interest in living or office areas.

“In Wishbone we have come up with a design that suggests an inherent strength, security and longevity.”

Alexander Lotersztain.

Made in Australia

planex.com.au